void smf_mapbounds( int fast, Grp *igrp, int size, const char *system,
AstFrameSet *spacerefwcs, int alignsys, int *lbnd_out,
int *ubnd_out, AstFrameSet **outframeset, int *moving,
smfBox ** boxes, fts2Port fts_port, int *status ) {
/* Local Variables */
AstSkyFrame *abskyframe = NULL; /* Output Absolute SkyFrame */
int actval; /* Number of parameter values supplied */
AstMapping *bolo2map = NULL; /* Combined mapping bolo->map
coordinates, WCS->GRID Mapping from
input WCS FrameSet */
smfBox *box = NULL; /* smfBox for current file */
smfData *data = NULL; /* pointer to SCUBA2 data struct */
double dlbnd[ 2 ]; /* Floating point lower bounds for output map */
drcntrl_bits drcntrl_mask = 0;/* Mask to use for DRCONTROL on this instrument */
double dubnd[ 2 ]; /* Floating point upper bounds for output map */
AstMapping *fast_map = NULL; /* Mapping from tracking to absolute map coords */
smfFile *file = NULL; /* SCUBA2 data file information */
int first; /* Is this the first good subscan ? */
AstFitsChan *fitschan = NULL;/* Fits channels to construct WCS header */
AstFrameSet *fs = NULL; /* A general purpose FrameSet pointer */
smfHead *hdr = NULL; /* Pointer to data header this time slice */
int i; /* Loop counter */
dim_t j; /* Loop counter */
AstSkyFrame *junksky = NULL; /* Unused SkyFrame argument */
dim_t k; /* Loop counter */
int lbnd0[ 2 ]; /* Defaults for LBND parameter */
double map_pa=0; /* Map PA in output coord system (rads) */
dim_t maxloop; /* Number of times to go round the time slice loop */
dim_t nbadt = 0; /* Number of bad time slices */
dim_t ngoodt = 0; /* Number of good time slices */
double par[7]; /* Projection parameters */
double shift[ 2 ]; /* Shifts from PIXEL to GRID coords */
AstMapping *oskymap = NULL; /* Mapping celestial->map coordinates,
Sky <> PIXEL mapping in output
FrameSet */
AstSkyFrame *oskyframe = NULL;/* Output SkyFrame */
char *refsys = NULL; /* Sky system from supplied reference FrameSet */
dim_t textreme[4]; /* Time index corresponding to minmax TCS posn */
AstFrame *skyin = NULL; /* Sky Frame in input FrameSet */
double skyref[ 2 ]; /* Values for output SkyFrame SkyRef attribute */
struct timeval tv1; /* Timer */
struct timeval tv2; /* Timer */
AstMapping *tmap; /* Temporary Mapping */
int trim; /* Trim borders of bad pixels from o/p image? */
int ubnd0[ 2 ]; /* Defaults for UBND parameter */
double x_array_corners[4]; /* X-Indices for corner bolos in array */
double x_map[4]; /* Projected X-coordinates of corner bolos */
double y_array_corners[4]; /* Y-Indices for corner pixels in array */
double y_map[4]; /* Projected X-coordinates of corner bolos */
/* Main routine */
if (*status != SAI__OK) return;
/* Start a timer to see how long this takes */
smf_timerinit( &tv1, &tv2, status );
/* Initialize pointer to output FrameSet and moving-source flag */
*outframeset = NULL;
*moving = 0;
/* initialize double precision output bounds and the proj pars */
for( i = 0; i < 7; i++ ) par[ i ] = AST__BAD;
dlbnd[ 0 ] = VAL__MAXD;
dlbnd[ 1 ] = VAL__MAXD;
dubnd[ 0 ] = VAL__MIND;
dubnd[ 1 ] = VAL__MIND;
/* If we have a supplied reference WCS we can use that directly
without having to calculate it from the data. Replace the requested
system with the system from the reference FrameSet (take a copy of the
string since astGetC may re-use its buffer). */
if (spacerefwcs) {
oskyframe = astGetFrame( spacerefwcs, AST__CURRENT );
int nc = 0;
refsys = astAppendString( NULL, &nc, astGetC( oskyframe, "System" ) );
system = refsys;
}
/* Create array of returned smfBox structures and store a pointer
to the next one to be initialised. */
*boxes = astMalloc( sizeof( smfBox ) * size );
box = *boxes;
astBegin;
/* Loop over all files in the Grp */
first = 1;
for( i=1; i<=size; i++, box++ ) {
/* Initialise the spatial bounds of section of the the output cube that is
contributed to by the current ionput file. */
box->lbnd[ 0 ] = VAL__MAXD;
box->lbnd[ 1 ] = VAL__MAXD;
box->ubnd[ 0 ] = VAL__MIND;
box->ubnd[ 1 ] = VAL__MIND;
/* Read data from the ith input file in the group */
smf_open_file( NULL, igrp, i, "READ", SMF__NOCREATE_DATA, &data, status );
if (*status != SAI__OK) {
msgSeti( "I", i );
errRep( "smf_mapbounds", "Could not open data file no ^I.", status );
break;
} else {
if( *status == SAI__OK ) {
if( data->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( data->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
} else if( data->hdr->fitshdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No FITS header associated with smfHead.",
status );
break;
}
}
}
/* convenience pointers */
file = data->file;
hdr = data->hdr;
/* report name of the input file */
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
msgSeti("I", i);
msgSeti("N", size);
msgOutif(MSG__VERB, " ",
"SMF_MAPBOUNDS: Processing ^I/^N ^FILE",
status);
/* Check that there are 3 pixel axes. */
if( data->ndims != 3 ) {
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
msgSeti( "NDIMS", data->ndims );
*status = SAI__ERROR;
errRep( FUNC_NAME, "^FILE has ^NDIMS pixel axes, should be 3.",
status );
break;
}
/* Check that the data dimensions are 3 (for time ordered data) */
if( *status == SAI__OK ) {
/* If OK Decide which detectors (GRID coord) to use for
checking bounds, depending on the instrument in use. */
switch( hdr->instrument ) {
case INST__SCUBA2:
drcntrl_mask = DRCNTRL__POSITION;
/* 4 corner bolometers of the subarray */
x_array_corners[0] = 1;
x_array_corners[1] = 1;
x_array_corners[2] = (data->dims)[0];
x_array_corners[3] = (data->dims)[0];
y_array_corners[0] = 1;
y_array_corners[1] = (data->dims)[1];
y_array_corners[2] = 1;
y_array_corners[3] = (data->dims)[1];
break;
case INST__AZTEC:
/* Rough guess for extreme bolometers around the edge */
x_array_corners[0] = 22;
x_array_corners[1] = 65;
x_array_corners[2] = 73;
x_array_corners[3] = 98;
y_array_corners[0] = 1; /* Always 1 for AzTEC */
y_array_corners[1] = 1;
y_array_corners[2] = 1;
y_array_corners[3] = 1;
break;
case INST__ACSIS:
smf_find_acsis_corners( data, x_array_corners, y_array_corners,
status);
break;
default:
*status = SAI__ERROR;
errRep(FUNC_NAME, "Don't know how to calculate mapbounds for data created with this instrument", status);
}
}
if( *status == SAI__OK) {
size_t goodidx = SMF__BADSZT;
/* Need to build up a frameset based on good telescope position.
We can not assume that we the first step will be a good TCS position
so we look for one. If we can not find anything we skip to the
next file. */
maxloop = (data->dims)[2];
for (j=0; j<maxloop; j++) {
JCMTState state = (hdr->allState)[j];
if (state.jos_drcontrol >= 0 && state.jos_drcontrol & drcntrl_mask ) {
/* bad TCS - so try again */
} else {
/* Good tcs */
goodidx = j;
break;
}
}
if (goodidx == SMF__BADSZT) {
smf_smfFile_msg( data->file, "FILE", 1, "<unknown>");
msgOutif( MSG__QUIET, "", "No good telescope positions found in file ^FILE. Ignoring",
status );
smf_close_file( NULL, &data, status );
continue;
}
/* If we are dealing with the first good file, create the output
SkyFrame. */
if( first ) {
first = 0;
/* Create output SkyFrame if it has not come from a reference */
if ( oskyframe == NULL ) {
/* smf_tslice_ast only needs to get called once to set up framesets */
if( hdr->wcs == NULL ) {
smf_tslice_ast( data, goodidx, 1, fts_port, status);
}
/* Retrieve input SkyFrame */
skyin = astGetFrame( hdr->wcs, AST__CURRENT );
smf_calc_skyframe( skyin, system, hdr, alignsys, &oskyframe, skyref,
moving, status );
/* Get the orientation of the map vertical within the output celestial
coordinate system. This is derived form the MAP_PA FITS header, which
gives the orientation of the map vertical within the tracking system. */
map_pa = smf_calc_mappa( hdr, system, skyin, status );
/* Provide a sensible default for the pixel size based on wavelength */
par[4] = smf_calc_telres( hdr->fitshdr, status );
par[4] *= AST__DD2R/3600.0;
par[5] = par[4];
/* Calculate the projection parameters. We do not enable autogrid determination
for SCUBA-2 so we do not need to obtain all the data before calculating
projection parameters. */
smf_get_projpar( oskyframe, skyref, *moving, 0, 0, NULL, 0,
map_pa, par, NULL, NULL, status );
if (skyin) skyin = astAnnul( skyin );
/* If the output skyframe has been supplied, we still need to
determine whether the source is moving or not, and set the
reference position. */
} else {
/* smf_tslice_ast only needs to get called once to set up framesets */
if( hdr->wcs == NULL ) {
smf_tslice_ast( data, goodidx, 1, fts_port, status);
}
/* Retrieve input SkyFrame */
skyin = astGetFrame( hdr->wcs, AST__CURRENT );
smf_calc_skyframe( skyin, system, hdr, alignsys, &junksky, skyref,
moving, status );
/* Store the sky reference position. If the target is moving,
ensure the returned SkyFrame represents offsets from the
reference position rather than absolute coords. */
astSetD( oskyframe, "SkyRef(1)", skyref[ 0 ] );
astSetD( oskyframe, "SkyRef(2)", skyref[ 1 ] );
if( *moving ) astSet( oskyframe, "SkyRefIs=Origin" );
/* Ensure the Epoch attribute in the map is set to the date of
the first data in the map, rather than the date in supplied
reference WCS. */
astSetD( oskyframe, "Epoch", astGetD( junksky, "Epoch" ) );
}
if ( *outframeset == NULL && oskyframe != NULL && (*status == SAI__OK)){
/* Now created a spatial Mapping. Use the supplied reference frameset
if supplied */
if (spacerefwcs) {
oskymap = astGetMapping( spacerefwcs, AST__BASE, AST__CURRENT );
} else {
/* Now populate a FitsChan with FITS-WCS headers describing
the required tan plane projection. The longitude and
latitude axis types are set to either (RA,Dec) or (AZ,EL)
to get the correct handedness. */
fitschan = astFitsChan ( NULL, NULL, " " );
smf_makefitschan( astGetC( oskyframe, "System"), &(par[0]),
&(par[2]), &(par[4]), par[6], fitschan, status );
astClear( fitschan, "Card" );
fs = astRead( fitschan );
/* Extract the output PIXEL->SKY Mapping. */
oskymap = astGetMapping( fs, AST__BASE, AST__CURRENT );
/* Tidy up */
fs = astAnnul( fs );
}
/* Create the output FrameSet */
*outframeset = astFrameSet( astFrame(2, "Domain=GRID"), " " );
/* Now add the SkyFrame to it */
astAddFrame( *outframeset, AST__BASE, oskymap, oskyframe );
/* Now add a POLANAL Frame if required (i.e. if the input time
series are POL-2 Q/U values). */
smf_addpolanal( *outframeset, hdr, status );
/* Invert the oskymap mapping */
astInvert( oskymap );
} /* End WCS FrameSet construction */
}
/* Get a copy of the output SkyFrame and ensure it represents
absolute coords rather than offset coords. */
abskyframe = astCopy( oskyframe );
astClear( abskyframe, "SkyRefIs" );
astClear( abskyframe, "AlignOffset" );
maxloop = (data->dims)[2];
if (fast) {
/* For scan map we scan through looking for largest telescope moves.
For dream/stare we just look at the start and end time slices to
account for sky rotation. */
if (hdr->obsmode != SMF__OBS_SCAN) {
textreme[0] = 0;
textreme[1] = (data->dims)[2] - 1;
maxloop = 2;
} else {
const char *tracksys;
double *ac1list, *ac2list, *bc1list, *bc2list, *p1, *p2, *p3, *p4;
double flbnd[4], fubnd[4];
JCMTState state;
/* If the output and tracking systems are different, get a
Mapping between them. */
tracksys = sc2ast_convert_system( (hdr->allState)[goodidx].tcs_tr_sys,
status );
if( strcmp( system, tracksys ) ) {
AstSkyFrame *tempsf = astCopy( abskyframe );
astSetC( tempsf, "System", tracksys );
AstFrameSet *tempfs = astConvert( tempsf, abskyframe, "" );
tmap = astGetMapping( tempfs, AST__BASE, AST__CURRENT );
fast_map = astSimplify( tmap );
tmap = astAnnul( tmap );
tempsf = astAnnul( tempsf );
tempfs = astAnnul( tempfs );
} else {
fast_map = NULL;
}
/* Copy all ac1/2 positions into two array, and transform them
from tracking to absolute output sky coords. */
ac1list = astMalloc( maxloop*sizeof( *ac1list ) );
ac2list = astMalloc( maxloop*sizeof( *ac2list ) );
if( *status == SAI__OK ) {
p1 = ac1list;
p2 = ac2list;
for( j = 0; j < maxloop; j++ ) {
state = (hdr->allState)[ j ];
*(p1++) = state.tcs_tr_ac1;
*(p2++) = state.tcs_tr_ac2;
}
if( fast_map ) astTran2( fast_map, maxloop, ac1list, ac2list, 1,
ac1list, ac2list );
}
/* If the target is moving, we need to adjust these ac1/2 values
to represent offsets from the base position. */
if( *moving ) {
/* Copy all bc1/2 positions into two arrays. */
bc1list = astMalloc( maxloop*sizeof( *bc1list ) );
bc2list = astMalloc( maxloop*sizeof( *bc2list ) );
if( *status == SAI__OK ) {
p1 = bc1list;
p2 = bc2list;
for( j = 0; j < maxloop; j++ ) {
state = (hdr->allState)[ j ];
*(p1++) = state.tcs_tr_bc1;
*(p2++) = state.tcs_tr_bc2;
}
/* Transform them from tracking to absolute output sky coords. */
if( fast_map ) astTran2( fast_map, maxloop, bc1list, bc2list,
1, bc1list, bc2list );
/* Replace each ac1/2 position with the offsets from the
corresponding base position. */
p1 = bc1list;
p2 = bc2list;
p3 = ac1list;
p4 = ac2list;
for( j = 0; j < maxloop; j++ ) {
smf_offsets( *(p1++), *(p2++), p3++, p4++, status );
}
}
/* We no longer need the base positions. */
bc1list = astFree( bc1list );
bc2list = astFree( bc2list );
}
/* Transform the ac1/2 position from output sky coords to
output pixel coords. */
astTran2( oskymap, maxloop, ac1list, ac2list, 1, ac1list, ac2list );
/* Find the bounding box containing these pixel coords and the
time slices at which the boresight touches each edge of this
box. */
flbnd[ 0 ] = VAL__MAXD;
flbnd[ 1 ] = VAL__MAXD;
fubnd[ 0 ] = VAL__MIND;
fubnd[ 1 ] = VAL__MIND;
for( j = 0; j < 4; j++ ) textreme[ j ] = (dim_t) VAL__BADI;
if( *status == SAI__OK ) {
p1 = ac1list;
p2 = ac2list;
for( j = 0; j < maxloop; j++,p1++,p2++ ) {
if( *p1 != VAL__BADD && *p2 != VAL__BADD ){
if ( *p1 < flbnd[0] ) { flbnd[0] = *p1; textreme[0] = j; }
if ( *p2 < flbnd[1] ) { flbnd[1] = *p2; textreme[1] = j; }
if ( *p1 > fubnd[0] ) { fubnd[0] = *p1; textreme[2] = j; }
if ( *p2 > fubnd[1] ) { fubnd[1] = *p2; textreme[3] = j; }
}
}
}
maxloop = 4;
msgSetd("X1", textreme[0]);
msgSetd("X2", textreme[1]);
msgSetd("X3", textreme[2]);
msgSetd("X4", textreme[3]);
msgOutif( MSG__DEBUG, " ",
"Extrema time slices are ^X1, ^X2, ^X3 and ^X4",
status);
ac1list = astFree( ac1list );
ac2list = astFree( ac2list );
}
}
/* Get the astrometry for all the relevant time slices in this data file */
for( j=0; j<maxloop; j++ ) {
dim_t ts; /* Actual time slice to use */
/* if we are doing the fast loop, we need to read the time slice
index from textreme. Else we just use the index */
if (fast) {
/* get the index but make sure it is good */
ts = textreme[j];
if (ts == (dim_t)VAL__BADI) continue;
} else {
ts = j;
}
/* Calculate the bolo to map-pixel transformation for this tslice */
bolo2map = smf_rebin_totmap( data, ts, abskyframe, oskymap,
*moving, fts_port, status );
if ( *status == SAI__OK ) {
/* skip if we did not get a mapping this time round */
if (!bolo2map) continue;
/* Check corner pixels in the array for their projected extent
on the sky to set the pixel bounds */
astTran2( bolo2map, 4, x_array_corners, y_array_corners, 1,
x_map, y_map );
/* Update min/max for this time slice */
for( k=0; k<4; k++ ) {
if( x_map[k] != AST__BAD && y_map[k] != AST__BAD ) {
if( x_map[k] < dlbnd[0] ) dlbnd[0] = x_map[k];
if( y_map[k] < dlbnd[1] ) dlbnd[1] = y_map[k];
if( x_map[k] > dubnd[0] ) dubnd[0] = x_map[k];
if( y_map[k] > dubnd[1] ) dubnd[1] = y_map[k];
if( x_map[k] < box->lbnd[0] ) box->lbnd[0] = x_map[k];
if( y_map[k] < box->lbnd[1] ) box->lbnd[1] = y_map[k];
if( x_map[k] > box->ubnd[0] ) box->ubnd[0] = x_map[k];
if( y_map[k] > box->ubnd[1] ) box->ubnd[1] = y_map[k];
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "Extreme positions are bad.", status );
break;
}
}
}
/* Explicitly annul these mappings each time slice for reduced
memory usage */
if (bolo2map) bolo2map = astAnnul( bolo2map );
if (fs) fs = astAnnul( fs );
/* Break out of loop over time slices if bad status */
if (*status != SAI__OK) goto CLEANUP;
}
/* Annul any remaining Ast objects before moving on to the next file */
if (fs) fs = astAnnul( fs );
if (bolo2map) bolo2map = astAnnul( bolo2map );
}
/* Close the data file */
smf_close_file( NULL, &data, status);
/* Break out of loop over data files if bad status */
if (*status != SAI__OK) goto CLEANUP;
}
/* make sure we got values - should not be possible with good status */
if (dlbnd[0] == VAL__MAXD || dlbnd[1] == VAL__MAXD) {
if (*status == SAI__OK) {
*status = SAI__ERROR;
errRep( " ", "Unable to find any valid map bounds", status );
}
}
if (nbadt > 0) {
msgOutf( "", " Processed %zu time slices to calculate bounds,"
" of which %zu had bad telescope data and were skipped",
status, (size_t)(ngoodt+nbadt), (size_t)nbadt );
}
/* If spatial reference wcs was supplied, store par values that result in
no change to the pixel origin. */
if( spacerefwcs ){
par[ 0 ] = 0.5;
par[ 1 ] = 0.5;
}
/* Need to re-align with the interim GRID coordinates */
lbnd_out[0] = ceil( dlbnd[0] - par[0] + 0.5 );
ubnd_out[0] = ceil( dubnd[0] - par[0] + 0.5 );
lbnd_out[1] = ceil( dlbnd[1] - par[1] + 0.5 );
ubnd_out[1] = ceil( dubnd[1] - par[1] + 0.5 );
/* Do the same with the individual input file bounding boxes */
box = *boxes;
for (i = 1; i <= size; i++, box++) {
box->lbnd[0] = ceil( box->lbnd[0] - par[0] + 0.5);
box->ubnd[0] = ceil( box->ubnd[0] - par[0] + 0.5);
box->lbnd[1] = ceil( box->lbnd[1] - par[1] + 0.5);
box->ubnd[1] = ceil( box->ubnd[1] - par[1] + 0.5);
}
/* Apply a ShiftMap to the output FrameSet to re-align the GRID
coordinates */
shift[0] = 2.0 - par[0] - lbnd_out[0];
shift[1] = 2.0 - par[1] - lbnd_out[1];
astRemapFrame( *outframeset, AST__BASE, astShiftMap( 2, shift, " " ) );
/* Set the dynamic defaults for lbnd/ubnd */
lbnd0[ 0 ] = lbnd_out[ 0 ];
lbnd0[ 1 ] = lbnd_out[ 1 ];
parDef1i( "LBND", 2, lbnd0, status );
ubnd0[ 0 ] = ubnd_out[ 0 ];
ubnd0[ 1 ] = ubnd_out[ 1 ];
parDef1i( "UBND", 2, ubnd0, status );
parGet1i( "LBND", 2, lbnd_out, &actval, status );
if( actval == 1 ) lbnd_out[ 1 ] = lbnd_out[ 0 ];
parGet1i( "UBND", 2, ubnd_out, &actval, status );
if( actval == 1 ) ubnd_out[ 1 ] = ubnd_out[ 0 ];
/* Ensure the bounds are the right way round. */
if( lbnd_out[ 0 ] > ubnd_out[ 0 ] ) {
int itmp = lbnd_out[ 0 ];
lbnd_out[ 0 ] = ubnd_out[ 0 ];
ubnd_out[ 0 ] = itmp;
}
if( lbnd_out[ 1 ] > ubnd_out[ 1 ] ) {
int itmp = lbnd_out[ 1 ];
lbnd_out[ 1 ] = ubnd_out[ 1 ];
ubnd_out[ 1 ] = itmp;
}
/* If borders of bad pixels are being trimmed from the output image,
then do not allow the user-specified bounds to extend outside the
default bounding box (since we know that the default bounding box
encloses all available data). */
parGet0l( "TRIM", &trim, status );
if( trim ) {
if( lbnd_out[ 0 ] < lbnd0[ 0 ] ) lbnd_out[ 0 ] = lbnd0[ 0 ];
if( lbnd_out[ 1 ] < lbnd0[ 1 ] ) lbnd_out[ 1 ] = lbnd0[ 1 ];
if( ubnd_out[ 0 ] > ubnd0[ 0 ] ) ubnd_out[ 0 ] = ubnd0[ 0 ];
if( ubnd_out[ 1 ] > ubnd0[ 1 ] ) ubnd_out[ 1 ] = ubnd0[ 1 ];
}
/* Modify the returned FrameSet to take account of the new pixel origin. */
shift[ 0 ] = lbnd0[ 0 ] - lbnd_out[ 0 ];
shift[ 1 ] = lbnd0[ 1 ] - lbnd_out[ 1 ];
if( shift[ 0 ] != 0.0 || shift[ 1 ] != 0.0 ) {
astRemapFrame( *outframeset, AST__BASE, astShiftMap( 2, shift, " " ) );
}
/* Report the pixel bounds of the cube. */
if( *status == SAI__OK ) {
msgOutif( MSG__NORM, " ", " ", status );
msgSeti( "XL", lbnd_out[ 0 ] );
msgSeti( "YL", lbnd_out[ 1 ] );
msgSeti( "XU", ubnd_out[ 0 ] );
msgSeti( "YU", ubnd_out[ 1 ] );
msgOutif( MSG__NORM, " ", " Output map pixel bounds: ( ^XL:^XU, ^YL:^YU )",
status );
if( ( ubnd_out[ 0 ] - lbnd_out[ 0 ] + 1 ) > MAX_DIM ||
( ubnd_out[ 1 ] - lbnd_out[ 1 ] + 1 ) > MAX_DIM ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": The map is too big. Check your list of input "
"data files does not include widely separated observations.",
status );
}
}
/* If no error has occurred, export the returned FrameSet pointer from the
current AST context so that it will not be annulled when the AST
context is ended. Otherwise, ensure a null pointer is returned. */
if( *status == SAI__OK ) {
astExport( *outframeset );
} else {
*outframeset = astAnnul( *outframeset );
}
msgOutiff( SMF__TIMER_MSG, "",
"Took %.3f s to calculate map bounds",
status, smf_timerupdate( &tv1, &tv2, status ) );
/* Clean Up */
CLEANUP:
if (*status != SAI__OK) {
errRep(FUNC_NAME, "Unable to determine map bounds", status);
}
if (oskymap) oskymap = astAnnul( oskymap );
if (bolo2map) bolo2map = astAnnul( bolo2map );
if (fitschan) fitschan = astAnnul( fitschan );
if( data != NULL )
smf_close_file( NULL, &data, status );
refsys = astFree( refsys );
astEnd;
}
void smf_mapbounds_approx( Grp *igrp, size_t index, char *system,
int *lbnd_out, int *ubnd_out, AstFrameSet **outframeset,
int *moving, int *status ) {
/* Local variables */
smfData *data = NULL; /* pointer to SCUBA2 data struct */
int dxpix; /* Map X offset in pixels */
int dypix; /* Map Y offset in pixels */
smfFile *file = NULL; /* SCUBA2 data file information */
AstFitsChan *fitschan = NULL;/* Fits channels to construct WCS header */
AstFrameSet *fs = NULL; /* A general purpose FrameSet pointer */
smfHead *hdr = NULL; /* Pointer to data header this time slice */
double hghtbox; /* Map height in arcsec */
int hghtpix; /* RA-Dec map height in pixels */
int i; /* loop counter */
dim_t k; /* Loop counter */
double maphght = 0.0; /* Map height in radians */
double mappa = 0.0; /* Map position angle in radians */
double mapwdth = 0.0; /* Map width in radians */
double mapx; /* Map X offset in radians */
double mapy; /* Map Y offset in radians */
double par[7]; /* Projection parameters */
double pixsize = 0.0; /* Requested pixel size */
double shift[ 2 ]; /* Shifts from PIXEL to GRID coords */
AstMapping *sky2map = NULL; /* Mapping celestial->map coordinates */
AstSkyFrame *skyframe = NULL;/* Output SkyFrame */
AstFrame *skyin = NULL; /* Sky Frame in input FrameSet */
double skyref[ 2 ]; /* Values for output SkyFrame SkyRef attribute */
AstFrameSet *swcsin = NULL; /* FrameSet describing input WCS */
int temp; /* Temporary variable */
double wdthbox; /* Map width in arcsec */
int wdthpix; /* RA-Dec map width in pixels */
double x_array_corners[4]; /* X-Indices for corner bolos in array */
double y_array_corners[4]; /* Y-Indices for corner pixels in array */
/* Main routine */
if (*status != SAI__OK) return;
/* Begin an AST context to ensure that all AST objects are annuled
before returning to caller */
astBegin;
/* Initialize output frameset pointer to NULL */
*outframeset = NULL;
for( i = 0; i < 7; i++ ) par[ i ] = AST__BAD;
/* Read data from the given input file in the group - note index
should be 1 as we use the first file in the Grp to define the map
bounds */
smf_open_file( igrp, index, "READ", SMF__NOCREATE_DATA, &data, status );
/* Simply abort if it is not a scan */
if (*status == SAI__OK && data->hdr->obsmode != SMF__OBS_SCAN) {
*status = SAI__ERROR;
errRep(" ", "Can not call smf_mapbounds_approx with non-scan observation"
" (possible programming error)", status);
goto CLEANUP;
}
/* Retrieve file name for use feedback */
file = data->file;
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
if( *status == SAI__OK ) {
msgOutif(MSG__VERB, " ",
"SMF_MAPBOUNDS_APPROX: Processing ^FILE",
status);
} else {
errRep( "smf_mapbounds_approx", "Couldn't open input file, ^FILE", status );
}
/* Check that the data dimensions are 3 (for time ordered data) */
if( *status == SAI__OK ) {
if( data->ndims != 3 ) {
smf_smfFile_msg( file, "FILE", 1, "<unknown>" );
msgSeti("THEDIMS", data->ndims);
*status = SAI__ERROR;
errRep("smf_mapbounds_approx",
"^FILE data has ^THEDIMS dimensions, should be 3.",
status);
}
}
/* Construct the WCS for the first time slice in this file */
smf_tslice_ast( data, 1, 1, NO_FTS, status);
/* Retrieve header for later constructing output WCS */
if( *status == SAI__OK) {
hdr = data->hdr;
swcsin = hdr->wcs;
/* Calculate default pixel size */
pixsize = smf_calc_telres( hdr->fitshdr, status );
/* Get the user defined pixel size - we trust that smf_get_projpar will
also read PIXSIZE and get the same answer. We pre-fill par[] to allow
PIXSIZE=! to accept the dynamic default in both places.*/
parGdr0d( "PIXSIZE", pixsize, 0, 60, 1, &pixsize, status );
par[4] = pixsize*AST__DD2R/3600.0;
par[5] = par[4];
/* Retrieve input SkyFrame */
skyin = astGetFrame( swcsin, AST__CURRENT );
/* Retrieve map height and width from header - will be undef for
non-scan so set up defaults first. */
mapwdth = 0.0;
maphght = 0.0;
smf_getfitsd( hdr, "MAP_WDTH", &mapwdth, status );
smf_getfitsd( hdr, "MAP_HGHT", &maphght, status );
/* Make an approximation if map height and width are not set -
note that this should ONLY apply for non-scan mode data */
if ( !mapwdth || !maphght ) {
if (*status == SAI__OK) {
*status = SAI__ERROR;
errRep(" ", "MAP_WDTH and MAP_HGHT must be > 0", status);
goto CLEANUP;
}
}
mapx = 0.0; /* Used if the FITS keyword values are undefed */
mapy = 0.0;
smf_getfitsd( hdr, "MAP_X", &mapx, status );
smf_getfitsd( hdr, "MAP_Y", &mapy, status );
/* Convert map Position Angle to radians */
mappa = 0.0;
smf_fits_getD( hdr, "MAP_PA", &mappa, status );
mappa *= AST__DD2R;
/* Calculate size of output map in pixels */
/* Note: this works for the simulator... */
wdthbox = mapwdth*fabs(cos(mappa)) + maphght*fabs(sin(mappa));
hghtbox = maphght*fabs(cos(mappa)) + mapwdth*fabs(sin(mappa));
wdthpix = (int) ( wdthbox / pixsize);
hghtpix = (int) ( wdthbox / pixsize);
dxpix = (int) (mapx / pixsize);
dypix = (int) (mapy / pixsize);
/* Get the offsets for each corner of the array */
temp = (wdthpix - 1) / 2;
x_array_corners[0] = dxpix - temp;
x_array_corners[1] = dxpix - temp;
x_array_corners[2] = dxpix + temp;
x_array_corners[3] = dxpix + temp;
temp = (hghtpix - 1) / 2;
y_array_corners[0] = dypix - temp;
y_array_corners[1] = dypix + temp;
y_array_corners[2] = dypix - temp;
y_array_corners[3] = dypix + temp;
lbnd_out[0] = x_array_corners[0];
ubnd_out[0] = x_array_corners[0];
lbnd_out[1] = y_array_corners[0];
ubnd_out[1] = y_array_corners[0];
/* Update min/max */
for( k=0; k<4; k++ ) {
if( x_array_corners[k] < lbnd_out[0] ) lbnd_out[0] = x_array_corners[k];
if( y_array_corners[k] < lbnd_out[1] ) lbnd_out[1] = y_array_corners[k];
if( x_array_corners[k] > ubnd_out[0] ) ubnd_out[0] = x_array_corners[k];
if( y_array_corners[k] > ubnd_out[1] ) ubnd_out[1] = y_array_corners[k];
}
} else {
goto CLEANUP;
}
/* Now create the output FrameSet. */
smf_calc_skyframe( skyin, system, hdr, 0, &skyframe, skyref, moving,
status );
/* Get the orientation of the map vertical within the output celestial
coordinate system. This is derived form the MAP_PA FITS header, which
gives the orientation of the map vertical within the tracking system. */
mappa = smf_calc_mappa( hdr, system, skyin, status );
/* Calculate the projection parameters. We do not enable autogrid determination
for SCUBA-2 so we do not need to obtain all the data before calculating
projection parameters. */
smf_get_projpar( skyframe, skyref, *moving, 0, 0, NULL, 0,
mappa, par, NULL, NULL, status );
/* Now populate a FitsChan with FITS-WCS headers describing the
required tan plane projection. The longitude and latitude axis
types are set to either (RA,Dec) or (AZ,EL) to get the correct
handedness. */
fitschan = astFitsChan ( NULL, NULL, " " );
smf_makefitschan( astGetC( skyframe, "System"), &(par[0]),
&(par[2]), &(par[4]), par[6], fitschan, status );
astClear( fitschan, "Card" );
fs = astRead( fitschan );
/* Extract the output PIXEL->SKY Mapping - note this is will be
inverted later to create the sk2map mapping */
sky2map = astGetMapping( fs, AST__BASE, AST__CURRENT );
/* Create the output FrameSet */
*outframeset = astFrameSet( astFrame(2, "Domain=GRID"), " " );
/* Now add the SkyFrame to it */
astAddFrame( *outframeset, AST__BASE, sky2map, skyframe );
/* Apply a ShiftMap to the output FrameSet to re-align the GRID
coordinates */
shift[0] = -lbnd_out[0];
shift[1] = -lbnd_out[1];
astRemapFrame( *outframeset, AST__BASE, astShiftMap( 2, shift, " " ) );
astExport( *outframeset );
/* Report the pixel bounds of the cube. */
if( *status == SAI__OK ) {
msgOutif( MSG__NORM, " ", " ", status );
msgSeti( "XL", lbnd_out[ 0 ] );
msgSeti( "YL", lbnd_out[ 1 ] );
msgSeti( "XU", ubnd_out[ 0 ] );
msgSeti( "YU", ubnd_out[ 1 ] );
msgOutif( MSG__NORM, " ", " Output map pixel bounds: ( ^XL:^XU, ^YL:^YU )",
status );
}
/* Change the pixel bounds to be consistent with the new CRPIX */
ubnd_out[0] -= lbnd_out[0]-1;
lbnd_out[0] = 1;
ubnd_out[1] -= lbnd_out[1]-1;
lbnd_out[1] = 1;
/* Clean Up */
CLEANUP:
if (*status != SAI__OK) {
errRep(FUNC_NAME, "Unable to determine map bounds", status);
}
if( data != NULL )
smf_close_file( &data, status);
astEnd;
}
