コード例 #1
0
/*!
 *  pixDisplayWriteFormat()
 *
 *      Input:  pix (1, 2, 4, 8, 16, 32 bpp)
 *              reduction (-1 to reset/erase; 0 to disable;
 *                         otherwise this is a reduction factor)
 *              format (IFF_PNG or IFF_JFIF_JPEG)
 *      Return: 0 if OK; 1 on error
 *
 *  Notes:
 *      (1) This writes files if reduction > 0.  These can be displayed using
 *            pixDisplayMultiple("/tmp/junk_write_display*");
 *      (2) All previously written files can be erased by calling with
 *          reduction < 0; the value of pixs is ignored.
 *      (3) If reduction > 1 and depth == 1, this does a scale-to-gray
 *          reduction.
 *      (4) This function uses a static internal variable to number
 *          output files written by a single process.  Behavior
 *          with a shared library may be unpredictable.
 *      (5) Output file format is as follows:
 *            format == IFF_JFIF_JPEG:
 *                png if d < 8 or d == 16 or if the output pix
 *                has a colormap.   Otherwise, output is jpg.
 *            format == IFF_PNG:
 *                png (lossless) on all images.
 *      (6) For 16 bpp, the choice of full dynamic range with log scale
 *          is the best for displaying these images.  Alternative outputs are
 *             pix8 = pixMaxDynamicRange(pixt, L_LINEAR_SCALE);
 *             pix8 = pixConvert16To8(pixt, 0);  // low order byte
 *             pix8 = pixConvert16To8(pixt, 1);  // high order byte
 */
l_int32
pixDisplayWriteFormat(PIX     *pixs,
                      l_int32  reduction,
                      l_int32  format)
{
char            buffer[L_BUF_SIZE];
l_float32       scale;
PIX            *pixt, *pix8;
static l_int32  index = 0;  /* caution: not .so or thread safe */

    PROCNAME("pixDisplayWriteFormat");

    if (reduction == 0) return 0;

    if (reduction < 0) {
        index = 0;  /* reset; this will cause erasure at next call to write */
        return 0;
    }

    if (format != IFF_JFIF_JPEG && format != IFF_PNG)
        return ERROR_INT("invalid format", procName, 1);
    if (!pixs)
        return ERROR_INT("pixs not defined", procName, 1);

    if (index == 0) {
        snprintf(buffer, L_BUF_SIZE,
           "rm -f /tmp/junk_write_display.*.png /tmp/junk_write_display.*.jpg");
        system(buffer);
    }
    index++;

    if (reduction == 1)
        pixt = pixClone(pixs);
    else {
        scale = 1. / (l_float32)reduction;
        if (pixGetDepth(pixs) == 1)
            pixt = pixScaleToGray(pixs, scale);
        else
            pixt = pixScale(pixs, scale, scale);
    }

    if (pixGetDepth(pixt) == 16) {
        pix8 = pixMaxDynamicRange(pixt, L_LOG_SCALE);
        snprintf(buffer, L_BUF_SIZE, "/tmp/junk_write_display.%03d.png", index);
        pixWrite(buffer, pix8, IFF_PNG);
        pixDestroy(&pix8);
    }
    else if (pixGetDepth(pixt) < 8 || pixGetColormap(pixt) ||
             format == IFF_PNG) {
        snprintf(buffer, L_BUF_SIZE, "/tmp/junk_write_display.%03d.png", index);
        pixWrite(buffer, pixt, IFF_PNG);
    }
    else {
        snprintf(buffer, L_BUF_SIZE, "/tmp/junk_write_display.%03d.jpg", index);
        pixWrite(buffer, pixt, format);
    }
    pixDestroy(&pixt);

    return 0;
}
コード例 #2
0
ファイル: scaletest1.c プロジェクト: Strongc/Tesseract_Ocr
main(int    argc,
     char **argv)
{
    char        *filein, *fileout;
    l_int32      d;
    l_float32    scalex, scaley;
    PIX         *pixs, *pixd;
    static char  mainName[] = "scaletest1";

    if (argc != 5)
        return ERROR_INT(" Syntax:  scaletest1 filein scalex scaley fileout",
                         mainName, 1);

    filein = argv[1];
    scalex = atof(argv[2]);
    scaley = atof(argv[3]);
    fileout = argv[4];

    if ((pixs = pixRead(filein)) == NULL)
        return ERROR_INT("pixs not made", mainName, 1);

    /* choose type of scaling operation */
#if 1
    pixd = pixScale(pixs, scalex, scaley);
#elif 0
    pixd = pixScaleLI(pixs, scalex, scaley);
#elif 0
    pixd = pixScaleSmooth(pixs, scalex, scaley);
#elif 0
    pixd = pixScaleAreaMap(pixs, scalex, scaley);
#elif 0
    pixd = pixScaleBySampling(pixs, scalex, scaley);
#else
    pixd = pixScaleToGray(pixs, scalex);
#endif

    d = pixGetDepth(pixd);

#if 1
    if (d <= 8)
        pixWrite(fileout, pixd, IFF_PNG);
    else
        pixWrite(fileout, pixd, IFF_JFIF_JPEG);
#else
    pixWrite(fileout, pixd, IFF_PNG);
#endif

    pixDestroy(&pixs);
    pixDestroy(&pixd);
    return 0;
}
コード例 #3
0
/*!
 *  pixSaveTiledOutline()
 *
 *      Input:  pixs (1, 2, 4, 8, 32 bpp)
 *              pixa (the pix are accumulated here)
 *              scalefactor (0.0 to disable; otherwise this is a scale factor)
 *              newrow (0 if placed on the same row as previous; 1 otherwise)
 *              space (horizontal and vertical spacing, in pixels)
 *              linewidth (width of added outline for image; 0 for no outline)
 *              dp (depth of pixa; 8 or 32 bpp; only used on first call)
 *      Return: 0 if OK, 1 on error.
 *
 *  Notes:
 *      (1) Before calling this function for the first time, use
 *          pixaCreate() to make the @pixa that will accumulate the pix.
 *          This is passed in each time pixSaveTiled() is called.
 *      (2) @scalefactor scales the input image.  After scaling and
 *          possible depth conversion, the image is saved in the input
 *          pixa, along with a box that specifies the location to
 *          place it when tiled later.  Disable saving the pix by
 *          setting @scalefactor == 0.0.
 *      (3) @newrow and @space specify the location of the new pix
 *          with respect to the last one(s) that were entered.
 *      (4) @dp specifies the depth at which all pix are saved.  It can
 *          be only 8 or 32 bpp.  Any colormap is removed.  This is only
 *          used at the first invocation.
 *      (5) This function uses two variables from call to call.
 *          If they were static, the function would not be .so or thread
 *          safe, and furthermore, there would be interference with two or
 *          more pixa accumulating images at a time.  Consequently,
 *          we use the first pix in the pixa to store and obtain both
 *          the depth and the current position of the bottom (one pixel
 *          below the lowest image raster line when laid out using
 *          the boxa).  The bottom variable is stored in the input format
 *          field, which is the only field available for storing an int.
 */
l_int32
pixSaveTiledOutline(PIX       *pixs,
                    PIXA      *pixa,
                    l_float32  scalefactor,
                    l_int32    newrow,
                    l_int32    space,
                    l_int32    linewidth,
                    l_int32    dp)
{
l_int32  n, top, left, bx, by, bw, w, h, depth, bottom;
BOX     *box;
PIX     *pix1, *pix2, *pix3, *pix4;

    PROCNAME("pixSaveTiledOutline");

    if (scalefactor == 0.0) return 0;

    if (!pixs)
        return ERROR_INT("pixs not defined", procName, 1);
    if (!pixa)
        return ERROR_INT("pixa not defined", procName, 1);

    n = pixaGetCount(pixa);
    if (n == 0) {
        bottom = 0;
        if (dp != 8 && dp != 32) {
            L_WARNING("dp not 8 or 32 bpp; using 32\n", procName);
            depth = 32;
        } else {
            depth = dp;
        }
    } else {  /* extract the depth and bottom params from the first pix */
        pix1 = pixaGetPix(pixa, 0, L_CLONE);
        depth = pixGetDepth(pix1);
        bottom = pixGetInputFormat(pix1);  /* not typical usage! */
        pixDestroy(&pix1);
    }

        /* Remove colormap if it exists; otherwise a copy.  This
         * guarantees that pix4 is not a clone of pixs. */
    pix1 = pixRemoveColormapGeneral(pixs, REMOVE_CMAP_BASED_ON_SRC, L_COPY);

        /* Scale and convert to output depth */
    if (scalefactor == 1.0) {
        pix2 = pixClone(pix1);
    } else if (scalefactor > 1.0) {
        pix2 = pixScale(pix1, scalefactor, scalefactor);
    } else if (scalefactor < 1.0) {
        if (pixGetDepth(pix1) == 1)
            pix2 = pixScaleToGray(pix1, scalefactor);
        else
            pix2 = pixScale(pix1, scalefactor, scalefactor);
    }
    pixDestroy(&pix1);
    if (depth == 8)
        pix3 = pixConvertTo8(pix2, 0);
    else
        pix3 = pixConvertTo32(pix2);
    pixDestroy(&pix2);

        /* Add black outline */
    if (linewidth > 0)
        pix4 = pixAddBorder(pix3, linewidth, 0);
    else
        pix4 = pixClone(pix3);
    pixDestroy(&pix3);

        /* Find position of current pix (UL corner plus size) */
    if (n == 0) {
        top = 0;
        left = 0;
    } else if (newrow == 1) {
        top = bottom + space;
        left = 0;
    } else if (n > 0) {
        pixaGetBoxGeometry(pixa, n - 1, &bx, &by, &bw, NULL);
        top = by;
        left = bx + bw + space;
    }

    pixGetDimensions(pix4, &w, &h, NULL);
    bottom = L_MAX(bottom, top + h);
    box = boxCreate(left, top, w, h);
    pixaAddPix(pixa, pix4, L_INSERT);
    pixaAddBox(pixa, box, L_INSERT);

        /* Save the new bottom value */
    pix1 = pixaGetPix(pixa, 0, L_CLONE);
    pixSetInputFormat(pix1, bottom);  /* not typical usage! */
    pixDestroy(&pix1);
    return 0;
}
コード例 #4
0
/*!
 * \brief   pixDisplayWriteFormat()
 *
 * \param[in]    pix 1, 2, 4, 8, 16, 32 bpp
 * \param[in]    reduction -1 to erase and reset; 0 to disable;
 *                         otherwise this is a reduction factor
 * \param[in]    format IFF_DEFAULT or IFF_PNG
 * \return  0 if OK; 1 on error
 *
 * <pre>
 * Notes:
 *      (1) This writes files with pathnames "/tmp/lept/display/file.*"
 *          if reduction \> 0.  These can be collected into a pdf using
 *          pixDisplayMultiple();
 *      (2) Before writing a set of files, call
 *              pixDisplayWrite(NULL, -1);
 *          This erases any previously written files in that directory.
 *      (3) If reduction \> 1 and depth == 1, this does a scale-to-gray
 *          reduction.
 *      (4) This function uses a static internal variable to number
 *          output files written by a single process.  Behavior
 *          with a shared library may be unpredictable.
 *      (5) Output file format is as follows:
 *            format == IFF_DEFAULT:
 *                png if d \< 8 or d == 16 or if the output pix
 *                has a colormap.   Otherwise, output is jpg.
 *            format == IFF_PNG:
 *                png (lossless) on all images.
 *      (6) For 16 bpp, the choice of full dynamic range with log scale
 *          is the best for displaying these images.  Alternative outputs are
 *             pix8 = pixMaxDynamicRange(pixt, L_LINEAR_SCALE);
 *             pix8 = pixConvert16To8(pixt, 0);  // low order byte
 *             pix8 = pixConvert16To8(pixt, 1);  // high order byte
 * </pre>
 */
l_int32
pixDisplayWriteFormat(PIX     *pixs,
                      l_int32  reduction,
                      l_int32  format)
{
char            buf[L_BUF_SIZE];
char           *fname;
l_float32       scale;
PIX            *pix1, *pix2;
static l_int32  index = 0;  /* caution: not .so or thread safe */

    PROCNAME("pixDisplayWriteFormat");

    if (reduction == 0) return 0;

    if (reduction < 0) {  /* initialize */
        lept_rmdir("lept/display");
        index = 0;
        return 0;
    }

    if (!pixs)
        return ERROR_INT("pixs not defined", procName, 1);
    if (format != IFF_DEFAULT && format != IFF_PNG) {
        L_INFO("invalid format; using default\n", procName);
        format = IFF_DEFAULT;
    }

    if (index == 0)
        lept_mkdir("lept/display");
    index++;

    if (reduction == 1) {
        pix1 = pixClone(pixs);
    } else {
        scale = 1. / (l_float32)reduction;
        if (pixGetDepth(pixs) == 1)
            pix1 = pixScaleToGray(pixs, scale);
        else
            pix1 = pixScale(pixs, scale, scale);
    }

    if (pixGetDepth(pix1) == 16) {
        pix2 = pixMaxDynamicRange(pix1, L_LOG_SCALE);
        snprintf(buf, L_BUF_SIZE, "file.%03d.png", index);
        fname = genPathname("/tmp/lept/display", buf);
        pixWrite(fname, pix2, IFF_PNG);
        pixDestroy(&pix2);
    } else if (pixGetDepth(pix1) < 8 || pixGetColormap(pix1) ||
               format == IFF_PNG) {
        snprintf(buf, L_BUF_SIZE, "file.%03d.png", index);
        fname = genPathname("/tmp/lept/display", buf);
        pixWrite(fname, pix1, IFF_PNG);
    } else {
        snprintf(buf, L_BUF_SIZE, "file.%03d.jpg", index);
        fname = genPathname("/tmp/lept/display", buf);
        pixWrite(fname, pix1, format);
    }
    LEPT_FREE(fname);
    pixDestroy(&pix1);

    return 0;
}
コード例 #5
0
ファイル: writefile.c プロジェクト: 0xkasun/Dummy_Tes
/*!
 *  pixSaveTiledOutline()
 *
 *      Input:  pixs (1, 2, 4, 8, 32 bpp)
 *              pixa (the pix are accumulated here)
 *              reduction (0 to disable; otherwise this is a reduction factor)
 *              newrow (0 if placed on the same row as previous; 1 otherwise)
 *              space (horizontal and vertical spacing, in pixels)
 *              linewidth (width of added outline for image; 0 for no outline)
 *              dp (depth of pixa; 8 or 32 bpp; only used on first call)
 *      Return: 0 if OK, 1 on error.
 *
 *  Notes:
 *      (1) Before calling this function for the first time, use
 *          pixaCreate() to make the @pixa that will accumulate the pix.
 *          This is passed in each time pixSaveTiled() is called.
 *      (2) @reduction is the integer reduction factor for the input
 *          image.  After reduction and possible depth conversion,
 *          the image is saved in the input pixa, along with a box
 *          that specifies the location to place it when tiled later.
 *          Disable saving the pix by setting reduction == 0.
 *      (3) @newrow and @space specify the location of the new pix
 *          with respect to the last one(s) that were entered.
 *      (4) @dp specifies the depth at which all pix are saved.  It can
 *          be only 8 or 32 bpp.  Any colormap is removed.  This is only
 *          used at the first invocation.
 *      (5) This function uses two variables from call to call.
 *          If they were static, the function would not be .so or thread
 *          safe, and furthermore, there would be interference with two or
 *          more pixa accumulating images at a time.  Consequently,
 *          we use the first pix in the pixa to store and obtain both
 *          the depth and the current position of the bottom (one pixel
 *          below the lowest image raster line when laid out using
 *          the boxa).  The bottom variable is stored in the input format
 *          field, which is the only field available for storing an int.
 */
l_int32
pixSaveTiledOutline(PIX     *pixs,
                    PIXA    *pixa,
                    l_int32  reduction,
                    l_int32  newrow,
                    l_int32  space,
                    l_int32  linewidth,
                    l_int32  dp)
{
l_int32         n, top, left, bx, by, bw, w, h, depth, bottom;
l_float32       scale;
BOX            *box;
PIX            *pix, *pixt1, *pixt2, *pixt3;

    PROCNAME("pixSaveTiledOutline");

    if (reduction == 0) return 0;

    if (!pixs)
        return ERROR_INT("pixs not defined", procName, 1);
    if (!pixa)
        return ERROR_INT("pixa not defined", procName, 1);

    n = pixaGetCount(pixa);
    if (n == 0) {
        bottom = 0;
        if (dp != 8 && dp != 32) {
            L_WARNING("dp not 8 or 32 bpp; using 32", procName);
            depth = 32;
        } else
            depth = dp;
    }
    else {  /* extract the depth and bottom params from the first pix */
        pix = pixaGetPix(pixa, 0, L_CLONE);
        depth = pixGetDepth(pix);
        bottom = pixGetInputFormat(pix);  /* not typical usage! */
        pixDestroy(&pix);
    }

        /* Scale and convert to output depth */
    if (reduction == 1)
        pixt1 = pixClone(pixs);
    else {
        scale = 1. / (l_float32)reduction;
        if (pixGetDepth(pixs) == 1)
            pixt1 = pixScaleToGray(pixs, scale);
        else
            pixt1 = pixScale(pixs, scale, scale);
    }
    if (depth == 8)
        pixt2 = pixConvertTo8(pixt1, 0);
    else
        pixt2 = pixConvertTo32(pixt1);
    pixDestroy(&pixt1);

        /* Add black outline */
    if (linewidth > 0)
        pixt3 = pixAddBorder(pixt2, linewidth, 0);
    else
        pixt3 = pixClone(pixt2);
    pixDestroy(&pixt2);

        /* Find position of current pix (UL corner plus size) */
    if (n == 0) {
        top = 0;
        left = 0;
    }
    else if (newrow == 1) {
        top = bottom + space;
        left = 0;
    }
    else if (n > 0) {
        pixaGetBoxGeometry(pixa, n - 1, &bx, &by, &bw, NULL);
        top = by;
        left = bx + bw + space;
    }

    pixGetDimensions(pixt3, &w, &h, NULL);
    bottom = L_MAX(bottom, top + h);
    box = boxCreate(left, top, w, h);
    pixaAddPix(pixa, pixt3, L_INSERT);
    pixaAddBox(pixa, box, L_INSERT);

        /* Save the new bottom value */
    pix = pixaGetPix(pixa, 0, L_CLONE);
    pixSetInputFormat(pix, bottom);  /* not typical usage! */
    pixDestroy(&pix);

    return 0;
}
コード例 #6
0
ファイル: pixafunc2.c プロジェクト: 0359xiaodong/tess-two
/*!
 *  pixaDisplayTiledAndScaled()
 *
 *      Input:  pixa
 *              outdepth (output depth: 1, 8 or 32 bpp)
 *              tilewidth (each pix is scaled to this width)
 *              ncols (number of tiles in each row)
 *              background (0 for white, 1 for black; this is the color
 *                 of the spacing between the images)
 *              spacing  (between images, and on outside)
 *              border (width of additional black border on each image;
 *                      use 0 for no border)
 *      Return: pix of tiled images, or null on error
 *
 *  Notes:
 *      (1) This can be used to tile a number of renderings of
 *          an image that are at different scales and depths.
 *      (2) Each image, after scaling and optionally adding the
 *          black border, has width 'tilewidth'.  Thus, the border does
 *          not affect the spacing between the image tiles.  The
 *          maximum allowed border width is tilewidth / 5.
 */
PIX *
pixaDisplayTiledAndScaled(PIXA    *pixa,
                          l_int32  outdepth,
                          l_int32  tilewidth,
                          l_int32  ncols,
                          l_int32  background,
                          l_int32  spacing,
                          l_int32  border)
{
l_int32    x, y, w, h, wd, hd, d;
l_int32    i, n, nrows, maxht, ninrow, irow, bordval;
l_int32   *rowht;
l_float32  scalefact;
PIX       *pix, *pixn, *pixt, *pixb, *pixd;
PIXA      *pixan;

    PROCNAME("pixaDisplayTiledAndScaled");

    if (!pixa)
        return (PIX *)ERROR_PTR("pixa not defined", procName, NULL);
    if (outdepth != 1 && outdepth != 8 && outdepth != 32)
        return (PIX *)ERROR_PTR("outdepth not in {1, 8, 32}", procName, NULL);
    if (border < 0 || border > tilewidth / 5)
        border = 0;
    
    if ((n = pixaGetCount(pixa)) == 0)
        return (PIX *)ERROR_PTR("no components", procName, NULL);

        /* Normalize scale and depth for each pix; optionally add border */
    pixan = pixaCreate(n);
    bordval = (outdepth == 1) ? 1 : 0;
    for (i = 0; i < n; i++) {
        if ((pix = pixaGetPix(pixa, i, L_CLONE)) == NULL)
            continue;

        pixGetDimensions(pix, &w, &h, &d);
        scalefact = (l_float32)(tilewidth - 2 * border) / (l_float32)w;
        if (d == 1 && outdepth > 1 && scalefact < 1.0)
            pixt = pixScaleToGray(pix, scalefact);
        else
            pixt = pixScale(pix, scalefact, scalefact);

        if (outdepth == 1)
            pixn = pixConvertTo1(pixt, 128);
        else if (outdepth == 8)
            pixn = pixConvertTo8(pixt, FALSE);
        else  /* outdepth == 32 */
            pixn = pixConvertTo32(pixt);
        pixDestroy(&pixt);

        if (border)
            pixb = pixAddBorder(pixn, border, bordval);
        else
            pixb = pixClone(pixn);

        pixaAddPix(pixan, pixb, L_INSERT);
        pixDestroy(&pix);
        pixDestroy(&pixn);
    }
    if ((n = pixaGetCount(pixan)) == 0) { /* should not have changed! */
        pixaDestroy(&pixan);
        return (PIX *)ERROR_PTR("no components", procName, NULL);
    }

        /* Determine the size of each row and of pixd */
    wd = tilewidth * ncols + spacing * (ncols + 1);
    nrows = (n + ncols - 1) / ncols;
    if ((rowht = (l_int32 *)CALLOC(nrows, sizeof(l_int32))) == NULL)
        return (PIX *)ERROR_PTR("rowht array not made", procName, NULL);
    maxht = 0;
    ninrow = 0;
    irow = 0;
    for (i = 0; i < n; i++) {
        pix = pixaGetPix(pixan, i, L_CLONE);
        ninrow++;
        pixGetDimensions(pix, &w, &h, NULL);
        maxht = L_MAX(h, maxht);
        if (ninrow == ncols) {
            rowht[irow] = maxht;
            maxht = ninrow = 0;  /* reset */
            irow++;
        }
        pixDestroy(&pix);
    }
    if (ninrow > 0) {   /* last fencepost */
        rowht[irow] = maxht;
        irow++;  /* total number of rows */
    }
    nrows = irow;
    hd = spacing * (nrows + 1);
    for (i = 0; i < nrows; i++)
        hd += rowht[i];

    pixd = pixCreate(wd, hd, outdepth);
    if ((background == 1 && outdepth == 1) ||
        (background == 0 && outdepth != 1))
        pixSetAll(pixd);

        /* Now blit images to pixd */
    x = y = spacing;
    irow = 0;
    for (i = 0; i < n; i++) {
        pix = pixaGetPix(pixan, i, L_CLONE);
        pixGetDimensions(pix, &w, &h, NULL);
        if (i && ((i % ncols) == 0)) {  /* start new row */
            x = spacing;
            y += spacing + rowht[irow];
            irow++;
        }
        pixRasterop(pixd, x, y, w, h, PIX_SRC, pix, 0, 0);
        x += tilewidth + spacing;
        pixDestroy(&pix);
    }

    pixaDestroy(&pixan);
    FREE(rowht);
    return pixd;
}
コード例 #7
0
ファイル: affine_reg.c プロジェクト: MaTriXy/tess-two
int main(int    argc,
         char **argv)
{
char          bufname[256];
l_int32       i, w, h;
l_float32    *mat1, *mat2, *mat3, *mat1i, *mat2i, *mat3i, *matdinv;
l_float32     matd[9], matdi[9];
BOXA         *boxa, *boxa2;
PIX          *pix, *pixs, *pixb, *pixg, *pixc, *pixcs;
PIX          *pixd, *pix1, *pix2, *pix3;
PIXA         *pixa;
PTA          *ptas, *ptad;
L_REGPARAMS  *rp;

    if (regTestSetup(argc, argv, &rp))
        return 1;

    pix = pixRead("feyn.tif");
    pixs = pixScale(pix, 0.22, 0.22);
    pixDestroy(&pix);

#if ALL
        /* Test invertability of sequential. */
    fprintf(stderr, "Test invertability of sequential\n");
    pixa = pixaCreate(0);
    for (i = 0; i < 3; i++) {
        pixb = pixAddBorder(pixs, ADDED_BORDER_PIXELS, 0);
        MakePtas(i, &ptas, &ptad);
        pix1 = pixAffineSequential(pixb, ptad, ptas, 0, 0);
        regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 0,3,6 */
        pixaAddPix(pixa, pix1, L_INSERT);
        pix2 = pixAffineSequential(pix1, ptas, ptad, 0, 0);
        regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 1,4,7 */
        pixaAddPix(pixa, pix2, L_INSERT);
        pixd = pixRemoveBorder(pix2, ADDED_BORDER_PIXELS);
        pixXor(pixd, pixd, pixs);
        regTestWritePixAndCheck(rp, pixd, IFF_PNG);  /* 2,5,8 */
        pixaAddPix(pixa, pixd, L_INSERT);
        pixDestroy(&pixb);
        ptaDestroy(&ptas);
        ptaDestroy(&ptad);
    }

    pix1 = pixaDisplayTiledInColumns(pixa, 3, 1.0, 20, 3);
    pix2 = pixScaleToGray(pix1, 0.2);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 9 */
    pixDisplayWithTitle(pix2, 0, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixaDestroy(&pixa);
#endif

#if ALL
        /* Test invertability of sampling */
    fprintf(stderr, "Test invertability of sampling\n");
    pixa = pixaCreate(0);
    for (i = 0; i < 3; i++) {
        pixb = pixAddBorder(pixs, ADDED_BORDER_PIXELS, 0);
        MakePtas(i, &ptas, &ptad);
        pix1 = pixAffineSampledPta(pixb, ptad, ptas, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 10,13,16 */
        pixaAddPix(pixa, pix1, L_INSERT);
        pix2 = pixAffineSampledPta(pix1, ptas, ptad, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 11,14,17 */
        pixaAddPix(pixa, pix2, L_INSERT);
        pixd = pixRemoveBorder(pix2, ADDED_BORDER_PIXELS);
        pixXor(pixd, pixd, pixs);
        regTestWritePixAndCheck(rp, pixd, IFF_PNG);  /* 12,15,18 */
        pixaAddPix(pixa, pixd, L_INSERT);
        pixDestroy(&pixb);
        ptaDestroy(&ptas);
        ptaDestroy(&ptad);
    }

    pix1 = pixaDisplayTiledInColumns(pixa, 3, 1.0, 20, 3);
    pix2 = pixScaleToGray(pix1, 0.2);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 19 */
    pixDisplayWithTitle(pix2, 200, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pixs);
    pixaDestroy(&pixa);
#endif

#if ALL
        /* Test invertability of interpolation on grayscale */
    fprintf(stderr, "Test invertability of grayscale interpolation\n");
    pix = pixRead("feyn.tif");
    pixg = pixScaleToGray3(pix);
    pixDestroy(&pix);
    pixa = pixaCreate(0);
    for (i = 0; i < 3; i++) {
        pixb = pixAddBorder(pixg, ADDED_BORDER_PIXELS / 3, 255);
        MakePtas(i, &ptas, &ptad);
        pix1 = pixAffinePta(pixb, ptad, ptas, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix1, IFF_JFIF_JPEG);  /* 20,23,26 */
        pixaAddPix(pixa, pix1, L_INSERT);
        pix2 = pixAffinePta(pix1, ptas, ptad, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix2, IFF_JFIF_JPEG);  /* 21,24,27 */
        pixaAddPix(pixa, pix2, L_INSERT);
        pixd = pixRemoveBorder(pix2, ADDED_BORDER_PIXELS / 3);
        pixXor(pixd, pixd, pixg);
        pixInvert(pixd, pixd);
        regTestWritePixAndCheck(rp, pixd, IFF_JFIF_JPEG);  /* 22,25,28 */
        pixaAddPix(pixa, pixd, L_INSERT);
        pixDestroy(&pixb);
        ptaDestroy(&ptas);
        ptaDestroy(&ptad);
    }

    pix1 = pixaDisplayTiledInColumns(pixa, 3, 1.0, 20, 3);
    pix2 = pixScale(pix1, 0.2, 0.2);
    regTestWritePixAndCheck(rp, pix2, IFF_JFIF_JPEG);  /* 29 */
    pixDisplayWithTitle(pix2, 400, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pixg);
    pixaDestroy(&pixa);
#endif

#if ALL
        /* Test invertability of interpolation on color */
    fprintf(stderr, "Test invertability of color interpolation\n");
    pixa = pixaCreate(0);
    pixc = pixRead("test24.jpg");
    pixcs = pixScale(pixc, 0.3, 0.3);
    for (i = 0; i < 3; i++) {
        pixb = pixAddBorder(pixcs, ADDED_BORDER_PIXELS / 4, 0xffffff00);
        MakePtas(i, &ptas, &ptad);
        pix1 = pixAffinePta(pixb, ptad, ptas, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix1, IFF_JFIF_JPEG);  /* 30,33,36 */
        pixaAddPix(pixa, pix1, L_INSERT);
        pix2 = pixAffinePta(pix1, ptas, ptad, L_BRING_IN_WHITE);
        regTestWritePixAndCheck(rp, pix2, IFF_JFIF_JPEG);  /* 31,34,37 */
        pixaAddPix(pixa, pix2, L_INSERT);
        pixd = pixRemoveBorder(pix2, ADDED_BORDER_PIXELS / 4);
        pixXor(pixd, pixd, pixcs);
        pixInvert(pixd, pixd);
        regTestWritePixAndCheck(rp, pixd, IFF_JFIF_JPEG);  /* 32,35,38 */
        pixaAddPix(pixa, pixd, L_INSERT);
        pixDestroy(&pixb);
        ptaDestroy(&ptas);
        ptaDestroy(&ptad);
    }

    pix1 = pixaDisplayTiledInColumns(pixa, 3, 1.0, 20, 3);
    pix2 = pixScale(pix1, 0.25, 0.25);
    regTestWritePixAndCheck(rp, pix2, IFF_JFIF_JPEG);  /* 39 */
    pixDisplayWithTitle(pix2, 600, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pixc);
    pixaDestroy(&pixa);
#endif

#if ALL
       /* Comparison between sequential and sampling */
    fprintf(stderr, "Compare sequential with sampling\n");
    pix = pixRead("feyn.tif");
    pixs = pixScale(pix, 0.22, 0.22);
    pixDestroy(&pix);

    MakePtas(3, &ptas, &ptad);
    pixa = pixaCreate(0);

        /* Use sequential transforms */
    pix1 = pixAffineSequential(pixs, ptas, ptad,
                     ADDED_BORDER_PIXELS, ADDED_BORDER_PIXELS);
    regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 40 */
    pixaAddPix(pixa, pix1, L_INSERT);

        /* Use sampled transform */
    pix2 = pixAffineSampledPta(pixs, ptas, ptad, L_BRING_IN_WHITE);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 41 */
    pixaAddPix(pixa, pix2, L_COPY);

        /* Compare the results */
    pixXor(pix2, pix2, pix1);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 42 */
    pixaAddPix(pixa, pix2, L_INSERT);

    pix1 = pixaDisplayTiledInColumns(pixa, 3, 1.0, 20, 3);
    pix2 = pixScale(pix1, 0.5, 0.5);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 43 */
    pixDisplayWithTitle(pix2, 800, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pixs);
    pixaDestroy(&pixa);
    ptaDestroy(&ptas);
    ptaDestroy(&ptad);
#endif


#if ALL
       /* Test with large distortion */
    fprintf(stderr, "Test with large distortion\n");
    MakePtas(4, &ptas, &ptad);
    pixa = pixaCreate(0);
    pix = pixRead("feyn.tif");
    pixg = pixScaleToGray6(pix);
    pixDestroy(&pix);

    pix1 = pixAffineSequential(pixg, ptas, ptad, 0, 0);
    regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 44 */
    pixaAddPix(pixa, pix1, L_COPY);

    pix2 = pixAffineSampledPta(pixg, ptas, ptad, L_BRING_IN_WHITE);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 45 */
    pixaAddPix(pixa, pix2, L_COPY);

    pix3 = pixAffinePta(pixg, ptas, ptad, L_BRING_IN_WHITE);
    regTestWritePixAndCheck(rp, pix3, IFF_PNG);  /* 46 */
    pixaAddPix(pixa, pix3, L_INSERT);

    pixXor(pix1, pix1, pix2);
    pixInvert(pix1, pix1);
    regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 47 */
    pixaAddPix(pixa, pix1, L_INSERT);
    pixXor(pix2, pix2, pix3);
    pixInvert(pix2, pix2);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 48 */
    pixaAddPix(pixa, pix2, L_INSERT);

    pix1 = pixaDisplayTiledInColumns(pixa, 5, 1.0, 20, 3);
    pix2 = pixScale(pix1, 0.8, 0.8);
    regTestWritePixAndCheck(rp, pix2, IFF_PNG);  /* 49 */
    pixDisplayWithTitle(pix2, 1000, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pixg);
    pixaDestroy(&pixa);
    ptaDestroy(&ptas);
    ptaDestroy(&ptad);
#endif

#if ALL 
        /* Set up pix and boxa */
    fprintf(stderr, "Test affine transforms and inverses on pix and boxa\n");
    pixa = pixaCreate(0);
    pix = pixRead("lucasta.1.300.tif");
    pixTranslate(pix, pix, 70, 0, L_BRING_IN_WHITE);
    pix1 = pixCloseBrick(NULL, pix, 14, 5);
    pixOpenBrick(pix1, pix1, 1, 2);
    boxa = pixConnComp(pix1, NULL, 8);
    pixs = pixConvertTo32(pix);
    pixGetDimensions(pixs, &w, &h, NULL);
    pixc = pixCopy(NULL, pixs);
    RenderHashedBoxa(pixc, boxa, 113);
    regTestWritePixAndCheck(rp, pixc, IFF_PNG);  /* 50 */
    pixaAddPix(pixa, pixc, L_INSERT);
    pixDestroy(&pix);
    pixDestroy(&pix1);

        /* Set up an affine transform in matd, and apply it to boxa */
    mat1 = createMatrix2dTranslate(SHIFTX, SHIFTY);
    mat2 = createMatrix2dScale(SCALEX, SCALEY);
    mat3 = createMatrix2dRotate(w / 2, h / 2, ROTATION);
    l_productMat3(mat3, mat2, mat1, matd, 3);
    boxa2 = boxaAffineTransform(boxa, matd);

        /* Set up the inverse transform --> matdi */
    mat1i = createMatrix2dTranslate(-SHIFTX, -SHIFTY);
    mat2i = createMatrix2dScale(1.0/ SCALEX, 1.0 / SCALEY);
    mat3i = createMatrix2dRotate(w / 2, h / 2, -ROTATION);
    l_productMat3(mat1i, mat2i, mat3i, matdi, 3);

        /* Invert the original affine transform --> matdinv */
    affineInvertXform(matd, &matdinv);
    if (rp->display) { 
        fprintf(stderr, "  Affine transform, applied to boxa\n");
        for (i = 0; i < 9; i++) {
            if (i && (i % 3 == 0))  fprintf(stderr, "\n");
            fprintf(stderr, "   %7.3f ", matd[i]);
        }
        fprintf(stderr, "\n  Inverse transform, by composing inverse parts");
        for (i = 0; i < 9; i++) {
            if (i % 3 == 0)  fprintf(stderr, "\n");
            fprintf(stderr, "   %7.3f ", matdi[i]);
        }
        fprintf(stderr, "\n  Inverse transform, by inverting affine xform");
        for (i = 0; i < 6; i++) {
            if (i % 3 == 0)  fprintf(stderr, "\n");
            fprintf(stderr, "   %7.3f ", matdinv[i]);
        }
        fprintf(stderr, "\n");
    }

        /* Apply the inverted affine transform --> pixs */
    pixd = pixAffine(pixs, matdinv, L_BRING_IN_WHITE);
    RenderHashedBoxa(pixd, boxa2, 513);
    regTestWritePixAndCheck(rp, pixd, IFF_PNG);  /* 51 */
    pixaAddPix(pixa, pixd, L_INSERT);

    pix1 = pixaDisplayTiledInColumns(pixa, 2, 1.0, 30, 2);
    regTestWritePixAndCheck(rp, pix1, IFF_PNG);  /* 52 */
    pixDisplayWithTitle(pix1, 1200, 100, NULL, rp->display);
    pixDestroy(&pix1);
    pixaDestroy(&pixa);

    pixDestroy(&pixs);
    boxaDestroy(&boxa);
    boxaDestroy(&boxa2);
    lept_free(mat1);
    lept_free(mat2);
    lept_free(mat3);
    lept_free(mat1i);
    lept_free(mat2i);
    lept_free(mat3i);
    lept_free(matdinv);
#endif

    return regTestCleanup(rp);
}
コード例 #8
0
ファイル: pdfseg_reg.c プロジェクト: 0xkasun/Dummy_Tes
main(int    argc,
     char **argv)
{
l_int32      h;
l_float32    scalefactor;
BOX         *box;
BOXA        *boxa1, *boxa2;
BOXAA       *baa;
PIX         *pix1, *pix2, *pix3, *pix4, *pix5, *pix6, *pix7, *pix8, *pix9;
L_REGPARAMS  *rp;

    if (regTestSetup(argc, argv, &rp))
        return 1;

    lept_rmdir("segtest");
    lept_mkdir("segtest");
    baa = boxaaCreate(5);

        /* Image region input.  */
    pix1 = pixRead("wet-day.jpg");
    pix2 = pixScaleToSize(pix1, WIDTH, 0);
    pixWrite("/tmp/segtest/0.jpg", pix2, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/0.jpg");   /* 0 */
    box = boxCreate(105, 161, 620, 872);   /* image region */
    boxa1 = boxaCreate(1);
    boxaAddBox(boxa1, box, L_INSERT);
    boxaaAddBoxa(baa, boxa1, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);

        /* Compute image region at w = 2 * WIDTH */
    pix1 = pixRead("candelabrum-11.jpg");
    pix2 = pixScaleToSize(pix1, WIDTH, 0);
    pix3 = pixConvertTo1(pix2, 100);
    pix4 = pixExpandBinaryPower2(pix3, 2);  /* w = 2 * WIDTH */
    pix5 = pixGenHalftoneMask(pix4, NULL, NULL, 1);
    pix6 = pixMorphSequence(pix5, "c20.1 + c1.20", 0);
    pix7 = pixMaskConnComp(pix6, 8, &boxa1);
    pix8 = pixReduceBinary2(pix7, NULL);  /* back to w = WIDTH */
    pix9 = pixBackgroundNormSimple(pix2, pix8, NULL);
    pixWrite("/tmp/segtest/1.jpg", pix9, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/1.jpg");   /* 1 */
    boxa2 = boxaTransform(boxa1, 0, 0, 0.5, 0.5);  /* back to w = WIDTH */
    boxaaAddBoxa(baa, boxa2, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pix3);
    pixDestroy(&pix4);
    pixDestroy(&pix5);
    pixDestroy(&pix6);
    pixDestroy(&pix7);
    pixDestroy(&pix8);
    pixDestroy(&pix9);
    boxaDestroy(&boxa1);

        /* Use mask to find image region */
    pix1 = pixRead("lion-page.00016.jpg");
    pix2 = pixScaleToSize(pix1, WIDTH, 0);
    pixWrite("/tmp/segtest/2.jpg", pix2, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/2.jpg");   /* 2 */
    pix3 = pixRead("lion-mask.00016.tif");
    pix4 = pixScaleToSize(pix3, WIDTH, 0);
    boxa1 = pixConnComp(pix4, NULL, 8);
    boxaaAddBoxa(baa, boxa1, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pix3);
    pixDestroy(&pix4);

        /* Compute image region at full res */
    pix1 = pixRead("rabi.png");
    scalefactor = (l_float32)WIDTH / (l_float32)pixGetWidth(pix1);
    pix2 = pixScaleToGray(pix1, scalefactor);
    pixWrite("/tmp/segtest/3.jpg", pix2, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/3.jpg");   /* 3 */
    pix3 = pixGenHalftoneMask(pix1, NULL, NULL, 0);
    pix4 = pixMorphSequence(pix3, "c20.1 + c1.20", 0);
    boxa1 = pixConnComp(pix4, NULL, 8);
    boxa2 = boxaTransform(boxa1, 0, 0, scalefactor, scalefactor);
    boxaaAddBoxa(baa, boxa2, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pix3);
    pixDestroy(&pix4);
    boxaDestroy(&boxa1);

        /* Page with no image regions */
    pix1 = pixRead("lucasta-47.jpg");
    pix2 = pixScaleToSize(pix1, WIDTH, 0);
    boxa1 = boxaCreate(1);
    pixWrite("/tmp/segtest/4.jpg", pix2, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/4.jpg");   /* 4 */
    boxaaAddBoxa(baa, boxa1, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);

        /* Page that is all image */
    pix1 = pixRead("map1.jpg");
    pix2 = pixScaleToSize(pix1, WIDTH, 0);
    pixWrite("/tmp/segtest/5.jpg", pix2, IFF_JFIF_JPEG);
    regTestCheckFile(rp, "/tmp/segtest/5.jpg");   /* 5 */
    h = pixGetHeight(pix2);
    box = boxCreate(0, 0, WIDTH, h);
    boxa1 = boxaCreate(1);
    boxaAddBox(boxa1, box, L_INSERT);
    boxaaAddBoxa(baa, boxa1, L_INSERT);
    pixDestroy(&pix1);
    pixDestroy(&pix2);

        /* Save the boxaa file */
    boxaaWrite("/tmp/segtest/seg.baa", baa);
    regTestCheckFile(rp, "/tmp/segtest/seg.baa");   /* 6 */

        /* Do the conversion */
    l_pdfSetDateAndVersion(FALSE);
    convertSegmentedFilesToPdf("/tmp/segtest", ".jpg", 100, L_G4_ENCODE,
                               140, baa, 75, 0.6, "Segmentation Test",
                               "/tmp/pdfseg.7.pdf");
    regTestCheckFile(rp, "/tmp/pdfseg.7.pdf");   /* 7 */

    boxaaDestroy(&baa);
    return regTestCleanup(rp);
}
コード例 #9
0
ファイル: scaletest2.c プロジェクト: ErfanHasmin/scope-ocr
main(int    argc,
     char **argv)
{
PIX         *pixs;
l_int32      d;
static char  mainName[] = "scaletest2";

    if (argc != 2)
	return ERROR_INT(" Syntax:  scaletest2 filein", mainName, 1);

    if ((pixs = pixRead(argv[1])) == NULL)
	return ERROR_INT("pixs not made", mainName, 1);
    d = pixGetDepth(pixs);
	    
#if 1
        /* Integer scale-to-gray functions */
    if (d == 1)
    {
    PIX  *pixd;

        pixd = pixScaleToGray2(pixs);
        pixWrite("/tmp/s2g_2x", pixd, IFF_PNG);
        pixDestroy(&pixd);
        pixd = pixScaleToGray3(pixs);
        pixWrite("/tmp/s2g_3x", pixd, IFF_PNG);
        pixDestroy(&pixd);
        pixd = pixScaleToGray4(pixs);
        pixWrite("/tmp/s2g_4x", pixd, IFF_PNG);
        pixDestroy(&pixd);
        pixd = pixScaleToGray6(pixs);
        pixWrite("/tmp/s2g_6x", pixd, IFF_PNG);
        pixDestroy(&pixd);
        pixd = pixScaleToGray8(pixs);
        pixWrite("/tmp/s2g_8x", pixd, IFF_PNG);
        pixDestroy(&pixd);
        pixd = pixScaleToGray16(pixs);
        pixWrite("/tmp/s2g_16x", pixd, IFF_PNG);
        pixDestroy(&pixd);
    }
#endif

#if 1
        /* Various non-integer scale-to-gray, compared with
	 * with different ways of getting similar results */
    if (d == 1)
    {
    PIX  *pixt, *pixd;

        pixd = pixScaleToGray8(pixs);
        pixWrite("/tmp/s2g_8.png", pixd, IFF_PNG);
        pixDestroy(&pixd);

        pixd = pixScaleToGray(pixs, 0.124);
        pixWrite("/tmp/s2g_124.png", pixd, IFF_PNG);
        pixDestroy(&pixd);

        pixd = pixScaleToGray(pixs, 0.284);
        pixWrite("/tmp/s2g_284.png", pixd, IFF_PNG);
        pixDestroy(&pixd);

        pixt = pixScaleToGray4(pixs);
        pixd = pixScaleBySampling(pixt, 284./250., 284./250.);
        pixWrite("/tmp/s2g_284.2.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixt = pixScaleToGray4(pixs);
        pixd = pixScaleGrayLI(pixt, 284./250., 284./250.);
        pixWrite("/tmp/s2g_284.3.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixt = pixScaleBinary(pixs, 284./250., 284./250.);
        pixd = pixScaleToGray4(pixt);
        pixWrite("/tmp/s2g_284.4.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixt = pixScaleToGray4(pixs);
        pixd = pixScaleGrayLI(pixt, 0.49, 0.49);
        pixWrite("/tmp/s2g_42.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixt = pixScaleToGray4(pixs);
        pixd = pixScaleSmooth(pixt, 0.49, 0.49);
        pixWrite("/tmp/s2g_4sm.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixt = pixScaleBinary(pixs, .16/.125, .16/.125);
        pixd = pixScaleToGray8(pixt);
        pixWrite("/tmp/s2g_16.png", pixd, IFF_PNG);
        pixDestroy(&pixt);
        pixDestroy(&pixd);

        pixd = pixScaleToGray(pixs, .16);
        pixWrite("/tmp/s2g_16.2.png", pixd, IFF_PNG);
        pixDestroy(&pixd);
    }
#endif

#if 1
        /* Antialiased (smoothed) reduction, along with sharpening */
    if (d != 1)
    {
    PIX *pixt1, *pixt2;
        startTimer();
        pixt1 = pixScaleSmooth(pixs, 0.154, 0.154);
        fprintf(stderr, "fast scale: %5.3f sec\n", stopTimer());
        pixDisplayWithTitle(pixt1, 0, 0, "smooth scaling", DISPLAY);
        pixWrite("/tmp/smooth1.png", pixt1, IFF_PNG);
        pixt2 = pixUnsharpMasking(pixt1, 1, 0.3);
        pixWrite("/tmp/smooth2.png", pixt2, IFF_PNG);
        pixDisplayWithTitle(pixt2, 200, 0, "sharp scaling", DISPLAY);
        pixDestroy(&pixt1);
        pixDestroy(&pixt2);
    }
#endif


#if 1
        /* Test a large range of scale-to-gray reductions */
    if (d == 1)
    {
    l_int32    i;
    l_float32  scale;
    PIX       *pixd;
        for (i = 2; i < 15; i++) {
            scale = 1. / (l_float32)i;
            startTimer();
            pixd = pixScaleToGray(pixs, scale);
            fprintf(stderr, "Time for scale %7.3f: %7.3f sec\n",
            scale, stopTimer());
            pixDisplayWithTitle(pixd, 75 * i, 100, "scaletogray", DISPLAY);
            pixDestroy(&pixd);
        }
        for (i = 8; i < 14; i++) {
            scale = 1. / (l_float32)(2 * i);
            startTimer();
            pixd = pixScaleToGray(pixs, scale);
            fprintf(stderr, "Time for scale %7.3f: %7.3f sec\n",
            scale, stopTimer());
            pixDisplayWithTitle(pixd, 100 * i, 600, "scaletogray", DISPLAY);
            pixDestroy(&pixd);
        }
    }
#endif


#if 1
        /* Test the same range of scale-to-gray mipmap reductions */
    if (d == 1)
    {
    l_int32    i;
    l_float32  scale;
    PIX       *pixd;
        for (i = 2; i < 15; i++) {
            scale = 1. / (l_float32)i;
            startTimer();
            pixd = pixScaleToGrayMipmap(pixs, scale);
            fprintf(stderr, "Time for scale %7.3f: %7.3f sec\n",
            scale, stopTimer());
            pixDisplayWithTitle(pixd, 75 * i, 100, "scale mipmap", DISPLAY);
            pixDestroy(&pixd);
        }
        for (i = 8; i < 12; i++) {
            scale = 1. / (l_float32)(2 * i);
            startTimer();
            pixd = pixScaleToGrayMipmap(pixs, scale);
            fprintf(stderr, "Time for scale %7.3f: %7.3f sec\n",
            scale, stopTimer());
            pixDisplayWithTitle(pixd, 100 * i, 600, "scale mipmap", DISPLAY);
            pixDestroy(&pixd);
        }
    }
#endif

#if 1
        /* Test several methods for antialiased reduction,
	 * along with sharpening */
    if (d != 1)
    {
        PIX *pixt1, *pixt2, *pixt3, *pixt4, *pixt5, *pixt6, *pixt7;
        l_float32 SCALING = 0.27;
        l_int32   SIZE = 7;
        l_int32   smooth;
        l_float32 FRACT = 1.0;

        smooth = SIZE / 2;

        startTimer();
        pixt1 = pixScaleSmooth(pixs, SCALING, SCALING);
        fprintf(stderr, "fast scale: %5.3f sec\n", stopTimer());
        pixDisplayWithTitle(pixt1, 0, 0, "smooth scaling", DISPLAY);
        pixWrite("/tmp/sm_1.png", pixt1, IFF_PNG);
        pixt2 = pixUnsharpMasking(pixt1, 1, 0.3);
        pixDisplayWithTitle(pixt2, 150, 0, "sharpened scaling", DISPLAY);

        startTimer();
        pixt3 = pixBlockconv(pixs, smooth, smooth);
        pixt4 = pixScaleBySampling(pixt3, SCALING, SCALING);
        fprintf(stderr, "slow scale: %5.3f sec\n", stopTimer());
        pixDisplayWithTitle(pixt4, 200, 200, "sampled scaling", DISPLAY);
        pixWrite("/tmp/sm_2.png", pixt4, IFF_PNG);

        startTimer();
        pixt5 = pixUnsharpMasking(pixs, smooth, FRACT);
        pixt6 = pixBlockconv(pixt5, smooth, smooth);
        pixt7 = pixScaleBySampling(pixt6, SCALING, SCALING);
        fprintf(stderr, "very slow scale + sharp: %5.3f sec\n", stopTimer());
        pixDisplayWithTitle(pixt7, 500, 200, "sampled scaling", DISPLAY);
        pixWrite("/tmp/sm_3.jpg", pixt7, IFF_JFIF_JPEG);

        pixDestroy(&pixt1);
        pixDestroy(&pixt2);
        pixDestroy(&pixt3);
        pixDestroy(&pixt4);
        pixDestroy(&pixt5);
        pixDestroy(&pixt6);
        pixDestroy(&pixt7);
    }
#endif


#if 1
        /* Test the color scaling function, comparing the
	 * special case of scaling factor 2.0 with the 
	 * general case. */
    if (d == 32) 
    {
    PIX    *pix1, *pix2, *pixd;
    NUMA   *nar, *nag, *nab, *naseq;
    GPLOT  *gplot;

        startTimer();
        pix1 = pixScaleColorLI(pixs, 2.00001, 2.0);
        fprintf(stderr, " Time with regular LI: %7.3f\n", stopTimer());
        pixWrite("/tmp/color1.jpg", pix1, IFF_JFIF_JPEG);
        startTimer();
        pix2 = pixScaleColorLI(pixs, 2.0, 2.0);
        fprintf(stderr, " Time with 2x LI: %7.3f\n", stopTimer());
        pixWrite("/tmp/color2.jpg", pix2, IFF_JFIF_JPEG);

        pixd = pixAbsDifference(pix1, pix2);
        pixGetColorHistogram(pixd, 1, &nar, &nag, &nab);
        naseq = numaMakeSequence(0., 1., 256);
        gplot = gplotCreate("/tmp/plot_absdiff", GPLOT_X11, "Number vs diff",
                            "diff", "number");
        gplotSetScaling(gplot, GPLOT_LOG_SCALE_Y);
        gplotAddPlot(gplot, naseq, nar, GPLOT_POINTS, "red");
        gplotAddPlot(gplot, naseq, nag, GPLOT_POINTS, "green");
        gplotAddPlot(gplot, naseq, nab, GPLOT_POINTS, "blue");
        gplotMakeOutput(gplot);
        pixDestroy(&pix1);
        pixDestroy(&pix2);
        pixDestroy(&pixd);
        numaDestroy(&naseq);
        numaDestroy(&nar);
        numaDestroy(&nag);
        numaDestroy(&nab);
        gplotDestroy(&gplot);
    }
#endif


#if 1
        /* Test the gray LI scaling function, comparing the
	 * special cases of scaling factor 2.0 and 4.0 with the 
	 * general case */
    if (d == 8 || d == 32)
    {
    PIX    *pixt, *pix0, *pix1, *pix2, *pixd;
    NUMA   *nagray, *naseq;
    GPLOT  *gplot;

        if (d == 8)
            pixt = pixClone(pixs);
        else
            pixt = pixConvertRGBToGray(pixs, 0.33, 0.34, 0.33);
        pix0 = pixScaleGrayLI(pixt, 0.5, 0.5);

#if 1
        startTimer();
        pix1 = pixScaleGrayLI(pix0, 2.00001, 2.0);
        fprintf(stderr, " Time with regular LI 2x: %7.3f\n", stopTimer());
        startTimer();
        pix2 = pixScaleGrayLI(pix0, 2.0, 2.0);
        fprintf(stderr, " Time with 2x LI: %7.3f\n", stopTimer());
#else
        startTimer();
        pix1 = pixScaleGrayLI(pix0, 4.00001, 4.0);
        fprintf(stderr, " Time with regular LI 4x: %7.3f\n", stopTimer());
        startTimer();
        pix2 = pixScaleGrayLI(pix0, 4.0, 4.0);
        fprintf(stderr, " Time with 2x LI: %7.3f\n", stopTimer());
#endif
        pixWrite("/tmp/gray1", pix1, IFF_JFIF_JPEG);
        pixWrite("/tmp/gray2", pix2, IFF_JFIF_JPEG);

        pixd = pixAbsDifference(pix1, pix2);
        nagray = pixGetGrayHistogram(pixd, 1);
        naseq = numaMakeSequence(0., 1., 256);
        gplot = gplotCreate("/tmp/g_absdiff", GPLOT_X11, "Number vs diff",
                            "diff", "number");
        gplotSetScaling(gplot, GPLOT_LOG_SCALE_Y);
        gplotAddPlot(gplot, naseq, nagray, GPLOT_POINTS, "gray");
        gplotMakeOutput(gplot);
        pixDestroy(&pixt);
        pixDestroy(&pix0);
        pixDestroy(&pix1);
        pixDestroy(&pix2);
        pixDestroy(&pixd);
        numaDestroy(&naseq);
        numaDestroy(&nagray);
        gplotDestroy(&gplot);
    }
#endif

    pixDestroy(&pixs);
    return 0;
}
コード例 #10
0
ファイル: morphseq_reg.c プロジェクト: 0xkasun/Dummy_Tes
main(int    argc,
     char **argv)
{
char        *infile;
PIX         *pixs, *pixg, *pixc, *pixd;
static char  mainName[] = "morphseq_reg";

    if (argc != 1)
	return ERROR_INT(" Syntax:  morphseq_reg", mainName, 1);

    pixs = pixRead("feyn.tif");

        /* 1 bpp */
    pixd = pixMorphSequence(pixs, SEQUENCE1, -1);
    pixDestroy(&pixd);
    pixd = pixMorphSequence(pixs, SEQUENCE1, DISPLAY_SEPARATION);
    pixWrite("/tmp/morphseq1.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

    pixd = pixMorphCompSequence(pixs, SEQUENCE2, -2);
    pixDestroy(&pixd);
    pixd = pixMorphCompSequence(pixs, SEQUENCE2, DISPLAY_SEPARATION);
    pixWrite("/tmp/morphseq2.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

    pixd = pixMorphSequenceDwa(pixs, SEQUENCE2, -3);
    pixDestroy(&pixd);
    pixd = pixMorphSequenceDwa(pixs, SEQUENCE2, DISPLAY_SEPARATION);
    pixWrite("/tmp/morphseq3.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

    pixd = pixMorphCompSequenceDwa(pixs, SEQUENCE2, -4);
    pixDestroy(&pixd);
    pixd = pixMorphCompSequenceDwa(pixs, SEQUENCE2, DISPLAY_SEPARATION);
    pixWrite("/tmp/morphseq4.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

        /* 8 bpp */
    pixg = pixScaleToGray(pixs, 0.25);
    pixd = pixGrayMorphSequence(pixg, SEQUENCE3, -5, 150);
    pixDestroy(&pixd);
    pixd = pixGrayMorphSequence(pixg, SEQUENCE3, DISPLAY_SEPARATION, 150);
    pixWrite("/tmp/morphseq5.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

    pixd = pixGrayMorphSequence(pixg, SEQUENCE4, -6, 300);
    pixWrite("/tmp/morphseq6.png", pixd, IFF_PNG);
    pixDestroy(&pixd);

        /* 32 bpp */
    pixc = pixRead("wyom.jpg");
    pixd = pixColorMorphSequence(pixc, SEQUENCE5, -7, 150);
    pixDestroy(&pixd);
    pixd = pixColorMorphSequence(pixc, SEQUENCE5, DISPLAY_SEPARATION, 450);
    pixWrite("/tmp/morphseq7.png", pixd, IFF_PNG);
    pixDestroy(&pixc);
    pixDestroy(&pixd);

        /* Syntax error handling */
    fprintf(stderr, " ------------ Error messages follow ------------------\n");
    pixd = pixMorphSequence(pixs, BAD_SEQUENCE, 50);  /* fails; returns null */
    pixd = pixGrayMorphSequence(pixg, BAD_SEQUENCE, 50, 0);  /* this fails */

    pixDestroy(&pixg);
    pixDestroy(&pixs);
    return 0;
}