/*++ AT_Command[Flash mode] : [email protected]_20121012 ++*/ void camera_flash_on_off(int value) // Flash { if(value == POWER_ON) { Cam_Printk("Camera Flash ON..\n"); #if defined(CONFIG_LEDS_RT8547) #if defined(CONFIG_MACH_WILCOX) if(system_rev == 1){ rear_camera = TRUE; rt8547_set_led_low(); } else { rear_camera = TRUE; gpio_direction_output(camera_flash_en, 0); /*Enable */ gpio_direction_output(camera_flash_set, 1); } #else rear_camera = TRUE; rt8547_set_led_low(); #endif #else gpio_direction_output(camera_flash_en, 0); /*Enable */ gpio_direction_output(camera_flash_set, 1); #endif } else { Cam_Printk("Camera Flash OFF..\n"); #if defined(CONFIG_LEDS_RT8547) #if defined(CONFIG_MACH_WILCOX) if(system_rev == 1){ rear_camera = FALSE; rt8547_set_led_off(); } else { rear_camera = FALSE; gpio_direction_output(camera_flash_en, 0); /*Disable */ gpio_direction_output(camera_flash_set, 0); } #else rear_camera = FALSE; rt8547_set_led_off(); #endif #else gpio_direction_output(camera_flash_en, 0); /*Disable */ gpio_direction_output(camera_flash_set, 0); #endif } }
/*++ AT_Command[Flash mode] : [email protected]_20121012 ++*/ void camera_flash_on_off(int value) // Flash { #ifdef CONFIG_FLED_RT5033 rt_fled_info_t *rt5033_fled; rt5033_fled=rt_fled_get_info_by_name(NULL); #endif if(value == POWER_ON) { Cam_Printk("Camera Flash ON..\n"); #ifdef CONFIG_FLED_RT5033 rt5033_fled->hal->fled_set_mode(rt5033_fled,FLASHLIGHT_MODE_TORCH); #elif CONFIG_LEDS_RT8547 rt8547_set_led_low(); #endif rear_camera = TRUE; } else { Cam_Printk("Camera Flash OFF..\n"); #ifdef CONFIG_FLED_RT5033 rt5033_fled->hal->fled_set_mode(rt5033_fled,FLASHLIGHT_MODE_OFF); #elif CONFIG_LEDS_RT8547 rt8547_set_led_off(); #endif rear_camera = FALSE; } }
int msm_camera_flash_led(
struct msm_camera_sensor_flash_external *external,
unsigned led_state)
{
#ifdef CONFIG_IMX175
#if defined(CONFIG_MACH_MELIUS)
int i = 0;
#endif
int rc = 0;
if(Torch_On == true) {
cam_err("[Assistive Light On!!\n");
return 0;
}
#if defined(CONFIG_MACH_MELIUS)
/* FLASH IC : KTD2692 */
cam_err("[led_state::%d]\n", led_state);
switch (led_state) {
case MSM_CAMERA_LED_INIT:
cam_err("[MSM_CAMERA_LED_INIT]\n");
#if defined(CONFIG_MACH_CRATER_CHN_CTC) || defined(CONFIG_MACH_MELIUS_VZW) || defined(CONFIG_MACH_MELIUS_SPR) || defined(CONFIG_MACH_MELIUS_USC)
if (system_rev < 0X01) {
#else
if (system_rev < 0x07) {
#endif
set_gpio_ENF(external, false);
} else {
/* Disable Cutoff Low voltage */
KTD2692_ctrl_cmd(external, LVP_SETTING | 0x00);
/*D2692_ctrl_cmd(external, MODE_CONTROL | 0x00);*/
}
break;
case MSM_CAMERA_LED_RELEASE:
cam_err("[MSM_CAMERA_LED_RELEASE]\n");
gpio_set_value_cansleep(external->led_flash_en, 0);
break;
case MSM_CAMERA_LED_OFF:
cam_err("[MSM_CAMERA_LED_OFF]\n");
#if defined(CONFIG_MACH_CRATER_CHN_CTC) || defined(CONFIG_MACH_MELIUS_VZW) || defined(CONFIG_MACH_MELIUS_SPR) || defined(CONFIG_MACH_MELIUS_USC)
if (system_rev < 0X01) {
#else
if (system_rev < 0x07) {
#endif
set_gpio_ENF(external, false);
} else {
KTD2692_ctrl_cmd(external, MODE_CONTROL | 0x00);
}
break;
case MSM_CAMERA_LED_LOW:
/* Movie Current Setting : 0x64 (5/16) */
cam_err("[MSM_CAMERA_LED_LOW]\n");
#if defined(CONFIG_MACH_CRATER_CHN_CTC) || defined(CONFIG_MACH_MELIUS_VZW) || defined(CONFIG_MACH_MELIUS_SPR) || defined(CONFIG_MACH_MELIUS_USC)
if (system_rev < 0X01) {
#else
if (system_rev < 0x07) {
#endif
for (i = 2; i > 0; i--) {
set_gpio_ENF(external, false);
ndelay(300);
set_gpio_ENF(external, true);
ndelay(300);
}
} else {
/* Disable Cutoff Low voltage */
KTD2692_ctrl_cmd(external, LVP_SETTING | 0x00);
/*KTD2692_ctrl_cmd(external, MOVIE_CURRENT | 0x04);*/
KTD2692_ctrl_cmd(external, MODE_CONTROL | 0x01);
}
break;
case MSM_CAMERA_LED_HIGH:
cam_err("[MSM_CAMERA_LED_HIGH]\n");
#if defined(CONFIG_MACH_CRATER_CHN_CTC) || defined(CONFIG_MACH_MELIUS_VZW) || defined(CONFIG_MACH_MELIUS_SPR) || defined(CONFIG_MACH_MELIUS_USC)
if (system_rev < 0X01) {
#else
if (system_rev < 0x07) {
#endif
for (i = 16; i > 0; i--) {
set_gpio_ENF(external, false);
ndelay(300);
set_gpio_ENF(external, true);
ndelay(300);
}
} else {
/* Disable Cutoff Low voltage */
KTD2692_ctrl_cmd(external, LVP_SETTING | 0x00);
/*KTD2692_ctrl_cmd(external, FLASH_CURRENT | 0x0F);*/
KTD2692_ctrl_cmd(external, MODE_CONTROL | 0x02);
}
break;
default:
cam_err("[default]\n");
rc = -EFAULT;
break;
}
#elif defined (CONFIG_MACH_SERRANO) || defined (CONFIG_MACH_CRATER) || defined (CONFIG_MACH_BAFFIN)
/* FLASH IC : MIC2871YMK*/
cam_err("[led_state::%d]\n", led_state);
switch (led_state) {
case MSM_CAMERA_LED_INIT:
cam_err("[MSM_CAMERA_LED_INIT][MIC2871YMK]\n");
gpio_tlmm_config(GPIO_CFG(GPIO_MSM_FLASH_CNTL_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(GPIO_MSM_FLASH_NOW, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
break;
case MSM_CAMERA_LED_RELEASE:
MIC2871YMK_set_flash_flash(0);
cam_err("[MSM_CAMERA_LED_RELEASE][MIC2871YMK]\n");
break;
case MSM_CAMERA_LED_OFF:
cam_err("[MSM_CAMERA_LED_OFF][MIC2871YMK]\n");
MIC2871YMK_set_flash_flash(0);
break;
case MSM_CAMERA_LED_LOW:
cam_err("[MSM_CAMERA_LED_LOW][MIC2871YMK]\n");
MIC2871YMK_set_flash_movie(1);
break;
case MSM_CAMERA_LED_HIGH:
cam_err("[MSM_CAMERA_LED_HIGH][MIC2871YMK]\n");
MIC2871YMK_set_flash_flash(1);
break;
default:
cam_err("[default][MIC2871YMK]\n");
rc = -EFAULT;
break;
}
#elif defined (CONFIG_MACH_KS02)
printk("[led_state::%d]\n", led_state);
switch (led_state) {
case MSM_CAMERA_LED_INIT:
cam_err("[MSM_CAMERA_LED_INIT]\n");
break;
case MSM_CAMERA_LED_RELEASE:
cam_err("[MSM_CAMERA_LED_RELEASE]\n");
gpio_set_value_cansleep(GPIO_CAM_FLASH_EN, 0);
gpio_set_value_cansleep(GPIO_CAM_FLASH_SET, 0);
break;
case MSM_CAMERA_LED_OFF:
cam_err("[MSM_CAMERA_LED_OFF]\n");
gpio_set_value_cansleep(GPIO_CAM_FLASH_EN, 0);
gpio_set_value_cansleep(GPIO_CAM_FLASH_SET, 0);
break;
case MSM_CAMERA_LED_LOW:
cam_err("[MSM_CAMERA_LED_LOW]\n");
gpio_set_value_cansleep(GPIO_CAM_FLASH_SET, 1);
break;
case MSM_CAMERA_LED_HIGH:
cam_err("[MSM_CAMERA_LED_HIGH]\n");
gpio_set_value_cansleep(GPIO_CAM_FLASH_EN, 1);
break;
default:
cam_err("[default]\n");
rc = -EFAULT;
break;
}
#endif
return rc;
#elif defined (CONFIG_S5K4ECGX)
#if defined (CONFIG_MACH_CANE) || defined (CONFIG_MACH_LOGANRE)
int rc = 0;
printk("[led_state::%d]\n", led_state);
switch (led_state) {
case MSM_CAMERA_LED_INIT:
cam_err("[MSM_CAMERA_LED_INIT][RT8547]\n");
gpio_tlmm_config(GPIO_CFG(GPIO_CAM_FLASH_SOURCE_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(GPIO_CAM_FLASH_SET, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(GPIO_CAM_FLASH_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
/* LVP */
//RT8547_ctrl_cmd(external, 0x00);
break;
case MSM_CAMERA_LED_RELEASE:
cam_err("[MSM_CAMERA_LED_RELEASE]\n");
break;
case MSM_CAMERA_LED_OFF:
printk("[Torch flash]OFF\n");
#if defined (CONFIG_LEDS_RT8547)
rt8547_set_led_off();
#endif
break;
case MSM_CAMERA_LED_LOW:
printk("[Torch flash]ON\n");
#if defined (CONFIG_LEDS_RT8547)
rt8547_set_led_low();
#endif
break;
case MSM_CAMERA_LED_HIGH:
printk("[Torch flash]ON\n");
#if defined (CONFIG_LEDS_RT8547)
rt8547_set_led_high();
#endif
break;
default:
rc = -EFAULT;
break;
}
#endif
return rc;
#else
int rc = 0;
CDBG("msm_camera_flash_led: %d\n", led_state);
switch (led_state) {
case MSM_CAMERA_LED_INIT:
rc = gpio_request(external->led_en, "sgm3141");
CDBG("MSM_CAMERA_LED_INIT: gpio_req: %d %d\n",
external->led_en, rc);
if (!rc)
gpio_direction_output(external->led_en, 0);
else
return 0;
rc = gpio_request(external->led_flash_en, "sgm3141");
CDBG("MSM_CAMERA_LED_INIT: gpio_req: %d %d\n",
external->led_flash_en, rc);
if (!rc)
gpio_direction_output(external->led_flash_en, 0);
break;
case MSM_CAMERA_LED_RELEASE:
CDBG("MSM_CAMERA_LED_RELEASE\n");
gpio_set_value_cansleep(external->led_en, 0);
gpio_free(external->led_en);
gpio_set_value_cansleep(external->led_flash_en, 0);
gpio_free(external->led_flash_en);
break;
case MSM_CAMERA_LED_OFF:
CDBG("MSM_CAMERA_LED_OFF\n");
gpio_set_value_cansleep(external->led_en, 0);
gpio_set_value_cansleep(external->led_flash_en, 0);
break;
case MSM_CAMERA_LED_LOW:
CDBG("MSM_CAMERA_LED_LOW\n");
gpio_set_value_cansleep(external->led_en, 1);
gpio_set_value_cansleep(external->led_flash_en, 1);
break;
case MSM_CAMERA_LED_HIGH:
CDBG("MSM_CAMERA_LED_HIGH\n");
gpio_set_value_cansleep(external->led_en, 1);
gpio_set_value_cansleep(external->led_flash_en, 1);
break;
default:
rc = -EFAULT;
break;
}
return rc;
#endif
}
static void flash_wq_function(struct work_struct *work)
{
if (tps61310_client) {
i2c_client.client = tps61310_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
msm_camera_i2c_write(&i2c_client, 0x01,
0x46, MSM_CAMERA_I2C_BYTE_DATA);
}
return;
}
void flash_timer_callback(unsigned long data)
{
queue_work(flash_wq, (struct work_struct *)work );
mod_timer(&flash_timer, jiffies + msecs_to_jiffies(10000));
}
int msm_camera_flash_external(
struct msm_camera_sensor_flash_external *external,
unsigned led_state)
{
int rc = 0;
switch (led_state) {
case MSM_CAMERA_LED_INIT:
if (external->flash_id == MAM_CAMERA_EXT_LED_FLASH_SC628A) {
if (!sc628a_client) {
rc = i2c_add_driver(&sc628a_i2c_driver);
if (rc < 0 || sc628a_client == NULL) {
pr_err("sc628a_i2c_driver add failed\n");
rc = -ENOTSUPP;
return rc;
}
}
} else if (external->flash_id ==
MAM_CAMERA_EXT_LED_FLASH_TPS61310) {
if (!tps61310_client) {
rc = i2c_add_driver(&tps61310_i2c_driver);
if (rc < 0 || tps61310_client == NULL) {
pr_err("tps61310_i2c_driver add failed\n");
rc = -ENOTSUPP;
return rc;
}
}
} else {
pr_err("Flash id not supported\n");
rc = -ENOTSUPP;
return rc;
}
#if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE)
if (external->expander_info && !sx150x_client) {
struct i2c_adapter *adapter =
i2c_get_adapter(external->expander_info->bus_id);
if (adapter)
sx150x_client = i2c_new_device(adapter,
external->expander_info->board_info);
if (!sx150x_client || !adapter) {
pr_err("sx150x_client is not available\n");
rc = -ENOTSUPP;
if (sc628a_client) {
i2c_del_driver(&sc628a_i2c_driver);
sc628a_client = NULL;
}
if (tps61310_client) {
i2c_del_driver(&tps61310_i2c_driver);
tps61310_client = NULL;
}
return rc;
}
i2c_put_adapter(adapter);
}
#endif
if (sc628a_client)
rc = gpio_request(external->led_en, "sc628a");
if (tps61310_client)
rc = gpio_request(external->led_en, "tps61310");
if (!rc) {
gpio_direction_output(external->led_en, 0);
} else {
goto error;
}
if (sc628a_client)
rc = gpio_request(external->led_flash_en, "sc628a");
if (tps61310_client)
rc = gpio_request(external->led_flash_en, "tps61310");
if (!rc) {
gpio_direction_output(external->led_flash_en, 0);
break;
}
if (sc628a_client || tps61310_client) {
gpio_set_value_cansleep(external->led_en, 0);
gpio_free(external->led_en);
}
error:
pr_err("%s gpio request failed\n", __func__);
if (sc628a_client) {
i2c_del_driver(&sc628a_i2c_driver);
sc628a_client = NULL;
}
if (tps61310_client) {
i2c_del_driver(&tps61310_i2c_driver);
tps61310_client = NULL;
}
break;
case MSM_CAMERA_LED_RELEASE:
if (sc628a_client || tps61310_client) {
gpio_set_value_cansleep(external->led_en, 0);
gpio_free(external->led_en);
gpio_set_value_cansleep(external->led_flash_en, 0);
gpio_free(external->led_flash_en);
if (sc628a_client) {
i2c_del_driver(&sc628a_i2c_driver);
sc628a_client = NULL;
}
if (tps61310_client) {
if (timer_state) {
del_timer(&flash_timer);
kfree((void *)work);
timer_state = 0;
}
i2c_del_driver(&tps61310_i2c_driver);
tps61310_client = NULL;
}
}
#if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE)
if (external->expander_info && sx150x_client) {
i2c_unregister_device(sx150x_client);
sx150x_client = NULL;
}
#endif
break;
case MSM_CAMERA_LED_OFF:
if (sc628a_client || tps61310_client) {
if (sc628a_client) {
i2c_client.client = sc628a_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x02,
0x00, MSM_CAMERA_I2C_BYTE_DATA);
}
if (tps61310_client) {
i2c_client.client = tps61310_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x01,
0x00, MSM_CAMERA_I2C_BYTE_DATA);
if (timer_state) {
del_timer(&flash_timer);
kfree((void *)work);
timer_state = 0;
}
}
gpio_set_value_cansleep(external->led_en, 0);
gpio_set_value_cansleep(external->led_flash_en, 0);
}
break;
case MSM_CAMERA_LED_LOW:
if (sc628a_client || tps61310_client) {
gpio_set_value_cansleep(external->led_en, 1);
gpio_set_value_cansleep(external->led_flash_en, 1);
usleep_range(2000, 3000);
if (sc628a_client) {
i2c_client.client = sc628a_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x02,
0x06, MSM_CAMERA_I2C_BYTE_DATA);
}
if (tps61310_client) {
i2c_client.client = tps61310_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x01,
0x46, MSM_CAMERA_I2C_BYTE_DATA);
flash_wq = create_workqueue("my_queue");
work = (struct flash_work *)kmalloc(sizeof(struct flash_work), GFP_KERNEL);
INIT_WORK( (struct work_struct *)work, flash_wq_function );
setup_timer(&flash_timer, flash_timer_callback, 0);
mod_timer(&flash_timer, jiffies + msecs_to_jiffies(10000));
timer_state = 1;
}
}
break;
case MSM_CAMERA_LED_HIGH:
if (sc628a_client || tps61310_client) {
gpio_set_value_cansleep(external->led_en, 1);
gpio_set_value_cansleep(external->led_flash_en, 1);
usleep_range(2000, 3000);
if (sc628a_client) {
i2c_client.client = sc628a_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x02,
0x49, MSM_CAMERA_I2C_BYTE_DATA);
}
if (tps61310_client) {
i2c_client.client = tps61310_client;
i2c_client.addr_type = MSM_CAMERA_I2C_BYTE_ADDR;
rc = msm_camera_i2c_write(&i2c_client, 0x01,
0x8B, MSM_CAMERA_I2C_BYTE_DATA);
}
}
break;
default:
rc = -EFAULT;
break;
}
return rc;
}
static int msm_camera_flash_pwm(
struct msm_camera_sensor_flash_pwm *pwm,
unsigned led_state)
{
int rc = 0;
int PWM_PERIOD = USEC_PER_SEC / pwm->freq;
static struct pwm_device *flash_pwm;
if (!flash_pwm) {
flash_pwm = pwm_request(pwm->channel, "camera-flash");
if (flash_pwm == NULL || IS_ERR(flash_pwm)) {
pr_err("%s: FAIL pwm_request(): flash_pwm=%p\n",
__func__, flash_pwm);
flash_pwm = NULL;
return -ENXIO;
}
}
switch (led_state) {
case MSM_CAMERA_LED_LOW:
rc = pwm_config(flash_pwm,
(PWM_PERIOD/pwm->max_load)*pwm->low_load,
PWM_PERIOD);
if (rc >= 0)
rc = pwm_enable(flash_pwm);
break;
case MSM_CAMERA_LED_HIGH:
rc = pwm_config(flash_pwm,
(PWM_PERIOD/pwm->max_load)*pwm->high_load,
PWM_PERIOD);
if (rc >= 0)
rc = pwm_enable(flash_pwm);
break;
case MSM_CAMERA_LED_OFF:
pwm_disable(flash_pwm);
break;
case MSM_CAMERA_LED_INIT:
case MSM_CAMERA_LED_RELEASE:
break;
default:
rc = -EFAULT;
break;
}
return rc;
}
int msm_camera_flash_pmic(
struct msm_camera_sensor_flash_pmic *pmic,
unsigned led_state)
{
int rc = 0;
switch (led_state) {
case MSM_CAMERA_LED_OFF:
rc = pmic->pmic_set_current(pmic->led_src_1, 0);
if (pmic->num_of_src > 1)
rc = pmic->pmic_set_current(pmic->led_src_2, 0);
break;
case MSM_CAMERA_LED_LOW:
rc = pmic->pmic_set_current(pmic->led_src_1,
pmic->low_current);
if (pmic->num_of_src > 1)
rc = pmic->pmic_set_current(pmic->led_src_2, 0);
break;
case MSM_CAMERA_LED_HIGH:
rc = pmic->pmic_set_current(pmic->led_src_1,
pmic->high_current);
if (pmic->num_of_src > 1)
rc = pmic->pmic_set_current(pmic->led_src_2,
pmic->high_current);
break;
case MSM_CAMERA_LED_INIT:
case MSM_CAMERA_LED_RELEASE:
break;
default:
rc = -EFAULT;
break;
}
CDBG("flash_set_led_state: return %d\n", rc);
return rc;
}
