static int configure_t38(fax_params_t *f_params) { int method = 2; t38_set_t38_version(f_params->pvt.t38_core, f_params->t38_options.T38FaxVersion); t38_set_max_buffer_size(f_params->pvt.t38_core, f_params->t38_options.T38FaxMaxBuffer); t38_set_fastest_image_data_rate(f_params->pvt.t38_core, f_params->t38_options.T38MaxBitRate); t38_set_fill_bit_removal(f_params->pvt.t38_core, f_params->t38_options.T38FaxFillBitRemoval); t38_set_mmr_transcoding(f_params->pvt.t38_core, f_params->t38_options.T38FaxTranscodingMMR); t38_set_jbig_transcoding(f_params->pvt.t38_core, f_params->t38_options.T38FaxTranscodingJBIG); t38_set_max_datagram_size(f_params->pvt.t38_core, f_params->t38_options.T38FaxMaxDatagram); if(f_params->t38_options.T38FaxRateManagement) { if(!strcasecmp(f_params->t38_options.T38FaxRateManagement, "transferredTCF")) { method = 1; } else { method = 2; } } t38_set_data_rate_management_method(f_params->pvt.t38_core, method); return 0; }
static int transmit_audio(fax_session *s) { int res = -1; struct ast_format original_read_fmt; struct ast_format original_write_fmt; fax_state_t fax; t30_state_t *t30state; struct ast_frame *inf = NULL; int last_state = 0; struct timeval now, start, state_change; enum ast_t38_state t38_state; struct ast_control_t38_parameters t38_parameters = { .version = 0, .max_ifp = 800, .rate = AST_T38_RATE_14400, .rate_management = AST_T38_RATE_MANAGEMENT_TRANSFERRED_TCF, .fill_bit_removal = 1, /* * spandsp has API calls to support MMR and JBIG transcoding, but they aren't * implemented quite yet... so don't offer them to the remote endpoint * .transcoding_mmr = 1, * .transcoding_jbig = 1, */ }; ast_format_clear(&original_read_fmt); ast_format_clear(&original_write_fmt); /* if in called party mode, try to use T.38 */ if (s->caller_mode == FALSE) { /* check if we are already in T.38 mode (unlikely), or if we can request * a switch... if so, request it now and wait for the result, rather * than starting an audio FAX session that will have to be cancelled */ if ((t38_state = ast_channel_get_t38_state(s->chan)) == T38_STATE_NEGOTIATED) { return 1; } else if ((t38_state != T38_STATE_UNAVAILABLE) && (t38_parameters.request_response = AST_T38_REQUEST_NEGOTIATE, (ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters)) == 0))) { /* wait up to five seconds for negotiation to complete */ unsigned int timeout = 5000; int ms; ast_debug(1, "Negotiating T.38 for receive on %s\n", ast_channel_name(s->chan)); while (timeout > 0) { ms = ast_waitfor(s->chan, 1000); if (ms < 0) { ast_log(LOG_WARNING, "something bad happened while channel '%s' was polling.\n", ast_channel_name(s->chan)); return -1; } if (!ms) { /* nothing happened */ if (timeout > 0) { timeout -= 1000; continue; } else { ast_log(LOG_WARNING, "channel '%s' timed-out during the T.38 negotiation.\n", ast_channel_name(s->chan)); break; } } if (!(inf = ast_read(s->chan))) { return -1; } if ((inf->frametype == AST_FRAME_CONTROL) && (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) && (inf->datalen == sizeof(t38_parameters))) { struct ast_control_t38_parameters *parameters = inf->data.ptr; switch (parameters->request_response) { case AST_T38_NEGOTIATED: ast_debug(1, "Negotiated T.38 for receive on %s\n", ast_channel_name(s->chan)); res = 1; break; case AST_T38_REFUSED: ast_log(LOG_WARNING, "channel '%s' refused to negotiate T.38\n", ast_channel_name(s->chan)); break; default: ast_log(LOG_ERROR, "channel '%s' failed to negotiate T.38\n", ast_channel_name(s->chan)); break; } ast_frfree(inf); if (res == 1) { return 1; } else { break; } } ast_frfree(inf); } } } #if SPANDSP_RELEASE_DATE >= 20080725 /* for spandsp shaphots 0.0.6 and higher */ t30state = &fax.t30; #else /* for spandsp release 0.0.5 */ t30state = &fax.t30_state; #endif ast_format_copy(&original_read_fmt, ast_channel_readformat(s->chan)); if (original_read_fmt.id != AST_FORMAT_SLINEAR) { res = ast_set_read_format_by_id(s->chan, AST_FORMAT_SLINEAR); if (res < 0) { ast_log(LOG_WARNING, "Unable to set to linear read mode, giving up\n"); goto done; } } ast_format_copy(&original_write_fmt, ast_channel_writeformat(s->chan)); if (original_write_fmt.id != AST_FORMAT_SLINEAR) { res = ast_set_write_format_by_id(s->chan, AST_FORMAT_SLINEAR); if (res < 0) { ast_log(LOG_WARNING, "Unable to set to linear write mode, giving up\n"); goto done; } } /* Initialize T30 terminal */ fax_init(&fax, s->caller_mode); /* Setup logging */ set_logging(&fax.logging); set_logging(&t30state->logging); /* Configure terminal */ set_local_info(t30state, s); set_file(t30state, s); set_ecm(t30state, TRUE); fax_set_transmit_on_idle(&fax, TRUE); t30_set_phase_e_handler(t30state, phase_e_handler, s); start = state_change = ast_tvnow(); ast_activate_generator(s->chan, &generator, &fax); while (!s->finished) { inf = NULL; if ((res = ast_waitfor(s->chan, 25)) < 0) { ast_debug(1, "Error waiting for a frame\n"); break; } /* Watchdog */ now = ast_tvnow(); if (ast_tvdiff_sec(now, start) > WATCHDOG_TOTAL_TIMEOUT || ast_tvdiff_sec(now, state_change) > WATCHDOG_STATE_TIMEOUT) { ast_log(LOG_WARNING, "It looks like we hung. Aborting.\n"); res = -1; break; } if (!res) { /* There was timeout waiting for a frame. Loop around and wait again */ continue; } /* There is a frame available. Get it */ res = 0; if (!(inf = ast_read(s->chan))) { ast_debug(1, "Channel hangup\n"); res = -1; break; } ast_debug(10, "frame %d/%u, len=%d\n", inf->frametype, (unsigned int) inf->subclass.format.id, inf->datalen); /* Check the frame type. Format also must be checked because there is a chance that a frame in old format was already queued before we set channel format to slinear so it will still be received by ast_read */ if (inf->frametype == AST_FRAME_VOICE && inf->subclass.format.id == AST_FORMAT_SLINEAR) { if (fax_rx(&fax, inf->data.ptr, inf->samples) < 0) { /* I know fax_rx never returns errors. The check here is for good style only */ ast_log(LOG_WARNING, "fax_rx returned error\n"); res = -1; break; } if (last_state != t30state->state) { state_change = ast_tvnow(); last_state = t30state->state; } } else if ((inf->frametype == AST_FRAME_CONTROL) && (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS)) { struct ast_control_t38_parameters *parameters = inf->data.ptr; if (parameters->request_response == AST_T38_NEGOTIATED) { /* T38 switchover completed */ s->t38parameters = *parameters; ast_debug(1, "T38 negotiated, finishing audio loop\n"); res = 1; break; } else if (parameters->request_response == AST_T38_REQUEST_NEGOTIATE) { t38_parameters.request_response = AST_T38_NEGOTIATED; ast_debug(1, "T38 request received, accepting\n"); /* Complete T38 switchover */ ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters)); /* Do not break audio loop, wait until channel driver finally acks switchover * with AST_T38_NEGOTIATED */ } } ast_frfree(inf); inf = NULL; } ast_debug(1, "Loop finished, res=%d\n", res); if (inf) ast_frfree(inf); ast_deactivate_generator(s->chan); /* If we are switching to T38, remove phase E handler. Otherwise it will be executed by t30_terminate, display diagnostics and set status variables although no transmittion has taken place yet. */ if (res > 0) { t30_set_phase_e_handler(t30state, NULL, NULL); } t30_terminate(t30state); fax_release(&fax); done: if (original_write_fmt.id != AST_FORMAT_SLINEAR) { if (ast_set_write_format(s->chan, &original_write_fmt) < 0) ast_log(LOG_WARNING, "Unable to restore write format on '%s'\n", ast_channel_name(s->chan)); } if (original_read_fmt.id != AST_FORMAT_SLINEAR) { if (ast_set_read_format(s->chan, &original_read_fmt) < 0) ast_log(LOG_WARNING, "Unable to restore read format on '%s'\n", ast_channel_name(s->chan)); } return res; } static int transmit_t38(fax_session *s) { int res = 0; t38_terminal_state_t t38; struct ast_frame *inf = NULL; int last_state = 0; struct timeval now, start, state_change, last_frame; t30_state_t *t30state; t38_core_state_t *t38state; #if SPANDSP_RELEASE_DATE >= 20080725 /* for spandsp shaphots 0.0.6 and higher */ t30state = &t38.t30; t38state = &t38.t38_fe.t38; #else /* for spandsp releases 0.0.5 */ t30state = &t38.t30_state; t38state = &t38.t38; #endif /* Initialize terminal */ memset(&t38, 0, sizeof(t38)); if (t38_terminal_init(&t38, s->caller_mode, t38_tx_packet_handler, s->chan) == NULL) { ast_log(LOG_WARNING, "Unable to start T.38 termination.\n"); res = -1; goto disable_t38; } t38_set_max_datagram_size(t38state, s->t38parameters.max_ifp); if (s->t38parameters.fill_bit_removal) { t38_set_fill_bit_removal(t38state, TRUE); } if (s->t38parameters.transcoding_mmr) { t38_set_mmr_transcoding(t38state, TRUE); } if (s->t38parameters.transcoding_jbig) { t38_set_jbig_transcoding(t38state, TRUE); } /* Setup logging */ set_logging(&t38.logging); set_logging(&t30state->logging); set_logging(&t38state->logging); /* Configure terminal */ set_local_info(t30state, s); set_file(t30state, s); set_ecm(t30state, TRUE); t30_set_phase_e_handler(t30state, phase_e_handler, s); now = start = state_change = ast_tvnow(); while (!s->finished) { inf = NULL; if ((res = ast_waitfor(s->chan, 25)) < 0) { ast_debug(1, "Error waiting for a frame\n"); break; } last_frame = now; /* Watchdog */ now = ast_tvnow(); if (ast_tvdiff_sec(now, start) > WATCHDOG_TOTAL_TIMEOUT || ast_tvdiff_sec(now, state_change) > WATCHDOG_STATE_TIMEOUT) { ast_log(LOG_WARNING, "It looks like we hung. Aborting.\n"); res = -1; break; } t38_terminal_send_timeout(&t38, ast_tvdiff_us(now, last_frame) / (1000000 / 8000)); if (!res) { /* There was timeout waiting for a frame. Loop around and wait again */ continue; } /* There is a frame available. Get it */ res = 0; if (!(inf = ast_read(s->chan))) { ast_debug(1, "Channel hangup\n"); res = -1; break; } ast_debug(10, "frame %d/%d, len=%d\n", inf->frametype, inf->subclass.integer, inf->datalen); if (inf->frametype == AST_FRAME_MODEM && inf->subclass.integer == AST_MODEM_T38) { t38_core_rx_ifp_packet(t38state, inf->data.ptr, inf->datalen, inf->seqno); if (last_state != t30state->state) { state_change = ast_tvnow(); last_state = t30state->state; } } else if (inf->frametype == AST_FRAME_CONTROL && inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) { struct ast_control_t38_parameters *parameters = inf->data.ptr; if (parameters->request_response == AST_T38_TERMINATED) { ast_debug(1, "T38 down, finishing\n"); break; } } ast_frfree(inf); inf = NULL; } ast_debug(1, "Loop finished, res=%d\n", res); if (inf) ast_frfree(inf); t30_terminate(t30state); t38_terminal_release(&t38); disable_t38: /* if we are not the caller, it's our job to shut down the T.38 * session when the FAX transmisson is complete. */ if ((s->caller_mode == FALSE) && (ast_channel_get_t38_state(s->chan) == T38_STATE_NEGOTIATED)) { struct ast_control_t38_parameters t38_parameters = { .request_response = AST_T38_REQUEST_TERMINATE, }; if (ast_indicate_data(s->chan, AST_CONTROL_T38_PARAMETERS, &t38_parameters, sizeof(t38_parameters)) == 0) { /* wait up to five seconds for negotiation to complete */ unsigned int timeout = 5000; int ms; ast_debug(1, "Shutting down T.38 on %s\n", ast_channel_name(s->chan)); while (timeout > 0) { ms = ast_waitfor(s->chan, 1000); if (ms < 0) { ast_log(LOG_WARNING, "something bad happened while channel '%s' was polling.\n", ast_channel_name(s->chan)); return -1; } if (!ms) { /* nothing happened */ if (timeout > 0) { timeout -= 1000; continue; } else { ast_log(LOG_WARNING, "channel '%s' timed-out during the T.38 shutdown.\n", ast_channel_name(s->chan)); break; } } if (!(inf = ast_read(s->chan))) { return -1; } if ((inf->frametype == AST_FRAME_CONTROL) && (inf->subclass.integer == AST_CONTROL_T38_PARAMETERS) && (inf->datalen == sizeof(t38_parameters))) { struct ast_control_t38_parameters *parameters = inf->data.ptr; switch (parameters->request_response) { case AST_T38_TERMINATED: ast_debug(1, "Shut down T.38 on %s\n", ast_channel_name(s->chan)); break; case AST_T38_REFUSED: ast_log(LOG_WARNING, "channel '%s' refused to disable T.38\n", ast_channel_name(s->chan)); break; default: ast_log(LOG_ERROR, "channel '%s' failed to disable T.38\n", ast_channel_name(s->chan)); break; } ast_frfree(inf); break; } ast_frfree(inf); } } } return res; }