static void netduino2_init(MachineState *machine)
{
DeviceState *dev;
dev = qdev_create(NULL, TYPE_STM32F205_SOC);
if (machine->kernel_filename) {
qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename);
}
qdev_prop_set_string(dev, "cpu-model", "cortex-m3");
object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal);
}
static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *busdev;
SSIBus *spi;
int i;
dev = qdev_create(NULL, "xilinx,spips");
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, base_addr);
sysbus_connect_irq(busdev, 0, irq);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; ++i) {
qemu_irq cs_line;
dev = ssi_create_slave_no_init(spi, "m25p80");
qdev_prop_set_string(dev, "partname", "n25q128");
qdev_init_nofail(dev);
cs_line = qdev_get_gpio_in(dev, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
/* Open code a private version of pflash registration since we
* need to set non-default device width for VExpress platform.
*/
static pflash_t *ve_pflash_cfi01_register(hwaddr base, const char *name,
DriveInfo *di)
{
DeviceState *dev = qdev_create(NULL, "cfi.pflash01");
if (di && qdev_prop_set_drive(dev, "drive", di->bdrv)) {
abort();
}
qdev_prop_set_uint32(dev, "num-blocks",
VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE);
qdev_prop_set_uint64(dev, "sector-length", VEXPRESS_FLASH_SECT_SIZE);
qdev_prop_set_uint8(dev, "width", 4);
qdev_prop_set_uint8(dev, "device-width", 2);
qdev_prop_set_uint8(dev, "big-endian", 0);
qdev_prop_set_uint16(dev, "id0", 0x89);
qdev_prop_set_uint16(dev, "id1", 0x18);
qdev_prop_set_uint16(dev, "id2", 0x00);
qdev_prop_set_uint16(dev, "id3", 0x00);
qdev_prop_set_string(dev, "name", name);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
return OBJECT_CHECK(pflash_t, (dev), "cfi.pflash01");
}
void s390_init_ipl_dev(const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *firmware)
{
DeviceState *dev;
dev = qdev_create(NULL, "s390-ipl");
if (kernel_filename) {
qdev_prop_set_string(dev, "kernel", kernel_filename);
}
if (initrd_filename) {
qdev_prop_set_string(dev, "initrd", initrd_filename);
}
qdev_prop_set_string(dev, "cmdline", kernel_cmdline);
qdev_prop_set_string(dev, "firmware", firmware);
qdev_init_nofail(dev);
}
DeviceState *goldfish_battery_create(GoldfishBus *gbus)
{
DeviceState *dev;
char *name = (char *)"goldfish-battery";
dev = qdev_create(&gbus->bus, name);
qdev_prop_set_string(dev, "name", name);
qdev_init_nofail(dev);
return dev;
}
static void nrf51_soc_init(Object *obj)
{
NRF51State *s = NRF51_SOC(obj);
memory_region_init(&s->container, obj, "nrf51-container", UINT64_MAX);
sysbus_init_child_obj(OBJECT(s), "armv6m", OBJECT(&s->cpu), sizeof(s->cpu),
TYPE_ARMV7M);
qdev_prop_set_string(DEVICE(&s->cpu), "cpu-type",
ARM_CPU_TYPE_NAME("cortex-m0"));
qdev_prop_set_uint32(DEVICE(&s->cpu), "num-irq", 32);
}
void s390_init_ipl_dev(const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *firmware,
bool enforce_bios)
{
DeviceState *dev;
dev = qdev_create(NULL, "s390-ipl");
if (kernel_filename) {
qdev_prop_set_string(dev, "kernel", kernel_filename);
}
if (initrd_filename) {
qdev_prop_set_string(dev, "initrd", initrd_filename);
}
qdev_prop_set_string(dev, "cmdline", kernel_cmdline);
qdev_prop_set_string(dev, "firmware", firmware);
qdev_prop_set_bit(dev, "enforce_bios", enforce_bios);
object_property_add_child(qdev_get_machine(), "s390-ipl",
OBJECT(dev), NULL);
qdev_init_nofail(dev);
}
static DeviceState *goldfish_device_bus_create(GoldfishBus *gbus, uint32_t base, uint32_t irq)
{
DeviceState *dev;
char *name = (char *)"goldfish_device_bus";
dev = qdev_create(&gbus->bus, name);
qdev_prop_set_string(dev, "name", name);
qdev_prop_set_uint32(dev, "base", base);
qdev_prop_set_uint32(dev, "irq", irq);
qdev_init_nofail(dev);
return dev;
}
static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
void *opaque,
const char *name, hwaddr size)
{
/* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE,
* and return a pointer to its MemoryRegion.
*/
UnimplementedDeviceState *uds = opaque;
sysbus_init_child_obj(OBJECT(mms), name, uds,
sizeof(UnimplementedDeviceState),
TYPE_UNIMPLEMENTED_DEVICE);
qdev_prop_set_string(DEVICE(uds), "name", name);
qdev_prop_set_uint64(DEVICE(uds), "size", size);
object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal);
return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0);
}
DeviceState *goldfish_int_create(GoldfishBus *gbus, uint32_t base, qemu_irq parent_irq, qemu_irq parent_fiq)
{
DeviceState *dev;
GoldfishDevice *gdev;
GoldfishInterruptDevice *idev;
char *name = (char *)"goldfish_int";
dev = qdev_create(&gbus->bus, name);
qdev_prop_set_string(dev, "name", name);
qdev_prop_set_uint32(dev, "base", base);
qdev_init_nofail(dev);
gdev = (GoldfishDevice *)dev;
idev = DO_UPCAST(GoldfishInterruptDevice, dev, gdev);
idev->parent_irq = parent_irq;
idev->parent_fiq = parent_fiq;
return dev;
}
static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
bool is_qspi)
{
DeviceState *dev;
SysBusDevice *busdev;
SSIBus *spi;
DeviceState *flash_dev;
int i, j;
int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1;
int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES;
dev = qdev_create(NULL, "xilinx,spips");
qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1);
qdev_prop_set_uint8(dev, "num-ss-bits", num_ss);
qdev_prop_set_uint8(dev, "num-busses", num_busses);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, base_addr);
if (is_qspi) {
sysbus_mmio_map(busdev, 1, 0xFC000000);
}
sysbus_connect_irq(busdev, 0, irq);
for (i = 0; i < num_busses; ++i) {
char bus_name[16];
qemu_irq cs_line;
snprintf(bus_name, 16, "spi%d", i);
spi = (SSIBus *)qdev_get_child_bus(dev, bus_name);
for (j = 0; j < num_ss; ++j) {
flash_dev = ssi_create_slave_no_init(spi, "m25p80");
qdev_prop_set_string(flash_dev, "partname", "n25q128");
qdev_init_nofail(flash_dev);
cs_line = qdev_get_gpio_in(flash_dev, 0);
sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line);
}
}
}
static pflash_t *xtfpga_flash_init(MemoryRegion *address_space,
const LxBoardDesc *board,
DriveInfo *dinfo, int be)
{
SysBusDevice *s;
DeviceState *dev = qdev_create(NULL, "cfi.pflash01");
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
&error_abort);
qdev_prop_set_uint32(dev, "num-blocks",
board->flash_size / board->flash_sector_size);
qdev_prop_set_uint64(dev, "sector-length", board->flash_sector_size);
qdev_prop_set_uint8(dev, "width", 4);
qdev_prop_set_bit(dev, "big-endian", be);
qdev_prop_set_string(dev, "name", "lx60.io.flash");
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
memory_region_add_subregion(address_space, board->flash_base,
sysbus_mmio_get_region(s, 0));
return OBJECT_CHECK(pflash_t, (dev), "cfi.pflash01");
}
static void mps2_common_init(MachineState *machine)
{
MPS2MachineState *mms = MPS2_MACHINE(machine);
MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine);
MemoryRegion *system_memory = get_system_memory();
MachineClass *mc = MACHINE_GET_CLASS(machine);
DeviceState *armv7m, *sccdev;
if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
error_report("This board can only be used with CPU %s",
mc->default_cpu_type);
exit(1);
}
/* The FPGA images have an odd combination of different RAMs,
* because in hardware they are different implementations and
* connected to different buses, giving varying performance/size
* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
* call the 16MB our "system memory", as it's the largest lump.
*
* Common to both boards:
* 0x21000000..0x21ffffff : PSRAM (16MB)
* AN385 only:
* 0x00000000 .. 0x003fffff : ZBT SSRAM1
* 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
* 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
* 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3
* 0x01000000 .. 0x01003fff : block RAM (16K)
* 0x01004000 .. 0x01007fff : mirror of above
* 0x01008000 .. 0x0100bfff : mirror of above
* 0x0100c000 .. 0x0100ffff : mirror of above
* AN511 only:
* 0x00000000 .. 0x0003ffff : FPGA block RAM
* 0x00400000 .. 0x007fffff : ZBT SSRAM1
* 0x20000000 .. 0x2001ffff : SRAM
* 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
*
* The AN385 has a feature where the lowest 16K can be mapped
* either to the bottom of the ZBT SSRAM1 or to the block RAM.
* This is of no use for QEMU so we don't implement it (as if
* zbt_boot_ctrl is always zero).
*/
memory_region_allocate_system_memory(&mms->psram,
NULL, "mps.ram", 0x1000000);
memory_region_add_subregion(system_memory, 0x21000000, &mms->psram);
switch (mmc->fpga_type) {
case FPGA_AN385:
make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
&mms->ssram23, 0x20400000);
make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000);
make_ram_alias(&mms->blockram_m1, "mps.blockram_m1",
&mms->blockram, 0x01004000);
make_ram_alias(&mms->blockram_m2, "mps.blockram_m2",
&mms->blockram, 0x01008000);
make_ram_alias(&mms->blockram_m3, "mps.blockram_m3",
&mms->blockram, 0x0100c000);
break;
case FPGA_AN511:
make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000);
make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000);
make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000);
break;
default:
g_assert_not_reached();
}
sysbus_init_child_obj(OBJECT(mms), "armv7m", &mms->armv7m,
sizeof(mms->armv7m), TYPE_ARMV7M);
armv7m = DEVICE(&mms->armv7m);
switch (mmc->fpga_type) {
case FPGA_AN385:
qdev_prop_set_uint32(armv7m, "num-irq", 32);
break;
case FPGA_AN511:
qdev_prop_set_uint32(armv7m, "num-irq", 64);
break;
default:
g_assert_not_reached();
}
qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory),
"memory", &error_abort);
object_property_set_bool(OBJECT(&mms->armv7m), true, "realized",
&error_fatal);
create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000);
create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000);
create_unimplemented_device("Block RAM", 0x01000000, 0x00010000);
create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000);
create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000);
create_unimplemented_device("PSRAM", 0x21000000, 0x01000000);
/* These three ranges all cover multiple devices; we may implement
* some of them below (in which case the real device takes precedence
* over the unimplemented-region mapping).
*/
create_unimplemented_device("CMSDK APB peripheral region @0x40000000",
0x40000000, 0x00010000);
create_unimplemented_device("CMSDK peripheral region @0x40010000",
0x40010000, 0x00010000);
create_unimplemented_device("Extra peripheral region @0x40020000",
0x40020000, 0x00010000);
create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000);
create_unimplemented_device("VGA", 0x41000000, 0x0200000);
switch (mmc->fpga_type) {
case FPGA_AN385:
{
/* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
* Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
*/
Object *orgate;
DeviceState *orgate_dev;
int i;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, 6, "num-lines", &error_fatal);
object_property_set_bool(orgate, true, "realized", &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x40006000, 0x40007000,
0x40009000};
/* RX irq number; TX irq is always one greater */
static const int uartirq[] = {0, 2, 4, 18, 20};
qemu_irq txovrint = NULL, rxovrint = NULL;
if (i < 3) {
txovrint = qdev_get_gpio_in(orgate_dev, i * 2);
rxovrint = qdev_get_gpio_in(orgate_dev, i * 2 + 1);
}
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(armv7m, uartirq[i] + 1),
qdev_get_gpio_in(armv7m, uartirq[i]),
txovrint, rxovrint,
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
case FPGA_AN511:
{
/* The overflow IRQs for all UARTs are ORed together.
* Tx and Rx IRQs for each UART are ORed together.
*/
Object *orgate;
DeviceState *orgate_dev;
int i;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, 10, "num-lines", &error_fatal);
object_property_set_bool(orgate, true, "realized", &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
/* system irq numbers for the combined tx/rx for each UART */
static const int uart_txrx_irqno[] = {0, 2, 45, 46, 56};
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x4002c000, 0x4002d000,
0x4002e000};
Object *txrx_orgate;
DeviceState *txrx_orgate_dev;
txrx_orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(txrx_orgate, 2, "num-lines", &error_fatal);
object_property_set_bool(txrx_orgate, true, "realized",
&error_fatal);
txrx_orgate_dev = DEVICE(txrx_orgate);
qdev_connect_gpio_out(txrx_orgate_dev, 0,
qdev_get_gpio_in(armv7m, uart_txrx_irqno[i]));
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(txrx_orgate_dev, 0),
qdev_get_gpio_in(txrx_orgate_dev, 1),
qdev_get_gpio_in(orgate_dev, i * 2),
qdev_get_gpio_in(orgate_dev, i * 2 + 1),
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
default:
g_assert_not_reached();
}
cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ);
cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ);
sysbus_init_child_obj(OBJECT(mms), "dualtimer", &mms->dualtimer,
sizeof(mms->dualtimer), TYPE_CMSDK_APB_DUALTIMER);
qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
object_property_set_bool(OBJECT(&mms->dualtimer), true, "realized",
&error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
qdev_get_gpio_in(armv7m, 10));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000);
sysbus_init_child_obj(OBJECT(mms), "scc", &mms->scc,
sizeof(mms->scc), TYPE_MPS2_SCC);
sccdev = DEVICE(&mms->scc);
qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2);
qdev_prop_set_uint32(sccdev, "scc-aid", 0x00200008);
qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id);
object_property_set_bool(OBJECT(&mms->scc), true, "realized",
&error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000);
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
lan9118_init(&nd_table[0], 0x40200000,
qdev_get_gpio_in(armv7m,
mmc->fpga_type == FPGA_AN385 ? 13 : 47));
system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
0x400000);
}
static void zynq_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
A9MPPrivState *mpcore;
ObjectClass *cpu_oc;
ARMCPU *cpu[MAX_CPUS];
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq pic[64];
Error *err = NULL;
int n;
if (machine->cpu_model) {
error_report("Zynq does not support CPU model override!\n");
exit(1);
}
if (!cpu_model) {
cpu_model = "cortex-a9";
}
cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
for (n = 0; n < smp_cpus; n++) {
cpu[n] = ARM_CPU(object_new(object_class_get_name(cpu_oc)));
/* By default A9 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
* realization.
*/
if (object_property_find(OBJECT(cpu[n]), "has_el3", NULL)) {
object_property_set_bool(OBJECT(cpu[n]), false, "has_el3", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
object_property_set_int(OBJECT(cpu[n]), ZYNQ_BOARD_MIDR, "midr", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
object_property_set_int(OBJECT(cpu[n]), MPCORE_PERIPHBASE,
"reset-cbar", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
object_property_set_bool(OBJECT(cpu[n]), true, "realized", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
/* max 2GB ram */
if (ram_size > 0x80000000) {
ram_size = 0x80000000;
}
/* pl353 */
dev = qdev_create(NULL, "arm.pl35x");
/* FIXME: handle this somewhere central */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
"pl353", OBJECT(dev), NULL);
qdev_prop_set_uint8(dev, "x", 3);
{
DriveInfo *dinfo = drive_get_next(IF_PFLASH);
BlockBackend *blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
DeviceState *att_dev = qdev_create(NULL, "cfi.pflash02");
Error *errp = NULL;
if (blk && qdev_prop_set_drive(att_dev, "drive", blk)) {
abort();
}
qdev_prop_set_uint32(att_dev, "num-blocks",
FLASH_SIZE/FLASH_SECTOR_SIZE);
qdev_prop_set_uint32(att_dev, "sector-length", FLASH_SECTOR_SIZE);
qdev_prop_set_uint8(att_dev, "width", 1);
qdev_prop_set_uint8(att_dev, "mappings", 1);
qdev_prop_set_uint8(att_dev, "big-endian", 0);
qdev_prop_set_uint16(att_dev, "id0", 0x0066);
qdev_prop_set_uint16(att_dev, "id1", 0x0022);
qdev_prop_set_uint16(att_dev, "id2", 0x0000);
qdev_prop_set_uint16(att_dev, "id3", 0x0000);
qdev_prop_set_uint16(att_dev, "unlock-addr0", 0x0aaa);
qdev_prop_set_uint16(att_dev, "unlock-addr1", 0x0555);
qdev_prop_set_string(att_dev, "name", "pl353.pflash");
qdev_init_nofail(att_dev);
object_property_set_link(OBJECT(dev), OBJECT(att_dev), "dev0", &errp);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
dinfo = drive_get_next(IF_PFLASH);
att_dev = nand_init(dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
NAND_MFR_STMICRO, 0xaa);
object_property_set_link(OBJECT(dev), OBJECT(att_dev), "dev1", &errp);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xe000e000);
sysbus_mmio_map(busdev, 1, 0xe2000000);
sysbus_mmio_map(busdev, 2, 0xe1000000);
/* DDR remapped to address zero. */
memory_region_allocate_system_memory(ext_ram, NULL, "zynq.ext_ram",
ram_size);
memory_region_add_subregion(address_space_mem, 0, ext_ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10,
&error_abort);
vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, OCM_BASE, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
FLASH_SECTOR_SIZE,
FLASH_SIZE/FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
dev = qdev_create(NULL, "xilinx,zynq_slcr");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
for (n = 0; n < smp_cpus; n++) {
qdev_connect_gpio_out(dev, n,
qdev_get_gpio_in(DEVICE(cpu[n]), 0));
}
mpcore = A9MPCORE_PRIV(object_new("a9mpcore_priv"));
qdev_prop_set_uint32(DEVICE(mpcore), "num-cpu", smp_cpus);
object_property_set_bool(OBJECT(mpcore), true, "realized", &err);
if (err != NULL) {
error_report("Couldn't realize the Zynq A9MPCore: %s",
error_get_pretty(err));
exit(1);
}
busdev = SYS_BUS_DEVICE(DEVICE(mpcore));
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n,
qdev_get_gpio_in(DEVICE(cpu[n]), ARM_CPU_IRQ));
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
zynq_init_zc70x_i2c(0xE0004000, pic[57-IRQ_OFFSET]);
zynq_init_zc70x_i2c(0xE0005000, pic[80-IRQ_OFFSET]);
dev = qdev_create(NULL, "xlnx,ps7-usb");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xE0002000);
sysbus_connect_irq(busdev, 0, pic[53-IRQ_OFFSET]);
dev = qdev_create(NULL, "xlnx,ps7-usb");
busdev = SYS_BUS_DEVICE(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0xE0003000);
sysbus_connect_irq(busdev, 0, pic[76-IRQ_OFFSET]);
zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]);
gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]);
dev = qdev_create(NULL, "pl330");
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
qdev_prop_set_uint8(dev, "num_events", 16);
qdev_prop_set_uint8(dev, "data_width", 64);
qdev_prop_set_uint8(dev, "wr_cap", 8);
qdev_prop_set_uint8(dev, "wr_q_dep", 16);
qdev_prop_set_uint8(dev, "rd_cap", 8);
qdev_prop_set_uint8(dev, "rd_q_dep", 16);
qdev_prop_set_uint16(dev, "data_buffer_dep", 256);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xF8003000);
sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
for (n = 0; n < 8; ++n) { /* event irqs */
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
dev = qdev_create(NULL, "xlnx.ps7-dev-cfg");
object_property_add_child(qdev_get_machine(), "xilinx-devcfg", OBJECT(dev),
NULL);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, pic[40-IRQ_OFFSET]);
sysbus_mmio_map(busdev, 0, 0xF8007000);
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
zynq_binfo.initrd_filename = initrd_filename;
zynq_binfo.nb_cpus = smp_cpus;
zynq_binfo.write_secondary_boot = zynq_write_secondary_boot;
zynq_binfo.secondary_cpu_reset_hook = zynq_reset_secondary;
zynq_binfo.smp_loader_start = SMP_BOOT_ADDR;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
arm_load_kernel(ARM_CPU(first_cpu), &zynq_binfo);
}
/* PowerPC PREP hardware initialisation */
static void ppc_prep_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
const char *boot_device = machine->boot_order;
MemoryRegion *sysmem = get_system_memory();
PowerPCCPU *cpu = NULL;
CPUPPCState *env = NULL;
nvram_t nvram;
M48t59State *m48t59;
#if 0
MemoryRegion *xcsr = g_new(MemoryRegion, 1);
#endif
int linux_boot, i, nb_nics1;
MemoryRegion *ram = g_new(MemoryRegion, 1);
uint32_t kernel_base, initrd_base;
long kernel_size, initrd_size;
DeviceState *dev;
PCIHostState *pcihost;
PCIBus *pci_bus;
PCIDevice *pci;
ISABus *isa_bus;
ISADevice *isa;
qemu_irq *cpu_exit_irq;
int ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
sysctrl = g_malloc0(sizeof(sysctrl_t));
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
cpu_model = "602";
for (i = 0; i < smp_cpus; i++) {
cpu = cpu_ppc_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
env = &cpu->env;
if (env->flags & POWERPC_FLAG_RTC_CLK) {
/* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */
cpu_ppc_tb_init(env, 7812500UL);
} else {
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
}
qemu_register_reset(ppc_prep_reset, cpu);
}
/* allocate RAM */
memory_region_allocate_system_memory(ram, NULL, "ppc_prep.ram", ram_size);
memory_region_add_subregion(sysmem, 0, ram);
if (linux_boot) {
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image_targphys(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw_error("qemu: could not load initial ram disk '%s'\n",
initrd_filename);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* For now, OHW cannot boot from the network. */
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for Mac99 machine\n");
exit(1);
}
}
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
hw_error("Only 6xx bus is supported on PREP machine\n");
}
dev = qdev_create(NULL, "raven-pcihost");
if (bios_name == NULL) {
bios_name = BIOS_FILENAME;
}
qdev_prop_set_string(dev, "bios-name", bios_name);
qdev_prop_set_uint32(dev, "elf-machine", ELF_MACHINE);
pcihost = PCI_HOST_BRIDGE(dev);
object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL);
qdev_init_nofail(dev);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (pci_bus == NULL) {
fprintf(stderr, "Couldn't create PCI host controller.\n");
exit(1);
}
sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0);
/* PCI -> ISA bridge */
pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378");
cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
cpu = POWERPC_CPU(first_cpu);
qdev_connect_gpio_out(&pci->qdev, 0,
cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
qdev_connect_gpio_out(&pci->qdev, 1, *cpu_exit_irq);
sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9));
sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11));
sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9));
sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11));
isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci), "isa.0"));
/* Super I/O (parallel + serial ports) */
isa = isa_create(isa_bus, TYPE_PC87312);
dev = DEVICE(isa);
qdev_prop_set_uint8(dev, "config", 13); /* fdc, ser0, ser1, par0 */
qdev_init_nofail(dev);
/* init basic PC hardware */
pci_vga_init(pci_bus);
nb_nics1 = nb_nics;
if (nb_nics1 > NE2000_NB_MAX)
nb_nics1 = NE2000_NB_MAX;
for(i = 0; i < nb_nics1; i++) {
if (nd_table[i].model == NULL) {
nd_table[i].model = g_strdup("ne2k_isa");
}
if (strcmp(nd_table[i].model, "ne2k_isa") == 0) {
isa_ne2000_init(isa_bus, ne2000_io[i], ne2000_irq[i],
&nd_table[i]);
} else {
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
}
}
ide_drive_get(hd, ARRAY_SIZE(hd));
for(i = 0; i < MAX_IDE_BUS; i++) {
isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i],
hd[2 * i],
hd[2 * i + 1]);
}
isa_create_simple(isa_bus, "i8042");
cpu = POWERPC_CPU(first_cpu);
sysctrl->reset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET];
portio_list_init(&prep_port_list, NULL, prep_portio_list, sysctrl, "prep");
portio_list_add(&prep_port_list, isa_address_space_io(isa), 0x0);
/* PowerPC control and status register group */
#if 0
memory_region_init_io(xcsr, NULL, &PPC_XCSR_ops, NULL, "ppc-xcsr", 0x1000);
memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
#endif
if (usb_enabled(false)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59);
if (m48t59 == NULL)
return;
sysctrl->nvram = m48t59;
/* Initialise NVRAM */
nvram.opaque = m48t59;
nvram.read_fn = &m48t59_read;
nvram.write_fn = &m48t59_write;
PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "PREP", ram_size, ppc_boot_device,
kernel_base, kernel_size,
kernel_cmdline,
initrd_base, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth);
}
static void
petalogix_ml605_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
CPUMBState *env;
DriveInfo *dinfo;
int i;
hwaddr ddr_base = MEMORY_BASEADDR;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32], *cpu_irq;
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "microblaze";
}
cpu = cpu_mb_init(cpu_model);
env = &cpu->env;
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, "petalogix_ml605.lmb_bram",
LMB_BRAM_SIZE);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, "petalogix_ml605.ram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, ddr_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
cpu_irq = microblaze_pic_init_cpu(env);
dev = xilinx_intc_create(INTC_BASEADDR, cpu_irq[0], 4);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
irq[5], 115200, serial_hds[0], DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
xilinx_timer_create(TIMER_BASEADDR, irq[2], 0, 100 * 1000000);
/* axi ethernet and dma initialization. */
dma = qdev_create(NULL, "xlnx.axi-dma");
/* FIXME: attach to the sysbus instead */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
"xilinx-dma", OBJECT(dma), NULL);
eth0 = xilinx_axiethernet_create(&nd_table[0], STREAM_SLAVE(dma),
0x82780000, irq[3], 0x1000, 0x1000);
xilinx_axiethernetdma_init(dma, STREAM_SLAVE(eth0),
0x84600000, irq[1], irq[0], 100 * 1000000);
{
SSIBus *spi;
dev = qdev_create(NULL, "xlnx.xps-spi");
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0x40a00000);
sysbus_connect_irq(busdev, 0, irq[4]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; i++) {
qemu_irq cs_line;
dev = ssi_create_slave_no_init(spi, "m25p80");
qdev_prop_set_string(dev, "partname", "n25q128");
qdev_init_nofail(dev);
cs_line = qdev_get_gpio_in(dev, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
microblaze_load_kernel(cpu, ddr_base, ram_size, BINARY_DEVICE_TREE_FILE,
machine_cpu_reset);
}
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
{
MSF2State *s = MSF2_SOC(dev_soc);
DeviceState *dev, *armv7m;
SysBusDevice *busdev;
Error *err = NULL;
int i;
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *nvm = g_new(MemoryRegion, 1);
MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size,
&error_fatal);
/*
* On power-on, the eNVM region 0x60000000 is automatically
* remapped to the Cortex-M3 processor executable region
* start address (0x0). We do not support remapping other eNVM,
* eSRAM and DDR regions by guest(via Sysreg) currently.
*/
memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM",
nvm, 0, s->envm_size);
memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
memory_region_add_subregion(system_memory, 0, nvm_alias);
memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
&error_fatal);
memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
armv7m = DEVICE(&s->armv7m);
qdev_prop_set_uint32(armv7m, "num-irq", 81);
qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()),
"memory", &error_abort);
object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
if (!s->m3clk) {
error_setg(errp, "Invalid m3clk value");
error_append_hint(errp, "m3clk can not be zero\n");
return;
}
qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,
qemu_allocate_irq(&do_sys_reset, NULL, 0));
system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;
for (i = 0; i < MSF2_NUM_UARTS; i++) {
if (serial_hd(i)) {
serial_mm_init(get_system_memory(), uart_addr[i], 2,
qdev_get_gpio_in(armv7m, uart_irq[i]),
115200, serial_hd(i), DEVICE_NATIVE_ENDIAN);
}
}
dev = DEVICE(&s->timer);
/* APB0 clock is the timer input clock */
qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(armv7m, timer_irq[0]));
sysbus_connect_irq(busdev, 1,
qdev_get_gpio_in(armv7m, timer_irq[1]));
dev = DEVICE(&s->sysreg);
qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div);
qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div);
object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);
for (i = 0; i < MSF2_NUM_SPIS; i++) {
gchar *bus_name;
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(armv7m, spi_irq[i]));
/* Alias controller SPI bus to the SoC itself */
bus_name = g_strdup_printf("spi%d", i);
object_property_add_alias(OBJECT(s), bus_name,
OBJECT(&s->spi[i]), "spi",
&error_abort);
g_free(bus_name);
}
/* Below devices are not modelled yet. */
create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
create_unimplemented_device("dma", 0x40003000, 0x1000);
create_unimplemented_device("watchdog", 0x40005000, 0x1000);
create_unimplemented_device("i2c_1", 0x40012000, 0x1000);
create_unimplemented_device("gpio", 0x40013000, 0x1000);
create_unimplemented_device("hs-dma", 0x40014000, 0x1000);
create_unimplemented_device("can", 0x40015000, 0x1000);
create_unimplemented_device("rtc", 0x40017000, 0x1000);
create_unimplemented_device("apb_config", 0x40020000, 0x10000);
create_unimplemented_device("emac", 0x40041000, 0x1000);
create_unimplemented_device("usb", 0x40043000, 0x1000);
}