C++ (Cpp) print_sw_hciの例

コード例 #1

ファイル: sw_hci_sun7i.c プロジェクト: tempbottle/InDashNet.Open.UN2000

/*
*******************************************************************************
*                     init_sw_hci
*
* Description:
*    void
*
* Parameters:
*    void
*
* Return value:
*    void
*
* note:
*    void
*
*******************************************************************************
*/
static int init_sw_hci(struct sw_hci_hcd *sw_hci, u32 usbc_no, u32 ohci, const char *hci_name)
{
    s32 ret = 0;

    memset(sw_hci, 0, sizeof(struct sw_hci_hcd));

    sw_hci->usbc_no   = usbc_no;
    sw_hci->usbc_type = ohci ? SW_USB_OHCI : SW_USB_EHCI;

    if(ohci){
        sw_hci->irq_no = ohci_irq_no[sw_hci->usbc_no];
    }else{
        sw_hci->irq_no = ehci_irq_no[sw_hci->usbc_no];
    }

    sprintf(sw_hci->hci_name, "%s%d", hci_name, sw_hci->usbc_no);

	sw_hci->usb_vbase		= (void __iomem	*)usbc_base[sw_hci->usbc_no];
	sw_hci->sram_vbase		= (void __iomem	*)SW_VA_SRAM_IO_BASE;
	sw_hci->clock_vbase     = (void __iomem	*)SW_VA_CCM_IO_BASE;
	sw_hci->gpio_vbase		= (void __iomem	*)SW_VA_PORTC_IO_BASE;
	sw_hci->sdram_vbase     = (void __iomem	*)SW_VA_DRAM_IO_BASE;

	get_usb_cfg(sw_hci);
	sw_hci->open_clock          = open_clock;
	sw_hci->close_clock         = close_clock;
	sw_hci->set_power           = sw_set_vbus;
	sw_hci->usb_passby          = usb_passby;
    sw_hci->port_configure      = hci_port_configure;

    ret = clock_init(sw_hci, ohci);
    if(ret != 0){
        DMSG_PANIC("ERR: clock_init failed\n");
        goto failed1;
    }

    print_sw_hci(sw_hci);

    return 0;

failed1:

    return -1;
}

コード例 #2

ファイル: sw_hci_sunxi.c プロジェクト: EddyKuo/linux-sdk-kernel-source

static int init_sw_hci(struct sw_hci_hcd *sw_hci, u32 usbc_no, u32 ohci,
		       const char *hci_name)
{
	s32 ret = 0;
	u32 drv_vbus_Handle = 0;

	memset(sw_hci, 0, sizeof(struct sw_hci_hcd));

	sw_hci->usbc_no = usbc_no;

	sprintf(sw_hci->hci_name, "%s%d", hci_name, sw_hci->usbc_no);

	sw_hci->usb_vbase = (void __iomem *)usbc_base[sw_hci->usbc_no];

	get_usb_cfg(sw_hci);

	drv_vbus_Handle = alloc_pin(&sw_hci->drv_vbus_gpio_set);
	if (drv_vbus_Handle == 0) {
		DMSG_PANIC("ERR: alloc_pin failed\n");
		goto failed1;
	}
	sw_hci->drv_vbus_Handle = drv_vbus_Handle;

	sw_hci->open_clock = open_clock;
	sw_hci->close_clock = close_clock;
	sw_hci->set_power = sw_set_vbus;
	sw_hci->usb_passby = usb_passby;
	sw_hci->port_configure = hci_port_configure;

	ret = clock_init(sw_hci, ohci);
	if (ret != 0) {
		DMSG_PANIC("ERR: clock_init failed\n");
		goto failed1;
	}

	print_sw_hci(sw_hci);

	return 0;

failed1:
	return -1;
}