static int
sbus_probe(device_t dev)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *sdi;
struct sbus_ranges *range;
struct resource *res;
device_t cdev;
bus_addr_t phys;
bus_size_t size;
char *name, *cname, *t;
phandle_t child, node = nexus_get_node(dev);
u_int64_t mr;
int intr, clock, rid, vec, i;
t = nexus_get_device_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(nexus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
if ((sc->sc_nreg = OF_getprop_alloc(node, "reg", sizeof(*sc->sc_reg),
(void **)&sc->sc_reg)) == -1) {
panic("sbus_probe: error getting reg property");
}
if (sc->sc_nreg < 1)
panic("sbus_probe: bogus properties");
phys = UPA_REG_PHYS(&sc->sc_reg[0]);
size = UPA_REG_SIZE(&sc->sc_reg[0]);
rid = 0;
sc->sc_sysio_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE);
if (sc->sc_sysio_res == NULL ||
rman_get_start(sc->sc_sysio_res) != phys)
panic("sbus_probe: can't allocate device memory");
sc->sc_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_sysio_res);
if (OF_getprop(node, "interrupts", &intr, sizeof(intr)) == -1)
panic("sbus_probe: cannot get IGN");
sc->sc_ign = intr & INTMAP_IGN_MASK; /* Find interrupt group no */
sc->sc_cbustag = sbus_alloc_bustag(sc);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &clock, sizeof(clock)) == -1)
clock = 25000000;
sc->sc_clockfreq = clock;
clock /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", clock / 1000, clock % 1000);
sc->sc_dmatag = nexus_get_dmatag(dev);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, &sc->sc_cdmatag) != 0)
panic("bus_dma_tag_create failed");
/* Customize the tag */
sc->sc_cdmatag->cookie = sc;
sc->sc_cdmatag->dmamap_create = sbus_dmamap_create;
sc->sc_cdmatag->dmamap_destroy = sbus_dmamap_destroy;
sc->sc_cdmatag->dmamap_load = sbus_dmamap_load;
sc->sc_cdmatag->dmamap_unload = sbus_dmamap_unload;
sc->sc_cdmatag->dmamap_sync = sbus_dmamap_sync;
sc->sc_cdmatag->dmamem_alloc = sbus_dmamem_alloc;
sc->sc_cdmatag->dmamem_free = sbus_dmamem_free;
/* XXX: register as root dma tag (kluge). */
sparc64_root_dma_tag = sc->sc_cdmatag;
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property",
device_get_name(dev));
}
sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
M_DEVBUF, M_NOWAIT);
if (sc->sc_rd == NULL)
panic("sbus_probe: could not allocate rmans");
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
rid = 0;
if ((res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE)) == NULL)
panic("sbus_probe: could not allocate decoded range");
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("psycho_probe: failed to set up memory rman");
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
* XXX: is the default correct?
*/
if (OF_getprop(node, "burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst = SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_bustag = sc->sc_bustag;
sc->sc_is.is_bushandle = sc->sc_bushandle;
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = NULL;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == 0)
panic("sbus_probe: couldn't malloc iommu name");
snprintf(name, 32, "%s dvma", device_get_name(dev));
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(name, &sc->sc_is, 0, -1, 1);
/* Enable the over-temperature and power-fail intrrupts. */
rid = 0;
mr = SYSIO_READ8(sc, SBR_THERM_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_ot_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get temperature interrupt");
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_overtemp, sc, &sc->sc_ot_ihand);
SYSIO_WRITE8(sc, SBR_THERM_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
rid = 0;
mr = SYSIO_READ8(sc, SBR_POWER_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_pf_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get power fail interrupt");
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_pwrfail, sc, &sc->sc_pf_ihand);
SYSIO_WRITE8(sc, SBR_POWER_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle, SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
* `specials' is an array of device names that are treated
* specially:
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((OF_getprop_alloc(child, "name", 1, (void **)&cname)) == -1)
continue;
if ((sdi = sbus_setup_dinfo(sc, child, cname)) == NULL) {
device_printf(dev, "<%s>: incomplete\n", cname);
free(cname, M_OFWPROP);
continue;
}
if ((cdev = device_add_child(dev, NULL, -1)) == NULL)
panic("sbus_probe: device_add_child failed");
device_set_ivars(cdev, sdi);
}
return (0);
}
static int
sbus_attach(device_t dev)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct sbus_icarg *sica;
struct sbus_ranges *range;
struct resource *res;
struct resource_list *rl;
device_t cdev;
bus_addr_t intrclr, intrmap, phys;
bus_size_t size;
u_long vec;
phandle_t child, node;
uint32_t prop;
int i, j;
sc = device_get_softc(dev);
sc->sc_dev = dev;
node = ofw_bus_get_node(dev);
i = 0;
sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
RF_ACTIVE);
if (sc->sc_sysio_res == NULL)
panic("%s: cannot allocate device memory", __func__);
if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1)
panic("%s: cannot get IGN", __func__);
sc->sc_ign = INTIGN(prop);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
prop = 25000000;
sc->sc_clockfreq = prop;
prop /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000);
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property", __func__);
}
sc->sc_rd = malloc(sizeof(*sc->sc_rd) * sc->sc_nrange, M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sc->sc_rd == NULL)
panic("%s: cannot allocate rmans", __func__);
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
j = resource_list_add_next(rl, SYS_RES_MEMORY, phys,
phys + size - 1, size);
if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j,
RF_ACTIVE)) == NULL)
panic("%s: cannot allocate decoded range", __func__);
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("%s: failed to set up memory rman", __func__);
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
*/
if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst =
(SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS);
sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res);
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = 0;
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1);
/* Create the DMA tag. */
if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr,
0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
panic("%s: bus_dma_tag_create failed", __func__);
/* Customize the tag. */
sc->sc_cdmatag->dt_cookie = &sc->sc_is;
sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
/*
* Hunt through all the interrupt mapping regs and register our
* interrupt controller for the corresponding interrupt vectors.
* We do this early in order to be able to catch stray interrupts.
*/
for (i = 0; i <= SBUS_MAX_INO; i++) {
if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0)
continue;
sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
if (sica == NULL)
panic("%s: could not allocate interrupt controller "
"argument", __func__);
sica->sica_sc = sc;
sica->sica_map = intrmap;
sica->sica_clr = intrclr;
#ifdef SBUS_DEBUG
device_printf(dev,
"intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO",
(u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap),
(u_long)intrclr);
#endif
j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i),
&sbus_ic, sica);
if (j != 0)
device_printf(dev, "could not register interrupt "
"controller for INO %d (%d)\n", i, j);
}
/* Enable the over-temperature and power-fail interrupts. */
i = 4;
sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_ot_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_BRIDGE,
NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0)
panic("%s: failed to set up temperature interrupt", __func__);
i = 3;
sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_pf_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_BRIDGE,
NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0)
panic("%s: failed to set up power fail interrupt", __func__);
/* Initialize the counter-timer. */
sparc64_counter_init(device_get_nameunit(dev),
rman_get_bustag(sc->sc_sysio_res),
rman_get_bushandle(sc->sc_sysio_res), SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
continue;
/*
* For devices where there are variants that are actually
* split into two SBus devices (as opposed to the first
* half of the device being a SBus device and the second
* half hanging off of the first one) like 'auxio' and
* 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
* which is a prerequisite to the driver attaching to the
* second one with a lower order. Saves us from dealing
* with different probe orders in the respective device
* drivers which generally is more hackish.
*/
cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
if (cdev == NULL) {
device_printf(dev,
"<%s>: device_add_child_ordered failed\n",
sdi->sdi_obdinfo.obd_name);
sbus_destroy_dinfo(sdi);
continue;
}
device_set_ivars(cdev, sdi);
}
return (bus_generic_attach(dev));
}
