int
main(int argc, char *argv[])
{
int ch;
ino_t ino;
char *inputdev;
char *symtbl = "./restoresymtable";
char *p, name[MAXPATHLEN];
/* Temp files should *not* be readable. We set permissions later. */
(void) umask(077);
if (argc < 2)
usage();
(void)setlocale(LC_ALL, "");
inputdev = NULL;
obsolete(&argc, &argv);
while ((ch = getopt(argc, argv, "b:dDf:himNP:Rrs:tuvxy")) != -1)
switch(ch) {
case 'b':
/* Change default tape blocksize. */
bflag = 1;
ntrec = strtol(optarg, &p, 10);
if (*p)
errx(1, "illegal blocksize -- %s", optarg);
if (ntrec <= 0)
errx(1, "block size must be greater than 0");
break;
case 'd':
dflag = 1;
break;
case 'D':
Dflag = 1;
break;
case 'f':
if (pipecmd)
errx(1,
"-P and -f options are mutually exclusive");
inputdev = optarg;
break;
case 'P':
if (!pipecmd && inputdev)
errx(1,
"-P and -f options are mutually exclusive");
inputdev = optarg;
pipecmd = 1;
break;
case 'h':
hflag = 0;
break;
case 'i':
case 'R':
case 'r':
case 't':
case 'x':
if (command != '\0')
errx(1,
"%c and %c options are mutually exclusive",
ch, command);
command = ch;
break;
case 'm':
mflag = 0;
break;
case 'N':
Nflag = 1;
break;
case 's':
/* Dumpnum (skip to) for multifile dump tapes. */
dumpnum = strtol(optarg, &p, 10);
if (*p)
errx(1, "illegal dump number -- %s", optarg);
if (dumpnum <= 0)
errx(1, "dump number must be greater than 0");
break;
case 'u':
uflag = 1;
break;
case 'v':
vflag = 1;
break;
case 'y':
yflag = 1;
break;
default:
usage();
}
argc -= optind;
argv += optind;
if (command == '\0')
errx(1, "none of i, R, r, t or x options specified");
if (signal(SIGINT, onintr) == SIG_IGN)
(void) signal(SIGINT, SIG_IGN);
if (signal(SIGTERM, onintr) == SIG_IGN)
(void) signal(SIGTERM, SIG_IGN);
setlinebuf(stderr);
if (inputdev == NULL && (inputdev = getenv("TAPE")) == NULL)
inputdev = _PATH_DEFTAPE;
setinput(inputdev, pipecmd);
if (argc == 0) {
argc = 1;
*--argv = ".";
}
switch (command) {
/*
* Interactive mode.
*/
case 'i':
setup();
extractdirs(1);
initsymtable(NULL);
runcmdshell();
break;
/*
* Incremental restoration of a file system.
*/
case 'r':
setup();
if (dumptime > 0) {
/*
* This is an incremental dump tape.
*/
vprintf(stdout, "Begin incremental restore\n");
initsymtable(symtbl);
extractdirs(1);
removeoldleaves();
vprintf(stdout, "Calculate node updates.\n");
treescan(".", ROOTINO, nodeupdates);
findunreflinks();
removeoldnodes();
} else {
/*
* This is a level zero dump tape.
*/
vprintf(stdout, "Begin level 0 restore\n");
initsymtable((char *)0);
extractdirs(1);
vprintf(stdout, "Calculate extraction list.\n");
treescan(".", ROOTINO, nodeupdates);
}
createleaves(symtbl);
createlinks();
setdirmodes(FORCE);
checkrestore();
if (dflag) {
vprintf(stdout, "Verify the directory structure\n");
treescan(".", ROOTINO, verifyfile);
}
dumpsymtable(symtbl, (long)1);
break;
/*
* Resume an incremental file system restoration.
*/
case 'R':
initsymtable(symtbl);
skipmaps();
skipdirs();
createleaves(symtbl);
createlinks();
setdirmodes(FORCE);
checkrestore();
dumpsymtable(symtbl, (long)1);
break;
/*
* List contents of tape.
*/
case 't':
setup();
extractdirs(0);
initsymtable((char *)0);
while (argc--) {
canon(*argv++, name, sizeof(name));
ino = dirlookup(name);
if (ino == 0)
continue;
treescan(name, ino, listfile);
}
break;
/*
* Batch extraction of tape contents.
*/
case 'x':
setup();
extractdirs(1);
initsymtable((char *)0);
while (argc--) {
canon(*argv++, name, sizeof(name));
ino = dirlookup(name);
if (ino == 0)
continue;
if (mflag)
pathcheck(name);
treescan(name, ino, addfile);
}
createfiles();
createlinks();
setdirmodes(0);
if (dflag)
checkrestore();
break;
}
done(0);
/* NOTREACHED */
}
/*
* This is the routine used to extract files for the 'r' command.
* Extract new leaves.
*/
void
createleaves(char *symtabfile)
{
struct entry *ep;
ino_t first;
long curvol;
if (command == 'R') {
vprintf(stdout, "Continue extraction of new leaves\n");
} else {
vprintf(stdout, "Extract new leaves.\n");
dumpsymtable(symtabfile, volno);
}
first = lowerbnd(ROOTINO);
curvol = volno;
while (curfile.ino < maxino) {
first = lowerbnd(first);
/*
* If the next available file is not the one which we
* expect then we have missed one or more files. Since
* we do not request files that were not on the tape,
* the lost files must have been due to a tape read error,
* or a file that was removed while the dump was in progress.
*/
while (first < curfile.ino) {
ep = lookupino(first);
if (ep == NULL)
panic("%ju: bad first\n", (uintmax_t)first);
fprintf(stderr, "%s: not found on tape\n", myname(ep));
ep->e_flags &= ~(NEW|EXTRACT);
first = lowerbnd(first);
}
/*
* If we find files on the tape that have no corresponding
* directory entries, then we must have found a file that
* was created while the dump was in progress. Since we have
* no name for it, we discard it knowing that it will be
* on the next incremental tape.
*/
if (first != curfile.ino) {
fprintf(stderr, "expected next file %ju, got %ju\n",
(uintmax_t)first, (uintmax_t)curfile.ino);
skipfile();
goto next;
}
ep = lookupino(curfile.ino);
if (ep == NULL)
panic("unknown file on tape\n");
if ((ep->e_flags & (NEW|EXTRACT)) == 0)
badentry(ep, "unexpected file on tape");
/*
* If the file is to be extracted, then the old file must
* be removed since its type may change from one leaf type
* to another (e.g. "file" to "character special").
*/
if ((ep->e_flags & EXTRACT) != 0) {
removeleaf(ep);
ep->e_flags &= ~REMOVED;
}
(void) extractfile(myname(ep));
ep->e_flags &= ~(NEW|EXTRACT);
/*
* We checkpoint the restore after every tape reel, so
* as to simplify the amount of work required by the
* 'R' command.
*/
next:
if (curvol != volno) {
dumpsymtable(symtabfile, volno);
skipmaps();
curvol = volno;
}
}
}
/*
* This is the routine used to extract files for the 'x' and 'i' commands.
* Efficiently extract a subset of the files on a tape.
*/
void
createfiles(void)
{
ino_t first, next, last;
struct entry *ep;
long curvol;
vprintf(stdout, "Extract requested files\n");
curfile.action = SKIP;
getvol((long)1);
skipmaps();
skipdirs();
first = lowerbnd(ROOTINO);
last = upperbnd(maxino - 1);
for (;;) {
curvol = volno;
first = lowerbnd(first);
last = upperbnd(last);
/*
* Check to see if any files remain to be extracted
*/
if (first > last)
return;
if (Dflag) {
if (curfile.ino == maxino)
return;
if((ep = lookupino(curfile.ino)) != NULL &&
(ep->e_flags & (NEW|EXTRACT))) {
goto justgetit;
} else {
skipfile();
continue;
}
}
/*
* Reject any volumes with inodes greater than the last
* one needed, so that we can quickly skip backwards to
* a volume containing useful inodes. We can't do this
* if there are no further volumes available (curfile.ino
* >= maxino) or if we are already at the first tape.
*/
if (curfile.ino > last && curfile.ino < maxino && volno > 1) {
curfile.action = SKIP;
getvol((long)0);
skipmaps();
skipdirs();
continue;
}
/*
* Decide on the next inode needed.
* Skip across the inodes until it is found
* or a volume change is encountered
*/
if (curfile.ino < maxino) {
next = lowerbnd(curfile.ino);
while (next > curfile.ino && volno == curvol)
skipfile();
if (volno != curvol) {
skipmaps();
skipdirs();
continue;
}
} else {
/*
* No further volumes or inodes available. Set
* `next' to the first inode, so that a warning
* is emitted below for each missing file.
*/
next = first;
}
/*
* If the current inode is greater than the one we were
* looking for then we missed the one we were looking for.
* Since we only attempt to extract files listed in the
* dump map, the lost files must have been due to a tape
* read error, or a file that was removed while the dump
* was in progress. Thus we report all requested files
* between the one we were looking for, and the one we
* found as missing, and delete their request flags.
*/
while (next < curfile.ino) {
ep = lookupino(next);
if (ep == NULL)
panic("corrupted symbol table\n");
fprintf(stderr, "%s: not found on tape\n", myname(ep));
ep->e_flags &= ~NEW;
next = lowerbnd(next);
}
/*
* The current inode is the one that we are looking for,
* so extract it per its requested name.
*/
if (next == curfile.ino && next <= last) {
ep = lookupino(next);
if (ep == NULL)
panic("corrupted symbol table\n");
justgetit:
(void) extractfile(myname(ep));
ep->e_flags &= ~NEW;
if (volno != curvol)
skipmaps();
}
}
}
/*
* This is the routine used to extract files for the 'x' and 'i' commands.
* Efficiently extract a subset of the files on a tape.
*/
void
createfiles(void)
{
ino_t first, next, last;
struct entry *ep;
long curvol;
Vprintf(stdout, "Extract requested files\n");
curfile.action = SKIP;
getvol((long)1);
skipmaps();
skipdirs();
first = lowerbnd(ROOTINO);
last = upperbnd(maxino - 1);
for (;;) {
first = lowerbnd(first);
last = upperbnd(last);
/*
* Check to see if any files remain to be extracted
*/
if (first > last)
return;
/*
* Reject any volumes with inodes greater
* than the last one needed
*/
while (curfile.ino > last) {
curfile.action = SKIP;
getvol((long)0);
skipmaps();
skipdirs();
}
/*
* Decide on the next inode needed.
* Skip across the inodes until it is found
* or an out of order volume change is encountered
*/
next = lowerbnd(curfile.ino);
do {
curvol = volno;
while (next > curfile.ino && volno == curvol)
skipfile();
skipmaps();
skipdirs();
} while (volno == curvol + 1);
/*
* If volume change out of order occurred the
* current state must be recalculated
*/
if (volno != curvol)
continue;
/*
* If the current inode is greater than the one we were
* looking for then we missed the one we were looking for.
* Since we only attempt to extract files listed in the
* dump map, the lost files must have been due to a tape
* read error, or a file that was removed while the dump
* was in progress. Thus we report all requested files
* between the one we were looking for, and the one we
* found as missing, and delete their request flags.
*/
while (next < curfile.ino) {
ep = lookupino(next);
if (ep == NULL)
panic("corrupted symbol table\n");
fprintf(stderr, "%s: not found on tape\n", myname(ep));
ep->e_flags &= ~NEW;
next = lowerbnd(next);
}
/*
* The current inode is the one that we are looking for,
* so extract it per its requested name.
*/
if (next == curfile.ino && next <= last) {
ep = lookupino(next);
if (ep == NULL)
panic("corrupted symbol table\n");
(void)extractfile(myname(ep));
ep->e_flags &= ~NEW;
if (volno != curvol)
skipmaps();
}
}
}
