int timer_handler(int irq, void* data) {
ticks++;
assert(current != NULL);
run_timer_list();
lapiceoi();
return 0;
}
void irq_handler(){
uint32_t pending = inw(VIC_VBASE+INTERRUPT_STATUS);
uint32_t irq = 0;
while(pending > 0){
irq = inw(VIC_VBASE+INTERRUPT_NUMBER);
if(actions[irq].handler){
(*actions[irq].handler)(irq, actions[irq].opaque);
}else{
pic_disable(irq);
}
pending = inw(VIC_VBASE+INTERRUPT_STATUS);
}
#if 0
if(status & (1<<TIMER0_IRQ)){
//kprintf("@");
ticks++;
//assert(pls_read(current) != NULL);
run_timer_list();
clock_clear();
}
if( status & (1<<UART_IRQ) ){
//if ((c = cons_getc()) == 13) {
// debug_monitor(tf);
//}
//else {
extern void dev_stdin_write(char c);
char c = cons_getc();
dev_stdin_write(c);
//}
//kprintf("#");
serial_clear();
}
#endif
}
int clock_int_handler(void * data)
{
ticks++;
// if( (ticks & 0x1F) == 0)
// cons_putc('A');
run_timer_list();
reload_timer();
return 0;
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret;
switch (tf->tf_trapno) {
case T_DEBUG:
case T_BRKPT:
debug_monitor(tf);
break;
case T_PGFLT:
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. %e\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. %e\n", ret);
}
cprintf("killed by kernel.\n");
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
ticks ++;
assert(current != NULL);
run_timer_list();
break;
case IRQ_OFFSET + IRQ_COM1:
case IRQ_OFFSET + IRQ_KBD:
if ((c = cons_getc()) == 13) {
debug_monitor(tf);
}
else {
cprintf("%s [%03d] %c\n",
(tf->tf_trapno != IRQ_OFFSET + IRQ_KBD) ? "serial" : "kbd", c, c);
}
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
panic("unexpected trap in kernel.\n");
}
}
void do_timer(struct pt_regs *regs)
{
jiffies++;
#ifdef NEED_RESCHED /* need_resched is not checked anywhere */
if (!((int) jiffies & 7))
need_resched = 1; /* how primitive can you get? */
#endif
run_timer_list();
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret=0;
switch (tf->tf_trapno) {
case T_PGFLT: //page fault
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. ret=%d\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. ret=%d\n", ret);
}
cprintf("killed by kernel.\n");
panic("handle user mode pgfault failed. ret=%d\n", ret);
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
#if 0
LAB3 : If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 YOUR CODE : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
/* LAB5 YOUR CODE */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
/* LAB6 YOUR CODE */
/* IMPORTANT FUNCTIONS:
* run_timer_list
*----------------------
* you should update your lab5 code (just add ONE or TWO lines of code):
* Every tick, you should update the system time, iterate the timers, and trigger the timers which are end to call scheduler.
* You can use one funcitons to finish all these things.
*/
ticks ++;
run_timer_list();
break;
case IRQ_OFFSET + IRQ_COM1:
c = cons_getc();
cprintf("serial [%03d] %c\n", c, c);
break;
case IRQ_OFFSET + IRQ_KBD:
c = cons_getc();
cprintf("kbd [%03d] %c\n", c, c);
break;
//LAB1 CHALLENGE 1 : 13307130148 you should modify below codes.
case T_SWITCH_TOU:
cprintf("To user mode\n");
if (tf->tf_cs != USER_CS) {
tfk2u = *tf;
tfk2u.tf_cs = USER_CS;
tfk2u.tf_ds = tfk2u.tf_es = tfk2u.tf_ss = USER_DS;
tfk2u.tf_esp = (uint32_t)tf + sizeof(struct trapframe) - 8;
tfk2u.tf_eflags |= (3 << 12);
*((uint32_t *)tf - 1) = (uint32_t)&tfk2u;
}
break;
case T_SWITCH_TOK:
cprintf("To kernel mode\n");
//panic("T_SWITCH_** ??\n");
struct trapframe *tfu2k;
if (tf->tf_cs != KERNEL_CS) {
tf->tf_cs = KERNEL_CS;
tf->tf_ds = tf->tf_es = KERNEL_DS;
tf->tf_eflags &= ~(3 << 12);
tfu2k = (struct trapframe*)((uint32_t)tf->tf_esp - sizeof(struct trapframe) + 8);
memmove(tfu2k, tf, sizeof(struct trapframe)-8);
*((uint32_t *)tf - 1) = (uint32_t)tfu2k;
}
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret=0;
switch (tf->tf_trapno) {
case T_PGFLT: //page fault
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. ret=%d\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. ret=%d\n", ret);
}
cprintf("killed by kernel.\n");
panic("handle user mode pgfault failed. ret=%d\n", ret);
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
#if 0
LAB3 : If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 YOUR CODE : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
/* LAB5 YOUR CODE */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
ticks ++;
assert(current != NULL);
run_timer_list();
break;
case IRQ_OFFSET + IRQ_COM1:
c = cons_getc();
cprintf("serial [%03d] %c\n", c, c);
break;
case IRQ_OFFSET + IRQ_KBD:
c = cons_getc();
cprintf("kbd [%03d] %c\n", c, c);
break;
//LAB1 CHALLENGE 1 : YOUR CODE you should modify below codes.
case T_SWITCH_TOU:
case T_SWITCH_TOK:
panic("T_SWITCH_** ??\n");
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void PIT_bh(void *unused)
{
run_timer_list();
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret=0;
switch (tf->tf_trapno) {
case T_PGFLT: //page fault
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. ret=%d\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. ret=%d\n", ret);
}
cprintf("killed by kernel.\n");
panic("handle user mode pgfault failed. ret=%d\n", ret);
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
#if 0
LAB3 :
If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 2013011365 : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
/* LAB5 YOUR CODE */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
/* LAB6 YOUR CODE */
/* you should upate you lab5 code
* IMPORTANT FUNCTIONS:
* sched_class_proc_tick
*/
/* LAB7 YOUR CODE */
/* you should upate you lab6 code
* IMPORTANT FUNCTIONS:
* run_timer_list
*/
ticks++;
run_timer_list();
sched_class_proc_tick(current);
break;
case IRQ_OFFSET + IRQ_COM1:
case IRQ_OFFSET + IRQ_KBD:
// There are user level shell in LAB8, so we need change COM/KBD interrupt processing.
c = cons_getc();
{
extern void dev_stdin_write(char c);
dev_stdin_write(c);
}
break;
//LAB1 CHALLENGE 1 : YOUR CODE you should modify below codes.
case T_SWITCH_TOU:
if(tf->tf_cs != USER_CS) {
user_stack = *tf;
user_stack.tf_cs = USER_CS;
user_stack.tf_ds = USER_DS;
user_stack.tf_ss = USER_DS;
user_stack.tf_es = USER_DS;
user_stack.tf_esp = (uint32_t)tf + sizeof(struct trapframe) - 8;
user_stack.tf_eflags |= FL_IOPL_MASK;
*((uint32_t *)tf - 1) = (uint32_t)&user_stack;
}
break;
case T_SWITCH_TOK:
if(tf->tf_cs != KERNEL_CS) {
tf->tf_cs = KERNEL_CS;
tf->tf_ds = KERNEL_DS;
tf->tf_es = KERNEL_DS;
tf->tf_eflags &= ~FL_IOPL_MASK;
struct trapframe* k = (struct trapframe*)(tf->tf_esp - (sizeof(struct trapframe) - 8));
memmove(k, tf, sizeof(struct trapframe) -8);
*((uint32_t *)tf - 1) = (uint32_t)k;
}
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret=0;
switch (tf->tf_trapno) {
case T_PGFLT: //page fault
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. ret=%d\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. ret=%d\n", ret);
}
cprintf("killed by kernel.\n");
panic("handle user mode pgfault failed. ret=%d\n", ret);
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
#if 0
LAB3 : If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 YOUR CODE : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
/* LAB5 YOUR CODE */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
/* LAB6 YOUR CODE */
/* you should upate you lab5 code
* IMPORTANT FUNCTIONS:
* sched_class_proc_tick
*/
ticks++;
run_timer_list(current);
break;
case IRQ_OFFSET + IRQ_COM1:
c = cons_getc();
cprintf("serial [%03d] %c\n", c, c);
break;
case IRQ_OFFSET + IRQ_KBD:
c = cons_getc();
cprintf("kbd [%03d] %c\n", c, c);
break;
//LAB1 CHALLENGE 1 : YOUR CODE you should modify below codes.
case T_SWITCH_TOU:
if (tf->tf_cs != USER_CS) {
switchk2u = *tf;
switchk2u.tf_cs = USER_CS;
switchk2u.tf_ds = switchk2u.tf_es = switchk2u.tf_ss = USER_DS;
switchk2u.tf_esp = (uint32_t)tf + sizeof(struct trapframe) - 8;
// set eflags, make sure ucore can use io under user mode.
// if CPL > IOPL, then cpu will generate a general protection.
switchk2u.tf_eflags |= FL_IOPL_MASK;
// set temporary stack
// then iret will jump to the right stack
*((uint32_t *)tf - 1) = (uint32_t)&switchk2u;
}
break;
case T_SWITCH_TOK:
if (tf->tf_cs != KERNEL_CS) {
tf->tf_cs = KERNEL_CS;
tf->tf_ds = tf->tf_es = KERNEL_DS;
tf->tf_eflags &= ~FL_IOPL_MASK;
switchu2k = (struct trapframe *)(tf->tf_esp - (sizeof(struct trapframe) - 8));
memmove(switchu2k, tf, sizeof(struct trapframe) - 8);
*((uint32_t *)tf - 1) = (uint32_t)switchu2k;
}
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret=0;
switch (tf->tf_trapno) {
case T_PGFLT: //page fault
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. ret=%d\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. ret=%d\n", ret);
}
cprintf("killed by kernel.\n");
panic("handle user mode pgfault failed. ret=%d\n", ret);
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
#if 0
LAB3 : If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 2012011359 : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
/* LAB5 2012011359 */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
/* LAB6 2012011359 */
/* IMPORTANT FUNCTIONS:
* run_timer_list
*----------------------
* you should update your lab5 code (just add ONE or TWO lines of code):
* Every tick, you should update the system time, iterate the timers, and trigger the timers which are end to call scheduler.
* You can use one funcitons to finish all these things.
*/
ticks ++;
run_timer_list();
break;
case IRQ_OFFSET + IRQ_COM1:
//c = cons_getc();
//cprintf("serial [%03d] %c\n", c, c);
// break;
case IRQ_OFFSET + IRQ_KBD:
// There are user level shell in LAB8, so we need change COM/KBD interrupt processing.
c = cons_getc();
{
extern void dev_stdin_write(char c);
dev_stdin_write(c);
}
break;
//LAB1 CHALLENGE 1 : YOUR CODE you should modify below codes.
case T_SWITCH_TOU:
case T_SWITCH_TOK:
panic("T_SWITCH_** ??\n");
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void
trap_dispatch(struct trapframe *tf) {
char c;
int ret;
int int_num;
switch ((tf->tf_Cause & 0x0000007c) >> 2) {
case EXC_TLBL:
case EXC_TLBS:
if ((ret = tlb_miss_handler(tf)) != 0) {
print_trapframe(tf);
panic("handle TLB Miss failed. %e\n", ret);
}
break;
case EXC_SYS:
syscall();
break;
case EXC_INT:
//switch ((tf->tf_Cause & tf->tf_Status & 0x0000ff00) >> 8) {
int_num = (tf->tf_Cause & tf->tf_Status & 0x0000ff00) >> 8;
//case (1 << IRQ_TIMER):
if (int_num & (1 << IRQ_TIMER)) {
#if 0
LAB3 : If some page replacement algorithm(such as CLOCK PRA) need tick to change the priority of pages,
then you can add code here.
#endif
/* LAB1 2011011278 : STEP 3 */
/* handle the timer interrupt */
/* (1) After a timer interrupt, you should record this event using a global variable (increase it), such as ticks in kern/driver/clock.c
* (2) Every TICK_NUM cycle, you can print some info using a funciton, such as print_ticks().
* (3) Too Simple? Yes, I think so!
*/
ticks++;
if (ticks % TICK_NUM == 0) {
// print_ticks();
current -> need_resched = 1;
}
/* LAB5 2011011278 */
/* you should upate you lab1 code (just add ONE or TWO lines of code):
* Every TICK_NUM cycle, you should set current process's current->need_resched = 1
*/
/* LAB6 2011011278 */
/* IMPORTANT FUNCTIONS:
* run_timer_list
*----------------------
* you should update your lab5 code (just add ONE or TWO lines of code):
* Every tick, you should update the system time, iterate the timers, and trigger the timers which are end to call scheduler.
* You can use one funcitons to finish all these things.
*/
run_timer_list();
clock_intr();
//break;
}
else if (int_num & ((1 << IRQ_KBD) | (1 << IRQ_COM1)))
//case (1 << IRQ_KBD):
//case (1 << IRQ_COM1):
// There are user level shell in LAB8, so we need change COM/KBD interrupt processing.
{
// cprintf("serial [%03d] %c\n", c, c);
extern void dev_stdin_write(char c);
while ((c = cons_getc()) != 0)
dev_stdin_write(c);
}
//break;
else if (int_num & (1 << IRQ_ETH))
//case (1 << IRQ_ETH):
ethernet_intr();
//break;
//default:
else {
print_trapframe(tf);
panic("unknown int.\n");
}
break;
case EXC_RI:
if ((ret = ri_handler(tf)) != 0) {
print_trapframe(tf);
if (current != NULL)
do_exit(-E_KILLED);
panic("unexpected RI in kernel.\n");
}
break;
//LAB1 CHALLENGE 1 : 2011011278 you should modify below codes.
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap.\n");
do_exit(-E_KILLED);
}
// in kernel, it must be a mistake
panic("unexpected trap in kernel.\n");
}
}
static void
trap_dispatch(struct trapframe *tf) {
#ifdef DEBUG_PRINT_SYSCALL_NUM
static const char * const syscallnames[] = {
[SYS_exit] "sys_exit",
[SYS_fork] "sys_fork",
[SYS_wait] "sys_wait",
[SYS_exec] "sys_exec",
[SYS_clone] "sys_clone",
[SYS_yield] "sys_yield",
[SYS_kill] "sys_kill",
[SYS_sleep] "sys_sleep",
[SYS_gettime] "sys_gettime",
[SYS_getpid] "sys_getpid",
[SYS_brk] "sys_brk",
[SYS_mmap] "sys_mmap",
[SYS_munmap] "sys_munmap",
[SYS_shmem] "sys_shmem",
[SYS_putc] "sys_putc",
[SYS_pgdir] "sys_pgdir",
[SYS_sem_init] "sys_sem_init",
[SYS_sem_post] "sys_sem_post",
[SYS_sem_wait] "sys_sem_wait",
[SYS_sem_free] "sys_sem_free",
[SYS_sem_get_value] "sys_sem_get_value",
[SYS_event_send] "sys_event_send",
[SYS_event_recv] "sys_event_recv",
[SYS_mbox_init] "sys_mbox_init",
[SYS_mbox_send] "sys_mbox_send",
[SYS_mbox_recv] "sys_mbox_recv",
[SYS_mbox_free] "sys_mbox_free",
[SYS_mbox_info] "sys_mbox_info",
[SYS_open] "sys_open",
[SYS_close] "sys_close",
[SYS_read] "sys_read",
[SYS_write] "sys_write",
[SYS_seek] "sys_seek",
[SYS_fstat] "sys_fstat",
[SYS_fsync] "sys_fsync",
[SYS_chdir] "sys_chdir",
[SYS_getcwd] "sys_getcwd",
[SYS_mkdir] "sys_mkdir",
[SYS_link] "sys_link",
[SYS_rename] "sys_rename",
[SYS_unlink] "sys_unlink",
[SYS_getdirentry] "sys_getdirentry",
[SYS_dup] "sys_dup",
[SYS_pipe] "sys_pipe",
[SYS_mkfifo] "sys_mkfifo",
[SYS_modify_ldt] "sys_modify_ldt",
[SYS_gettimeofday] "sys_gettimeofday",
[SYS_exit_group] "sys_exit_group",
};
#endif
char c;
int ret;
switch (tf->tf_trapno) {
case T_DEBUG:
case T_BRKPT:
debug_monitor(tf);
break;
case T_PGFLT:
if ((ret = pgfault_handler(tf)) != 0) {
print_trapframe(tf);
if (current == NULL) {
panic("handle pgfault failed. %e\n", ret);
}
else {
if (trap_in_kernel(tf)) {
panic("handle pgfault failed in kernel mode. %e\n", ret);
}
cprintf("killed by kernel.\n");
do_exit(-E_KILLED);
}
}
break;
case T_SYSCALL:
#ifdef DEBUG_PRINT_SYSCALL_NUM
if (tf->tf_regs.reg_eax != SYS_write &&
tf->tf_regs.reg_eax != SYS_read &&
tf->tf_regs.reg_eax != SYS_putc)
cprintf("Syscall [%d] (%s) detected!\n", tf->tf_regs.reg_eax, syscallnames[tf->tf_regs.reg_eax]);
#endif
syscall();
break;
case IRQ_OFFSET + IRQ_TIMER:
ticks ++;
assert(current != NULL);
run_timer_list();
break;
case IRQ_OFFSET + IRQ_COM1:
case IRQ_OFFSET + IRQ_KBD:
if ((c = cons_getc()) == 13) {
debug_monitor(tf);
}
else {
extern void dev_stdin_write(char c);
dev_stdin_write(c);
}
break;
case IRQ_OFFSET + IRQ_IDE1:
case IRQ_OFFSET + IRQ_IDE2:
/* do nothing */
break;
default:
print_trapframe(tf);
if (current != NULL) {
cprintf("unhandled trap %d.\n", tf->tf_trapno);
do_exit(-E_KILLED);
}
panic("unexpected trap in kernel.\n");
}
}
