/*
* MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
* OK to have direct references to sparsemem variables in here.
*/
static int
memory_block_action(unsigned long phys_index, unsigned long action)
{
unsigned long start_pfn, start_paddr;
unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
struct page *first_page;
int ret;
first_page = pfn_to_page(phys_index << PFN_SECTION_SHIFT);
switch (action) {
case MEM_ONLINE:
start_pfn = page_to_pfn(first_page);
if (!pages_correctly_reserved(start_pfn, nr_pages))
return -EBUSY;
ret = online_pages(start_pfn, nr_pages);
break;
case MEM_OFFLINE:
start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
ret = remove_memory(start_paddr,
nr_pages << PAGE_SHIFT);
break;
default:
WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: "
"%ld\n", __func__, phys_index, action, action);
ret = -EINVAL;
}
return ret;
}
static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
{
int result;
u64 start = mem_device->start_addr;
u64 len = mem_device->end_addr - start + 1;
unsigned long attr = mem_device->read_write_attribute;
ACPI_FUNCTION_TRACE("acpi_memory_disable_device");
/*
* Ask the VM to offline this memory range.
* Note: Assume that this function returns zero on success
*/
result = remove_memory(start, len, attr);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
return_VALUE(result);
}
/* Power-off and eject the device */
result = acpi_memory_powerdown_device(mem_device);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Device Power Down failed.\n"));
/* Set the status of the device to invalid */
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
mem_device->state = MEMORY_POWER_OFF_STATE;
return result;
}
static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
{
unsigned long block_sz, start_pfn;
int sections_per_block;
int i, nid;
start_pfn = base >> PAGE_SHIFT;
lock_device_hotplug();
if (!pfn_valid(start_pfn))
goto out;
block_sz = pseries_memory_block_size();
sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
nid = memory_add_physaddr_to_nid(base);
for (i = 0; i < sections_per_block; i++) {
remove_memory(nid, base, MIN_MEMORY_BLOCK_SIZE);
base += MIN_MEMORY_BLOCK_SIZE;
}
out:
/* Update memory regions for memory remove */
memblock_remove(base, memblock_size);
unlock_device_hotplug();
return 0;
}
static int dlpar_remove_lmb(struct of_drconf_cell *lmb)
{
struct memory_block *mem_block;
unsigned long block_sz;
int nid, rc;
if (!lmb_is_removable(lmb))
return -EINVAL;
mem_block = lmb_to_memblock(lmb);
if (!mem_block)
return -EINVAL;
rc = device_offline(&mem_block->dev);
put_device(&mem_block->dev);
if (rc)
return rc;
block_sz = pseries_memory_block_size();
nid = memory_add_physaddr_to_nid(lmb->base_addr);
remove_memory(nid, lmb->base_addr, block_sz);
/* Update memory regions for memory remove */
memblock_remove(lmb->base_addr, block_sz);
dlpar_remove_device_tree_lmb(lmb);
return 0;
}
/*
* MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
* OK to have direct references to sparsemem variables in here.
*/
static int
memory_block_action(struct memory_block *mem, unsigned long action)
{
int i;
unsigned long psection;
unsigned long start_pfn, start_paddr;
struct page *first_page;
int ret;
int old_state = mem->state;
psection = mem->phys_index;
first_page = pfn_to_page(psection << PFN_SECTION_SHIFT);
/*
* The probe routines leave the pages reserved, just
* as the bootmem code does. Make sure they're still
* that way.
*/
if (action == MEM_ONLINE) {
for (i = 0; i < PAGES_PER_SECTION; i++) {
if (PageReserved(first_page+i))
continue;
printk(KERN_WARNING "section number %ld page number %d "
"not reserved, was it already online? \n",
psection, i);
return -EBUSY;
}
}
switch (action) {
case MEM_ONLINE:
start_pfn = page_to_pfn(first_page);
ret = online_pages(start_pfn, PAGES_PER_SECTION);
break;
case MEM_OFFLINE:
mem->state = MEM_GOING_OFFLINE;
start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
ret = remove_memory(start_paddr,
PAGES_PER_SECTION << PAGE_SHIFT);
if (ret) {
mem->state = old_state;
break;
}
break;
default:
WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
__func__, mem, action, action);
ret = -EINVAL;
}
return ret;
}
static int dlpar_add_lmb_memory(struct of_drconf_cell *lmb)
{
struct memory_block *mem_block;
unsigned long block_sz;
int nid, rc;
block_sz = memory_block_size_bytes();
/* Find the node id for this address */
nid = memory_add_physaddr_to_nid(lmb->base_addr);
/* Add the memory */
rc = add_memory(nid, lmb->base_addr, block_sz);
if (rc)
return rc;
/* Register this block of memory */
rc = memblock_add(lmb->base_addr, block_sz);
if (rc) {
remove_memory(nid, lmb->base_addr, block_sz);
return rc;
}
mem_block = lmb_to_memblock(lmb);
if (!mem_block) {
remove_memory(nid, lmb->base_addr, block_sz);
return -EINVAL;
}
rc = device_online(&mem_block->dev);
put_device(&mem_block->dev);
if (rc) {
remove_memory(nid, lmb->base_addr, block_sz);
return rc;
}
lmb->flags |= DRCONF_MEM_ASSIGNED;
return 0;
}
/*
* MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
* OK to have direct references to sparsemem variables in here.
*/
static int
memory_block_action(unsigned long phys_index, unsigned long action)
{
int i;
unsigned long start_pfn, start_paddr;
unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
struct page *first_page;
int ret;
first_page = pfn_to_page(phys_index << PFN_SECTION_SHIFT);
/*
* The probe routines leave the pages reserved, just
* as the bootmem code does. Make sure they're still
* that way.
*/
if (action == MEM_ONLINE) {
for (i = 0; i < nr_pages; i++) {
if (page_is_ram(page_to_pfn(first_page+i))) {
if (PageReserved(first_page+i))
continue;
printk(KERN_WARNING
"section number %ld page number"
" %d not reserved, was it "
" already online?\n",
phys_index, i);
return -EBUSY;
}
}
}
switch (action) {
case MEM_ONLINE:
start_pfn = page_to_pfn(first_page);
ret = online_pages(start_pfn, nr_pages);
break;
case MEM_OFFLINE:
start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
ret = remove_memory(start_paddr,
nr_pages << PAGE_SHIFT);
break;
default:
WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: "
"%ld\n", __func__, phys_index, action, action);
ret = -EINVAL;
}
return ret;
}
static int dlpar_add_lmb(struct of_drconf_cell *lmb)
{
unsigned long block_sz;
int nid, rc;
if (lmb->flags & DRCONF_MEM_ASSIGNED)
return -EINVAL;
rc = dlpar_add_device_tree_lmb(lmb);
if (rc) {
pr_err("Couldn't update device tree for drc index %x\n",
lmb->drc_index);
dlpar_release_drc(lmb->drc_index);
return rc;
}
block_sz = memory_block_size_bytes();
/* Find the node id for this address */
nid = memory_add_physaddr_to_nid(lmb->base_addr);
/* Add the memory */
rc = add_memory(nid, lmb->base_addr, block_sz);
if (rc) {
dlpar_remove_device_tree_lmb(lmb);
return rc;
}
rc = dlpar_online_lmb(lmb);
if (rc) {
remove_memory(nid, lmb->base_addr, block_sz);
dlpar_remove_device_tree_lmb(lmb);
} else {
lmb->flags |= DRCONF_MEM_ASSIGNED;
}
return rc;
}
