コード例 #1
0
ファイル: test.c プロジェクト: choughtosh/lib_xcore_c
/*
 * Configure PORT_1C as data with PORT_1D as the valid signal. Test receiving
 * two different words of data and check they are the correct values.
 */
void port_test_input(chanend c)
{
  port p = port_enable(XS1_PORT_1C);
  port_set_buffered(p);
  port_set_transfer_width(p, 32);

  port p_ready = port_enable(XS1_PORT_1D);
  clock clk = clock_enable(XS1_CLKBLK_2);
  clock_start(clk);

  port_configure_in_strobed_slave(p, p_ready, clk);

  chan_output_word(c, 0); // Send ack

  unsigned int x = port_input(p);
  if (x != 0xfeedbeef) {
    debug_printf("Error %x received instead of 0xfeedbeef\n", x);
  }

  x = port_input(p);
  if (x != 0x12345678) {
    debug_printf("Error %x received instead of 0x12345678\n", x);
  }

  chan_output_word(c, 0); // Send ack

  port_disable(p);
  port_disable(p_ready);
  clock_disable(clk);

  // Get information about the tile/core running the server for debug messages
  unsigned tile_id = get_local_tile_id();
  unsigned core_id = get_logical_core_id();
  debug_printf("%x:%d: input done\n", tile_id, core_id);
}
コード例 #2
0
ファイル: test.c プロジェクト: choughtosh/lib_xcore_c
/*
 * Configure PORT_1A as data with PORT_1B as the valid signal. Ensure that the
 * receiver is ready using a channel end. Send a word of data, delay for a while
 * and send another word to ensure the valid signals are functioning.
 */
void port_test_output(chanend c)
{
  port p = port_enable(XS1_PORT_1A);
  port_set_buffered(p);
  port_set_transfer_width(p, 32);

  port p_ready = port_enable(XS1_PORT_1B);
  clock clk = clock_enable(XS1_CLKBLK_1);
  clock_start(clk);

  port_configure_out_strobed_master(p, p_ready, clk, 0);

  chan_input_word(c); // Wait for ack

  port_output(p, 0xfeedbeef);

  timer tmr = timer_alloc();
  timer_delay(tmr, 1000);
  timer_free(tmr);

  port_output(p, 0x12345678);

  chan_input_word(c); // Wait for ack

  port_disable(p);
  port_disable(p_ready);
  clock_disable(clk);

  // Get information about the tile/core running the server for debug messages
  unsigned tile_id = get_local_tile_id();
  unsigned core_id = get_logical_core_id();
  debug_printf("%x:%d: output done\n", tile_id, core_id);
}
コード例 #3
0
OMX_ERRORTYPE process_event(HTEST *hTest, MSG *pMsg)
{
	OMX_EVENTTYPE event = pMsg->data.event.eEvent;
	OMX_U32 nPortIndex = pMsg->data.event.nData1;

	if(event == OMX_EventPortSettingsChanged)
	{
		port_disable(hTest, nPortIndex);
		port_enable(hTest, nPortIndex);

		OMX_STATETYPE eState = OMX_StateInvalid;
		OMX_GetState(hTest->hComponent, &eState);
		if(eState == OMX_StateExecuting)
		{
			/* Send output buffers */
			OMX_S32 i;
			for(i=0; i<hTest->nBufferHdr[1]; i++)
			{
				hTest->pBufferHdr[1][i]->nFilledLen = 0;
				hTest->pBufferHdr[1][i]->nOffset = 0;
				OMX_FillThisBuffer(hTest->hComponent, hTest->pBufferHdr[1][i]);
			}
		}
	}

	return OMX_ErrorNone;
}
コード例 #4
0
ファイル: novena-usb-hub.c プロジェクト: xobs/novena-usb-hub
int main(int argc, char * const *argv) {
	int power_up = 0;
	int power_down = 0;
	int action_taken = 0;
	int ret;

	struct state st;

	int ch;

	struct option longopts[] = {
		{ "list-ports",	no_argument,		NULL,		'l' },
		{ "port-enable",required_argument,	&power_up,	'e' },
		{ "port-disable",required_argument,	&power_down,	'd' },
		{ "help",	no_argument,		NULL,		'h' },
		{ NULL,		0,			NULL,		0 }
	};

	memset(&st, 0, sizeof(st));

	st.progname = argv[0];
	ret = novena_hub_init(&st);
	if (ret)
		return ret;

	while ((ch = getopt_long(argc, argv, "le:d:h", longopts, NULL)) != -1) {
		switch (ch) {
			case 'h':
				print_help(&st);
				action_taken = 1;
				break;

			case 'e':
				port_enable(&st, optarg);
				action_taken = 1;
				break;

			case 'd':
				port_disable(&st, optarg);
				action_taken = 1;
				break;

			case 'l':
				list_ports(&st);
				action_taken = 1;
				break;

			default:
				break;
		}
	}

	if (!action_taken)
		print_help(&st);

	novena_hub_deinit(&st);

	return 0;
}
コード例 #5
0
ファイル: of-config1.1.1.c プロジェクト: bisdn/of-config
/* !DO NOT ALTER FUNCTION SIGNATURE! */
int callback_ofc_capable_switch_ofc_resources_ofc_port_ofc_configuration_ofc_admin_state (void ** data, XMLDIFF_OP op, xmlNodePtr node, struct nc_err** error)
{
	nc_verb_verbose("%s: data=%p, op=%d\n", __PRETTY_FUNCTION__, data, op);
	print_element_names(node, 0);

	int rv = EXIT_SUCCESS;
	int down = 0;	// default is up

	if ((XMLDIFF_ADD|XMLDIFF_MOD) & op) {

		if (xmlStrEqual(XML_GET_CONTENT(node->children), BAD_CAST "down")) {
			down = 1;
		}

		// sanity check... if the content is not "down", it has to be "up"
		assert(down || xmlStrEqual(XML_GET_CONTENT(node->children), BAD_CAST "up"));

		// currently the resource-id is the port name (even if the name is not set
		xmlNodePtr tmp = find_element(BAD_CAST "resource-id",  node->parent->parent->children);
		assert(tmp);

		if (down) {
			// set interface down
			nc_verb_verbose("set interface %s down\n", tmp->children->content);
			if (port_disable(ofc_state.xmp_client_handle, tmp->children->content)) {
				rv = EXIT_FAILURE;
			}

		} else {
			// set interface up
			nc_verb_verbose("set interface %s up\n", tmp->children->content);
			if (port_enable(ofc_state.xmp_client_handle, tmp->children->content)) {
				rv = EXIT_FAILURE;
			}
		}

	} else if (XMLDIFF_REM & op) {
		// setting interface up
	} else {
		nc_verb_error("unsupported op");
		assert(0);
	}


	return rv;
}
コード例 #6
0
OMX_ERRORTYPE parser_process_port_setting_changed(HTEST *hTest,OMX_U32 nPortIndex)
{
	OMX_ERRORTYPE ret = OMX_ErrorNone;
	port_disable(hTest,nPortIndex);
	OMX_PARAM_U32TYPE sU32;
	OMX_INIT_STRUCT(&sU32, OMX_PARAM_U32TYPE);
	sU32.nPortIndex = nPortIndex;
	ret = OMX_GetParameter(hTest->hComponent,OMX_IndexParamNumAvailableStreams,&sU32);
	if (ret != OMX_ErrorNone)
		return ret;

	printf("%s,%d,track %d, number of available stream is %d.\n",__FUNCTION__,__LINE__,sU32.nPortIndex,sU32.nU32);

	/*active strem number should be from 0 to NumAvailable - 1*/
	sU32.nU32 = sU32.nU32 - 1;
	ret = OMX_SetParameter(hTest->hComponent,OMX_IndexParamActiveStream,&sU32);
	if (ret != OMX_ErrorNone)
		return ret;

	printf("%s,%d,track %d, set active stream number %d.\n",__FUNCTION__,__LINE__,sU32.nPortIndex,sU32.nU32);


	OMX_PARAM_PORTDEFINITIONTYPE sPortDef;
	OMX_INIT_STRUCT(&sPortDef, OMX_PARAM_PORTDEFINITIONTYPE);
	sPortDef.nPortIndex = nPortIndex;
	ret =   OMX_GetParameter(hTest->hComponent, OMX_IndexParamPortDefinition, &sPortDef);
	if (ret != OMX_ErrorNone)
		return ret;

	if (nPortIndex == hTest->nAudioTrackNum)
		printf("%s,%d,audio track %d, compress format %d.\n",__FUNCTION__,__LINE__,sPortDef.nPortIndex,sPortDef.format.audio.eEncoding);
	else
		printf("%s,%d,video track %d, compress format %d.\n",__FUNCTION__,__LINE__,sPortDef.nPortIndex,sPortDef.format.video.eCompressionFormat);

	port_enable(hTest,nPortIndex);

	return ret;
}
コード例 #7
0
OMX_ERRORTYPE cmd_process(HTEST *hTest)
{
    char rep[10];
    OMX_BOOL bExit = OMX_FALSE;

    while(bExit == OMX_FALSE) {
        printf("Input test cmd:\n");
        printf("[f]flush\n");
        printf("[x]exit\n");
        scanf("%s", rep);
        if(rep[0] == 'l')
            load_component(hTest);
        else if(rep[0] == 's') {
            OMX_U32 state = 0;
            printf("State trans to:\n");
            printf("0 -- Invalid\n");
            printf("1 -- Loaded\n");
            printf("2 -- Idle\n");
            printf("3 -- Executing\n");
            printf("4 -- Pause\n");
            printf("5 -- WaitForResources\n");
            scanf("%d", &state);
            StateTrans(hTest, (OMX_STATETYPE)state);
        }
        else if(rep[0] == 'f') {
            OMX_U32 nPortIndex = 0;
            printf("Want to flush port number:\n");
            scanf("%d", &nPortIndex);
            port_flush(hTest, nPortIndex);
        }
        else if(rep[0] == 'd') {
            OMX_U32 nPortIndex = 0;
            printf("Want to disbale port number:\n");
            scanf("%d", &nPortIndex);
            port_disable(hTest, nPortIndex);
        }
        else if(rep[0] == 'e') {
            OMX_U32 nPortIndex = 0;
            printf("Want to enable port number:\n");
            scanf("%d", &nPortIndex);
            port_enable(hTest, nPortIndex);
        }
        else if(rep[0] == 'k') {
            OMX_U32 nSeekPos = 0;
            printf("seek to second:\n");
            scanf("%d", &nSeekPos);
            OMX_U32 nSeekMode = 0;
            printf("seek mode [0:Fast,1:Accurate]:\n");
            scanf("%d", &nSeekMode);
            do_seek(hTest, nSeekPos, (OMX_TIME_SEEKMODETYPE)nSeekMode);
        }
        else if(rep[0] == 'x') {
            MSG sMsg;
            sMsg.type = EXIT;
            hTest->pMsgQ->Add(&sMsg);
            hTest->bStop = OMX_TRUE;
            bExit = OMX_TRUE;
            StateTrans(hTest, (OMX_STATETYPE)2);
            StateTrans(hTest, (OMX_STATETYPE)1);
            unload_component(hTest);
        }
    }

    return OMX_ErrorNone;
}
コード例 #8
0
ファイル: main.c プロジェクト: 2thetop/t2-firmware
void bridge_open_2() {
    port_enable(&port_b);
}
コード例 #9
0
ファイル: main.c プロジェクト: 2thetop/t2-firmware
void bridge_open_1() {
    port_enable(&port_a);
}