esp_err_t esp_modem_exit_ppp(modem_dte_t *dte)
{
modem_dce_t *dce = dte->dce;
MODEM_CHECK(dce, "DTE has not yet bind with DCE", err);
esp_modem_dte_t *esp_dte = __containerof(dte, esp_modem_dte_t, parent);
/* Shutdown of PPP protocols */
MODEM_CHECK(pppapi_close(esp_dte->ppp, 0) == ERR_OK, "close ppp connection failed", err);
/* Enter command mode */
MODEM_CHECK(dte->change_mode(dte, MODEM_COMMAND_MODE) == ESP_OK, "enter command mode failed", err);
/* Hang up */
MODEM_CHECK(dce->hang_up(dce) == ESP_OK, "hang up failed", err);
return ESP_OK;
err:
return ESP_FAIL;
}
STATIC mp_obj_t ppp_active(size_t n_args, const mp_obj_t *args) {
ppp_if_obj_t *self = MP_OBJ_TO_PTR(args[0]);
if (n_args > 1) {
if (mp_obj_is_true(args[1])) {
if (self->active) {
return mp_const_true;
}
self->pcb = pppapi_pppos_create(&self->pppif, ppp_output_callback, ppp_status_cb, self);
if (self->pcb == NULL) {
mp_raise_msg(&mp_type_RuntimeError, "init failed");
}
pppapi_set_default(self->pcb);
pppapi_connect(self->pcb, 0);
xTaskCreate(pppos_client_task, "ppp", 2048, self, 1, (TaskHandle_t*)&self->client_task_handle);
self->active = true;
} else {
if (!self->active) {
return mp_const_false;
}
// Wait for PPPERR_USER, with timeout
pppapi_close(self->pcb, 0);
uint32_t t0 = mp_hal_ticks_ms();
while (!self->clean_close && mp_hal_ticks_ms() - t0 < PPP_CLOSE_TIMEOUT_MS) {
mp_hal_delay_ms(10);
}
// Shutdown task
xTaskNotifyGive(self->client_task_handle);
t0 = mp_hal_ticks_ms();
while (self->client_task_handle != NULL && mp_hal_ticks_ms() - t0 < PPP_CLOSE_TIMEOUT_MS) {
mp_hal_delay_ms(10);
}
// Release PPP
pppapi_free(self->pcb);
self->pcb = NULL;
self->active = false;
self->connected = false;
self->clean_close = false;
}
}
return mp_obj_new_bool(self->active);
}
/* This is somewhat different to other ports: we have a main loop here:
* a dedicated task that waits for packets to arrive. This would normally be
* done from interrupt context with embedded hardware, but we don't get an
* interrupt in windows for that :-) */
static void
main_loop(void)
{
#if !NO_SYS
err_t err;
sys_sem_t init_sem;
#endif /* NO_SYS */
#if USE_PPP
#if !USE_ETHERNET
int count;
u8_t rxbuf[1024];
#endif
volatile int callClosePpp = 0;
#endif /* USE_PPP */
/* initialize lwIP stack, network interfaces and applications */
#if NO_SYS
lwip_init();
test_init(NULL);
#else /* NO_SYS */
err = sys_sem_new(&init_sem, 0);
LWIP_ASSERT("failed to create init_sem", err == ERR_OK);
tcpip_init(test_init, &init_sem);
/* we have to wait for initialization to finish before
* calling update_adapter()! */
sys_sem_wait(&init_sem);
sys_sem_free(&init_sem);
#endif /* NO_SYS */
#if (LWIP_SOCKET || LWIP_NETCONN) && LWIP_NETCONN_SEM_PER_THREAD
netconn_thread_init();
#endif
/* MAIN LOOP for driver update (and timers if NO_SYS) */
while (!_kbhit()) {
#if NO_SYS
/* handle timers (already done in tcpip.c when NO_SYS=0) */
sys_check_timeouts();
#endif /* NO_SYS */
#if USE_ETHERNET
#if !PCAPIF_RX_USE_THREAD
/* check for packets and link status*/
pcapif_poll(&netif);
/* When pcapif_poll comes back, there are not packets, so sleep to
prevent 100% CPU load. Don't do this in an embedded system since it
increases latency! */
sys_msleep(1);
#else /* !PCAPIF_RX_USE_THREAD */
sys_msleep(50);
#endif /* !PCAPIF_RX_USE_THREAD */
#else /* USE_ETHERNET */
/* try to read characters from serial line and pass them to PPPoS */
count = sio_read(ppp_sio, (u8_t*)rxbuf, 1024);
if(count > 0) {
pppos_input(ppp, rxbuf, count);
} else {
/* nothing received, give other tasks a chance to run */
sys_msleep(1);
}
#endif /* USE_ETHERNET */
#if USE_SLIPIF
slipif_poll(&slipif1);
#if USE_SLIPIF > 1
slipif_poll(&slipif2);
#endif /* USE_SLIPIF > 1 */
#endif /* USE_SLIPIF */
#if ENABLE_LOOPBACK && !LWIP_NETIF_LOOPBACK_MULTITHREADING
/* check for loopback packets on all netifs */
netif_poll_all();
#endif /* ENABLE_LOOPBACK && !LWIP_NETIF_LOOPBACK_MULTITHREADING */
#if USE_PPP
{
int do_hup = 0;
if(do_hup) {
ppp_close(ppp, 1);
do_hup = 0;
}
}
if(callClosePpp && ppp) {
/* make sure to disconnect PPP before stopping the program... */
callClosePpp = 0;
#if NO_SYS
ppp_close(ppp, 0);
#else
pppapi_close(ppp, 0);
#endif
ppp = NULL;
}
#endif /* USE_PPP */
}
#if USE_PPP
if(ppp) {
u32_t started;
printf("Closing PPP connection...\n");
/* make sure to disconnect PPP before stopping the program... */
#if NO_SYS
ppp_close(ppp, 0);
#else
pppapi_close(ppp, 0);
#endif
ppp = NULL;
/* Wait for some time to let PPP finish... */
started = sys_now();
do
{
#if USE_ETHERNET && !PCAPIF_RX_USE_THREAD
pcapif_poll(&netif);
#else /* USE_ETHERNET && !PCAPIF_RX_USE_THREAD */
sys_msleep(50);
#endif /* USE_ETHERNET && !PCAPIF_RX_USE_THREAD */
/* @todo: need a better check here: only wait until PPP is down */
} while(sys_now() - started < 5000);
}
#endif /* USE_PPP */
#if (LWIP_SOCKET || LWIP_NETCONN) && LWIP_NETCONN_SEM_PER_THREAD
netconn_thread_cleanup();
#endif
#if USE_ETHERNET
/* release the pcap library... */
pcapif_shutdown(&netif);
#endif /* USE_ETHERNET */
}
