/*---------------------------------------------------------------------------*/
PROCESS_THREAD(tcpip_process, ev, data, buf)
{
PROCESS_BEGIN();
#if UIP_TCP
{
static unsigned char i;
for(i = 0; i < UIP_LISTENPORTS; ++i) {
s.listenports[i].port = 0;
}
s.p = PROCESS_CURRENT();
}
#endif
tcpip_event = process_alloc_event();
#if UIP_CONF_ICMP6
tcpip_icmp6_event = process_alloc_event();
#endif /* UIP_CONF_ICMP6 */
etimer_set(&periodic, CLOCK_SECOND / 2);
uip_init();
#ifdef UIP_FALLBACK_INTERFACE
UIP_FALLBACK_INTERFACE.init();
#endif
/* initialize RPL if configured for using RPL */
#if NETSTACK_CONF_WITH_IPV6 && UIP_CONF_IPV6_RPL
rpl_init();
#endif /* UIP_CONF_IPV6_RPL */
while(1) {
PROCESS_YIELD();
eventhandler(ev, data, buf);
}
PROCESS_END();
}
PROCESS_THREAD(end_node_process, ev, data)
{
PROCESS_BEGIN();
static struct etimer et;
etimer_set(&et, CLOCK_SECOND);
printf("Using NodeId: %X\n\r", get_nodeid());
/* Turn off AES */
netstack_aes_set_active(1);
/* Allocate events */
reconnect_event = process_alloc_event();
/* Reconnect from here */
while(1) {
if(simple_rpl_parent() == NULL) {
printf("\r\n Connecting to a Wireless Network...\r\n");
etimer_set(&et, CLOCK_SECOND / 1);
while(simple_rpl_parent() == NULL) {
PROCESS_YIELD_UNTIL(etimer_expired(&et));
etimer_reset(&et);
}
printf("\r\n Connected to Wireless network\r\n");
}
process_start(&prox_agent_process, NULL);
/* Reset reconnecting flag */
reconnecting = 0;
/* Main loop */
while(1) {
PROCESS_WAIT_EVENT();
if(ev == reconnect_event) {
reconnecting = 1;
etimer_set(&reconnect_timer, CLOCK_SECOND*10);
}
if(reconnecting &&
etimer_expired(&reconnect_timer)) {
break;
}
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
static void
tcpip_handler(void)
{
char *appdata;
unsigned char i;
blink_event = process_alloc_event();
if(uip_newdata()) {
appdata = (char *)uip_appdata;
appdata[uip_datalen()] = 0;
for(i = 0; i < 4; i++){
dht11data[i] = *(appdata + i);
}
PRINTF("DATA recv '%s' from ", appdata);
PRINTF("%d",
UIP_IP_BUF->srcipaddr.u8[sizeof(UIP_IP_BUF->srcipaddr.u8) - 1]);
PRINTF("\n");
PRINTF("wendu is %c%c, shidu is %c%c \n", *appdata,*(appdata+1),*(appdata+2),*(appdata+3));
// PRINTF("DATA sending reply\n");
// uip_ipaddr_copy(&server_conn->ripaddr, &UIP_IP_BUF->srcipaddr);
/*
if(strncmp(appdata, "RED", 3) == 0) {
leds_on(LEDS_RED);
leds_off(LEDS_GREEN);
sta = 0;
}
if(strncmp(appdata, "GREEN", 5) == 0) {
leds_on(LEDS_GREEN);
leds_off(LEDS_RED);
sta = 0;
}
if(strncmp(appdata,"BLINK",5) == 0) {
process_post(&udp_server_process, blink_event, NULL);
sta = 1;
}
if(strncmp(appdata,"OFF",3) == 0) {
leds_off(LEDS_RED | LEDS_GREEN);
sta = 0;
}
#if SERVER_REPLY
PRINTF("DATA sending reply\n");
uip_ipaddr_copy(&server_conn->ripaddr, &UIP_IP_BUF->srcipaddr);
uip_udp_packet_send(server_conn, "Reply", sizeof("Reply"));
uip_create_unspecified(&server_conn->ripaddr);
#endif
*/
}
}
/*---------------------------------------------------------------------------*/
void
mqtt_init(void)
{
static uint8_t inited = 0;
if(!inited) {
mqtt_do_connect_tcp_event = process_alloc_event();
mqtt_do_connect_mqtt_event = process_alloc_event();
mqtt_do_disconnect_mqtt_event = process_alloc_event();
mqtt_do_subscribe_event = process_alloc_event();
mqtt_do_unsubscribe_event = process_alloc_event();
mqtt_do_publish_event = process_alloc_event();
mqtt_do_pingreq_event = process_alloc_event();
mqtt_continue_send_event = process_alloc_event();
mqtt_update_event = process_alloc_event();
list_init(mqtt_conn_list);
process_start(&mqtt_process, NULL);
inited = 1;
}
}
static void network_init(void) {
struct uip_eth_addr macaddr;
net_event = process_alloc_event();
#if CONFIG_DRIVERS_ENC28J60
// Set our MAC address
memcpy_P(&macaddr, &mac, sizeof(mac));
// Set up ethernet
enc28j60Init(&macaddr);
enc28j60Write(ECOCON, 0 & 0x7); // Disable clock output
_delay_ms(10);
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDA=green LEDB=yellow
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
enc28j60PhyWrite(PHLCON, 0x476);
_delay_ms(100);
#endif
#if CONFIG_DRIVERS_ENC424J600
// Initialise the hardware
enc424j600Init();
// Disable clock output and set up LED stretch
uint16_t econ2 = enc424j600ReadReg(ECON2);
econ2 |= ECON2_STRCH; // stretch LED duration
econ2 &= ~(ECON2_COCON3 | ECON2_COCON2 | ECON2_COCON1 | ECON2_COCON0);
enc424j600WriteReg(ECON2, econ2);
// Set up LEDs
uint16_t eidled = enc424j600ReadReg(EIDLED);
eidled &= 0x00ff; // and-out the high byte (LED config)
eidled |= EIDLED_LACFG1 | EIDLED_LBCFG2 | EIDLED_LBCFG1;
enc424j600WriteReg(EIDLED, eidled);
// Get the MAC address
enc424j600GetMACAddr(macaddr.addr);
#endif
#if !CONFIG_LIB_CONTIKI_IPV6
// Set up timers
timer_set(&arp_timer, CLOCK_SECOND * 10);
#endif
uip_setethaddr(macaddr);
}
// callback for receiving client's needed file ranges
static void server_recv(struct broadcast_conn *c, const rimeaddr_t *from)
{
// store received data packet
uint8_t *range_recv = (uint8_t *)packetbuf_dataptr(); //Get a pointer to the data in the packetbuf.
// for debugging purposes
printf("ranges received from %d.%d: '%d, %d'\n",
from->u8[0], from->u8[1], range_recv[0], range_recv[1]);
// allocate event that ranges are received
ranges_ready = process_alloc_event(); //Allocate a global event number.
// start the send files process and pass the received ranges
process_post(&send_files, ranges_ready, range_recv);
}
void drvr_init()
{
U8 part_num, ver_num, irq;
U16 man_id = 0;
memset(&dcb, 0, sizeof(at86_dcb_t));
delay_us(TIME_TO_ENTER_P_ON);
hal_init();
// reset all regs in at86rf
drvr_at86_reset();
part_num = hal_register_read(AT86_PART_NUM);
ver_num = hal_register_read(AT86_VERSION_NUM);
man_id |= hal_register_read(AT86_MAN_ID_1) << 8;
man_id |= hal_register_read(AT86_MAN_ID_0);
hal_register_write(AT86_IRQ_MASK, 0);
irq = hal_register_read(AT86_IRQ_STATUS);
// force transceiver off while we configure the intps
hal_subregister_write(SR_TRX_CMD, CMD_FORCE_TRX_OFF);
delay_us(TIME_P_ON_TO_TRX_OFF);
// wait for transceiver to transition to the off state
while (drvr_get_trx_state() != TRX_OFF);
hal_register_write(AT86_IRQ_MASK, (1<<IRQ_MASK_TRX_END) | (1<<IRQ_MASK_RX_START));
// configure the CSMA parameters
drvr_config_csma(drvr_get_rand() & 0xf, drvr_get_rand() & 0xf, aMinBE, aMacMaxFrameRetries, aMaxCsmaBackoffs);
// set the default channel
drvr_set_channel(11);
// set autocrc mode
drvr_set_auto_crc(true);
// start the contiki driver process and register the event number
process_start(&drvr_process, NULL);
event_drvr_conf = process_alloc_event();
// put trx in rx auto ack mode
drvr_set_trx_state(RX_AACK_ON);
while (drvr_get_trx_state() != RX_AACK_ON);
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(serial_line_process, ev, data)
{
static char buf[BUFSIZE];
static int ptr;
PROCESS_BEGIN();
serial_line_event_message = process_alloc_event();
ptr = 0;
while(1) {
/* Fill application buffer until newline or empty */
int c = ringbuf_get(&rxbuf);
if(c == -1) {
/* Buffer empty, wait for poll */
PROCESS_YIELD();
} else {
if(c != END) {
if(ptr < BUFSIZE-1) {
buf[ptr++] = (uint8_t)c;
} else {
/* Ignore character (wait for EOL) */
}
} else {
/* Terminate */
buf[ptr++] = (uint8_t)'\0';
/* Broadcast event */
process_post(PROCESS_BROADCAST, serial_line_event_message, buf);
/* Wait until all processes have handled the serial line event */
if(PROCESS_ERR_OK ==
process_post(PROCESS_CURRENT(), PROCESS_EVENT_CONTINUE, NULL)) {
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_CONTINUE);
}
ptr = 0;
}
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
void
shell_init(void)
{
list_init(commands);
shell_register_command(&help_command);
shell_register_command(&question_command);
shell_register_command(&killall_command);
shell_register_command(&kill_command);
shell_register_command(&null_command);
shell_register_command(&exit_command);
shell_register_command(&quit_command);
shell_event_input = process_alloc_event();
process_start(&shell_process, NULL);
process_start(&shell_server_process, NULL);
front_process = &shell_process;
}
// callback for receiving files
static void files_recv(struct broadcast_conn *c, const rimeaddr_t *from)
{
process_exit(&timerout_proc);
// storing file received
uint8_t file_recv = *(uint8_t *)packetbuf_dataptr();
state = 2;
//printf("state 2");
// debugging
printf("%d", file_recv);
// allocating event
files_ready = process_alloc_event();
// sending event and file number received to recv_files process
process_post(&recv_files, files_ready, &file_recv);
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(sensors_process, ev, data)
{
static int i;
static int events;
PROCESS_BEGIN();
sensors_event = process_alloc_event();
for(i = 0; sensors[i] != NULL; ++i)
{
sensors_flags[i] = 0;
sensors[i]->configure(SENSORS_HW_INIT, 0);
}
num_sensors = i;
while(1)
{
PROCESS_WAIT_EVENT();
do
{
events = 0;
for(i = 0; i < num_sensors; ++i)
{
if(sensors_flags[i] & FLAG_CHANGED)
{
if(process_post(PROCESS_BROADCAST, sensors_event, (void *)sensors[i]) == PROCESS_ERR_OK)
{
PROCESS_WAIT_EVENT_UNTIL(ev == sensors_event);
}
sensors_flags[i] &= ~FLAG_CHANGED;
events++;
}
}
}
while(events);
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(sensors_process, ev, data)
{
static int i;
static int events;
PROCESS_BEGIN();
for(i = 0; sensors[i] != NULL; ++i) {
sensors_flags[i] = 0;
sensors[i]->init();
}
num_sensors = i;
sensors_event = process_alloc_event();
irq_init();
while(1) {
PROCESS_WAIT_EVENT();
do {
events = 0;
for(i = 0; i < num_sensors; ++i) {
if(sensors_flags[i] & FLAG_CHANGED) {
/* if(sensors_selecting_proc[i] == SELCOLL
|| sensors_selecting_proc[i] == NULL)
process_post(PROCESS_BROADCAST, sensors_event, sensors[i]);
else
process_post(sensors_selecting_proc[i], sensors_event, sensors[i]);*/
if(process_post(PROCESS_BROADCAST, sensors_event, sensors[i]) == PROCESS_ERR_OK) {
PROCESS_WAIT_EVENT_UNTIL(ev == sensors_event);
}
sensors_flags[i] &= ~FLAG_CHANGED;
events++;
}
}
} while(events);
}
PROCESS_END();
}
/*
* Initialize the various elements in the MAC layer. Reset the protocol
* control block, start the mac process, init the events, and set the mac
* info base to its default values.
*/
void mac_init()
{
mac_queue_init();
mac_indir_init();
mac_scan_init();
/*
* Set up the processes. First start the mac process,
* then allocate the rx event
*/
process_start(&mac_process, NULL);
event_mac_rx = process_alloc_event();
/* init the pcb */
memset(&pcb, 0, sizeof(mac_pcb_t));
/* init the mac pib */
memset(&pib, 0, sizeof(mac_pib_t));
pib.ack_wait_duration = aMacAckWaitDuration;
pib.resp_wait_time = aMacResponseWaitTime;
pib.coord_addr.mode = SHORT_ADDR;
pib.coord_addr.short_addr = 0xFFFF;
pib.short_addr = 0xFFFF;
pib.pan_id = 0xFFFF;
pib.rx_on_when_idle = true;
pib.assoc_permit = true;
pib.max_csma_backoffs = 3;
pib.min_be = 3;
pib.dsn = (U8)drvr_get_rand();
#if (TEST_SIM == 1)
pib.ext_addr = getpid();
#else
pib.ext_addr = drvr_get_rand();
#endif
/* set these in the hardware */
drvr_set_pan_id(pib.pan_id);
drvr_set_short_addr(pib.short_addr);
drvr_set_ext_addr(pib.ext_addr);
}
/**
* \brief Init function for the User button.
* \param type SENSORS_ACTIVE: Activate / Deactivate the sensor (value == 1
* or 0 respectively)
*
* \param value Depends on the value of the type argument
* \return Depends on the value of the type argument
*/
static int
config_user(int type, int value)
{
switch(type) {
case SENSORS_HW_INIT:
button_press_duration_exceeded = process_alloc_event();
/* Software controlled */
GPIO_SOFTWARE_CONTROL(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
/* Set pin to input */
GPIO_SET_INPUT(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
/* Enable edge detection */
GPIO_DETECT_EDGE(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
/* Both Edges */
GPIO_TRIGGER_BOTH_EDGES(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
ioc_set_over(BUTTON_USER_PORT, BUTTON_USER_PIN, IOC_OVERRIDE_PUE);
gpio_register_callback(btn_callback, BUTTON_USER_PORT, BUTTON_USER_PIN);
break;
case SENSORS_ACTIVE:
if(value) {
GPIO_ENABLE_INTERRUPT(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
nvic_interrupt_enable(BUTTON_USER_VECTOR);
} else {
GPIO_DISABLE_INTERRUPT(BUTTON_USER_PORT_BASE, BUTTON_USER_PIN_MASK);
nvic_interrupt_disable(BUTTON_USER_VECTOR);
}
return value;
case BUTTON_SENSOR_CONFIG_TYPE_INTERVAL:
press_duration = (clock_time_t)value;
break;
default:
break;
}
return 1;
}
void
ieee_init()
{
void *mac;
MAC_Pib_s *pib;
if (process_is_running(&ieee_process))
return;
/* initialize ieee_eventhandler and event queue*/
rxq_init();
/* setup mac <-> app interface */
u32AppApiInit((PR_GET_BUFFER) rxq_mlme_alloc, (PR_POST_CALLBACK) ieee_process_poll, NULL,
(PR_GET_BUFFER) rxq_mcps_alloc, (PR_POST_CALLBACK) ieee_process_poll, NULL);
/* get mac and pib handles */
mac = pvAppApiGetMacHandle();
pib = MAC_psPibGetHandle(mac);
/* do a full reset */
req_reset(true);
/* set panid and default parameters */
MAC_vPibSetPanId(mac, IEEE802154_PANDID);
MAC_vPibSetRxOnWhenIdle(mac, true, false);
/* allocate an event for this process */
ieee_event = process_alloc_event();
pib->bAutoRequest = true;
/* bandwidth control, smaller interframe gap and higher data rate,
* this is not standard conform! */
#if defined(__BA2__) && defined(JENNIC_CONF_JN5148_FASTDATARATE)
vAHI_BbcSetHigherDataRate(E_AHI_BBC_CTRL_DATA_RATE_1_MBPS);
vAHI_BbcSetInterFrameGap(48);
#endif
process_start(&ieee_process, NULL);
}
void mac_init()
{
mac_queue_init();
mac_indir_init();
mac_scan_init();
// Set up the processes.
// First start the mac process, then allocate the rx event
process_start(&mac_process, NULL);
event_mac_rx = process_alloc_event();
// init the pcb
memset(&pcb, 0, sizeof(mac_pcb_t));
// init the mac pib
memset(&pib, 0, sizeof(mac_pib_t));
pib.ack_wait_duration = aMacAckWaitDuration;
pib.resp_wait_time = aMacResponseWaitTime;
pib.coord_addr.mode = SHORT_ADDR;
pib.coord_addr.short_addr = 0xFFFF;
pib.short_addr = 0xFFFF;
pib.pan_id = 0xFFFF;
pib.rx_on_when_idle = true;
pib.assoc_permit = true;
pib.max_csma_backoffs = 3;
pib.min_be = 3;
pib.dsn = (U8)drvr_get_rand();
#if (TEST_SIM == 1)
//lint -e{732} Info 732: Loss of sign (assignment) (int to unsigned long long)
pib.ext_addr = getpid();
#else
pib.ext_addr = drvr_get_rand();
#endif
// set these in the hardware
drvr_set_pan_id(pib.pan_id);
drvr_set_short_addr(pib.short_addr);
drvr_set_ext_addr(pib.ext_addr);
}
PROCESS_THREAD(led_on, ev, data)
{
static struct etimer etmr;
WDTE=0xac;
PROCESS_BEGIN();
etimer_set(&etmr, CLOCK_CONF_SECOND);
event_led_on = process_alloc_event();
while(1)
{
PROCESS_WAIT_EVENT_UNTIL(ev==PROCESS_EVENT_TIMER);
// offled = (~offled);
// BELL = 0;
process_post(&led_off, event_led_on, NULL);
etimer_reset(&etmr);
}
PROCESS_END();
}
// callback for receiving Ns
static void client_recv(struct broadcast_conn *c, const rimeaddr_t *from)
{
start_time = clock_time();
state = 1;
// flag for receiving Ns initially
if (flag==1) {
// storing Ns from packet
uint8_t ns_recv = *(uint8_t *)packetbuf_dataptr();
// for debugging purposes
printf("*");
printf("Ns received from %d.%d: '%d'\n",
from->u8[0], from->u8[1], ns_recv);
// allocating event
ns_ready = process_alloc_event();
// send event and Ns to client_broadcast
process_post(&client_broadcast, ns_ready, &ns_recv);
}
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(serial_line_process, ev, data)
{
PROCESS_BEGIN();
bufwptr = 0;
buffer_full = 0;
serial_line_event_message = process_alloc_event();
while(1) {
PROCESS_YIELD();
if(buffer_full) {
memcpy(appbuffer, buffer, bufwptr);
process_post(PROCESS_BROADCAST, serial_line_event_message, appbuffer);
bufwptr = 0;
buffer_full = 0;
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------*/
PROCESS_THREAD(codeprop_process, ev, data)
{
PROCESS_BEGIN();
s.id = 0/*random_rand()*/;
send_time = CLOCK_SECOND/4;
PT_INIT(&s.udpthread_pt);
PT_INIT(&s.recv_udpthread_pt);
tcp_listen(HTONS(CODEPROP_DATA_PORT));
udp_conn = udp_broadcast_new(HTONS(CODEPROP_DATA_PORT), NULL);
codeprop_event_quit = process_alloc_event();
s.state = STATE_NONE;
s.received = 0;
s.addr = 0;
s.len = 0;
while(1) {
PROCESS_YIELD();
if(ev == EVENT_START_PROGRAM) {
/* First kill old program. */
elfloader_unload();
elfloader_load(EEPROMFS_ADDR_CODEPROP);
} else if(ev == tcpip_event) {
uipcall(data);
} else if(ev == PROCESS_EVENT_TIMER) {
tcpip_poll_udp(udp_conn);
}
}
PROCESS_END();
}
PROCESS_THREAD(accel_process, ev, data) {
PROCESS_BEGIN();
{
int16_t x, y, z;
serial_shell_init();
shell_ps_init();
shell_file_init(); // for printing out files
shell_text_init(); // for binprint
/* Register the event used for lighting up an LED when interrupt strikes. */
ledOff_event = process_alloc_event();
/* Start and setup the accelerometer with default values, eg no interrupts enabled. */
accm_init();
/* Register the callback functions for each interrupt */
ACCM_REGISTER_INT1_CB(accm_ff_cb);
ACCM_REGISTER_INT2_CB(accm_tap_cb);
/* Set what strikes the corresponding interrupts. Several interrupts per pin is
possible. For the eight possible interrupts, see adxl345.h and adxl345 datasheet. */
accm_set_irq(ADXL345_INT_FREEFALL, ADXL345_INT_TAP + ADXL345_INT_DOUBLETAP);
while (1) {
x = accm_read_axis(X_AXIS);
y = accm_read_axis(Y_AXIS);
z = accm_read_axis(Z_AXIS);
printf("x: %d y: %d z: %d\n", x, y, z);
etimer_set(&et, ACCM_READ_INTERVAL);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
}
}
PROCESS_END();
}
PROCESS_THREAD(proc_epoch_syncer, ev, data) {
static struct etimer send_timer;
static struct etimer epoch_timer;
static const struct broadcast_callbacks broadcast_cbs = {__broadcast_recv_cb, __broadcast_sent_cb};
static struct broadcast_conn conn;
PROCESS_EXITHANDLER(broadcast_close(&conn));
PROCESS_BEGIN();
#ifdef TRACK_CONNECTIONS
/* Log the node id */
printf("board-id64 0x%.16llx\n", board_get_id64());
#endif
#ifdef XFER_CRC16
/* Log the node id */
printf("xfer crc16\n");
#endif
printf("epoch interval %ld ticks\n", EPOCH_INTERVAL);
/*
* Alloc the two syncer events
*/
evt_epoch_synced = process_alloc_event();
evt_end_of_epoch = process_alloc_event();
/*
* Open a `connection` on the syncer broadcasting channel
*/
broadcast_open(&conn, BROADCAST_CHANNEL_TIMESYNC, &broadcast_cbs);
/*
* init the epoch-syncer instance
*/
epoch_syncer_init(&__epoch_syncer);
/*
* This is the main syncer loop. Initially we try to sync the
* epoch between nodes without concurrently running any other
* algo. After a period, at which time the network is synced,
* we start generating epoch events which can be
* consumed by, e.g., the estimator process.
*/
etimer_set(&epoch_timer, __epoch_syncer.epoch_interval);
__epoch_syncer.epoch_start_time = clock_time();
__epoch_syncer.epoch_end_time = etimer_expiration_time(&epoch_timer);
while (1) {
/*
* The start of a new epoch !
*/
epoch_syncer_at_epoch_start(&__epoch_syncer);
clock_time_t now;
clock_time_t time_to_epoch_end;
now = clock_time();
assert(__epoch_syncer.epoch_end_time == etimer_expiration_time(&epoch_timer));
assert(__epoch_syncer.epoch_end_time > now);
time_to_epoch_end = __epoch_syncer.epoch_end_time - now;
/*
* Setup a random wait time before sending the sync packet
*
* ! we cannot let send_timer delay the epoch_timer, especially
* when the next `end-of-epoch-time` has been anticipated by a lot
* (this can happen at startup)
*/
if (time_to_epoch_end > __epoch_syncer.epoch_sync_start) {
long int send_wait;
long int send_wait_rnd;
long int rnd;
rnd = rand();
send_wait_rnd = (unsigned)rnd % (unsigned) __epoch_syncer.epoch_sync_xfer_interval;
send_wait = __epoch_syncer.epoch_sync_start + send_wait_rnd;
assert(send_wait >= __epoch_syncer.epoch_sync_start);
assert(send_wait <= __epoch_syncer.epoch_sync_start + __epoch_syncer.epoch_sync_xfer_interval);
if (send_wait > time_to_epoch_end)
send_wait = __epoch_syncer.epoch_sync_start;
assert(send_wait < time_to_epoch_end);
etimer_set(&send_timer, send_wait);
PROCESS_WAIT_UNTIL(etimer_expired(&send_timer));
/*
* Acquire the radio lock
*
* ! we don't use WAIT/YIELD_UNTIL() because
* 1) we do not want to yield if we can acquire the lock on the first try
* 2) no kernel signal is generated when the lock is released (we would `deadlock')
*/
do {
if (!radio_trylock())
break;
PROCESS_PAUSE();
} while (1);
{
clock_time_t now;
struct epoch_sync_packet packet;
/*
* broadcast the sync packet
*
* ! We put this part into its own block since non static stack
* variables/allocations in the parent block wouldn't get preserved trough
* kernel calls (e.g. the PROCESS_PAUSE() a few lines above)
*/
#ifdef TRACK_CONNECTIONS
packet.board_id16 = board_get_id16();
#endif
packet.epoch = __epoch_syncer.epoch;
now = clock_time();
assert(now > __epoch_syncer.epoch_start_time);
assert(__epoch_syncer.epoch_end_time > now);
packet.time_from_epoch_start = now - __epoch_syncer.epoch_start_time;
packet.time_to_epoch_end = __epoch_syncer.epoch_end_time - now;
#ifdef XFER_CRC16
/*
* Compute the packet crc with the .crc16 field zeroed
*/
{
uint16_t crc16;
packet.crc16 = 0;
crc16 = crc16_data((const unsigned char *)&packet, sizeof(struct epoch_sync_packet), 0);
packet.crc16 = crc16;
}
#endif
packetbuf_copyfrom(&packet, sizeof(struct epoch_sync_packet));
broadcast_send(&conn);
}
} else {
printf("epoch-syncer: skipping sync send\n");
}
/*
* We cannot YIELD here: if epoch_timer has already expired there won't be
* any event to wake us up.
*
* FIXME: if we get here and the epoch timer has fired
* already print by how much we are late: this can be terribly useful
* to trace bugs in the epoch sync code or the kernel.
*/
if (etimer_expired(&epoch_timer)) {
long int now;
now = clock_time();
assert(now > __epoch_syncer.epoch_end_time);
} else {
char do_wait;
do_wait = 1;
if (__epoch_syncer.sum_sync_offsets) {
long int avg_offset = __epoch_syncer.sum_sync_offsets / __epoch_syncer.nr_offsets;
const long int threshold = CLOCK_SECOND;
if (avg_offset > threshold) {
/*
* if we are late don't wait until the timer expires
* ! this migth give us the opportunity to re-enter the right sync_xfer_interval
*/
do_wait = 0;
} else if (avg_offset < -threshold) {
/*
* we are too fast, delay end of epoch
*/
clock_time_t now;
clock_time_t time_to_epoch_end;
now = clock_time();
assert(__epoch_syncer.epoch_end_time == etimer_expiration_time(&epoch_timer));
assert(__epoch_syncer.epoch_end_time > now);
time_to_epoch_end = __epoch_syncer.epoch_end_time - now;
long int delay = time_to_epoch_end + (-avg_offset/2);
static struct etimer delay_timer;
trace("epoch-syncer: delaying end-of-epoch by %ld ticks\n", (-avg_offset/2));
etimer_set(&delay_timer, delay);
__epoch_syncer.epoch_end_time += (-avg_offset/2);
PROCESS_WAIT_UNTIL(etimer_expired(&delay_timer));
}
}
if (do_wait) {
PROCESS_WAIT_UNTIL(etimer_expired(&epoch_timer));
} else {
trace("epoch-syncer: not waiting for end-of-epoch\n");
}
}
trace("epoch-syncer: epoch %d ended\n", __epoch_syncer.epoch);
#ifdef TRACK_CONNECTIONS
connection_print_and_zero(CONNECTION_TRACK_SYNC, __epoch_syncer.epoch);
#endif
/*
* Re-Set the end-of-epoch timer
*/
if (__epoch_syncer.epoch == EPOCHS_UNTIL_SYNCED) {
/*
* We have hopefully achieved sync at this point
*
* 1) update the epoch timings, and set the epoch timer
*
* 2) signal the size-estimator process that the epoch is now synced
*/
__epoch_syncer.epoch_interval = EPOCH_INTERVAL;
__epoch_syncer.epoch_sync_start = EPOCH_SYNC_START;
__epoch_syncer.epoch_sync_xfer_interval = EPOCH_SYNC_XFER_INTERVAL;
etimer_stop(&epoch_timer);
etimer_set(&epoch_timer, __epoch_syncer.epoch_interval);
/*
* The epoch timer has been re-set: update the time until the next epoch end
* Increase the epoch count.
* ! these operations must happen in a block which cannot block in kernel calls
*/
__epoch_syncer.epoch_start_time = clock_time();
__epoch_syncer.epoch_end_time = etimer_expiration_time(&epoch_timer);
__epoch_syncer.epoch++;
process_post(&proc_size_estimator, evt_epoch_synced, NULL);
} else {
/*
* Re-set and adjust the epoch timer using the data received trough sync packets
* (in this epoch)
*
* ! using re-set (instead of, e.g., restart) is important here in order to avoid
* drifting
*/
etimer_reset(&epoch_timer);
/*
* The epoch timer has been re-set: update the time until the next epoch end
* Increase the epoch count.
* ! these operations must happen in a block which cannot block in kernel calls
*/
//__epoch_syncer.epoch_start_time = epoch_timer.timer.start;
__epoch_syncer.epoch_start_time = clock_time();
__epoch_syncer.epoch_end_time = etimer_expiration_time(&epoch_timer);
__epoch_syncer.epoch++;
if (__epoch_syncer.sum_sync_offsets) {
long int avg_offset = __epoch_syncer.sum_sync_offsets / __epoch_syncer.nr_offsets;
const long int threshold = 1;//(CLOCK_SECOND/32);//*3;
#if __CONTIKI_NETSTACK_RDC==__CONTIKI_NETSTACK_RDC_NULL
const int tx_delay = 0;
#elif __CONTIKI_NETSTACK_RDC==__CONTIKI_NETSTACK_RDC_CXMAC
/*
* When the cxmac RDC is used we must consider an added delay due to the fact that when
* other nodes radios are turned off the sync packet must be re-sent.
*/
const int tx_delay = 8;
#endif
/*
* estimate the avg tx delay
*/
avg_offset += tx_delay;
trace("epoch-syncer: sync offsets %d ~ %ld < %ld < %ld\n", __epoch_syncer.nr_offsets, __epoch_syncer.min_offset + tx_delay, avg_offset, __epoch_syncer.max_offset+tx_delay);
if ((avg_offset < -threshold) || (avg_offset > threshold)) {
clock_time_t new_expiration_time;
const long int adjust_threshold = CLOCK_SECOND/2;
long int adjust;
/*
* feedback control the next expiration time
*/
adjust = -avg_offset/2;
adjust = min(adjust, adjust_threshold);
adjust = max(adjust, -adjust_threshold);
if (adjust)
etimer_adjust(&epoch_timer, adjust);
new_expiration_time = etimer_expiration_time(&epoch_timer);
__epoch_syncer.epoch_end_time = new_expiration_time;
}
}
if (__epoch_syncer.epoch > EPOCHS_UNTIL_SYNCED) {
/*
* Signal the estimator-process that this epoch has ended
*/
process_post(&proc_size_estimator, evt_end_of_epoch, NULL);
}
}
}
PROCESS_END();
}
/* this process handle the reception of messages */
PROCESS_THREAD(delugeGroupP, ev, data)
{
int fd;
char* buf;
uint8_t nr_pages_local;
static struct etimer et;
static struct jsonparse_state jsonState;
static ContainerRoot * newModel;
static uip_ipaddr_t addr;
PROCESS_BEGIN();
/* keep track of the singleton instance */
instance = (DelugeGroup*)data;
/* register new event types */
NEW_AVAILABLE_OA_MODEL = process_alloc_event();
NEW_OA_MODEL_DOWNLOADED = process_alloc_event();
/* initialize model announcement's system */
simple_udp_register(&deluge_group_broadcast, 34555, NULL, 34555, model_version_recv);
/* set announcement's initial value*/
instance->info.version = 0;
instance->info.nr_pages = 0;
/* set timer for announcements */
etimer_set(&et, CLOCK_SECOND * instance->interval);
while (1) {
/* Listen for announcements every interval seconds. */
PROCESS_WAIT_EVENT();
if (ev == PROCESS_EVENT_TIMER) {
/* announce my model */
uip_create_linklocal_allnodes_mcast(&addr);
simple_udp_sendto(&deluge_group_broadcast, &instance->info, sizeof(struct ModelInfo), &addr);
etimer_restart(&et);
}
else if (ev == NEW_AVAILABLE_OA_MODEL){
/* receive the new over the air model */
/* contains the number of pages */
nr_pages_local = instance->info.nr_pages;
/* create the file with the required number of pages */
cfs_remove(instance->fileNameWithModel);
fd = cfs_open(instance->fileNameWithModel, CFS_WRITE);
buf = (char*) malloc(S_PAGE);
memset(buf, '0' , S_PAGE);
PRINTF("Number of pages is %d\n", nr_pages_local);
while(nr_pages_local) {
cfs_seek(fd, 0, CFS_SEEK_END);
cfs_write(fd, buf, S_PAGE);
nr_pages_local--;
}
free(buf);
cfs_close(fd);
/* Deluge-based dissemination */
if (deluge_disseminate(instance->fileNameWithModel, 0, modelDownloaded)) {
PRINTF("ERROR: some problem waiting for new version of the file\n");
}
else {
PRINTF("INFO: Waiting for new version of the file \n");
}
}
else if (ev == NEW_OA_MODEL_DOWNLOADED) {
/* deserialize the model received over the air */
PRINTF("New model %s received in group with instance %p\n", instance->fileNameWithModel, instance);
newModel = NULL;
/* TODO: check if the file exists */
/* parse model from json file */
jsonparse_setup(&jsonState, instance->fileNameWithModel);
newModel = JSONKevDeserializer(&jsonState, jsonparse_next(&jsonState));
cfs_close(jsonState.fd);
PRINTF("INFO: Deserialization finished in Deluge Group %p\n", newModel);
/* save a reference to the new model */
instance->lastReceivedModel = newModel;
/* Afterwards, just call notifyNewModel */
if (newModel != NULL && notifyNewModel(newModel) == PROCESS_ERR_OK) {
PRINTF("INFO: Model was successfully sent\n");
}
else {
PRINTF("ERROR: The model cannot be loaded!\n");
}
}
}
PROCESS_END();
}
process_event_t wismo218_command_event;
static wismo218_status_t WismoStatus;
static arnGsmRemoteCommand_t* CurrentCommand;
PROCESS(commandmanager_process, "CommandManager");
//AUTOSTART_PROCESSES(&commandmanager_process);
PROCESS_THREAD(commandmanager_process, ev, data)
{
PROCESS_EXITHANDLER(goto exit);
PROCESS_BEGIN();
wismo218_command_event = process_alloc_event();
WismoStatus = init_none;
printf("CommandManager started.\n\r");
while(1) {
PROCESS_WAIT_EVENT();
if (ev == serial_line_event_message) {
if (data != NULL) {
char* Dt = data;
char* CommandParameters;
CurrentCommand = arnCommand(Dt);
//printf("%s:%s\n\r",__FUNCTION__,Dt);
if ((WismoStatus == init_done) && CurrentCommand) {
char* pres;
CommandParameters = arnCommandParameters(CurrentCommand,Dt);
if (CurrentCommand->Command_handler) {
PROCESS_THREAD(cetic_6lbr_process, ev, data)
{
static struct etimer timer;
static int addr_number;
PROCESS_BEGIN();
/* Step 0: Basic infrastructure initialization */
LOG6LBR_NOTICE("Starting 6LBR version " CETIC_6LBR_VERSION " (" CONTIKI_VERSION_STRING ")\n");
//Turn off radio until 6LBR is properly configured
NETSTACK_MAC.off(0);
cetic_6lbr_restart_event = process_alloc_event();
cetic_6lbr_reload_event = process_alloc_event();
cetic_6lbr_startup = clock_seconds();
#if CETIC_6LBR_MULTI_RADIO
network_itf_init();
#endif
/* Step 1: Platform specific initialization */
platform_init();
/* Step 2: Register configuration hooks and set default configuration */
#if CETIC_6LBR_NODE_INFO
node_info_config();
#endif
/* Step 3: Load configuration from NVM and configuration file */
platform_load_config(CONFIG_LEVEL_BOOT);
#if !LOG6LBR_STATIC
if(nvm_data.log_level != 0xFF) {
Log6lbr_level = nvm_data.log_level;
Log6lbr_services = nvm_data.log_services;
}
LOG6LBR_NOTICE("Log level: %d (services: %x)\n", Log6lbr_level, Log6lbr_services);
#else
LOG6LBR_NOTICE("Log level: %d (services: %x)\n", LOG6LBR_LEVEL, LOG6LBR_SERVICE_DEFAULT);
#endif
/* Step 4: Initialize radio and network interfaces */
#if CETIC_6LBR_FRAMER_WRAPPER
framer_wrapper_init();
#endif
#if CETIC_6LBR_MAC_WRAPPER
mac_wrapper_init();
#endif
#if CETIC_6LBR_MULTI_RADIO
CETIC_6LBR_MULTI_RADIO_DEFAULT_MAC.init();
#endif
#if !CETIC_6LBR_ONE_ITF
platform_radio_init();
while(!radio_ready) {
PROCESS_PAUSE();
}
#endif
eth_drv_init();
while(!ethernet_ready) {
PROCESS_PAUSE();
}
//Turn on radio and keep it always on
NETSTACK_MAC.off(1);
/* Step 5: Initialize Network stack */
#if CETIC_6LBR_LLSEC_WRAPPER
#if CETIC_6LBR_WITH_ADAPTIVESEC
llsec_strategy_wrapper_init();
#endif
llsec_wrapper_init();
#endif
#if CETIC_6LBR_MULTICAST_WRAPPER
multicast_wrapper_init();
#endif
//6LoWPAN init
memcpy(addr_contexts[0].prefix, nvm_data.wsn_6lowpan_context_0, sizeof(addr_contexts[0].prefix));
//clean up any early packet
uip_len = 0;
process_start(&tcpip_process, NULL);
PROCESS_PAUSE();
/* Step 6: Configure network interfaces */
packet_filter_init();
cetic_6lbr_init();
//Wait result of DAD on 6LBR addresses
addr_number = uip_ds6_get_addr_number(-1);
LOG6LBR_INFO("Checking addresses duplication\n");
etimer_set(&timer, CLOCK_SECOND);
while(uip_ds6_get_addr_number(ADDR_TENTATIVE) > 0) {
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_TIMER);
etimer_set(&timer, CLOCK_SECOND);
}
//Can not use equality as autoconf address could be created when running DAD
if(uip_ds6_get_addr_number(-1) < addr_number) {
LOG6LBR_FATAL("Addresses duplication failed\n");
cetic_6lbr_restart_type = CETIC_6LBR_RESTART;
platform_restart();
}
/* Step 7: Finalize configuration of network interfaces */
cetic_6lbr_init_finalize();
/* Step 8: Initialize 6LBR core and base applications */
platform_load_config(CONFIG_LEVEL_CORE);
PROCESS_PAUSE();
#if CETIC_6LBR_WITH_WEBSERVER
webserver_init();
#endif
#if CETIC_6LBR_NODE_INFO
node_info_init();
#endif
#if CETIC_6LBR_NODE_CONFIG
node_config_init();
#endif
/* Step 9: Initialize and configure 6LBR applications */
platform_load_config(CONFIG_LEVEL_BASE);
PROCESS_PAUSE();
#if CETIC_6LBR_WITH_UDPSERVER
udp_server_init();
#endif
#if UDPCLIENT
process_start(&udp_client_process, NULL);
#endif
#if WITH_TINYDTLS
dtls_init();
#endif
#if WITH_COAPSERVER
if((nvm_data.global_flags & CETIC_GLOBAL_DISABLE_COAP_SERVER) == 0) {
coap_server_init();
}
#endif
#if WITH_DTLS_ECHO
process_start(&dtls_echo_server_process, NULL);
#endif
#if CETIC_6LBR_WITH_NVM_PROXY
nvm_proxy_init();
#endif
#if CETIC_6LBR_WITH_DNS_PROXY
dns_proxy_init();
#endif
/* Step 10: Finalize platform configuration and load runtime configuration */
platform_finalize();
platform_load_config(CONFIG_LEVEL_APP);
LOG6LBR_INFO("CETIC 6LBR Started\n");
PROCESS_WAIT_EVENT_UNTIL(ev == cetic_6lbr_restart_event);
etimer_set(&timer, CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_TIMER);
/* Shutdown 6LBR */
//Turn off radio
NETSTACK_MAC.off(0);
platform_restart();
PROCESS_END();
}
SOL_API struct sol_spi *
sol_spi_open(unsigned int bus, const struct sol_spi_config *config)
{
struct sol_spi *spi;
qm_spi_t max_bus_available;
int ret;
SOL_LOG_INTERNAL_INIT_ONCE;
/* QM_SPI_NUM is always considering that both master and the slave
* exist, so we can't use it to check the valid buses to use */
#if QUARK_SE
max_bus_available = QM_SPI_MST_1;
#else
max_bus_available = QM_SPI_MST_0;
#endif
SOL_EXP_CHECK(bus >= max_bus_available, NULL);
SOL_NULL_CHECK(config, NULL);
#ifndef SOL_NO_API_VERSION
if (unlikely(config->api_version != SOL_SPI_CONFIG_API_VERSION)) {
SOL_WRN("Couldn't open SPI that has unsupported version '%u', "
"expected version is '%u'",
config->api_version, SOL_SPI_CONFIG_API_VERSION);
return NULL;
}
#endif
if (config->chip_select > 3) {
SOL_WRN("Invalid chip_select value '%u'. Value must be between 0 and 3.",
config->chip_select);
return NULL;
}
if ((config->bits_per_word < 4) || (config->bits_per_word > 32)) {
SOL_WRN("Invalid bits_per_word value '%" PRIu8 "'. Value must be "
"between 4 and 32.", config->bits_per_word);
return NULL;
}
spi = calloc(1, sizeof(*spi));
SOL_NULL_CHECK(spi, NULL);
if (!spi_irq_event) {
bool r;
spi_irq_event = process_alloc_event();
r = sol_mainloop_contiki_event_handler_add(&spi_irq_event, NULL,
spi_cb_dispatch, NULL);
SOL_EXP_CHECK_GOTO(!r, error);
}
spi->bus = bus;
spi->slave = BIT(config->chip_select);
spi->config.frame_size = config->bits_per_word - 1;
spi->config.transfer_mode = QM_SPI_TMOD_TX_RX;
spi->config.bus_mode = config->mode;
spi->config.clk_divider = 32000000 / config->frequency;
switch (spi->bus) {
case QM_SPI_MST_0:
clk_periph_enable(CLK_PERIPH_CLK | CLK_PERIPH_SPI_M0_REGISTER);
qm_irq_request(QM_IRQ_SPI_MASTER_0, qm_spi_master_0_isr);
break;
#if QUARK_SE
case QM_SPI_MST_1:
qm_irq_request(QM_IRQ_SPI_MASTER_1, qm_spi_master_1_isr);
break;
#endif
case QM_SPI_SLV_0:
case QM_SPI_NUM:
/* We checked if we were passed the limit before, so we should never
* hit this point. Using all the enum values and no default, however,
* allows us to rely on the compiler to know if there are values
* we are not considering (depending on warning levels) */
break;
}
ret = spi_set_gpio_ss(spi);
SOL_INT_CHECK_GOTO(ret, < 0, error);
return spi;
error:
free(spi);
return NULL;
}
int init_knot_network(){
KNOT_EVENT_SERVICE_FOUND = process_alloc_event();
KNOT_EVENT_DATA_READY = process_alloc_event();
init_link_layer();
return 1;
}
SOL_API struct sol_i2c *
sol_i2c_open_raw(uint8_t bus, enum sol_i2c_speed speed)
{
struct sol_i2c *i2c;
qm_i2c_config_t cfg;
qm_i2c_speed_t bus_speed;
qm_rc_t ret;
if (bus >= QM_I2C_NUM) {
SOL_WRN("I2C bus #%" PRIu8 " doesn't exist.", bus);
return NULL;
}
if ((i2c = buses[bus]) != NULL)
return i2c;
switch (speed) {
case SOL_I2C_SPEED_10KBIT:
case SOL_I2C_SPEED_100KBIT:
bus_speed = QM_I2C_SPEED_STD;
break;
case SOL_I2C_SPEED_400KBIT:
bus_speed = QM_I2C_SPEED_FAST;
break;
case SOL_I2C_SPEED_1MBIT:
case SOL_I2C_SPEED_3MBIT_400KBIT:
bus_speed = QM_I2C_SPEED_FAST_PLUS;
break;
default:
SOL_WRN("Unsupported speed value: %d", speed);
return NULL;
};
switch (bus) {
case QM_I2C_0:
qm_irq_request(QM_IRQ_I2C_0, qm_i2c_0_isr);
clk_periph_enable(CLK_PERIPH_CLK | CLK_PERIPH_I2C_M0_REGISTER);
break;
#if QUARK_SE
case QM_I2C_1:
qm_irq_request(QM_IRQ_I2C_1, qm_i2c_1_isr);
clk_periph_enable(CLK_PERIPH_CLK | CLK_PERIPH_I2C_M1_REGISTER);
break;
#endif
case QM_I2C_NUM:
/* We checked if we were passed the limit before, so we should never
* hit this point. Using all the enum values and no default, however,
* allows us to rely on the compiler to know if there are values
* we are not considering (depending on warning levels) */
break;
}
i2c = calloc(1, sizeof(*i2c));
SOL_NULL_CHECK(i2c, NULL);
i2c->bus = bus;
ret = qm_i2c_get_config(i2c->bus, &cfg);
SOL_EXP_CHECK_GOTO(ret != QM_RC_OK, error);
cfg.speed = bus_speed;
cfg.address_mode = QM_I2C_7_BIT;
cfg.mode = QM_I2C_MASTER;
cfg.slave_addr = 0;
ret = qm_i2c_set_config(i2c->bus, &cfg);
SOL_EXP_CHECK_GOTO(ret != QM_RC_OK, error);
if (!i2c_irq_event) {
bool r;
i2c_irq_event = process_alloc_event();
r = sol_mainloop_contiki_event_handler_add(&i2c_irq_event, NULL,
i2c_cb_dispatch, NULL);
SOL_EXP_CHECK_GOTO(!r, error);
}
buses[i2c->bus] = i2c;
return i2c;
error:
free(i2c);
return NULL;
}
PROCESS_THREAD(cetic_6lbr_process, ev, data)
{
PROCESS_BEGIN();
cetic_6lbr_restart_event = process_alloc_event();
cetic_6lbr_startup = clock_seconds();
#if CONTIKI_TARGET_NATIVE
slip_config_handle_arguments(contiki_argc, contiki_argv);
if (watchdog_interval) {
process_start(&native_6lbr_watchdog, NULL);
} else {
LOG6LBR_WARN("6LBR Watchdog disabled\n");
}
#endif
LOG6LBR_INFO("Starting 6LBR version " CETIC_6LBR_VERSION " (" CONTIKI_VERSION_STRING ")\n");
load_nvm_config();
platform_init();
process_start(ð_drv_process, NULL);
while(!ethernet_ready) {
PROCESS_PAUSE();
}
//clean up any early packet
uip_len = 0;
process_start(&tcpip_process, NULL);
PROCESS_PAUSE();
#if CETIC_NODE_INFO
node_info_init();
#endif
packet_filter_init();
cetic_6lbr_init();
#if WEBSERVER
process_start(&webserver_nogui_process, NULL);
#endif
#if UDPSERVER
process_start(&udp_server_process, NULL);
#endif
#if UDPCLIENT
process_start(&udp_client_process, NULL);
#endif
#if WITH_COAP
process_start(&coap_server_process, NULL);
#endif
#if WITH_NVM_PROXY
nvm_proxy_init();
#endif
#if CONTIKI_TARGET_NATIVE
plugins_load();
#endif
LOG6LBR_INFO("CETIC 6LBR Started\n");
PROCESS_WAIT_EVENT_UNTIL(ev == cetic_6lbr_restart_event);
etimer_set(&reboot_timer, CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(ev == PROCESS_EVENT_TIMER);
#if CONTIKI_TARGET_NATIVE
switch (cetic_6lbr_restart_type) {
case CETIC_6LBR_RESTART:
LOG6LBR_INFO("Exiting...\n");
exit(0);
break;
case CETIC_6LBR_REBOOT:
LOG6LBR_INFO("Rebooting...\n");
system("reboot");
break;
case CETIC_6LBR_HALT:
LOG6LBR_INFO("Halting...\n");
system("halt");
break;
default:
//We should never end up here...
exit(1);
}
//We should never end up here...
exit(1);
#else
LOG6LBR_INFO("Rebooting...\n");
watchdog_reboot();
#endif
PROCESS_END();
}
