static int msp432_quit(struct flash_bank *bank)
{
struct target *target = bank->target;
struct msp432_bank *msp432_bank = bank->driver_priv;
struct msp432_algo_params algo_params;
int retval;
/* Initialize algorithm parameters to default values */
msp432_init_params(&algo_params);
/* Issue the exit command to the flash helper algorithm */
retval = msp432_exec_cmd(target, &algo_params, FLASH_EXIT);
if (ERROR_OK != retval)
return retval;
(void)msp432_wait_return_code(target);
/* Regardless of the return code, attempt to halt the target */
(void)target_halt(target);
/* Now confirm target halted and clean up from flash helper algorithm */
retval = target_wait_algorithm(target, 0, NULL, 0, NULL, 0, FLASH_TIMEOUT,
&msp432_bank->armv7m_info);
target_free_working_area(target, msp432_bank->working_area);
msp432_bank->working_area = NULL;
return retval;
}
static int get_lpc2000_part_id(struct flash_bank *bank, uint32_t *part_id)
{
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
uint32_t param_table[5] = {0};
uint32_t result_table[4];
struct working_area *iap_working_area;
int retval = lpc2000_iap_working_area_init(bank, &iap_working_area);
if (retval != ERROR_OK)
return retval;
/* The status seems to be bogus with the part ID command on some IAP
firmwares, so ignore it. */
lpc2000_iap_call(bank, iap_working_area, 54, param_table, result_table);
struct target *target = bank->target;
target_free_working_area(target, iap_working_area);
/* If the result is zero, the command probably didn't work out. */
if (result_table[0] == 0)
return LPC2000_INVALID_COMMAND;
*part_id = result_table[0];
return LPC2000_CMD_SUCCESS;
}
/** Checks whether a memory region is zeroed. */
int mips32_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *blank)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
struct mips32_algorithm mips32_info;
static const uint32_t erase_check_code[] = {
/* nbyte: */
0x80880000, /* lb $t0, ($a0) */
0x00C83024, /* and $a2, $a2, $t0 */
0x24A5FFFF, /* addiu $a1, $a1, -1 */
0x14A0FFFC, /* bne $a1, $zero, nbyte */
0x24840001, /* addiu $a0, $a0, 1 */
0x7000003F /* sdbbp */
};
/* make sure we have a working area */
if (target_alloc_working_area(target, sizeof(erase_check_code), &erase_check_algorithm) != ERROR_OK)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
/* convert erase check code into a buffer in target endianness */
uint8_t erase_check_code_8[sizeof(erase_check_code)];
target_buffer_set_u32_array(target, erase_check_code_8,
ARRAY_SIZE(erase_check_code), erase_check_code);
target_write_buffer(target, erase_check_algorithm->address, sizeof(erase_check_code), erase_check_code_8);
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
mips32_info.isa_mode = MIPS32_ISA_MIPS32;
init_reg_param(®_params[0], "r4", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r5", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r6", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
int retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
erase_check_algorithm->address,
erase_check_algorithm->address + (sizeof(erase_check_code) - 4),
10000, &mips32_info);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, erase_check_algorithm);
return retval;
}
/** Checks whether a memory region is zeroed. */
int armv7m_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t* blank)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
struct armv7m_algorithm armv7m_info;
int retval;
uint32_t i;
static const uint16_t erase_check_code[] =
{
/* loop: */
0xF810, 0x3B01, /* ldrb r3, [r0], #1 */
0xEA02, 0x0203, /* and r2, r2, r3 */
0x3901, /* subs r1, r1, #1 */
0xD1F9, /* bne loop */
0xBE00, /* bkpt #0 */
};
/* make sure we have a working area */
if (target_alloc_working_area(target, sizeof(erase_check_code), &erase_check_algorithm) != ERROR_OK)
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* convert flash writing code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(erase_check_code); i++)
target_write_u16(target, erase_check_algorithm->address + i*sizeof(uint16_t), erase_check_code[i]);
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
retval = target_run_algorithm(target, 0, NULL, 3, reg_params, erase_check_algorithm->address,
erase_check_algorithm->address + (sizeof(erase_check_code) - 2),
10000, &armv7m_info);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, erase_check_algorithm);
return retval;
}
/** Checks whether a memory region is zeroed. */
int xmc4xxx_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *blank)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
struct armv7m_algorithm armv7m_info;
int retval;
static const uint8_t erase_check_code[] = {
#include "../../../contrib/loaders/erase_check/armv7m_0_erase_check.inc"
};
/* make sure we have a working area */
if (target_alloc_working_area(target, sizeof(erase_check_code),
&erase_check_algorithm) != ERROR_OK)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
retval = target_write_buffer(target, erase_check_algorithm->address,
sizeof(erase_check_code), (uint8_t *)erase_check_code);
if (retval != ERROR_OK)
return retval;
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0x00);
retval = target_run_algorithm(target,
0,
NULL,
3,
reg_params,
erase_check_algorithm->address,
erase_check_algorithm->address + (sizeof(erase_check_code) - 2),
10000,
&armv7m_info);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, erase_check_algorithm);
return retval;
}
static int lpc2000_iap_blank_check(struct flash_bank *bank, int first, int last)
{
if ((first < 0) || (last >= bank->num_sectors))
return ERROR_FLASH_SECTOR_INVALID;
uint32_t param_table[5] = {0};
uint32_t result_table[4];
struct working_area *iap_working_area;
int retval = lpc2000_iap_working_area_init(bank, &iap_working_area);
if (retval != ERROR_OK)
return retval;
struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
if (lpc2000_info->variant == lpc4300)
param_table[2] = lpc2000_info->lpc4300_bank;
for (int i = first; i <= last && retval == ERROR_OK; i++) {
/* check single sector */
param_table[0] = param_table[1] = i;
int status_code = lpc2000_iap_call(bank, iap_working_area, 53, param_table, result_table);
switch (status_code) {
case ERROR_FLASH_OPERATION_FAILED:
retval = ERROR_FLASH_OPERATION_FAILED;
break;
case LPC2000_CMD_SUCCESS:
bank->sectors[i].is_erased = 1;
break;
case LPC2000_SECTOR_NOT_BLANK:
bank->sectors[i].is_erased = 0;
break;
case LPC2000_INVALID_SECTOR:
bank->sectors[i].is_erased = 0;
break;
case LPC2000_BUSY:
retval = ERROR_FLASH_BUSY;
break;
default:
LOG_ERROR("BUG: unknown LPC2000 status code %i", status_code);
exit(-1);
}
}
struct target *target = bank->target;
target_free_working_area(target, iap_working_area);
return retval;
}
/** Generates a CRC32 checksum of a memory region. */
int armv7m_checksum_memory(struct target *target,
target_addr_t address, uint32_t count, uint32_t *checksum)
{
struct working_area *crc_algorithm;
struct armv7m_algorithm armv7m_info;
struct reg_param reg_params[2];
int retval;
static const uint8_t cortex_m_crc_code[] = {
#include "../../contrib/loaders/checksum/armv7m_crc.inc"
};
retval = target_alloc_working_area(target, sizeof(cortex_m_crc_code), &crc_algorithm);
if (retval != ERROR_OK)
return retval;
retval = target_write_buffer(target, crc_algorithm->address,
sizeof(cortex_m_crc_code), (uint8_t *)cortex_m_crc_code);
if (retval != ERROR_OK)
goto cleanup;
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
int timeout = 20000 * (1 + (count / (1024 * 1024)));
retval = target_run_algorithm(target, 0, NULL, 2, reg_params, crc_algorithm->address,
crc_algorithm->address + (sizeof(cortex_m_crc_code) - 6),
timeout, &armv7m_info);
if (retval == ERROR_OK)
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
else
LOG_ERROR("error executing cortex_m crc algorithm");
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
cleanup:
target_free_working_area(target, crc_algorithm);
return retval;
}
static int lpc2000_iap_working_area_init(struct flash_bank *bank, struct working_area **iap_working_area)
{
struct target *target = bank->target;
struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
if (target_alloc_working_area(target, IAP_CODE_LEN + lpc2000_info->iap_max_stack, iap_working_area) != ERROR_OK) {
LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
return ERROR_FLASH_OPERATION_FAILED;
}
uint8_t jump_gate[8];
/* write IAP code to working area */
switch (lpc2000_info->variant) {
case lpc800:
case lpc1100:
case lpc1500:
case lpc1700:
case lpc4300:
case lpc54100:
case lpc_auto:
target_buffer_set_u32(target, jump_gate, ARMV4_5_T_BX(12));
target_buffer_set_u32(target, jump_gate + 4, ARMV5_T_BKPT(0));
break;
case lpc2000_v1:
case lpc2000_v2:
target_buffer_set_u32(target, jump_gate, ARMV4_5_BX(12));
target_buffer_set_u32(target, jump_gate + 4, ARMV4_5_B(0xfffffe, 0));
break;
default:
LOG_ERROR("BUG: unknown lpc2000_info->variant encountered");
exit(-1);
}
int retval = target_write_memory(target, (*iap_working_area)->address, 4, 2, jump_gate);
if (retval != ERROR_OK) {
LOG_ERROR("Write memory at address 0x%8.8" PRIx32 " failed (check work_area definition)",
(*iap_working_area)->address);
target_free_working_area(target, *iap_working_area);
}
return retval;
}
/* Un-initialize the ssp module and initialize the SPIFI module */
static int lpcspifi_set_hw_mode(struct flash_bank *bank)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
uint32_t ssp_base = lpcspifi_info->ssp_base;
struct armv7m_algorithm armv7m_info;
struct working_area *spifi_init_algorithm;
struct reg_param reg_params[1];
int retval = ERROR_OK;
LOG_DEBUG("Uninitializing LPC43xx SSP");
/* Turn off the SSP module */
retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000000);
if (retval != ERROR_OK)
return retval;
/* see contrib/loaders/flash/lpcspifi_init.S for src */
static const uint8_t spifi_init_code[] = {
0x4f, 0xea, 0x00, 0x08, 0xa1, 0xb0, 0x00, 0xaf,
0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
0x4f, 0xf0, 0xf3, 0x02, 0xc3, 0xf8, 0x8c, 0x21,
0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
0x4f, 0xf4, 0xc0, 0x42, 0xc4, 0xf2, 0x08, 0x02,
0x4f, 0xf4, 0xc0, 0x41, 0xc4, 0xf2, 0x08, 0x01,
0x4f, 0xf4, 0xc0, 0x40, 0xc4, 0xf2, 0x08, 0x00,
0x4f, 0xf0, 0xd3, 0x04, 0xc0, 0xf8, 0x9c, 0x41,
0x20, 0x46, 0xc1, 0xf8, 0x98, 0x01, 0x01, 0x46,
0xc2, 0xf8, 0x94, 0x11, 0xc3, 0xf8, 0x90, 0x11,
0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
0x4f, 0xf0, 0x13, 0x02, 0xc3, 0xf8, 0xa0, 0x21,
0x40, 0xf2, 0x18, 0x13, 0xc1, 0xf2, 0x40, 0x03,
0x1b, 0x68, 0x1c, 0x68, 0x40, 0xf2, 0xb4, 0x30,
0xc1, 0xf2, 0x00, 0x00, 0x4f, 0xf0, 0x03, 0x01,
0x4f, 0xf0, 0xc0, 0x02, 0x4f, 0xea, 0x08, 0x03,
0xa0, 0x47, 0x00, 0xf0, 0x00, 0xb8, 0x00, 0xbe
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
LOG_DEBUG("Allocating working area for SPIFI init algorithm");
/* Get memory for spifi initialization algorithm */
retval = target_alloc_working_area(target, sizeof(spifi_init_code),
&spifi_init_algorithm);
if (retval != ERROR_OK) {
LOG_ERROR("Insufficient working area to initialize SPIFI "\
"module. You must allocate at least %zdB of working "\
"area in order to use this driver.",
sizeof(spifi_init_code)
);
return retval;
}
LOG_DEBUG("Writing algorithm to working area at 0x%08" PRIx32,
spifi_init_algorithm->address);
/* Write algorithm to working area */
retval = target_write_buffer(target,
spifi_init_algorithm->address,
sizeof(spifi_init_code),
spifi_init_code
);
if (retval != ERROR_OK) {
target_free_working_area(target, spifi_init_algorithm);
return retval;
}
init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* spifi clk speed */
/* For now, the algorithm will set up the SPIFI module
* @ the IRC clock speed. In the future, it could be made
* a bit smarter to use other clock sources if the user has
* already configured them in order to speed up memory-
* mapped reads. */
buf_set_u32(reg_params[0].value, 0, 32, 12);
/* Run the algorithm */
LOG_DEBUG("Running SPIFI init algorithm");
retval = target_run_algorithm(target, 0 , NULL, 1, reg_params,
spifi_init_algorithm->address,
spifi_init_algorithm->address + sizeof(spifi_init_code) - 2,
1000, &armv7m_info);
if (retval != ERROR_OK)
LOG_ERROR("Error executing SPIFI init algorithm");
target_free_working_area(target, spifi_init_algorithm);
destroy_reg_param(®_params[0]);
return retval;
}
static int mrvlqspi_flash_write(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
int retval = ERROR_OK;
uint32_t page_size, fifo_size;
struct working_area *fifo;
struct reg_param reg_params[6];
struct armv7m_algorithm armv7m_info;
struct working_area *write_algorithm;
int sector;
LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
offset, count);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > mrvlqspi_info->dev->size_in_bytes) {
LOG_WARNING("Writes past end of flash. Extra data discarded.");
count = mrvlqspi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
for (sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
page_size = mrvlqspi_info->dev->pagesize;
/* See contrib/loaders/flash/mrvlqspi.S for src */
static const uint8_t mrvlqspi_flash_write_code[] = {
0x4f, 0xf0, 0x00, 0x0a, 0xa2, 0x44, 0x92, 0x45,
0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6b, 0xf8,
0x5f, 0xf0, 0x01, 0x08, 0xc5, 0xf8, 0x1c, 0x80,
0x5f, 0xf0, 0x06, 0x08, 0xc5, 0xf8, 0x10, 0x80,
0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0, 0x6b, 0xf8,
0x00, 0xf0, 0x7d, 0xf8, 0x5f, 0xf0, 0x31, 0x08,
0xc5, 0xf8, 0x1c, 0x80, 0x90, 0x46, 0xc5, 0xf8,
0x14, 0x80, 0x5f, 0xf0, 0x02, 0x08, 0xc5, 0xf8,
0x10, 0x80, 0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0,
0x5a, 0xf8, 0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1,
0x00, 0x0f, 0x00, 0xf0, 0x8b, 0x80, 0x47, 0x68,
0x47, 0x45, 0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8,
0x01, 0x9b, 0x00, 0xf0, 0x30, 0xf8, 0x8f, 0x42,
0x28, 0xbf, 0x00, 0xf1, 0x08, 0x07, 0x47, 0x60,
0x01, 0x3b, 0x00, 0x2b, 0x00, 0xf0, 0x05, 0x80,
0x02, 0xf1, 0x01, 0x02, 0x92, 0x45, 0x7f, 0xf4,
0xe4, 0xaf, 0x00, 0xf0, 0x50, 0xf8, 0xa2, 0x44,
0x00, 0xf0, 0x2d, 0xf8, 0x5f, 0xf0, 0x01, 0x08,
0xc5, 0xf8, 0x1c, 0x80, 0x5f, 0xf0, 0x00, 0x08,
0xc5, 0xf8, 0x20, 0x80, 0x5f, 0xf0, 0x05, 0x08,
0xc5, 0xf8, 0x10, 0x80, 0x5f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x29, 0xf8, 0x00, 0xf0, 0x13, 0xf8,
0x09, 0xf0, 0x01, 0x09, 0xb9, 0xf1, 0x00, 0x0f,
0xf8, 0xd1, 0x00, 0xf0, 0x34, 0xf8, 0x00, 0x2b,
0xa4, 0xd1, 0x00, 0xf0, 0x53, 0xb8, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0x08, 0x68, 0xfa, 0xd4,
0xc5, 0xf8, 0x08, 0x90, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0xc8, 0x68, 0xfa, 0xd4,
0xd5, 0xf8, 0x0c, 0x90, 0x70, 0x47, 0xd5, 0xf8,
0x04, 0x80, 0x48, 0xf4, 0x00, 0x78, 0xc5, 0xf8,
0x04, 0x80, 0xd5, 0xf8, 0x04, 0x80, 0x5f, 0xea,
0x88, 0x58, 0xfa, 0xd4, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x48, 0xf0, 0x01, 0x08, 0xc5, 0xf8,
0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea,
0x88, 0x78, 0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80,
0x69, 0xf3, 0x4d, 0x38, 0x48, 0xf4, 0x00, 0x48,
0xc5, 0xf8, 0x04, 0x80, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5,
0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea, 0x48, 0x68,
0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80, 0x48, 0xf4,
0x80, 0x48, 0xc5, 0xf8, 0x04, 0x80, 0xd5, 0xf8,
0x04, 0x80, 0x5f, 0xea, 0x08, 0x48, 0xfa, 0xd4,
0xd5, 0xf8, 0x00, 0x80, 0x28, 0xf0, 0x01, 0x08,
0xc5, 0xf8, 0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80,
0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5, 0x70, 0x47,
0x00, 0x20, 0x50, 0x60, 0x30, 0x46, 0x00, 0xbe
};
if (target_alloc_working_area(target, sizeof(mrvlqspi_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure"\
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(mrvlqspi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
retval = target_write_buffer(target, write_algorithm->address,
sizeof(mrvlqspi_flash_write_code),
mrvlqspi_flash_write_code);
if (retval != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return retval;
}
/* FIFO allocation */
fifo_size = target_get_working_area_avail(target);
if (fifo_size == 0) {
/* if we already allocated the writing code but failed to get fifo
* space, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_ERROR("Insufficient working area. Please allocate at least"\
" %zdB of working area to enable flash writes.",
sizeof(mrvlqspi_flash_write_code) + 1
);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
} else if (fifo_size < page_size)
LOG_WARNING("Working area size is limited; flash writes may be"\
" slow. Increase working area size to at least %zdB"\
" to reduce write times.",
(size_t)(sizeof(mrvlqspi_flash_write_code) + page_size)
);
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* page size */
init_reg_param(®_params[5], "r5", 32, PARAM_OUT); /* qspi base address */
buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
buf_set_u32(reg_params[2].value, 0, 32, offset);
buf_set_u32(reg_params[3].value, 0, 32, count);
buf_set_u32(reg_params[4].value, 0, 32, page_size);
buf_set_u32(reg_params[5].value, 0, 32, (uint32_t) mrvlqspi_info->reg_base);
retval = target_run_flash_async_algorithm(target, buffer, count, 1,
0, NULL,
6, reg_params,
fifo->address, fifo->size,
write_algorithm->address, 0,
&armv7m_info
);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash write algorithm");
target_free_working_area(target, fifo);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
destroy_reg_param(®_params[5]);
return retval;
}
/**
* Runs ARM code in the target to calculate a CRC32 checksum.
*
*/
int arm_checksum_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *checksum)
{
struct working_area *crc_algorithm;
struct arm_algorithm arm_algo;
struct arm *arm = target_to_arm(target);
struct reg_param reg_params[2];
int retval;
uint32_t i;
uint32_t exit_var = 0;
static const uint8_t arm_crc_code_le[] = {
#include "../../contrib/loaders/checksum/armv4_5_crc.inc"
};
assert(sizeof(arm_crc_code_le) % 4 == 0);
retval = target_alloc_working_area(target,
sizeof(arm_crc_code_le), &crc_algorithm);
if (retval != ERROR_OK)
return retval;
/* convert code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(arm_crc_code_le) / 4; i++) {
retval = target_write_u32(target,
crc_algorithm->address + i * sizeof(uint32_t),
le_to_h_u32(&arm_crc_code_le[i * 4]));
if (retval != ERROR_OK)
goto cleanup;
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
/* 20 second timeout/megabyte */
int timeout = 20000 * (1 + (count / (1024 * 1024)));
/* armv4 must exit using a hardware breakpoint */
if (arm->is_armv4)
exit_var = crc_algorithm->address + sizeof(arm_crc_code_le) - 8;
retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
crc_algorithm->address,
exit_var,
timeout, &arm_algo);
if (retval == ERROR_OK)
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
else
LOG_ERROR("error executing ARM crc algorithm");
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
cleanup:
target_free_working_area(target, crc_algorithm);
return retval;
}
static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 16384;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[4];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
/* see contib/loaders/flash/stm32x.s for src */
static const uint8_t stm32x_flash_write_code[] = {
/* #define STM32_FLASH_CR_OFFSET 0x10 */
/* #define STM32_FLASH_SR_OFFSET 0x0C */
/* write: */
0x08, 0x4c, /* ldr r4, STM32_FLASH_BASE */
0x1c, 0x44, /* add r4, r3 */
/* write_half_word: */
0x01, 0x23, /* movs r3, #0x01 */
0x23, 0x61, /* str r3, [r4, #STM32_FLASH_CR_OFFSET] */
0x30, 0xf8, 0x02, 0x3b, /* ldrh r3, [r0], #0x02 */
0x21, 0xf8, 0x02, 0x3b, /* strh r3, [r1], #0x02 */
/* busy: */
0xe3, 0x68, /* ldr r3, [r4, #STM32_FLASH_SR_OFFSET] */
0x13, 0xf0, 0x01, 0x0f, /* tst r3, #0x01 */
0xfb, 0xd0, /* beq busy */
0x13, 0xf0, 0x14, 0x0f, /* tst r3, #0x14 */
0x01, 0xd1, /* bne exit */
0x01, 0x3a, /* subs r2, r2, #0x01 */
0xf0, 0xd1, /* bne write_half_word */
/* exit: */
0x00, 0xbe, /* bkpt #0x00 */
0x00, 0x20, 0x02, 0x40, /* STM32_FLASH_BASE: .word 0x40022000 */
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
&stm32x_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address,
sizeof(stm32x_flash_write_code),
(uint8_t*)stm32x_flash_write_code)) != ERROR_OK)
return retval;
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
if (buffer_size <= 256)
{
/* if we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
if (stm32x_info->write_algorithm)
target_free_working_area(target, stm32x_info->write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT);
while (count > 0)
{
uint32_t thisrun_count = (count > (buffer_size / 2)) ?
(buffer_size / 2) : count;
if ((retval = target_write_buffer(target, source->address,
thisrun_count * 2, buffer)) != ERROR_OK)
break;
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
buf_set_u32(reg_params[3].value, 0, 32, stm32x_info->register_offset);
if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params,
stm32x_info->write_algorithm->address,
0,
10000, &armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error executing stm32x flash write algorithm");
break;
}
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR)
{
LOG_ERROR("flash memory not erased before writing");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR);
retval = ERROR_FAIL;
break;
}
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR)
{
LOG_ERROR("flash memory write protected");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR);
retval = ERROR_FAIL;
break;
}
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, stm32x_info->write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
return retval;
}
static int str7x_write_block(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 32768;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[6];
struct arm_algorithm arm_algo;
int retval = ERROR_OK;
/* see contib/loaders/flash/str7x.s for src */
static const uint32_t str7x_flash_write_code[] = {
/* write: */
0xe3a04201, /* mov r4, #0x10000000 */
0xe5824000, /* str r4, [r2, #0x0] */
0xe5821010, /* str r1, [r2, #0x10] */
0xe4904004, /* ldr r4, [r0], #4 */
0xe5824008, /* str r4, [r2, #0x8] */
0xe4904004, /* ldr r4, [r0], #4 */
0xe582400c, /* str r4, [r2, #0xc] */
0xe3a04209, /* mov r4, #0x90000000 */
0xe5824000, /* str r4, [r2, #0x0] */
/* busy: */
0xe5924000, /* ldr r4, [r2, #0x0] */
0xe1140005, /* tst r4, r5 */
0x1afffffc, /* bne busy */
0xe5924014, /* ldr r4, [r2, #0x14] */
0xe31400ff, /* tst r4, #0xff */
0x03140c01, /* tsteq r4, #0x100 */
0x1a000002, /* bne exit */
0xe2811008, /* add r1, r1, #0x8 */
0xe2533001, /* subs r3, r3, #1 */
0x1affffec, /* bne write */
/* exit: */
0xeafffffe, /* b exit */
};
/* flash write code */
if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code),
&write_algorithm) != ERROR_OK) {
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
uint8_t code[sizeof(str7x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(str7x_flash_write_code),
str7x_flash_write_code);
target_write_buffer(target, write_algorithm->address, sizeof(code), code);
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
if (buffer_size <= 256) {
/* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
init_reg_param(®_params[4], "r4", 32, PARAM_IN);
init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
while (count > 0) {
uint32_t thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count;
target_write_buffer(target, source->address, thisrun_count * 8, buffer);
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, str7x_get_flash_adr(bank, FLASH_CR0));
buf_set_u32(reg_params[3].value, 0, 32, thisrun_count);
buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits);
retval = target_run_algorithm(target, 0, NULL, 6, reg_params,
write_algorithm->address,
write_algorithm->address + (sizeof(str7x_flash_write_code) - 4),
10000, &arm_algo);
if (retval != ERROR_OK)
break;
if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) {
retval = str7x_result(bank);
break;
}
buffer += thisrun_count * 8;
address += thisrun_count * 8;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
destroy_reg_param(®_params[5]);
return retval;
}
static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct fm3_flash_bank *fm3_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 2048; /* 8192 for MB9Bxx6! */
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[6];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
uint32_t u32FlashType;
uint32_t u32FlashSeqAddress1;
uint32_t u32FlashSeqAddress2;
u32FlashType = (uint32_t) fm3_info->flashtype;
if (u32FlashType == fm3_flash_type1)
{
u32FlashSeqAddress1 = 0x00001550;
u32FlashSeqAddress2 = 0x00000AA8;
}
else if (u32FlashType == fm3_flash_type2)
{
u32FlashSeqAddress1 = 0x00000AA8;
u32FlashSeqAddress2 = 0x00000554;
}
else
{
LOG_ERROR("Flash/Device type unknown!");
return ERROR_FLASH_OPERATION_FAILED;
}
/* RAMCODE used for fm3 Flash programming: */
/* R0 keeps source start address (u32Source) */
/* R1 keeps target start address (u32Target) */
/* R2 keeps number of halfwords to write (u32Count) */
/* R3 keeps Flash Sequence address 1 (u32FlashSeq1) */
/* R4 keeps Flash Sequence address 2 (u32FlashSeq2) */
/* R5 returns result value (u32FlashResult) */
const uint8_t fm3_flash_write_code[] = {
/* fm3_FLASH_IF->FASZ &= 0xFFFD; */
0x5F, 0xF0, 0x80, 0x45, /* MOVS.W R5, #(fm3_FLASH_IF->FASZ) */
0x2D, 0x68, /* LDR R5, [R5] */
0x4F, 0xF6, 0xFD, 0x76, /* MOVW R6, #0xFFFD */
0x35, 0x40, /* ANDS R5, R5, R6 */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x35, 0x60, /* STR R5, [R6] */
/* fm3_FLASH_IF->FASZ |= 1; */
0x5F, 0xF0, 0x80, 0x45, /* MOVS.W R5, #(fm3_FLASH_IF->FASZ) */
0x2D, 0x68, /* LDR R5, [R3] */
0x55, 0xF0, 0x01, 0x05, /* ORRS.W R5, R5, #1 */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x35, 0x60, /* STR R5, [R6] */
/* u32DummyRead = fm3_FLASH_IF->FASZ; */
0x28, 0x4D, /* LDR.N R5, ??u32DummyRead */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x36, 0x68, /* LDR R6, [R6] */
0x2E, 0x60, /* STR R6, [R5] */
/* u32FlashResult = FLASH_WRITE_NO_RESULT */
0x26, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x00, 0x26, /* MOVS R6, #0 */
0x2E, 0x60, /* STR R6, [R5] */
/* while ((u32Count > 0 ) */
/* && (u32FlashResult */
/* == FLASH_WRITE_NO_RESULT)) */
0x01, 0x2A, /* L0: CMP R2, #1 */
0x2C, 0xDB, /* BLT.N L1 */
0x24, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x2D, 0x68, /* LDR R5, [R5] */
0x00, 0x2D, /* CMP R5, #0 */
0x28, 0xD1, /* BNE.N L1 */
/* *u32FlashSeq1 = FLASH_WRITE_1; */
0xAA, 0x25, /* MOVS R5, #0xAA */
0x1D, 0x60, /* STR R5, [R3] */
/* *u32FlashSeq2 = FLASH_WRITE_2; */
0x55, 0x25, /* MOVS R5, #0x55 */
0x25, 0x60, /* STR R5, [R4] */
/* *u32FlashSeq1 = FLASH_WRITE_3; */
0xA0, 0x25, /* MOVS R5, #0xA0 */
0x1D, 0x60, /* STRH R5, [R3] */
/* *(volatile uint16_t*)u32Target */
/* = *(volatile uint16_t*)u32Source; */
0x05, 0x88, /* LDRH R5, [R0] */
0x0D, 0x80, /* STRH R5, [R1] */
/* while (u32FlashResult */
/* == FLASH_WRITE_NO_RESTULT) */
0x1E, 0x4D, /* L2: LDR.N R5, ??u32FlashResult */
0x2D, 0x68, /* LDR R5, [R5] */
0x00, 0x2D, /* CMP R5, #0 */
0x11, 0xD1, /* BNE.N L3 */
/* if ((*(volatile uint16_t*)u32Target */
/* & FLASH_DQ5) == FLASH_DQ5) */
0x0D, 0x88, /* LDRH R5, [R1] */
0xAD, 0x06, /* LSLS R5, R5, #0x1A */
0x02, 0xD5, /* BPL.N L4 */
/* u32FlashResult = FLASH_WRITE_TIMEOUT */
0x1A, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x02, 0x26, /* MOVS R6, #2 */
0x2E, 0x60, /* STR R6, [R5] */
/* if ((*(volatile uint16_t *)u32Target */
/* & FLASH_DQ7) */
/* == (*(volatile uint16_t*)u32Source */
/* & FLASH_DQ7)) */
0x0D, 0x88, /* L4: LDRH R5, [R1] */
0x15, 0xF0, 0x80, 0x05, /* ANDS.W R5, R5, #0x80 */
0x06, 0x88, /* LDRH R6, [R0] */
0x16, 0xF0, 0x80, 0x06, /* ANDS.W R6, R6, #0x80 */
0xB5, 0x42, /* CMP R5, R6 */
0xED, 0xD1, /* BNE.N L2 */
/* u32FlashResult = FLASH_WRITE_OKAY */
0x15, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x01, 0x26, /* MOVS R6, #1 */
0x2E, 0x60, /* STR R6, [R5] */
0xE9, 0xE7, /* B.N L2 */
/* if (u32FlashResult */
/* != FLASH_WRITE_TIMEOUT) */
0x13, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x2D, 0x68, /* LDR R5, [R5] */
0x02, 0x2D, /* CMP R5, #2 */
0x02, 0xD0, /* BEQ.N L5 */
/* u32FlashResult = FLASH_WRITE_NO_RESULT */
0x11, 0x4D, /* LDR.N R5, ??u32FlashResult */
0x00, 0x26, /* MOVS R6, #0 */
0x2E, 0x60, /* STR R6, [R5] */
/* u32Count--; */
0x52, 0x1E, /* L5: SUBS R2, R2, #1 */
/* u32Source += 2; */
0x80, 0x1C, /* ADDS R0, R0, #2 */
/* u32Target += 2; */
0x89, 0x1C, /* ADDS R1, R1, #2 */
0xD0, 0xE7, /* B.N L0 */
/* fm3_FLASH_IF->FASZ &= 0xFFFE; */
0x5F, 0xF0, 0x80, 0x45, /* L1: MOVS.W R5, #(fm3_FLASH_IF->FASZ) */
0x2D, 0x68, /* LDR R5, [R5] */
0x4F, 0xF6, 0xFE, 0x76, /* MOVW R6, #0xFFFE */
0x35, 0x40, /* ANDS R5, R5, R6 */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x35, 0x60, /* STR R5, [R6] */
/* fm3_FLASH_IF->FASZ |= 2; */
0x5F, 0xF0, 0x80, 0x45, /* MOVS.W R5, #(fm3_FLASH_IF->FASZ) */
0x2D, 0x68, /* LDR R5, [R5] */
0x55, 0xF0, 0x02, 0x05, /* ORRS.W R5, R5, #2 */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x35, 0x60, /* STR R5, [R6] */
/* u32DummyRead = fm3_FLASH_IF->FASZ; */
0x04, 0x4D, /* LDR.N R5, ??u32DummyRead */
0x5F, 0xF0, 0x80, 0x46, /* MOVS.W R6, #(fm3_FLASH_IF->FASZ) */
0x36, 0x68, /* LDR R6, [R6] */
0x2E, 0x60, /* STR R6, [R5] */
/* copy u32FlashResult to R3 for return */
/* value */
0xDF, 0xF8, 0x08, 0x50, /* LDR.W R5, ??u32FlashResult */
0x2D, 0x68, /* LDR R5, [R5] */
/* Breakpoint here */
0x00, 0xBE, /* BKPT #0 */
/* The following address pointers assume, that the code is running from */
/* address 0x1FFF8008. These address pointers will be patched, if a */
/* different start address in RAM is used (e.g. for Flash type 2)! */
0x00, 0x80, 0xFF, 0x1F, /* u32DummyRead address in RAM (0x1FFF8000) */
0x04, 0x80, 0xFF, 0x1F /* u32FlashResult address in RAM (0x1FFF8004) */
};
LOG_INFO("Fujitsu MB9B500: FLASH Write ...");
/* disable HW watchdog */
retval = target_write_u32(target, 0x40011C00, 0x1ACCE551);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, 0x40011C00, 0xE5331AAE);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, 0x40011008, 0x00000000);
if (retval != ERROR_OK)
return retval;
count = count / 2; /* number bytes -> number halfwords */
/* check code alignment */
if (offset & 0x1)
{
LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
/* allocate working area with flash programming code */
if (target_alloc_working_area(target, sizeof(fm3_flash_write_code),
&fm3_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
retval = target_write_buffer(target, fm3_info->write_algorithm->address,
sizeof(fm3_flash_write_code), fm3_flash_write_code);
if (retval != ERROR_OK)
return retval;
/* memory buffer */
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
if (buffer_size <= 256)
{
/* free working area, if write algorithm already allocated */
if (fm3_info->write_algorithm)
{
target_free_working_area(target, fm3_info->write_algorithm);
}
LOG_WARNING("No large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* source start address */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* target start address */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* number of halfwords to program */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* Flash Sequence address 1 */
init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* Flash Sequence address 1 */
init_reg_param(®_params[5], "r5", 32, PARAM_IN); /* result */
/* write code buffer and use Flash programming code within fm3 */
/* Set breakpoint to 0 with time-out of 1000 ms */
while (count > 0)
{
uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
retval = target_write_buffer(target, fm3_info->write_algorithm->address,
8, fm3_flash_write_code);
if (retval != ERROR_OK)
break;
/* Patching 'local variable address' for different RAM addresses */
if (fm3_info->write_algorithm->address != 0x1FFF8008)
{
/* Algorithm: u32DummyRead: */
retval = target_write_u32(target, (fm3_info->write_algorithm->address)
+ sizeof(fm3_flash_write_code) - 8,
(fm3_info->write_algorithm->address) - 8);
if (retval != ERROR_OK)
break;
/* Algorithm: u32FlashResult: */
retval = target_write_u32(target, (fm3_info->write_algorithm->address)
+ sizeof(fm3_flash_write_code) - 4, (fm3_info->write_algorithm->address) - 4);
if (retval != ERROR_OK)
break;
}
retval = target_write_buffer(target, source->address, thisrun_count * 2,
buffer);
if (retval != ERROR_OK)
break;
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
buf_set_u32(reg_params[3].value, 0, 32, u32FlashSeqAddress1);
buf_set_u32(reg_params[4].value, 0, 32, u32FlashSeqAddress2);
retval = target_run_algorithm(target, 0, NULL, 6, reg_params,
fm3_info->write_algorithm->address, 0, 1000, &armv7m_info);
if (retval != ERROR_OK)
{
LOG_ERROR("Error executing fm3 Flash programming algorithm");
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
if (buf_get_u32(reg_params[5].value, 0, 32) != ERROR_OK)
{
LOG_ERROR("Fujitsu MB9[A/B]FXXX: Flash programming ERROR (Timeout) \
-> Reg R3: %x", buf_get_u32(reg_params[5].value, 0, 32));
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t dst_min_alignment;
uint32_t bytes_remaining = count;
uint32_t bytes_written = 0;
int first_sector = 0;
int last_sector = 0;
uint32_t param_table[5];
uint32_t result_table[4];
int status_code;
int i;
struct working_area *download_area;
int retval = ERROR_OK;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > bank->size)
return ERROR_FLASH_DST_OUT_OF_BANK;
dst_min_alignment = lpc2000_info->cmd51_dst_boundary;
if (offset % dst_min_alignment) {
LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32,
offset,
dst_min_alignment);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
for (i = 0; i < bank->num_sectors; i++) {
if (offset >= bank->sectors[i].offset)
first_sector = i;
if (offset + DIV_ROUND_UP(count, dst_min_alignment)
* dst_min_alignment > bank->sectors[i].offset)
last_sector = i;
}
LOG_DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
/* check if exception vectors should be flashed */
if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum) {
uint32_t checksum = 0;
for (i = 0; i < 8; i++) {
LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32, i * 4,
buf_get_u32(buffer + (i * 4), 0, 32));
if (i != lpc2000_info->checksum_vector)
checksum += buf_get_u32(buffer + (i * 4), 0, 32);
}
checksum = 0 - checksum;
LOG_DEBUG("checksum: 0x%8.8" PRIx32, checksum);
uint32_t original_value = buf_get_u32(buffer +
(lpc2000_info->checksum_vector * 4), 0, 32);
if (original_value != checksum) {
LOG_WARNING("Verification will fail since checksum in image (0x%8.8" PRIx32 ") "
"to be written to flash is different from calculated vector "
"checksum (0x%8.8" PRIx32 ").", original_value, checksum);
LOG_WARNING("To remove this warning modify build tools on developer PC "
"to inject correct LPC vector checksum.");
}
buf_set_u32(buffer + (lpc2000_info->checksum_vector * 4), 0, 32, checksum);
}
/* allocate a working area */
if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer,
&download_area) != ERROR_OK) {
LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
return ERROR_FLASH_OPERATION_FAILED;
}
while (bytes_remaining > 0) {
uint32_t thisrun_bytes;
if (bytes_remaining >= lpc2000_info->cmd51_max_buffer)
thisrun_bytes = lpc2000_info->cmd51_max_buffer;
else if (bytes_remaining >= 1024)
thisrun_bytes = 1024;
else if ((bytes_remaining >= 512) || (!lpc2000_info->cmd51_can_256b))
thisrun_bytes = 512;
else
thisrun_bytes = 256;
/* Prepare sectors */
param_table[0] = first_sector;
param_table[1] = last_sector;
status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
switch (status_code) {
case ERROR_FLASH_OPERATION_FAILED:
retval = ERROR_FLASH_OPERATION_FAILED;
break;
case LPC2000_CMD_SUCCESS:
break;
case LPC2000_INVALID_SECTOR:
retval = ERROR_FLASH_SECTOR_INVALID;
break;
default:
LOG_WARNING("lpc2000 prepare sectors returned %i", status_code);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
/* Exit if error occured */
if (retval != ERROR_OK)
break;
if (bytes_remaining >= thisrun_bytes) {
retval = target_write_buffer(bank->target, download_area->address,
thisrun_bytes, buffer + bytes_written);
if (retval != ERROR_OK) {
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
} else {
uint8_t *last_buffer = malloc(thisrun_bytes);
memcpy(last_buffer, buffer + bytes_written, bytes_remaining);
memset(last_buffer + bytes_remaining, 0xff, thisrun_bytes -
bytes_remaining);
target_write_buffer(bank->target,
download_area->address,
thisrun_bytes,
last_buffer);
free(last_buffer);
}
LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32,
thisrun_bytes,
bank->base + offset + bytes_written);
/* Write data */
param_table[0] = bank->base + offset + bytes_written;
param_table[1] = download_area->address;
param_table[2] = thisrun_bytes;
param_table[3] = lpc2000_info->cclk;
status_code = lpc2000_iap_call(bank, 51, param_table, result_table);
switch (status_code) {
case ERROR_FLASH_OPERATION_FAILED:
retval = ERROR_FLASH_OPERATION_FAILED;
break;
case LPC2000_CMD_SUCCESS:
break;
case LPC2000_INVALID_SECTOR:
retval = ERROR_FLASH_SECTOR_INVALID;
break;
default:
LOG_WARNING("lpc2000 returned %i", status_code);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
/* Exit if error occured */
if (retval != ERROR_OK)
break;
if (bytes_remaining > thisrun_bytes)
bytes_remaining -= thisrun_bytes;
else
bytes_remaining = 0;
bytes_written += thisrun_bytes;
}
target_free_working_area(target, download_area);
return retval;
}
static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
uint32_t buffer_size = 16384;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[3];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
/* see contib/loaders/flash/stm32lx.S for src */
static const uint8_t stm32lx_flash_write_code[] = {
/* write_word: */
0x00, 0x23, /* movs r3, #0 */
0x04, 0xe0, /* b test_done */
/* write_word: */
0x51, 0xf8, 0x04, 0xcb, /* ldr ip, [r1], #4 */
0x40, 0xf8, 0x04, 0xcb, /* str ip, [r0], #4 */
0x01, 0x33, /* adds r3, #1 */
/* test_done: */
0x93, 0x42, /* cmp r3, r2 */
0xf8, 0xd3, /* bcc write_word */
0x00, 0xbe, /* bkpt 0 */
};
/* Check if there is an even number of half pages (128bytes) */
if (count % 128) {
LOG_ERROR("there should be an even number "
"of half pages = 128 bytes (count = %" PRIi32 " bytes)", count);
return ERROR_FAIL;
}
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32lx_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_DEBUG("no working area for block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
/* Write the flashing code */
retval = target_write_buffer(target,
write_algorithm->address,
sizeof(stm32lx_flash_write_code),
(uint8_t *)stm32lx_flash_write_code);
if (retval != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return retval;
}
/* Allocate half pages memory */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
if (buffer_size > 1024)
buffer_size -= 1024;
else
buffer_size /= 2;
if (buffer_size <= 256) {
/* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
/* Enable half-page write */
retval = stm32lx_enable_write_half_page(bank);
if (retval != ERROR_OK) {
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
return retval;
}
struct armv7m_common *armv7m = target_to_armv7m(target);
if (armv7m == NULL) {
/* something is very wrong if armv7m is NULL */
LOG_ERROR("unable to get armv7m target");
return retval;
}
/* save any DEMCR flags and configure target to catch any Hard Faults */
uint32_t demcr_save = armv7m->demcr;
armv7m->demcr = VC_HARDERR;
/* Loop while there are bytes to write */
while (count > 0) {
uint32_t this_count;
this_count = (count > buffer_size) ? buffer_size : count;
/* Write the next half pages */
retval = target_write_buffer(target, source->address, this_count, buffer);
if (retval != ERROR_OK)
break;
/* 4: Store useful information in the registers */
/* the destination address of the copy (R0) */
buf_set_u32(reg_params[0].value, 0, 32, address);
/* The source address of the copy (R1) */
buf_set_u32(reg_params[1].value, 0, 32, source->address);
/* The length of the copy (R2) */
buf_set_u32(reg_params[2].value, 0, 32, this_count / 4);
/* 5: Execute the bunch of code */
retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params)
/ sizeof(*reg_params), reg_params,
write_algorithm->address, 0, 10000, &armv7m_info);
if (retval != ERROR_OK)
break;
/* check for Hard Fault */
if (armv7m->exception_number == 3)
break;
/* 6: Wait while busy */
retval = stm32lx_wait_until_bsy_clear(bank);
if (retval != ERROR_OK)
break;
buffer += this_count;
address += this_count;
count -= this_count;
}
/* restore previous flags */
armv7m->demcr = demcr_save;
if (armv7m->exception_number == 3) {
/* the stm32l15x devices seem to have an issue when blank.
* if a ram loader is executed on a blank device it will
* Hard Fault, this issue does not happen for a already programmed device.
* A related issue is described in the stm32l151xx errata (Doc ID 17721 Rev 6 - 2.1.3).
* The workaround of handling the Hard Fault exception does work, but makes the
* loader more complicated, as a compromise we manually write the pages, programming time
* is reduced by 50% using this slower method.
*/
LOG_WARNING("couldn't use loader, falling back to page memory writes");
while (count > 0) {
uint32_t this_count;
this_count = (count > 128) ? 128 : count;
/* Write the next half pages */
retval = target_write_buffer(target, address, this_count, buffer);
if (retval != ERROR_OK)
break;
/* Wait while busy */
retval = stm32lx_wait_until_bsy_clear(bank);
if (retval != ERROR_OK)
break;
buffer += this_count;
address += this_count;
count -= this_count;
}
}
if (retval == ERROR_OK)
retval = stm32lx_lock_program_memory(bank);
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
return retval;
}
static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 16384;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[4];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
uint8_t stm32x_flash_write_code[] = {
/* write: */
0xDF, 0xF8, 0x24, 0x40, /* ldr r4, STM32_FLASH_CR */
0x09, 0x4D, /* ldr r5, STM32_FLASH_SR */
0x4F, 0xF0, 0x01, 0x03, /* mov r3, #1 */
0x23, 0x60, /* str r3, [r4, #0] */
0x30, 0xF8, 0x02, 0x3B, /* ldrh r3, [r0], #2 */
0x21, 0xF8, 0x02, 0x3B, /* strh r3, [r1], #2 */
/* busy: */
0x2B, 0x68, /* ldr r3, [r5, #0] */
0x13, 0xF0, 0x01, 0x0F, /* tst r3, #0x01 */
0xFB, 0xD0, /* beq busy */
0x13, 0xF0, 0x14, 0x0F, /* tst r3, #0x14 */
0x01, 0xD1, /* bne exit */
0x01, 0x3A, /* subs r2, r2, #1 */
0xED, 0xD1, /* bne write */
/* exit: */
0xFE, 0xE7, /* b exit */
0x10, 0x20, 0x02, 0x40, /* STM32_FLASH_CR: .word 0x40022010 */
0x0C, 0x20, 0x02, 0x40 /* STM32_FLASH_SR: .word 0x4002200C */
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code)) != ERROR_OK)
return retval;
/* memory buffer */
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
if (buffer_size <= 256)
{
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (stm32x_info->write_algorithm)
target_free_working_area(target, stm32x_info->write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN);
while (count > 0)
{
uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
if ((retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer)) != ERROR_OK)
break;
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \
stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error executing stm32x flash write algorithm");
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR)
{
LOG_ERROR("flash memory not erased before writing");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR)
{
LOG_ERROR("flash memory write protected");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, stm32x_info->write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
return retval;
}
/** Checks whether a memory region is erased. */
int armv7m_blank_check_memory(struct target *target,
target_addr_t address, uint32_t count, uint32_t *blank, uint8_t erased_value)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
struct armv7m_algorithm armv7m_info;
const uint8_t *code;
uint32_t code_size;
int retval;
static const uint8_t erase_check_code[] = {
#include "../../contrib/loaders/erase_check/armv7m_erase_check.inc"
};
static const uint8_t zero_erase_check_code[] = {
#include "../../contrib/loaders/erase_check/armv7m_0_erase_check.inc"
};
switch (erased_value) {
case 0x00:
code = zero_erase_check_code;
code_size = sizeof(zero_erase_check_code);
break;
case 0xff:
default:
code = erase_check_code;
code_size = sizeof(erase_check_code);
}
/* make sure we have a working area */
if (target_alloc_working_area(target, code_size,
&erase_check_algorithm) != ERROR_OK)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
retval = target_write_buffer(target, erase_check_algorithm->address,
code_size, code);
if (retval != ERROR_OK)
goto cleanup;
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, erased_value);
retval = target_run_algorithm(target,
0,
NULL,
3,
reg_params,
erase_check_algorithm->address,
erase_check_algorithm->address + (code_size - 2),
10000,
&armv7m_info);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
cleanup:
target_free_working_area(target, erase_check_algorithm);
return retval;
}
/**
* Runs ARM code in the target to check whether a memory block holds
* all ones. NOR flash which has been erased, and thus may be written,
* holds all ones.
*
*/
int arm_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *blank)
{
struct working_area *check_algorithm;
struct reg_param reg_params[3];
struct arm_algorithm arm_algo;
struct arm *arm = target_to_arm(target);
int retval;
uint32_t i;
uint32_t exit_var = 0;
static const uint8_t check_code_le[] = {
#include "../../contrib/loaders/erase_check/armv4_5_erase_check.inc"
};
assert(sizeof(check_code_le) % 4 == 0);
/* make sure we have a working area */
retval = target_alloc_working_area(target,
sizeof(check_code_le), &check_algorithm);
if (retval != ERROR_OK)
return retval;
/* convert code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(check_code_le) / 4; i++) {
retval = target_write_u32(target,
check_algorithm->address
+ i * sizeof(uint32_t),
le_to_h_u32(&check_code_le[i * 4]));
if (retval != ERROR_OK)
goto cleanup;
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
/* armv4 must exit using a hardware breakpoint */
if (arm->is_armv4)
exit_var = check_algorithm->address + sizeof(check_code_le) - 4;
retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
check_algorithm->address,
exit_var,
10000, &arm_algo);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
cleanup:
target_free_working_area(target, check_algorithm);
return retval;
}
static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
struct reg_param reg_params[4];
struct armv7m_algorithm armv7m_info;
struct working_area *erase_algorithm;
int retval = ERROR_OK;
int sector;
LOG_DEBUG("erase from sector %d to sector %d", first, last);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Flash sector invalid");
return ERROR_FLASH_SECTOR_INVALID;
}
if (!(lpcspifi_info->probed)) {
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
}
for (sector = first; sector <= last; sector++) {
if (bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
/* If we're erasing the entire chip and the flash supports
* it, use a bulk erase instead of going sector-by-sector. */
if (first == 0 && last == (bank->num_sectors - 1)
&& lpcspifi_info->dev->chip_erase_cmd != lpcspifi_info->dev->erase_cmd) {
LOG_DEBUG("Chip supports the bulk erase command."\
" Will use bulk erase instead of sector-by-sector erase.");
retval = lpcspifi_bulk_erase(bank);
if (retval == ERROR_OK) {
retval = lpcspifi_set_hw_mode(bank);
return retval;
} else
LOG_WARNING("Bulk flash erase failed. Falling back to sector-by-sector erase.");
}
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
/* see contrib/loaders/flash/lpcspifi_erase.S for src */
static const uint8_t lpcspifi_flash_erase_code[] = {
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
0x00, 0xf0, 0x52, 0xf8, 0x4f, 0xf0, 0x06, 0x09,
0x00, 0xf0, 0x3b, 0xf8, 0x00, 0xf0, 0x48, 0xf8,
0x00, 0xf0, 0x4a, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
0x00, 0xf0, 0x33, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x2f, 0xf8, 0x00, 0xf0, 0x3c, 0xf8,
0x19, 0xf0, 0x02, 0x0f, 0x00, 0xf0, 0x45, 0x80,
0x00, 0xf0, 0x3a, 0xf8, 0x4f, 0xea, 0x02, 0x09,
0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xea, 0x10, 0x49,
0x00, 0xf0, 0x1f, 0xf8, 0x4f, 0xea, 0x10, 0x29,
0x00, 0xf0, 0x1b, 0xf8, 0x4f, 0xea, 0x00, 0x09,
0x00, 0xf0, 0x17, 0xf8, 0x00, 0xf0, 0x24, 0xf8,
0x00, 0xf0, 0x26, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
0x00, 0xf0, 0x0f, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x0b, 0xf8, 0x00, 0xf0, 0x18, 0xf8,
0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4, 0xf0, 0xaf,
0x01, 0x39, 0xf9, 0xb1, 0x18, 0x44, 0xff, 0xf7,
0xbf, 0xbf, 0x4f, 0xf4, 0x40, 0x5a, 0xc4, 0xf2,
0x08, 0x0a, 0xca, 0xf8, 0x08, 0x90, 0xda, 0xf8,
0x0c, 0x90, 0x19, 0xf0, 0x10, 0x0f, 0x7f, 0xf4,
0xfa, 0xaf, 0xda, 0xf8, 0x08, 0x90, 0x70, 0x47,
0x4f, 0xf0, 0xff, 0x08, 0x00, 0xf0, 0x02, 0xb8,
0x4f, 0xf0, 0x00, 0x08, 0x4f, 0xf4, 0x80, 0x4a,
0xc4, 0xf2, 0x0f, 0x0a, 0xca, 0xf8, 0xab, 0x80,
0x70, 0x47, 0x00, 0x20, 0x00, 0xbe, 0xff, 0xff
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
/* Get memory for spifi initialization algorithm */
retval = target_alloc_working_area(target, sizeof(lpcspifi_flash_erase_code),
&erase_algorithm);
if (retval != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure a working"\
" area of at least %zdB in order to erase SPIFI flash.",
sizeof(lpcspifi_flash_erase_code));
return retval;
}
/* Write algorithm to working area */
retval = target_write_buffer(target, erase_algorithm->address,
sizeof(lpcspifi_flash_erase_code), lpcspifi_flash_erase_code);
if (retval != ERROR_OK) {
target_free_working_area(target, erase_algorithm);
return retval;
}
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* Start address */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* Sector count */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* Erase command */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* Sector size */
buf_set_u32(reg_params[0].value, 0, 32, bank->sectors[first].offset);
buf_set_u32(reg_params[1].value, 0, 32, last - first + 1);
buf_set_u32(reg_params[2].value, 0, 32, lpcspifi_info->dev->erase_cmd);
buf_set_u32(reg_params[3].value, 0, 32, bank->sectors[first].size);
/* Run the algorithm */
retval = target_run_algorithm(target, 0 , NULL, 4, reg_params,
erase_algorithm->address,
erase_algorithm->address + sizeof(lpcspifi_flash_erase_code) - 4,
3000*(last - first + 1), &armv7m_info);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash erase algorithm");
target_free_working_area(target, erase_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
retval = lpcspifi_set_hw_mode(bank);
return retval;
}
static int lpcspifi_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
uint32_t page_size, fifo_size;
struct working_area *fifo;
struct reg_param reg_params[5];
struct armv7m_algorithm armv7m_info;
struct working_area *write_algorithm;
int sector;
int retval = ERROR_OK;
LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
offset, count);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > lpcspifi_info->dev->size_in_bytes) {
LOG_WARNING("Writes past end of flash. Extra data discarded.");
count = lpcspifi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
for (sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
page_size = lpcspifi_info->dev->pagesize;
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
/* see contrib/loaders/flash/lpcspifi_write.S for src */
static const uint8_t lpcspifi_flash_write_code[] = {
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
0x4f, 0xf0, 0x00, 0x0b, 0xa3, 0x44, 0x93, 0x45,
0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6a, 0xf8,
0x4f, 0xf0, 0x06, 0x09, 0x00, 0xf0, 0x53, 0xf8,
0x00, 0xf0, 0x60, 0xf8, 0x00, 0xf0, 0x62, 0xf8,
0x4f, 0xf0, 0x05, 0x09, 0x00, 0xf0, 0x4b, 0xf8,
0x4f, 0xf0, 0x00, 0x09, 0x00, 0xf0, 0x47, 0xf8,
0x00, 0xf0, 0x54, 0xf8, 0x19, 0xf0, 0x02, 0x0f,
0x00, 0xf0, 0x5d, 0x80, 0x00, 0xf0, 0x52, 0xf8,
0x4f, 0xf0, 0x02, 0x09, 0x00, 0xf0, 0x3b, 0xf8,
0x4f, 0xea, 0x12, 0x49, 0x00, 0xf0, 0x37, 0xf8,
0x4f, 0xea, 0x12, 0x29, 0x00, 0xf0, 0x33, 0xf8,
0x4f, 0xea, 0x02, 0x09, 0x00, 0xf0, 0x2f, 0xf8,
0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1, 0x00, 0x0f,
0x00, 0xf0, 0x47, 0x80, 0x47, 0x68, 0x47, 0x45,
0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8, 0x01, 0x9b,
0x00, 0xf0, 0x21, 0xf8, 0x8f, 0x42, 0x28, 0xbf,
0x00, 0xf1, 0x08, 0x07, 0x47, 0x60, 0x01, 0x3b,
0xbb, 0xb3, 0x02, 0xf1, 0x01, 0x02, 0x93, 0x45,
0x7f, 0xf4, 0xe6, 0xaf, 0x00, 0xf0, 0x22, 0xf8,
0xa3, 0x44, 0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xf0,
0x05, 0x09, 0x00, 0xf0, 0x0c, 0xf8, 0x4f, 0xf0,
0x00, 0x09, 0x00, 0xf0, 0x08, 0xf8, 0x00, 0xf0,
0x15, 0xf8, 0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4,
0xf0, 0xaf, 0xff, 0xf7, 0xa7, 0xbf, 0x4f, 0xf4,
0x40, 0x5a, 0xc4, 0xf2, 0x08, 0x0a, 0xca, 0xf8,
0x08, 0x90, 0xda, 0xf8, 0x0c, 0x90, 0x19, 0xf0,
0x10, 0x0f, 0x7f, 0xf4, 0xfa, 0xaf, 0xda, 0xf8,
0x08, 0x90, 0x70, 0x47, 0x4f, 0xf0, 0xff, 0x08,
0x00, 0xf0, 0x02, 0xb8, 0x4f, 0xf0, 0x00, 0x08,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0xca, 0xf8, 0xab, 0x80, 0x70, 0x47, 0x00, 0x20,
0x50, 0x60, 0x30, 0x46, 0x00, 0xbe, 0xff, 0xff
};
if (target_alloc_working_area(target, sizeof(lpcspifi_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure"\
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(lpcspifi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
retval = target_write_buffer(target, write_algorithm->address,
sizeof(lpcspifi_flash_write_code),
lpcspifi_flash_write_code);
if (retval != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return retval;
}
/* FIFO allocation */
fifo_size = target_get_working_area_avail(target);
if (fifo_size == 0) {
/* if we already allocated the writing code but failed to get fifo
* space, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_ERROR("Insufficient working area. Please allocate at least"\
" %zdB of working area to enable flash writes.",
sizeof(lpcspifi_flash_write_code) + 1
);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
} else if (fifo_size < page_size)
LOG_WARNING("Working area size is limited; flash writes may be"\
" slow. Increase working area size to at least %zdB"\
" to reduce write times.",
(size_t)(sizeof(lpcspifi_flash_write_code) + page_size)
);
else if (fifo_size > 0x2000) /* Beyond this point, we start to get diminishing returns */
fifo_size = 0x2000;
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* page size */
buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
buf_set_u32(reg_params[2].value, 0, 32, offset);
buf_set_u32(reg_params[3].value, 0, 32, count);
buf_set_u32(reg_params[4].value, 0, 32, page_size);
retval = target_run_flash_async_algorithm(target, buffer, count, 1,
0, NULL,
5, reg_params,
fifo->address, fifo->size,
write_algorithm->address, 0,
&armv7m_info
);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash write algorithm");
target_free_working_area(target, fifo);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
/* Switch to HW mode before return to prompt */
retval = lpcspifi_set_hw_mode(bank);
return retval;
}
/**
* Runs ARM code in the target to calculate a CRC32 checksum.
*
*/
int arm_checksum_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *checksum)
{
struct working_area *crc_algorithm;
struct arm_algorithm arm_algo;
struct arm *arm = target_to_arm(target);
struct reg_param reg_params[2];
int retval;
uint32_t i;
uint32_t exit_var = 0;
/* see contrib/loaders/checksum/armv4_5_crc.s for src */
static const uint32_t arm_crc_code[] = {
0xE1A02000, /* mov r2, r0 */
0xE3E00000, /* mov r0, #0xffffffff */
0xE1A03001, /* mov r3, r1 */
0xE3A04000, /* mov r4, #0 */
0xEA00000B, /* b ncomp */
/* nbyte: */
0xE7D21004, /* ldrb r1, [r2, r4] */
0xE59F7030, /* ldr r7, CRC32XOR */
0xE0200C01, /* eor r0, r0, r1, asl 24 */
0xE3A05000, /* mov r5, #0 */
/* loop: */
0xE3500000, /* cmp r0, #0 */
0xE1A06080, /* mov r6, r0, asl #1 */
0xE2855001, /* add r5, r5, #1 */
0xE1A00006, /* mov r0, r6 */
0xB0260007, /* eorlt r0, r6, r7 */
0xE3550008, /* cmp r5, #8 */
0x1AFFFFF8, /* bne loop */
0xE2844001, /* add r4, r4, #1 */
/* ncomp: */
0xE1540003, /* cmp r4, r3 */
0x1AFFFFF1, /* bne nbyte */
/* end: */
0xe1200070, /* bkpt #0 */
/* CRC32XOR: */
0x04C11DB7 /* .word 0x04C11DB7 */
};
retval = target_alloc_working_area(target,
sizeof(arm_crc_code), &crc_algorithm);
if (retval != ERROR_OK)
return retval;
/* convert code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(arm_crc_code); i++) {
retval = target_write_u32(target,
crc_algorithm->address + i * sizeof(uint32_t),
arm_crc_code[i]);
if (retval != ERROR_OK)
return retval;
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
/* 20 second timeout/megabyte */
int timeout = 20000 * (1 + (count / (1024 * 1024)));
/* armv4 must exit using a hardware breakpoint */
if (arm->is_armv4)
exit_var = crc_algorithm->address + sizeof(arm_crc_code) - 8;
retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
crc_algorithm->address,
exit_var,
timeout, &arm_algo);
if (retval != ERROR_OK) {
LOG_ERROR("error executing ARM crc algorithm");
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
target_free_working_area(target, crc_algorithm);
return retval;
}
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
target_free_working_area(target, crc_algorithm);
return ERROR_OK;
}
/** Checks whether a memory region is zeroed. */
int xmc4xxx_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *blank)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
struct armv7m_algorithm armv7m_info;
int retval;
/* see contrib/loaders/erase_check/armv7m_0_erase_check.s for src */
static const uint8_t erase_check_code[] = {
/* loop: */
0x03, 0x78, /* ldrb r3, [r0] */
0x01, 0x30, /* adds r0, #1 */
0x1A, 0x43, /* orrs r2, r2, r3 */
0x01, 0x39, /* subs r1, r1, #1 */
0xFA, 0xD1, /* bne loop */
0x00, 0xBE /* bkpt #0 */
};
/* make sure we have a working area */
if (target_alloc_working_area(target, sizeof(erase_check_code),
&erase_check_algorithm) != ERROR_OK)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
retval = target_write_buffer(target, erase_check_algorithm->address,
sizeof(erase_check_code), (uint8_t *)erase_check_code);
if (retval != ERROR_OK)
return retval;
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0x00);
retval = target_run_algorithm(target,
0,
NULL,
3,
reg_params,
erase_check_algorithm->address,
erase_check_algorithm->address + (sizeof(erase_check_code) - 2),
10000,
&armv7m_info);
if (retval == ERROR_OK)
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, erase_check_algorithm);
return retval;
}
/**
* Runs ARM code in the target to check whether a memory block holds
* all ones. NOR flash which has been erased, and thus may be written,
* holds all ones.
*
*/
int arm_blank_check_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *blank)
{
struct working_area *check_algorithm;
struct reg_param reg_params[3];
struct arm_algorithm arm_algo;
struct arm *arm = target_to_arm(target);
int retval;
uint32_t i;
uint32_t exit_var = 0;
/* see contrib/loaders/erase_check/armv4_5_erase_check.s for src */
static const uint32_t check_code[] = {
/* loop: */
0xe4d03001, /* ldrb r3, [r0], #1 */
0xe0022003, /* and r2, r2, r3 */
0xe2511001, /* subs r1, r1, #1 */
0x1afffffb, /* bne loop */
/* end: */
0xe1200070, /* bkpt #0 */
};
/* make sure we have a working area */
retval = target_alloc_working_area(target,
sizeof(check_code), &check_algorithm);
if (retval != ERROR_OK)
return retval;
/* convert code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(check_code); i++) {
retval = target_write_u32(target,
check_algorithm->address
+ i * sizeof(uint32_t),
check_code[i]);
if (retval != ERROR_OK)
return retval;
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
/* armv4 must exit using a hardware breakpoint */
if (arm->is_armv4)
exit_var = check_algorithm->address + sizeof(check_code) - 4;
retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
check_algorithm->address,
exit_var,
10000, &arm_algo);
if (retval != ERROR_OK) {
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, check_algorithm);
return retval;
}
*blank = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
target_free_working_area(target, check_algorithm);
return ERROR_OK;
}
/** Generates a CRC32 checksum of a memory region. */
int armv7m_checksum_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t* checksum)
{
struct working_area *crc_algorithm;
struct armv7m_algorithm armv7m_info;
struct reg_param reg_params[2];
int retval;
/* see contib/loaders/checksum/armv7m_crc.s for src */
static const uint16_t cortex_m3_crc_code[] = {
0x4602, /* mov r2, r0 */
0xF04F, 0x30FF, /* mov r0, #0xffffffff */
0x460B, /* mov r3, r1 */
0xF04F, 0x0400, /* mov r4, #0 */
0xE013, /* b ncomp */
/* nbyte: */
0x5D11, /* ldrb r1, [r2, r4] */
0xF8DF, 0x7028, /* ldr r7, CRC32XOR */
0xEA80, 0x6001, /* eor r0, r0, r1, asl #24 */
0xF04F, 0x0500, /* mov r5, #0 */
/* loop: */
0x2800, /* cmp r0, #0 */
0xEA4F, 0x0640, /* mov r6, r0, asl #1 */
0xF105, 0x0501, /* add r5, r5, #1 */
0x4630, /* mov r0, r6 */
0xBFB8, /* it lt */
0xEA86, 0x0007, /* eor r0, r6, r7 */
0x2D08, /* cmp r5, #8 */
0xD1F4, /* bne loop */
0xF104, 0x0401, /* add r4, r4, #1 */
/* ncomp: */
0x429C, /* cmp r4, r3 */
0xD1E9, /* bne nbyte */
0xBE00, /* bkpt #0 */
0x1DB7, 0x04C1 /* CRC32XOR: .word 0x04C11DB7 */
};
uint32_t i;
retval = target_alloc_working_area(target, sizeof(cortex_m3_crc_code), &crc_algorithm);
if (retval != ERROR_OK)
return retval;
/* convert flash writing code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(cortex_m3_crc_code); i++) {
retval = target_write_u16(target, crc_algorithm->address + i*sizeof(uint16_t), cortex_m3_crc_code[i]);
if (retval != ERROR_OK)
goto cleanup;
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
int timeout = 20000 * (1 + (count / (1024 * 1024)));
retval = target_run_algorithm(target, 0, NULL, 2, reg_params, crc_algorithm->address,
crc_algorithm->address + (sizeof(cortex_m3_crc_code) - 6),
timeout, &armv7m_info);
if (retval == ERROR_OK)
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
else
LOG_ERROR("error executing cortex_m3 crc algorithm");
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
cleanup:
target_free_working_area(target, crc_algorithm);
return retval;
}
/** Generates a CRC32 checksum of a memory region. */
int armv7m_checksum_memory(struct target *target,
uint32_t address, uint32_t count, uint32_t *checksum)
{
struct working_area *crc_algorithm;
struct armv7m_algorithm armv7m_info;
struct reg_param reg_params[2];
int retval;
/* see contrib/loaders/checksum/armv7m_crc.s for src */
static const uint8_t cortex_m3_crc_code[] = {
/* main: */
0x02, 0x46, /* mov r2, r0 */
0x00, 0x20, /* movs r0, #0 */
0xC0, 0x43, /* mvns r0, r0 */
0x0A, 0x4E, /* ldr r6, CRC32XOR */
0x0B, 0x46, /* mov r3, r1 */
0x00, 0x24, /* movs r4, #0 */
0x0D, 0xE0, /* b ncomp */
/* nbyte: */
0x11, 0x5D, /* ldrb r1, [r2, r4] */
0x09, 0x06, /* lsls r1, r1, #24 */
0x48, 0x40, /* eors r0, r0, r1 */
0x00, 0x25, /* movs r5, #0 */
/* loop: */
0x00, 0x28, /* cmp r0, #0 */
0x02, 0xDA, /* bge notset */
0x40, 0x00, /* lsls r0, r0, #1 */
0x70, 0x40, /* eors r0, r0, r6 */
0x00, 0xE0, /* b cont */
/* notset: */
0x40, 0x00, /* lsls r0, r0, #1 */
/* cont: */
0x01, 0x35, /* adds r5, r5, #1 */
0x08, 0x2D, /* cmp r5, #8 */
0xF6, 0xD1, /* bne loop */
0x01, 0x34, /* adds r4, r4, #1 */
/* ncomp: */
0x9C, 0x42, /* cmp r4, r3 */
0xEF, 0xD1, /* bne nbyte */
0x00, 0xBE, /* bkpt #0 */
0xB7, 0x1D, 0xC1, 0x04 /* CRC32XOR: .word 0x04c11db7 */
};
retval = target_alloc_working_area(target, sizeof(cortex_m3_crc_code), &crc_algorithm);
if (retval != ERROR_OK)
return retval;
retval = target_write_buffer(target, crc_algorithm->address,
sizeof(cortex_m3_crc_code), (uint8_t *)cortex_m3_crc_code);
if (retval != ERROR_OK)
goto cleanup;
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
int timeout = 20000 * (1 + (count / (1024 * 1024)));
retval = target_run_algorithm(target, 0, NULL, 2, reg_params, crc_algorithm->address,
crc_algorithm->address + (sizeof(cortex_m3_crc_code) - 6),
timeout, &armv7m_info);
if (retval == ERROR_OK)
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
else
LOG_ERROR("error executing cortex_m crc algorithm");
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
cleanup:
target_free_working_area(target, crc_algorithm);
return retval;
}
/* If this fn returns ERROR_TARGET_RESOURCE_NOT_AVAILABLE, then the caller can fall
* back to another mechanism that does not require onboard RAM
*
* Caller should not check for other return values specifically
*/
static int aduc702x_write_block(struct flash_bank *bank,
const uint8_t *buffer,
uint32_t offset,
uint32_t count)
{
struct target *target = bank->target;
uint32_t buffer_size = 7000;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[6];
struct arm_algorithm arm_algo;
int retval = ERROR_OK;
if (((count%2) != 0) || ((offset%2) != 0)) {
LOG_ERROR("write block must be multiple of two bytes in offset & length");
return ERROR_FAIL;
}
/* parameters:
r0 - address of source data (absolute)
r1 - number of halfwords to be copied
r2 - start address in flash (offset from beginning of flash memory)
r3 - exit code
r4 - base address of flash controller (0xFFFFF800)
registers:
r5 - scratch
r6 - set to 2, used to write flash command
*/
static const uint32_t aduc702x_flash_write_code[] = {
/* <_start>: */
0xe3a05008, /* mov r5, #8 ; 0x8 */
0xe5845004, /* str r5, [r4, #4] */
0xe3a06002, /* mov r6, #2 ; 0x2 */
/* <next>: */
0xe1c421b0, /* strh r2, [r4, #16] */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xe1c450bc, /* strh r5, [r4, #12] */
0xe5c46008, /* strb r6, [r4, #8] */
/* <wait_complete>: */
0xe1d430b0, /* ldrh r3, [r4] */
0xe3130004, /* tst r3, #4 ; 0x4 */
0x1afffffc, /* bne 1001c <wait_complete> */
0xe2822002, /* add r2, r2, #2 ; 0x2 */
0xe2511001, /* subs r1, r1, #1 ; 0x1 */
0x0a000001, /* beq 1003c <done> */
0xe3130001, /* tst r3, #1 ; 0x1 */
0x1afffff3, /* bne 1000c <next> */
/* <done>: */
0xeafffffe /* b 1003c <done> */
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(aduc702x_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
uint8_t code[sizeof(aduc702x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(aduc702x_flash_write_code),
aduc702x_flash_write_code);
retval = target_write_buffer(target, write_algorithm->address, sizeof(code), code);
if (retval != ERROR_OK)
return retval;
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
if (buffer_size <= 256) {
/* we already allocated the writing code, but failed to get a buffer,
*free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN);
init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
while (count > 0) {
uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
retval = target_write_buffer(target, source->address, thisrun_count, buffer);
if (retval != ERROR_OK)
break;
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, thisrun_count/2);
buf_set_u32(reg_params[2].value, 0, 32, address);
buf_set_u32(reg_params[4].value, 0, 32, 0xFFFFF800);
retval = target_run_algorithm(target, 0, NULL, 5,
reg_params, write_algorithm->address,
write_algorithm->address +
sizeof(aduc702x_flash_write_code) - 4,
10000, &arm_algo);
if (retval != ERROR_OK) {
LOG_ERROR("error executing aduc702x flash write algorithm");
break;
}
if ((buf_get_u32(reg_params[3].value, 0, 32) & 1) != 1) {
/* FIX!!!! what does this mean??? replace w/sensible error message */
LOG_ERROR("aduc702x detected error writing flash");
retval = ERROR_FAIL;
break;
}
buffer += thisrun_count;
address += thisrun_count;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
return retval;
}
int mips32_checksum_memory(struct target *target, uint32_t address,
uint32_t count, uint32_t* checksum)
{
struct working_area *crc_algorithm;
struct reg_param reg_params[2];
struct mips32_algorithm mips32_info;
int retval;
uint32_t i;
/* see contib/loaders/checksum/mips32.s for src */
static const uint32_t mips_crc_code[] =
{
0x248C0000, /* addiu $t4, $a0, 0 */
0x24AA0000, /* addiu $t2, $a1, 0 */
0x2404FFFF, /* addiu $a0, $zero, 0xffffffff */
0x10000010, /* beq $zero, $zero, ncomp */
0x240B0000, /* addiu $t3, $zero, 0 */
/* nbyte: */
0x81850000, /* lb $a1, ($t4) */
0x218C0001, /* addi $t4, $t4, 1 */
0x00052E00, /* sll $a1, $a1, 24 */
0x3C0204C1, /* lui $v0, 0x04c1 */
0x00852026, /* xor $a0, $a0, $a1 */
0x34471DB7, /* ori $a3, $v0, 0x1db7 */
0x00003021, /* addu $a2, $zero, $zero */
/* loop: */
0x00044040, /* sll $t0, $a0, 1 */
0x24C60001, /* addiu $a2, $a2, 1 */
0x28840000, /* slti $a0, $a0, 0 */
0x01074826, /* xor $t1, $t0, $a3 */
0x0124400B, /* movn $t0, $t1, $a0 */
0x28C30008, /* slti $v1, $a2, 8 */
0x1460FFF9, /* bne $v1, $zero, loop */
0x01002021, /* addu $a0, $t0, $zero */
/* ncomp: */
0x154BFFF0, /* bne $t2, $t3, nbyte */
0x256B0001, /* addiu $t3, $t3, 1 */
0x7000003F, /* sdbbp */
};
/* make sure we have a working area */
if (target_alloc_working_area(target, sizeof(mips_crc_code), &crc_algorithm) != ERROR_OK)
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* convert flash writing code into a buffer in target endianness */
for (i = 0; i < ARRAY_SIZE(mips_crc_code); i++)
target_write_u32(target, crc_algorithm->address + i*sizeof(uint32_t), mips_crc_code[i]);
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
mips32_info.isa_mode = MIPS32_ISA_MIPS32;
init_reg_param(®_params[0], "a0", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "a1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
int timeout = 20000 * (1 + (count / (1024 * 1024)));
if ((retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
crc_algorithm->address, crc_algorithm->address + (sizeof(mips_crc_code)-4), timeout,
&mips32_info)) != ERROR_OK)
{
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
target_free_working_area(target, crc_algorithm);
return 0;
}
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
target_free_working_area(target, crc_algorithm);
return ERROR_OK;
}
static int str9x_write_block(struct flash_bank *bank,
const uint8_t *buffer, uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
uint32_t buffer_size = 32768;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[4];
struct arm_algorithm arm_algo;
int retval = ERROR_OK;
/* see contib/loaders/flash/str9x.s for src */
static const uint32_t str9x_flash_write_code[] = {
/* write: */
0xe3c14003, /* bic r4, r1, #3 */
0xe3a03040, /* mov r3, #0x40 */
0xe1c430b0, /* strh r3, [r4, #0] */
0xe0d030b2, /* ldrh r3, [r0], #2 */
0xe0c130b2, /* strh r3, [r1], #2 */
0xe3a03070, /* mov r3, #0x70 */
0xe1c430b0, /* strh r3, [r4, #0] */
/* busy: */
0xe5d43000, /* ldrb r3, [r4, #0] */
0xe3130080, /* tst r3, #0x80 */
0x0afffffc, /* beq busy */
0xe3a05050, /* mov r5, #0x50 */
0xe1c450b0, /* strh r5, [r4, #0] */
0xe3a050ff, /* mov r5, #0xFF */
0xe1c450b0, /* strh r5, [r4, #0] */
0xe3130012, /* tst r3, #0x12 */
0x1a000001, /* bne exit */
0xe2522001, /* subs r2, r2, #1 */
0x1affffed, /* bne write */
/* exit: */
0xe1200070, /* bkpt #0 */
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(str9x_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
uint8_t code[sizeof(str9x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(str9x_flash_write_code),
str9x_flash_write_code);
target_write_buffer(target, write_algorithm->address, sizeof(code), code);
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
if (buffer_size <= 256) {
/* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN);
while (count > 0) {
uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
target_write_buffer(target, source->address, thisrun_count * 2, buffer);
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
retval = target_run_algorithm(target, 0, NULL, 4, reg_params,
write_algorithm->address,
0, 10000, &arm_algo);
if (retval != ERROR_OK) {
LOG_ERROR("error executing str9x flash write algorithm");
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80) {
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
return retval;
}
static int msp432_init(struct flash_bank *bank)
{
struct target *target = bank->target;
struct msp432_bank *msp432_bank = bank->driver_priv;
struct msp432_algo_params algo_params;
struct reg_param reg_params[1];
const uint8_t *loader_code;
uint32_t loader_size;
uint32_t algo_entry_addr;
int retval;
/* Make sure we've probed the flash to get the device and size */
retval = msp432_auto_probe(bank);
if (ERROR_OK != retval)
return retval;
/* Choose appropriate flash helper algorithm */
switch (msp432_bank->device_type) {
case MSP432P401X:
case MSP432P401X_DEPR:
case MSP432P401X_GUESS:
default:
loader_code = msp432p401x_algo;
loader_size = sizeof(msp432p401x_algo);
algo_entry_addr = P4_ALGO_ENTRY_ADDR;
break;
case MSP432P411X:
case MSP432P411X_GUESS:
loader_code = msp432p411x_algo;
loader_size = sizeof(msp432p411x_algo);
algo_entry_addr = P4_ALGO_ENTRY_ADDR;
break;
case MSP432E401Y:
case MSP432E411Y:
case MSP432E4X_GUESS:
loader_code = msp432e4x_algo;
loader_size = sizeof(msp432e4x_algo);
algo_entry_addr = E4_ALGO_ENTRY_ADDR;
break;
}
/* Issue warnings if this is a device we may not be able to flash */
if (MSP432P401X_GUESS == msp432_bank->device_type ||
MSP432P411X_GUESS == msp432_bank->device_type) {
/* Explicit device type check failed. Report this. */
LOG_WARNING(
"msp432: Unrecognized MSP432P4 Device ID and Hardware "
"Rev (%04X, %02X)", msp432_bank->device_id,
msp432_bank->hardware_rev);
} else if (MSP432P401X_DEPR == msp432_bank->device_type) {
LOG_WARNING(
"msp432: MSP432P401x pre-production device (deprecated "
"silicon)\n" SUPPORT_MESSAGE);
} else if (MSP432E4X_GUESS == msp432_bank->device_type) {
/* Explicit device type check failed. Report this. */
LOG_WARNING(
"msp432: Unrecognized MSP432E4 DID0 and DID1 values "
"(%08X, %08X)", msp432_bank->device_id,
msp432_bank->hardware_rev);
}
/* Check for working area to use for flash helper algorithm */
if (NULL != msp432_bank->working_area)
target_free_working_area(target, msp432_bank->working_area);
retval = target_alloc_working_area(target, ALGO_WORKING_SIZE,
&msp432_bank->working_area);
if (ERROR_OK != retval)
return retval;
/* Confirm the defined working address is the area we need to use */
if (ALGO_BASE_ADDR != msp432_bank->working_area->address)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
/* Write flash helper algorithm into target memory */
retval = target_write_buffer(target, ALGO_BASE_ADDR, loader_size,
loader_code);
if (ERROR_OK != retval)
return retval;
/* Initialize the ARMv7 specific info to run the algorithm */
msp432_bank->armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
msp432_bank->armv7m_info.core_mode = ARM_MODE_THREAD;
/* Initialize algorithm parameters to default values */
msp432_init_params(&algo_params);
/* Write out parameters to target memory */
retval = target_write_buffer(target, ALGO_PARAMS_BASE_ADDR,
sizeof(algo_params), (uint8_t *)&algo_params);
if (ERROR_OK != retval)
return retval;
/* Initialize stack pointer for flash helper algorithm */
init_reg_param(®_params[0], "sp", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, ALGO_STACK_POINTER_ADDR);
/* Begin executing the flash helper algorithm */
retval = target_start_algorithm(target, 0, 0, 1, reg_params,
algo_entry_addr, 0, &msp432_bank->armv7m_info);
destroy_reg_param(®_params[0]);
if (ERROR_OK != retval) {
LOG_ERROR("msp432: Failed to start flash helper algorithm");
return retval;
}
/*
* At this point, the algorithm is running on the target and
* ready to receive commands and data to flash the target
*/
/* Issue the init command to the flash helper algorithm */
retval = msp432_exec_cmd(target, &algo_params, FLASH_INIT);
if (ERROR_OK != retval)
return retval;
retval = msp432_wait_return_code(target);
return retval;
}
