static int __init mtd_stresstest_init(void)
{
int err;
int i, op;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
printk(PRINT_PREF "not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
/* Read or write up 2 eraseblocks at a time */
bufsize = mtd->erasesize * 2;
err = -ENOMEM;
readbuf = vmalloc(bufsize);
writebuf = vmalloc(bufsize);
offsets = kmalloc(ebcnt * sizeof(int), GFP_KERNEL);
if (!readbuf || !writebuf || !offsets) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
for (i = 0; i < ebcnt; i++)
offsets[i] = mtd->erasesize;
simple_srand(current->pid);
for (i = 0; i < bufsize; i++)
writebuf[i] = simple_rand();
err = scan_for_bad_eraseblocks();
if (err)
goto out;
/* Do operations */
printk(PRINT_PREF "doing operations\n");
for (op = 0; op < count; op++) {
if ((op & 1023) == 0)
printk(PRINT_PREF "%d operations done\n", op);
err = do_operation();
if (err)
goto out;
cond_resched();
}
printk(PRINT_PREF "finished, %d operations done\n", op);
out:
kfree(offsets);
kfree(bbt);
vfree(writebuf);
vfree(readbuf);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_speedtest_init(void)
{
int err, i, blocks, j, k;
long speed;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
if (count)
printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
else
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
printk(PRINT_PREF "not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
if (count > 0 && count < ebcnt)
ebcnt = count;
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
simple_srand(1);
set_random_data(iobuf, mtd->erasesize);
err = scan_for_bad_eraseblocks();
if (err)
goto out;
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
/* Erase all eraseblocks */
printk(PRINT_PREF "Testing erase speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = erase_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
/* Multi-block erase all eraseblocks */
for (k = 1; k < 7; k++) {
blocks = 1 << k;
printk(PRINT_PREF "Testing %dx multi-block erase speed\n",
blocks);
start_timing();
for (i = 0; i < ebcnt; ) {
for (j = 0; j < blocks && (i + j) < ebcnt; j++)
if (bbt[i + j])
break;
if (j < 1) {
i++;
continue;
}
err = multiblock_erase(i, j);
if (err)
goto out;
cond_resched();
i += j;
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "%dx multi-block erase speed is %ld KiB/s\n",
blocks, speed);
}
printk(PRINT_PREF "finished\n");
out:
kfree(iobuf);
kfree(bbt);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_oobtest_init(void)
{
int err = 0;
unsigned int i;
uint64_t tmp;
struct mtd_oob_ops ops;
loff_t addr = 0, addr0;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->type != MTD_NANDFLASH) {
printk(PRINT_PREF "this test requires NAND flash\n");
goto out;
}
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
mtd->writesize, ebcnt, pgcnt, mtd->oobsize);
err = -ENOMEM;
mtd->erasesize = mtd->erasesize;
readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!readbuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!writebuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
err = scan_for_bad_eraseblocks();
if (err)
goto out;
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
vary_offset = 0;
printk(PRINT_PREF "test 1 of 5\n");
err = erase_whole_device();
if (err)
goto out;
simple_srand(1);
err = write_whole_device();
if (err)
goto out;
simple_srand(1);
err = verify_all_eraseblocks();
if (err)
goto out;
printk(PRINT_PREF "test 2 of 5\n");
err = erase_whole_device();
if (err)
goto out;
simple_srand(3);
err = write_whole_device();
if (err)
goto out;
simple_srand(3);
printk(PRINT_PREF "verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = verify_eraseblock_in_one_go(i);
if (err)
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "verified up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "verified %u eraseblocks\n", i);
printk(PRINT_PREF "test 3 of 5\n");
err = erase_whole_device();
if (err)
goto out;
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
vary_offset = 1;
simple_srand(5);
printk(PRINT_PREF "writing OOBs of whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "written up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "written %u eraseblocks\n", i);
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
vary_offset = 1;
simple_srand(5);
err = verify_all_eraseblocks();
if (err)
goto out;
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
vary_offset = 0;
printk(PRINT_PREF "test 4 of 5\n");
err = erase_whole_device();
if (err)
goto out;
addr0 = 0;
for (i = 0; i < ebcnt && bbt[i]; ++i)
addr0 += mtd->erasesize;
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
ops.ooboffs = mtd->ecclayout->oobavail;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
printk(PRINT_PREF "attempting to start write past end of OOB\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->write_oob(mtd, addr0, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: can write past end of OOB\n");
errcnt += 1;
}
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
ops.ooboffs = mtd->ecclayout->oobavail;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
printk(PRINT_PREF "attempting to start read past end of OOB\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->read_oob(mtd, addr0, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: can read past end of OOB\n");
errcnt += 1;
}
if (bbt[ebcnt - 1])
printk(PRINT_PREF "skipping end of device tests because last "
"block is bad\n");
else {
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
printk(PRINT_PREF "attempting to write past end of device\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->write_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: wrote past end of device\n");
errcnt += 1;
}
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
printk(PRINT_PREF "attempting to read past end of device\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->read_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: read past end of device\n");
errcnt += 1;
}
err = erase_eraseblock(ebcnt - 1);
if (err)
goto out;
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
printk(PRINT_PREF "attempting to write past end of device\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->write_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: wrote past end of device\n");
errcnt += 1;
}
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
printk(PRINT_PREF "attempting to read past end of device\n");
printk(PRINT_PREF "an error is expected...\n");
err = mtd->read_oob(mtd, mtd->size - mtd->writesize, &ops);
if (err) {
printk(PRINT_PREF "error occurred as expected\n");
err = 0;
} else {
printk(PRINT_PREF "error: read past end of device\n");
errcnt += 1;
}
}
printk(PRINT_PREF "test 5 of 5\n");
err = erase_whole_device();
if (err)
goto out;
simple_srand(11);
printk(PRINT_PREF "writing OOBs of whole device\n");
for (i = 0; i < ebcnt - 1; ++i) {
int cnt = 2;
int pg;
size_t sz = mtd->ecclayout->oobavail;
if (bbt[i] || bbt[i + 1])
continue;
addr = (i + 1) * mtd->erasesize - mtd->writesize;
for (pg = 0; pg < cnt; ++pg) {
set_random_data(writebuf, sz);
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = sz;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
err = mtd->write_oob(mtd, addr, &ops);
if (err)
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "written up to eraseblock "
"%u\n", i);
cond_resched();
addr += mtd->writesize;
}
}
printk(PRINT_PREF "written %u eraseblocks\n", i);
simple_srand(11);
printk(PRINT_PREF "verifying all eraseblocks\n");
for (i = 0; i < ebcnt - 1; ++i) {
if (bbt[i] || bbt[i + 1])
continue;
set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
addr = (i + 1) * mtd->erasesize - mtd->writesize;
ops.mode = MTD_OOB_AUTO;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail * 2;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd->read_oob(mtd, addr, &ops);
if (err)
goto out;
if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) {
printk(PRINT_PREF "error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
if (errcnt > 1000) {
printk(PRINT_PREF "error: too many errors\n");
goto out;
}
}
if (i % 256 == 0)
printk(PRINT_PREF "verified up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "verified %u eraseblocks\n", i);
printk(PRINT_PREF "finished with %d errors\n", errcnt);
out:
kfree(bbt);
kfree(writebuf);
kfree(readbuf);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_subpagetest_init(void)
{
int err = 0;
uint32_t i;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->type != MTD_NANDFLASH) {
printk(PRINT_PREF "this test requires NAND flash\n");
goto out;
}
subpgsize = mtd->writesize >> mtd->subpage_sft;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, subpage size %u, count of eraseblocks %u, "
"pages per eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
mtd->writesize, subpgsize, ebcnt, pgcnt, mtd->oobsize);
err = -ENOMEM;
bufsize = subpgsize * 32;
writebuf = kmalloc(bufsize, GFP_KERNEL);
if (!writebuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
readbuf = kmalloc(bufsize, GFP_KERNEL);
if (!readbuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
err = scan_for_bad_eraseblocks();
if (err)
goto out;
err = erase_whole_device();
if (err)
goto out;
printk(PRINT_PREF "writing whole device\n");
simple_srand(1);
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (unlikely(err))
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "written up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "written %u eraseblocks\n", i);
simple_srand(1);
printk(PRINT_PREF "verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = verify_eraseblock(i);
if (unlikely(err))
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "verified up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "verified %u eraseblocks\n", i);
err = erase_whole_device();
if (err)
goto out;
err = verify_all_eraseblocks_ff();
if (err)
goto out;
/* Write all eraseblocks */
simple_srand(3);
printk(PRINT_PREF "writing whole device\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock2(i);
if (unlikely(err))
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "written up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "written %u eraseblocks\n", i);
/* Check all eraseblocks */
simple_srand(3);
printk(PRINT_PREF "verifying all eraseblocks\n");
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = verify_eraseblock2(i);
if (unlikely(err))
goto out;
if (i % 256 == 0)
printk(PRINT_PREF "verified up to eraseblock %u\n", i);
cond_resched();
}
printk(PRINT_PREF "verified %u eraseblocks\n", i);
err = erase_whole_device();
if (err)
goto out;
err = verify_all_eraseblocks_ff();
if (err)
goto out;
printk(PRINT_PREF "finished with %d errors\n", errcnt);
out:
kfree(bbt);
kfree(readbuf);
kfree(writebuf);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_pagetest_init(void)
{
int err = 0;
uint64_t tmp;
uint32_t i;
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "\n");
#else
;
#endif
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "=================================================\n");
#else
;
#endif
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "MTD device: %d\n", dev);
#else
;
#endif
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "error: cannot get MTD device\n");
#else
;
#endif
return err;
}
if (mtd->type != MTD_NANDFLASH) {
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "this test requires NAND flash\n");
#else
;
#endif
goto out;
}
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / mtd->writesize;
pgsize = mtd->writesize;
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
#else
;
#endif
err = -ENOMEM;
bufsize = pgsize * 2;
writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!writebuf) {
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "error: cannot allocate memory\n");
#else
;
#endif
goto out;
}
twopages = kmalloc(bufsize, GFP_KERNEL);
if (!twopages) {
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "error: cannot allocate memory\n");
#else
;
#endif
goto out;
}
boundary = kmalloc(bufsize, GFP_KERNEL);
if (!boundary) {
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "error: cannot allocate memory\n");
#else
;
#endif
goto out;
}
err = scan_for_bad_eraseblocks();
if (err)
goto out;
/* Erase all eraseblocks */
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "erasing whole device\n");
#else
;
#endif
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = erase_eraseblock(i);
if (err)
goto out;
cond_resched();
}
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "erased %u eraseblocks\n", i);
#else
;
#endif
/* Write all eraseblocks */
simple_srand(1);
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "writing whole device\n");
#else
;
#endif
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
if (i % 256 == 0)
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "written up to eraseblock %u\n", i);
#else
;
#endif
cond_resched();
}
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "written %u eraseblocks\n", i);
#else
;
#endif
/* Check all eraseblocks */
simple_srand(1);
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "verifying all eraseblocks\n");
#else
;
#endif
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = verify_eraseblock(i);
if (err)
goto out;
if (i % 256 == 0)
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "verified up to eraseblock %u\n", i);
#else
;
#endif
cond_resched();
}
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "verified %u eraseblocks\n", i);
#else
;
#endif
err = crosstest();
if (err)
goto out;
err = erasecrosstest();
if (err)
goto out;
err = erasetest();
if (err)
goto out;
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "finished with %d errors\n", errcnt);
#else
;
#endif
out:
kfree(bbt);
kfree(boundary);
kfree(twopages);
kfree(writebuf);
put_mtd_device(mtd);
if (err)
#ifdef CONFIG_DEBUG_PRINTK
printk(PRINT_PREF "error %d occurred\n", err);
#else
;
#endif
#ifdef CONFIG_DEBUG_PRINTK
printk(KERN_INFO "=================================================\n");
#else
;
#endif
return err;
}
static int __init fsspeed_init(void)
{
int err, i;
long speed;
struct file *fp;
mm_segment_t fs;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "rw %d PAGES using file: %s\n", count, fname);
err = -ENOMEM;
iobuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!iobuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
simple_srand(1);
set_random_data(iobuf, PAGE_SIZE);
fp = filp_open(fname, O_RDWR|O_CREAT, 0600);
if (IS_ERR(fp)) {
printk("open file %s failed.\n", fname);
err = PTR_ERR(fp);
goto out;
}
/* Write all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing file system write speed\n");
fs = get_fs();
set_fs(KERNEL_DS);
start_timing();
for (i = 0; i < count; ++i) {
err = vfs_write(fp, iobuf, PAGE_SIZE, &fp->f_pos);
if (err < 0)
goto out2;
// cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "write speed is %ld KiB/s\n", speed);
vfs_fsync(fp, fp->f_path.dentry, 0);
invalidate_mapping_pages(fp->f_dentry->d_inode->i_mapping, 0, -1);
vfs_llseek(fp, 0, SEEK_SET);
/* Read all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing file system read speed\n");
start_timing();
for (i = 0; i < count; ++i) {
err = vfs_read(fp, iobuf, PAGE_SIZE, &fp->f_pos);
if (err < 0)
goto out2;
// cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "read speed is %ld KiB/s\n", speed);
printk(PRINT_PREF "finished\n");
err = 0;
out2:
filp_close(fp, NULL);
set_fs(fs);
out:
kfree(iobuf);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_speedtest_init(void)
{
int err, i;
long speed;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
printk(PRINT_PREF "not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
simple_srand(1);
set_random_data(iobuf, mtd->erasesize);
err = scan_for_bad_eraseblocks();
if (err)
goto out;
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
/* Erase all eraseblocks */
printk(PRINT_PREF "Testing erase speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = erase_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
printk(PRINT_PREF "finished\n");
out:
kfree(iobuf);
kfree(bbt);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
