static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
static void __init smdkc100_machine_init(void)
{
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
s3c_ide_set_platdata(&smdkc100_ide_pdata);
samsung_keypad_set_platdata(&smdkc100_keypad_data);
s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
/* LCD init */
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
// s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
//jkeqiang
s3c_nand_set_platdata(&ok6410_nand_info);
s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
//gpio_request(S3C64XX_GPN(5), "LCD power");
//gpio_request(S3C64XX_GPF(13), "LCD power");
//gpio_request(S3C64XX_GPF(15), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
static void __init smartq7_machine_init(void)
{
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
static void __init anw6410_machine_init(void)
{
s3c_fb_set_platdata(&anw6410_lcd_pdata);
gpio_request(S3C64XX_GPF(1), "panel power");
gpio_request(S3C64XX_GPF(4), "LCD backlight");
anw6410_dm9000_enable();
platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
}
static void __init goni_machine_init(void)
{
/* Radio: call before I2C 1 registeration */
goni_radio_init();
/* I2C0 */
s3c_i2c0_set_platdata(NULL);
/* I2C1 */
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
/* TSP: call before I2C 2 registeration */
goni_tsp_init();
/* I2C2 */
s3c_i2c2_set_platdata(&i2c2_data);
i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
/* PMIC */
goni_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
ARRAY_SIZE(i2c_gpio_pmic_devs));
/* SDHCI */
goni_setup_sdhci();
/* SOUND */
goni_sound_init();
i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
ARRAY_SIZE(i2c_gpio5_devs));
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
/* FIMC */
s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
&s5p_device_fimc_md);
goni_camera_init();
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
/* KEYPAD */
samsung_keypad_set_platdata(&keypad_data);
clk_xusbxti.rate = 24000000;
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
static void __init ok6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&ok6410_lcd_pdata);
s3c_hsotg_set_platdata(&ok6410_hsotg_pdata);
samsung_keypad_set_platdata(&ok6410_keypad_data);
s3c_nand_set_platdata(&ok6410_nand_info);
s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&ok6410_ide_pdata);
samsung_bl_set(&ok6410_bl_gpio_info, &ok6410_bl_data);
platform_add_devices(ok6410_devices, ARRAY_SIZE(ok6410_devices));
/* enable USB phy clock */
s5p_usb_phy_init(&s3c_device_usb_hsotg, USB_PHY_TYPE_DEVICE);
}
static void __init smdk6410_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
gpio_request(S3C64XX_GPF(15), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
static void __init smdkc100_machine_init(void)
{
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
static void __init hmt_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_fb_set_platdata(&hmt_lcd_pdata);
s3c_nand_set_platdata(&hmt_nand_info);
gpio_request(S3C64XX_GPC(7), "usb power");
gpio_direction_output(S3C64XX_GPC(7), 0);
gpio_request(S3C64XX_GPM(0), "usb power");
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_request(S3C64XX_GPK(7), "usb power");
gpio_direction_output(S3C64XX_GPK(7), 1);
gpio_request(S3C64XX_GPF(13), "usb power");
gpio_direction_output(S3C64XX_GPF(13), 1);
platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
s3c24xx_ts_set_platdata(NULL);
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
static void __init aquila_machine_init(void)
{
/* PMIC */
aquila_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
ARRAY_SIZE(i2c_gpio_pmic_devs));
/* SDHCI */
aquila_setup_sdhci();
s3c_fimc_setname(0, "s5p-fimc");
s3c_fimc_setname(1, "s5p-fimc");
s3c_fimc_setname(2, "s5p-fimc");
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
}
static void __init smdk6440_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
i2c_register_board_info(0, smdk6440_i2c_devs0,
ARRAY_SIZE(smdk6440_i2c_devs0));
i2c_register_board_info(1, smdk6440_i2c_devs1,
ARRAY_SIZE(smdk6440_i2c_devs1));
samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
s5p6440_set_lcd_interface();
s3c_fb_set_platdata(&smdk6440_lcd_pdata);
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
static void __init crag6410_machine_init(void)
{
/* Open drain IRQs need pullups */
s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
gpio_request(S3C64XX_GPB(0), "LCD power");
gpio_direction_output(S3C64XX_GPB(0), 0);
gpio_request(S3C64XX_GPF(14), "LCD PWM");
gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
gpio_request(S3C64XX_GPB(1), "SD power");
gpio_direction_output(S3C64XX_GPB(1), 0);
gpio_request(S3C64XX_GPF(10), "nRESETSEL");
gpio_direction_output(S3C64XX_GPF(10), 1);
s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
s3c_i2c0_set_platdata(&i2c0_pdata);
s3c_i2c1_set_platdata(&i2c1_pdata);
s3c_fb_set_platdata(&crag6410_lcd_pdata);
dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
s3c64xx_spi0_set_platdata(NULL, 0, 2);
pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
gpio_led_register_device(-1, &gpio_leds_pdata);
regulator_has_full_constraints();
s3c64xx_pm_init();
}
static void __init jet_machine_init(void)
{
s3c_pm_init();
s3c_init_gpio(jet_gpio_table, ARRAY_SIZE(jet_gpio_table));
/* Register I2C devices */
s3c_i2c0_set_platdata(&jet_misc_i2c);
i2c_register_board_info(jet_misc_i2c.bus_num, jet_misc_i2c_devs,
ARRAY_SIZE(jet_misc_i2c_devs));
s3c_i2c1_set_platdata(&jet_cam_i2c);
i2c_register_board_info(jet_cam_i2c.bus_num, jet_cam_i2c_devs,
ARRAY_SIZE(jet_cam_i2c_devs));
i2c_register_board_info(jet_pmic_i2c.id, jet_pmic_i2c_devs,
ARRAY_SIZE(jet_pmic_i2c_devs));
i2c_register_board_info(jet_audio_i2c.id, jet_audio_i2c_devs,
ARRAY_SIZE(jet_audio_i2c_devs));
i2c_register_board_info(jet_touch_i2c.id, jet_touch_i2c_devs,
ARRAY_SIZE(jet_touch_i2c_devs));
s3c_fb_set_platdata(&jet_lcd_pdata);
s3c_sdhci0_set_platdata(&jet_hsmmc0_pdata);
s3c_sdhci2_set_platdata(&jet_hsmmc2_pdata);
samsung_keypad_set_platdata(&jet_keypad_pdata);
s3c_set_platdata(&jet_onenand_pdata, sizeof(jet_onenand_pdata),
&s3c_device_onenand);
/* Register platform devices */
platform_add_devices(jet_devices, ARRAY_SIZE(jet_devices));
platform_add_devices(jet_mod_devices, ARRAY_SIZE(jet_mod_devices));
#ifdef CONFIG_ANDROID_PMEM
/* Register PMEM devices */
jet_add_mem_devices();
#endif
regulator_has_full_constraints();
}
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
/* masked by zjh */
//smdkv210_dm9000_init();
/* add by zjh */
s3c_nand_setname("s5pv210-nand");
s3c_nand_set_platdata(&smdk_nand_info);
s5pv210_nand_gpio_cfg();
gpio_request(S5PV210_GPD0(1),"beeper");
s3c_gpio_cfgpin(S5PV210_GPD0(1), S3C_GPIO_SFN(2));
gpio_free(S5PV210_GPD0(1));
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
static void __init smdk2416_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_fb_set_platdata(&smdk2416_fb_platdata);
s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
gpio_request(S3C2410_GPB(4), "USBHost Power");
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_request(S3C2410_GPB(3), "Display Power");
gpio_direction_output(S3C2410_GPB(3), 1);
gpio_request(S3C2410_GPB(1), "Display Reset");
gpio_direction_output(S3C2410_GPB(1), 1);
platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
smdk_machine_init();
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
gpio_request(S3C64XX_GPF(15), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
/**************Add by Webee*******************/
#ifdef CONFIG_S5P_DEV_USB_EHCI
s5p_ehci_set_platdata(&s5p_ehci_platdata);
#endif
#ifdef CONFIG_S5P_DEV_USB_OHCI
s5p_ohci_set_platdata(&s5p_ohci_platdata);
#endif
/**************Add by Webee*******************/
//smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
static void __init mini210_machine_init(void)
{
arm_pm_restart = smdkc110_pm_restart;
s3c_pm_init();
mini210_wifi_init();
#ifdef CONFIG_DM9000
mini210_dm9000_init();
#endif
platform_add_devices(mini210_devices, ARRAY_SIZE(mini210_devices));
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
#ifdef CONFIG_KEYBOARD_SAMSUNG
samsung_keypad_set_platdata(&mini210_keypad_data);
#endif
#ifdef CONFIG_TOUCHSCREEN_S3C2410
s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
#ifdef CONFIG_TOUCHSCREEN_GOODIX
if (mini210_get_ctp() == CTP_GT80X) {
i2c2_data.frequency = 260*1000;
}
#endif
s3c_i2c2_set_platdata(&i2c2_data);
i2c_register_board_info(0, mini210_i2c_devs0,
ARRAY_SIZE(mini210_i2c_devs0));
i2c_register_board_info(1, mini210_i2c_devs1,
ARRAY_SIZE(mini210_i2c_devs1));
i2c_register_board_info(2, mini210_i2c_devs2,
ARRAY_SIZE(mini210_i2c_devs2));
#ifdef CONFIG_TOUCHSCREEN_EGALAX
i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
#endif
#ifdef CONFIG_S5PV210_SETUP_IDE
s3c_ide_set_platdata(&mini210_ide_pdata);
#endif
#ifdef CONFIG_FB_S3C_MINI210
{
struct s3cfb_lcd *mlcd = mini210_get_lcd();
if (!(mlcd->args & 0x0f)) {
if (readl(S5PV210_GPF0_BASE + 0x184) & 0x10)
mlcd->args |= (1 << 7);
}
mini210_fb_data.lcd = mlcd;
s3c_fb_set_platdata(&mini210_fb_data);
}
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_sdhci0_set_platdata(&mini210_hsmmc0_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_sdhci1_set_platdata(&mini210_hsmmc1_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_sdhci2_set_platdata(&mini210_hsmmc2_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_sdhci3_set_platdata(&mini210_hsmmc3_pdata);
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat_lsi);
s3c_fimc1_set_platdata(&fimc_plat_lsi);
s3c_fimc2_set_platdata(&fimc_plat_lsi);
#ifdef CONFIG_VIDEO_S5K4BA
#ifdef CAM_ITU_CH_A
smdkv210_cam0_power(1);
#else
smdkv210_cam1_power(1);
#endif
#endif
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
s3c_csis_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_JPEG_V2
s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
/* spi */
#ifdef CONFIG_SPI_S3C64XX
if (!gpio_request(S5PV210_GPB(1), "SPI_CS0")) {
gpio_direction_output(S5PV210_GPB(1), 1);
s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(1));
s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
s5pv210_spi_set_info(0, S5PV210_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi0_csi));
}
if (!gpio_request(S5PV210_GPB(5), "SPI_CS1")) {
gpio_direction_output(S5PV210_GPB(5), 1);
s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(1));
s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
s5pv210_spi_set_info(1, S5PV210_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi1_csi));
}
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif
mini210_otg_init();
mini210_ehci_init();
mini210_ohci_init();
clk_xusbxti.rate = 24000000;
regulator_has_full_constraints();
mini210_setup_clocks();
/* write something into the INFORM6 register that we can use to
* differentiate an unclear reboot from a clean reboot (which
* writes a small integer code to INFORM6).
*/
__raw_writel(0xee, S5P_INFORM6);
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
//s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c_nand_set_platdata(&ok6410_nand_info); // gjl
s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
//gpio_request(S3C64XX_GPN(5), "LCD power");
//gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
//s3c_ide_set_platdata(&smdk6410_ide_pdata);
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
s3c64xx_spi_set_info(0,0,3);
s3c64xx_spi_set_info(1,0,2);
//printk(KERN_INFO "SPI: Only Register Bus number 1, spidev for test\n");
spi_register_board_info(forlinx6410_mc251x_info,ARRAY_SIZE(forlinx6410_mc251x_info));
spi_register_board_info(spi_eeprom,ARRAY_SIZE(spi_eeprom));
samsung_keypad_set_platdata(&smdk6410_keypad_data);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
printk(KERN_INFO "Adding SPI infomation, Check SPI register v10\n");
printk(KERN_INFO "SPI: FPGA initialize....\n");
setup_spi_fpga();
}
static void __init mid_machine_init(void) {
s3c_pm_init();
sound_init();
mid_audio_jack_init();
mid_dm9000_init();
platform_add_devices(mid_devices, ARRAY_SIZE(mid_devices));
pm_power_off = mid_power_off;
arm_pm_restart = mid_pm_restart;
// Read configuration
mid_init_cfg();
mid_gpio_init();
// Setup devices
mid_detect_lcd();
mid_detect_camera();
mid_detect_i2cdevs();
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
s3c_adc_set_platdata(&s3c_adc_platform);
s3c_nand_set_platdata(&mid_nand_info);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, mid_i2c_devs0,
ARRAY_SIZE(mid_i2c_devs0));
i2c_register_board_info(1, mid_i2c_devs1,
ARRAY_SIZE(mid_i2c_devs1));
i2c_register_board_info(2, mid_i2c_devs2,
ARRAY_SIZE(mid_i2c_devs2));
s3c_fb_set_platdata(&mid_fb_data);
s3c_ehci_set_platdata(&mid_ehci_pdata);
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_sdhci0_set_platdata(&s5pv210_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&s5pv210_hsmmc1_pdata);
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat_lsi);
s3c_fimc1_set_platdata(&fimc_plat_lsi);
s3c_fimc2_set_platdata(&fimc_plat_lsi);
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
s3c_csis_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_JPEG_V2
s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_MFD_MAX8998
regulator_has_full_constraints();
#endif
mid_usbhost_setpower(1);
}
static void __init mini6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
#ifdef CONFIG_S3C_DEV_I2C1
s3c_i2c1_set_platdata(NULL);
#endif
s3c_fb_set_platdata(&mini6410_lcd_pdata);
#ifdef CONFIG_SAMSUNG_DEV_TS
s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif
#ifdef CONFIG_TOUCHSCREEN_MINI6410
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
s3c_sdhci0_set_platdata(&mini6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
#ifdef CONFIG_MTD_NAND_S3C
s3c_device_nand.name = "s3c6410-nand";
#endif
s3c_nand_set_platdata(&mini6410_nand_info);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
gpio_request(S3C64XX_GPF(15), "LCD power");
if (ARRAY_SIZE(i2c_devs0)) {
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
}
if (ARRAY_SIZE(i2c_devs1)) {
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
}
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); //GPIO resource MAP
if ((platform_device_register(&mini6410_leds))!=0)
printk( "Failed to register LEDs.\n");
else
printk( "LEDs initialized.\n");
#ifdef CONFIG_VIDEO_SAMSUNG
create_proc_read_entry("videomem", 0, NULL, s3c_media_read_proc, NULL);
#endif
}
