C++ (Cpp) set_sensor_positionの例

プログラミング言語: C++ (Cpp)

メソッド/関数: set_sensor_position

hotexamples.comのコード掲載数: 7

C++ (Cpp) set_sensor_position - 7件のコード例が見つかりました。すべてオープンソースプロジェクトから抽出されたC++ (Cpp)のset_sensor_positionの実例で、最も評価が高いものを厳選しています。コード例の評価を行っていただくことで、より質の高いコード例が表示されるようになります。

コード例 #1

ファイルを表示

ファイル: ssp_dev.c プロジェクト: bigzz/Galaxy_S6_920F_Kernel

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	clean_pending_list(data);

	iRet = get_chipid(data);
	pr_info("[SSP] MCU device ID = %d, reading ID = %d\n", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0) {
			pr_err("[SSP]: %s - MCU is not working : 0x%x\n",
				__func__, iRet);
		} else {
			pr_err("[SSP]: %s - MCU identification failed\n",
				__func__);
			iRet = -ENODEV;
		}
		goto out;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}
	    
#ifdef CONFIG_SENSORS_MULTIPLE_GLASS_TYPE
    	iRet = set_glass_type(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}
#endif

	data->uSensorState = get_sensor_scanning_info(data);
	if (data->uSensorState == 0) {
		pr_err("[SSP]: %s - get_sensor_scanning_info failed\n",
			__func__);
		iRet = ERROR;
		goto out;
	}

	iRet = initialize_magnetic_sensor(data);
	if (iRet < 0)
		pr_err("[SSP]: %s - initialize magnetic sensor failed\n",
			__func__);

	data->uCurFirmRev = get_firmware_rev(data);
	pr_info("[SSP] MCU Firm Rev : New = %8u\n",
		data->uCurFirmRev);

// hoi: il dan mak a
#ifndef CONFIG_SENSORS_SSP_BBD
	iRet = ssp_send_cmd(data, MSG2SSP_AP_MCU_DUMP_CHECK, 0);
#endif
out:
	return iRet;
}

コード例 #2

ファイルを表示

ファイル: ssp_dev.c プロジェクト: ShedrockN4/wiliteneo

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	clean_pending_list(data);

	iRet = get_chipid(data);
	ssp_info("MCU device ID = %d, reading ID = %d", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0) {
			ssp_errf("MCU is not working : 0x%x", iRet);
		} else {
			ssp_errf("MCU identification failed");
			iRet = -ENODEV;
		}
		goto out;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		ssp_errf("set_sensor_position failed");
		goto out;
	}

#ifdef CONFIG_SENSORS_MULTIPLE_GLASS_TYPE
    	iRet = set_glass_type(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}
#endif

	data->uSensorState = get_sensor_scanning_info(data);
	if (data->uSensorState == 0) {
		ssp_errf("get_sensor_scanning_info failed");
		iRet = ERROR;
		goto out;
	}

	iRet = initialize_magnetic_sensor(data);
	if (iRet < 0)
		ssp_errf("initialize magnetic sensor failed");

	data->uCurFirmRev = get_firmware_rev(data);
	ssp_info("MCU Firm Rev : New = %8u", data->uCurFirmRev);

out:
	return iRet;
}

コード例 #3

ファイルを表示

ファイル: ssp_dev.c プロジェクト: mikebarr007/BeastMode-Kernel-N900P

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	iRet = get_chipid(data);
	pr_info("[SSP] MCU device ID = %d, reading ID = %d\n", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0) {
			pr_err("[SSP]: %s - MCU is not working : 0x%x\n",
				__func__, iRet);
		} else {
			pr_err("[SSP]: %s - MCU identification failed\n",
				__func__);
			iRet = -ENODEV;
		}
		goto out;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}

	data->uSensorState = get_sensor_scanning_info(data);
	if (data->uSensorState == 0) {
		pr_err("[SSP]: %s - get_sensor_scanning_info failed\n",
			__func__);
		iRet = ERROR;
		goto out;
	}

	iRet = ssp_send_cmd(data, MSG2SSP_AP_MCU_SET_DUMPMODE,
			sec_debug_is_enabled());
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_mcu_dump_mode failed\n", __func__);
		goto out;
	}

#if defined (CONFIG_SENSORS_SSP_YAS532)
	iRet = set_static_matrix(data);
	if (iRet < 0)
		pr_err("[SSP]: %s - yas set static matrix failed\n", __func__);
#endif
	iRet = SUCCESS;
out:
	return iRet;
}

コード例 #4

ファイルを表示

ファイル: ssp_dev.c プロジェクト: StanTRC/boeffla-kernel-cm-s5

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	clean_pending_list(data);

	iRet = get_chipid(data);
	pr_info("[SSP] MCU device ID = %d, reading ID = %d\n", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0) {
			pr_err("[SSP]: %s - MCU is not working : 0x%x\n",
				__func__, iRet);
		} else {
			pr_err("[SSP]: %s - MCU identification failed\n",
				__func__);
			iRet = -ENODEV;
		}
		goto out;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}

	iRet = get_fuserom_data(data);
	if (iRet < 0)
		pr_err("[SSP]: %s - get_fuserom_data failed\n", __func__);

	data->uSensorState = get_sensor_scanning_info(data);
	if (data->uSensorState == 0) {
		pr_err("[SSP]: %s - get_sensor_scanning_info failed\n",
			__func__);
		iRet = ERROR;
		goto out;
	}

	data->uCurFirmRev = get_firmware_rev(data);
	pr_info("[SSP] MCU Firm Rev : New = %8u\n",
		data->uCurFirmRev);

	iRet = ssp_send_cmd(data, MSG2SSP_AP_MCU_DUMP_CHECK, 0);
out:
	return iRet;
}

コード例 #5

ファイルを表示

ファイル: ssp_dev.c プロジェクト: lssjbrolli/android_kernel_samsung_klimtlte

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	iRet = get_chipid(data);
	pr_info("[SSP] MCU device ID = %d, reading ID = %d\n", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0) {
			pr_err("[SSP]: %s - MCU is not working : 0x%x\n",
				__func__, iRet);
		} else {
			pr_err("[SSP]: %s - MCU identification failed\n",
				__func__);
			iRet = -ENODEV;
		}
		goto out;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		goto out;
	}

	iRet = set_magnetic_static_matrix(data);
	if (iRet < 0)
		pr_err("[SSP] %s - set_magnetic_static_matrix failed\n", __func__);

	iRet = get_fuserom_data(data);
	if (iRet < 0)
		pr_err("[SSP]: %s - get_fuserom_data failed\n", __func__);

	data->uSensorState = get_sensor_scanning_info(data);
	if (data->uSensorState == 0) {
		pr_err("[SSP]: %s - get_sensor_scanning_info failed\n",
			__func__);
		iRet = ERROR;
		goto out;
	}

	iRet = SUCCESS;
out:
	return iRet;
}

コード例 #6

ファイルを表示

ファイル: ssp_dev.c プロジェクト: ausdim/boeffla-kernel-jb-u8-s3

int initialize_mcu(struct ssp_data *data)
{
	int iRet = 0;

	iRet = get_chipid(data);
	pr_info("[SSP] MPU device ID = %d, reading ID = %d\n", DEVICE_ID, iRet);
	if (iRet != DEVICE_ID) {
		if (iRet < 0)
			pr_err("[SSP]: %s - i2c for reading chip id failed\n",
			       __func__);
		else {
			pr_err("[SSP]: %s - Device identification failed\n",
			       __func__);
			iRet = -ENODEV;
		}
		return iRet;
	}

	iRet = set_sensor_position(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - set_sensor_position failed\n", __func__);
		return iRet;
	}

	iRet = get_fuserom_data(data);
	if (iRet < 0) {
		pr_err("[SSP]: %s - get_fuserom_data failed\n", __func__);
		return iRet;
	}

	data->uAliveSensorDebug = get_sensor_scanning_info(data);
	if (data->uAliveSensorDebug == 0) {
		pr_err("[SSP]: %s - get_sensor_scanning_info failed\n",
			__func__);
		return FAIL;
	}

	return SUCCESS;
}

コード例 #7

ファイルを表示

ファイル: ssp_debug.c プロジェクト: Svard73/SM-T700-T705-Kernel

static void debug_work_func(struct work_struct *work)
{
	unsigned int uSensorCnt;
	struct ssp_data *data = container_of(work, struct ssp_data, work_debug);

	ssp_dbg("[SSP]: %s(%u) - Sensor state: 0x%x, RC: %u, MS: %u Santi: %u Dump: %u\n",
		__func__, data->uIrqCnt, data->uSensorState, data->uResetCnt,
		data->uMissSensorCnt,data->uSanityCnt,data->uDumpCnt);

	if (data->fw_dl_state >= FW_DL_STATE_DOWNLOADING &&
		data->fw_dl_state < FW_DL_STATE_DONE) {
		pr_info("[SSP] : %s firmware downloading state = %d\n",
			__func__, data->fw_dl_state);
		return;
	} else if (data->fw_dl_state == FW_DL_STATE_FAIL) {
		pr_err("[SSP] : %s firmware download failed = %d\n",
			__func__, data->fw_dl_state);
		return;
	}

	if(sanity_check(data)>0) data->uSanityCnt++;


	if (set_sensor_position(data) < 0) {
		pr_err("[SSP]: %s :set_sensor_position delayed \n", __func__);
	}

	for (uSensorCnt = 0; uSensorCnt < (SENSOR_MAX); uSensorCnt++)
		if ((atomic_read(&data->aSensorEnable) & (1 << uSensorCnt))
			|| data->batchLatencyBuf[uSensorCnt])
			print_sensordata(data, uSensorCnt);

	if (((data->uSsdFailCnt >= LIMIT_SSD_FAIL_CNT)
		|| (data->uInstFailCnt >= LIMIT_INSTRUCTION_FAIL_CNT)
		|| (data->uIrqFailCnt >= LIMIT_IRQ_FAIL_CNT)
		|| ((data->uTimeOutCnt + data->uBusyCnt) > LIMIT_TIMEOUT_CNT))
		&& (data->bSspShutdown == false)) {

		if (data->uResetCnt < LIMIT_RESET_CNT) {
			wake_lock(&data->ssp_wake_lock);
			pr_info("[SSP] : %s - uSsdFailCnt(%u), uInstFailCnt(%u),"\
				"uIrqFailCnt(%u), uTimeOutCnt(%u), uBusyCnt(%u), pending(%u)\n",
				__func__, data->uSsdFailCnt, data->uInstFailCnt, data->uIrqFailCnt,
				data->uTimeOutCnt, data->uBusyCnt, !list_empty(&data->pending_list));
			reset_mcu(data);
			data->uResetCnt++;
			wake_unlock(&data->ssp_wake_lock);
		} else {
			pr_info("[SSP] : %s - data->uResetCnt == LIMIT_RESET_CNT\n", __func__);
			ssp_enable(data, false);
		}

		data->uSsdFailCnt = 0;
		data->uInstFailCnt = 0;
		data->uTimeOutCnt = 0;
		data->uBusyCnt = 0;
		data->uIrqFailCnt = 0;
	}

	data->uIrqCnt = 0;
}