char *internalDoScanningOperation(char *uuid, char *lang) {
int request_resolution = 0;
int docid;
int current_page = 0;
int total_requested_pages;
double totbytes = 0;
SANE_Status status;
SANE_Handle *openDeviceHandle;
SANE_Byte *raw_image;
SANE_Parameters pars;
char *docid_s;
char *total_requested_pages_s;
char *devName;
char *outFilename;
char *raw_image_format;
char *header;
o_log(DEBUGM, "doScanningOperation: sane initialized uuid(%s)",(char *)uuid);
updateScanProgress(uuid, SCAN_WAITING_ON_SCANNER, 0);
// Open the device
devName = getScanParam(uuid, SCAN_PARAM_DEVNAME);
o_log(DEBUGM, "sane_open of \"%s\"",devName);
status = sane_open ((SANE_String_Const) devName, (SANE_Handle)&openDeviceHandle);
if(status != SANE_STATUS_GOOD) {
handleSaneErrors("Cannot open device ", devName, status, 0);
updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
free(devName);
return 0;
}
free(devName);
/* ========================================================== */
if ( ! setOptions( (char *)uuid, openDeviceHandle, &request_resolution ) )
return 0;
o_log(DEBUGM, "sane_start: setOptions returned request_resolution %d\n",request_resolution);
int timeout = 5;
while( 0 < timeout ) {
status = sane_start (openDeviceHandle);
if(status == SANE_STATUS_GOOD) {
break;
}
else {
if(status == SANE_STATUS_DEVICE_BUSY ) {
// BUSY signal could be the scanner just having a
// bit of lag - specially network connected devices
timeout--;
if ( timeout == 0 ) {
handleSaneErrors("Cannot start scanning", "even after trying several time", status, 0);
updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
return 0;
}
else {
o_log(WARNING, "Device reports not ready to 'start', waiting 500ms. Will try another %d times", timeout);
usleep(500 * 1000); // 500ms or 0.5sec
}
}
else {
handleSaneErrors("Cannot start scanning", "", status, 0);
updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
return 0;
}
}
}
// Get scanning params (from the scanner)
if( request_resolution == 0 ) {
o_log(DEBUGM, "Resolution did not get set in scanner setup.");
updateScanProgress(uuid, SCAN_INTERNAL_ERROR, 10004);
return 0;
}
o_log(DEBUGM, "Get scanning params");
status = sane_get_parameters (openDeviceHandle, &pars);
o_log(INFORMATION, "Scanner Parm : stat=%s form=%d,lf=%d,bpl=%d,pixpl=%d,lin=%d,dep=%d",
sane_strstatus (status),
pars.format, pars.last_frame,
pars.bytes_per_line, pars.pixels_per_line,
pars.lines, pars.depth);
switch (pars.format) {
case SANE_FRAME_GRAY:
o_log(DEBUGM, "Expecting Gray data (1 channel only).");
raw_image_format = o_strdup( "P5" );
break;
case SANE_FRAME_RGB:
o_log(DEBUGM, "Expecting RGB data (3 channels).");
raw_image_format = o_strdup( "P6" );
break;
default:
o_log(DEBUGM, "backend returns three frames speratly. We do not currently support this.");
updateScanProgress(uuid, SCAN_INTERNAL_ERROR, 10003);
return 0;
break;
}
header = o_printf ("%s\n# SANE data follows\n%d %d\n%d\n",
raw_image_format, pars.pixels_per_line, pars.lines,
(pars.depth <= 8) ? 255 : 65535);
free( raw_image_format );
// Save Record
//
docid_s = getScanParam(uuid, SCAN_PARAM_DOCID);
total_requested_pages_s = getScanParam(uuid, SCAN_PARAM_REQUESTED_PAGES);
total_requested_pages = atoi(total_requested_pages_s);
free(total_requested_pages_s);
if( docid_s == NULL ) {
o_log(DEBUGM, "Saving record");
updateScanProgress(uuid, SCAN_DB_WORKING, 0);
docid_s = addNewScannedDoc(pars.lines, pars.pixels_per_line, request_resolution, total_requested_pages);
setScanParam(uuid, SCAN_PARAM_DOCID, docid_s);
setScanParam(uuid, SCAN_PARAM_ON_PAGE, "1");
current_page = 1;
}
else {
char *current_page_s = getScanParam(uuid, SCAN_PARAM_ON_PAGE);
current_page = atoi(current_page_s);
free(current_page_s);
current_page++;
current_page_s = itoa(current_page, 10);
setScanParam(uuid, SCAN_PARAM_ON_PAGE, current_page_s);
free(current_page_s);
}
docid = atoi(docid_s);
free(docid_s);
totbytes = (double)((pars.bytes_per_line * pars.lines));
/* ========================================================== */
raw_image = collectData( (char *)uuid, openDeviceHandle, totbytes, pars.bytes_per_line, header );
o_log(INFORMATION, "Scanning done.");
o_log(DEBUGM, "sane_cancel");
sane_cancel(openDeviceHandle);
o_log(DEBUGM, "sane_close");
sane_close(openDeviceHandle);
// Convert Raw into JPEG
//
updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 0);
PIX *pix;
if ( ( pix = pixReadMem( raw_image, (pars.bytes_per_line*pars.lines)+strlen(header) ) ) == NULL) {
o_log(ERROR, "Could not load the image data into a PIX");
}
updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 55);
o_log(INFORMATION, "Convertion process: Loaded (depth: %d)", pixGetDepth(pix));
free(raw_image);
free(header);
outFilename = o_printf("%s/scans/%d_%d.jpg", BASE_DIR, docid, current_page);
pixWrite(outFilename, pix, IFF_JFIF_JPEG);
free(outFilename);
updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 100);
o_log(INFORMATION, "Conversion process: Complete");
// Do OCR - on this page
// - OCR libs just wants the raw data and not the image header
ocrImage( uuid, docid, current_page, request_resolution, pix, lang );
#ifdef CAN_PHASH
// Calulate the pHash, so we can compare images later
if( current_page == 1 ) {
updateScanProgress(uuid, SCAN_CALULATING_PHASH, 0);
unsigned long long hash = getImagePhash_px( pix );
savePhash( docid, hash );
}
#endif /* CAN_PHASH */
pixDestroy( &pix );
// cleaup && What should we do next
//
o_log(DEBUGM, "mostly done.");
if(current_page >= total_requested_pages)
updateScanProgress(uuid, SCAN_FINISHED, docid);
else
updateScanProgress(uuid, SCAN_WAITING_ON_NEW_PAGE, ++current_page);
o_log(DEBUGM, "Page scan done.");
return o_strdup("OK");
}
bool BLECentral::startScan(float interval, float window)
{
setScanParam(interval, window);
return BLECentralRole::instance()->startScan();
}
bool BLECentralRole::startScan(const bt_le_scan_param_t &scan_param)
{
setScanParam(scan_param);
return startScan();
}
