void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int eflags = x->e_flags;
unsigned int personality = PER_LINUX_32BIT;
/*
* APCS-26 is only valid for OABI executables
*/
if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
if (eflags & EF_ARM_APCS_26)
personality = PER_LINUX;
}
set_personality(personality);
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
if (elf_hwcap & HWCAP_IWMMXT &&
eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
set_thread_flag(TIF_USING_IWMMXT);
} else {
clear_thread_flag(TIF_USING_IWMMXT);
}
}
static void
update_personality(struct tcb *tcp, unsigned int personality)
{
if (personality == current_personality)
return;
set_personality(personality);
if (personality == tcp->currpers)
return;
tcp->currpers = personality;
# undef PERSONALITY_NAMES
# if defined X86_64
# define PERSONALITY_NAMES {"64 bit", "32 bit", "x32"}
# elif defined X32
# define PERSONALITY_NAMES {"x32", "32 bit"}
# elif SUPPORTED_PERSONALITIES == 2
# define PERSONALITY_NAMES {"64 bit", "32 bit"}
# endif
# ifdef PERSONALITY_NAMES
if (!qflag) {
static const char *const names[] = PERSONALITY_NAMES;
error_msg("[ Process PID=%d runs in %s mode. ]",
tcp->pid, names[personality]);
}
# endif
}
void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int eflags = x->e_flags;
unsigned int personality = current->personality & ~PER_MASK;
/*
* We only support Linux ELF executables, so always set the
* personality to LINUX.
*/
personality |= PER_LINUX;
/*
* APCS-26 is only valid for OABI executables
*/
if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
(eflags & EF_ARM_APCS_26))
personality &= ~ADDR_LIMIT_32BIT;
else
personality |= ADDR_LIMIT_32BIT;
set_personality(personality);
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
if (elf_hwcap & HWCAP_IWMMXT &&
eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
set_thread_flag(TIF_USING_IWMMXT);
} else {
clear_thread_flag(TIF_USING_IWMMXT);
}
}
void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int eflags = x->e_flags;
unsigned int personality = current->personality;
/*
* Inherit most personality flags from parent, except for those
* we're about to choose. Beware: PER_LINUX_32BIT carries flag bits
* outside of PER_MASK.
*/
personality &= ~(PER_MASK | PER_LINUX | PER_LINUX_32BIT);
/*
* APCS-26 is only valid for OABI executables
*/
if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
(eflags & EF_ARM_APCS_26))
personality |= PER_LINUX;
else
personality |= PER_LINUX_32BIT;
set_personality(personality);
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
if (elf_hwcap & HWCAP_IWMMXT &&
eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
set_thread_flag(TIF_USING_IWMMXT);
} else {
clear_thread_flag(TIF_USING_IWMMXT);
}
}
static void
default_handler(int segment, struct pt_regs *regp)
{
u_long pers = 0;
/*
* This may have been a static linked SVr4 binary, so we would
* have the personality set incorrectly. Or it might have been
* a Solaris/x86 binary. We can tell which because the former
* uses lcall7, while the latter used lcall 0x27.
* Try to find or load the appropriate personality, and fall back
* to just forcing a SEGV.
*
* XXX: this is IA32-specific and should be moved to the MD-tree.
*/
switch (segment) {
#ifdef __i386__
case 0x07:
pers = abi_defhandler_lcall7;
break;
case 0x27:
pers = PER_SOLARIS;
break;
#endif
}
set_personality(pers);
if (current_thread_info()->exec_domain->handler != default_handler)
current_thread_info()->exec_domain->handler(segment, regp);
else
send_sig(SIGSEGV, current, 1);
}
static u32 do_solaris_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u64 off)
{
struct file *file = NULL;
unsigned long retval, ret_type;
/* Do we need it here? */
set_personality(PER_SVR4);
if (flags & MAP_NORESERVE) {
static int cnt;
if (cnt < 5) {
printk("%s: unimplemented Solaris MAP_NORESERVE mmap() flag\n",
current->comm);
cnt++;
}
flags &= ~MAP_NORESERVE;
}
retval = -EBADF;
if(!(flags & MAP_ANONYMOUS)) {
if(fd >= SOLARIS_NR_OPEN)
goto out;
file = fget(fd);
if (!file)
goto out;
else {
struct inode * inode = file->f_path.dentry->d_inode;
if(imajor(inode) == MEM_MAJOR &&
iminor(inode) == 5) {
flags |= MAP_ANONYMOUS;
fput(file);
file = NULL;
}
}
}
retval = -EINVAL;
len = PAGE_ALIGN(len);
if(!(flags & MAP_FIXED))
addr = 0;
else if (len > STACK_TOP32 || addr > STACK_TOP32 - len)
goto out_putf;
ret_type = flags & _MAP_NEW;
flags &= ~_MAP_NEW;
down_write(¤t->mm->mmap_sem);
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
retval = do_mmap(file,
(unsigned long) addr, (unsigned long) len,
(unsigned long) prot, (unsigned long) flags, off);
up_write(¤t->mm->mmap_sem);
if(!ret_type)
retval = ((retval < STACK_TOP32) ? 0 : retval);
out_putf:
if (file)
fput(file);
out:
return (u32) retval;
}
static void
elf32_set_personality (void)
{
set_personality(PER_LINUX32);
current->thread.map_base = IA32_PAGE_OFFSET/3;
current->thread.task_size = IA32_PAGE_OFFSET; /* use what Linux/x86 uses... */
set_fs(USER_DS); /* set addr limit for new TASK_SIZE */
}
SYSCALL_DEFINE1(personality, unsigned int, personality)
{
unsigned int old = current->personality;
if (personality != 0xffffffff)
set_personality(personality);
return old;
}
static void
elf32_set_personality (void)
{
set_personality(PER_LINUX32);
current->thread.map_base = IA32_PAGE_OFFSET/3;
current->thread.task_size = IA32_PAGE_OFFSET; /* use what Linux/x86 uses... */
current->thread.flags |= IA64_THREAD_XSTACK; /* data must be executable */
set_fs(USER_DS); /* set addr limit for new TASK_SIZE */
}
static void
default_handler(int segment, struct pt_regs *regp)
{
set_personality(0);
if (current_thread_info()->exec_domain->handler != default_handler)
current_thread_info()->exec_domain->handler(segment, regp);
else
send_sig(SIGSEGV, current, 1);
}
SYSCALL_DEFINE1(personality, u_long, personality)
{
u_long old = current->personality;
if (personality != 0xffffffff) {
set_personality(personality);
if (current->personality != personality)
return -EINVAL;
}
return (long)old;
}
void
call_summary(FILE *outf)
{
unsigned int i, old_pers = current_personality;
for (i = 0; i < SUPPORTED_PERSONALITIES; ++i) {
if (!countv[i])
continue;
if (current_personality != i)
set_personality(i);
if (i)
fprintf(outf,
"System call usage summary for %d bit mode:\n",
current_wordsize * 8);
call_summary_pers(outf);
}
if (old_pers != current_personality)
set_personality(old_pers);
}
asmlinkage long
sys_personality(u_long personality)
{
u_long old = current->personality;
if (personality != 0xffffffff) {
set_personality(personality);
if (current->personality != personality)
return -EINVAL;
}
return (long)old;
}
asmlinkage long
sys_personality(u_long personality)
{
u_long old = current->personality;
if (personality == PER_QUERY)
return (long)old;
set_personality(personality);
if (get_cur_personality() != personality)
return -EINVAL;
return (long)old;
}
static void
update_personality(struct tcb *tcp, unsigned int personality)
{
if (personality == current_personality)
return;
set_personality(personality);
if (personality == tcp->currpers)
return;
tcp->currpers = personality;
# if defined(POWERPC64)
if (!qflag) {
static const char *const names[] = {"64 bit", "32 bit"};
fprintf(stderr, "[ Process PID=%d runs in %s mode. ]\n",
tcp->pid, names[personality]);
}
# elif defined(X86_64)
if (!qflag) {
static const char *const names[] = {"64 bit", "32 bit", "x32"};
fprintf(stderr, "[ Process PID=%d runs in %s mode. ]\n",
tcp->pid, names[personality]);
}
# elif defined(X32)
if (!qflag) {
static const char *const names[] = {"x32", "32 bit"};
fprintf(stderr, "[ Process PID=%d runs in %s mode. ]\n",
tcp->pid, names[personality]);
}
# elif defined(AARCH64)
if (!qflag) {
static const char *const names[] = {"32-bit", "AArch64"};
fprintf(stderr, "[ Process PID=%d runs in %s mode. ]\n",
tcp->pid, names[personality]);
}
# elif defined(TILE)
if (!qflag) {
static const char *const names[] = {"64-bit", "32-bit"};
fprintf(stderr, "[ Process PID=%d runs in %s mode. ]\n",
tcp->pid, names[personality]);
}
# endif
}
static void
lcall_autodetect_handler(int segment, struct pt_regs *regp)
{
personality_t personality = PER_LINUX;
/*
* This may have been a static linked SVr4 binary, so we would
* have the personality set incorrectly. Or it might have been
* a Solaris/x86 binary. We can tell which because the former
* uses lcall7, while the latter used lcall 0x27.
* Try to find or load the appropriate personality, and fall back
* to just forcing a SEGV.
* Try to find or load the appropriate personality on first invocation.
* If loading failed and handler is still default then raise a SEGV.
*
* XXX: this is IA32-specific and should be moved to the MD-tree.
*/
switch (segment) {
#ifdef __i386__
case 0x07:
personality = abi_defhandler_lcall7;
break;
case 0x27:
personality = PER_SOLARIS;
break;
#endif
}
set_personality(personality);
if (current_thread_info()->exec_domain->handler == lcall_autodetect_handler)
{
/* we are still at the same handler - recursing impossible! */
/* raise a segfault for the current process */
send_sig(SIGSEGV, current, 1);
}
else
{
/* identifying the needed handler at exec time succeeded. */
/* recursively call these installed handler (one level deep) */
current_thread_info()->exec_domain->handler(segment, regp);
}
}
int ckpt_restore_ext(ckpt_desc_t desc)
{
int ret;
ckpt_ext_t ext;
mm_segment_t fs;
log_restore_ext("restoring extra attributes ...");
if (ckpt_read(desc, &ext, sizeof(ckpt_ext_t)) != sizeof(ckpt_ext_t)) {
log_err("failed to read extra attributes");
return -EIO;
}
set_personality(ext.personality);
current->clear_child_tid = ext.clear_child_tid;
fs = get_fs();
set_fs(KERNEL_DS);
ret = sys_prctl(PR_SET_NAME, (unsigned long)ext.comm, 0, 0, 0);
set_fs(fs);
log_restore_pos(desc);
return ret;
}
/* These are the functions used to load ELF style executables and shared
* libraries. There is no binary dependent code anywhere else.
*/
static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
{
struct elfhdr elf_ex, interp_elf_ex;
struct file *interpreter;
struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr;
unsigned int load_addr, elf_bss, elf_brk;
unsigned int elf_entry, interp_load_addr = 0;
unsigned int start_code, end_code, end_data, elf_stack;
int retval, has_interp, has_ephdr, size, i;
char *elf_interpreter;
mm_segment_t old_fs;
load_addr = 0;
has_interp = has_ephdr = 0;
elf_ihdr = elf_ephdr = 0;
elf_ex = *((struct elfhdr *) bprm->buf);
retval = -ENOEXEC;
if (verify_binary(&elf_ex, bprm))
goto out;
#ifdef DEBUG_ELF
print_elfhdr(&elf_ex);
#endif
/* Now read in all of the header information */
size = elf_ex.e_phentsize * elf_ex.e_phnum;
if (size > 65536)
goto out;
elf_phdata = (struct elf_phdr *) kmalloc(size, GFP_KERNEL);
if (elf_phdata == NULL) {
retval = -ENOMEM;
goto out;
}
retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
if (retval < 0)
goto out_free_ph;
#ifdef DEBUG_ELF
dump_phdrs(elf_phdata, elf_ex.e_phnum);
#endif
/* Set some things for later. */
for(i = 0; i < elf_ex.e_phnum; i++) {
switch(elf_phdata[i].p_type) {
case PT_INTERP:
has_interp = 1;
elf_ihdr = &elf_phdata[i];
break;
case PT_PHDR:
has_ephdr = 1;
elf_ephdr = &elf_phdata[i];
break;
};
}
#ifdef DEBUG_ELF
printk("\n");
#endif
elf_bss = 0;
elf_brk = 0;
elf_stack = 0xffffffff;
elf_interpreter = NULL;
start_code = 0xffffffff;
end_code = 0;
end_data = 0;
retval = look_for_irix_interpreter(&elf_interpreter,
&interpreter,
&interp_elf_ex, elf_phdata, bprm,
elf_ex.e_phnum);
if (retval)
goto out_free_file;
if (elf_interpreter) {
retval = verify_irix_interpreter(&interp_elf_ex);
if(retval)
goto out_free_interp;
}
/* OK, we are done with that, now set up the arg stuff,
* and then start this sucker up.
*/
retval = -E2BIG;
if (!bprm->sh_bang && !bprm->p)
goto out_free_interp;
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
goto out_free_dentry;
/* OK, This is the point of no return */
current->mm->end_data = 0;
current->mm->end_code = 0;
current->mm->mmap = NULL;
current->flags &= ~PF_FORKNOEXEC;
elf_entry = (unsigned int) elf_ex.e_entry;
/* Do this so that we can load the interpreter, if need be. We will
* change some of these later.
*/
current->mm->rss = 0;
setup_arg_pages(bprm);
current->mm->start_stack = bprm->p;
/* At this point, we assume that the image should be loaded at
* fixed address, not at a variable address.
*/
old_fs = get_fs();
set_fs(get_ds());
map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack,
&load_addr, &start_code, &elf_bss, &end_code,
&end_data, &elf_brk);
if(elf_interpreter) {
retval = map_interpreter(elf_phdata, &interp_elf_ex,
interpreter, &interp_load_addr,
elf_ex.e_phnum, old_fs, &elf_entry);
kfree(elf_interpreter);
if(retval) {
set_fs(old_fs);
printk("Unable to load IRIX ELF interpreter\n");
send_sig(SIGSEGV, current, 0);
retval = 0;
goto out_free_file;
}
}
set_fs(old_fs);
kfree(elf_phdata);
set_personality(PER_IRIX32);
set_binfmt(&irix_format);
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
bprm->p = (unsigned long)
create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc,
(elf_interpreter ? &elf_ex : NULL),
load_addr, interp_load_addr, regs, elf_ephdr);
current->mm->start_brk = current->mm->brk = elf_brk;
current->mm->end_code = end_code;
current->mm->start_code = start_code;
current->mm->end_data = end_data;
current->mm->start_stack = bprm->p;
/* Calling set_brk effectively mmaps the pages that we need for the
* bss and break sections.
*/
set_brk(elf_bss, elf_brk);
/*
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
irix_map_prda_page ();
padzero(elf_bss);
#ifdef DEBUG_ELF
printk("(start_brk) %lx\n" , (long) current->mm->start_brk);
printk("(end_code) %lx\n" , (long) current->mm->end_code);
printk("(start_code) %lx\n" , (long) current->mm->start_code);
printk("(end_data) %lx\n" , (long) current->mm->end_data);
printk("(start_stack) %lx\n" , (long) current->mm->start_stack);
printk("(brk) %lx\n" , (long) current->mm->brk);
#endif
#if 0 /* XXX No f*****g way dude... */
/* Why this, you ask??? Well SVr4 maps page 0 as read-only,
* and some applications "depend" upon this behavior.
* Since we do not have the power to recompile these, we
* emulate the SVr4 behavior. Sigh.
*/
down_write(¤t->mm->mmap_sem);
(void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
#endif
start_thread(regs, elf_entry, bprm->p);
if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
return 0;
out:
return retval;
out_free_dentry:
allow_write_access(interpreter);
fput(interpreter);
out_free_interp:
if (elf_interpreter)
kfree(elf_interpreter);
out_free_file:
out_free_ph:
kfree (elf_phdata);
goto out;
}
/*
* load an fdpic binary into various bits of memory
*/
static int load_elf_fdpic_binary(struct linux_binprm *bprm, struct pt_regs *regs)
{
struct elf_fdpic_params exec_params, interp_params;
struct elf_phdr *phdr;
unsigned long stack_size;
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
int executable_stack;
int retval, i;
memset(&exec_params, 0, sizeof(exec_params));
memset(&interp_params, 0, sizeof(interp_params));
exec_params.hdr = *(struct elfhdr *) bprm->buf;
exec_params.flags = ELF_FDPIC_FLAG_PRESENT | ELF_FDPIC_FLAG_EXECUTABLE;
/* check that this is a binary we know how to deal with */
retval = -ENOEXEC;
if (!is_elf_fdpic(&exec_params.hdr, bprm->file))
goto error;
/* read the program header table */
retval = elf_fdpic_fetch_phdrs(&exec_params, bprm->file);
if (retval < 0)
goto error;
/* scan for a program header that specifies an interpreter */
phdr = exec_params.phdrs;
for (i = 0; i < exec_params.hdr.e_phnum; i++, phdr++) {
switch (phdr->p_type) {
case PT_INTERP:
retval = -ENOMEM;
if (phdr->p_filesz > PATH_MAX)
goto error;
retval = -ENOENT;
if (phdr->p_filesz < 2)
goto error;
/* read the name of the interpreter into memory */
interpreter_name = (char *) kmalloc(phdr->p_filesz, GFP_KERNEL);
if (!interpreter_name)
goto error;
retval = kernel_read(bprm->file,
phdr->p_offset,
interpreter_name,
phdr->p_filesz);
if (retval < 0)
goto error;
retval = -ENOENT;
if (interpreter_name[phdr->p_filesz - 1] != '\0')
goto error;
kdebug("Using ELF interpreter %s", interpreter_name);
/* replace the program with the interpreter */
interpreter = open_exec(interpreter_name);
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter)) {
interpreter = NULL;
goto error;
}
retval = kernel_read(interpreter, 0, bprm->buf, BINPRM_BUF_SIZE);
if (retval < 0)
goto error;
interp_params.hdr = *((struct elfhdr *) bprm->buf);
break;
case PT_LOAD:
#ifdef CONFIG_MMU
if (exec_params.load_addr == 0)
exec_params.load_addr = phdr->p_vaddr;
#endif
break;
}
}
if (elf_check_const_displacement(&exec_params.hdr))
exec_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* perform insanity checks on the interpreter */
if (interpreter_name) {
retval = -ELIBBAD;
if (!is_elf_fdpic(&interp_params.hdr, interpreter))
goto error;
interp_params.flags = ELF_FDPIC_FLAG_PRESENT;
/* read the interpreter's program header table */
retval = elf_fdpic_fetch_phdrs(&interp_params, interpreter);
if (retval < 0)
goto error;
}
stack_size = exec_params.stack_size;
if (stack_size < interp_params.stack_size)
stack_size = interp_params.stack_size;
if (exec_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (exec_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
retval = -ENOEXEC;
if (stack_size == 0)
goto error;
if (elf_check_const_displacement(&interp_params.hdr))
interp_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
goto error;
/* there's now no turning back... the old userspace image is dead,
* defunct, deceased, etc. after this point we have to exit via
* error_kill */
set_personality(PER_LINUX_FDPIC);
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
current->mm->end_code = 0;
current->mm->start_stack = 0;
current->mm->start_data = 0;
current->mm->end_data = 0;
current->mm->context.exec_fdpic_loadmap = 0;
current->mm->context.interp_fdpic_loadmap = 0;
current->flags &= ~PF_FORKNOEXEC;
#ifdef CONFIG_MMU
elf_fdpic_arch_lay_out_mm(&exec_params,
&interp_params,
¤t->mm->start_stack,
¤t->mm->start_brk);
#endif
/* do this so that we can load the interpreter, if need be
* - we will change some of these later
*/
set_mm_counter(current->mm, rss, 0);
#ifdef CONFIG_MMU
retval = setup_arg_pages(bprm, current->mm->start_stack, executable_stack);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
goto error_kill;
}
#endif
/* load the executable and interpreter into memory */
retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm, "executable");
if (retval < 0)
goto error_kill;
if (interpreter_name) {
retval = elf_fdpic_map_file(&interp_params, interpreter,
current->mm, "interpreter");
if (retval < 0) {
printk(KERN_ERR "Unable to load interpreter\n");
goto error_kill;
}
allow_write_access(interpreter);
fput(interpreter);
interpreter = NULL;
}
#ifdef CONFIG_MMU
if (!current->mm->start_brk)
current->mm->start_brk = current->mm->end_data;
current->mm->brk = current->mm->start_brk = PAGE_ALIGN(current->mm->start_brk);
#else
/* create a stack and brk area big enough for everyone
* - the brk heap starts at the bottom and works up
* - the stack starts at the top and works down
*/
stack_size = (stack_size + PAGE_SIZE - 1) & PAGE_MASK;
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
down_write(¤t->mm->mmap_sem);
current->mm->start_brk = do_mmap(NULL,
0,
stack_size,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANON | MAP_GROWSDOWN,
0);
if (IS_ERR((void *) current->mm->start_brk)) {
up_write(¤t->mm->mmap_sem);
retval = current->mm->start_brk;
current->mm->start_brk = 0;
goto error_kill;
}
if (do_mremap(current->mm->start_brk,
stack_size,
ksize((char *) current->mm->start_brk),
0, 0
) == current->mm->start_brk
)
stack_size = ksize((char *) current->mm->start_brk);
up_write(¤t->mm->mmap_sem);
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
current->mm->context.end_brk += (stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
current->mm->start_stack = current->mm->start_brk + stack_size;
#endif
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
if (create_elf_fdpic_tables(bprm, current->mm, &exec_params, &interp_params) < 0)
goto error_kill;
kdebug("- start_code %lx", (long) current->mm->start_code);
kdebug("- end_code %lx", (long) current->mm->end_code);
kdebug("- start_data %lx", (long) current->mm->start_data);
kdebug("- end_data %lx", (long) current->mm->end_data);
kdebug("- start_brk %lx", (long) current->mm->start_brk);
kdebug("- brk %lx", (long) current->mm->brk);
kdebug("- start_stack %lx", (long) current->mm->start_stack);
#ifdef ELF_FDPIC_PLAT_INIT
/*
* The ABI may specify that certain registers be set up in special
* ways (on i386 %edx is the address of a DT_FINI function, for
* example. This macro performs whatever initialization to
* the regs structure is required.
*/
ELF_FDPIC_PLAT_INIT(regs,
exec_params.map_addr,
interp_params.map_addr,
interp_params.dynamic_addr ?: exec_params.dynamic_addr
);
#endif
/* everything is now ready... get the userspace context ready to roll */
start_thread(regs,
interp_params.entry_addr ?: exec_params.entry_addr,
current->mm->start_stack);
if (unlikely(current->ptrace & PT_PTRACED)) {
if (current->ptrace & PT_TRACE_EXEC)
ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
else
send_sig(SIGTRAP, current, 0);
}
retval = 0;
error:
if (interpreter) {
allow_write_access(interpreter);
fput(interpreter);
}
if (interpreter_name)
kfree(interpreter_name);
if (exec_params.phdrs)
kfree(exec_params.phdrs);
if (exec_params.loadmap)
kfree(exec_params.loadmap);
if (interp_params.phdrs)
kfree(interp_params.phdrs);
if (interp_params.loadmap)
kfree(interp_params.loadmap);
return retval;
/* unrecoverable error - kill the process */
error_kill:
send_sig(SIGSEGV, current, 0);
goto error;
} /* end load_elf_fdpic_binary() */
static void
elf32_set_personality (void)
{
set_personality(PER_LINUX32);
current->thread.map_base = IA32_PAGE_OFFSET/3;
}
/*
* Helper function to process the load operation.
*/
static int
coff_load_object(struct linux_binprm *bprm, struct pt_regs *regs, int binary)
{
COFF_FILHDR *coff_hdr = NULL;
COFF_SCNHDR *text_sect = NULL, *data_sect = NULL,
*bss_sect = NULL, *sect_bufr = NULL,
*sect_ptr = NULL;
int text_count = 0, data_count = 0,
bss_count = 0, lib_count = 0;
coff_section text, data, bss;
u_long start_addr = 0, p = bprm->p;
short flags, aout_size = 0;
int pageable = 1, sections = 0, status = 0, i;
int coff_exec_fileno;
mm_segment_t old_fs;
coff_hdr = (COFF_FILHDR *)bprm->buf;
/*
* Validate the magic value for the object file.
*/
if (COFF_I386BADMAG(*coff_hdr))
return -ENOEXEC;
flags = COFF_SHORT(coff_hdr->f_flags);
/*
* The object file should have 32 BIT little endian format. Do not allow
* it to have the 16 bit object file flag set as Linux is not able to run
* on the 80286/80186/8086.
*/
if ((flags & (COFF_F_AR32WR | COFF_F_AR16WR)) != COFF_F_AR32WR)
return -ENOEXEC;
/*
* If the file is not executable then reject the execution. This means
* that there must not be external references.
*/
if ((flags & COFF_F_EXEC) == 0)
return -ENOEXEC;
/*
* Extract the header information which we need.
*/
sections = COFF_SHORT(coff_hdr->f_nscns); /* Number of sections */
aout_size = COFF_SHORT(coff_hdr->f_opthdr); /* Size of opt. headr */
/*
* There must be at least one section.
*/
if (!sections)
return -ENOEXEC;
if (!bprm->file->f_op->mmap)
pageable = 0;
if (!(sect_bufr = kmalloc(sections * COFF_SCNHSZ, GFP_KERNEL))) {
printk(KERN_WARNING "coff: kmalloc failed\n");
return -ENOMEM;
}
status = kernel_read(bprm->file, aout_size + COFF_FILHSZ,
(char *)sect_bufr, sections * COFF_SCNHSZ);
if (status < 0) {
printk(KERN_WARNING "coff: unable to read\n");
goto out_free_buf;
}
status = get_unused_fd();
if (status < 0) {
printk(KERN_WARNING "coff: unable to get free fs\n");
goto out_free_buf;
}
get_file(bprm->file);
fd_install(coff_exec_fileno = status, bprm->file);
/*
* Loop through the sections and find the various types
*/
sect_ptr = sect_bufr;
for (i = 0; i < sections; i++) {
long int sect_flags = COFF_LONG(sect_ptr->s_flags);
switch (sect_flags) {
case COFF_STYP_TEXT:
status |= coff_isaligned(sect_ptr);
text_sect = sect_ptr;
text_count++;
break;
case COFF_STYP_DATA:
status |= coff_isaligned(sect_ptr);
data_sect = sect_ptr;
data_count++;
break;
case COFF_STYP_BSS:
bss_sect = sect_ptr;
bss_count++;
break;
case COFF_STYP_LIB:
lib_count++;
break;
default:
break;
}
sect_ptr = (COFF_SCNHDR *) & ((char *) sect_ptr)[COFF_SCNHSZ];
}
/*
* If any of the sections weren't properly aligned we aren't
* going to be able to demand page this executable. Note that
* at this stage the *only* excuse for having status <= 0 is if
* the alignment test failed.
*/
if (status < 0)
pageable = 0;
/*
* Ensure that there are the required sections. There must be one
* text sections and one each of the data and bss sections for an
* executable. A library may or may not have a data / bss section.
*/
if (text_count != 1) {
status = -ENOEXEC;
goto out_free_file;
}
if (binary && (data_count != 1 || bss_count != 1)) {
status = -ENOEXEC;
goto out_free_file;
}
/*
* If there is no additional header then assume the file starts
* at the first byte of the text section. This may not be the
* proper place, so the best solution is to include the optional
* header. A shared library __MUST__ have an optional header to
* indicate that it is a shared library.
*/
if (aout_size == 0) {
if (!binary) {
status = -ENOEXEC;
goto out_free_file;
}
start_addr = COFF_LONG(text_sect->s_vaddr);
} else if (aout_size < (short) COFF_AOUTSZ) {
status = -ENOEXEC;
goto out_free_file;
} else {
COFF_AOUTHDR *aout_hdr;
short aout_magic;
aout_hdr = (COFF_AOUTHDR *) &((char *)coff_hdr)[COFF_FILHSZ];
aout_magic = COFF_SHORT(aout_hdr->magic);
/*
* Validate the magic number in the a.out header. If it is valid then
* update the starting symbol location. Do not accept these file formats
* when loading a shared library.
*/
switch (aout_magic) {
case COFF_OMAGIC:
case COFF_ZMAGIC:
case COFF_STMAGIC:
if (!binary) {
status = -ENOEXEC;
goto out_free_file;
}
start_addr = (u_int)COFF_LONG(aout_hdr->entry);
break;
/*
* Magic value for a shared library. This is valid only when
* loading a shared library.
*
* (There is no need for a start_addr. It won't be used.)
*/
case COFF_SHMAGIC:
if (!binary)
break;
/* FALLTHROUGH */
default:
status = -ENOEXEC;
goto out_free_file;
}
}
/*
* Generate the proper values for the text fields
*
* THIS IS THE POINT OF NO RETURN. THE NEW PROCESS WILL TRAP OUT SHOULD
* SOMETHING FAIL IN THE LOAD SEQUENCE FROM THIS POINT ONWARD.
*/
text.scnptr = COFF_LONG(text_sect->s_scnptr);
text.size = COFF_LONG(text_sect->s_size);
text.vaddr = COFF_LONG(text_sect->s_vaddr);
/*
* Generate the proper values for the data fields
*/
if (data_sect != NULL) {
data.scnptr = COFF_LONG(data_sect->s_scnptr);
data.size = COFF_LONG(data_sect->s_size);
data.vaddr = COFF_LONG(data_sect->s_vaddr);
} else {
data.scnptr = 0;
data.size = 0;
data.vaddr = 0;
}
/*
* Generate the proper values for the bss fields
*/
if (bss_sect != NULL) {
bss.size = COFF_LONG(bss_sect->s_size);
bss.vaddr = COFF_LONG(bss_sect->s_vaddr);
} else {
bss.size = 0;
bss.vaddr = 0;
}
/*
* Flush the executable from memory. At this point the executable is
* committed to being defined or a segmentation violation will occur.
*/
if (binary) {
COFF_SCNHDR *sect_ptr2 = sect_bufr;
u_long personality = PER_SVR3;
int i;
if ((status = flush_old_exec(bprm)))
goto out_free_file;
/*
* Look for clues as to the system this binary was compiled
* on in the comments section(s).
*
* Only look at the main binary, not the shared libraries
* (or would it be better to prefer shared libraries over
* binaries? Or could they be different???)
*/
for (i = 0; i < sections; i++) {
long sect_flags = COFF_LONG(sect_ptr2->s_flags);
if (sect_flags == COFF_STYP_INFO &&
(status = coff_parse_comments(bprm->file,
sect_ptr2, &personality)) > 0)
goto found;
sect_ptr2 = (COFF_SCNHDR *) &((char *)sect_ptr2)[COFF_SCNHSZ];
}
/*
* If no .comments section was found there is no way to
* figure out the personality. Odds on it is SCO though...
*/
personality = abi_defhandler_coff;
found:
set_personality(personality);
current->mm->start_data = 0;
current->mm->end_data = 0;
current->mm->end_code = 0;
current->mm->mmap = NULL;
current->flags &= ~PF_FORKNOEXEC;
current->mm->_rss = 0;
/*
* Construct the parameter and environment
* string table entries.
*/
if ((status = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT)) < 0)
goto sigsegv;
p = (u_long)coff_mktables((char *)bprm->p,
bprm->argc, bprm->envc);
current->mm->end_code = text.size +
(current->mm->start_code = text.vaddr);
current->mm->end_data = data.size +
(current->mm->start_data = data.vaddr);
current->mm->brk = bss.size +
(current->mm->start_brk = bss.vaddr);
current->mm->start_stack = p;
compute_creds(bprm);
start_thread(regs, start_addr, p);
}
old_fs = get_fs();
set_fs(get_ds());
if (!pageable) {
/*
* Read the file from disk...
*
* XXX: untested.
*/
loff_t pos = data.scnptr;
status = do_brk(text.vaddr, text.size);
bprm->file->f_op->read(bprm->file,
(char *)data.vaddr, data.scnptr, &pos);
status = do_brk(data.vaddr, data.size);
bprm->file->f_op->read(bprm->file,
(char *)text.vaddr, text.scnptr, &pos);
status = 0;
} else {
/* map the text pages...*/
status = map_coff(bprm->file, &text, PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
text.scnptr & PAGE_MASK);
if (status != (text.vaddr & PAGE_MASK)) {
status = -ENOEXEC;
goto out_free_file;
}
/* map the data pages */
if (data.size != 0) {
status = map_coff(bprm->file, &data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
data.scnptr & PAGE_MASK);
if (status != (data.vaddr & PAGE_MASK)) {
status = -ENOEXEC;
goto out_free_file;
}
}
status = 0;
}
/*
* Construct the bss data for the process. The bss ranges from the
* end of the data (which may not be on a page boundary) to the end
* of the bss section. Allocate any necessary pages for the data.
*/
if (bss.size != 0) {
down_write(¤t->mm->mmap_sem);
do_mmap(NULL, PAGE_ALIGN(bss.vaddr),
bss.size + bss.vaddr -
PAGE_ALIGN(bss.vaddr),
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
if ((status = coff_clear_memory(bss.vaddr, bss.size)) < 0)
goto out_free_file;
}
set_fs(old_fs);
if (!binary)
goto out_free_file;
/*
* Load any shared library for the executable.
*/
if (lib_count)
status = coff_preload_shlibs(bprm, sect_bufr, sections);
set_binfmt(&coff_format);
/*
* Generate any needed trap for this process. If an error occured then
* generate a segmentation violation. If the process is being debugged
* then generate the load trap. (Note: If this is a library load then
* do not generate the trap here. Pass the error to the caller who
* will do it for the process in the outer lay of this procedure call.)
*/
if (status < 0) {
sigsegv:
printk(KERN_WARNING "coff: trapping process with SEGV\n");
send_sig(SIGSEGV, current, 0); /* Generate the error trap */
} else if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
/* We are committed. It can't fail */
status = 0;
out_free_file:
sys_close(coff_exec_fileno);
out_free_buf:
kfree(sect_bufr);
return (status);
}
static int load_aout32_binary(struct linux_binprm * bprm, struct pt_regs * regs)
{
struct exec ex;
unsigned long error;
unsigned long fd_offset;
unsigned long rlim;
unsigned long orig_thr_flags;
int retval;
ex = *((struct exec *) bprm->buf); /* exec-header */
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
bprm->file->f_path.dentry->d_inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
fd_offset = N_TXTOFF(ex);
/* Check initial limits. This avoids letting people circumvent
* size limits imposed on them by creating programs with large
* arrays in the data or bss.
*/
rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
if (rlim >= RLIM_INFINITY)
rlim = ~0;
if (ex.a_data + ex.a_bss > rlim)
return -ENOMEM;
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
return retval;
/* OK, This is the point of no return */
set_personality(PER_SUNOS);
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
current->mm->end_data = ex.a_data +
(current->mm->start_data = N_DATADDR(ex));
current->mm->brk = ex.a_bss +
(current->mm->start_brk = N_BSSADDR(ex));
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
current->mm->mmap = NULL;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
if (N_MAGIC(ex) == NMAGIC) {
loff_t pos = fd_offset;
/* F**k me plenty... */
down_write(¤t->mm->mmap_sem);
error = do_brk(N_TXTADDR(ex), ex.a_text);
up_write(¤t->mm->mmap_sem);
bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex),
ex.a_text, &pos);
down_write(¤t->mm->mmap_sem);
error = do_brk(N_DATADDR(ex), ex.a_data);
up_write(¤t->mm->mmap_sem);
bprm->file->f_op->read(bprm->file, (char __user *)N_DATADDR(ex),
ex.a_data, &pos);
goto beyond_if;
}
if (N_MAGIC(ex) == OMAGIC) {
loff_t pos = fd_offset;
down_write(¤t->mm->mmap_sem);
do_brk(N_TXTADDR(ex) & PAGE_MASK,
ex.a_text+ex.a_data + PAGE_SIZE - 1);
up_write(¤t->mm->mmap_sem);
bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
} else {
static unsigned long error_time;
if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
(N_MAGIC(ex) != NMAGIC) && (jiffies-error_time) > 5*HZ)
{
printk(KERN_NOTICE "executable not page aligned\n");
error_time = jiffies;
}
if (!bprm->file->f_op->mmap) {
loff_t pos = fd_offset;
down_write(¤t->mm->mmap_sem);
do_brk(0, ex.a_text+ex.a_data);
up_write(¤t->mm->mmap_sem);
bprm->file->f_op->read(bprm->file,
(char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
goto beyond_if;
}
down_write(¤t->mm->mmap_sem);
error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset);
up_write(¤t->mm->mmap_sem);
if (error != N_TXTADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
down_write(¤t->mm->mmap_sem);
error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset + ex.a_text);
up_write(¤t->mm->mmap_sem);
if (error != N_DATADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
}
beyond_if:
set_binfmt(&aout32_format);
set_brk(current->mm->start_brk, current->mm->brk);
/* Make sure STACK_TOP returns the right thing. */
orig_thr_flags = current_thread_info()->flags;
current_thread_info()->flags |= _TIF_32BIT;
retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
current_thread_info()->flags = orig_thr_flags;
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
current->mm->start_stack =
(unsigned long) create_aout32_tables((char __user *)bprm->p, bprm);
tsb_context_switch(current->mm);
start_thread32(regs, ex.a_entry, current->mm->start_stack);
if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
return 0;
}
/*
* Helper function to process the load operation.
*/
static int
xout_load_object(struct linux_binprm * bpp, struct pt_regs *rp, int executable)
{
struct xexec *xexec = (struct xexec *)bpp->buf;
struct xext *xext = (struct xext *)(xexec + 1);
struct xseg *seglist;
struct file *fp = NULL;
u_long addr, lPers;
int nsegs, ntext, ndata;
int pageable = 1, err = 0, i;
#ifdef CONFIG_BINFMT_XOUT_X286
struct file *file;
#endif
lPers = abi_personality((char *)_BX(rp));
if (lPers == 0) lPers = PER_XENIX;
if (xexec->x_magic != X_MAGIC) {
return -ENOEXEC;
}
switch (xexec->x_cpu & XC_CPU) {
case XC_386:
break;
#if defined(CONFIG_BINFMT_XOUT_X286)
case XC_8086:
case XC_286:
case XC_286V:
case XC_186:
if (!Emulx286) return -ENOEXEC;
file = open_exec(Emulx286);
if (file) {
fput(bpp->file);
bpp->file = file;
kernel_read(bpp->file, 0L, bpp->buf, sizeof(bpp->buf));
}
return -ENOEXEC;
#endif
default:
dprintk(KERN_DEBUG "xout: unsupported CPU type (%02x)\n",
xexec->x_cpu);
return -ENOEXEC;
}
/*
* We can't handle byte or word swapped headers. Well, we
* *could* but they should never happen surely?
*/
if ((xexec->x_cpu & (XC_BSWAP | XC_WSWAP)) != XC_WSWAP) {
dprintk(KERN_DEBUG "xout: wrong byte or word sex (%02x)\n",
xexec->x_cpu);
return -ENOEXEC;
}
/* Check it's an executable. */
if (!(xexec->x_renv & XE_EXEC)) {
dprintk(KERN_DEBUG "xout: not executable\n");
return -ENOEXEC;
}
/*
* There should be an extended header and there should be
* some segments. At this stage we don't handle non-segmented
* binaries. I'm not sure you can get them under Xenix anyway.
*/
if (xexec->x_ext != sizeof(struct xext)) {
dprintk(KERN_DEBUG "xout: bad extended header\n");
return -ENOEXEC;
}
if (!(xexec->x_renv & XE_SEG) || !xext->xe_segsize) {
dprintk(KERN_DEBUG "xout: not segmented\n");
return -ENOEXEC;
}
if (!(seglist = kmalloc(xext->xe_segsize, GFP_KERNEL))) {
printk(KERN_WARNING "xout: allocating segment list failed\n");
return -ENOMEM;
}
err = kernel_read(bpp->file, xext->xe_segpos,
(char *)seglist, xext->xe_segsize);
if (err < 0) {
dprintk(KERN_DEBUG "xout: problem reading segment table\n");
goto out;
}
if (!bpp->file->f_op->mmap)
pageable = 0;
nsegs = xext->xe_segsize / sizeof(struct xseg);
ntext = ndata = 0;
for (i = 0; i < nsegs; i++) {
switch (seglist[i].xs_type) {
case XS_TTEXT:
if (isnotaligned(seglist+i))
pageable = 0;
ntext++;
break;
case XS_TDATA:
if (isnotaligned(seglist+i))
pageable = 0;
ndata++;
break;
}
}
if (!ndata)
goto out;
/*
* Generate the proper values for the text fields
*
* THIS IS THE POINT OF NO RETURN. THE NEW PROCESS WILL TRAP OUT SHOULD
* SOMETHING FAIL IN THE LOAD SEQUENCE FROM THIS POINT ONWARD.
*/
/*
* Flush the executable from memory. At this point the executable is
* committed to being defined or a segmentation violation will occur.
*/
if (executable) {
dprintk(KERN_DEBUG "xout: flushing executable\n");
flush_old_exec(bpp);
if ( (lPers & 0xFF) == (current->personality & 0xFF) ) set_personality(0);
set_personality(lPers);
#if defined(CONFIG_ABI_TRACE)
abi_trace(ABI_TRACE_UNIMPL, "Personality %08X assigned\n",
(unsigned int)current->personality);
#endif
#ifdef CONFIG_64BIT
set_thread_flag(TIF_IA32);
clear_thread_flag(TIF_ABI_PENDING);
#endif
current->mm->mmap = NULL;
#ifdef set_mm_counter
#if _KSL > 14
set_mm_counter(current->mm, file_rss, 0);
#else
set_mm_counter(current->mm, rss, 0);
#endif
#else
current->mm->rss = 0;
#endif
#if _KSL > 10
if ((err = setup_arg_pages(bpp, STACK_TOP, EXSTACK_DEFAULT)) < 0)
#else
if ((err = setup_arg_pages(bpp, EXSTACK_DEFAULT)) < 0)
#endif
{
send_sig(SIGSEGV, current, 1);
return (err);
}
bpp->p = (u_long)xout_create_tables((char *)bpp->p, bpp,
(xexec->x_cpu & XC_CPU) == XC_386 ? 1 : 0);
current->mm->start_code = 0;
current->mm->end_code = xexec->x_text;
current->mm->end_data = xexec->x_text + xexec->x_data;
current->mm->start_brk =
current->mm->brk = xexec->x_text + xexec->x_data + xexec->x_bss;
#if _KSL > 28
install_exec_creds(bpp);
#else
compute_creds(bpp);
#endif
current->flags &= ~PF_FORKNOEXEC;
#if _KSL < 15
#ifdef CONFIG_64BIT
__asm__ volatile (
"movl %0,%%fs; movl %0,%%es; movl %0,%%ds"
: :"r" (0));
__asm__ volatile (
"pushf; cli; swapgs; movl %0,%%gs; mfence; swapgs; popf"
: :"r" (0));
write_pda(oldrsp,bpp->p);
_FLG(rp) = 0x200;
#else
__asm__ volatile (
"movl %0,%%fs ; movl %0,%%gs"
: :"r" (0));
_DS(rp) = _ES(rp) = __USER_DS;
#endif
_SS(rp) = __USER_DS;
_SP(rp) = bpp->p;
_CS(rp) = __USER_CS;
_IP(rp) = xexec->x_entry;
set_fs(USER_DS);
#else
start_thread(rp, xexec->x_entry, bpp->p);
#endif
#ifdef CONFIG_64BIT
__asm__ volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS));
_SS(rp) = __USER32_DS;
_CS(rp) = __USER32_CS;
#endif
dprintk(KERN_DEBUG "xout: entry point = 0x%x:0x%08lx\n",
xext->xe_eseg, xexec->x_entry);
}
/*
* Scan the segments and map them into the process space. If this
* executable is pageable (unlikely since Xenix aligns to 1k
* boundaries and we want it aligned to 4k boundaries) this is
* all we need to do. If it isn't pageable we go round again
* afterwards and load the data. We have to do this in two steps
* because if segments overlap within a 4K page we'll lose the
* first instance when we remap the page. Hope that's clear...
*/
for (i = 0; err >= 0 && i < nsegs; i++) {
struct xseg *sp = seglist+i;
if (sp->xs_attr & XS_AMEM) {
err = xout_amen(fp, sp, pageable, &addr,
xexec, rp, (!ntext && ndata == 1));
}
}
/*
* We better fix start_data because sys_brk looks there to
* calculate data size.
* Kernel 2.2 did look at end_code so this is reasonable.
*/
if (current->mm->start_data == current->mm->start_code)
current->mm->start_data = current->mm->end_code;
dprintk(KERN_DEBUG "xout: start code 0x%08lx, end code 0x%08lx,"
" start data 0x%08lx, end data 0x%08lx, brk 0x%08lx\n",
current->mm->start_code, current->mm->end_code,
current->mm->start_data, current->mm->end_data,
current->mm->brk);
if (pageable)
goto trap;
if (err < 0)
goto trap;
for (i = 0; (err >= 0) && (i < nsegs); i++) {
struct xseg *sp = seglist + i;
u_long psize;
if (sp->xs_type == XS_TTEXT || sp->xs_type == XS_TDATA) {
dprintk(KERN_DEBUG "xout: read to 0x%08lx from 0x%08lx,"
" length 0x%8lx\n", sp->xs_rbase,
sp->xs_filpos, sp->xs_psize);
if (sp->xs_psize < 0)
continue;
/*
* Do we still get the size ? Yes! [joerg]
*/
psize = kernel_read(bpp->file, sp->xs_filpos,
(char *)((long)sp->xs_rbase), sp->xs_psize);
if (psize != sp->xs_psize) {
dprintk(KERN_DEBUG "xout: short read 0x%8lx\n",psize);
err = -1;
break;
}
}
}
/*
* Generate any needed trap for this process. If an error occured then
* generate a segmentation violation. If the process is being debugged
* then generate the load trap. (Note: If this is a library load then
* do not generate the trap here. Pass the error to the caller who
* will do it for the process in the outer lay of this procedure call.)
*/
trap:
if (executable) {
if (err < 0) {
dprintk(KERN_DEBUG "xout: loader forces seg fault "
"(err = %d)\n", err);
send_sig(SIGSEGV, current, 0);
}
#ifdef CONFIG_PTRACE
/* --- Red Hat specific handling --- */
#else
else if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
#endif
err = 0;
}
out:
kfree(seglist);
dprintk(KERN_DEBUG "xout: binfmt_xout: result = %d\n", err);
/*
* If we are using the [2]86 emulation overlay we enter this
* rather than the real program and give it the information
* it needs to start the ball rolling.
*/
/*
* Xenix 386 programs expect the initial brk value to be in eax
* on start up. Hence if we succeeded we need to pass back
* the brk value rather than the status. Ultimately the
* ret_from_sys_call assembly will place this in eax before
* resuming (starting) the process.
*/
return (err < 0 ? err : current->mm->brk);
}
/* These are the functions used to load ELF style executables and shared
* libraries. There is no binary dependent code anywhere else.
*/
static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
{
struct elfhdr elf_ex, interp_elf_ex;
struct file *interpreter;
struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr;
unsigned int load_addr, elf_bss, elf_brk;
unsigned int elf_entry, interp_load_addr = 0;
unsigned int start_code, end_code, end_data, elf_stack;
int retval, has_interp, has_ephdr, size, i;
char *elf_interpreter;
mm_segment_t old_fs;
load_addr = 0;
has_interp = has_ephdr = 0;
elf_ihdr = elf_ephdr = NULL;
elf_ex = *((struct elfhdr *) bprm->buf);
retval = -ENOEXEC;
if (verify_binary(&elf_ex, bprm))
goto out;
/*
* Telling -o32 static binaries from Linux and Irix apart from each
* other is difficult. There are 2 differences to be noted for static
* binaries from the 2 operating systems:
*
* 1) Irix binaries have their .text section before their .init
* section. Linux binaries are just the opposite.
*
* 2) Irix binaries usually have <= 12 sections and Linux
* binaries have > 20.
*
* We will use Method #2 since Method #1 would require us to read in
* the section headers which is way too much overhead. This appears
* to work for everything we have ran into so far. If anyone has a
* better method to tell the binaries apart, I'm listening.
*/
if (elf_ex.e_shnum > 20)
goto out;
print_elfhdr(&elf_ex);
/* Now read in all of the header information */
size = elf_ex.e_phentsize * elf_ex.e_phnum;
if (size > 65536)
goto out;
elf_phdata = kmalloc(size, GFP_KERNEL);
if (elf_phdata == NULL) {
retval = -ENOMEM;
goto out;
}
retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
if (retval < 0)
goto out_free_ph;
dump_phdrs(elf_phdata, elf_ex.e_phnum);
/* Set some things for later. */
for (i = 0; i < elf_ex.e_phnum; i++) {
switch (elf_phdata[i].p_type) {
case PT_INTERP:
has_interp = 1;
elf_ihdr = &elf_phdata[i];
break;
case PT_PHDR:
has_ephdr = 1;
elf_ephdr = &elf_phdata[i];
break;
};
}
pr_debug("\n");
elf_bss = 0;
elf_brk = 0;
elf_stack = 0xffffffff;
elf_interpreter = NULL;
start_code = 0xffffffff;
end_code = 0;
end_data = 0;
/*
* If we get a return value, we change the value to be ENOEXEC
* so that we can exit gracefully and the main binary format
* search loop in 'fs/exec.c' will move onto the next handler
* which should be the normal ELF binary handler.
*/
retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
&interp_elf_ex, elf_phdata, bprm,
elf_ex.e_phnum);
if (retval) {
retval = -ENOEXEC;
goto out_free_file;
}
if (elf_interpreter) {
retval = verify_irix_interpreter(&interp_elf_ex);
if (retval)
goto out_free_interp;
}
/* OK, we are done with that, now set up the arg stuff,
* and then start this sucker up.
*/
retval = -E2BIG;
if (!bprm->sh_bang && !bprm->p)
goto out_free_interp;
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
goto out_free_dentry;
/* OK, This is the point of no return */
current->mm->end_data = 0;
current->mm->end_code = 0;
current->mm->mmap = NULL;
current->flags &= ~PF_FORKNOEXEC;
elf_entry = (unsigned int) elf_ex.e_entry;
/* Do this so that we can load the interpreter, if need be. We will
* change some of these later.
*/
setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
current->mm->start_stack = bprm->p;
/* At this point, we assume that the image should be loaded at
* fixed address, not at a variable address.
*/
old_fs = get_fs();
set_fs(get_ds());
map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack,
&load_addr, &start_code, &elf_bss, &end_code,
&end_data, &elf_brk);
if (elf_interpreter) {
retval = map_interpreter(elf_phdata, &interp_elf_ex,
interpreter, &interp_load_addr,
elf_ex.e_phnum, old_fs, &elf_entry);
kfree(elf_interpreter);
if (retval) {
set_fs(old_fs);
printk("Unable to load IRIX ELF interpreter\n");
send_sig(SIGSEGV, current, 0);
retval = 0;
goto out_free_file;
}
}
set_fs(old_fs);
kfree(elf_phdata);
set_personality(PER_IRIX32);
set_binfmt(&irix_format);
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
bprm->p = (unsigned long)
create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc,
(elf_interpreter ? &elf_ex : NULL),
load_addr, interp_load_addr, regs, elf_ephdr);
current->mm->start_brk = current->mm->brk = elf_brk;
current->mm->end_code = end_code;
current->mm->start_code = start_code;
current->mm->end_data = end_data;
current->mm->start_stack = bprm->p;
/* Calling set_brk effectively mmaps the pages that we need for the
* bss and break sections.
*/
set_brk(elf_bss, elf_brk);
/*
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
irix_map_prda_page();
padzero(elf_bss);
pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
pr_debug("(brk) %lx\n" , (long) current->mm->brk);
#if 0 /* XXX No f*****g way dude... */
/* Why this, you ask??? Well SVr4 maps page 0 as read-only,
* and some applications "depend" upon this behavior.
* Since we do not have the power to recompile these, we
* emulate the SVr4 behavior. Sigh.
*/
down_write(¤t->mm->mmap_sem);
(void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
#endif
start_thread(regs, elf_entry, bprm->p);
if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
return 0;
out:
return retval;
out_free_dentry:
allow_write_access(interpreter);
fput(interpreter);
out_free_interp:
kfree(elf_interpreter);
out_free_file:
out_free_ph:
kfree(elf_phdata);
goto out;
}
static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
{
struct exec ex;
unsigned long error;
unsigned long fd_offset;
unsigned long rlim;
int retval;
ex = *((struct exec *) bprm->buf); /* exec-header */
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
bprm->file->f_dentry->d_inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
fd_offset = N_TXTOFF(ex);
/* Check initial limits. This avoids letting people circumvent
* size limits imposed on them by creating programs with large
* arrays in the data or bss.
*/
rlim = current->rlim[RLIMIT_DATA].rlim_cur;
if (rlim >= RLIM_INFINITY)
rlim = ~0;
if (ex.a_data + ex.a_bss > rlim)
return -ENOMEM;
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
return retval;
/* OK, This is the point of no return */
#if defined(__alpha__)
SET_AOUT_PERSONALITY(bprm, ex);
#elif defined(__sparc__)
set_personality(PER_SUNOS);
#if !defined(__sparc_v9__)
memcpy(¤t->thread.core_exec, &ex, sizeof(struct exec));
#endif
#else
set_personality(PER_LINUX);
#endif
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
current->mm->end_data = ex.a_data +
(current->mm->start_data = N_DATADDR(ex));
current->mm->brk = ex.a_bss +
(current->mm->start_brk = N_BSSADDR(ex));
current->mm->rss = 0;
current->mm->mmap = NULL;
#ifdef CONFIG_ARM_FASS
arch_new_mm(current, current->mm);
#endif
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
#ifdef __sparc__
if (N_MAGIC(ex) == NMAGIC) {
loff_t pos = fd_offset;
/* F**k me plenty... */
/* <AOL></AOL> */
error = do_brk(N_TXTADDR(ex), ex.a_text);
bprm->file->f_op->read(bprm->file, (char *) N_TXTADDR(ex),
ex.a_text, &pos);
error = do_brk(N_DATADDR(ex), ex.a_data);
bprm->file->f_op->read(bprm->file, (char *) N_DATADDR(ex),
ex.a_data, &pos);
goto beyond_if;
}
#endif
if (N_MAGIC(ex) == OMAGIC) {
unsigned long text_addr, map_size;
loff_t pos;
text_addr = N_TXTADDR(ex);
#if defined(__alpha__) || defined(__sparc__)
pos = fd_offset;
map_size = ex.a_text+ex.a_data + PAGE_SIZE - 1;
#else
pos = 32;
map_size = ex.a_text+ex.a_data;
#endif
error = do_brk(text_addr & PAGE_MASK, map_size);
if (error != (text_addr & PAGE_MASK)) {
send_sig(SIGKILL, current, 0);
return error;
}
error = bprm->file->f_op->read(bprm->file, (char *)text_addr,
ex.a_text+ex.a_data, &pos);
if ((signed long)error < 0) {
send_sig(SIGKILL, current, 0);
return error;
}
flush_icache_range(text_addr, text_addr+ex.a_text+ex.a_data);
} else {
static unsigned long error_time, error_time2;
if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
(N_MAGIC(ex) != NMAGIC) && (jiffies-error_time2) > 5*HZ)
{
printk(KERN_NOTICE "executable not page aligned\n");
error_time2 = jiffies;
}
if ((fd_offset & ~PAGE_MASK) != 0 &&
(jiffies-error_time) > 5*HZ)
{
printk(KERN_WARNING
"fd_offset is not page aligned. Please convert program: %s\n",
bprm->file->f_dentry->d_name.name);
error_time = jiffies;
}
if (!bprm->file->f_op->mmap||((fd_offset & ~PAGE_MASK) != 0)) {
loff_t pos = fd_offset;
do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
bprm->file->f_op->read(bprm->file,(char *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
flush_icache_range((unsigned long) N_TXTADDR(ex),
(unsigned long) N_TXTADDR(ex) +
ex.a_text+ex.a_data);
goto beyond_if;
}
down_write(¤t->mm->mmap_sem);
error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset);
up_write(¤t->mm->mmap_sem);
if (error != N_TXTADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
down_write(¤t->mm->mmap_sem);
error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset + ex.a_text);
up_write(¤t->mm->mmap_sem);
if (error != N_DATADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
}
beyond_if:
set_binfmt(&aout_format);
set_brk(current->mm->start_brk, current->mm->brk);
retval = setup_arg_pages(bprm);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
current->mm->start_stack =
(unsigned long) create_aout_tables((char *) bprm->p, bprm);
#ifdef __alpha__
regs->gp = ex.a_gpvalue;
#endif
start_thread(regs, ex.a_entry, current->mm->start_stack);
if (current->ptrace & PT_PTRACED)
send_sig(SIGTRAP, current, 0);
#ifndef __arm__
return 0;
#else
return regs->ARM_r0;
#endif
}
void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int personality = PER_LINUX_32BIT;
set_personality(personality);
}
static int set_personality32()
{
if (get_arch_from_elf("/sbin/init") != elf_32)
return 0;
return set_personality(PER_LINUX32);
}
static int load_fn_file(struct linux_binprm * bprm,unsigned long *extra_stack)
{
unsigned long stack_len;
unsigned long stack_start;
unsigned long start_code, end_code;
unsigned long result;
unsigned long rlim;
stack_len = USERSPACE_STACK_SIZE;
if (extra_stack) {
stack_len += *extra_stack;
*extra_stack = stack_len;
}
/*
* Check initial limits. This avoids letting people circumvent
* size limits imposed on them by creating programs with large
* arrays in the data or bss.
*/
rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
if (rlim >= RLIM_INFINITY)
rlim = ~0;
/* Flush all traces of the currently running executable */
result = flush_old_exec(bprm);
if (result)
return result;
/* OK, This is the point of no return */
set_personality(PER_LINUX);
/*
* there are a couple of cases here, the separate code/data
* case, and then the fully copied to RAM case which lumps
* it all together.
*/
down_write(¤t->mm->mmap_sem);
stack_start= do_mmap(0, 0,stack_len,
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
if (!stack_start|| stack_start >= (unsigned long) -4096) {
if (!stack_start)
stack_start = (unsigned long) -ENOMEM;
printk("Unable to allocate RAM for process text/data, errno %d\n",
(int)-stack_start);
return(stack_start);
}
/* The main program needs a little extra setup in the task structure */
start_code = (unsigned long)bprm->filename;
end_code = start_code + PAGE_SIZE*2;
current->mm->start_code = start_code;
current->mm->end_code = end_code;
current->mm->start_data = 0;
current->mm->end_data = 0;
/*
* set up the brk stuff, uses any slack left in data/bss/stack
* allocation. We put the brk after the bss (between the bss
* and stack) like other platforms.
*/
current->mm->start_brk = 0;
current->mm->brk = 0;
current->mm->context.end_brk = stack_start;
set_mm_counter(current->mm, rss, 0);
flush_icache_range(start_code, end_code);
memset((unsigned char*)stack_start,0,stack_len);
return 0;
}
static int load_macho_binary(struct linux_binprm *bprm, struct pt_regs *regs)
{
unsigned long def_flags = 0;
void* entry_point = 0;
int retval = -ENOEXEC;
int file_size = 0;
int executable_stack = EXSTACK_DEFAULT;
size_t macho_header_sz = sizeof(macho_header);
macho_header* head = ((macho_header*)bprm->buf);
struct file *linker_file = NULL;
/* have we got enough space? */
if (!head) {
retval = -ENOMEM;
goto out_ret;
}
retval = ml_checkImage(bprm->file, head);
if (retval) {
printk(KERN_WARNING "load_macho_binary: image failed sanity checks, not loading \n");
goto out_ret;
}
/*
XXX: this should be retrieved by ml_checkImage()
*/
file_size = ml_getFileSize(bprm->file);
/*
The file seems to be alright, so set up an environment for the
new binary to run in. After this, the old image will no longer be
usable. If some of the load commands are broken, this process is doomed.
*/
retval = flush_old_exec(bprm);
if (retval) {
panic("load_macho_binary: flush_old_exec failed\n");
}
else {
current->flags &= ~PF_FORKNOEXEC;
current->mm->def_flags = def_flags;
setup_new_exec(bprm);
/* set personality */
unsigned int personality = current->personality & ~PER_MASK;
personality |= PER_LINUX;
/*
This flag has to be set for 32x architectures (I think).
*/
personality |= ADDR_LIMIT_32BIT;
set_personality(personality);
/* set stuff */
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
//retval = setup_arg_pages(bprm, randomize_stack_top(STACK_TOP), executable_stack);
if (retval < 0) {
//send_sig(SIGKILL, current, 0);
//goto out_ret;
}
/* stack */
current->mm->start_stack = bprm->p;
}
/*
Read the load commands from the file.
*/
size_t offset;
size_t oldoffset;
uint32_t ncmds;
uint8_t* addr;
offset = 0;
ncmds = head->ncmds;
addr = kmalloc(head->sizeofcmds, GFP_KERNEL); /***/
retval = -EINVAL;
int ret = 0;
/*
Top of the image data. This is needed to position the heap.
*/
int top_data = 0;
/*
First text segment where the mach header is.
*/
void* first_text = 0;
void* first_text_linker = 0;
/* read in load commands */
kernel_read(bprm->file, macho_header_sz, addr, head->sizeofcmds);
while (ncmds--) {
/* LC pointer */
struct load_command *lcp =
(struct load_command *)(addr + offset);
oldoffset = offset;
offset += lcp->cmdsize;
if (oldoffset > offset ||
lcp->cmdsize < sizeof(struct load_command) ||
offset > head->sizeofcmds + macho_header_sz)
{
printk(KERN_WARNING "load_macho_binary: malformed binary - lc overflow \n");
goto lc_ret;
}
/* Parse load commands.
We only need a bare minimum to get the image up an running. Dyld will
take care of all the other stuff.
*/
switch(lcp->cmd) {
case LC_SEGMENT:
ret = ml_loadSegment(bprm, file_size, (struct segment_command*)lcp, &top_data, &first_text, 0);
if (ret != LOAD_SUCCESS) {
printk(KERN_WARNING "load_macho_binary: segment loading failure \n");
goto lc_ret;
}
break;
case LC_LOAD_DYLINKER:
ret = ml_loadDylinker(bprm, file_size, (struct dylinker_command*)lcp, &linker_file);
if (ret != LOAD_SUCCESS) {
printk(KERN_WARNING "load_macho_binary: dylinker loading failure \n");
goto lc_ret;
}
else {
/* done */
}
break;
case LC_UNIXTHREAD:
ret = ml_loadUnixThread(bprm, file_size, (struct arm_thread_command*)lcp, &entry_point);
if (ret != LOAD_SUCCESS) {
printk(KERN_WARNING "load_macho_binary: unix thread loading failure \n");
goto lc_ret;
}
break;
default:
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: unsupported lc 0x%p \n", (void*)lcp->cmd);
break;
}
}
/*
Bootstrap the dynamic linker if needed.
*/
if (linker_file) {
int dylinker_load_addr = top_data;
ml_bootstrapDylinker(linker_file,
&top_data,
&first_text_linker,
&entry_point);
/* slide the entry point */
entry_point = entry_point + dylinker_load_addr;
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: dylinker's first text segment @ %d, new pc @ %d \n",
first_text_linker,
(int)entry_point);
}
/*
Now, I don't know what these are used for, but I'm fairly sure
they're *very* important. So let's set them up.
See 'linux/mm_types.h':
unsigned long start_code, end_code, start_data, end_data;
unsigned long start_brk, brk, start_stack;
*/
current->mm->start_code = 0; /* IMP */
current->mm->end_code = top_data; /* IMP */
current->mm->start_data = 0;
current->mm->end_data = top_data;
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: setting up heap ...\n");
/* Set up an empty heap. This will be grown as more memory is allocated. */
int brkret = ml_setBrk(top_data, top_data);
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: setting up misc ...\n");
/* setup misc stuff */
set_binfmt(&macho_format);
install_exec_creds(bprm);
/*
Stack (grows down on ARM).
*/
uint32_t* stack = bprm->p;
uint32_t* argv_array;
uint32_t* argv;
uint32_t* envp_array;
uint32_t* envp;
uint32_t total_argv_size;
uint32_t total_env_size;
/* Construct envp array. */
envp = envp_array = stack = (uint32_t*)stack - ((bprm->envc+1));
/* Construct argv array. */
argv = argv_array = stack = (uint32_t*)stack - ((bprm->argc+1));
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: setting up stack @ %p ...\n", (uint32_t*)stack);
uint32_t argc = bprm->argc;
uint32_t envc = bprm->envc;
char* p = bprm->p;
/* Set up argv pointers */
current->mm->arg_start = (unsigned long)p;
while(argc--) {
char c;
put_user(p,argv++);
do {
get_user(c,p++);
} while (c);
}
put_user(NULL,argv);
/* Set up envp pointers */
current->mm->arg_end = current->mm->env_start = (unsigned long) p;
while(envc--) {
char c;
put_user(p,envp++);
do {
get_user(c,p++);
} while (c);
}
put_user(NULL,envp);
current->mm->env_end = (unsigned long) p;
/*
The actual stuff passed to the linker goes here.
*/
stack = (uint32_t*)stack - (4);
stack[0] = (uint32_t)first_text; /* mach_header */
stack[1] = bprm->argc; /* argc */
stack[2] = argv_array; /* argv */
stack[3] = (uint32_t)first_text_linker; /* linker's mach_header */
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: setting up main thread ...\n");
/*
Set up the main thread
*/
if (BAD_ADDR(entry_point)) {
/* entry point is not executable */
printk(KERN_WARNING "load_macho_binary: bad entry point \n");
force_sig(SIGSEGV, current);
retval = -EINVAL;
goto lc_ret;
}
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: setting up registers ...\n");
/*
See 'start_thread' in 'processor.h'
'start_thread' provides an ELF implementation of this function.
This is for the Darwin ABI implementation which is used by iPhoneOS binaries.
*/
unsigned long initial_pc = (unsigned long)entry_point;
/* exit supervisor and enter user */
set_fs(USER_DS);
memset(regs->uregs, 0, sizeof(regs->uregs));
regs->ARM_cpsr = USR_MODE;
/* not sure */
if (elf_hwcap & HWCAP_THUMB && initial_pc & 1)
regs->ARM_cpsr |= PSR_T_BIT;
/* set up control regs */
regs->ARM_cpsr |= PSR_ENDSTATE;
regs->ARM_pc = initial_pc & ~1; /* pc */
regs->ARM_sp = stack; /* sp */
/* This is actually ignored, but set it anyway */
regs->ARM_r2 = stack[2]; /* r2 (envp) */
regs->ARM_r1 = stack[1]; /* r1 (argv) */
regs->ARM_r0 = stack[0]; /* r0 (argc) */
/* this will work for mmu and nonmmu */
nommu_start_thread(regs);
wire_weird_pages();
/*
Binary is now loaded. Return 0 to signify success.
*/
retval = 0;
if (_verboseLog)
printk(KERN_WARNING "load_macho_binary: complete, heap starts at %d, brkret %d \n", top_data, brkret);
/*
Teardown
*/
lc_ret:
kfree(addr);
out_ret:
return retval;
}
