void ExportDlg::slotExclude()
{
ASSERT_ENGAUGE(listIncluded != 0);
QString curve = listIncluded->currentText();
ASSERT_ENGAUGE(pointSets != 0);
pointSets->exportExclude(curve);
resetLists();
ASSERT_ENGAUGE(listExcluded != 0);
listExcluded->setCurrentItem(listExcluded->findItem(curve));
toggleActions();
updatePreview();
}
void SelectionDialog:: initConnections()
{
// Connect the signals and slots
connect( resetPushButton, SIGNAL( clicked() ), this,
SLOT( resetLists() ) );
connect( clearSelectionPushButton, SIGNAL( clicked() ),
this, SLOT( deleteConstraints() ) );
connect( constraintListView,
SIGNAL( itemRenamed( Q3ListViewItem *, int ) ),
this, SLOT( setRelatives( Q3ListViewItem *, int ) ) );
// The "Get Data" pushbutton is connected to "accept()"
// and "Cancel" is connected to "reject()" in the base
// class, so there's no need to connect those buttons here.
}
void DifferentiateCurvesDialog::apply() {
bool lineColorOrder = !_selectedListBox->findItems(tr("Line Color"), Qt::MatchExactly).empty();
bool pointStyleOrder = !_selectedListBox->findItems(tr("Point Style"), Qt::MatchExactly).empty();
bool lineStyleOrder = !_selectedListBox->findItems(tr("Line Style"), Qt::MatchExactly).empty();
bool lineWidthOrder = !_selectedListBox->findItems(tr("Line Width"), Qt::MatchExactly).empty();
int maxLineWidth = _maxLineWidth->value();
int pointDensity = _pointDensity->currentIndex();
int sequenceNum = 0;
CurveList curveList = _store->getObjects<Curve>();
for (CurveList::iterator curve_iter = curveList.begin(); curve_iter != curveList.end(); ++curve_iter)
{
CurvePtr curve = kst_cast<Curve>(*curve_iter);
curve->writeLock();
if (lineColorOrder) {
curve->setColor(ColorSequence::entry(sequenceNum));
}
if (pointStyleOrder) {
curve->setPointType(sequenceNum % KSTPOINT_MAXTYPE);
curve->setHasPoints(true);
curve->setPointDensity(pointDensity);
}
if (lineStyleOrder) {
curve->setLineStyle(sequenceNum % LINESTYLE_MAXTYPE);
}
if (lineWidthOrder) {
curve->setLineWidth((sequenceNum + 1) % maxLineWidth);
}
curve->registerChange();
curve->unlock();
++sequenceNum;
}
resetLists();
UpdateManager::self()->doUpdates(true);
kstApp->mainWindow()->document()->setChanged(true);
}
packagesPage::packagesPage(QWidget *parent) :
pageBase(parent)
{
Ui_packagesPage::setupUi(this);
pageName = tr("Packages Page");
pageHelpMessage = tr("");
packagesListDirPath = "/install/packages/";
solvingCheckedDeps = false;
connect(resetPushButton, SIGNAL(clicked()), this, SLOT(resetLists()));
connect(packagesListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(updatePackageDescription(int)));
connect(packagesListWidget, SIGNAL(itemChanged(QListWidgetItem*)), this, SLOT(updatePackageDeps(QListWidgetItem*)), Qt::DirectConnection);
connect(reposListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(updatePackageList(int)));
connect(reposListWidget, SIGNAL(itemChanged(QListWidgetItem*)), this, SLOT(updatePackageList(QListWidgetItem*)));
connect(selectNonePushButton, SIGNAL(clicked()), this, SLOT(unsetAllSelection()));
connect(selectAllPushButton, SIGNAL(clicked()), this, SLOT(setAllSelection()));
}
DifferentiateCurvesDialog::DifferentiateCurvesDialog(QWidget *parent)
: QDialog(parent) {
setupUi(this);
if (MainWindow *mw = qobject_cast<MainWindow*>(parent)) {
_store = mw->document()->objectStore();
} else {
// FIXME: we need the object store
qFatal("ERROR: can't construct a DifferentiateCurvesDialog without the object store");
}
resetLists();
connect(_buttonBox->button(QDialogButtonBox::Cancel), SIGNAL(clicked()), this, SLOT(reject()));
connect(_buttonBox->button(QDialogButtonBox::Ok), SIGNAL(clicked()), this, SLOT(OKClicked()));
connect(_buttonBox->button(QDialogButtonBox::Apply), SIGNAL(clicked()), this, SLOT(apply()));
connect(_add, SIGNAL(clicked()), this, SLOT(addButtonClicked()));
connect(_remove, SIGNAL(clicked()), this, SLOT(removeButtonClicked()));
connect(_up, SIGNAL(clicked()), this, SLOT(upButtonClicked()));
connect(_down, SIGNAL(clicked()), this, SLOT(downButtonClicked()));
connect(_availableListBox, SIGNAL(itemSelectionChanged()), this, SLOT(updateButtons()));
connect(_selectedListBox, SIGNAL(itemSelectionChanged()), this, SLOT(updateButtons()));
// TODO Icons required.
// _up->setIcon(QPixmap(":kst_uparrow.png"));
_up->setText("Up");
// _down->setIcon(QPixmap(":kst_downarrow.png"));
_down->setText("Down");
// _add->setIcon(QPixmap(":kst_rightarrow.png"));
_add->setText("Add");
// _remove->setIcon(QPixmap(":kst_leftarrow.png"));
_remove->setText("Remove");
_maxLineWidth->setMaximum(LINEWIDTH_MAX);
}
DifferentiateCurvesDialog::DifferentiateCurvesDialog(QWidget *parent)
: QDialog(parent) {
setupUi(this);
if (MainWindow *mw = qobject_cast<MainWindow*>(parent)) {
_store = mw->document()->objectStore();
} else {
// FIXME: we need the object store
qFatal("ERROR: can't construct a DifferentiateCurvesDialog without the object store");
}
resetLists();
connect(_buttonBox->button(QDialogButtonBox::Cancel), SIGNAL(clicked()), this, SLOT(reject()));
connect(_buttonBox->button(QDialogButtonBox::Ok), SIGNAL(clicked()), this, SLOT(OKClicked()));
connect(_buttonBox->button(QDialogButtonBox::Apply), SIGNAL(clicked()), this, SLOT(apply()));
connect(_add, SIGNAL(clicked()), this, SLOT(addButtonClicked()));
connect(_remove, SIGNAL(clicked()), this, SLOT(removeButtonClicked()));
connect(_up, SIGNAL(clicked()), this, SLOT(upButtonClicked()));
connect(_down, SIGNAL(clicked()), this, SLOT(downButtonClicked()));
connect(_availableListBox, SIGNAL(itemSelectionChanged()), this, SLOT(updateButtons()));
connect(_selectedListBox, SIGNAL(itemSelectionChanged()), this, SLOT(updateButtons()));
// Use the standard icons
_up->setIcon(QPixmap(":kst_uparrow.png"));
_down->setIcon(QPixmap(":kst_downarrow.png"));
_add->setIcon(QPixmap(":kst_rightarrow.png"));
_remove->setIcon(QPixmap(":kst_leftarrow.png"));
_up->setToolTip(i18n("Move the selected property up the priority list"));
_down->setToolTip(i18n("Move the selected property down the priority list"));
_add->setToolTip(i18n("Add the selected property to the list of properties to cycle through"));
_remove->setToolTip(i18n("Remove the selected property from the list of properties to cycle through"));
_maxLineWidth->setMaximum(LINEWIDTH_MAX);
}
ExportDlg::ExportDlg(QString title, PointSets* pointSets, const CoordSettings* coord,
const GridMeshSettings* grid, ExportSettings* xport) :
QDialog(0, "exportdlg", true),
pointSets(pointSets),
coord(coord),
grid(grid),
xport(xport)
{
DigitDebug::ctor(QString("exportdlg ") + QString::number((ulong) this, 16));
setCaption(tr("Export Settings - [%1]%2")
.arg(title)
.arg(freewareCaption));
setFixedSize(380, 650);
// curve selection
groupCurveSelection = new Q3GroupBox(QString(tr("Curve Selection")), this);
CHECK_PTR_ENGAUGE(groupCurveSelection);
groupCurveSelection->setGeometry(10, 10, 360, 150);
labelIncluded = new QLabel(QString(tr("Included")), groupCurveSelection);
CHECK_PTR_ENGAUGE(labelIncluded);
labelIncluded->setGeometry(10, 20, 110, 20);
labelExcluded = new QLabel(QString(tr("Not included")), groupCurveSelection);
CHECK_PTR_ENGAUGE(labelExcluded);
labelExcluded->setGeometry(240, 20, 110, 20);
listIncluded = new Q3ListBox(groupCurveSelection);
CHECK_PTR_ENGAUGE(listIncluded);
listIncluded->setGeometry(10, 40, 110, 100);
QWhatsThis::add(listIncluded, QString(tr("List of curves to be included in the exported file")));
connect(listIncluded, SIGNAL(selectionChanged(Q3ListBoxItem*)), this, SLOT(slotIncluded(Q3ListBoxItem*)));
listExcluded = new Q3ListBox(groupCurveSelection);
CHECK_PTR_ENGAUGE(listExcluded);
listExcluded->setGeometry(240, 40, 110, 100);
QWhatsThis::add(listExcluded, QString(tr("List of curves to be excluded from the exported file")));
connect(listExcluded, SIGNAL(selectionChanged(Q3ListBoxItem*)), this, SLOT(slotExcluded(Q3ListBoxItem*)));
buttonInclude = new QPushButton(QString(tr("<<Include")), groupCurveSelection);
CHECK_PTR_ENGAUGE(buttonInclude);
buttonInclude->setGeometry(130, 40, 100, 30);
QWhatsThis::add(buttonInclude, QString(tr("Move the currently selected curve from the excluded list "
"to the included list")));
connect(buttonInclude, SIGNAL(clicked()), this, SLOT(slotInclude()));
buttonExclude = new QPushButton(QString(tr("Exclude>>")), groupCurveSelection);
CHECK_PTR_ENGAUGE(buttonExclude);
buttonExclude->setGeometry(130, 80, 100, 30);
QWhatsThis::add(buttonExclude, QString(tr("Move the currently selected curve from the included list "
"to the excluded list")));
connect(buttonExclude, SIGNAL(clicked()), this, SLOT(slotExclude()));
// points selection
groupPointsSelection = new Q3ButtonGroup(QString(tr("Points Selection")), this);
CHECK_PTR_ENGAUGE(groupPointsSelection);
groupPointsSelection->setGeometry(10, 170, 360, 110);
buttonXAllCurves = new QRadioButton(QString(tr("Interpolate Y's at X's from all curves")),
groupPointsSelection);
CHECK_PTR_ENGAUGE(buttonXAllCurves);
buttonXAllCurves->setGeometry(10, 20, 300, 20);
QWhatsThis::add(buttonXAllCurves, QString(tr("Exported file will have values at every unique X "
"value from every curve. Y values will be linearly interpolated if necessary")));
connect(buttonXAllCurves, SIGNAL(toggled(bool)), this, SLOT(slotXAllCurves(bool)));
buttonXFirstCurve = new QRadioButton(QString(tr("Interpolate Y's at X's from first curve")),
groupPointsSelection);
CHECK_PTR_ENGAUGE(buttonXFirstCurve);
buttonXFirstCurve->setGeometry(10, 40, 300, 20);
QWhatsThis::add(buttonXFirstCurve, QString(tr("Exported file will have values at every unique X "
"value from the first curve. Y values will be linearly interpolated if necessary")));
connect(buttonXFirstCurve, SIGNAL(toggled(bool)), this, SLOT(slotXFirstCurve(bool)));
buttonXGridLines = new QRadioButton(QString(tr("Interpolate Y's at grid line X's")), groupPointsSelection);
CHECK_PTR_ENGAUGE(buttonXGridLines);
buttonXGridLines->setGeometry(10, 60, 300, 20);
QWhatsThis::add(buttonXGridLines, QString(tr("Exported file will have values at every unique X "
"grid line. Y values will be linearly interpolated if necessary")));
connect(buttonXGridLines, SIGNAL(toggled(bool)), this, SLOT(slotXGridLines(bool)));
buttonXYAllCurves = new QRadioButton(QString(tr("Raw X's and Y's")), groupPointsSelection);
CHECK_PTR_ENGAUGE(buttonXYAllCurves);
buttonXYAllCurves->setGeometry(10, 80, 300, 20);
QWhatsThis::add(buttonXYAllCurves, QString(tr("Exported file will have only original X and Y values "
"without any interpolation")));
connect(buttonXYAllCurves, SIGNAL(toggled(bool)), this, SLOT(slotXYAllCurves(bool)));
// layout
groupLayout = new Q3ButtonGroup(QString(tr("Layout")), this);
CHECK_PTR_ENGAUGE(groupLayout);
groupLayout->setGeometry(10, 290, 360, 70);
buttonAllCurvesOnEachLine = new QRadioButton(QString(tr("All curves on each line")), groupLayout);
CHECK_PTR_ENGAUGE(buttonAllCurvesOnEachLine);
buttonAllCurvesOnEachLine->setGeometry(10, 20, 210, 20);
QWhatsThis::add(buttonAllCurvesOnEachLine, QString(tr("Exported file will have, on each line, "
"an X value, the Y value for the first curve, the Y value for the second curve,...")));
connect(buttonAllCurvesOnEachLine, SIGNAL(toggled(bool)), this, SLOT(slotAllCurvesOnEachLine(bool)));
buttonOneCurveOnEachLine = new QRadioButton(QString(tr("One curve on each line")), groupLayout);
CHECK_PTR_ENGAUGE(buttonOneCurveOnEachLine);
buttonOneCurveOnEachLine->setGeometry(10, 40, 210, 20);
QWhatsThis::add(buttonOneCurveOnEachLine, QString(tr("Exported file will have all the points for "
"the first curve, with one X-Y pair on each line, then the points for the second curve,...")));
connect(buttonOneCurveOnEachLine, SIGNAL(toggled(bool)), this, SLOT(slotOneCurveOnEachLine(bool)));
// delimiters
groupDelimiters = new Q3ButtonGroup(QString(tr("Delimiters")), this);
CHECK_PTR_ENGAUGE(groupDelimiters);
groupDelimiters->setGeometry(10, 370, 113, 90);
buttonCommas = new QRadioButton(QString(tr("Commas")), groupDelimiters);
CHECK_PTR_ENGAUGE(buttonCommas);
buttonCommas->setGeometry(10, 20, 110, 20);
QWhatsThis::add(buttonCommas, QString(tr("Exported file will have commas between adjacent values")));
connect(buttonCommas, SIGNAL(toggled(bool)), this, SLOT(slotCommas(bool)));
buttonSpaces = new QRadioButton(QString(tr("Spaces")), groupDelimiters);
CHECK_PTR_ENGAUGE(buttonSpaces);
buttonSpaces->setGeometry(10, 40, 110, 20);
QWhatsThis::add(buttonSpaces, QString(tr("Exported file will have spaces between adjacent values")));
connect(buttonSpaces, SIGNAL(toggled(bool)), this, SLOT(slotSpaces(bool)));
buttonTabs = new QRadioButton(QString(tr("Tabs")), groupDelimiters);
CHECK_PTR_ENGAUGE(buttonTabs);
buttonTabs->setGeometry(10, 60, 110, 20);
QWhatsThis::add(buttonTabs, QString(tr("Exported file will have tabs between adjacent values")));
connect(buttonTabs, SIGNAL(toggled(bool)), this, SLOT(slotTabs(bool)));
// header
groupHeader = new Q3ButtonGroup(QString(tr("Header")), this);
CHECK_PTR_ENGAUGE(groupHeader);
groupHeader->setGeometry(133, 370, 113, 90);
buttonNone = new QRadioButton(QString(tr("None")), groupHeader);
CHECK_PTR_ENGAUGE(buttonNone);
buttonNone->setGeometry(10, 20, 110, 20);
QWhatsThis::add(buttonNone, QString(tr("Exported file will have no header line")));
connect(buttonNone, SIGNAL(toggled(bool)), this, SLOT(slotNone(bool)));
buttonSimple = new QRadioButton(QString(tr("Simple")), groupHeader);
CHECK_PTR_ENGAUGE(buttonSimple);
buttonSimple->setGeometry(10, 40, 110, 20);
QWhatsThis::add(buttonSimple, QString(tr("Exported file will have simple header line")));
connect(buttonSimple, SIGNAL(toggled(bool)), this, SLOT(slotSimple(bool)));
buttonGnuplot = new QRadioButton(QString(tr("Gnuplot")), groupHeader);
CHECK_PTR_ENGAUGE(buttonGnuplot);
buttonGnuplot->setGeometry(10, 60, 110, 20);
QWhatsThis::add(buttonGnuplot, QString(tr("Exported file will have gnuplot header line")));
connect(buttonGnuplot, SIGNAL(toggled(bool)), this, SLOT(slotGnuplot(bool)));
// x label for header
if (coord->frame == Cartesian)
labelXThetaLabel = new QLabel(QString(tr("Header X Label")), this);
else
labelXThetaLabel = new QLabel(QString(tr("Header Theta Label")), this);
CHECK_PTR_ENGAUGE(labelXThetaLabel);
labelXThetaLabel->setGeometry(256, 390, 114, 20);
editXThetaLabel = new QLineEdit(this);
CHECK_PTR_ENGAUGE(editXThetaLabel);
editXThetaLabel->setGeometry(256, 410, 110, 20);
if (coord->frame == Cartesian)
QWhatsThis::add(editXThetaLabel, QString(tr("Label in the header for x values")));
else
QWhatsThis::add(editXThetaLabel, QString(tr("Label in the header for theta values")));
connect(editXThetaLabel, SIGNAL(textEdited(const QString&)), this, SLOT(slotXThetaLabel(const QString&)));
// preview
labelPreview = new QLabel(QString(tr("Preview")), this);
CHECK_PTR_ENGAUGE(labelPreview);
labelPreview->setGeometry(10, 470, 100, 20);
listPreview = new Q3ListBox(this);
CHECK_PTR_ENGAUGE(listPreview);
listPreview->setGeometry(10, 490, 360, 110);
QWhatsThis::add(listPreview, QString(tr("Preview window shows how current settings affect the exported file")));
// navigation buttons
buttonOk = new QPushButton(tr("OK"), this);
CHECK_PTR_ENGAUGE(buttonOk);
buttonOk->setGeometry(45, 610, 100, 30);
connect(buttonOk, SIGNAL(clicked()), this, SLOT(accept()));
buttonCancel = new QPushButton(tr("Cancel"), this);
CHECK_PTR_ENGAUGE(buttonCancel);
buttonCancel->setGeometry(175, 610, 100, 30);
connect(buttonCancel, SIGNAL(clicked()), this, SLOT(reject()));
buttonWhat = new QPushButton(this);
CHECK_PTR_ENGAUGE(buttonWhat);
buttonWhat->setPixmap(QPixmap(whatsthis_xpm));
buttonWhat->setGeometry(305, 610, 60, 30);
QToolTip::add(buttonWhat, QString(tr("What's this?")));
connect(buttonWhat, SIGNAL(clicked()), this, SLOT(slotWhat()));
resetLists();
toggleActions();
updatePreview();
}