/*------------------------------------------------------------------------*
* usb_attach
*------------------------------------------------------------------------*/
int
usb_attach(device_t dev)
{
struct usb_bus *bus = device_get_ivars(dev);
DPRINTF("\n");
if (bus == NULL) {
device_printf(dev, "USB device has no ivars\n");
return (ENXIO);
}
if (usb_no_boot_wait == 0) {
/* delay vfs_mountroot until the bus is explored */
bus->bus_roothold = root_mount_hold(device_get_nameunit(dev));
}
usb_attach_sub(dev, bus);
return (0); /* return success */
}
/*------------------------------------------------------------------------*
* usb_attach
*------------------------------------------------------------------------*/
static int
usb_attach(device_t dev)
{
struct usb_bus *bus = device_get_ivars(dev);
DPRINTF("\n");
if (bus == NULL) {
device_printf(dev, "USB device has no ivars\n");
return (ENXIO);
}
#if 0 /* XXX: Dragonfly does not seem to have this mechanism? */
if (usb_no_boot_wait == 0) {
/* delay vfs_mountroot until the bus is explored */
bus->bus_roothold = root_mount_hold(device_get_nameunit(dev));
}
#endif
usb_attach_sub(dev, bus);
return (0); /* return success */
}
static int
cbb_pci_attach(device_t brdev)
{
static int curr_bus_number = 2; /* XXX EVILE BAD (see below) */
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(brdev);
struct sysctl_ctx_list *sctx;
struct sysctl_oid *soid;
int rid;
device_t parent;
uint32_t pribus;
parent = device_get_parent(brdev);
mtx_init(&sc->mtx, device_get_nameunit(brdev), "cbb", MTX_DEF);
sc->chipset = cbb_chipset(pci_get_devid(brdev), NULL);
sc->dev = brdev;
sc->cbdev = NULL;
sc->exca[0].pccarddev = NULL;
sc->domain = pci_get_domain(brdev);
sc->secbus = pci_read_config(brdev, PCIR_SECBUS_2, 1);
sc->subbus = pci_read_config(brdev, PCIR_SUBBUS_2, 1);
sc->pribus = pcib_get_bus(parent);
SLIST_INIT(&sc->rl);
cbb_powerstate_d0(brdev);
rid = CBBR_SOCKBASE;
sc->base_res = bus_alloc_resource_any(brdev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->base_res) {
device_printf(brdev, "Could not map register memory\n");
mtx_destroy(&sc->mtx);
return (ENOMEM);
} else {
DEVPRINTF((brdev, "Found memory at %08lx\n",
rman_get_start(sc->base_res)));
}
sc->bst = rman_get_bustag(sc->base_res);
sc->bsh = rman_get_bushandle(sc->base_res);
exca_init(&sc->exca[0], brdev, sc->bst, sc->bsh, CBB_EXCA_OFFSET);
sc->exca[0].flags |= EXCA_HAS_MEMREG_WIN;
sc->exca[0].chipset = EXCA_CARDBUS;
sc->chipinit = cbb_chipinit;
sc->chipinit(sc);
/*Sysctls*/
sctx = device_get_sysctl_ctx(brdev);
soid = device_get_sysctl_tree(brdev);
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "domain",
CTLFLAG_RD, &sc->domain, 0, "Domain number");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "pribus",
CTLFLAG_RD, &sc->pribus, 0, "Primary bus number");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "secbus",
CTLFLAG_RD, &sc->secbus, 0, "Secondary bus number");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "subbus",
CTLFLAG_RD, &sc->subbus, 0, "Subordinate bus number");
#if 0
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "memory",
CTLFLAG_RD, &sc->subbus, 0, "Memory window open");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "premem",
CTLFLAG_RD, &sc->subbus, 0, "Prefetch memroy window open");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "io1",
CTLFLAG_RD, &sc->subbus, 0, "io range 1 open");
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "io2",
CTLFLAG_RD, &sc->subbus, 0, "io range 2 open");
#endif
/*
* This is a gross hack. We should be scanning the entire pci
* tree, assigning bus numbers in a way such that we (1) can
* reserve 1 extra bus just in case and (2) all sub busses
* are in an appropriate range.
*/
DEVPRINTF((brdev, "Secondary bus is %d\n", sc->secbus));
pribus = pci_read_config(brdev, PCIR_PRIBUS_2, 1);
if (sc->secbus == 0 || sc->pribus != pribus) {
if (curr_bus_number <= sc->pribus)
curr_bus_number = sc->pribus + 1;
if (pribus != sc->pribus) {
DEVPRINTF((brdev, "Setting primary bus to %d\n",
sc->pribus));
pci_write_config(brdev, PCIR_PRIBUS_2, sc->pribus, 1);
}
sc->secbus = curr_bus_number++;
sc->subbus = curr_bus_number++;
DEVPRINTF((brdev, "Secondary bus set to %d subbus %d\n",
sc->secbus, sc->subbus));
pci_write_config(brdev, PCIR_SECBUS_2, sc->secbus, 1);
pci_write_config(brdev, PCIR_SUBBUS_2, sc->subbus, 1);
}
/* attach children */
sc->cbdev = device_add_child(brdev, "cardbus", -1);
if (sc->cbdev == NULL)
DEVPRINTF((brdev, "WARNING: cannot add cardbus bus.\n"));
else if (device_probe_and_attach(sc->cbdev) != 0)
DEVPRINTF((brdev, "WARNING: cannot attach cardbus bus!\n"));
sc->exca[0].pccarddev = device_add_child(brdev, "pccard", -1);
if (sc->exca[0].pccarddev == NULL)
DEVPRINTF((brdev, "WARNING: cannot add pccard bus.\n"));
else if (device_probe_and_attach(sc->exca[0].pccarddev) != 0)
DEVPRINTF((brdev, "WARNING: cannot attach pccard bus.\n"));
/* Map and establish the interrupt. */
rid = 0;
sc->irq_res = bus_alloc_resource_any(brdev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->irq_res == NULL) {
device_printf(brdev, "Unable to map IRQ...\n");
goto err;
}
if (bus_setup_intr(brdev, sc->irq_res, INTR_TYPE_AV | INTR_MPSAFE,
cbb_pci_filt, NULL, sc, &sc->intrhand)) {
device_printf(brdev, "couldn't establish interrupt\n");
goto err;
}
/* reset 16-bit pcmcia bus */
exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
/* turn off power */
cbb_power(brdev, CARD_OFF);
/* CSC Interrupt: Card detect interrupt on */
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
/* reset interrupt */
cbb_set(sc, CBB_SOCKET_EVENT, cbb_get(sc, CBB_SOCKET_EVENT));
if (bootverbose)
cbb_print_config(brdev);
/* Start the thread */
if (kproc_create(cbb_event_thread, sc, &sc->event_thread, 0, 0,
"%s event thread", device_get_nameunit(brdev))) {
device_printf(brdev, "unable to create event thread.\n");
panic("cbb_create_event_thread");
}
sc->sc_root_token = root_mount_hold(device_get_nameunit(sc->dev));
return (0);
err:
if (sc->irq_res)
bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res);
if (sc->base_res) {
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
sc->base_res);
}
mtx_destroy(&sc->mtx);
return (ENOMEM);
}
