phStatus_t phhalHw_ReadRegister(
void * pDataParams,
uint8_t bAddress,
uint8_t * pValue
)
{
phStatus_t PH_MEMLOC_REM status;
PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phhalHw_ReadRegister");
/*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
PH_LOG_HELPER_ALLOCATE_PARAMNAME(bAddress);
PH_LOG_HELPER_ALLOCATE_PARAMNAME(pValue);
PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bAddress_log, &bAddress);
PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
PH_ASSERT_NULL (pDataParams);
PH_ASSERT_NULL (pValue);
/* Check data parameters */
if (PH_GET_COMPCODE(pDataParams) != PH_COMP_HAL)
{
PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_HAL);
}
/* perform operation on active layer */
switch (PH_GET_COMPID(pDataParams))
{
#ifdef NXPBUILD__PHHAL_HW_RC663
case PHHAL_HW_RC663_ID:
status = phhalHw_Rc663_ReadRegister((phhalHw_Rc663_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_RC663 */
#ifdef NXPBUILD__PHHAL_HW_RC523
case PHHAL_HW_RC523_ID:
status = phhalHw_Rc523_ReadRegister((phhalHw_Rc523_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_RC523 */
#ifdef NXPBUILD__PHHAL_HW_RD70X
case PHHAL_HW_RD70X_ID:
status = phhalHw_Rd70x_ReadRegister((phhalHw_Rd70x_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_RD70X */
#ifdef NXPBUILD__PHHAL_HW_RD710
case PHHAL_HW_RD710_ID:
status = phhalHw_Rd710_ReadRegister((phhalHw_Rd710_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_RD710 */
#ifdef NXPBUILD__PHHAL_HW_CALLBACK
case PHHAL_HW_CALLBACK_ID:
status = phhalHw_Callback_ReadRegister((phhalHw_Callback_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_CALLBACK */
#ifdef NXPBUILD__PHHAL_HW_RC632
case PHHAL_HW_RC632_ID:
status = phhalHw_Rc632_ReadRegister((phhalHw_Rc632_DataParams_t *)pDataParams, bAddress, pValue);
break;
#endif /* NXPBUILD__PHHAL_HW_RC632 */
default:
status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_HAL);
break;
}
PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, pValue_log, pValue);
PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
return status;
}
phStatus_t NfcRdLibInit(void)
{
phStatus_t status;
/*
* Initialize the Reader BAL (Bus Abstraction Layer) component
*/
status = phbalReg_Stub_Init(&sBalReader, sizeof(phbalReg_Stub_DataParams_t));
CHECK_SUCCESS(status);
/*
* Initialize the OSAL Events.
*/
status = phOsal_Event_Init();
CHECK_STATUS(status);
// Start interrupt thread
Set_Interrupt();
/*
* Set HAL type in BAL
*/
#ifdef NXPBUILD__PHHAL_HW_PN5180
status = phbalReg_SetConfig(&sBalReader, PHBAL_REG_CONFIG_HAL_HW_TYPE, PHBAL_REG_HAL_HW_PN5180);
#endif
#ifdef NXPBUILD__PHHAL_HW_RC523
status = phbalReg_SetConfig(&sBalReader, PHBAL_REG_CONFIG_HAL_HW_TYPE, PHBAL_REG_HAL_HW_RC523);
#endif
#ifdef NXPBUILD__PHHAL_HW_RC663
status = phbalReg_SetConfig(&sBalReader, PHBAL_REG_CONFIG_HAL_HW_TYPE, PHBAL_REG_HAL_HW_RC663);
#endif
CHECK_STATUS(status);
status = phbalReg_SetPort(&sBalReader, (uint8_t *) SPI_CONFIG);
CHECK_STATUS(status);
/*
* Open BAL
*/
status = phbalReg_OpenPort(&sBalReader);
CHECK_STATUS(status);
/*
* Initialize the Reader HAL (Hardware Abstraction Layer) component
*/
status = phhalHw_Nfc_IC_Init(&sHal_Nfc_Ic,
sizeof(phhalHw_Nfc_Ic_DataParams_t),
&sBalReader,
0, bHalBufferTx, sizeof(bHalBufferTx), bHalBufferRx, sizeof(bHalBufferRx));
CHECK_SUCCESS(status);
/*
* Set the parameter to use the SPI interface
*/
sHal_Nfc_Ic.sHal.bBalConnectionType = PHHAL_HW_BAL_CONNECTION_SPI;
Configure_Device(&sHal_Nfc_Ic);
/*
* Set the generic pointer
*/
pHal = &sHal_Nfc_Ic.sHal;
/*
* Initializing specific objects for the communication with MIFARE (R) Classic cards. The MIFARE (R) Classic card
* is compliant of ISO 14443-3 and ISO 14443-4
*/
/*
* Initialize the I14443-A PAL layer
*/
status = phpalI14443p3a_Sw_Init(&spalI14443p3a, sizeof(phpalI14443p3a_Sw_DataParams_t), &sHal_Nfc_Ic.sHal);
CHECK_STATUS(status);
/*
* Initialize the I14443-A PAL component
*/
status = phpalI14443p4a_Sw_Init(&spalI14443p4a, sizeof(phpalI14443p4a_Sw_DataParams_t), &sHal_Nfc_Ic.sHal);
CHECK_STATUS(status);
/*
* Initialize the I14443-4 PAL component
*/
status = phpalI14443p4_Sw_Init(&spalI14443p4, sizeof(phpalI14443p4_Sw_DataParams_t), &sHal_Nfc_Ic.sHal);
CHECK_STATUS(status);
/*
* Initialize the I14443-B PAL component
*/
status = phpalI14443p3b_Sw_Init(&spalI14443p3b, sizeof(phpalI14443p3b_Sw_DataParams_t), &sHal_Nfc_Ic.sHal);
CHECK_STATUS(status);
/*
* Initialize the MIFARE PAL component
*/
status = phpalMifare_Sw_Init(&spalMifare, sizeof(phpalMifare_Sw_DataParams_t), &sHal_Nfc_Ic.sHal, NULL);
CHECK_STATUS(status);
/*
* Initialize the discover component
*/
status = phacDiscLoop_Sw_Init(&sDiscLoop, sizeof(phacDiscLoop_Sw_DataParams_t), &sHal_Nfc_Ic.sHal);
CHECK_SUCCESS(status);
/*
* Load profile for Discovery loop
*/
LoadProfile();
status = phalMfc_Sw_Init(&salMfc, sizeof(phalMfc_Sw_DataParams_t), &spalMifare, NULL);
CHECK_STATUS(status);
/*
* Read the version of the reader IC
*/
#if defined NXPBUILD__PHHAL_HW_RC523
status = phhalHw_Rc523_ReadRegister(&sHal_Nfc_Ic.sHal, PHHAL_HW_RC523_REG_VERSION, &bDataBuffer[0]);
CHECK_SUCCESS(status);
#endif
#if defined NXPBUILD__PHHAL_HW_RC663
status = phhalHw_Rc663_ReadRegister(&sHal_Nfc_Ic.sHal, PHHAL_HW_RC663_REG_VERSION, &bDataBuffer[0]);
CHECK_SUCCESS(status);
#endif
/*
* Return Success
*/
return PH_ERR_SUCCESS;
}
