コード例 #1
0
ファイル: ldmd.c プロジェクト: funnelfiasco/LDM
int main(
        int ac,
        char* av[])
{
    const char* pqfname = getQueuePath();
    int sock = -1;
    int status;
    int doSomething = 1;
    in_addr_t locIpAddr = (in_addr_t) htonl(INADDR_ANY );
    unsigned ldmPort = LDM_PORT;

    ensureDumpable();

    /*
     * deal with the command line, set options
     */
    {
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int logmask = LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING)
                | LOG_MASK(LOG_NOTICE);

        opterr = 1;

        while ((ch = getopt(ac, av, "I:vxl:nq:o:P:M:m:t:")) != EOF) {
            switch (ch) {
            case 'I': {
                in_addr_t ipAddr = inet_addr(optarg);

                if ((in_addr_t) -1 == ipAddr) {
                    (void) fprintf(stderr, "Interface specification \"%s\" "
                            "isn't an IP address\n", optarg);
                    exit(1);
                }

                locIpAddr = ipAddr;

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                break;
            case 'l':
                logfname = optarg;
                break;
            case 'q':
                pqfname = optarg;
                setQueuePath(optarg);
                break;
            case 'o':
                toffset = atoi(optarg);
                if (toffset == 0 && *optarg != '0') {
                    (void) fprintf(stderr, "%s: invalid offset %s\n", av[0],
                            optarg);
                    usage(av[0]);
                }
                break;
            case 'P': {
                char* suffix = "";
                long port;

                errno = 0;
                port = strtol(optarg, &suffix, 0);

                if (0 != errno || 0 != *suffix || 0 >= port || 0xffff < port) {

                    (void) fprintf(stderr, "%s: invalid port %s\n", av[0],
                            optarg);
                    usage(av[0]);
                }

                ldmPort = (unsigned) port;

                break;
            }
            case 'M': {
                int max = atoi(optarg);
                if (max < 0) {
                    (void) fprintf(stderr,
                            "%s: invalid maximum number of clients %s\n", av[0],
                            optarg);
                    usage(av[0]);
                }
                maxClients = max;
                break;
            }
            case 'm':
                max_latency = atoi(optarg);
                if (max_latency <= 0) {
                    (void) fprintf(stderr, "%s: invalid max_latency %s\n",
                            av[0], optarg);
                    usage(av[0]);
                }
                break;
            case 'n':
                doSomething = 0;
                break;
            case 't':
                rpctimeo = (unsigned) atoi(optarg);
                if (rpctimeo == 0 || rpctimeo > 32767) {
                    (void) fprintf(stderr, "%s: invalid timeout %s", av[0],
                            optarg);
                    usage(av[0]);
                }
                break;
            case '?':
                usage(av[0]);
                break;
            } /* "switch" statement */
        } /* argument loop */

        if (ac - optind == 1)
            setLdmdConfigPath(av[optind]);
        (void) setulogmask(logmask);

        if (toffset != TOFFSET_NONE && toffset > max_latency) {
            (void) fprintf(stderr,
                    "%s: invalid toffset (%d) > max_latency (%d)\n", av[0],
                    toffset, max_latency);
            usage(av[0]);
        }
    } /* command-line argument decoding */

#ifndef DONTFORK
    /* 
     * daemon behavior
     *
     * Background the process unless we are logging to stderr, in which
     * case we assume interactive.
     */
    if (logfname == NULL || *logfname != '-') {
        /* detach */
        pid_t pid;
        pid = ldmfork();
        if (pid == -1) {
            log_add("Couldn't fork LDM daemon");
            log_log(LOG_ERR);
            exit(2);
        }

        if (pid > 0) {
            /* parent */
            (void) printf("%ld\n", (long) pid);
            exit(0);
        }

        /* detach the child from parents process group ?? */
        (void) setsid();
    }
#endif

    /*
     * Initialize logger.
     * (Close fd 2 to remap stderr to the logfile, when
     * appropriate. I know, this is anal.)
     */
    if (logfname == NULL )
        (void) fclose(stderr);
    else if (!(logfname[0] == '-' && logfname[1] == 0))
        (void) close(2);
    (void) openulog(ubasename(av[0]), (LOG_CONS | LOG_PID), LOG_LDM, logfname);
    unotice("Starting Up (version: %s; built: %s %s)", PACKAGE_VERSION,
            __DATE__, __TIME__);

    /*
     * register exit handler
     */
    if (atexit(cleanup) != 0) {
        serror("atexit");
        unotice("Exiting");
        exit(1);
    }

    /*
     * set up signal handlers
     */
    set_sigactions();

    /*
     * Close the standard input and standard output streams because they won't
     * be used (more anality :-)
     */
    (void) fclose(stdout);
    (void) fclose(stdin);

    if (!doSomething) {
        /*
         * Vet the configuration file.
         */
        udebug("main(): Vetting configuration-file");
        if (read_conf(getLdmdConfigPath(), doSomething, ldmPort) != 0) {
            log_log(LOG_ERR);
            exit(1);
        }
    }
    else {
        /*
         * Create a service portal. This should be done before anything is
         * created because this is the function that relinquishes superuser
         * privileges.
         */
        udebug("main(): Creating service portal");
        if (create_ldm_tcp_svc(&sock, locIpAddr, ldmPort) != ENOERR) {
            /* error reports are emitted from create_ldm_tcp_svc() */
            exit(1);
        }
        udebug("tcp sock: %d", sock);

        /*
         * Verify that the product-queue can be open for writing.
         */
        udebug("main(): Opening product-queue");
        if (status = pq_open(pqfname, PQ_DEFAULT, &pq)) {
            if (PQ_CORRUPT == status) {
                uerror("The product-queue \"%s\" is inconsistent", pqfname);
            }
            else {
                uerror("pq_open failed: %s: %s", pqfname, strerror(status));
            }
            exit(1);
        }
        (void) pq_close(pq);
        pq = NULL;

        /*
         * Create the sharable database of upstream LDM metadata.
         */
        udebug("main(): Creating shared upstream LDM database");
        if (status = uldb_delete(NULL)) {
            if (ULDB_EXIST == status) {
                log_clear();
            }
            else {
                LOG_ADD0(
                        "Couldn't delete existing shared upstream LDM database");
                log_log(LOG_ERR);
                exit(1);
            }
        }
        if (uldb_create(NULL, maxClients * 1024)) {
            LOG_ADD0("Couldn't create shared upstream LDM database");
            log_log(LOG_ERR);
            exit(1);
        }

        /*
         * Read the configuration file (downstream LDM-s are started).
         */
        udebug("main(): Reading configuration-file");
        if (read_conf(getLdmdConfigPath(), doSomething, ldmPort) != 0) {
            log_log(LOG_ERR);
            exit(1);
        }

        /*
         * Serve
         */
        udebug("main(): Serving socket");
        sock_svc(sock);
    } /* "doSomething" is true */

    return (0);
}
コード例 #2
0
ファイル: pqsurf.c プロジェクト: funnelfiasco/LDM
int main(int ac, char *av[])
{
        const char* pqfname = getQueuePath();
        const char *opqfname = getSurfQueuePath();
        const char *progname = ubasename(av[0]);
        char *logfname;
        prod_class_t clss;
        prod_spec spec;
        int status = 0;
        unsigned interval = DEFAULT_INTERVAL;
        int logoptions = (LOG_CONS|LOG_PID);
        double age = DEFAULT_AGE;
        /* these are containers for the pqact args */
        char *argv[16];
        int argc = 0;
        int toffset = TOFFSET_NONE;

        logfname = "";

        if(set_timestamp(&clss.from) != ENOERR) /* corrected by toffset below */
        {
                int errnum = errno;
                fprintf(stderr, "Couldn't set timestamp: %s", 
                        strerror(errnum));
                exit(1);
        }
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;
        
        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = DEFAULT_PATTERN;

        memset(argv, 0, sizeof(argv));
        argv[0] = "pqact";
        argc++;

        {
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int logmask = (LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING) |
            LOG_MASK(LOG_NOTICE));
        int fterr;
        const char *conffilename = getPqsurfConfigPath();
        const char *datadir = getPqsurfDataDirPath();

        usePil = 1;
        opterr = 1;

        while ((ch = getopt(ac, av, "vxl:d:f:p:q:Q:o:i:a:t:")) != EOF)
                switch (ch) {
                case 'v':
                        argv[argc++] = "-v";
                        logmask |= LOG_MASK(LOG_INFO);
                        break;
                case 'x':
                        argv[argc++] = "-x";
                        logmask |= LOG_MASK(LOG_DEBUG);
                        break;
                case 'l':
                        argv[argc++] = "-l";
                        argv[argc++] = optarg;
                        logfname = optarg;
                        break;
                case 'd':
                        datadir = optarg;
                        break;
                case 'f':
                        fterr = strfeedtypet(optarg, &spec.feedtype);
                        if(fterr != FEEDTYPE_OK)
                        {
                                fprintf(stderr, "%s: %s: \"%s\"\n",
                                        av[0], strfeederr(fterr), optarg);
                                usage(progname);        
                        }
                        argv[argc++] = "-f";
                        argv[argc++] = optarg;
                        break;
                case 'p':
                        spec.pattern = optarg;
                        /* compiled below */
                        break;
                case 'q':
                        pqfname = optarg;
                        break;
                case 'Q':
                        opqfname = optarg;
                        break;
                case 'o':
                        toffset = atoi(optarg);
                        if(toffset == 0 && *optarg != '0')
                        {
                                fprintf(stderr, "%s: invalid offset %s\n",
                                         av[0], optarg);
                                usage(av[0]);   
                        }
                        argv[argc++] = "-o";
                        argv[argc++] = optarg;
                        break;
                case 'i':
                        interval = atoi(optarg);
                        if(interval == 0 && *optarg != '0')
                        {
                                fprintf(stderr, "%s: invalid interval \"%s\"\n",
                                        av[0], optarg);
                                usage(av[0]);
                        }
                        /* N.B. -i just used for input queue. */
                        break;
                case 'a':
                        age = atof(optarg);
                        if(age < 0.)
                        {
                            (void) fprintf(stderr,
                                        "age (%s) must be non negative\n",
                                        optarg);
                                usage(av[0]);   
                        }
                        break;
                case 't':
                        /* pipe_timeo */
                        argv[argc++] = "-t";
                        argv[argc++] = optarg;
                        break;
                case '?':
                        usage(progname);
                        break;
                }

        (void) setulogmask(logmask);

        if (re_isPathological(spec.pattern))
        {
                fprintf(stderr, "Adjusting pathological regular-expression: "
                    "\"%s\"\n", spec.pattern);
                re_vetSpec(spec.pattern);
        }
        status = regcomp(&spec.rgx,
                spec.pattern,
                REG_EXTENDED|REG_NOSUB);
        if(status != 0)
        {
                fprintf(stderr, "Bad regular expression \"%s\"\n",
                        spec.pattern);
                usage(av[0]);
        }

        if(ac - optind == 1)
                conffilename = av[optind];

        argv[argc++] = "-d";
        argv[argc++] = (char*)datadir;
        argv[argc++] = "-q";
        argv[argc++] = (char*)opqfname;
        argv[argc++] = (char*)conffilename;

        age *= 3600.;

        }

        if(toffset != TOFFSET_NONE)
        {
                clss.from.tv_sec -= toffset;
        }
        else
        {
                clss.from.tv_sec -= (age - interval);
        }


        /*
         * Set up error logging.
         * N.B. log ident is the remote
         */
        (void) openulog(progname,
                logoptions, LOG_LDM, logfname);
        unotice("Starting Up (%d)", getpgrp());

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(1);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();


        /*
         * Open the output product queue
         */
        status = pq_open(opqfname, PQ_DEFAULT, &opq);
        if(status)
        {
                if (PQ_CORRUPT == status) {
                    uerror("The output product-queue \"%s\" is inconsistent\n",
                            opqfname);
                }
                else {
                    uerror("pq_open failed: %s: %s\n",
                            opqfname, strerror(status));
                }
                exit(1);
        }


        act_pid = run_child(argc, argv);
        if(act_pid == (pid_t)-1)
                exit(1);

        /*
         * Open the input product queue
         */
        status = pq_open(pqfname, PQ_READONLY, &pq);
        if(status)
        {
                if (PQ_CORRUPT == status) {
                    uerror("The product-queue \"%s\" is inconsistent\n",
                            pqfname);
                }
                else {
                    uerror("pq_open failed: %s: %s\n",
                            pqfname, strerror(status));
                }
                exit(1);
        }
        if(toffset == TOFFSET_NONE)
        {
                /* Jump to the end of the queue */
                timestampt sav;
                sav = clss.from;
                clss.from = TS_ZERO;
                (void) pq_last(pq, &clss, NULL);
                clss.from = sav;
        }
        else
        {
                pq_cset(pq, &clss.from);
        }

        if(ulogIsVerbose())
        {
                char buf[1984];
                uinfo("%s",
                         s_prod_class(buf, sizeof(buf), &clss));
        }

        while(exitIfDone(0))
        {
                if(stats_req)
                {
                        dump_stats();
                        stats_req = 0;
                }

                status = pq_sequence(pq, TV_GT, &clss, split_prod, NULL);

                switch(status) {
                case 0: /* no error */
                        continue; /* N.B., other cases sleep */
                case PQUEUE_END:
                        udebug("surf: End of Queue");
                        break;
                case EAGAIN:
                case EACCES:
                        udebug("Hit a lock");
                        break;
                default:
                        uerror("pq_sequence failed: %s (errno = %d)",
                                strerror(status), status);
                        exit(1);
                        break;
                }

                if(interval == 0)
                {
                        break;
                }


                (void) expire(opq, interval, age);

                pq_suspend(interval);

                (void) reap_act(WNOHANG);
        }

        /*
         * TODO: how can we determine that pqact has finished
         *       the work in opq?
         */
        sleep(5);

        exit(0);
}
コード例 #3
0
ファイル: pqinsert.c プロジェクト: khallock/LDM
int main(
        int ac,
        char *av[]
)
{
        const char* const       pqfname = getQueuePath();
        const char* const progname = ubasename(av[0]);
        int useProductID = FALSE;
        int signatureFromId = FALSE;
        char *productID = NULL;
        int multipleFiles = FALSE;
        char identifier[KEYSIZE];
        int status;
        int seq_start = 0;
        enum ExitCode {
            exit_success = 0,   /* all files inserted successfully */
            exit_system = 1,    /* operating-system failure */
            exit_pq_open = 2,   /* couldn't open product-queue */
            exit_infile = 3,    /* couldn't process input file */
            exit_dup = 4,       /* input-file already in product-queue */
            exit_md5 = 6        /* couldn't initialize MD5 processing */
        } exitCode = exit_success;

#if !USE_MMAP
        pqeIndex = PQE_NONE;
#endif

        {
            extern int optind;
            extern int opterr;
            extern char *optarg;
            int ch;

            (void) openulog(progname, LOG_NOTIME, LOG_LDM, "-");
            (void) setulogmask(LOG_UPTO(LOG_NOTICE));

            opterr = 0; /* Suppress getopt(3) error messages */

            while ((ch = getopt(ac, av, ":ivxl:q:f:s:p:")) != EOF)
                    switch (ch) {
                    case 'i':
                            signatureFromId = 1;
                            break;
                    case 'v':
                            (void) setulogmask(getulogmask() | LOG_MASK(LOG_INFO));
                            break;
                    case 'x':
                            (void) setulogmask(getulogmask() | LOG_MASK(LOG_DEBUG));
                            break;
                    case 'l':
                            openulog(progname, ulog_get_options(), LOG_LDM, optarg);
                            break;
                    case 'q':
                            setQueuePath(optarg);
                            break;
                    case 's':
                            seq_start = atoi(optarg);
                            break;
                    case 'f':
                            feedtype = atofeedtypet(optarg);
                            if(feedtype == NONE)
                            {
                                fprintf(stderr, "Unknown feedtype \"%s\"\n", optarg);
                                    usage(progname);
                            }
                            break;
                    case 'p':
                            useProductID = TRUE;
                            productID = optarg;
                            break;
                    case ':': {
                        LOG_ADD1("Option \"-%c\" requires an operand", optopt);
                        usage(progname);
                    }
                    /* no break */
                    default:
                        LOG_ADD1("Unknown option: \"%c\"", optopt);
                        usage(progname);
                        /* no break */
                    }

            ac -= optind; av += optind ;

            if(ac < 1) usage(progname);
            }

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(exit_system);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        /*
         * who am i, anyway
         */
        (void) strncpy(myname, ghostname(), sizeof(myname));
        myname[sizeof(myname)-1] = 0;

        /*
         * open the product queue
         */
        if(status = pq_open(pqfname, PQ_DEFAULT, &pq))
        {
                if (PQ_CORRUPT == status) {
                    uerror("The product-queue \"%s\" is inconsistent\n",
                            pqfname);
                }
                else {
                    uerror("pq_open: \"%s\" failed: %s",
                            pqfname, status > 0 ? strerror(status) :
                                            "Internal error");
                }
                exit(exit_pq_open);
        }


        {
        char *filename;
        int fd;
        struct stat statb;
        product prod;
        MD5_CTX *md5ctxp = NULL;

        /*
         * Allocate an MD5 context
         */
        md5ctxp = new_MD5_CTX();
        if(md5ctxp == NULL)
        {
                serror("new_md5_CTX failed");
                exit(exit_md5);
        }


        /* These members are constant over the loop. */
        prod.info.origin = myname;
        prod.info.feedtype = feedtype;

        if (ac > 1) {
          multipleFiles = TRUE;
        }

        for(prod.info.seqno = seq_start ; ac > 0 ;
                         av++, ac--, prod.info.seqno++)
        {
                filename = *av;

                fd = open(filename, O_RDONLY, 0);
                if(fd == -1)
                {
                        serror("open: %s", filename);
                        exitCode = exit_infile;
                        continue;
                }

                if( fstat(fd, &statb) == -1) 
                {
                        serror("fstat: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                /* Determine what to use for product identifier */
                if (useProductID) 
                  {
                    if (multipleFiles) 
                      {
                        sprintf(identifier,"%s.%d", productID, prod.info.seqno);
                        prod.info.ident = identifier;
                      }
                    else
                      prod.info.ident = productID;
                   }
                else
                    prod.info.ident = filename;
                
                prod.info.sz = statb.st_size;
                prod.data = NULL;

                /* These members, and seqno, vary over the loop. */
                status = set_timestamp(&prod.info.arrival);
                if(status != ENOERR) {
                        serror("set_timestamp: %s, filename");
                        exitCode = exit_infile;
                        continue;
                }

#if USE_MMAP
                prod.data = mmap(0, prod.info.sz,
                        PROT_READ, MAP_PRIVATE, fd, 0);
                if(prod.data == NULL)
                {
                        serror("mmap: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                status = 
                    signatureFromId
                        ? mm_md5(md5ctxp, prod.info.ident,
                            strlen(prod.info.ident), prod.info.signature)
                        : mm_md5(md5ctxp, prod.data, prod.info.sz,
                            prod.info.signature);

                (void)exitIfDone(1);

                if (status != 0) {
                    serror("mm_md5: %s", filename);
                    (void) munmap(prod.data, prod.info.sz);
                    (void) close(fd);
                    exitCode = exit_infile;
                    continue;
                }

                /* These members, and seqno, vary over the loop. */
                status = set_timestamp(&prod.info.arrival);
                if(status != ENOERR) {
                        serror("set_timestamp: %s, filename");
                        exitCode = exit_infile;
                        continue;
                }

                /*
                 * Do the deed
                 */
                status = pq_insert(pq, &prod);

                switch (status) {
                case ENOERR:
                    /* no error */
                    if(ulogIsVerbose())
                        uinfo("%s", s_prod_info(NULL, 0, &prod.info,
                            ulogIsDebug())) ;
                    break;
                case PQUEUE_DUP:
                    uerror("Product already in queue: %s",
                        s_prod_info(NULL, 0, &prod.info, 1));
                    exitCode = exit_dup;
                    break;
                case PQUEUE_BIG:
                    uerror("Product too big for queue: %s",
                        s_prod_info(NULL, 0, &prod.info, 1));
                    exitCode = exit_infile;
                    break;
                case ENOMEM:
                    uerror("queue full?");
                    exitCode = exit_system;
                    break;  
                case EINTR:
#if defined(EDEADLOCK) && EDEADLOCK != EDEADLK
                case EDEADLOCK:
                    /*FALLTHROUGH*/
#endif
                case EDEADLK:
                    /* TODO: retry ? */
                    /*FALLTHROUGH*/
                default:
                    uerror("pq_insert: %s", status > 0
                        ? strerror(status) : "Internal error");
                    break;
                }

                (void) munmap(prod.data, prod.info.sz);
#else // USE_MMAP above; !USE_MMAP below
                status = 
                    signatureFromId
                        ? mm_md5(md5ctxp, prod.info.ident,
                            strlen(prod.info.ident), prod.info.signature)
                        : fd_md5(md5ctxp, fd, statb.st_size,
                            prod.info.signature);

                (void)exitIfDone(1);

                if (status != 0) {
                        serror("xx_md5: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                if(lseek(fd, 0, SEEK_SET) == (off_t)-1)
                {
                        serror("rewind: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                pqeIndex = PQE_NONE;
                status = pqe_new(pq, &prod.info, &prod.data, &pqeIndex);

                if(status != ENOERR) {
                    serror("pqe_new: %s", filename);
                    exitCode = exit_infile;
                }
                else {
                    ssize_t     nread = read(fd, prod.data, prod.info.sz);

                    (void)exitIfDone(1);

                    if (nread != prod.info.sz) {
                        serror("read %s %u", filename, prod.info.sz);
                        status = EIO;
                    }
                    else {
                        status = pqe_insert(pq, pqeIndex);
                        pqeIndex = PQE_NONE;

                        switch (status) {
                        case ENOERR:
                            /* no error */
                            if(ulogIsVerbose())
                                uinfo("%s", s_prod_info(NULL, 0, &prod.info,
                                    ulogIsDebug())) ;
                            break;
                        case PQUEUE_DUP:
                            uerror("Product already in queue: %s",
                                s_prod_info(NULL, 0, &prod.info, 1));
                            exitCode = exit_dup;
                            break;
                        case ENOMEM:
                            uerror("queue full?");
                            break;  
                        case EINTR:
#if defined(EDEADLOCK) && EDEADLOCK != EDEADLK
                        case EDEADLOCK:
                            /*FALLTHROUGH*/
#endif
                        case EDEADLK:
                            /* TODO: retry ? */
                            /*FALLTHROUGH*/
                        default:
                            uerror("pq_insert: %s", status > 0
                                ? strerror(status) : "Internal error");
                        }
                    }                   /* data read into `pqeIndex` region */

                    if (status != ENOERR) {
                        (void)pqe_discard(pq, pqeIndex);
                        pqeIndex = PQE_NONE;
                    }
                }                       /* `pqeIndex` region allocated */

#endif
                (void) close(fd);
        }                               /* input-file loop */

        free_MD5_CTX(md5ctxp);  
        }                               /* code block */

        exit(exitCode);
}
コード例 #4
0
ファイル: notifyme.c プロジェクト: Unidata/LDM
int main(int ac, char *av[])
{
        unsigned      timeo = DEFAULT_TIMEO;
        unsigned      interval = DEFAULT_TIMEO;
        unsigned      TotalTimeo = DEFAULT_TOTALTIMEO;
        prod_spec     spec;
        int           status;
        prod_class_t* clssp;

        /*
         * initialize logger
         */
        if (log_init(av[0])) {
            log_syserr("Couldn't initialize logging module");
            exit(1);
        }

        if(set_timestamp(&clss.from) != 0)
        {
                fprintf(stderr, "Couldn't set timestamp\n");
                exit(1);
        }
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;
        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = DEFAULT_PATTERN;

        { /* Begin getopt block */
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int fterr;

        opterr = 1;

        while ((ch = getopt(ac, av, "vxl:f:o:t:h:P:p:T:")) != EOF)
                switch (ch) {
                case 'v':
                        if (!log_is_enabled_info)
                            log_set_level(LOG_LEVEL_INFO);
                        break;
                case 'x':
                        log_set_level(LOG_LEVEL_DEBUG);
                        break;
                case 'l':
                        if (log_set_destination(optarg)) {
                            log_syserr("Couldn't set logging destination to \"%s\"",
                                    optarg);
                            usage(av[0]);
                        }
                        break;
                case 'h':
                        remote = optarg;
                        break;
                case 'P': {
                    log_warning("Port specification is ignored");
                    break;
                }
                case 'p':
                        spec.pattern = optarg;
                        /* compiled below */
                        break;
                case 'f':
                        fterr = strfeedtypet(optarg, &spec.feedtype);
                        if(fterr != FEEDTYPE_OK)
                        {
                                fprintf(stderr, "Bad feedtype \"%s\", %s\n",
                                        optarg, strfeederr(fterr));
                                usage(av[0]);   
                        }
                        break;
                case 'o':
                        clss.from.tv_sec -= atoi(optarg);
                        break;
                case 'T':
                        TotalTimeo = atoi(optarg);
                        if(TotalTimeo == 0)
                        {
                                fprintf(stderr, "%s: invalid TotalTimeo %s", av[0], optarg);
                                usage(av[0]);   
                        }
                        break;
                case 't':
                        timeo = (unsigned)atoi(optarg);
                        if(timeo == 0 || timeo > 32767)
                        {
                                fprintf(stderr, "%s: invalid timeout %s", av[0], optarg);
                                usage(av[0]);   
                        }
                        break;
                case '?':
                        usage(av[0]);
                        break;
                }

        if(ac - optind > 0)
                usage(av[0]);

        if (re_isPathological(spec.pattern))
        {
                fprintf(stderr, "Adjusting pathological regular-expression: "
                    "\"%s\"\n", spec.pattern);
                re_vetSpec(spec.pattern);
        }
        status = regcomp(&spec.rgx,
                spec.pattern,
                REG_EXTENDED|REG_NOSUB);
        if(status != 0)
        {
                fprintf(stderr, "Bad regular expression \"%s\"\n",
                        spec.pattern);
                usage(av[0]);
        }

        if(TotalTimeo < timeo)
        {
                fprintf(stderr, "TotalTimeo %u < timeo %u\n",
                         TotalTimeo, timeo);
                usage(av[0]);
        }

        } /* End getopt block */

        log_notice_q("Starting Up: %s: %s",
                        remote,
                        s_prod_class(NULL, 0, &clss));

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                log_syserr("atexit");
                exit(1);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();


        /*
         * Try forever.
         */
        while (exitIfDone(0))
        {
                clssp = &clss;
                status = forn5(NOTIFYME, remote, &clssp,
                                timeo, TotalTimeo, notifymeprog_5);

                (void)exitIfDone(0);

                switch(status) {
                        /* problems with remote, retry */       
                case ECONNABORTED:
                case ECONNRESET:
                case ETIMEDOUT:
                case ECONNREFUSED:
                        sleep(interval);
                        break;
                case 0:
                        /* assert(done); */
                        break;
                default:
                        /* some wierd error */
                        done = 1;
                        exit(1);
                }
        }

        exit(0);
        /*NOTREACHED*/
}
コード例 #5
0
int
main(int ac, char *av[])
{
        int          status = 0;
        char*        logfname = 0;
        /// Data directory, conffile paths may be relative
        const char*  datadir;
        int          interval = DEFAULT_INTERVAL;
        prod_spec    spec;
        prod_class_t clss;
        int          toffset = TOFFSET_NONE;
        int          loggingToStdErr = 0;
        unsigned     queue_size = 5000;
        const char*  progname = basename(av[0]);
        unsigned     logopts = LOG_CONS|LOG_PID;

        /*
         * Setup default logging before anything else.
         */
        (void)log_init(progname);

        const char*  pqfname = getQueuePath();

        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = DEFAULT_PATTERN;

        if(set_timestamp(&clss.from)) /* corrected by toffset below */
        {
                int errnum = errno;
                log_error("Couldn't set timestamp: %s", strerror(errnum));
                exit(EXIT_FAILURE);
                /*NOTREACHED*/
        }
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;

        /*
         * deal with the command line, set options
         */
        {
            extern int optind;
            extern int opterr;
            extern char *optarg;

            int ch;
            int fterr;

            opterr = 1;

            while ((ch = getopt(ac, av, "vxel:d:f:q:o:p:i:t:")) != EOF) {
                switch (ch) {
                case 'v':
                        if (!log_is_enabled_info)
                            (void)log_set_level(LOG_LEVEL_INFO);
                        break;
                case 'x':
                        (void)log_set_level(LOG_LEVEL_DEBUG);
                        break;
                case 'e':
                        key = ftok("/etc/rc.d/rc.local",'R');
                        semkey = ftok("/etc/rc.d/rc.local",'e');
                        shmid = shmget(key, sizeof(edex_message) * queue_size,
                                0666 | IPC_CREAT);
                        semid = semget(semkey, 2, 0666 | IPC_CREAT);
                        break;
                case 'l':
                        logfname = optarg;
                        (void)log_set_destination(logfname);
                        break;
                case 'd':
                        setPqactDataDirPath(optarg);
                        break;
                case 'f':
                        fterr = strfeedtypet(optarg, &spec.feedtype);
                        if(fterr != FEEDTYPE_OK)
                        {
                                log_error("Bad feedtype \"%s\", %s\n",
                                        optarg, strfeederr(fterr));
                                usage(progname);
                        }
                        break;
                case 'q':
                        pqfname = optarg;
                        break;
                case 'o':
                        toffset = atoi(optarg);
                        if(toffset == 0 && *optarg != '0')
                        {
                                log_error("invalid offset %s\n", optarg);
                                usage(progname);   
                        }
                        break;
                case 'i':
                        interval = atoi(optarg);
                        if(interval == 0 && *optarg != '0')
                        {
                                log_error("invalid interval %s\n", optarg);
                                usage(progname);   
                        }
                        break;
                case 't':
                        pipe_timeo = atoi(optarg);
                        if(pipe_timeo == 0 && *optarg != 0)
                        {
                                log_error("invalid pipe_timeo %s", optarg);
                                usage(progname);   
                        }
                        break;
                case 'p':
                        spec.pattern = optarg;
                        break;
                default:
                        usage(progname);
                        break;
                }
            }

            conffilename = getPqactConfigPath();
            datadir = getPqactDataDirPath();

            {
                int numOperands = ac - optind;

                if (1 < numOperands) {
                    log_error("Too many operands");
                    usage(progname);
                }
                else if (1 == numOperands) {
                    conffilename = av[optind];
                }
            }
        }

        setQueuePath(pqfname);
        log_notice("Starting Up");

        if ('/' != conffilename[0]) {
            /*
             * The pathname of the configuration-file is relative. Convert it
             * to absolute so that it can be (re)read even if the current
             * working directory changes.
             */
#ifdef PATH_MAX
            char    buf[PATH_MAX];          /* includes NUL */
#else
            char    buf[_POSIX_PATH_MAX];   /* includes NUL */
#endif
            if (getcwd(buf, sizeof(buf)) == NULL) {
                log_syserr("Couldn't get current working directory");
                exit(EXIT_FAILURE);
            }
            (void)strncat(buf, "/", sizeof(buf)-strlen(buf)-1);
            (void)strncat(buf, conffilename, sizeof(buf)-strlen(buf)-1);
            conffilename = strdup(buf);
            if (conffilename == NULL) {
                log_syserr("Couldn't duplicate string \"%s\"", buf);
                exit(EXIT_FAILURE);
            }
        }

        /*
         * Initialize the previous-state module for this process.
         */
        if (stateInit(conffilename) < 0) {
            log_error("Couldn't initialize previous-state module");
            exit(EXIT_FAILURE);
            /*NOTREACHED*/
        }

        /*
         * Configure the standard I/O streams for execution of child processes.
         */
        if (configure_stdio_file_descriptors()) {
            log_error("Couldn't configure standard I/O streams for execution "
                    "of child processes");
            exit(EXIT_FAILURE);
        }

        /*
         * Inform the "filel" module about the number of available file
         * descriptors.  File descriptors are reserved for stdin, stdout,
         * stderr, the product-queue, the configuration-file, and (possibly) 
         * logging.
         */
        if (0 != set_avail_fd_count(openMax() - 6))
        {
            log_error("Couldn't set number of available file-descriptors");
            log_notice("Exiting");
            exit(EXIT_FAILURE);
            /*NOTREACHED*/
        }

        /*
         * Inform the "filel" module of the shared memory segment
         */
        if (shmid != -1 && semid != -1)
        {
            set_shared_space(shmid, semid, queue_size);
        }

        /*
         * Compile the pattern.
         */
        if (re_isPathological(spec.pattern))
        {
                log_error("Adjusting pathological regular-expression: \"%s\"",
                    spec.pattern);
                re_vetSpec(spec.pattern);
        }
        status = regcomp(&spec.rgx, spec.pattern, REG_EXTENDED|REG_NOSUB);
        if(status != 0)
        {
                log_error("Can't compile regular expression \"%s\"",
                        spec.pattern);
                log_notice("Exiting");
                exit(EXIT_FAILURE);
                /*NOTREACHED*/
        }

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                log_syserr("atexit");
                log_notice("Exiting");
                exit(EXIT_FAILURE);
                /*NOTREACHED*/
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        /*
         * Read in (compile) the configuration file.  We do this first so
         * its syntax may be checked without opening a product queue.
         */
        if ((status = readPatFile(conffilename)) < 0) {
                exit(EXIT_FAILURE);
                /*NOTREACHED*/
        }
        else if (status == 0) {
            log_notice("Configuration-file \"%s\" has no entries. "
                "You should probably not start this program instead.",
                conffilename);
        }

        /*
         * Open the product queue
         */
        status = pq_open(pqfname, PQ_READONLY, &pq);
        if(status)
        {
                if (PQ_CORRUPT == status) {
                    log_error("The product-queue \"%s\" is inconsistent\n",
                            pqfname);
                }
                else {
                    log_error("pq_open failed: %s: %s\n",
                            pqfname, strerror(status));
                }
                exit(EXIT_FAILURE);
                /*NOTREACHED*/
        }

        if(toffset != TOFFSET_NONE) {
            /*
             * Filter and queue position set by "toffset".
             */
            clss.from.tv_sec -= toffset;
            pq_cset(pq, &clss.from);
        }
        else {
            bool       startAtTailEnd = true;
            timestampt insertTime;

            clss.from = TS_ZERO;

            /*
             * Try getting the insertion-time of the last,
             * successfully-processed data-product from the previous session.
             */
            status = stateRead(&insertTime);

            if (status) {
                log_warning("Couldn't get insertion-time of last-processed "
                        "data-product from previous session");
            }
            else {
                timestampt now;
                (void)set_timestamp(&now);

                if (tvCmp(now, insertTime, <)) {
                    log_warning("Time of last-processed data-product from previous "
                            "session is in the future");
                }
                else {
                    char buf[80];
                    (void)strftime(buf, sizeof(buf), "%Y-%m-%d %T",
                        gmtime(&insertTime.tv_sec));
                    log_notice("Starting from insertion-time %s.%06lu UTC", buf,
                        (unsigned long)insertTime.tv_usec);

                    pq_cset(pq, &insertTime);
                    startAtTailEnd = false;
                }
            }

            if (startAtTailEnd) {
                log_notice("Starting at tail-end of product-queue");
                (void)pq_last(pq, &clss, NULL);
            }
        }
コード例 #6
0
ファイル: pqcheck.c プロジェクト: PatrickHildreth-NOAA/LDM
/*
 * Returns:
 *      0       Success.  Write-count of product-queue is zero.
 *      1       System failure.  See error-message.
 *      2       Product-queue doesn't support a writer-counter.  Not possible
 *              if "-F" option used.
 *      3       Write-count of product-queue is greater than zero.  Not possible
 *              if "-F" option used.
 *      4       The product-queue is internally inconsistent.
 */
int main(int ac, char *av[])
{
        const char *progname = ubasename(av[0]);
        char *logfname;
        int status = 0;
        int logoptions = (LOG_CONS|LOG_PID) ;
        unsigned write_count;
        int force = 0;

        logfname = "";

        if(isatty(fileno(stderr)))
        {
                /* set interactive defaults */
                logfname = "-" ;
                logoptions = 0 ;
        }

        {
            extern int opterr;
            extern char *optarg;
            int ch;
            int logmask = (LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING) |
                LOG_MASK(LOG_NOTICE));

            opterr = 1;
            pqfname = getQueuePath();

            while ((ch = getopt(ac, av, "Fvxl:q:")) != EOF)
                    switch (ch) {
                    case 'F':
                            force = 1;
                            break;
                    case 'v':
                            logmask |= LOG_MASK(LOG_INFO);
                            break;
                    case 'x':
                            logmask |= LOG_MASK(LOG_DEBUG);
                            break;
                    case 'l':
                            logfname = optarg;
                            break;
                    case 'q':
                            pqfname = optarg;
                            break;
                    case '?':
                            usage(progname);
                            break;
                    }

            (void) setulogmask(logmask);
        }

        /*
         * Set up error logging.
         */
        (void) openulog(progname,
                logoptions, LOG_LDM, logfname);
        unotice("Starting Up (%d)", getpgrp());

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                return 1;
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        if (force) {
            /*
             * Add writer-counter capability to the file, if necessary, and set
             * the writer-counter to zero.
             */
            status = pq_clear_write_count(pqfname);
            if (status) {
                if (PQ_CORRUPT == status) {
                    uerror("The product-queue \"%s\" is inconsistent", pqfname);
                    return 4;
                }
                else {
                    uerror("pq_clear_write_count() failure: %s: %s",
                            pqfname, strerror(status));
                    return 1;
                }
            }
            write_count = 0;
        }
        else {
            /*
             * Get the writer-counter of the product-queue.
             */
            status = pq_get_write_count(pqfname, &write_count);
            if (status) {
                if (ENOSYS == status) {
                    uerror("Product-queue \"%s\" doesn't have a writer-counter",
                        pqfname);
                    return 2;
                }
                else if (PQ_CORRUPT == status) {
                    uerror("Product-queue \"%s\" is inconsistent", pqfname);
                    return 4;
                }
                else {
                    uerror("pq_get_write_count() failure: %s: %s",
                        pqfname, strerror(status));
                    return 1;
                }
            }
        }

        uinfo("The writer-counter of the product-queue is %u", write_count);

        return write_count == 0 ? 0 : 3;
}
コード例 #7
0
ファイル: noaaportIngester.c プロジェクト: semmerson/NOAAPORT
/**
 * Reads a NOAAPORT data stream, creates LDM data-products from the stream, and
 * inserts the data-products into an LDM product-queue.  The NOAAPORT data
 * stream can take the form of multicast UDP packets from (for example) a
 * Novra S300 DVB-S2 receiver or the standard input stream.
 *
 * Usage:
 *     noaaportIngester [-l <em>log</em>] [-n|-v|-x] [-q <em>queue</em>] [-u <em>n</em>] [-m <em>mcastAddr</em>] [-I <em>iface</em>] [-b <em>npages</em>]\n
 *
 * Where:
 * <dl>
 *      <dt>-b <em>npages</em></dt>
 *      <dd>Allocate \e npages pages of memory for the internal buffer.</dd>
 *
 *      <dt>-I <em>iface</em></dt>
 *      <dd>Listen for multicast packets on interface \e iface.</dd>
 *
 *      <dt>-l <em>log</em></dt>
 *      <dd>Log to file \e log. The default is to use the system logging daemon
 *      if the current process is a daemon; otherwise, the standard error
 *      stream is used.</dd>
 *
 *      <dt>-m <em>mcastAddr</em></dt>
 *      <dd>Use the multicast address \e mcastAddr. The default is to
 *      read from the standard input stream.</dd>
 *
 *      <dt>-n</dt>
 *      <dd>Log messages of level NOTE and higher priority. Each data-product
 *      will generate a log message.</dd>
 *
 *      <dt>-q <em>queue</em></dt>
 *      <dd>Use \e queue as the pathname of the LDM product-queue. The default
 *      is to use the default LDM pathname of the product-queue.</dd>
 *
 *      <dt>-u <em>n</em></dt>
 *      <dd>If logging is to the system logging daemon, then use facility 
 *      <b>local</b><em>n</em>. The default is to use the LDM facility.</dd>
 *
 *      <dt>-v</dt>
 *      <dd>Log messages of level INFO and higher priority.</dd>
 *
 *      <dt>-x</dt>
 *      <dd>Log messages of level DEBUG and higher priority.</dd>
 * </dl>
 *
 * If neither -n, -v, nor -x is specified, then logging will be restricted to
 * levels ERROR and WARN only.
 *
 * @retval 0 if successful.
 * @retval 1 if an error occurred. At least one error-message will be logged.
 */
int main(
    const int           argc,           /**< [in] Number of arguments */
    char* const         argv[])         /**< [in] Arguments */
{
    int                 status = 0;     /* default success */
    extern int          optind;
    extern int          opterr;
    int                 ch;
    const char* const   progName = ubasename(argv[0]);
    const char*         interface = NULL;
    int                 logmask = LOG_UPTO(LOG_WARNING);
    const unsigned      logOptions = LOG_CONS | LOG_PID;
    const char*         mcastSpec = NULL;
    const char*         prodQueuePath = NULL;
    size_t              npages = DEFAULT_NPAGES;
    Fifo*               fifo;
    int                 ttyFd = open("/dev/tty", O_RDONLY);
    int                 processPriority = 0;
    const char*         logPath = (-1 == ttyFd)
        ? NULL                          /* log to system logging daemon */
        : "-";                          /* log to standard error stream */

    (void)close(ttyFd);
    (void)setulogmask(logmask);

    status = initLogging(progName, logOptions, logFacility, logPath);
    opterr = 0;                         /* no error messages from getopt(3) */

    while (0 == status && (ch = getopt(argc, argv, "b:I:l:m:np:q:u:vx")) != -1)
    {
        switch (ch) {
            extern char*    optarg;
            extern int      optopt;

            case 'b': {
                unsigned long   n;

                if (sscanf(optarg, "%lu", &n) != 1) {
                    NPL_SERROR1("Couldn't decode FIFO size in pages: \"%s\"",
                            optarg);
                    status = 1;
                }
                else {
                    npages = n;
                }
            }
            case 'I':
                interface = optarg;
                break;
            case 'l':
                logPath = optarg;
                status = initLogging(progName, logOptions, logFacility,
                        logPath);
                break;
            case 'm':
                mcastSpec = optarg;
                break;
            case 'n':
                logmask |= LOG_MASK(LOG_NOTICE);
                (void)setulogmask(logmask);
                break;
            case 'p': {
                char* cp;

                errno = 0;
                processPriority = (int)strtol(optarg, &cp, 0);

                if (0 != errno) {
                    NPL_SERROR1("Couldn't decode priority \"%s\"", optarg);
                    nplLog(LOG_ERR);
                }
                else {
                    if (processPriority < -20)
                        processPriority = -20;
                    else if (processPriority > 20)
                        processPriority = 20;
                }

                break;
            }
            case 'q':
                prodQueuePath = optarg;
                break;
            case 'u': {
                int         i = atoi(optarg);

                if (0 > i || 7 < i) {
                    NPL_START1("Invalid logging facility number: %d", i);
                    status = 1;
                }
                else {
                    static int  logFacilities[] = {LOG_LOCAL0, LOG_LOCAL1,
                        LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5,
                        LOG_LOCAL6, LOG_LOCAL7};

                    logFacility = logFacilities[i];

                    status = initLogging(progName, logOptions, logFacility,
                            logPath);
                }

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                (void)setulogmask(logmask);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                (void)setulogmask(logmask);
                break;
            default:
                optopt = ch;
                /*FALLTHROUGH*/
            case '?': {
                nplError("Unknown option: \"%c\"", optopt);
                status = 1;
            }
        }                               /* option character switch */
    }                                   /* getopt() loop */

    if (0 == status) {
        if (optind < argc) {
            nplError("Extraneous command-line argument: \"%s\"",
                    argv[optind]);
            status = 1;
        }
    }

    if (0 != status) {
        nplError("Error decoding command-line");
        usage(progName);
    }
    else {
        nplNotice("Starting Up %s", PACKAGE_VERSION);
        nplNotice("%s", COPYRIGHT_NOTICE);

        if ((status = fifoNew(npages, &fifo)) != 0) {
            NPL_ADD0("Couldn't create FIFO");
            nplLog(LOG_ERR);
        }
        else {
            LdmProductQueue*    prodQueue;

            if ((status = lpqGet(prodQueuePath, &prodQueue)) != 0) {
                NPL_ADD0("Couldn't open LDM product-queue");
                nplLog(LOG_ERR);
            }
            else {
                if (NULL == mcastSpec) {
                    if (0 == (status = spawnProductMaker(NULL, fifo, prodQueue,
                                    &productMaker, &productMakerThread))) {
                        status = spawnFileReader(NULL, NULL, fifo, &reader,
                                &readerThread);
                    }
                }                               /* reading file */
                else {
                    pthread_attr_t  attr;

                    if (0 != (status = pthread_attr_init(&attr))) {
                        NPL_ERRNUM0(status,
                                "Couldn't initialize thread attribute");
                    }
                    else {
#ifndef _POSIX_THREAD_PRIORITY_SCHEDULING
                        nplWarn("Can't adjust thread priorities due to lack of "
                                "necessary support from environment");
#else
                        /*
                         * In order to not miss any data, the reader thread
                         * should preempt the product-maker thread as soon as
                         * data is available and run as long as data is
                         * available.
                         */
                        const int           SCHED_POLICY = SCHED_FIFO;
                        struct sched_param  param;

                        param.sched_priority =
                            sched_get_priority_max(SCHED_POLICY) - 1;

                        (void)pthread_attr_setinheritsched(&attr,
                                PTHREAD_EXPLICIT_SCHED);
                        (void)pthread_attr_setschedpolicy(&attr, SCHED_POLICY);
                        (void)pthread_attr_setschedparam(&attr, &param);
                        (void)pthread_attr_setscope(&attr,
                                PTHREAD_SCOPE_SYSTEM);
#endif
                        if (0 == (status = spawnProductMaker(&attr, fifo,
                                        prodQueue, &productMaker,
                                        &productMakerThread))) {
#ifdef _POSIX_THREAD_PRIORITY_SCHEDULING
                            param.sched_priority++;
                            (void)pthread_attr_setschedparam(&attr, &param);
#endif
                            status = spawnMulticastReader(&attr, mcastSpec,
                                    interface, fifo, &reader, &readerThread);
                        }                       /* product-maker spawned */
                    }                           /* "attr" initialized */
                }                               /* reading multicast packets */

                if (0 != status) {
                    nplLog(LOG_ERR);
                    status = 1;
                }
                else {
                    pthread_t   statThread;

                    (void)gettimeofday(&startTime, NULL);
                    reportTime = startTime;

                    (void)pthread_create(&statThread, NULL,
                            reportStatsWhenSignaled, NULL);

                    set_sigactions();

                    (void)pthread_join(readerThread, NULL);

                    status = readerStatus(reader);

                    (void)pthread_cancel(statThread);
                    (void)pthread_join(statThread, NULL);
                    (void)fifoCloseWhenEmpty(fifo);
                    (void)pthread_join(productMakerThread, NULL);

                    if (0 != status)
                        status = pmStatus(productMaker);

                    reportStats();
                    readerFree(reader);
                }               /* "reader" spawned */

                (void)lpqClose(prodQueue);
            }                       /* "prodQueue" open */
        }                           /* "fifo" created */
    }                               /* command line decoded */

    return status;
}
コード例 #8
0
int
main(int ac, char *av[])
{
        int logfd;
        int width;
        int ready;
        unsigned long idle;
        fd_set readfds;
        fd_set exceptfds;
        struct timeval timeo;
        const char* const progname = basename(av[0]);
        unsigned long maxProductSize = DEFAULT_MAX_PRODUCT_SIZE;

        /*
         * Setup default logging before anything else.
         */
        (void)log_init(progname);

        feedtype = whatami(av[0]);

        {
            extern int optind;
            extern int opterr;
            extern char *optarg;
            int ch;

            opterr = 0; /* stops getopt() from printing to stderr */
            usePil = 1;
            useNex = 1;

            while ((ch = getopt(ac, av, ":vxcni5Nl:b:p:P:T:q:r:f:s:")) != EOF)
                    switch (ch) {
                    case 'v':
                            if (!log_is_enabled_info)
                                (void)log_set_level(LOG_LEVEL_INFO);
                            break;
                    case 'x':
                            (void)log_set_level(LOG_LEVEL_DEBUG);
                            break;
                    case 'c':
                            chkflag = CHK_CHECK;
                            break;
                    case 'n':
                            chkflag = CHK_DONT;
                            break;
                    case 'i':
                            usePil = 0;
                            break;
                    case 'N':
                            useNex = 0;
                            break;
                    case '5':
                            skipLeadingCtlString = 0;
                            break;
                    case 'l': {
                            (void)log_set_destination(optarg);
                            break;
                    }
                    case 'b':
                            baud = optarg;
                            break;
                    case 'p':
                            parity = optarg;
                            break;
    #if NET
                    case 'P':
                            *((int *)&server_port) = atoi(optarg); /* cast away const */
                            if(server_port <= 0 || server_port > 65536)
                            {
                                    log_error("Invalid server port: \"%s\"", optarg);
                                    usage(progname);
                            }
                            break;
                    case 'T':
                            reset_secs = atoi(optarg);
                            if(reset_secs < 0)
                            {
                                    log_add("Invalid timeout: \"%s\"", optarg);
                                    usage(progname);
                            }
                            break;
    #endif /* NET */
                    case 's': {
                            unsigned long size;
                            int           nbytes;

                            if (sscanf(optarg, "%lu %n", &size, &nbytes) != 1 ||
                                    optarg[nbytes] != 0 || 1 > size) {
                                log_error("Invalid maximum data-product size: \"%s\"",
                                        optarg);
                                usage(progname);
                            }

                            maxProductSize = size;
                            break;
                    }
                    case 'q':
                            setQueuePath(optarg);
                            break;
                    case 'r':
                            rawfname = optarg;
                            break;
                    case 'f':
                            {
                                    feedtypet type;
                                    type = atofeedtypet(optarg);
                                    if(type != NONE)
                                    {
                                            feedtype = type;
                                            if(!parity && !baud)
                                                    setFeedDefaults(type);
                                    }
                            }
                            break;
                    case '?': {
                            log_add("Unknown option: \"%c\"", optopt);
                            usage(progname);
                            break;
                    }
                    case ':':
                    /*FALLTHROUGH*/
                    default:
                            log_add("Missing argument for option: \"%c\"", optopt);
                            usage(progname);
                            break;
                    }

            /* last arg, feedfname, is required */
            if(ac - optind != 1) {
                    log_add("Wrong number of operands: %d", ac - optind);
                    usage(progname);
            }
            (void)strncat(feedfname, av[optind], sizeof(feedfname)-6);
        }

        pqpath = getQueuePath();

        log_notice("Starting Up");
        log_debug(PACKAGE_VERSION);

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                log_syserr("atexit");
                return 1;
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        /*
         * open the product queue, unless we were invoked as "feedtest"
         */
        if(strcmp(progname, "feedtest") != 0)
        {
                if((ready = pq_open(pqpath, PQ_DEFAULT, &pq)))
                {
                        if (PQ_CORRUPT == ready) {
                            log_error("The product-queue \"%s\" is inconsistent\n",
                                    pqpath);
                        }
                        else {
                            log_error("pq_open: \"%s\" failed: %s",
                                    pqpath, strerror(ready));
                        }
                        return 1;
                }
        }

        /*
         * who am i, anyway
         */
        (void) strncpy(myname, ghostname(), sizeof(myname));
        myname[sizeof(myname)-1] = 0;

        /*
         * open the feed
         */
        if(!(*feedfname == '-' && feedfname[1] == 0) && logfd != 0)
                (void) close(0);

        if(open_feed(feedfname, &ifd, maxProductSize) != ENOERR)
                return 1;

        if(usePil == 1)
           {
           if ((feedtype & DDS)||(feedtype & PPS)||(feedtype & IDS)||
                (feedtype & HRS))
              {
              usePil = 1;
              log_info("Creating AFOS-like pil tags\0");
              }
           else
              {
              usePil = 0;
              }
           }

        if (feedtype & HDS)
        {
                if(chkflag == CHK_CHECK
                                || (isatty(ifd) && chkflag != CHK_DONT))
                        setTheScanner(scan_wmo_binary_crc);
                else
                        setTheScanner(scan_wmo_binary);
        }
        else if (feedtype == ( DDPLUS | IDS ) ) 
        { 
                /* this is the combined NOAAPORT fos-alike. We know these have the
                   4 byte start and end sequences. Using the binary scanner
                   ensures that we don't stop on an arbitray embedded CTRL-C */
                log_notice("Note: Using the wmo_binary scanner for SDI ingest\0");
                setTheScanner (scan_wmo_binary); 
        }
        else if (feedtype & (NMC2 | NMC3))
        {
                setTheScanner(scan_wmo_binary);
        }
        else if (feedtype == AFOS)
        {
                prod_stats = afos_stats;
                setTheScanner(scan_afos);
        }
        else if (feedtype == FAA604)
        {
                prod_stats = faa604_stats;
                if(chkflag == CHK_CHECK
                        || (isatty(ifd)
                                 && chkflag != CHK_DONT
                                 && parity != NULL
                                 && *parity != 'n')
                        )
                {
                        setTheScanner(scan_faa604_parity);
                }
                else
                {
                        setTheScanner(scan_faa604);
                }
        }
        else
        {
                if(chkflag == CHK_CHECK
                        || (isatty(ifd)
                                 && chkflag != CHK_DONT
                                 && parity != NULL
                                 && *parity != 'n')
                        )
                {
                        setTheScanner(scan_wmo_parity);
                }
                else
                {
                        setTheScanner(scan_wmo);
                }
        }

        /*
         * Allocate an MD5 context
         */
        md5ctxp = new_MD5_CTX();
        if(md5ctxp == NULL)
        {
                log_syserr("new_md5_CTX failed");
                return 1;
        }


        /*
         * Main Loop
         */
        idle = 0;
        while(exitIfDone(0))
        {
#if NET
if (INPUT_IS_SOCKET)
{
                if (port_error)
                {
                        /*
                         * lost connection => close
                         */
                        if (ifd >= 0)
                        {
                                if(feed_close)
                                        (*feed_close)(ifd);
                                ifd = -1;
                        }
                        port_error = 0;
                        sleep (2);      /* allow things to settle down */
                        continue;
                }
}
#endif
                if(stats_req)
                {
                        log_notice("Statistics Request");
                        if(pq != NULL)
                        {
                                off_t highwater = 0;
                                size_t maxregions = 0;
                                (void) pq_highwater(pq, &highwater,
                                         &maxregions);
                                log_notice("  Queue usage (bytes):%8ld",
                                                        (long)highwater);
                                log_notice("           (nregions):%8ld",
                                                        (long)maxregions);
                        }
                        log_notice("       Idle: %8lu seconds", idle);
#if NET
if (INPUT_IS_SOCKET)
{
                        log_notice("    Timeout: %8d", reset_secs);
}
#endif
                        log_notice("%21s: %s", "Status",
                                (ifd < 0) ?
                                "Not connected or input not open." :
                                "Connected.");
                        (*prod_stats)();
                        (*feed_stats)();
                        stats_req = 0;
                }
#if NET
if (INPUT_IS_SOCKET)
{
                if (ifd < 0)
                {
                        /* Attempt reconnect */
                        static int retries = 0;
                        if (retries > MAX_RETRIES)
                        {
                                log_error ("maximum retry attempts %d, aborting",
                                        MAX_RETRIES);
                                done = !0;
                                continue;
                        }
                        /* Try to reopen on tcp read errors */
                        log_notice("Trying to re-open connection on port %d",
                                server_port);
                        ++retries;
                        if(open_feed(feedfname, &ifd, maxProductSize) != ENOERR)
                        {
                                log_notice ("sleeping %d seconds before retry %d",
                                         retries * RETRY_DELAY, retries+1);
                                sleep (retries * RETRY_DELAY);
                                continue;
                        }
                        retries = 0;
                }
}
#endif /* NET */
                timeo.tv_sec = 3;
                timeo.tv_usec = 0;
                FD_ZERO(&readfds);
                FD_ZERO(&exceptfds);
                FD_SET(ifd, &readfds);
                FD_SET(ifd, &exceptfds);
                width =  ifd + 1;
                ready = select(width, &readfds, 0, &exceptfds, &timeo);
                if(ready < 0 )
                {
                        /* handle EINTR as a special case */
                        if(errno == EINTR)
                        {
                                errno = 0;
                                continue;
                        }
                        log_syserr("select");
                        return 1;
                }
                /* else */
#if 0
                if (FD_ISSET(ifd, &exceptfds))
                {
                        log_error("Exception on input fd %d, select returned %d",
                               ifd, ready);
                }
#endif
                if(ready > 0)
                {
                        /* do some work */
                        if(FD_ISSET(ifd, &readfds) || 
                           FD_ISSET(ifd, &exceptfds))
                        {
                                idle = 0;
                                if(feedTheXbuf(ifd) != ENOERR)
                                {
#if NET
if (INPUT_IS_SOCKET)
{
                                        port_error = !0;
                                        continue;
}                                       /* else */
#endif /* NET */
                                        done = !0;
                                }
                                FD_CLR(ifd, &readfds);
                                FD_CLR(ifd, &exceptfds);
                        }
                        else
                        {
                                log_error("select returned %d but ifd not set",
                                        ready);
                                idle += timeo.tv_sec;
                        }
                }
                else    /* ready == 0 */
                {
                        idle += timeo.tv_sec;
#if NET
if (INPUT_IS_SOCKET)
{
                        /* VOODOO
                         * This is necessary to stimulate
                         * 'Connection reset by peer'
                         * when the Portmaster goes down and comes
                         * back up.
                         */
                        static char zed[1] = {0};
                        if(write(ifd, zed, sizeof(zed)) < 0)
                        {
                                port_error = !0;
                                continue;
                        }

}
#endif
                }
#if NET
if (INPUT_IS_SOCKET)
{
                if ((reset_secs > 0) && (idle >= reset_secs))
                {
                        log_notice("Idle for %ld seconds, reconnecting",
                                idle);
                        /* force reconnect */
                        port_error = !0;
                        idle = 0;
                        continue;
                }
}
#endif /* NET */
                (void) scanTheXbuf();
        }

        return 0;
}
コード例 #9
0
ファイル: readnoaaport.c プロジェクト: semmerson/NOAAPORT
/**
 * Reads NOAAPORT data from a shared-memory FIFO or a file, creates LDM
 * data-products, and inserts the data-products into an LDM product-queue.
 *
 * Usage:
 *
 *     readnoaaport [-nvx] [-q <em>queue</em>] [-u <em>n</em>] [-m mcastAddr] [path]\n
 *
 * Where:
 * <dl>
 *      <dt>-l <em>log</em></dt>
 *      <dd>Log to \e log. if \e log is "-", then logging occurs to the 
 *      standard error stream; otherwise, \e log is the pathname of a file to
 *      which logging will occur. If not specified, then log messages will go
 *      to the system logging daemon. </dd>
 *
 *      <dt>-m <em>mcastAddr</em></dt>
 *      <dd>Use the shared-memory FIFO associated with the UDP
 *      multicast address \e mcastAddr.</dd>
 *
 *      <dt>-n</dt>
 *      <dd>Log messages of level NOTICE and higher priority.</dd>
 *
 *      <dt>-q <em>queue</em></dt>
 *      <dd>Use \e queue as the pathname of the LDM product-queue. The default
 *      is to use the default LDM pathname of the product-queue.</dd>
 *
 *      <dt>-u <em>n</em></dt>
 *      <dd>If logging is to the system logging daemon, then use facility 
 *      <b>local</b><em>n</em>. The default is to use the LDM facility.
 *
 *      <dt>-v</dt>
 *      <dd>Log messages of level INFO and higher priority. Each data-product
 *      will generate a log message.</dd>
 *
 *      <dt>-x</dt>
 *      <dd>Log messages of level DEBUG and higher priority.</dd>
 *
 *      <dt><em>path</em></dt>
 *      <dd>Pathname of the file from which to read data. The default is to use
 *      a shared-memory FIFO.</dd>
 * </dl>
 *
 * @retval 0 if successful.
 * @retval 1 if an error occurred. At least one error-message is logged.
 */
int main(
     const int          argc,
     char* const        argv[])
{
#ifdef HAVE_GET_QUEUE_PATH
    const char*         pqfname = getQueuePath();
#else
    const char*         pqfname = DEFAULT_QUEUE;
#endif
    int                 fd;
    char*               prodmmap;
    char*               memheap = NULL;
    size_t              heapsize;
    size_t              heapcount;
    unsigned char       b1;
    int                 cnt, dataoff, datalen, deflen;
    int                 nscan;
    long                IOFF;
    int                 NWSTG, GOES, PNGINIT = 0, PROD_COMPRESSED;
    long                last_sbn_seqno = (-1);
    char                PROD_NAME[1024];
    int                 status;
    prodstore           prod;
    sbn_struct*         sbn;
    pdh_struct*         pdh;
    psh_struct*         psh;
    ccb_struct*         ccb;
    pdb_struct*         pdb;
    datastore*          pfrag;
    extern int          optind;
    extern int          opterr;
    extern char*        optarg;
    int                 ch;
    int                 logmask = LOG_MASK(LOG_ERR);
    const char*         logfname = NULL;        /* use system logging daemon */
    unsigned            logOptions = LOG_CONS | LOG_PID;
    unsigned            logFacility = LOG_LDM;  /* use default LDM facility */
    const char* const   progName = ubasename(argv[0]);
    MD5_CTX*            md5ctxp = NULL;
    /*unsigned char *compr;
    long                comprLen = 10000 * sizeof (int);*/
    int                 pid_channel = -1;

    /*compr = (unsigned char *) calloc (comprLen, 1);*/

    /* Initialize the logger. */
    (void)setulogmask(logmask);
    (void)openulog(progName, logOptions, logFacility, logfname);

    opterr = 1;
    while ((ch = getopt(argc, argv, "nvxl:q:u:m:")) != EOF) {
        switch (ch) {
        case 'v':
            logmask |= LOG_MASK(LOG_INFO);
            (void)setulogmask(logmask);
            break;
        case 'x':
            logmask |= LOG_MASK(LOG_DEBUG);
            (void)setulogmask(logmask);
            break;
        case 'n':
            logmask |= LOG_MASK(LOG_NOTICE);
            (void)setulogmask(logmask);
            break;
        case 'l':
            if (optarg[0] == '-' && optarg[1] != 0) {
                nplError("logfile \"%s\" ??\n", optarg);
                usage(argv[0]);
            }
            /* else */
            logfname = optarg;
            (void)openulog(progName, logOptions, logFacility, logfname);
            break;
        case 'q':
            pqfname = optarg;
            break;
        case 'u': {
            int         i = atoi(optarg);

            if (0 <= i && 7 >= i) {
                static int  logFacilities[] = {LOG_LOCAL0, LOG_LOCAL1,
                    LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5, LOG_LOCAL6,
                    LOG_LOCAL7};

                logFacility = logFacilities[i];

                (void)openulog(progName, logOptions, logFacility, logfname);
            }

            break;
        }
        case 'm':
            sscanf(optarg, "%*d.%*d.%*d.%d", &pid_channel);	
            if ((pid_channel < 1) || (pid_channel > MAX_DVBS_PID)) {
                pid_channel = -1;
            }
            else {  
                shm = shmfifo_new();
                cnt = 0;

                while (((status = shmfifo_shm_from_key(shm, 
                          s_port[pid_channel - 1])) == -3) && (cnt < 30)) {
                    nplInfo("Trying to get shared-memory FIFO");
                    cnt++;
                    sleep(1);
                }

                if (0 != status) {
                    nplError("Couldn't get shared-memory FIFO. "
                            "Check associated dvbs_multicast(1) process.");
                    shmfifo_free(shm);
                    shm = NULL;
                }
                else {
                    nplInfo("Got shared-memory FIFO");
                }
            }
            break;
        case '?':
            usage(argv[0]);
            break;
        }
    }

    if (argc - optind < 0)
        usage(argv[0]);

    nplNotice("Starting Up %s", PACKAGE_VERSION);

    fd = ((argc - optind) == 0)
        ? fileno(stdin)
        : open(argv[optind], O_RDONLY, 0);

    if ((!shm) && (fd == -1)) {
        nplError("could not open input file");
        exit(0);
    }

    /*
     * Set up signal handlers
     */
    set_sigactions();

    /*
     * Register atexit routine
     */
    if (atexit(cleanup) != 0) {
        nplSerror("atexit");
        exit(-1);
    }

    sbn = (sbn_struct*)malloc(sizeof(sbn_struct));
    pdh = (pdh_struct*)malloc(sizeof(pdh_struct));
    psh = (psh_struct*)malloc(sizeof(psh_struct));
    ccb = (ccb_struct*)malloc(sizeof(ccb_struct));
    pdb = (pdb_struct*)malloc(sizeof(pdb_struct));
    prodmmap = (char*)malloc(10000);

    if (prodmmap == NULL) {
        nplError("could not allocate read buffer");
        exit(-1);
    }

    md5ctxp = new_MD5_CTX();
    prod.head = NULL;
    prod.tail = NULL;

    if (lpqGet(pqfname, &ldmProdQueue) != 0) {
        NPL_ADD1("Couldn't open LDM product-queue \"%s\"", pqfname);
        exit(1);
    }

    while (DONE == 0) {
        /* See if any stats need to be logged */
        if (logstats) {
            logstats = 0;
            dump_stats();
        }

        /* Look for first byte == 255  and a valid SBN checksum */
        if ((status = bufread(fd, prodmmap, 1)) != 0) {
            if (-3 == status)
                break;
            abort();
        }
        if ((b1 = (unsigned char)prodmmap[0]) != 255) {
            if (ulogIsVerbose())
                nplInfo("trying to resync %u", b1);
            if (ulogIsDebug())
                nplDebug("bufread loop");
            continue;
        }

        if (bufread(fd, prodmmap + 1, 15) != 0) {
            if (ulogIsDebug())
                nplDebug("couldn't read 16 bytes for sbn");
            continue;
        }

        while ((status = readsbn(prodmmap, sbn)) != 0) {
            if (ulogIsDebug())
                nplDebug("Not SBN start");

            IOFF = 1;

            while ((IOFF < 16) && ((b1 = (unsigned char) prodmmap[IOFF]) !=
                        255))
                IOFF++;

            if (IOFF > 15) {
                break;
            }
            else {
                for (ch = IOFF; ch < 16; ch++)
                    prodmmap[ch - IOFF] = prodmmap[ch];

                if (bufread(fd, prodmmap + 16 - IOFF, IOFF) != 0) {
                    if (ulogIsDebug())
                        nplDebug("Couldn't read bytes for SBN, resync");
                    break;
                }
            }
        }

        if (status != 0) {
            if (ulogIsDebug())
                nplDebug("SBN status continue");
            continue;
        }

        IOFF = 0;

        if (bufread(fd, prodmmap + 16, 16) != 0) {
            if (ulogIsDebug())
                nplDebug("error reading Product Definition Header");
            continue;
        }

        if (ulogIsDebug())
            nplDebug("***********************************************");
        if (last_sbn_seqno != -1) {
            if (sbn->seqno != last_sbn_seqno + 1) {
                nplNotice("Gap in SBN sequence number %ld to %ld [skipped %ld]",
                         last_sbn_seqno, sbn->seqno,
                         sbn->seqno - last_sbn_seqno - 1);
                if ( sbn->seqno > last_sbn_seqno )
                    nmissed = nmissed + 
                        (unsigned long)(sbn->seqno - last_sbn_seqno - 1);
            }
        }

        last_sbn_seqno = sbn->seqno;

        if (ulogIsVerbose())
            nplInfo("SBN seqnumber %ld", sbn->seqno);
        if (ulogIsVerbose())
            nplInfo("SBN datastream %d command %d", sbn->datastream,
                sbn->command);
        if (ulogIsDebug())
            nplDebug("SBN version %d length offset %d", sbn->version, sbn->len);
        if (((sbn->command != 3) && (sbn->command != 5)) || 
                (sbn->version != 1)) {
            nplError("Unknown sbn command/version %d PUNT", sbn->command);
            continue;
        }

        switch (sbn->datastream) {
        case 7:	      /* test */
        case 6:       /* was reserved...now nwstg2 */
        case 5:
            NWSTG = 1;
            GOES = 0;
            break;
        case 1:
        case 2:
        case 4:
            NWSTG = 0;
            GOES = 1;
            break;
        default:
            nplError("Unknown NOAAport channel %d PUNT", sbn->datastream);
            continue;
        }

        /* End of SBN version low 4 bits */

        if (readpdh(prodmmap + IOFF + sbn->len, pdh) == -1) {
            nplError("problem with pdh, PUNT");
            continue;
        }
        if (pdh->len > 16) {
            bufread(fd, prodmmap + sbn->len + 16, pdh->len - 16);
        }

        if (ulogIsDebug())
            nplDebug("Product definition header version %d pdhlen %d",
                pdh->version, pdh->len);

        if (pdh->version != 1) {
            nplError("Error: PDH transfer type %u, PUNT", pdh->transtype);
            continue;
        }
        else if (ulogIsDebug()) {
            nplDebug("PDH transfer type %u", pdh->transtype);
        }

        if ((pdh->transtype & 8) > 0)
            nplError("Product transfer flag error %u", pdh->transtype);
        if ((pdh->transtype & 32) > 0)
            nplError("Product transfer flag error %u", pdh->transtype);

        if ((pdh->transtype & 16) > 0) {
            PROD_COMPRESSED = 1;

            if (ulogIsDebug())
                nplDebug("Product transfer flag compressed %u", pdh->transtype);
        }
        else {
            PROD_COMPRESSED = 0;
        }

        if (ulogIsDebug())
            nplDebug("header length %ld [pshlen = %d]", pdh->len + pdh->pshlen,
                pdh->pshlen);
        if (ulogIsDebug())
            nplDebug("blocks per record %ld records per block %ld\n",
                pdh->blocks_per_record, pdh->records_per_block);
        if (ulogIsDebug())
            nplDebug("product seqnumber %ld block number %ld data block size "
                "%ld", pdh->seqno, pdh->dbno, pdh->dbsize);

        /* Stop here if no psh */
        if ((pdh->pshlen == 0) && (pdh->transtype == 0)) {
            IOFF = IOFF + sbn->len + pdh->len;
            continue;
        }

        if (pdh->pshlen != 0) {
            if (bufread(fd, prodmmap + sbn->len + pdh->len, pdh->pshlen) != 0) {
                nplError("problem reading psh");
                continue;
            }
            else {
                if (ulogIsDebug())
                    nplDebug("read psh %d", pdh->pshlen);
            }

            /* Timing block */
            if (sbn->command == 5) {
                if (ulogIsDebug())
                    nplDebug("Timing block recieved %ld %ld\0", psh->olen,
                        pdh->len);
                /*
                 * Don't step on our psh of a product struct of prod in
                 * progress.
                 */
                continue;
            }

            if (readpsh(prodmmap + IOFF + sbn->len + pdh->len, psh) == -1) {
                nplError("problem with readpsh");
                continue;
            }
            if (psh->olen != pdh->pshlen) {
                nplError("ERROR in calculation of psh len %ld %ld", psh->olen,
                    pdh->len);
                continue;
            }
            if (ulogIsDebug())
                nplDebug("len %ld", psh->olen);
            if (ulogIsDebug())
                nplDebug("product header flag %d, version %d", psh->hflag,
                    psh->version);
            if (ulogIsDebug())
                nplDebug("prodspecific data length %ld", psh->psdl);
            if (ulogIsDebug())
                nplDebug("bytes per record %ld", psh->bytes_per_record);
            if (ulogIsDebug())
                nplDebug("Fragments = %ld category %d ptype %d code %d",
                    psh->frags, psh->pcat, psh->ptype, psh->pcode);
            if (psh->frags < 0)
                nplError("check psh->frags %d", psh->frags);
            if (psh->origrunid != 0)
                nplError("original runid %d", psh->origrunid);
            if (ulogIsDebug())
                nplDebug("next header offset %ld", psh->nhoff);
            if (ulogIsDebug())
                nplDebug("original seq number %ld", psh->seqno);
            if (ulogIsDebug())
                nplDebug("receive time %ld", psh->rectime);
            if (ulogIsDebug())
                nplDebug("transmit time %ld", psh->transtime);
            if (ulogIsDebug())
                nplDebug("run ID %ld", psh->runid);
            if (ulogIsDebug())
                nplDebug("original run id %ld", psh->origrunid);
            if (prod.head != NULL) {
                nplError("OOPS, start of new product [%ld ] with unfinished "
                    "product %ld", pdh->seqno, prod.seqno);

                ds_free();

                prod.head = NULL;
                prod.tail = NULL;

                if (PNGINIT != 0) {
                    pngout_end();
                    PNGINIT = 0;
                }

                nplError("Product definition header version %d pdhlen %d",
                        pdh->version, pdh->len);
                nplError("PDH transfer type %u", pdh->transtype);

                if ((pdh->transtype & 8) > 0)
                    nplError("Product transfer flag error %u", pdh->transtype);
                if ((pdh->transtype & 32) > 0)
                    nplError("Product transfer flag error %u", pdh->transtype);

                nplError("header length %ld [pshlen = %d]",
                    pdh->len + pdh->pshlen, pdh->pshlen);
                nplError("blocks per record %ld records per block %ld",
                    pdh->blocks_per_record, pdh->records_per_block);
                nplError("product seqnumber %ld block number %ld data block "
                    "size %ld", pdh->seqno, pdh->dbno, pdh->dbsize);
                nplError("product header flag %d", psh->hflag);
                nplError("prodspecific data length %ld", psh->psdl);
                nplError("bytes per record %ld", psh->bytes_per_record);
                nplError("Fragments = %ld category %d", psh->frags, psh->pcat);

                if (psh->frags < 0)
                    nplError("check psh->frags %d", psh->frags);
                if (psh->origrunid != 0)
                    nplError("original runid %d", psh->origrunid);

                nplError("next header offset %ld", psh->nhoff);
                nplError("original seq number %ld", psh->seqno);
                nplError("receive time %ld", psh->rectime);
                nplError("transmit time %ld", psh->transtime);
                nplError("run ID %ld", psh->runid);
                nplError("original run id %ld", psh->origrunid);
            }

            prod.seqno = pdh->seqno;
            prod.nfrag = psh->frags;

            ds_init(prod.nfrag);

            /* NWSTG CCB = dataoff, WMO = dataoff + 24 */

            if (bufread(fd, prodmmap + sbn->len + pdh->len + pdh->pshlen,
                    pdh->dbsize) != 0) {
                nplError("problem reading datablock");
                continue;
            }
            if (sbn->datastream == 4) {
                if (psh->pcat != 3) {
                    GOES = 0;
                    NWSTG = 1;
                }
            }

            heapcount = 0;

            MD5Init(md5ctxp);

            if (GOES == 1) {
                if (readpdb(prodmmap + IOFF + sbn->len + pdh->len + pdh->pshlen,
                        psh, pdb, PROD_COMPRESSED, pdh->dbsize) == -1) {
                    nplError("Error reading pdb, punt");
                    continue;
                }

                memcpy(PROD_NAME, psh->pname, sizeof(PROD_NAME));

                if (ulogIsDebug())
                    nplDebug("Read GOES %d %d %d [%d] %d", sbn->len, pdh->len,
                        pdh->pshlen, sbn->len + pdh->len + pdh->pshlen,
                        pdb->len);

                /* Data starts at first block after pdb */
                ccb->len = 0;
                heapsize = prodalloc(psh->frags, 5152, &memheap);
            }
            if (NWSTG == 1) {
                memset(psh->pname, 0, sizeof(psh->pname));

                if (readccb(prodmmap + IOFF + sbn->len + pdh->len + pdh->pshlen,
                        ccb, psh, pdh->dbsize) == -1)
                    nplError("Error reading ccb, using default name");
                if (ulogIsDebug())
                    nplDebug("look at ccb start %d %d", ccb->b1, ccb->len);

                /*
                   cnt = 0;
                   memset(psh->pname,0,sizeof(psh->pname));
                   while ((b1 = (unsigned char)prodmmap[
                           IOFF + sbn->len + pdh->len + pdh->pshlen + ccb->len +
                           cnt]) >= 32) {
                       psh->pname[cnt] = prodmmap[
                           IOFF + sbn->len + pdh->len + pdh->pshlen + ccb->len +
                           cnt];
                       cnt++;
                   } 
                   if(cnt > 0)
                 */
                if (ulogIsVerbose())
                    nplInfo("%s", psh->pname);

                memcpy(PROD_NAME, psh->pname, sizeof(PROD_NAME));

                heapsize = prodalloc(psh->frags, 4000 + 15, &memheap);
                /*
                 * We will only compute md5 checksum on the data, 11 FOS
                 * characters at start
                 */
                /*
                 * sprintf(memheap,"\001\015\015\012%04d\015\015\012",
                 * ((int)pdh->seqno)%10000);
                 */
                sprintf(memheap, "\001\015\015\012%03d\040\015\015\012",
                    ((int) pdh->seqno) % 1000);

                heapcount += 11;

                if (psh->metaoff > 0)
                    psh->metaoff = psh->metaoff + 11;
            }
        }
        else {
            /* If a continuation record...don't let psh->pcat get missed */
            if ((sbn->datastream == 4) && (psh->pcat != 3)) {
                GOES = 0;
                NWSTG = 1;
            }

            ccb->len = 0;

            if (ulogIsDebug())
                nplDebug("continuation record");
            if ((pdh->transtype & 4) > 0) {
                psh->frags = 0;
            }
            if (bufread(fd, prodmmap + sbn->len + pdh->len + pdh->pshlen,
                    pdh->dbsize) != 0) {
                nplError("problem reading datablock (cont)");
                continue;
            }
            if (prod.head == NULL) {
                if (ulogIsVerbose())
                    nplInfo("found data block before header, "
                        "skipping sequence %d frag #%d", pdh->seqno, pdh->dbno);
                continue;
            }
        }

        /* Get the data */
        dataoff = IOFF + sbn->len + pdh->len + pdh->pshlen + ccb->len;
        datalen = pdh->dbsize - ccb->len;

        if (ulogIsDebug())
            nplDebug("look at datalen %d", datalen);

        pfrag = ds_alloc();
        pfrag->seqno = pdh->seqno;
        pfrag->fragnum = pdh->dbno;
        pfrag->recsiz = datalen;
        pfrag->offset = heapcount;
        pfrag->next = NULL;

        /*memcpy(memheap+heapcount,prodmmap+dataoff,datalen);
        MD5Update(md5ctxp, (unsigned char *)(memheap+heapcount), datalen);
        test_deflate(compr,comprLen,(unsigned char *)(memheap+heapcount),
        datalen);*/

        if (GOES == 1) {
            if (pfrag->fragnum > 0) {
                if ((pfrag->fragnum != prod.tail->fragnum + 1) || 
                        (pfrag->seqno != prod.seqno)) {
                    nplError("Missing GOES fragment in sequence, "
                        "last %d/%d this %d/%d\0", prod.tail->fragnum,
                        prod.seqno, pfrag->fragnum, pfrag->seqno);
                    ds_free();

                    prod.head = NULL;
                    prod.tail = NULL;

                    continue;
                }

                if ((PNGINIT != 1) && (!PROD_COMPRESSED)) {
                    nplError("failed pnginit %d %d %s", sbn->datastream,
                            psh->pcat, PROD_NAME);
                    continue;
                }
                if (pdh->records_per_block < 1) {
                    nplError("records_per_block %d blocks_per_record %d "
                        "nx %d ny %d", pdh->records_per_block,
                        pdh->blocks_per_record, pdb->nx, pdb->ny);
                    nplError("source %d sector %d channel %d", pdb->source,
                        pdb->sector, pdb->channel);
                    nplError("nrec %d recsize %d date %02d%02d%02d %02d%02d "
                        "%02d.%02d", pdb->nrec, pdb->recsize, pdb->year,
                        pdb->month, pdb->day, pdb->hour, pdb->minute,
                        pdb->second, pdb->sechunds);
                    nplError("pshname %s", psh->pname);
                }
                if (!PROD_COMPRESSED) {
                    for (nscan = 0; (nscan * pdb->nx) < pdh->dbsize; nscan++) {
                        if (ulogIsDebug())
                            nplDebug("png write nscan %d", nscan);
                        if (nscan >= pdh->records_per_block) {
                            nplError("nscan exceeding records per block %d [%d "
                                "%d %d]", pdh->records_per_block, nscan,
                                pdb->nx, pdh->dbsize);
                        }
                        else {
                          pngwrite(prodmmap + dataoff + (nscan * pdb->nx));
                        }
                    }
                }
                else {
                    memcpy(memheap + heapcount, prodmmap + dataoff, datalen);
                    MD5Update(md5ctxp, (unsigned char *) (memheap + heapcount),
                        datalen);
                    heapcount += datalen;
                }
            }
            else {
                if (!PROD_COMPRESSED) {
                    png_set_memheap(memheap, md5ctxp);
                    png_header(prodmmap + dataoff, datalen);
                    /*
                     * Add 1 to number of scanlines, image ends with 
                     * f0f0f0f0...
                     */
                    pngout_init(pdb->nx, pdb->ny + 1);

                    PNGINIT = 1;
                }
                else {
                    memcpy(memheap + heapcount, prodmmap + dataoff, datalen);
                    MD5Update(md5ctxp, (unsigned char*)(memheap + heapcount),
                        datalen);
                    heapcount += datalen;
                }
                nplNotice("records_per_block %d blocks_per_record %d nx %d ny %d",
                    pdh->records_per_block, pdh->blocks_per_record, pdb->nx,
                    pdb->ny);
                nplNotice("source %d sector %d channel %d", pdb->source,
                    pdb->sector, pdb->channel);
                nplNotice("nrec %d recsize %d date %02d%02d%02d %02d%02d "
                    "%02d.%02d", pdb->nrec, pdb->recsize, pdb->year, pdb->month,
                    pdb->day, pdb->hour, pdb->minute, pdb->second,
                    pdb->sechunds);
                nplNotice("pshname %s", psh->pname);
            }
            deflen = 0;
        }
        else {
            /*
             * test_deflate(memheap+heapcount,heapsize-heapcount,(unsigned char
             * *)(prodmmap+dataoff),datalen,&deflen);
             */
            /* If the product already has a FOS trailer, don't add
             * another....this will match what pqing(SDI) sees
             */
            if ((prod.nfrag != 0) && (prod.tail != NULL)) {
                if ((pfrag->fragnum != prod.tail->fragnum + 1) ||
                        (pfrag->seqno != prod.seqno)) {
                    nplError("Missing fragment in sequence, last %d/%d this "
                        "%d/%d\0", prod.tail->fragnum, prod.seqno,
                        pfrag->fragnum, pfrag->seqno);
                    ds_free();

                    prod.head = NULL;
                    prod.tail = NULL;

                    continue;
                }
            }
            if ((prod.nfrag == 0) || (prod.nfrag == (pfrag->fragnum + 1))) {
                char testme[4];

                while (datalen > 4) {
                    memcpy(testme, prodmmap + (dataoff + datalen - 4), 4);

                    if (memcmp(testme, FOS_TRAILER, 4) == 0) {
                        datalen -= 4;

                        if (ulogIsDebug())
                            nplDebug("removing FOS trailer from %s", PROD_NAME);
                    }
                    else {
                        break;
                    }
                }
            }
            if (heapcount + datalen > heapsize) {
                /*
                 * this above wasn't big enough heapsize =
                 * prodalloc(psh->frags,4000+15,&memheap);
                 */
                nplError("Error in heapsize %d product size %d [%d %d], Punt!\0",
                    heapsize, (heapcount + datalen), heapcount, datalen);
                continue;
            }

            memcpy(memheap + heapcount, prodmmap + dataoff, datalen);

            deflen = datalen;

            MD5Update(md5ctxp, (unsigned char *) (memheap + heapcount),
                deflen);
        }

        pfrag->recsiz = deflen;
        /*heapcount += datalen;*/
        heapcount += deflen;

        if (prod.head == NULL) {
            prod.head = pfrag;
            prod.tail = pfrag;
        }
        else {
            prod.tail->next = pfrag;
            prod.tail = pfrag;
        }

        if ((prod.nfrag == 0) || (prod.nfrag == (pfrag->fragnum + 1))) {
            if (GOES == 1) {
                if (PNGINIT == 1) {
                    pngout_end();
                    heapcount = png_get_prodlen();
                }
                else {
                    if (ulogIsDebug())
                        nplDebug("GOES product already compressed %d", heapcount);
                }
            }
            if (ulogIsVerbose())
              nplInfo("we should have a complete product %ld %ld/%ld %ld /heap "
                  "%ld", prod.seqno, pfrag->seqno, prod.nfrag, pfrag->fragnum,
                 (long) heapcount);
            if ((NWSTG == 1) && (heapcount > 4)) {
                cnt = 4;		/* number of bytes to add for TRAILER */

                /*
                 * Do a DDPLUS vs HDS check for NWSTG channel only
                 */
                if (sbn->datastream == 5) {
                    /* nwstg channel */
                    switch (psh->pcat) {
                    case 1:
                    case 7:
                      /* Do a quick check for non-ascii text products */
                      if (!prod_isascii(PROD_NAME, memheap, heapcount))
                        psh->pcat += 100;	/* call these HDS */
                      /* else {
                         ** call these DDPLUS **
                         if (memheap[heapcount-1] == FOS_TRAILER[3]) **
                             ETX check **
                             cnt = 0; ** no need to add extra ETX pqing doesn't
                             see it **
                         }
                       */
                      break;
                    }
                }

                if (cnt > 0) {
                    memcpy(memheap + heapcount, FOS_TRAILER + 4 - cnt, cnt);
                    MD5Update(md5ctxp, (unsigned char*)(memheap + heapcount),
                        cnt);
                    heapcount += cnt;
                }
            }

            process_prod(prod, PROD_NAME, memheap, heapcount,
                md5ctxp, ldmProdQueue, psh, sbn);
            ds_free();

            prod.head = NULL;
            prod.tail = NULL;
            PNGINIT = 0;
        }
        else {
            if (ulogIsDebug())
                nplDebug("processing record %ld [%ld %ld]", prod.seqno,
                    prod.nfrag, pfrag->fragnum);
            if ((pdh->transtype & 4) > 0) {
                nplError("Hmmm....should call completed product %ld [%ld %ld]",
                    prod.seqno, prod.nfrag, pfrag->fragnum);
            }
        }

        IOFF += (sbn->len + pdh->len + pdh->pshlen + pdh->dbsize);

        if (ulogIsDebug())
            nplDebug("look IOFF %ld datalen %ld (deflate %ld)", IOFF, datalen,
                deflen);
    }

    if (fd != -1)
       (void)close(fd);

    exit(0);
}
コード例 #10
0
ファイル: rtstats.c プロジェクト: khallock/LDM
int main(int ac, char *av[])
{
        const char* const       pqfname = getQueuePath();
        const char* const       progname = ubasename(av[0]);
        char *logfname = NULL; /* log to syslogd(8) */
        int logoptions = LOG_CONS | LOG_PID;
        int logmask = LOG_UPTO(LOG_NOTICE);
        prod_class_t clss;
        prod_spec spec;
        int status = 0;
        int interval = DEFAULT_INTERVAL;
        int toffset = TOFFSET_NONE;
        extern const char *remote;
        char* hostname = ghostname();

        /*
         * Setup default logging before anything else.
         */
        (void) openulog(progname, logoptions, LOG_LDM, logfname);
        (void) setulogmask(logmask);

        remote = "localhost";

        if(set_timestamp(&clss.from) != ENOERR) /* corrected by toffset below */
        {
                int errnum = errno;
                fprintf(stderr, "Couldn't set timestamp: %s", 
                        strerror(errnum));
                exit(1);
        }
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;
        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = ".*";
        
        /*
         * Sigh, in order to read back from existing stats files,
         * we call mktime(3). Since the stats are in UTC,
         * and mktime uses "local" time, the local time for
         * this program must be UTC.
         */
        if(setenv("TZ", "UTC0",1))
        {
                int errnum = errno;
                uerror("setenv: Couldn't set TZ: %s", strerror(errnum));
                exit(1);        
        }

        {
            int ch;

            opterr = 0; /* stops getopt() from printing to stderr */

            while ((ch = getopt(ac, av, ":vxl:p:f:q:o:i:H:h:P:")) != EOF) {
                switch (ch) {
                    case 'v':
                        logmask |= LOG_MASK(LOG_INFO);
                        (void) setulogmask(logmask);
                        break;
                    case 'x':
                        logmask |= LOG_MASK(LOG_DEBUG);
                        (void) setulogmask(logmask);
                        break;
                    case 'l':
                        logfname = optarg;
                        if (strcmp(logfname, "") == 0)
                            logfname = NULL;
                        logoptions = (logfname == NULL)
                                ? (LOG_CONS|LOG_PID)
                                : LOG_NOTIME;
                        openulog(progname, logoptions, LOG_LDM, logfname);
                        break;
                    case 'H':
                        hostname = optarg;
                        break;
                    case 'h':
                        remote = optarg;
                        break;
                    case 'p':
                        spec.pattern = optarg;
                        if (re_isPathological(spec.pattern)) {
                            unotice("Adjusting pathological regular-expression \"%s\"",
                                    spec.pattern);
                            re_vetSpec(spec.pattern);
                        }
                        break;
                    case 'f': {
                        int fterr = strfeedtypet(optarg, &spec.feedtype) ;
                        if (fterr != FEEDTYPE_OK) {
                            uerror("Bad feedtype \"%s\", %s", optarg,
                                    strfeederr(fterr)) ;
                            usage(progname);
                        }
                        break;
                    }
                    case 'q':
                        setQueuePath(optarg);
                        break;
                    case 'o':
                        toffset = atoi(optarg);
                        if(toffset == 0 && *optarg != '0') {
                            uerror("Invalid offset %s", optarg);
                            usage(progname);
                        }
                        break;
                    case 'P': {
                        char*       suffix = "";
                        long        port;

                        errno = 0;
                        port = strtol(optarg, &suffix, 0);

                        if (0 != errno || 0 != *suffix ||
                            0 >= port || 0xffff < port) {

                            uerror("Invalid port %s", optarg);
                            usage(progname);
                        }

                        remotePort = (unsigned)port;

                        break;
                    }
                    case 'i':
                        interval = atoi(optarg);
                        if (interval == 0 && *optarg != '0') {
                            uerror("Invalid interval %s", optarg);
                            usage(progname);
                        }
                        break;
                    case '?':
                        uerror("Invalid option \"%c\"", optopt);
                        usage(progname);
                        break;
                    case ':':
                        uerror("No argument for option \"%c\"", optopt);
                        usage(progname);
                        break;
                }
            } /* getopt() loop */

            if (optind != ac) {
                uerror("Invalid operand: \"%s\"", av[optind]);
                usage(progname);
            }
        } /* command-line decoding block */

        if (regcomp(&spec.rgx, spec.pattern, REG_EXTENDED|REG_NOSUB)) {
            uerror("Bad regular expression \"%s\"\n", spec.pattern);
            usage(progname);
        }

        unotice("Starting Up (%d)", getpgrp());

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(1);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();


        /*
         * Open the product queue
         */
        status = pq_open(pqfname, PQ_READONLY, &pq);
        if(status)
        {
                if (PQ_CORRUPT == status) {
                    uerror("The product-queue \"%s\" is inconsistent\n",
                            pqfname);
                }
                else {
                    uerror("pq_open failed: %s: %s\n",
                            pqfname, strerror(status));
                }
                exit(1);
        }

        if(toffset == TOFFSET_NONE)
        {
                /*
                 * Be permissive with the time filter,
                 * jump now to the end of the queue.
                 */
                clss.from = TS_ZERO;
                (void) pq_last(pq, &clss, NULL);
        }
        else
        {
                /*
                 * Filter and queue position set by
                 * toffset.
                 */
                clss.from.tv_sec -= toffset;
                pq_cset(pq, &clss.from);
        }

        while(exitIfDone(0))
        {
                if(stats_req)
                {
                        dump_statsbins();
                        stats_req = 0;
                }

                status = pq_sequence(pq, TV_GT, &clss, addtostats, 0);

                switch(status) {
                case 0: /* no error */
                        continue; /* N.B., other cases sleep */
                case PQUEUE_END:
                        udebug("End of Queue");
                        break;
                case EAGAIN:
                case EACCES:
                        udebug("Hit a lock");
                        break;
                default:
                        uerror("pq_sequence failed: %s (errno = %d)",
                                strerror(status), status);
                        exit(1);
                        break;
                }

                syncbinstats(hostname);

                if(interval == 0)
                {
                        done = 1;
                        break;
                }

                pq_suspend(interval);
        }

        return 0;
}
コード例 #11
0
ファイル: pqinsert.c プロジェクト: KeithLatteri/awips2
int main(
        int ac,
        char *av[]
)
{
        char *progname = av[0];
        char *logfname;
        int useProductID = FALSE;
        int signatureFromId = FALSE;
        char *productID = NULL;
        int multipleFiles = FALSE;
        char identifier[KEYSIZE];
        int status;
        int seq_start = 0;
        enum ExitCode {
            exit_success = 0,
            exit_system = 1,    /* operating-system failure */
            exit_pq_open = 2,   /* couldn't open product-queue */
            exit_infile = 3,    /* couldn't process input file */
            exit_md5 = 6        /* couldn't initialize MD5 processing */
        } exitCode = exit_success;

        logfname = "-";

        /*
         * Check the environment for some options.
         * May be overridden by command line switches below.
         */
        {
                const char *ldmpqfname = getenv("LDMPQFNAME");
                if(ldmpqfname != NULL)
                        pqfname = ldmpqfname;
        }

        {
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int logmask = (LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING) |
            LOG_MASK(LOG_NOTICE));

        opterr = 1;

        while ((ch = getopt(ac, av, "ivxl:q:f:s:p:")) != EOF)
                switch (ch) {
                case 'i':
                        signatureFromId = 1;
                        break;
                case 'v':
                        logmask |= LOG_MASK(LOG_INFO);
                        break;
                case 'x':
                        logmask |= LOG_MASK(LOG_DEBUG);
                        break;
                case 'l':
                        logfname = optarg;
                        break;
                case 'q':
                        pqfname = optarg;
                        break;
                case 's':
                        seq_start = atoi(optarg);
                        break;
                case 'f':
                        feedtype = atofeedtypet(optarg);
                        if(feedtype == NONE)
                        {
                            fprintf(stderr, "Unknown feedtype \"%s\"\n", optarg);
                                usage(progname);        
                        }
                        break;
                case 'p':
                        useProductID = TRUE;
                        productID = optarg;
                        break;
                case '?':
                        usage(progname);
                        break;
                }

        ac -= optind; av += optind ;

        if(ac < 1) usage(progname);
        (void) setulogmask(logmask);
        }

        /*
         * Set up error logging
         */
        (void) openulog(ubasename(progname), LOG_NOTIME, LOG_LDM, logfname);

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(exit_system);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        /*
         * who am i, anyway
         */
        (void) strcpy(myname, ghostname());

        /*
         * open the product queue
         */
        if(status = pq_open(pqfname, PQ_DEFAULT, &pq))
        {
                if (PQ_CORRUPT == status) {
                    uerror("The product-queue \"%s\" is inconsistent\n",
                            pqfname);
                }
                else {
                    uerror("pq_open: \"%s\" failed: %s",
                            pqfname, status > 0 ? strerror(status) :
                                            "Internal error");
                }
                exit(exit_pq_open);
        }


        {
        char *filename;
        int fd;
        struct stat statb;
        product prod;
        MD5_CTX *md5ctxp = NULL;

        /*
         * Allocate an MD5 context
         */
        md5ctxp = new_MD5_CTX();
        if(md5ctxp == NULL)
        {
                serror("new_md5_CTX failed");
                exit(exit_md5);
        }


        /* These members are constant over the loop. */
        prod.info.origin = myname;
        prod.info.feedtype = feedtype;

        if (ac > 1) {
          multipleFiles = TRUE;
        }

        for(prod.info.seqno = seq_start ; ac > 0 ;
                         av++, ac--, prod.info.seqno++)
        {
                filename = *av;

                fd = open(filename, O_RDONLY, 0);
                if(fd == -1)
                {
                        serror("open: %s", filename);
                        exitCode = exit_infile;
                        continue;
                }

                if( fstat(fd, &statb) == -1) 
                {
                        serror("fstat: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                /* Determine what to use for product identifier */
                if (useProductID) 
                  {
                    if (multipleFiles) 
                      {
                        sprintf(identifier,"%s.%d", productID, prod.info.seqno);
                        prod.info.ident = identifier;
                      }
                    else
                      prod.info.ident = productID;
                   }
                else
                    prod.info.ident = filename;
                
                prod.info.sz = statb.st_size;
                prod.data = NULL;

#ifndef NO_MMAP
                prod.data = mmap(0, prod.info.sz,
                        PROT_READ, MAP_PRIVATE, fd, 0);
                if(prod.data == NULL)
                {
                        serror("mmap: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                status = 
                    signatureFromId
                        ? mm_md5(md5ctxp, prod.info.ident,
                            strlen(prod.info.ident), prod.info.signature)
                        : mm_md5(md5ctxp, prod.data, prod.info.sz,
                            prod.info.signature);

                (void)exitIfDone(1);

                if (status != 0) {
                    serror("mm_md5: %s", filename);
                    (void) munmap(prod.data, prod.info.sz);
                    (void) close(fd);
                    exitCode = exit_infile;
                    continue;
                }

                /* These members, and seqno, vary over the loop. */
                status = set_timestamp(&prod.info.arrival);
                if(status != ENOERR) {
                        serror("set_timestamp: %s, filename");
                        exitCode = exit_infile;
                        continue;
                }

                /*
                 * Do the deed
                 */
                status = pq_insert(pq, &prod);

                switch (status) {
                case ENOERR:
                    /* no error */
                    if(ulogIsVerbose())
                        uinfo("%s", s_prod_info(NULL, 0, &prod.info,
                            ulogIsDebug())) ;
                    break;
                case PQUEUE_DUP:
                    uerror("Product already in queue: %s",
                        s_prod_info(NULL, 0, &prod.info, 1));
                    break;
                case ENOMEM:
                    uerror("queue full?");
                    break;  
                case EINTR:
#if defined(EDEADLOCK) && EDEADLOCK != EDEADLK
                case EDEADLOCK:
                    /*FALLTHROUGH*/
#endif
                case EDEADLK:
                    /* TODO: retry ? */
                    /*FALLTHROUGH*/
                default:
                    uerror("pq_insert: %s", status > 0
                        ? strerror(status) : "Internal error");
                    break;
                }

                (void) munmap(prod.data, prod.info.sz);
#else /*!NO_MMAP*/
                status = 
                    signatureFromId
                        ? mm_md5(md5ctxp, prod.info.ident,
                            strlen(prod.info.ident), prod.info.signature)
                        : fd_md5(md5ctxp, fd, statb.st_size,
                            prod.info.signature);

                (void)exitIfDone(1);

                if (status != 0) {
                        serror("fd_md5: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                if(lseek(fd, 0, SEEK_SET) == (off_t)-1)
                {
                        serror("rewind: %s", filename);
                        (void) close(fd);
                        exitCode = exit_infile;
                        continue;
                }

                index = PQE_NONE;
                status = pqe_new(pq, &prod.info, &prod.data, &index);

                if(status != ENOERR) {
                    serror("pqe_new: %s", filename);
                    exitCode = exit_infile;
                }
                else {
                    ssize_t     nread = read(fd, prod.data, prod.info.sz);

                    (void)exitIfDone(1);

                    if (nread != prod.info.sz) {
                        serror("read %s %u", filename, prod.info.sz);
                        status = EIO;
                    }
                    else {
                        status = pqe_insert(pq, index);
                        index = PQE_NONE;

                        switch (status) {
                        case ENOERR:
                            /* no error */
                            if(ulogIsVerbose())
                                uinfo("%s", s_prod_info(NULL, 0, &prod.info,
                                    ulogIsDebug())) ;
                            break;
                        case PQUEUE_DUP:
                            uerror("Product already in queue: %s",
                                s_prod_info(NULL, 0, &prod.info, 1));
                            break;
                        case ENOMEM:
                            uerror("queue full?");
                            break;  
                        case EINTR:
#if defined(EDEADLOCK) && EDEADLOCK != EDEADLK
                        case EDEADLOCK:
                            /*FALLTHROUGH*/
#endif
                        case EDEADLK:
                            /* TODO: retry ? */
                            /*FALLTHROUGH*/
                        default:
                            uerror("pq_insert: %s", status > 0
                                ? strerror(status) : "Internal error");
                        }
                    }                   /* data read into "index" region */

                    if (status != ENOERR) {
                        (void)pqe_discard(pq, index);
                        index = PQE_NONE;
                    }
                }                       /* "index" region allocated */

#endif /*!NO_MMAP*/
                (void) close(fd);
        }                               /* input-file loop */

        free_MD5_CTX(md5ctxp);  
        }                               /* code block */

        exit(exitCode);
}
コード例 #12
0
ファイル: gribinsert.c プロジェクト: Unidata/LDM
int
main (int ac, char *av[])
{
  char *progname = av[0];
  int status;
  int seq_start = 0;
  stat_info *sinfo, *shead = NULL, *slast = NULL;
  int statusoff=0;

  /*
   * Set up error logging
   */
    if (log_init(progname)) {
        log_syserr("Couldn't initialize logging module");
        exit(1);
    }

  const char* pqfname = getQueuePath();

  /*
   * Check the environment for some options.
   * May be overridden by command line switches below.
   */
  {
    const char *ldmpqfname = getenv ("LDMPQFNAME");
    if (ldmpqfname != NULL)
      pqfname = ldmpqfname;
  }

  {
    extern int optind;
    extern int opterr;
    extern char *optarg;
    int ch;

    opterr = 1;

    while ((ch = getopt (ac, av, "vxl:q:f:s:S")) != EOF)
      switch (ch)
	{
	case 'v':
          if (!log_is_enabled_info)
            (void)log_set_level(LOG_LEVEL_INFO);
	  break;
	case 'x':
          (void)log_set_level(LOG_LEVEL_DEBUG);
	  break;
	case 'l':
          if (log_set_destination(optarg)) {
              log_syserr("Couldn't set logging destination to \"%s\"",
                      optarg);
              exit(1);
          }
	  break;
	case 'q':
	  pqfname = optarg;
	  break;
	case 's':
	  seq_start = atoi (optarg);
	  break;
	case 'f':
	  feedtype = atofeedtypet (optarg);
	  if (feedtype == NONE)
	    {
	      fprintf (stderr, "Unknown feedtype \"%s\"\n", optarg);
	      usage (progname);
	    }
	  break;
	case 'S':
	     statusoff=1;
	     break;
	case '?':
	  usage (progname);
	  break;
	}

    setQueuePath(pqfname);

    ac -= optind;
    av += optind;

    if (ac < 1)
      usage (progname);
  }

  /*
   * register exit handler
   */
  if (atexit (cleanup) != 0)
    {
      log_syserr ("atexit");
      exit (1);
    }

  /*
   * set up signal handlers
   */
  set_sigactions ();

  /*
   * who am i, anyway
   */
  (void) strcpy (myname, ghostname ());

  /*
   * open the product queue
   */
  if ((status = pq_open (pqfname, PQ_DEFAULT, &pq)))
    {
      if (status > 0) {
          log_add_syserr("\"%s\" failed", pqfname);
          log_flush_error();
      }
      else {
          log_error_q("\"%s\" failed: %s", pqfname, "Internal error");
      }
      exit (2);
    }


  {
    char *filename;
    int fd;
    struct stat statb;
    product prod;
    unsigned char *prodmmap;
    MD5_CTX *md5ctxp = NULL;
    int gversion;

    /*
     * Allocate an MD5 context
     */
    md5ctxp = new_MD5_CTX ();
    if (md5ctxp == NULL)
      {
	log_syserr ("new_md5_CTX failed");
	exit (6);
      }

    /* These members are constant over the loop. */
    prod.info.origin = myname;
    prod.info.feedtype = feedtype;

    prod.info.seqno = seq_start;

    /*
     * Open the file to be inserted and process
     */
    while (ac > 0)
      {
        long insert_sum = 0;
	long sinfo_cnt = 0;
        long stat_size = 0;

	filename = *av;
	av++;
	ac--;

	log_notice_q ("open and memorymap %s\0", filename);

	fd = open (filename, O_RDONLY, 0);
	if (fd == -1)
	  {
	    log_syserr ("open: %s", filename);
	    continue;
	  }

	if (fstat (fd, &statb) == -1)
	  {
	    log_syserr ("fstat: %s", filename);
	    (void) close (fd);
	    continue;
	  }

	if ((prodmmap = (unsigned char *) mmap (0, statb.st_size,
				       PROT_READ, MAP_PRIVATE, fd,
				       0)) == MAP_FAILED)
	  {
	    log_syserr ("allocation failed");
	  }
	else
	  {
	    int GRIBDONE = 0;
	    off_t griboff = 0;
	    size_t griblen = 0;
	    log_notice_q ("%ld bytes memory mapped\0", (long) statb.st_size);

	    while (!GRIBDONE)
	      {
		log_debug("griboff %d\0", (int) griboff);
		/* get offset of next grib product */
		status =
		  get_grib_info (prodmmap, statb.st_size, &griboff, &griblen,
				 &gversion);

		switch (status)
		  {
		  case 0:
		    prod.data = prodmmap + griboff;
		    prod.info.sz = griblen;

		    /*
		     * revised MD5 calculation...using filename
		     * to allow duplicate products in different files.
		     */
		    MD5Init (md5ctxp);
  		    MD5Update (md5ctxp, (void *)filename, strlen(filename));
  		    /*MD5Update (md5ctxp, (void *)prod.data, prod.info.sz);*/
		    if ( prod.info.sz > 10000 )
  		       MD5Update (md5ctxp, (void *)prod.data, 10000);
		    else
  		       MD5Update (md5ctxp, (void *)prod.data, prod.info.sz);
  		    MD5Final (prod.info.signature, md5ctxp);

		    /*if (mm_md5 (md5ctxp, prod.data, prod.info.sz,
				prod.info.signature) != 0)
		      {
			log_error_q ("could not compute MD5\0");
		      }
		    else
		      { */
			prod.info.ident = (char *) malloc (KEYSIZE + 1);
			get_gribname (gversion, prod.data, prod.info.sz,
				      filename, prod.info.seqno,
				      prod.info.ident);
			/*
			 * Do the deed
			 */
			status = set_timestamp (&prod.info.arrival);
			if (status != ENOERR)
			  {
			    log_add_syserr("could not set timestamp");
                            log_flush_error();
			  }
			/*
			 * Insert the product
			 */
			status = pq_insert (pq, &prod);
			log_info_q ("%d %s\0", status, prod.info.ident);
                
			if ( status == ENOERR )
			   insert_sum += prod.info.sz;

			if (! statusoff )
			  {
			  /*
			   * Log this status
			   */
			    sinfo_cnt++;
			    sinfo = (stat_info *)malloc(sizeof(stat_info));
                   	    sinfo->insertstatus = status;
			    sinfo->prodname = (char *)malloc(strlen(prod.info.ident)+1);
                   	    strcpy(sinfo->prodname, prod.info.ident);
                   	    sinfo->seqno = prod.info.seqno;
                   	    sinfo->prodsz = prod.info.sz;
                   	    sinfo->next = NULL;
                   	    stat_size += strlen(sinfo->prodname);
                   	    if(shead == NULL)
			      {
                      	        shead = sinfo;
                      	        slast = sinfo;
                   	      }
                   	    else 
			      {
                      	        slast->next = sinfo;
                      	        slast = sinfo;
                   	      }
			  }
		      /*}*/
		    griboff += griblen;
		    prod.info.seqno++;
		    break;
		  case -1:
		    GRIBDONE = 1;
		    break;
		  case -2:
		    log_error_q ("truncated grib file at: %d", prod.info.seqno);
		    GRIBDONE = 1;
		    break;
		  case -7:
		    log_error_q ("End sequence 7777 not found where expected: %d",
			    prod.info.seqno);
		    griboff += griblen;
		    log_error_q("resume looking at %d\0",griboff);
		    break;
		  default:
		    log_error_q ("unknown error %d\0", status);
		    griboff += griblen;
		    if (griboff >= statb.st_size)
		      GRIBDONE = 1;
		    break;
		  }

		if (griboff >= statb.st_size)
		  GRIBDONE = 1;
	      }


	    log_notice_q ("munmap\0");
	    (void) munmap ((void *)prodmmap, statb.st_size);

	    if ( stat_size != 0 )
	    /*
	     * Add a status message to product queue
	     */
	      {
		char *statusmess;
		log_notice_q("stats_size %ld %ld\0",stat_size,sinfo_cnt);

		statusmess = calloc((30 * sinfo_cnt) + stat_size +
                        strlen(filename) + 128, sizeof(char));
                if(statusmess == NULL) 
		  {
              	    log_syserr("could not malloc status message %ld\0",
              	            stat_size);
           	  }
           	else
		  {
		    char tmpprod[512];
                    sinfo = shead; slast = NULL;

                    status = set_timestamp(&prod.info.arrival);
                    /* ctime ends with \n\0" */
                    sprintf(statusmess,"%s complete (%ld bytes) at %sInserted %ld of %ld\n",
                       filename,(long)statb.st_size, ctime(&prod.info.arrival.tv_sec),
                       insert_sum,(long)statb.st_size);

                    while(sinfo != NULL) 
		      {
                        sprintf(tmpprod,"%3d %5d %8d %s\n",sinfo->insertstatus,
                            sinfo->seqno,sinfo->prodsz,sinfo->prodname);
                        strcat(statusmess,tmpprod);

                        slast = sinfo;
                 	sinfo = sinfo->next;

                        free(slast->prodname);
                    	free(slast);

                      }

		    shead = NULL;

                    sprintf(tmpprod,".status.%s %06d",filename, prod.info.seqno);
                    prod.info.ident = tmpprod;
                    prod.data = statusmess;
                    prod.info.sz = strlen(statusmess);
                    status = mm_md5(md5ctxp, prod.data, prod.info.sz, prod.info.signature);
                    status = set_timestamp(&prod.info.arrival);
                    status = pq_insert(pq, &prod);
                    if(log_is_enabled_info)
                        log_info_q("%s", s_prod_info(NULL, 0, &prod.info,
                                log_is_enabled_debug)) ;
                    free(statusmess);
		    prod.info.seqno++;
		  }
	      }
	  }

	(void) close (fd);
      }
  }

exit(0);
}
コード例 #13
0
ファイル: ldmsend.c プロジェクト: KeithLatteri/awips2
int main(int ac, char *av[])
{
        char myname[HOSTNAMESIZE];
        char *progname = av[0];
        char *logfname;
        unsigned version;
        prod_class_t clss;
        prod_spec spec;
        int seq_start = 0;
        int status;
        ErrorObj* error;
        unsigned remotePort = LDM_PORT;
        
        logfname = "-";
        remote = "localhost";

        (void)set_timestamp(&clss.from);
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;
        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = ".*";

        {
        extern int optind;
        extern char *optarg;
        int ch;
        int logmask = (LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING) |
            LOG_MASK(LOG_NOTICE));

        while ((ch = getopt(ac, av, "vxl:h:f:P:s:")) != EOF)
                switch (ch) {
                case 'v':
                        logmask |= LOG_MASK(LOG_INFO);
                        break;
                case 'x':
                        logmask |= LOG_MASK(LOG_DEBUG);
                        break;
                case 'l':
                        logfname = optarg;
                        break;
                case 'h':
                        remote = optarg;
                        break;
                case 'f':
                        spec.feedtype = atofeedtypet(optarg);
                        if(spec.feedtype == NONE)
                        {
                            fprintf(stderr, "Unknown feedtype \"%s\"\n", optarg);
                                usage(progname);        
                        }
                        break;
                case 'P': {
                    char*       suffix = "";
                    long        port;

                    errno = 0;
                    port = strtol(optarg, &suffix, 0);

                    if (0 != errno || 0 != *suffix ||
                        0 >= port || 0xffff < port) {

                        (void)fprintf(stderr, "%s: invalid port %s\n",
                             av[0], optarg);
                        usage(av[0]);   
                    }

                    remotePort = (unsigned)port;

                    break;
                }
                case 's':
                        seq_start = atoi(optarg);
                        break;
                case '?':
                        usage(progname);
                        break;
                }

        ac -= optind; av += optind;

        if(ac < 1) usage(progname);
        (void) setulogmask(logmask);
        }

        /*
         * Set up error logging
         */
        (void) openulog(ubasename(progname), LOG_NOTIME, LOG_LDM, logfname);

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(1);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();

        (void) strcpy(myname, ghostname());

        /*
         * Contact the server.
         */
        error = ldm_clnttcp_create_vers(remote, remotePort, SIX, &clnt,
                NULL, NULL);

        (void)exitIfDone(1);

        if (!error) {
            version = SIX;
            hiya = my_hiya_6;
            send_product = send_product_6;
            nullproc = nullproc_6;
        }
        else if (LDM_CLNT_BAD_VERSION == err_code(error)) {
            err_free(error);

            error = ldm_clnttcp_create_vers(remote, remotePort, FIVE, &clnt,
                    NULL, NULL);

            (void)exitIfDone(1);

            if (!error) {
                version = FIVE;
                hiya = my_hiya_5;
                send_product = send_product_5;
                nullproc = NULL;
            }
        }

        if (error) {
            err_log(error, ERR_FAILURE);
            err_free(error);
            status = 1;
        }
        else {
            udebug("version %u", version);

            status = ldmsend(clnt, &clss, myname, seq_start, ac, av);
        }

        return status != 0; 
}
コード例 #14
0
ファイル: xnbd.c プロジェクト: dellastreet/NBD-SparseImager
int master_server(int port, void *data)
{
	int lsock[MAXLISTENSOCK];
	struct addrinfo *ai_head;

	struct xnbd_info *xnbd = (struct xnbd_info *) data;

	ai_head = net_getaddrinfo(NULL, port, PF_UNSPEC);
	if (!ai_head)
		return 0;

	nlistened = net_listen_all_addrinfo(ai_head, lsock);
	if (nlistened <= 0)
		err("no socket to listen to");

	freeaddrinfo(ai_head);


	for (nfds_t i = 0; i < nlistened; i++) {
		eventfds[i].fd     = lsock[i];
		eventfds[i].events = POLLRDNORM;
	}

	for (nfds_t i = nlistened; i < MAXLISTENSOCK; i++)
		eventfds[i].fd     = -1;


	set_sigactions();

	sigset_t sigs_blocked;
	sigset_t orig_sigmask;
	/*
	 * The master process does not want to get SIGCHLD anytime; when SIGCHLD received, some
	 * system calls may fail with errno == EINTR. Only this ppoll() can be intrrupted.
	 */
	sigemptyset(&sigs_blocked);
	/* do now allow SIG_CHLD except ppoll() */
	sigaddset(&sigs_blocked, SIGCHLD);
	sigaddset(&sigs_blocked, SIGINT);
	sigaddset(&sigs_blocked, SIGTERM);
	sigaddset(&sigs_blocked, SIGHUP);
	pthread_sigmask(SIG_BLOCK, &sigs_blocked, &orig_sigmask);

	GList *socklist = NULL;
	int restarting = 0;

	for (;;) {
		int nready;

		/*
		 * N.B. If compiled with fake ppoll() support, the master
		 * process may deadlock when a child process exited.
		 *
		 * For Debian's 2.6.18 kernels, ppoll() is equivalent to calling
		 * sigprocmask(), poll(), and then sigprocmask(); it is not an
		 * atomic system call.
		 *
		 * In this code, while the master process is running outside
		 * this ppoll(), a delivered signal goes to pending state
		 * until the process accepts the signal.  The handler of the
		 * signal is called just after the process unblocks the signal.
		 *
		 * In this ppoll(), the first sigprocmask() unblocks the
		 * signal. Before the poll(), the signal handler is called.
		 * poll() does not detect the signal, and does not return until
		 * the next event comes.
		 *
		 * This means that ppoll() does not return -1 with errno ==
		 * EINTR, for the signal that deliverred while the process was
		 * running outside ppoll().
		 *
		 * For Debian's 2.6.26 kernels, it's ok.
		 */
		/*
		 * In glibc-2.7, sysdeps/unix/sysv/linux/kernel-features.h says
		 *   pselect/ppoll were introduced just after 2.6.16-rc1.  Due
		 *   to the way the kernel versions are advertised we can only
		 *   rely on 2.6.17 to have the code.  On x86_64 and SH this
		 *   appeared first in 2.6.19-rc1, on ia64 in 2.6.22-rc1 and on
		 *   alpha just after 2.6.22-rc1.
		 **/
		if (need_exit) {
			dbg("need exit");
			break;
		}

		if (got_sigchld) {
			dbg("got sigchld");
			got_sigchld = 0;

			/* SIGCHLD */
			for (;;) {
				int status;
				pid_t pid = waitpid(-1, &status, WNOHANG);

				/* no more exiting child process */
				if (pid < 0)
					break;

				/* pid == 0: no more exiting child process. there still
				 * remains one or more running process(es). */
				if (pid == 0)
					break;

				struct xnbd_session *ses = find_session_with_pid(xnbd, pid);
				if (!ses)
					err("unknown session pid %d", pid);

				xnbd->sessions = g_list_remove(xnbd->sessions, ses);
				free_session(xnbd, ses);
				info("session (pid %d) exited", pid);

				if (WIFEXITED(status))
					info("   with exit status=%d", WEXITSTATUS(status));

				if (WIFSIGNALED(status))
					info("   killed by signal=%d(%s)", WTERMSIG(status), sys_siglist[WTERMSIG(status)]);
			}
		}

		if (restarting && g_list_length(xnbd->sessions) == 0) {
			/* All sessions are stopped. Now start new sessions with existing sockets. */

			info("All sessions are stopped. Now restart.");
			/*
			 * invoke_new_session() manipulates xnbd->sessions,
			 * adding an entry to it. The fixed list is used here
			 * instead of xnbd->sessions.
			 **/
			for (GList *list = g_list_first(socklist); list != NULL; list = g_list_next(list)) {
				int csockfd = (int) ((long) list->data);  /* See below */
				invoke_new_session(xnbd, csockfd);
			}

			
			/* must be reinitialized with NULL */
			g_list_free(socklist);
			socklist = NULL;

			info("restarting has done");

			restarting = 0;
		}

		if (got_sighup) {
			info("got SIGHUP, restart %d process(es)", g_list_length(xnbd->sessions));
			got_sighup = 0;

			/* notify all sessions of termination */
			for (GList *list = g_list_first(xnbd->sessions); list != NULL; list = g_list_next(list)) {
				struct xnbd_session *s = (struct xnbd_session *) list->data;

				dbg("%p\n", s);
				/*
				 * If a new connection is accepted during
				 * restarting, send SIGHUP to the master server
				 * again.
				 **/
				if (s->notifying)
					continue;

				s->notifying = 1;

				/* preserve connected sockets */
				int csockfd = dup(s->clientfd);
				if (csockfd < 0)
					err("dup %d, %m", csockfd);

				/* it's ok because sizeof(void *) >= sizeof(int); 32bit =, 64bit > */
				socklist = g_list_append(socklist, (void *) ((long) csockfd));

				info("notify %d of termination", s->pid);
				ssize_t ret = write(s->event_notifier_fd, "0", 1);
				if (ret < 0)
					warn("notifiy failed");
			}

			restarting = 1;
		}

		/* SIGCHLD must be blocked here, so that only this ppoll() detects that */
		//raise(SIGCHLD);

		info("start polling");
		nready = ppoll(eventfds, nlistened, NULL, &orig_sigmask); 
		//printf("poll ready %d\n", nready);
		if (nready == -1) {
			/* signal catched */
			if (errno == EINTR) {
				info("polling signal catched");
				continue;
			} else
				err("poll, %s", strerror(errno));
		}


		for (nfds_t i = 0; i < nlistened; i++) {
			int sockfd = eventfds[i].fd;

			if (sockfd < 0)
				continue;

			if (eventfds[i].revents & (POLLHUP | POLLNVAL)) 
				err("unknown events, %x", eventfds[i].revents);

			if (eventfds[i].revents & (POLLRDNORM | POLLERR)) {
				/* if POLLERR, the next read() returns -1 */
				/* POLLERR never occurs because we wait new connections */

				int csockfd = net_accept(sockfd);
				if (csockfd < 0) {
					warn("accept() failed");
					continue;
				}

				int ret;
				if (xnbd->readonly)
					ret = nbd_negotiate_with_client_readonly(csockfd, xnbd->disksize);
				else
					ret = nbd_negotiate_with_client(csockfd, xnbd->disksize);
				if (ret < 0) {
					warn("negotiation with the client failed");
					continue;
				}

				info("csockfd %d", csockfd);
				invoke_new_session(xnbd, csockfd);
			}

			/* short cut */
			nready -= 1;
			if (nready == 0)
				break;
		}
	}



	/* notify child processes */
	shutdown_all_sessions(xnbd);

	return 0;
}
コード例 #15
0
ファイル: ldmd.c プロジェクト: dgaer/LDM
int main(
        int ac,
        char* av[])
{
    const char* pqfname = getQueuePath();
    int status;
    int doSomething = 1;
    in_addr_t ldmIpAddr = (in_addr_t) htonl(INADDR_ANY );
    unsigned ldmPort = LDM_PORT;

    ensureDumpable();

    /*
     * deal with the command line, set options
     */
    {
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int logmask = LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING)
                | LOG_MASK(LOG_NOTICE);

        opterr = 1;

        while ((ch = getopt(ac, av, "I:vxl:nq:o:P:M:m:t:")) != EOF) {
            switch (ch) {
            case 'I': {
                in_addr_t ipAddr = inet_addr(optarg);

                if ((in_addr_t) -1 == ipAddr) {
                    (void) fprintf(stderr, "Interface specification \"%s\" "
                            "isn't an IP address\n", optarg);
                    exit(1);
                }

                ldmIpAddr = ipAddr;

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                break;
            case 'l':
                logfname = optarg;
                break;
            case 'q':
                pqfname = optarg;
                setQueuePath(optarg);
                break;
            case 'o':
                toffset = atoi(optarg);
                if (toffset == 0 && *optarg != '0') {
                    (void) fprintf(stderr, "%s: invalid offset %s\n", av[0],
                            optarg);
                    usage(av[0]);
                }
                break;
            case 'P': {
                unsigned port;
                int      nbytes;
                if (sscanf(optarg, "%5u %n", &port, &nbytes) != 1 ||
                        0 != optarg[nbytes] || port > 0xffff) {
                    (void)fprintf(stderr, "%s: invalid port number: %s\n",
                            av[0], optarg);
                    usage(av[0]);
                }
                ldmPort = port;
                break;
            }
            case 'M': {
                int max = atoi(optarg);
                if (max < 0) {
                    (void) fprintf(stderr,
                            "%s: invalid maximum number of clients %s\n", av[0],
                            optarg);
                    usage(av[0]);
                }
                maxClients = max;
                break;
            }
            case 'm':
                max_latency = atoi(optarg);
                if (max_latency <= 0) {
                    (void) fprintf(stderr, "%s: invalid max_latency %s\n",
                            av[0], optarg);
                    usage(av[0]);
                }
                break;
            case 'n':
                doSomething = 0;
                break;
            case 't':
                rpctimeo = (unsigned) atoi(optarg);
                if (rpctimeo == 0 || rpctimeo > 32767) {
                    (void) fprintf(stderr, "%s: invalid timeout %s", av[0],
                            optarg);
                    usage(av[0]);
                }
                break;
            case '?':
                usage(av[0]);
                break;
            } /* "switch" statement */
        } /* argument loop */

        if (ac - optind == 1)
            setLdmdConfigPath(av[optind]);
        (void) setulogmask(logmask);

        if (toffset != TOFFSET_NONE && toffset > max_latency) {
            (void) fprintf(stderr,
                    "%s: invalid toffset (%d) > max_latency (%d)\n", av[0],
                    toffset, max_latency);
            usage(av[0]);
        }
    } /* command-line argument decoding */

    if (logfname != NULL && *logfname == '-') {
        /*
         * Logging to standard error stream. Assume interactive.
         *
         * Make this process a process group leader so that all child processes
         * (e.g., upstream LDM, downstream LDM, pqact(1)s) will be signaled by
         * `cleanup()`.
         */
        (void)setpgid(0, 0); // can't fail
    }
#ifndef DONTFORK
    else {
        /*
         * Logging to system logging daemon or file. Make this process a daemon.
         */
        pid_t pid;
        pid = ldmfork();
        if (pid == -1) {
            log_add("Couldn't fork LDM daemon");
            log_log(LOG_ERR);
            exit(2);
        }

        if (pid > 0) {
            /* parent */
            (void) printf("%ld\n", (long) pid);
            exit(0);
        }

        /* detach the child from parents process group ?? */
        (void) setsid(); // also makes this process a process group leader
    }
#endif

    /*
     * Initialize logger.
     * (Close fd 2 to remap stderr to the logfile, when
     * appropriate. I know, this is anal.)
     */
    if (logfname == NULL )
        (void) fclose(stderr);
    else if (!(logfname[0] == '-' && logfname[1] == 0))
        (void) close(2);
    (void) openulog(ubasename(av[0]), (LOG_CONS | LOG_PID), LOG_LDM, logfname);
    unotice("Starting Up (version: %s; built: %s %s)", PACKAGE_VERSION,
            __DATE__, __TIME__);

    /*
     * register exit handler
     */
    if (atexit(cleanup) != 0) {
        serror("atexit");
        unotice("Exiting");
        exit(1);
    }

    /*
     * set up signal handlers
     */
    set_sigactions();

    /*
     * Close the standard input and standard output streams because they won't
     * be used (more anality :-)
     */
    (void) fclose(stdout);
    (void) fclose(stdin);

    /*
     * Vet the configuration file.
     */
    udebug("main(): Vetting configuration-file");
    if (read_conf(getLdmdConfigPath(), 0, ldmIpAddr, ldmPort) != 0) {
        log_log(LOG_ERR);
        exit(1);
    }

    if (doSomething) {
        int sock = -1;

        if (lcf_isServerNeeded()) {
            /*
             * Create a service portal. This should be done before anything is
             * created because this is the function that relinquishes superuser
             * privileges.
             */
            udebug("main(): Creating service portal");
            if (create_ldm_tcp_svc(&sock, ldmIpAddr, ldmPort) != ENOERR) {
                /* error reports are emitted from create_ldm_tcp_svc() */
                exit(1);
            }
            udebug("tcp sock: %d", sock);
        }

        /*
         * Verify that the product-queue can be open for writing.
         */
        udebug("main(): Opening product-queue");
        if ((status = pq_open(pqfname, PQ_DEFAULT, &pq))) {
            if (PQ_CORRUPT == status) {
                uerror("The product-queue \"%s\" is inconsistent", pqfname);
            }
            else {
                uerror("pq_open failed: %s: %s", pqfname, strerror(status));
            }
            exit(1);
        }
        (void) pq_close(pq);
        pq = NULL;

        /*
         * Create the sharable database of upstream LDM metadata.
         */
        udebug("main(): Creating shared upstream LDM database");
        if ((status = uldb_delete(NULL))) {
            if (ULDB_EXIST == status) {
                log_clear();
            }
            else {
                LOG_ADD0(
                        "Couldn't delete existing shared upstream LDM database");
                log_log(LOG_ERR);
                exit(1);
            }
        }
        if (uldb_create(NULL, maxClients * 1024)) {
            LOG_ADD0("Couldn't create shared upstream LDM database");
            log_log(LOG_ERR);
            exit(1);
        }

        /*
         * Initialize the multicast sender map.
         */
#if WANT_MULTICAST
        if (msm_init()) {
            LOG_ADD0("Couldn't initialize multicast LDM sender map");
            log_log(LOG_ERR);
            exit(1);
        }
#endif

        /*
         * Re-read (and execute) the configuration file (downstream LDM-s are
         * started).
         */
        lcf_free(); // Start with a clean slate to prevent duplicates
        udebug("main(): Reading configuration-file");
        if (read_conf(getLdmdConfigPath(), 1, ldmIpAddr, ldmPort) != 0) {
            log_log(LOG_ERR);
            exit(1);
        }

        if (lcf_isServerNeeded()) {
            /*
             * Serve
             */
            udebug("main(): Serving socket");
            sock_svc(sock);
        }
        else {
            /*
             * Wait until all child processes have terminated.
             */
            while (reap(-1, 0) > 0)
                /* empty */;
        }
    }   // configuration-file will be executed

    return (0);
}
コード例 #16
0
/*
 * Returns:
 *      0               Success
 *      SYSTEM_ERROR    O/S failure. "log_add()" called.
 *      LP_TIMEDOUT     The RPC call timed-out. "log_add()" called.
 *      LP_RPC_ERROR    RPC error. "log_add()" called.
 *      LP_LDM_ERROR    LDM error. "log_add()" called.
 */
int
main(
    int         ac,
    char*       av[])
{
    char            myname[_POSIX_HOST_NAME_MAX];
    char*           progname = av[0];
    prod_class_t    clss;
    prod_spec       spec;
    int             seq_start = 0;
    int             status;
    ErrorObj*       error;
    unsigned        remotePort = LDM_PORT;

    /*
     * Set up error logging
     */
    (void)log_init(progname);

    remote = "localhost";

    (void)set_timestamp(&clss.from);
    clss.to = TS_ENDT;
    clss.psa.psa_len = 1;
    clss.psa.psa_val = &spec;
    spec.feedtype = DEFAULT_FEEDTYPE;
    spec.pattern = ".*";

    {
        extern int optind;
        extern char *optarg;
        int ch;

        while ((ch = getopt(ac, av, "vxl:h:f:P:s:")) != EOF)
            switch (ch) {
            case 'v':
                if (!log_is_enabled_info)
                    (void)log_set_level(LOG_LEVEL_INFO);
                break;
            case 'x':
                (void)log_set_level(LOG_LEVEL_DEBUG);
                break;
            case 'l':
                (void)log_set_destination(optarg);
                break;
            case 'h':
                remote = optarg;
                break;
            case 'f':
                spec.feedtype = atofeedtypet(optarg);
                if(spec.feedtype == NONE)
                {
                    fprintf(stderr, "Unknown feedtype \"%s\"\n",
                            optarg);
                        usage(progname);        
                }
                break;
            case 'P': {
                char*       suffix = "";
                long        port;

                errno = 0;
                port = strtol(optarg, &suffix, 0);

                if (0 != errno || 0 != *suffix ||
                    0 >= port || 0xffff < port) {

                    (void)fprintf(stderr, "%s: invalid port %s\n",
                         av[0], optarg);
                    usage(av[0]);   
                }

                remotePort = (unsigned)port;

                break;
            }
            case 's':
                seq_start = atoi(optarg);
                break;
            case '?':
                usage(progname);
                break;
            }

        ac -= optind; av += optind;

        if(ac < 1) usage(progname);
    }

    /*
     * Register the exit handler
     */
    if(atexit(cleanup) != 0)
    {
        log_syserr_q("atexit");
        exit(SYSTEM_ERROR);
    }

    /*
     * Set up signal handlers
     */
    set_sigactions();

    (void) strncpy(myname, ghostname(), sizeof(myname));
    myname[sizeof(myname)-1] = 0;

    (void)exitIfDone(INTERRUPTED);

    /*
     * Connect to the LDM.
     */
    status = lp_new(remote, &ldmProxy);

    if (0 != status) {
        log_flush_error();
        status = (LP_SYSTEM == status)
            ? SYSTEM_ERROR
            : CONNECTION_ABORTED;
    }
    else {
        log_debug("version %u", lp_version(ldmProxy));

        status = ldmsend(ldmProxy, &clss, myname, seq_start, ac, av);

        if (0 != status)
            log_flush_error();

        lp_free(ldmProxy);
        ldmProxy = NULL;
    }                                       /* "ldmProxy" allocated */

    return status; 
}
コード例 #17
0
ファイル: notifyme.c プロジェクト: KeithLatteri/awips2
int main(int ac, char *av[])
{
        char *logfname = 0;
        unsigned timeo = DEFAULT_TIMEO; 
        unsigned interval = DEFAULT_TIMEO; 
        unsigned TotalTimeo = DEFAULT_TOTALTIMEO;
        prod_spec spec;
        int status;
        prod_class_t *clssp;
        unsigned remotePort = LDM_PORT;

        if(set_timestamp(&clss.from) != 0)
        {
                fprintf(stderr, "Couldn't set timestamp\n");
                exit(1);
        }
        clss.to = TS_ENDT;
        clss.psa.psa_len = 1;
        clss.psa.psa_val = &spec;
        spec.feedtype = DEFAULT_FEEDTYPE;
        spec.pattern = DEFAULT_PATTERN;

        { /* Begin getopt block */
        extern int optind;
        extern int opterr;
        extern char *optarg;
        int ch;
        int logmask = (LOG_MASK(LOG_ERR) | LOG_MASK(LOG_WARNING) |
            LOG_MASK(LOG_NOTICE));
        int fterr;

        opterr = 1;

        while ((ch = getopt(ac, av, "vxl:f:o:t:h:P:p:T:")) != EOF)
                switch (ch) {
                case 'v':
                        logmask |= LOG_MASK(LOG_INFO);
                        break;
                case 'x':
                        logmask |= LOG_MASK(LOG_DEBUG);
                        break;
                case 'l':
                        logfname = optarg;
                        break;
                case 'h':
                        remote = optarg;
                        break;
                case 'P': {
                    char*       suffix = "";
                    long        port;

                    errno = 0;
                    port = strtol(optarg, &suffix, 0);

                    if (0 != errno || 0 != *suffix ||
                        0 >= port || 0xffff < port) {

                        (void)fprintf(stderr, "%s: invalid port %s\n",
                             av[0], optarg);
                        usage(av[0]);   
                    }

                    remotePort = (unsigned)port;

                    break;
                }
                case 'p':
                        spec.pattern = optarg;
                        /* compiled below */
                        break;
                case 'f':
                        fterr = strfeedtypet(optarg, &spec.feedtype);
                        if(fterr != FEEDTYPE_OK)
                        {
                                fprintf(stderr, "Bad feedtype \"%s\", %s\n",
                                        optarg, strfeederr(fterr));
                                usage(av[0]);   
                        }
                        break;
                case 'o':
                        clss.from.tv_sec -= atoi(optarg);
                        break;
                case 'T':
                        TotalTimeo = atoi(optarg);
                        if(TotalTimeo == 0)
                        {
                                fprintf(stderr, "%s: invalid TotalTimeo %s", av[0], optarg);
                                usage(av[0]);   
                        }
                        break;
                case 't':
                        timeo = (unsigned)atoi(optarg);
                        if(timeo == 0 || timeo > 32767)
                        {
                                fprintf(stderr, "%s: invalid timeout %s", av[0], optarg);
                                usage(av[0]);   
                        }
                        break;
                case '?':
                        usage(av[0]);
                        break;
                }

        if(ac - optind > 0)
                usage(av[0]);

        if (re_isPathological(spec.pattern))
        {
                fprintf(stderr, "Adjusting pathological regular-expression: "
                    "\"%s\"\n", spec.pattern);
                re_vetSpec(spec.pattern);
        }
        status = regcomp(&spec.rgx,
                spec.pattern,
                REG_EXTENDED|REG_NOSUB);
        if(status != 0)
        {
                fprintf(stderr, "Bad regular expression \"%s\"\n",
                        spec.pattern);
                usage(av[0]);
        }

        (void) setulogmask(logmask);

        if(TotalTimeo < timeo)
        {
                fprintf(stderr, "TotalTimeo %u < timeo %u\n",
                         TotalTimeo, timeo);
                usage(av[0]);
        }

        } /* End getopt block */

        /*
         * initialize logger
         */
        (void) openulog(ubasename(av[0]),
                (LOG_CONS|LOG_PID), LOG_LDM, logfname);
        unotice("Starting Up: %s: %s",
                        remote,
                        s_prod_class(NULL, 0, &clss));

        /*
         * register exit handler
         */
        if(atexit(cleanup) != 0)
        {
                serror("atexit");
                exit(1);
        }

        /*
         * set up signal handlers
         */
        set_sigactions();


        /*
         * Try forever.
         */
        while (exitIfDone(0))
        {
                clssp = &clss;
                status = forn5(NOTIFYME, remote, &clssp,
                                timeo, TotalTimeo, notifymeprog_5);

                (void)exitIfDone(0);

                switch(status) {
                        /* problems with remote, retry */       
                case ECONNABORTED:
                case ECONNRESET:
                case ETIMEDOUT:
                case ECONNREFUSED:
                        sleep(interval);
                        break;
                case 0:
                        /* assert(done); */
                        break;
                default:
                        /* some wierd error */
                        done = 1;
                        exit(1);
                }
        }

        exit(0);
        /*NOTREACHED*/
}
コード例 #18
0
ファイル: noaaportIngester.c プロジェクト: rmlawton/LDM
/**
 * Reads a NOAAPORT data stream, creates LDM data-products from the stream, and
 * inserts the data-products into an LDM product-queue.  The NOAAPORT data
 * stream can take the form of multicast UDP packets from (for example) a
 * Novra S300 DVB-S2 receiver or the standard input stream.
 *
 * Usage:
 *     noaaportIngester [-l <em>log</em>] [-n|-v|-x] [-q <em>queue</em>] [-u <em>n</em>] [-m <em>mcastAddr</em>] [-I <em>iface</em>] [-b <em>npages</em>]\n
 *
 * Where:
 * <dl>
 *      <dt>-b <em>npages</em></dt>
 *      <dd>Allocate \e npages pages of memory for the internal buffer.</dd>
 *
 *      <dt>-I <em>iface</em></dt>
 *      <dd>Listen for multicast packets on interface \e iface.</dd>
 *
 *      <dt>-l <em>log</em></dt>
 *      <dd>Log to file \e log. The default is to use the system logging daemon
 *      if the current process is a daemon; otherwise, the standard error
 *      stream is used.</dd>
 *
 *      <dt>-m <em>mcastAddr</em></dt>
 *      <dd>Use the multicast address \e mcastAddr. The default is to
 *      read from the standard input stream.</dd>
 *
 *      <dt>-n</dt>
 *      <dd>Log messages of level NOTE and higher priority. Each data-product
 *      will generate a log message.</dd>
 *
 *      <dt>-q <em>queue</em></dt>
 *      <dd>Use \e queue as the pathname of the LDM product-queue. The default
 *      is to use the default LDM pathname of the product-queue.</dd>
 *
 *      <dt>-u <em>n</em></dt>
 *      <dd>If logging is to the system logging daemon, then use facility 
 *      <b>local</b><em>n</em>. The default is to use the LDM facility.</dd>
 *
 *      <dt>-v</dt>
 *      <dd>Log messages of level INFO and higher priority.</dd>
 *
 *      <dt>-x</dt>
 *      <dd>Log messages of level DEBUG and higher priority.</dd>
 * </dl>
 *
 * If neither -n, -v, nor -x is specified, then logging will be restricted to
 * levels ERROR and WARN only.
 *
 * @retval 0 if successful.
 * @retval 1 if an error occurred. At least one error-message will be logged.
 */
int main(
    const int           argc,           /**< [in] Number of arguments */
    char* const         argv[])         /**< [in] Arguments */
{
    int                 status = 0;     /* default success */
    extern int          optind;
    extern int          opterr;
    int                 ch;
    const char* const   progName = ubasename(argv[0]);
    const char*         interface = NULL;
    int                 logmask = LOG_UPTO(LOG_WARNING);
    const unsigned      logOptions = LOG_CONS | LOG_PID;
    const char*         mcastSpec = NULL;
    const char*         prodQueuePath = NULL;
    size_t              npages = DEFAULT_NPAGES;
    Fifo*               fifo;
    int                 ttyFd = open("/dev/tty", O_RDONLY);
    int                 processPriority = 0;
    int                 idx;
    const char*         logPath = (-1 == ttyFd)
        ? NULL                          /* log to system logging daemon */
        : "-";                          /* log to standard error stream */

    (void)close(ttyFd);
    (void)setulogmask(logmask);

    status = initLogging(progName, logOptions, logFacility, logPath);
    opterr = 0;                         /* no error messages from getopt(3) */

    while (0 == status && (ch = getopt(argc, argv, "b:I:l:m:np:q:r:s:t:u:vx")) != -1)
    {
        switch (ch) {
            extern char*    optarg;
            extern int      optopt;

            case 'b': {
                unsigned long   n;

                if (sscanf(optarg, "%lu", &n) != 1) {
                    LOG_SERROR1("Couldn't decode FIFO size in pages: \"%s\"",
                            optarg);
                    status = 1;
                }
                else {
                    npages = n;
                }
                break;
            }
            case 'I':
                interface = optarg;
                break;
            case 'l':
                logPath = optarg;
                status = initLogging(progName, logOptions, logFacility,
                        logPath);
                break;
            case 'm':
                mcastSpec = optarg;
                break;
            case 'n':
                logmask |= LOG_MASK(LOG_NOTICE);
                (void)setulogmask(logmask);
                break;
            case 'p': {
                char* cp;

                errno = 0;
                processPriority = (int)strtol(optarg, &cp, 0);

                if (0 != errno) {
                    LOG_SERROR1("Couldn't decode priority \"%s\"", optarg);
                    log_log(LOG_ERR);
                }
                else {
                    if (processPriority < -20)
                        processPriority = -20;
                    else if (processPriority > 20)
                        processPriority = 20;
                }

                break;
            }
            case 'q':
                prodQueuePath = optarg;
                break;
            case 'r':
#ifdef RETRANS_SUPPORT
                retrans_xmit_enable = atoi(optarg);
                if(retrans_xmit_enable == 1)
                  retrans_xmit_enable = OPTION_ENABLE;
                else
                  retrans_xmit_enable = OPTION_DISABLE;
#endif
                break;
           case 's': {
#ifdef RETRANS_SUPPORT
			strcpy(sbn_channel_name, optarg);
                        if(!strcmp(optarg,NAME_SBN_TYP_GOES)) {
                                sbn_type = SBN_TYP_GOES;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NOAAPORT_OPT)) {
                                sbn_type = SBN_TYP_NOAAPORT_OPT;
                                break;
                        }
                        if(!strcmp(optarg,"NWSTG")) {
                                sbn_type = SBN_TYP_NMC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC)) {
                                sbn_type = SBN_TYP_NMC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC2)) {
                                sbn_type = SBN_TYP_NMC2;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC3)) {
                                sbn_type = SBN_TYP_NMC3;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NWWS)) {
                                sbn_type = SBN_TYP_NWWS;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_ADD)) {
                                sbn_type = SBN_TYP_ADD;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_ENC)) {
                                sbn_type = SBN_TYP_ENC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_EXP)) {
                                sbn_type = SBN_TYP_EXP;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_GRW)) {
                                sbn_type = SBN_TYP_GRW;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_GRE)) {
                                sbn_type = SBN_TYP_GRE;
                                break;
                        }
                        printf("Operator input: UNKNOWN type must be\n");
                        printf(" %s, %s, %s, %s, %s, %s, %s, %s, %s, %s  or %s \n",
                                NAME_SBN_TYP_NMC,
                                NAME_SBN_TYP_GOES,
                                NAME_SBN_TYP_NOAAPORT_OPT,
                                NAME_SBN_TYP_NMC2,
                                NAME_SBN_TYP_NMC3,
                                NAME_SBN_TYP_NWWS,
                                NAME_SBN_TYP_ADD,
                                NAME_SBN_TYP_ENC,
                                NAME_SBN_TYP_EXP,
                                NAME_SBN_TYP_GRW,
                                NAME_SBN_TYP_GRE);
#endif
                break;
              }
            case 't':
#ifdef RETRANS_SUPPORT
                strcpy(transfer_type, optarg);
                if(!strcmp(transfer_type,"MHS") || !strcmp(transfer_type,"mhs")){
                     /** Using MHS for communication with NCF  **/
                }else{
                     uerror("No other mechanism other than MHS is currently supported\n");
                     status  = 1;
                 }
#endif
                break;
            case 'u': {
                int         i = atoi(optarg);

                if (0 > i || 7 < i) {
                    LOG_START1("Invalid logging facility number: %d", i);
                    status = 1;
                }
                else {
                    static int  logFacilities[] = {LOG_LOCAL0, LOG_LOCAL1,
                        LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5,
                        LOG_LOCAL6, LOG_LOCAL7};

                    logFacility = logFacilities[i];

                    status = initLogging(progName, logOptions, logFacility,
                            logPath);
                }

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                (void)setulogmask(logmask);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                (void)setulogmask(logmask);
                break;
            default:
                optopt = ch;
                /*FALLTHROUGH*/
                /* no break */
            case '?': {
                uerror("Unknown option: \"%c\"", optopt);
                status = 1;
                break;
            }
        }                               /* option character switch */
    }                                   /* getopt() loop */

    if (0 == status) {
        if (optind < argc) {
            uerror("Extraneous command-line argument: \"%s\"",
                    argv[optind]);
            status = 1;
        }
    }

    if (0 != status) {
        uerror("Error decoding command-line");
        usage(progName);
    }
    else {
        unotice("Starting Up %s", PACKAGE_VERSION);
        unotice("%s", COPYRIGHT_NOTICE);

        if ((status = fifoNew(npages, &fifo)) != 0) {
            LOG_ADD0("Couldn't create FIFO");
            log_log(LOG_ERR);
        }
        else {
            LdmProductQueue*    prodQueue;

            if ((status = lpqGet(prodQueuePath, &prodQueue)) != 0) {
                LOG_ADD0("Couldn't open LDM product-queue");
                log_log(LOG_ERR);
            }
            else {
                if (NULL == mcastSpec) {
                    if (0 == (status = spawnProductMaker(NULL, fifo, prodQueue,
                                    &productMaker, &productMakerThread))) {
                        status = spawnFileReader(NULL, NULL, fifo, &reader,
                                &readerThread);
                    }
                }                               /* reading file */
                else {
                    pthread_attr_t  attr;

                    if (0 != (status = pthread_attr_init(&attr))) {
                        LOG_ERRNUM0(status,
                                "Couldn't initialize thread attribute");
                    }
                    else {
#ifndef _POSIX_THREAD_PRIORITY_SCHEDULING
                        uwarn("Can't adjust thread priorities due to lack of "
                                "necessary support from environment");
#else
                        /*
                         * In order to not miss any data, the reader thread
                         * should preempt the product-maker thread as soon as
                         * data is available and run as long as data is
                         * available.
                         */
                        const int           SCHED_POLICY = SCHED_FIFO;
                        struct sched_param  param;

                        param.sched_priority =
                            sched_get_priority_max(SCHED_POLICY) - 1;

                        (void)pthread_attr_setinheritsched(&attr,
                                PTHREAD_EXPLICIT_SCHED);
                        (void)pthread_attr_setschedpolicy(&attr, SCHED_POLICY);
                        (void)pthread_attr_setschedparam(&attr, &param);
                        (void)pthread_attr_setscope(&attr,
                                PTHREAD_SCOPE_SYSTEM);
#endif
#ifdef RETRANS_SUPPORT
                        if (retrans_xmit_enable == OPTION_ENABLE){
                         /* Copy mcastAddress needed to obtain the cpio entries */
                         strcpy(mcastAddr, mcastSpec);
                        }
#endif
                        if (0 == (status = spawnProductMaker(&attr, fifo,
                                        prodQueue, &productMaker,
                                        &productMakerThread))) {
#ifdef _POSIX_THREAD_PRIORITY_SCHEDULING
                            param.sched_priority++;
                            (void)pthread_attr_setschedparam(&attr, &param);
#endif
                            status = spawnMulticastReader(&attr, mcastSpec,
                                    interface, fifo, &reader, &readerThread);

                        }                       /* product-maker spawned */
                    }                           /* "attr" initialized */
                }                               /* reading multicast packets */

                if (0 != status) {
                    log_log(LOG_ERR);
                    status = 1;
                }
                else {
                    pthread_t   statThread;

                    (void)gettimeofday(&startTime, NULL);
                    reportTime = startTime;

                    (void)pthread_create(&statThread, NULL,
                            reportStatsWhenSignaled, NULL);

                    set_sigactions();

                    (void)pthread_join(readerThread, NULL);

                    status = readerStatus(reader);

                    (void)pthread_cancel(statThread);
                    (void)pthread_join(statThread, NULL);
                    (void)fifoCloseWhenEmpty(fifo);
                    (void)pthread_join(productMakerThread, NULL);

                    if (0 != status)
                        status = pmStatus(productMaker);

                    reportStats();
                    readerFree(reader);
#ifdef RETRANS_SUPPORT
					/** Release buffer allocated for retransmission **/
					if(retrans_xmit_enable == OPTION_ENABLE){
					  freeRetransMem();
					}
#endif
                }               /* "reader" spawned */

                (void)lpqClose(prodQueue);
            }                       /* "prodQueue" open */
        }                           /* "fifo" created */
    }                               /* command line decoded */

    return status;
}