void
pckbc_attach(struct pckbc_softc *sc, int flags)
{
struct pckbc_internal *t;
bus_space_tag_t iot;
bus_space_handle_t ioh_d, ioh_c;
int haskbd = 0, res;
u_char cmdbits = 0;
t = sc->id;
iot = t->t_iot;
ioh_d = t->t_ioh_d;
ioh_c = t->t_ioh_c;
if (pckbc_console == 0) {
timeout_set(&t->t_cleanup, pckbc_cleanup, t);
timeout_set(&t->t_poll, pckbc_poll, t);
}
/* flush */
(void) pckbc_poll_data1(iot, ioh_d, ioh_c, PCKBC_KBD_SLOT, 0);
/* set initial cmd byte */
if (!pckbc_put8042cmd(t)) {
#if defined(__i386__) || defined(__amd64__)
if (!ISSET(flags, PCKBCF_FORCE_KEYBOARD_PRESENT)) {
pckbc_release_console();
return;
}
#endif
printf("kbc: cmd word write error\n");
return;
}
/*
* XXX Don't check the keyboard port. There are broken keyboard controllers
* which don't pass the test but work normally otherwise.
*/
#if 0
/*
* check kbd port ok
*/
if (!pckbc_send_cmd(iot, ioh_c, KBC_KBDTEST))
return;
res = pckbc_poll_data1(iot, ioh_d, ioh_c, PCKBC_KBD_SLOT, 0);
/*
* Normally, we should get a "0" here.
* But there are keyboard controllers behaving differently.
*/
if (res == 0 || res == 0xfa || res == 0x01 || res == 0xab) {
#ifdef PCKBCDEBUG
if (res != 0)
printf("kbc: returned %x on kbd slot test\n", res);
#endif
if (pckbc_attach_slot(sc, PCKBC_KBD_SLOT, 0)) {
cmdbits |= KC8_KENABLE;
haskbd = 1;
}
} else {
printf("kbc: kbd port test: %x\n", res);
return;
}
#else
if (pckbc_attach_slot(sc, PCKBC_KBD_SLOT, 0)) {
cmdbits |= KC8_KENABLE;
haskbd = 1;
}
#endif /* 0 */
/*
* Check aux port ok.
* Avoid KBC_AUXTEST because it hangs some older controllers
* (eg UMC880?).
*/
if (!pckbc_send_cmd(iot, ioh_c, KBC_AUXECHO)) {
printf("kbc: aux echo error 1\n");
goto nomouse;
}
if (!pckbc_wait_output(iot, ioh_c)) {
printf("kbc: aux echo error 2\n");
goto nomouse;
}
bus_space_write_1(iot, ioh_d, 0, 0x5a); /* a random value */
res = pckbc_poll_data1(iot, ioh_d, ioh_c, PCKBC_AUX_SLOT, 1);
if (ISSET(t->t_flags, PCKBC_NEED_AUXWRITE)) {
/*
* The following code is necessary to find the aux port on the
* oqo-1 machine, among others. However if confuses old
* (non-ps/2) keyboard controllers (at least UMC880x again).
*/
if (res == -1) {
/* Read of aux echo timed out, try again */
if (!pckbc_send_cmd(iot, ioh_c, KBC_AUXWRITE))
goto nomouse;
if (!pckbc_wait_output(iot, ioh_c))
goto nomouse;
bus_space_write_1(iot, ioh_d, 0, 0x5a);
res = pckbc_poll_data1(iot, ioh_d, ioh_c,
PCKBC_AUX_SLOT, 1);
DPRINTF("kbc: aux echo: %x\n", res);
}
}
if (res != -1) {
/*
* In most cases, the 0x5a gets echoed.
* Some old controllers (Gateway 2000 circa 1993)
* return 0xfe here.
* We are satisfied if there is anything in the
* aux output buffer.
*/
DPRINTF("kbc: aux echo: %x\n", res);
t->t_haveaux = 1;
if (pckbc_attach_slot(sc, PCKBC_AUX_SLOT, 0))
cmdbits |= KC8_MENABLE;
}
#ifdef PCKBCDEBUG
else
printf("kbc: aux echo test failed\n");
#endif
#if defined(__i386__) || defined(__amd64__)
if (haskbd == 0 && !ISSET(flags, PCKBCF_FORCE_KEYBOARD_PRESENT)) {
if (t->t_haveaux) {
if (pckbc_attach_slot(sc, PCKBC_KBD_SLOT, 1))
cmdbits |= KC8_KENABLE;
} else {
pckbc_release_console();
}
}
#endif
nomouse:
/* enable needed interrupts */
t->t_cmdbyte |= cmdbits;
if (!pckbc_put8042cmd(t))
printf("kbc: cmd word write error\n");
}
void
pckbc_attach(struct pckbc_softc *sc)
{
struct pckbc_internal *t;
bus_space_tag_t iot;
bus_space_handle_t ioh_d, ioh_c;
int res;
u_char cmdbits = 0;
t = sc->id;
iot = t->t_iot;
ioh_d = t->t_ioh_d;
ioh_c = t->t_ioh_c;
t->t_pt = pckbport_attach(t, &pckbc_ops);
if (t->t_pt == NULL) {
aprint_error(": attach failed\n");
return;
}
/* flush */
(void) pckbc_poll_data1(t, PCKBC_KBD_SLOT);
/* set initial cmd byte */
if (!pckbc_put8042cmd(t)) {
printf("pckbc: cmd word write error\n");
return;
}
/*
* XXX Don't check the keyboard port. There are broken keyboard controllers
* which don't pass the test but work normally otherwise.
*/
#if 0
/*
* check kbd port ok
*/
if (!pckbc_send_cmd(iot, ioh_c, KBC_KBDTEST))
return;
res = pckbc_poll_data1(t, PCKBC_KBD_SLOT, 0);
/*
* Normally, we should get a "0" here.
* But there are keyboard controllers behaving differently.
*/
if (res == 0 || res == 0xfa || res == 0x01 || res == 0xab) {
#ifdef PCKBCDEBUG
if (res != 0)
printf("pckbc: returned %x on kbd slot test\n", res);
#endif
if (pckbc_attach_slot(sc, PCKBC_KBD_SLOT))
cmdbits |= KC8_KENABLE;
} else {
printf("pckbc: kbd port test: %x\n", res);
return;
}
#else
if (pckbc_attach_slot(sc, PCKBC_KBD_SLOT))
cmdbits |= KC8_KENABLE;
#endif /* 0 */
/*
* Check aux port ok.
* Avoid KBC_AUXTEST because it hangs some older controllers
* (eg UMC880?).
*/
if (!pckbc_send_cmd(iot, ioh_c, KBC_AUXECHO)) {
printf("pckbc: aux echo error 1\n");
goto nomouse;
}
if (!pckbc_wait_output(iot, ioh_c)) {
printf("pckbc: aux echo error 2\n");
goto nomouse;
}
t->t_haveaux = 1;
bus_space_write_1(iot, ioh_d, 0, 0x5a); /* a random value */
res = pckbc_poll_data1(t, PCKBC_AUX_SLOT);
/*
* The following is needed to find the aux port on the Tadpole
* SPARCle.
*/
if (res == -1 && ISSET(t->t_flags, PCKBC_NEED_AUXWRITE)) {
/* Read of aux echo timed out, try again */
if (!pckbc_send_cmd(iot, ioh_c, KBC_AUXWRITE))
goto nomouse;
if (!pckbc_wait_output(iot, ioh_c))
goto nomouse;
bus_space_write_1(iot, ioh_d, 0, 0x5a);
res = pckbc_poll_data1(t, PCKBC_AUX_SLOT);
}
if (res != -1) {
/*
* In most cases, the 0x5a gets echoed.
* Some older controllers (Gateway 2000 circa 1993)
* return 0xfe here.
* We are satisfied if there is anything in the
* aux output buffer.
*/
if (pckbc_attach_slot(sc, PCKBC_AUX_SLOT))
cmdbits |= KC8_MENABLE;
} else {
#ifdef PCKBCDEBUG
printf("pckbc: aux echo test failed\n");
#endif
t->t_haveaux = 0;
}
nomouse:
/* enable needed interrupts */
t->t_cmdbyte |= cmdbits;
if (!pckbc_put8042cmd(t))
printf("pckbc: cmd word write error\n");
}
