static void __init tegra_asymptote_init(void)
{
struct clk *c, *p;
seaboard_audio_pdata.gpio_hp_invert = 0;
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_B();
seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;
asymptote_common_init();
/* asymptote has same memory config as seaboard (for now) */
seaboard_emc_init();
/* Temporary hack to keep eMMC controller at 24MHz */
c = tegra_get_clock_by_name("sdmmc4");
p = tegra_get_clock_by_name("pll_p");
if (c && p) {
clk_set_parent(c, p);
clk_set_rate(c, 24000000);
clk_enable(c);
}
asymptote_i2c_register_devices();
/* The tsl2563 ALS on Asymptote doesn't play nice with a 400kHz bus */
seaboard_i2c1_platform_data.bus_clk_rate[0] = 100000;
seaboard_i2c_init();
}
static void __init tegra_wario_init(void)
{
struct clk *c, *p;
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_B();
seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;
seaboard_common_init();
/* wario has same memory config as seaboard */
seaboard_emc_init();
/* Temporary hack to keep eMMC controller at 24MHz */
c = tegra_get_clock_by_name("sdmmc4");
p = tegra_get_clock_by_name("pll_p");
if (c && p) {
clk_set_parent(c, p);
clk_set_rate(c, 24000000);
clk_enable(c);
}
wario_i2c_register_devices();
seaboard_i2c_init();
}
static void __init tegra_aebl_init(void)
{
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_B();
/* Enable RF for 3G modem */
tegra_gpio_enable(TEGRA_GPIO_W_DISABLE);
gpio_request(TEGRA_GPIO_W_DISABLE, "w_disable");
gpio_direction_output(TEGRA_GPIO_W_DISABLE, 1);
tegra_gpio_enable(TEGRA_GPIO_BATT_DETECT);
bq20z75_pdata.battery_detect = TEGRA_GPIO_BATT_DETECT;
/* battery present is low */
bq20z75_pdata.battery_detect_present = 0;
seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;
/* setting skew makes WIFI stable when sdmmc1 runs 48MHz. */
tegra_set_clock_readskew("sdmmc1", 8);
aebl_common_init();
aebl_emc_init();
aebl_i2c_register_devices();
seaboard_i2c_init();
aebl_sensors_init();
legacy_arm_pm_restart = arm_pm_restart;
arm_pm_restart = gpio_machine_restart;
}
static void __init tegra_wario_init(void)
{
/* Wario uses UARTB for the debug port. */
debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_common_init();
seaboard_i2c_init();
}
static void __init tegra_seaboard_init(void)
{
/* Seaboard uses UARTD for the debug port. */
debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
debug_uart_platform_data[0].irq = INT_UARTD;
tegra_soc_device_init("seaboard");
seaboard_common_init();
seaboard_i2c_init();
}
static void __init tegra_seaboard_init(void)
{
debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
debug_uart_platform_data[0].irq = INT_UARTD;
seaboard_common_init();
seaboard_i2c_init();
}
static void __init tegra_arthur_init(void)
{
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_B();
seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;
seaboard_common_init();
arthur_i2c_register_devices();
seaboard_i2c_init();
}
static void __init tegra_kaen_init(void)
{
/* Kaen uses UARTB for the debug port. */
debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
tegra_soc_device_init("kaen");
seaboard_common_init();
seaboard_i2c_init();
}
static void __init tegra_kaen_init(void)
{
debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
seaboard_common_init();
seaboard_i2c_init();
}
static void __init tegra_seaboard_init(void)
{
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_D();
seaboard_common_init();
seaboard_emc_init();
seaboard_i2c_register_devices();
seaboard_i2c_init();
seaboard_sensors_init();
}
void __init tegra_ventana_init(void)
{
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_D();
seaboard_gpio_keys_device.dev.platform_data = &ventana_keys_data;
ventana_common_init();
seaboard_panel_init();
ventana_emc_init();
seaboard_i2c_register_devices();
seaboard_i2c_init();
}
static void __init tegra_kaen_init(void)
{
tegra_init_suspend(&seaboard_suspend);
__init_debug_uart_B();
/* Enable RF for 3G modem */
tegra_gpio_enable(TEGRA_GPIO_W_DISABLE);
gpio_request(TEGRA_GPIO_W_DISABLE, "w_disable");
gpio_direction_output(TEGRA_GPIO_W_DISABLE, 1);
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
tegra_gpio_enable(TEGRA_GPIO_BATT_DETECT);
bq20z75_pdata.battery_detect = TEGRA_GPIO_BATT_DETECT;
/* battery present is low */
bq20z75_pdata.battery_detect_present = 0;
seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;
/* setting skew makes WIFI stable when sdmmc1 runs 48MHz. */
tegra_set_clock_readskew("sdmmc1", 8);
/* change xcvr_setup to 13 to adjust USB driving to pass eye
* diagram test.
* xcvr_effect is only for USB1 to set FUSE_SETUP_SEL to zero
*/
usb1_phy_config.xcvr_effect = 1;
usb1_phy_config.xcvr_setup = 13;
usb3_phy_config.xcvr_setup = 13;
kaen_common_init();
kaen_emc_init();
kaen_i2c_register_devices();
seaboard_i2c_init();
kaen_sensors_init();
legacy_arm_pm_restart = arm_pm_restart;
arm_pm_restart = gpio_machine_restart;
}
