コード例 #1
0
ファイル: ini.c プロジェクト: Jubei-Mitsuyoshi/aaa-compiz
static void
updateSetting (CCSBackend *backend, CCSContext *context, CCSPlugin *plugin, CCSSetting *setting)
{
    if (readInit (backend, context))
    {
	readSetting (backend, context, setting);
	readDone (backend, context);
    }
}
コード例 #2
0
ファイル: ReadKkit.cpp プロジェクト: csiki/MOOSE
void ReadKkit::innerRead( ifstream& fin )
{
	string line;
	string temp;
	lineNum_ = 0;
	string::size_type pos;
	bool clearLine = 1;
	ParseMode parseMode = INIT;

	while ( getline( fin, temp ) ) {
		lineNum_++;
		if ( clearLine )
			line = "";
                temp = trim(temp);
		if ( temp.length() == 0 )
				continue;
		pos = temp.find_last_not_of( "\t " );
		if ( pos == string::npos ) { 
			// Nothing new in line, go with what was left earlier, 
			// and clear out line for the next cycle.
			temp = "";
			clearLine = 1;
		} else {
			if ( temp[pos] == '\\' ) {
				temp[pos] = ' ';
				line.append( temp );
				clearLine = 0;
				continue;
			} else {
				line.append( temp );
				clearLine = 1;
			}
		}
			
		pos = line.find_first_not_of( "\t " );
		if ( pos == string::npos )
				continue;
		else
			line = line.substr( pos );
		if ( line.substr( 0, 2 ) == "//" )
				continue;
		if ( (pos = line.find("//")) != string::npos ) 
			line = line.substr( 0, pos );
		if ( line.substr( 0, 2 ) == "/*" ) {
				parseMode = COMMENT;
				line = line.substr( 2 );
		}

		if ( parseMode == COMMENT ) {
			pos = line.find( "*/" );
			if ( pos != string::npos ) {
				parseMode = DATA;
				if ( line.length() > pos + 2 )
					line = line.substr( pos + 2 );
			}
		}

		if ( parseMode == DATA )
				readData( line );
		else if ( parseMode == INIT ) {
				parseMode = readInit( line );
		}
	}
	
	/*
	cout << " innerRead: " <<
			lineNum_ << " lines read, " << 
			numCompartments_ << " compartments, " << 
			numPools_ << " molecules, " << 
			numReacs_ << " reacs, " << 
			numEnz_ << " enzs, " << 
			numMMenz_ << " MM enzs, " << 
			numOthers_ << " others," <<
			numPlot_ << " plots," <<
			" PlotDt = " << plotdt_ <<
			endl;
			*/
}
コード例 #3
0
ファイル: v4l2grab.c プロジェクト: twam/v4l2grab
/**
	initialize device
*/
static void deviceInit(void)
{
    struct v4l2_capability cap;
    struct v4l2_cropcap cropcap;
    struct v4l2_crop crop;
    struct v4l2_format fmt;
    struct v4l2_streamparm frameint;
    unsigned int min;

    if (-1 == xioctl(fd, VIDIOC_QUERYCAP, &cap)) {
        if (EINVAL == errno) {
            fprintf(stderr, "%s is no V4L2 device\n",deviceName);
            exit(EXIT_FAILURE);
        } else {
            errno_exit("VIDIOC_QUERYCAP");
        }
    }

    if (!(cap.capabilities & V4L2_CAP_VIDEO_CAPTURE)) {
        fprintf(stderr, "%s is no video capture device\n",deviceName);
        exit(EXIT_FAILURE);
    }

    switch (io) {
#ifdef IO_READ
    case IO_METHOD_READ:
        if (!(cap.capabilities & V4L2_CAP_READWRITE)) {
            fprintf(stderr, "%s does not support read i/o\n",deviceName);
            exit(EXIT_FAILURE);
        }
        break;
#endif

#ifdef IO_MMAP
    case IO_METHOD_MMAP:
#endif
#ifdef IO_USERPTR
    case IO_METHOD_USERPTR:
#endif
#if defined(IO_MMAP) || defined(IO_USERPTR)
        if (!(cap.capabilities & V4L2_CAP_STREAMING)) {
            fprintf(stderr, "%s does not support streaming i/o\n",deviceName);
            exit(EXIT_FAILURE);
        }
        break;
#endif
    }

    /* Select video input, video standard and tune here. */
    CLEAR(cropcap);

    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    if (0 == xioctl(fd, VIDIOC_CROPCAP, &cropcap)) {
        crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        crop.c = cropcap.defrect; /* reset to default */

        if (-1 == xioctl(fd, VIDIOC_S_CROP, &crop)) {
            switch (errno) {
            case EINVAL:
                /* Cropping not supported. */
                break;
            default:
                /* Errors ignored. */
                break;
            }
        }
    } else {
        /* Errors ignored. */
    }

    CLEAR(fmt);

    // v4l2_format
    fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    fmt.fmt.pix.width = width;
    fmt.fmt.pix.height = height;
    fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
    fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420;

    if (-1 == xioctl(fd, VIDIOC_S_FMT, &fmt))
        errno_exit("VIDIOC_S_FMT");

    if (fmt.fmt.pix.pixelformat != V4L2_PIX_FMT_YUV420) {
        fprintf(stderr,"Libv4l didn't accept YUV420 format. Can't proceed.\n");
        exit(EXIT_FAILURE);
    }

    /* Note VIDIOC_S_FMT may change width and height. */
    if (width != fmt.fmt.pix.width) {
        width = fmt.fmt.pix.width;
        fprintf(stderr,"Image width set to %i by device %s.\n", width, deviceName);
    }

    if (height != fmt.fmt.pix.height) {
        height = fmt.fmt.pix.height;
        fprintf(stderr,"Image height set to %i by device %s.\n", height, deviceName);
    }

    /* If the user has set the fps to -1, don't try to set the frame interval */
    if (fps != -1)
    {
        CLEAR(frameint);

        /* Attempt to set the frame interval. */
        frameint.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        frameint.parm.capture.timeperframe.numerator = 1;
        frameint.parm.capture.timeperframe.denominator = fps;
        if (-1 == xioctl(fd, VIDIOC_S_PARM, &frameint))
            fprintf(stderr,"Unable to set frame interval.\n");
    }

    /* Buggy driver paranoia. */
    min = fmt.fmt.pix.width * 2;
    if (fmt.fmt.pix.bytesperline < min)
        fmt.fmt.pix.bytesperline = min;
    min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height;
    if (fmt.fmt.pix.sizeimage < min)
        fmt.fmt.pix.sizeimage = min;

    switch (io) {
#ifdef IO_READ
    case IO_METHOD_READ:
        readInit(fmt.fmt.pix.sizeimage);
        break;
#endif

#ifdef IO_MMAP
    case IO_METHOD_MMAP:
        mmapInit();
        break;
#endif

#ifdef IO_USERPTR
    case IO_METHOD_USERPTR:
        userptrInit(fmt.fmt.pix.sizeimage);
        break;
#endif
    }
}