/*
* Example:
* setenv videomode video=ctfb:x:800,y:480,depth:16,mode:0,\
* pclk:30066,le:41,ri:89,up:45,lo:12,
* hs:1,vs:1,sync:100663296,vmode:0
*/
static void s3c_lcd_init(GraphicDevice *panel,
struct ctfb_res_modes *mode, int bpp)
{
uint32_t clk_divider;
struct s3c24x0_lcd *regs = s3c24x0_get_base_lcd();
/* Stop the controller. */
clrbits_le32(®s->lcdcon1, 1);
/* Calculate clock divider. */
clk_divider = (get_HCLK() / PS2KHZ(mode->pixclock)) / 1000;
clk_divider = DIV_ROUND_UP(clk_divider, 2);
if (clk_divider)
clk_divider -= 1;
/* Program LCD configuration. */
switch (bpp) {
case 16:
writel(S3CFB_LCDCON1_BPPMODE_TFT_16BPP |
S3CFB_LCDCON1_PNRMODE_TFT |
S3CFB_LCDCON1_CLKVAL(clk_divider),
®s->lcdcon1);
writel(S3CFB_LCDCON5_HWSWP | S3CFB_LCDCON5_FRM565,
®s->lcdcon5);
break;
case 24:
writel(S3CFB_LCDCON1_BPPMODE_TFT_24BPP |
S3CFB_LCDCON1_PNRMODE_TFT |
S3CFB_LCDCON1_CLKVAL(clk_divider),
®s->lcdcon1);
writel(S3CFB_LCDCON5_BPP24BL, ®s->lcdcon5);
break;
}
writel(S3CFB_LCDCON2_LINEVAL(mode->yres - 1) |
S3CFB_LCDCON2_VBPD(mode->upper_margin - 1) |
S3CFB_LCDCON2_VFPD(mode->lower_margin - 1) |
S3CFB_LCDCON2_VSPW(mode->vsync_len - 1),
®s->lcdcon2);
writel(S3CFB_LCDCON3_HBPD(mode->right_margin - 1) |
S3CFB_LCDCON3_HFPD(mode->left_margin - 1) |
S3CFB_LCDCON3_HOZVAL(mode->xres - 1),
®s->lcdcon3);
writel(S3CFB_LCDCON4_HSPW(mode->hsync_len - 1),
®s->lcdcon4);
/* Write FB address. */
writel(panel->frameAdrs >> 1, ®s->lcdsaddr1);
writel((panel->frameAdrs +
(mode->xres * mode->yres * panel->gdfBytesPP)) >> 1,
®s->lcdsaddr2);
writel(mode->xres * bpp / 16, ®s->lcdsaddr3);
/* Start the controller. */
setbits_le32(®s->lcdcon1, 1);
}
void board_video_init(GraphicDevice *pGD)
{
struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
struct s3c2410_nand * const nand = s3c2410_get_base_nand();
lcd->LCDCON1 = 0x00000378; /* CLKVAL=4, BPPMODE=16bpp, TFT, ENVID=0 */
lcd->LCDCON2 = (VBPD_320240<<24)|(LINEVAL_TFT_320240<<14)|(VFPD_320240<<6)|(VSPW_320240);
lcd->LCDCON3 = (HBPD_320240<<19)|(HOZVAL_TFT_320240<<8)|(HFPD_320240);
lcd->LCDCON4 = (MVAL<<8)|(HSPW_320240);
lcd->LCDCON5 = 0x00000f09;
lcd->LPCSEL = 0x00000000;
}
/*******************************************************************************
*
* Init video chip with common Linux graphic modes (lilo)
*/
void *video_hw_init (void)
{
struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
GraphicDevice *pGD = (GraphicDevice *)&smi;
int videomode;
unsigned long t1, hsynch, vsynch;
char *penv;
int tmp, i, bits_per_pixel;
struct ctfb_res_modes *res_mode;
struct ctfb_res_modes var_mode;
// unsigned char videoout;
/* Search for video chip */
// printf("Video: "); //by mickeyos
tmp = 0;
videomode = CFG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
if ((penv = getenv ("videomode")) != NULL) {
/* deceide if it is a string */
if (penv[0] <= '9') {
videomode = (int) simple_strtoul (penv, NULL, 16);
tmp = 1;
}
} else {
tmp = 1;
}
if (tmp) {
/* parameter are vesa modes */
/* search params */
for (i = 0; i < VESA_MODES_COUNT; i++) {
if (vesa_modes[i].vesanr == videomode)
break;
}
if (i == VESA_MODES_COUNT) {
printf ("no VESA Mode found, switching to mode 0x%x ", CFG_SYS_DEFAULT_VIDEO_MODE);
i = 0;
}
res_mode =
(struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].
resindex];
bits_per_pixel = vesa_modes[i].bits_per_pixel;
} else {
res_mode = (struct ctfb_res_modes *) &var_mode;
bits_per_pixel = video_get_params (res_mode, penv);
}
/* calculate hsynch and vsynch freq (info only) */
t1 = (res_mode->left_margin + res_mode->xres +
res_mode->right_margin + res_mode->hsync_len) / 8;
t1 *= 8;
t1 *= res_mode->pixclock;
t1 /= 1000;
hsynch = 1000000000L / t1;
t1 *=
(res_mode->upper_margin + res_mode->yres +
res_mode->lower_margin + res_mode->vsync_len);
t1 /= 1000;
vsynch = 1000000000L / t1;
/* fill in Graphic device struct */
sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
res_mode->yres, bits_per_pixel, (hsynch / 1000),
(vsynch / 1000));
// printf ("%s\n", pGD->modeIdent); //by mickeyos
pGD->winSizeX = res_mode->xres;
pGD->winSizeY = res_mode->yres;
pGD->plnSizeX = res_mode->xres;
pGD->plnSizeY = res_mode->yres;
switch (bits_per_pixel) {
case 8:
pGD->gdfBytesPP = 1;
pGD->gdfIndex = GDF__8BIT_INDEX;
break;
case 15:
pGD->gdfBytesPP = 2;
pGD->gdfIndex = GDF_15BIT_555RGB;
break;
case 16:
pGD->gdfBytesPP = 2;
pGD->gdfIndex = GDF_16BIT_565RGB;
break;
case 24:
pGD->gdfBytesPP = 3;
pGD->gdfIndex = GDF_24BIT_888RGB;
break;
}
/* statically configure settings */
pGD->winSizeX = pGD->plnSizeX = 320;
pGD->winSizeY = pGD->plnSizeY = 240;
pGD->gdfBytesPP = 2;
pGD->gdfIndex = GDF_16BIT_565RGB;
pGD->frameAdrs = LCD_VIDEO_ADDR;
pGD->memSize = VIDEO_MEM_SIZE;
board_video_init(pGD);
writel((pGD->frameAdrs >> 1), &lcd->LCDSADDR1);
/* This marks the end of the frame buffer. */
writel((((readl(&lcd->LCDSADDR1))&0x1fffff) + (pGD->winSizeX+0) * pGD->winSizeY), &lcd->LCDSADDR2);
writel((pGD->winSizeX & 0x7ff), &lcd->LCDSADDR3);
/* Clear video memory */
memset((void *)pGD->frameAdrs, 0, pGD->memSize);
/* Enable Display */
writel((readl(&lcd->LCDCON1) | 0x01), & lcd->LCDCON1); /* ENVID = 1 */
return ((void*)&smi);
}