int
main(int argc, char *argv[])
{
struct pidfh *pfh = NULL;
int ch, nochdir, noclose, errcode;
const char *pidfile, *user;
pid_t otherpid;
nochdir = noclose = 1;
pidfile = user = NULL;
while ((ch = getopt(argc, argv, "-cfp:u:")) != -1) {
switch (ch) {
case 'c':
nochdir = 0;
break;
case 'f':
noclose = 0;
break;
case 'p':
pidfile = optarg;
break;
case 'u':
user = optarg;
break;
default:
usage();
}
}
argc -= optind;
argv += optind;
if (argc == 0)
usage();
if (user != NULL)
restrict_process(user);
/*
* Try to open the pidfile before calling daemon(3),
* to be able to report the error intelligently
*/
if (pidfile) {
pfh = pidfile_open(pidfile, 0600, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
errx(3, "process already running, pid: %d",
otherpid);
}
err(2, "pidfile ``%s''", pidfile);
}
}
if (daemon(nochdir, noclose) == -1)
err(1, NULL);
/* Now that we are the child, write out the pid */
if (pidfile)
pidfile_write(pfh);
execvp(argv[0], argv);
/*
* execvp() failed -- unlink pidfile if any, and
* report the error
*/
errcode = errno; /* Preserve errcode -- unlink may reset it */
if (pidfile)
pidfile_remove(pfh);
/* The child is now running, so the exit status doesn't matter. */
errc(1, errcode, "%s", argv[0]);
}
void
tap_init(void)
{
channel_t *chan;
struct ifreq ifr;
int fd, s;
char pidfile[PATH_MAX];
fd = open(interface_name, O_RDWR);
if (fd == -1) {
log_err("Could not open \"%s\": %m", interface_name);
exit(EXIT_FAILURE);
}
memset(&ifr, 0, sizeof(ifr));
if (ioctl(fd, TAPGIFNAME, &ifr) == -1) {
log_err("Could not get interface name: %m");
exit(EXIT_FAILURE);
}
s = socket(AF_INET, SOCK_DGRAM, 0);
if (s == -1) {
log_err("Could not open PF_LINK socket: %m");
exit(EXIT_FAILURE);
}
ifr.ifr_addr.sa_family = AF_LINK;
ifr.ifr_addr.sa_len = ETHER_ADDR_LEN;
b2eaddr(ifr.ifr_addr.sa_data, &local_bdaddr);
if (ioctl(s, SIOCSIFLLADDR, &ifr) == -1) {
log_err("Could not set %s physical address: %m", ifr.ifr_name);
exit(EXIT_FAILURE);
}
if (ioctl(s, SIOCGIFFLAGS, &ifr) == -1) {
log_err("Could not get interface flags: %m");
exit(EXIT_FAILURE);
}
if ((ifr.ifr_flags & IFF_UP) == 0) {
ifr.ifr_flags |= IFF_UP;
if (ioctl(s, SIOCSIFFLAGS, &ifr) == -1) {
log_err("Could not set IFF_UP: %m");
exit(EXIT_FAILURE);
}
}
close(s);
log_info("Using interface %s with addr %s", ifr.ifr_name,
ether_ntoa((struct ether_addr *)&ifr.ifr_addr.sa_data));
chan = channel_alloc();
if (chan == NULL)
exit(EXIT_FAILURE);
chan->send = tap_send;
chan->recv = tap_recv;
chan->mru = ETHER_HDR_LEN + ETHER_MAX_LEN;
memcpy(chan->raddr, ifr.ifr_addr.sa_data, ETHER_ADDR_LEN);
memcpy(chan->laddr, ifr.ifr_addr.sa_data, ETHER_ADDR_LEN);
chan->state = CHANNEL_OPEN;
if (!channel_open(chan, fd))
exit(EXIT_FAILURE);
snprintf(pidfile, sizeof(pidfile), "%s/%s.pid",
_PATH_VARRUN, ifr.ifr_name);
chan->pfh = pidfile_open(pidfile, 0600, NULL);
if (chan->pfh == NULL)
log_err("can't create pidfile");
else if (pidfile_write(chan->pfh) < 0) {
log_err("can't write pidfile");
pidfile_remove(chan->pfh);
chan->pfh = NULL;
}
}
int main(int argc, char const* argv[])
{
ir::IRXDaemon* instance;
OperationEnum operation;
ModeEnum mode;
struct pidfh* pfh;
pid_t pid;
bool daemonize;
int i;
int result(EXIT_SUCCESS);
if ((instance = ir::IRXDaemon::_new()) != NULL) {
operation = OPERATION_UNKNOWN;
mode = MODE_UNKNOWN;
if (argc > 1) {
if ((result = instance->usage(argc, argv)) == EXIT_SUCCESS) {
for (i = 1; i < argc; ++i) {
if (strcmp(argv[i], "start") == 0) {
operation = OPERATION_START;
}
else if (strcmp(argv[i], "restart") == 0) {
operation = OPERATION_RESTART;
}
else if (strcmp(argv[i], "stop") == 0) {
operation = OPERATION_STOP;
}
else if (strcmp(argv[i], "--daemon") == 0) {
mode = MODE_DAEMON;
}
else if (strcmp(argv[i], "--application") == 0) {
mode = MODE_APPLICATION;
}
}
}
}
if (result == EXIT_SUCCESS) {
if (operation == OPERATION_UNKNOWN) {
operation = OPERATION_START;
}
if (mode == MODE_UNKNOWN) {
mode = MODE_DAEMON;
}
g_quit = false;
signal(SIGHUP, onSigHUP);
signal(SIGINT, onSigINT);
signal(SIGTERM, onSigTERM);
signal(SIGCHLD, SIG_IGN);
switch (operation) {
case OPERATION_RESTART:
case OPERATION_STOP:
if ((pfh = pidfile_open(NULL, 0600, &pid)) != NULL) {
instance->log(LOG_NOTICE, "already stopped");
pidfile_remove(pfh);
}
else {
switch (errno) {
case EEXIST:
if (kill(pid, SIGTERM) == 0) {
instance->log(LOG_NOTICE, "stopping pid = %d...", pid);
while (true) {
if (g_quit) {
result = EXIT_FAILURE;
break;
}
if (kill(pid, 0) != 0) {
instance->log(LOG_NOTICE, "stopping done");
break;
}
sleep(1);
}
}
else {
instance->log(LOG_ERR, "can't stop pid = %d [%m]", pid);
result = EX_OSERR;
}
break;
case EACCES:
instance->log(LOG_ERR, "run as super user");
result = EX_OSERR;
break;
default:
instance->log(LOG_ERR, "can't stop [%m]");
result = EX_OSERR;
break;
}
}
break;
default:
// nop
break;
}
if (result == EXIT_SUCCESS) {
switch (operation) {
case OPERATION_START:
case OPERATION_RESTART:
if ((pfh = pidfile_open(NULL, 0600, &pid)) != NULL) {
instance->log(LOG_NOTICE, "starting pid = %d...", getpid());
daemonize = true;
if (mode == MODE_APPLICATION) {
daemonize = false;
}
#ifdef __APPLE__
if (getppid() == 1) {
daemonize = false;
}
#endif
if (daemonize) {
if (daemon(0, 0) != 0) {
instance->log(LOG_ERR, "can't daemonize pid = %d [%m]", getpid());
result = EX_OSERR;
}
}
if (result == EXIT_SUCCESS) {
instance->log(LOG_NOTICE, "changing pid = %d...", getpid());
pidfile_write(pfh);
if ((result = instance->initialize()) == EXIT_SUCCESS) {
instance->log(LOG_NOTICE, "starting done");
while (true) {
if (g_quit) {
result = EXIT_FAILURE;
break;
}
instance->loop();
}
}
else {
instance->log(LOG_ERR, "can't start pid = %d [%d]", getpid(), result);
}
instance->terminate();
}
pidfile_remove(pfh);
}
else {
switch (errno) {
case EEXIST:
instance->log(LOG_ERR, "already started pid = %d", pid);
result = EX_OSERR;
break;
case EACCES:
instance->log(LOG_ERR, "run as super user");
result = EX_OSERR;
break;
default:
instance->log(LOG_ERR, "can't start [%m]");
result = EX_OSERR;
break;
}
}
break;
default:
// nop
break;
}
}
}
ir::IRXDaemon::_delete(instance);
}
else {
result = EXIT_FAILURE;
}
return result;
}
int
main(int argc, char *argv[])
{
struct pidfh *ppfh, *pfh;
sigset_t mask, oldmask;
int ch, nochdir, noclose, restart, serrno;
const char *pidfile, *ppidfile, *user;
pid_t otherpid, pid;
nochdir = noclose = 1;
restart = 0;
ppidfile = pidfile = user = NULL;
while ((ch = getopt(argc, argv, "cfp:P:ru:")) != -1) {
switch (ch) {
case 'c':
nochdir = 0;
break;
case 'f':
noclose = 0;
break;
case 'p':
pidfile = optarg;
break;
case 'P':
ppidfile = optarg;
break;
case 'r':
restart = 1;
break;
case 'u':
user = optarg;
break;
default:
usage();
}
}
argc -= optind;
argv += optind;
if (argc == 0)
usage();
ppfh = pfh = NULL;
/*
* Try to open the pidfile before calling daemon(3),
* to be able to report the error intelligently
*/
if (pidfile != NULL) {
pfh = pidfile_open(pidfile, 0600, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
errx(3, "process already running, pid: %d",
otherpid);
}
err(2, "pidfile ``%s''", pidfile);
}
}
/* Do the same for actual daemon process. */
if (ppidfile != NULL) {
ppfh = pidfile_open(ppidfile, 0600, &otherpid);
if (ppfh == NULL) {
serrno = errno;
pidfile_remove(pfh);
errno = serrno;
if (errno == EEXIST) {
errx(3, "process already running, pid: %d",
otherpid);
}
err(2, "ppidfile ``%s''", ppidfile);
}
}
if (daemon(nochdir, noclose) == -1) {
warn("daemon");
goto exit;
}
/* Write out parent pidfile if needed. */
pidfile_write(ppfh);
/*
* If the pidfile or restart option is specified the daemon
* executes the command in a forked process and wait on child
* exit to remove the pidfile or restart the command. Normally
* we don't want the monitoring daemon to be terminated
* leaving the running process and the stale pidfile, so we
* catch SIGTERM and forward it to the children expecting to
* get SIGCHLD eventually.
*/
pid = -1;
if (pidfile != NULL || restart) {
/*
* Restore default action for SIGTERM in case the
* parent process decided to ignore it.
*/
if (signal(SIGTERM, SIG_DFL) == SIG_ERR) {
warn("signal");
goto exit;
}
/*
* Because SIGCHLD is ignored by default, setup dummy handler
* for it, so we can mask it.
*/
if (signal(SIGCHLD, dummy_sighandler) == SIG_ERR) {
warn("signal");
goto exit;
}
/*
* Block interesting signals.
*/
sigemptyset(&mask);
sigaddset(&mask, SIGTERM);
sigaddset(&mask, SIGCHLD);
if (sigprocmask(SIG_SETMASK, &mask, &oldmask) == -1) {
warn("sigprocmask");
goto exit;
}
/*
* Try to protect against pageout kill. Ignore the
* error, madvise(2) will fail only if a process does
* not have superuser privileges.
*/
(void)madvise(NULL, 0, MADV_PROTECT);
restart:
/*
* Spawn a child to exec the command, so in the parent
* we could wait for it to exit and remove pidfile.
*/
pid = fork();
if (pid == -1) {
warn("fork");
goto exit;
}
}
if (pid <= 0) {
if (pid == 0) {
/* Restore old sigmask in the child. */
if (sigprocmask(SIG_SETMASK, &oldmask, NULL) == -1)
err(1, "sigprocmask");
}
/* Now that we are the child, write out the pid. */
pidfile_write(pfh);
if (user != NULL)
restrict_process(user);
execvp(argv[0], argv);
/*
* execvp() failed -- report the error. The child is
* now running, so the exit status doesn't matter.
*/
err(1, "%s", argv[0]);
}
setproctitle("%s[%d]", argv[0], pid);
if (wait_child(pid, &mask) == 0 && restart) {
sleep(1);
goto restart;
}
exit:
pidfile_remove(pfh);
pidfile_remove(ppfh);
exit(1); /* If daemon(3) succeeded exit status does not matter. */
}
int
main(int argc, char * argv[])
{
struct timeval timeout;
fd_set fdset;
int nfds;
struct pidfh *pfh = NULL;
const char *pidfile = NULL;
int freq, curfreq, initfreq, *freqs, i, j, *mwatts, numfreqs, load;
int minfreq = -1, maxfreq = -1;
int ch, mode, mode_ac, mode_battery, mode_none, idle, to;
uint64_t mjoules_used;
size_t len;
/* Default mode for all AC states is adaptive. */
mode_ac = mode_none = MODE_HIADAPTIVE;
mode_battery = MODE_ADAPTIVE;
cpu_running_mark = DEFAULT_ACTIVE_PERCENT;
cpu_idle_mark = DEFAULT_IDLE_PERCENT;
poll_ival = DEFAULT_POLL_INTERVAL;
mjoules_used = 0;
vflag = 0;
/* User must be root to control frequencies. */
if (geteuid() != 0)
errx(1, "must be root to run");
while ((ch = getopt(argc, argv, "a:b:i:m:M:n:p:P:r:v")) != -1)
switch (ch) {
case 'a':
parse_mode(optarg, &mode_ac, ch);
break;
case 'b':
parse_mode(optarg, &mode_battery, ch);
break;
case 'i':
cpu_idle_mark = atoi(optarg);
if (cpu_idle_mark < 0 || cpu_idle_mark > 100) {
warnx("%d is not a valid percent",
cpu_idle_mark);
usage();
}
break;
case 'm':
minfreq = atoi(optarg);
if (minfreq < 0) {
warnx("%d is not a valid CPU frequency",
minfreq);
usage();
}
break;
case 'M':
maxfreq = atoi(optarg);
if (maxfreq < 0) {
warnx("%d is not a valid CPU frequency",
maxfreq);
usage();
}
break;
case 'n':
parse_mode(optarg, &mode_none, ch);
break;
case 'p':
poll_ival = atoi(optarg);
if (poll_ival < 5) {
warnx("poll interval is in units of ms");
usage();
}
break;
case 'P':
pidfile = optarg;
break;
case 'r':
cpu_running_mark = atoi(optarg);
if (cpu_running_mark <= 0 || cpu_running_mark > 100) {
warnx("%d is not a valid percent",
cpu_running_mark);
usage();
}
break;
case 'v':
vflag = 1;
break;
default:
usage();
}
mode = mode_none;
/* Poll interval is in units of ms. */
poll_ival *= 1000;
/* Look up various sysctl MIBs. */
len = 2;
if (sysctlnametomib("kern.cp_times", cp_times_mib, &len))
err(1, "lookup kern.cp_times");
len = 4;
if (sysctlnametomib("dev.cpu.0.freq", freq_mib, &len))
err(EX_UNAVAILABLE, "no cpufreq(4) support -- aborting");
len = 4;
if (sysctlnametomib("dev.cpu.0.freq_levels", levels_mib, &len))
err(1, "lookup freq_levels");
/* Check if we can read the load and supported freqs. */
if (read_usage_times(NULL))
err(1, "read_usage_times");
if (read_freqs(&numfreqs, &freqs, &mwatts, minfreq, maxfreq))
err(1, "error reading supported CPU frequencies");
if (numfreqs == 0)
errx(1, "no CPU frequencies in user-specified range");
/* Run in the background unless in verbose mode. */
if (!vflag) {
pid_t otherpid;
pfh = pidfile_open(pidfile, 0600, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
errx(1, "powerd already running, pid: %d",
otherpid);
}
warn("cannot open pid file");
}
if (daemon(0, 0) != 0) {
warn("cannot enter daemon mode, exiting");
pidfile_remove(pfh);
exit(EXIT_FAILURE);
}
pidfile_write(pfh);
}
/* Decide whether to use ACPI or APM to read the AC line status. */
acline_init();
/*
* Exit cleanly on signals.
*/
signal(SIGINT, handle_sigs);
signal(SIGTERM, handle_sigs);
freq = initfreq = curfreq = get_freq();
i = get_freq_id(curfreq, freqs, numfreqs);
if (freq < 1)
freq = 1;
/*
* If we are in adaptive mode and the current frequency is outside the
* user-defined range, adjust it to be within the user-defined range.
*/
acline_read();
if (acline_status > SRC_UNKNOWN)
errx(1, "invalid AC line status %d", acline_status);
if ((acline_status == SRC_AC &&
(mode_ac == MODE_ADAPTIVE || mode_ac == MODE_HIADAPTIVE)) ||
(acline_status == SRC_BATTERY &&
(mode_battery == MODE_ADAPTIVE || mode_battery == MODE_HIADAPTIVE)) ||
(acline_status == SRC_UNKNOWN &&
(mode_none == MODE_ADAPTIVE || mode_none == MODE_HIADAPTIVE))) {
/* Read the current frequency. */
len = sizeof(curfreq);
if (sysctl(freq_mib, 4, &curfreq, &len, NULL, 0) != 0) {
if (vflag)
warn("error reading current CPU frequency");
}
if (curfreq < freqs[numfreqs - 1]) {
if (vflag) {
printf("CPU frequency is below user-defined "
"minimum; changing frequency to %d "
"MHz\n", freqs[numfreqs - 1]);
}
if (set_freq(freqs[numfreqs - 1]) != 0) {
warn("error setting CPU freq %d",
freqs[numfreqs - 1]);
}
} else if (curfreq > freqs[0]) {
if (vflag) {
printf("CPU frequency is above user-defined "
"maximum; changing frequency to %d "
"MHz\n", freqs[0]);
}
if (set_freq(freqs[0]) != 0) {
warn("error setting CPU freq %d",
freqs[0]);
}
}
}
idle = 0;
/* Main loop. */
for (;;) {
FD_ZERO(&fdset);
if (devd_pipe >= 0) {
FD_SET(devd_pipe, &fdset);
nfds = devd_pipe + 1;
} else {
nfds = 0;
}
if (mode == MODE_HIADAPTIVE || idle < 120)
to = poll_ival;
else if (idle < 360)
to = poll_ival * 2;
else
to = poll_ival * 4;
timeout.tv_sec = to / 1000000;
timeout.tv_usec = to % 1000000;
select(nfds, &fdset, NULL, &fdset, &timeout);
/* If the user requested we quit, print some statistics. */
if (exit_requested) {
if (vflag && mjoules_used != 0)
printf("total joules used: %u.%03u\n",
(u_int)(mjoules_used / 1000),
(int)mjoules_used % 1000);
break;
}
/* Read the current AC status and record the mode. */
acline_read();
switch (acline_status) {
case SRC_AC:
mode = mode_ac;
break;
case SRC_BATTERY:
mode = mode_battery;
break;
case SRC_UNKNOWN:
mode = mode_none;
break;
default:
errx(1, "invalid AC line status %d", acline_status);
}
/* Read the current frequency. */
if (idle % 32 == 0) {
if ((curfreq = get_freq()) == 0)
continue;
i = get_freq_id(curfreq, freqs, numfreqs);
}
idle++;
if (vflag) {
/* Keep a sum of all power actually used. */
if (mwatts[i] != -1)
mjoules_used +=
(mwatts[i] * (poll_ival / 1000)) / 1000;
}
/* Always switch to the lowest frequency in min mode. */
if (mode == MODE_MIN) {
freq = freqs[numfreqs - 1];
if (curfreq != freq) {
if (vflag) {
printf("now operating on %s power; "
"changing frequency to %d MHz\n",
modes[acline_status], freq);
}
idle = 0;
if (set_freq(freq) != 0) {
warn("error setting CPU freq %d",
freq);
continue;
}
}
continue;
}
/* Always switch to the highest frequency in max mode. */
if (mode == MODE_MAX) {
freq = freqs[0];
if (curfreq != freq) {
if (vflag) {
printf("now operating on %s power; "
"changing frequency to %d MHz\n",
modes[acline_status], freq);
}
idle = 0;
if (set_freq(freq) != 0) {
warn("error setting CPU freq %d",
freq);
continue;
}
}
continue;
}
/* Adaptive mode; get the current CPU usage times. */
if (read_usage_times(&load)) {
if (vflag)
warn("read_usage_times() failed");
continue;
}
if (mode == MODE_ADAPTIVE) {
if (load > cpu_running_mark) {
if (load > 95 || load > cpu_running_mark * 2)
freq *= 2;
else
freq = freq * load / cpu_running_mark;
if (freq > freqs[0])
freq = freqs[0];
} else if (load < cpu_idle_mark &&
curfreq * load < freqs[get_freq_id(
freq * 7 / 8, freqs, numfreqs)] *
cpu_running_mark) {
freq = freq * 7 / 8;
if (freq < freqs[numfreqs - 1])
freq = freqs[numfreqs - 1];
}
} else { /* MODE_HIADAPTIVE */
if (load > cpu_running_mark / 2) {
if (load > 95 || load > cpu_running_mark)
freq *= 4;
else
freq = freq * load * 2 / cpu_running_mark;
if (freq > freqs[0] * 2)
freq = freqs[0] * 2;
} else if (load < cpu_idle_mark / 2 &&
curfreq * load < freqs[get_freq_id(
freq * 31 / 32, freqs, numfreqs)] *
cpu_running_mark / 2) {
freq = freq * 31 / 32;
if (freq < freqs[numfreqs - 1])
freq = freqs[numfreqs - 1];
}
}
if (vflag) {
printf("load %3d%%, current freq %4d MHz (%2d), wanted freq %4d MHz\n",
load, curfreq, i, freq);
}
j = get_freq_id(freq, freqs, numfreqs);
if (i != j) {
if (vflag) {
printf("changing clock"
" speed from %d MHz to %d MHz\n",
freqs[i], freqs[j]);
}
idle = 0;
if (set_freq(freqs[j]))
warn("error setting CPU frequency %d",
freqs[j]);
}
}
if (set_freq(initfreq))
warn("error setting CPU frequency %d", initfreq);
free(freqs);
free(mwatts);
devd_close();
if (!vflag)
pidfile_remove(pfh);
exit(0);
}
/*
* Daemonize and persist pid
*/
int
daemon_start()
{
struct sigaction sig_action;
sigset_t sig_set;
pid_t otherpid;
int curPID;
pthread_t tcp4_thread, udp4_thread;
pthread_t tcp6_thread, udp6_thread;
/* Check if we can acquire the pid file */
pfh = pidfile_open(NULL, 0644, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
errx(EXIT_FAILURE, "Daemon already running, pid: %jd.", (intmax_t)otherpid);
}
err(EXIT_FAILURE, "Cannot open or create pidfile");
}
init_logger();
/* Initialize TCP46 and UDP46 sockets */
if (init_tcp() == EXIT_FAILURE)
return (EXIT_FAILURE);
if (init_udp() == EXIT_FAILURE)
return (EXIT_FAILURE);
/* start daemonizing */
curPID = fork();
switch (curPID) {
case 0: /* This process is the child */
break;
case -1: /* fork() failed, should exit */
perror("fork");
return (EXIT_FAILURE);
default: /* fork() successful, should exit
* (parent) */
return (EXIT_SUCCESS);
}
/* we are the child, complete the daemonization */
/* Close standard IO */
fclose(stdin);
fclose(stdout);
fclose(stderr);
/* Block unnecessary signals */
sigemptyset(&sig_set);
sigaddset(&sig_set, SIGCHLD); /* ignore child - i.e. we don't need
* to wait for it */
sigaddset(&sig_set, SIGTSTP); /* ignore tty stop signals */
sigaddset(&sig_set, SIGTTOU); /* ignore tty background writes */
sigaddset(&sig_set, SIGTTIN); /* ignore tty background reads */
sigprocmask(SIG_BLOCK, &sig_set, NULL); /* Block the above specified
* signals */
/* Catch necessary signals */
sig_action.sa_handler = signal_handler;
sigemptyset(&sig_action.sa_mask);
sig_action.sa_flags = 0;
sigaction(SIGTERM, &sig_action, NULL);
sigaction(SIGHUP, &sig_action, NULL);
sigaction(SIGINT, &sig_action, NULL);
/* create new session and process group */
setsid();
/* persist pid */
pidfile_write(pfh);
/* Create TCP and UDP listener threads */
pthread_create(&tcp4_thread, NULL, tcp4_handler, NULL);
pthread_create(&udp4_thread, NULL, udp4_handler, NULL);
#ifdef PF_INET6
pthread_create(&tcp6_thread, NULL, tcp6_handler, NULL);
pthread_create(&udp6_thread, NULL, udp6_handler, NULL);
#endif
/*
* Wait for threads to terminate, which normally shouldn't ever
* happen
*/
pthread_join(tcp4_thread, NULL);
pthread_join(udp4_thread, NULL);
#ifdef PF_INET6
pthread_join(tcp6_thread, NULL);
pthread_join(udp6_thread, NULL);
#endif
return (EXIT_SUCCESS);
}
/*
* Periodically pat the watchdog, preventing it from firing.
*/
int
main(int argc, char *argv[])
{
struct rtprio rtp;
struct pidfh *pfh;
pid_t otherpid;
if (getuid() != 0)
errx(EX_SOFTWARE, "not super user");
parseargs(argc, argv);
if (do_syslog)
openlog("watchdogd", LOG_CONS|LOG_NDELAY|LOG_PERROR,
LOG_DAEMON);
rtp.type = RTP_PRIO_REALTIME;
rtp.prio = 0;
if (rtprio(RTP_SET, 0, &rtp) == -1)
err(EX_OSERR, "rtprio");
if (!is_dry_run && watchdog_init() == -1)
errx(EX_SOFTWARE, "unable to initialize watchdog");
if (is_daemon) {
if (watchdog_onoff(1) == -1)
err(EX_OSERR, "patting the dog");
pfh = pidfile_open(pidfile, 0600, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
watchdog_onoff(0);
errx(EX_SOFTWARE, "%s already running, pid: %d",
getprogname(), otherpid);
}
warn("Cannot open or create pidfile");
}
if (debugging == 0 && daemon(0, 0) == -1) {
watchdog_onoff(0);
pidfile_remove(pfh);
err(EX_OSERR, "daemon");
}
signal(SIGHUP, SIG_IGN);
signal(SIGINT, sighandler);
signal(SIGTERM, sighandler);
pidfile_write(pfh);
if (madvise(0, 0, MADV_PROTECT) != 0)
warn("madvise failed");
if (mlockall(MCL_CURRENT | MCL_FUTURE) != 0)
warn("mlockall failed");
watchdog_loop();
/* exiting */
pidfile_remove(pfh);
return (EX_OK);
} else {
if (passive)
timeout |= WD_PASSIVE;
else
timeout |= WD_ACTIVE;
if (watchdog_patpat(timeout) < 0)
err(EX_OSERR, "patting the dog");
return (EX_OK);
}
}
