static void __init universal_machine_init(void)
{
int err;
tl2796_gpio_setup();
universal_i2c_gpio_init();
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(I2C_GPIO_26V_BUS, i2c_gpio_26v_devs,
ARRAY_SIZE(i2c_gpio_26v_devs));
i2c_register_board_info(I2C_GPIO_HDMI_BUS, i2c_gpio_hdmi_devs,
ARRAY_SIZE(i2c_gpio_hdmi_devs));
i2c_register_board_info(I2C_GPIO_28V_BUS, i2c_gpio_28v_devs,
ARRAY_SIZE(i2c_gpio_28v_devs));
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
s3cfb_set_platdata(&fb_data);
err = camera_pin_request();
if (err)
printk(KERN_INFO "CAMERA PIN REQUEST FAILED\n");
/* Registering external camera to platform data */
/*fimc_setting.camera[0] = &camera_a;*/
fimc_setting.camera[0] = &camera_c;
s3c_fimc0_set_platdata(&fimc_setting);
s3c_fimc1_set_platdata(&fimc_setting);
s3c_fimc2_set_platdata(&fimc_setting); /* testing MIPI */
/* CSI-2 */
s3c_csis_set_platdata(NULL);
s3c_fimc_reset_camera();
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
static void __init smdkc100_machine_init(void)
{
s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
s3c_device_onenand.dev.platform_data = &s3c_onenand_data;
smdkc100_smc911x_set();
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_adc_set_platdata(&s3c_adc_platform);
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkc100_reset_camera();
/* fb */
#ifdef CONFIG_FB_S3C
s3cfb_set_platdata(&fb_data);
#endif
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
#if defined(CONFIG_PM)
s5pc1xx_pm_init();
#endif
smdk_backlight_register();
}
static void __init smdkc100_machine_init(void)
{
/* spi */
#ifdef CONFIG_SPI_S3C64XX
u32 val;
val = __raw_readl(S5PC1XX_GPBCON);
val &= ~(0xf<<12);
val |= (0x1<<12);
__raw_writel(val, S5PC1XX_GPBCON);
val = __raw_readl(S5PC1XX_GPBPUD);
val &= ~(0x3<<6);
val |= (0x2<<6);
__raw_writel(val, S5PC1XX_GPBPUD);
s3c64xx_spi_set_info(BUSNUM(0), S5PC1XX_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi0_csi));
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif
s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
s3c_device_onenand.dev.platform_data = &s3c_onenand_data;
//smdkc100_smc911x_set();
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_adc_set_platdata(&s3c_adc_platform);
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
/* pb206x i2c */
pb206x_i2c_add_bus(0, 100);
pb206x_i2c_add_bus(1, 100);
pb206x_i2c_add_bus(2, 100);
pb206x_i2c_add_bus(3, 100);
pb206x_i2c_add_bus(4, 100);
//pb206x_i2c_add_bus(5, 100);
/* i2c client */
pp876ax_i2c_client_init();
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
/* fb */
#ifdef CONFIG_FB_S3C
s3cfb_set_platdata(NULL);
#endif
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
#if defined(CONFIG_PM)
s5pc1xx_pm_init();
#endif
smdk_backlight_register();
#if defined(CONFIG_MMC_SDHCI_S3C)
s3c_sdhci_set_platdata();
#endif
smdkc100_reset_camera();
}
static void __init smdkv210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif
#ifdef CONFIG_DM9000
smdkv210_dm9000_set();
#endif
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
#ifdef CONFIG_FB_S3C
s3cfb_set_platdata(NULL);
#endif
#if defined(CONFIG_BLK_DEV_IDE_S3C)
s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
#if defined(CONFIG_S5PV210_ADCTS)
s3c_adcts_set_platdata(&s3c_adcts_cfgs);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkv210_cam0_power(1);
smdkv210_cam1_power(1);
smdkv210_mipi_cam_reset();
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
static void __init smdkc110_machine_init(void)
{
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
/* spi */
#if defined(CONFIG_SPI_CNTRLR_0)
s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
universal_wm8994_init();
universal_sdhci2_set_platdata();
#ifdef CONFIG_FB_S3C_LVDS
s3cfb_set_platdata(&lvds_data);
#endif
/* pmem */
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkc110_cam0_power(1);
smdkc110_cam1_power(1);
smdkc110_mipi_cam_power(1);
/* ipc */
s3c_ipc_set_platdata(NULL);
platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
#if defined(CONFIG_PM)
s5pc11x_pm_init();
#endif
#if defined(CONFIG_HAVE_PWM)
smdk_backlight_register();
#endif
s3c_gpio_cfgpin( AP_I2C_SCL_28V, 1 );
s3c_gpio_setpull( AP_I2C_SCL_28V, S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin( AP_I2C_SDA_28V, 1 );
s3c_gpio_setpull( AP_I2C_SDA_28V, S3C_GPIO_PULL_UP);
sec_class = class_create(THIS_MODULE, "sec");
}
static void __init smdkv210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif
#ifdef CONFIG_MTD_NAND
//s3c_device_nand.dev.platform_data = &s5p_nand_data;
#endif
#ifdef CONFIG_DM9000
smdkv210_dm9000_set();
#endif
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
/* to support system shut down */
pm_power_off = smdkv210_power_off;
#if defined(CONFIG_SPI_CNTRLR_0)
s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#ifdef CONFIG_FB_S3C_LTE480WV
s3cfb_set_platdata(<e480wv_fb_data);
#endif
#if defined(CONFIG_BLK_DEV_IDE_S3C)
s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
#if defined(CONFIG_S5PV210_ADC)
s3c_adc_set_platdata(&s3c_adc_platform);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkv210_cam0_power(1);
smdkv210_cam1_power(1);
smdkv210_mipi_cam_reset();
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_TV20
s3c_set_qos();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
#if defined(CONFIG_HAVE_PWM)
smdk_backlight_register();
#endif
}
static void __init mini210_machine_init(void)
{
arm_pm_restart = smdkc110_pm_restart;
s3c_pm_init();
mini210_wifi_init();
#ifdef CONFIG_DM9000
mini210_dm9000_init();
#endif
platform_add_devices(mini210_devices, ARRAY_SIZE(mini210_devices));
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
#ifdef CONFIG_KEYBOARD_SAMSUNG
samsung_keypad_set_platdata(&mini210_keypad_data);
#endif
#ifdef CONFIG_TOUCHSCREEN_S3C2410
s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
#ifdef CONFIG_TOUCHSCREEN_GOODIX
if (mini210_get_ctp() == CTP_GT80X) {
i2c2_data.frequency = 260*1000;
}
#endif
s3c_i2c2_set_platdata(&i2c2_data);
i2c_register_board_info(0, mini210_i2c_devs0,
ARRAY_SIZE(mini210_i2c_devs0));
i2c_register_board_info(1, mini210_i2c_devs1,
ARRAY_SIZE(mini210_i2c_devs1));
i2c_register_board_info(2, mini210_i2c_devs2,
ARRAY_SIZE(mini210_i2c_devs2));
#ifdef CONFIG_TOUCHSCREEN_EGALAX
i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
#endif
#ifdef CONFIG_S5PV210_SETUP_IDE
s3c_ide_set_platdata(&mini210_ide_pdata);
#endif
#ifdef CONFIG_FB_S3C_MINI210
{
struct s3cfb_lcd *mlcd = mini210_get_lcd();
if (!(mlcd->args & 0x0f)) {
if (readl(S5PV210_GPF0_BASE + 0x184) & 0x10)
mlcd->args |= (1 << 7);
}
mini210_fb_data.lcd = mlcd;
s3c_fb_set_platdata(&mini210_fb_data);
}
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_sdhci0_set_platdata(&mini210_hsmmc0_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_sdhci1_set_platdata(&mini210_hsmmc1_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_sdhci2_set_platdata(&mini210_hsmmc2_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_sdhci3_set_platdata(&mini210_hsmmc3_pdata);
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat_lsi);
s3c_fimc1_set_platdata(&fimc_plat_lsi);
s3c_fimc2_set_platdata(&fimc_plat_lsi);
#ifdef CONFIG_VIDEO_S5K4BA
#ifdef CAM_ITU_CH_A
smdkv210_cam0_power(1);
#else
smdkv210_cam1_power(1);
#endif
#endif
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
s3c_csis_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_JPEG_V2
s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
/* spi */
#ifdef CONFIG_SPI_S3C64XX
if (!gpio_request(S5PV210_GPB(1), "SPI_CS0")) {
gpio_direction_output(S5PV210_GPB(1), 1);
s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(1));
s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
s5pv210_spi_set_info(0, S5PV210_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi0_csi));
}
if (!gpio_request(S5PV210_GPB(5), "SPI_CS1")) {
gpio_direction_output(S5PV210_GPB(5), 1);
s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(1));
s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
s5pv210_spi_set_info(1, S5PV210_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi1_csi));
}
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif
mini210_otg_init();
mini210_ehci_init();
mini210_ohci_init();
clk_xusbxti.rate = 24000000;
regulator_has_full_constraints();
mini210_setup_clocks();
/* write something into the INFORM6 register that we can use to
* differentiate an unclear reboot from a clean reboot (which
* writes a small integer code to INFORM6).
*/
__raw_writel(0xee, S5P_INFORM6);
}
static void __init mid_machine_init(void) {
s3c_pm_init();
sound_init();
mid_audio_jack_init();
mid_dm9000_init();
platform_add_devices(mid_devices, ARRAY_SIZE(mid_devices));
pm_power_off = mid_power_off;
arm_pm_restart = mid_pm_restart;
// Read configuration
mid_init_cfg();
mid_gpio_init();
// Setup devices
mid_detect_lcd();
mid_detect_camera();
mid_detect_i2cdevs();
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
s3c_adc_set_platdata(&s3c_adc_platform);
s3c_nand_set_platdata(&mid_nand_info);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, mid_i2c_devs0,
ARRAY_SIZE(mid_i2c_devs0));
i2c_register_board_info(1, mid_i2c_devs1,
ARRAY_SIZE(mid_i2c_devs1));
i2c_register_board_info(2, mid_i2c_devs2,
ARRAY_SIZE(mid_i2c_devs2));
s3c_fb_set_platdata(&mid_fb_data);
s3c_ehci_set_platdata(&mid_ehci_pdata);
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_sdhci0_set_platdata(&s5pv210_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&s5pv210_hsmmc1_pdata);
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat_lsi);
s3c_fimc1_set_platdata(&fimc_plat_lsi);
s3c_fimc2_set_platdata(&fimc_plat_lsi);
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
s3c_csis_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_JPEG_V2
s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_MFD_MAX8998
regulator_has_full_constraints();
#endif
mid_usbhost_setpower(1);
}
