void loop(void) {
for(uint8_t rotation=0; rotation<4; rotation++) {
tft.setRotation(rotation);
testText();
delay(2000);
}
}
static void
test()
{
int i;
for ( i = 0; i < myCommands[COMMAND_TEST].qtyflags; i++)
{
if ( !strcmp(flags,myCommands[COMMAND_TEST].flags[i]))
{
switch(i)
{
case 0: testCommands();
break;
case 1: testText();
break;
default: ;
}
return;
}
}
kprintf("Test: Invalid Options!\n");
}
void CharIterTest::TestCoverage(){
UnicodeString testText("Now is the time for all good men to come to the aid of their country.");
UnicodeString testText2("\\ud800\\udc01deadbeef");
testText2 = testText2.unescape();
SCharacterIterator* test = new SCharacterIterator(testText);
if(test->firstPostInc()!= 0x004E){
errln("Failed: firstPostInc() failed");
}
if(test->getIndex()!=1){
errln("Failed: getIndex().");
}
if(test->getLength()!=testText.length()){
errln("Failed: getLength()");
}
test->setToStart();
if(test->getIndex()!=0){
errln("Failed: setToStart().");
}
test->setToEnd();
if(test->getIndex()!=testText.length()){
errln("Failed: setToEnd().");
}
if(test->startIndex() != 0){
errln("Failed: startIndex()");
}
test->setText(testText2);
if(test->first32PostInc()!= testText2.char32At(0)){
errln("Failed: first32PostInc() failed");
}
delete test;
}
void benchMark() {
Serial.print(F("Text "));
Serial.println(testRandomRects());
delay(500);
Serial.println(F("Benchmark Time (microseconds)"));
Serial.print(F("Screen fill "));
Serial.println(testFillScreen());
delay(500);
Serial.print(F("Text "));
Serial.println(testText());
delay(3000);
Serial.print(F("Lines "));
Serial.println(testLines(ILI9341_CYAN));
delay(500);
Serial.print(F("Horiz/Vert Lines "));
Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));
delay(500);
Serial.print(F("Rectangles (outline) "));
Serial.println(testRects(ILI9341_GREEN));
delay(500);
Serial.print(F("Rectangles (filled) "));
Serial.println(testFilledRects(ILI9341_YELLOW, ILI9341_MAGENTA));
delay(500);
Serial.print(F("Circles (filled) "));
Serial.println(testFilledCircles(10, ILI9341_MAGENTA));
Serial.print(F("Circles (outline) "));
Serial.println(testCircles(10, ILI9341_WHITE));
delay(500);
Serial.print(F("Triangles (outline) "));
Serial.println(testTriangles());
delay(500);
Serial.print(F("Triangles (filled) "));
Serial.println(testFilledTriangles());
delay(500);
Serial.print(F("Rounded rects (outline) "));
Serial.println(testRoundRects());
delay(500);
Serial.print(F("Rounded rects (filled) "));
Serial.println(testFilledRoundRects());
delay(500);
Serial.println(F("Done!"));
}
static gboolean
is_row_visible (GtkTreeModel * model, GtkTreeIter * iter, gpointer vdata)
{
const char * text;
tr_torrent * tor;
struct filter_data * data = vdata;
GObject * o = G_OBJECT (data->filter_model);
gtk_tree_model_get (model, iter, MC_TORRENT, &tor, -1);
text = (const char*) g_object_get_qdata (o, TEXT_KEY);
return (tor != NULL) && test_torrent_activity (tor, data->active_activity_type)
&& testText (tor, text);
}
int main(int argc, char **argv) {
atexit(exitHelper);
KApplication app(argc, argv, "testeqparser", false, false);
// Base cases
test("0", 1.0, 0.0);
test("1.0", 2.0, 1.0);
// Basics
test("x", -1.0, -1.0);
test("-x", -1.0, 1.0);
test("x^2", -1.0, 1.0);
test(" x^2", -1.0, 1.0);
test(" x^2 ", -1.0, 1.0);
test("x^2 ", -1.0, 1.0);
test("x^2 + x^2", -1.0, 2.0);
test("y", 0.0, NOPOINT);
test("foo()", 0.0, NOPOINT);
test("foo(1.0, 2.0, 3.0)", 0.0, NOPOINT);
// Order of evaluation and parser issues
test("-x^2", 2.0, -4.0);
test("(-x)^2", 2.0, 4.0);
test("-(x^2)", 2.0, -4.0);
test("(-x^2)", 2.0, -4.0);
test("x*x+5", 2.0, 9.0);
test("5+x*x", 2.0, 9.0);
test("5*4/2*5", 1.0, 50.0);
test("asin(sin(x))", 3.14159265358979323, 0.0);
test("x^(1/2)", 2.0, sqrt(2.0));
test("x^(1/2)*2", 2.0, 2.0*sqrt(2.0));
test("(1/2)*x^2+3*x-5", 1.0, -1.5);
test("2^3^4", 0.0, 2417851639229258349412352.0);
test("sin(x)^2", 0.5*3.14159265358979323, 1.0);
test("(2)^(3)", 0.0, 8);
test("(2*3)^(3*4)", 0.0, 2176782336.0);
test("sin(x^2)", sqrt(3.14159265358979323), 0.0);
test("5*4/2", 0.0, 10.0);
test("5/4*2", 0.0, 2.5);
test("10%2", 0.0, 0.0);
test("10.5%2", 0.0, 0.5);
test("0%2", 0.0, 0.0);
test("2%0", 0.0, NOPOINT);
test("--x", 1.0, 1.0);
test("--x", -1.0, -1.0);
test("---x", -1.0, 1.0);
test("---x", 1.0, -1.0);
// Constants
test("e", 0.0, 2.7128182846);
test("pi", 0.0, 3.1415926536);
// Functions
test("sin()", 0.0, NOPOINT);
test("sin(0.0)", 0.0, 0.0);
test("sin(3.14159265358979323)", 0.0, 0.0);
test("sin(3.14159265358979323/2.00000000000000000000000000)", 0.0, 1.0);
test("cos()", 0.0, NOPOINT);
test("cos(0.0)", 0.0, 1.0);
test("cos(3.14159265358979323)", 0.0, -1.0);
test("cos(3.14159265358979323/2.00000000000000000000000000)", 0.0, 0.0);
test("sec(x) == 1/cos(x)", 0.2332744, 1.0);
test("csc(x) == 1/sin(x)", 0.2332744, 1.0);
test("cot(x) == 1/tan(x)", 0.2332744, 1.0);
test("abs(0.0)", 0.0, 0.0);
test("abs(x)", 1.0, 1.0);
test("abs(x)", -1.0, 1.0);
test("abs(x)", NOPOINT, NOPOINT);
test("abs(x)", INF, INF);
test("abs(x)", -INF, INF);
test("abs(-0.000000000001)", 0.0, 0.000000000001);
test("cos(acos(x))", 0.3875823288, 0.3875823288, 0.0000000001);
test("acos(cos(x))", 2.3875823288, 2.3875823288, 0.0000000001);
test("asin(sin(x))", 0.7540103248, 0.7540103248, 0.0000000001);
test("sin(asin(x))", 0.3875823288, 0.3875823288, 0.0000000001);
test("tan(atan(x))", 2.3875823288, 2.3875823288, 0.0000000001);
test("atan(tan(x))", 0.3875823288, 0.3875823288, 0.0000000001);
test("sqrt(4) == 2.0", 0.0, 1.0);
test("sqrt(0) == 0.0", 0.0, 1.0);
test("sqrt(-1)", 0.0, NOPOINT);
test("sqrt(2)", 0.0, 1.4142135623730951);
test("cbrt(0.0) == 0.0", 0.0, 1.0);
test("cbrt(8.0) == 2.0", 0.0, 1.0);
test("cbrt(-1)", 0.0, -1.0);
test("cbrt(2)", 0.0, 1.2599210498948734);
// TODO: cosh, exp, log, ln, sinh, tanh
// Expressions / Comparison
test("0.0>0.0", 0.0, 0.0);
test("0.0>=0.0", 0.0, 1.0);
test("0.0<0.0", 0.0, 0.0);
test("0.0<=0.0", 0.0, 1.0);
test("0.0=0.0", 0.0, 1.0);
test("0.0!=0.0", 0.0, 0.0);
test("1.0!=0.0", 0.0, 1.0);
test("sin(1.0)!=sin(0.0)", 0.0, 1.0);
test("sin()!=sin()", 0.0, 1.0);
test("0.0==0.0", 0.0, 1.0);
test("1.0>0.0", 0.0, 1.0);
test("1.0>=0.0", 0.0, 1.0);
test("0.0>1.0", 0.0, 0.0);
test("0.0>=1.0", 0.0, 0.0);
test("1.0<0.0", 0.0, 0.0);
test("1.0<=0.0", 0.0, 0.0);
test("0.0<1.0", 0.0, 1.0);
test("0.0<=1.0", 0.0, 1.0);
test("(0.0/0.0)==(0.0/0.0)", 0.0, 0.0);
test("(0.0/0.0)==(1.0/0.0)", 0.0, 0.0);
test("(1.0/0.0)==(1.0/0.0)", 0.0, 1.0); // inf == inf
test("(1.0/0.0)==-(1.0/0.0)", 0.0, 0.0);
test("(0.0/0.0)==-(1.0/0.0)", 0.0, 0.0);
test("(1.0/0.0)==(0.0/0.0)", 0.0, 0.0);
test("1&&1", 0.0, 1.0);
test("1&&0", 0.0, 0.0);
test("0&&1", 0.0, 0.0);
test("0&&2", 0.0, 0.0);
test("3&&2", 0.0, 1.0);
test("1||1", 0.0, 1.0);
test("0||1", 0.0, 1.0);
test("1||0", 0.0, 1.0);
test("0||0", 0.0, 0.0);
test("2||4", 0.0, 1.0);
test("1||(2&&0)", 0.0, 1.0);
test("(1||2)&&0", 0.0, 0.0);
test("1||2&&0", 0.0, 1.0);
test("2&&0||1", 0.0, 1.0);
test("2&&1||0", 0.0, 1.0);
test("0||1&&0", 0.0, 0.0);
test("1.0 == (1.0 == 1.0)", 0.0, 1.0);
test("1.0 != (1.0 == 0.0)", 0.0, 1.0);
test("1.0 != (1.0 == 1.0)", 0.0, 0.0);
test("0.0 == (1.0 == 0.0)", 0.0, 1.0);
test("-1==1", 0.0, 0.0);
test("-1==-1", 0.0, 1.0);
test("1==-1", 0.0, 0.0);
test("1!=-1", 0.0, 1.0);
test("-1!=1", 0.0, 1.0);
test("-1!=-1", 0.0, 0.0);
test("!0.0", 0.0, 1.0);
test("!1.0", 0.0, 0.0);
test("!-1.0", 0.0, 0.0);
test("!2.0", 0.0, 0.0);
test("!x", INF, 0.0);
test("!x", NOPOINT, 1.0);
test("!(1 > 2)", 0.0, 1.0);
test("!1.0 > -1.0", 0.0, 1.0); // (!1.0) > -1.0
test("!!x", 1.0, 1.0);
test("!!!x", 1.0, 0.0);
test("!!!!x", 1.0, 1.0);
// Bit operations
test("32&4", 0.0, 0.0);
test("32&4|2", 0.0, 2.0);
test("32|4&2", 0.0, 0.0);
test("32|4", 0.0, 36.0);
test("0&257", 0.0, 0.0);
test("257&0", 0.0, 0.0);
test("257|0", 0.0, 257.0);
test("0|257", 0.0, 257.0);
test("-1|257", 0.0, -1);
test("257|-1", 0.0, -1);
// Scalars
new KstScalar("test1", 0L, 1.0, true);
new KstScalar("test2", 0L, 0.0, true);
new KstScalar("test3", 0L, -1.0, true);
new KstScalar("test4", 0L, NOPOINT, true);
new KstScalar("test5", 0L, INF, true);
new KstScalar("test6", 0L, -INF, true);
test("[test1]", 0.0, 1.0);
test("[test4]", 0.0, NOPOINT);
test("[test4] - [test4]", 0.0, NOPOINT);
test("[test4] - [test5]", 0.0, NOPOINT);
test("[test4]*[test5]", 0.0, NOPOINT);
test("[sdf]", 0.0, NOPOINT);
test("[=10+10]", 0.0, 20.0);
// Vectors
KstVector::generateVector(0, 1.0, 10, "1");
KstVector::generateVector(0, 1.0, 10, "V1");
KstVector::generateVector(1.0, 2.0, 10, "V2");
KstVector::generateVector(0, 1.0, 2, "V3");
KstVector::generateVector(-1.0, 1.0, 1000, "V4");
KstVector::generateVector(-1.0, 1.0, 1000, "V5-%+-_!");
test("[V2] - [V1]", 0.0, 1.0);
test("[V2[9]]", 0.0, 2.0);
test("[V2[5+4]]", 0.0, 2.0);
test("[V2[]]", 0.0, 1.0);
test("2*sin([V5-%+-_!])", 0.0, -1.6829419696157930);
// TODO: interpolation, more vector combinations
// Plugins
test("2*plugin(bin, [V4], 12)", 1.0, -1.9779779779779778);
test("4*plugin(bin, [V4], x)", 5.0, -3.9839839839839839);
test("-3*plugin(bin, x, 12)", 2.0, NOPOINT);
xVector = KstVector::generateVector(0, 100, 2000, "XVector");
test("-3*plugin(bin, x, 12)", 2.0, -0.8254127063531767);
test("-3*plugin(bin, y, 12)", 2.0, NOPOINT);
// TODO: more plugin tests
// TODO: float notation
// Combinations
test("1|0&&0", 0.0, 0.0);
test("0&&0|1", 0.0, 0.0);
test("0&&1|0", 0.0, 0.0);
test("0||1&1", 0.0, 1.0);
test("0||2&1", 0.0, 0.0);
test("2&1||0", 0.0, 0.0);
test("1-1||0", 0.0, 0.0);
test("2-2||0", 0.0, 0.0);
test("0||2-2", 0.0, 0.0);
test("8|2*2", 0.0, 12.0);
test("2*2|8", 0.0, 12.0);
test("[V1] > 0.0", 0.0, 0.0);
test("[V1] > -1.0", 0.0, 1.0);
test("[1] > 0.0", 0.0, 0.0);
test("[1] > -1.0", 0.0, 1.0);
test("-([V1]*sin([V1]*[V2])+[V3]*cos([V3]*[V3]))", 0.0, 0.0);
test("[V3] * -1", 0.0, 0.0);
/* Wrap a testcase with this and run bison with -t in order to get a trace
* of the parse stack */
#if 0
yydebug = 1;
yydebug = 0;
#endif
// Errors:
testParseFail("");
testParseFail(" ");
testParseFail("\t");
testParseFail(" \t \t");
testParseFail("[]");
testParseFail("[[]");
testParseFail("[]]");
testParseFail("]");
testParseFail("[");
testParseFail("][");
testParseFail("[][");
testParseFail("foo(, 3)");
testParseFail("foo(3,)");
testParseFail("foo(3,,5)");
testParseFail("foo([])");
testParseFail("foo(4, [])");
testParseFail("/");
testParseFail("/2");
testParseFail("2/");
testParseFail("2//2");
testParseFail("%");
testParseFail("%2");
testParseFail("2%");
testParseFail("2%%2");
testParseFail("|");
testParseFail("||");
testParseFail("|2");
testParseFail("2|");
testParseFail("||2");
testParseFail("2||");
testParseFail("2|||2");
testParseFail("&");
testParseFail("&&");
testParseFail("&2");
testParseFail("2&");
testParseFail("&&2");
testParseFail("2&&");
testParseFail("2&&&2");
testParseFail("*");
testParseFail("*2");
testParseFail("2*");
testParseFail("2**2");
testParseFail("^");
testParseFail("^2");
testParseFail("2^^2");
testParseFail("2^");
testParseFail("+");
testParseFail("+2");
testParseFail("2+");
testParseFail("2++2");
testParseFail("-");
testParseFail("2-");
testParseFail("-2-");
testParseFail("2!");
testParseFail("!");
testParseFail("()");
testParseFail("2()");
testParseFail("()2");
testParseFail("_");
testParseFail("#");
testParseFail("$");
testParseFail(")");
testParseFail("(");
testParseFail(")(");
testParseFail("2&|2");
testParseFail("2&&||2");
testParseFail("2&&+2");
testParseFail("2+&&2");
testParseFail("2*&&2");
testParseFail("2&&*2");
testParseFail("2<>2");
testParseFail("2=<2");
testParseFail("2=>2");
testParseFail("2><2");
testParseFail("<");
testParseFail("<2");
testParseFail("2<");
testParseFail("2<<2");
testParseFail(">");
testParseFail(">2");
testParseFail("2>");
testParseFail("2>>2");
testParseFail(">=");
testParseFail(">=2");
testParseFail("2>=");
testParseFail("2>=>=2");
testParseFail("<=");
testParseFail("<=2");
testParseFail("2<=");
testParseFail("2<=<=2");
testParseFail("2<==2");
testParseFail(".");
testParseFail(".2");
testParseFail("2.");
testParseFail(",");
testParseFail(",2");
testParseFail("2,"); // Doesn't give a specific error - how to catch this?
testParseFail("2*sin(x");
testParseFail("2*sin(x)()");
testText("3*x", "3*x");
testText("(3*x)", "(3*x)");
testText("3*(x)", "3*x");
testText("((3*x))", "(3*x)");
testText(" ((3 * x)) ", "(3*x)");
testText(" ((3 * x)) ", "(3*x)");
testText("(-3)", "(-3)");
testText("(x)", "x");
testText("(3*(-(x+5)))", "(3*(-(x+5)))");
testText("(sin((x)))", "sin(x)");
exitHelper();
if (rc == KstTestSuccess) {
printf("All tests passed!\n");
}
return -rc;
}
void setup(void) {
Serial.begin(9600);
progmemPrintln(PSTR("TFT LCD test"));
#ifdef USE_ADAFRUIT_SHIELD_PINOUT
progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
#else
progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
#endif
tft.reset();
uint16_t identifier = tft.readID();
if(identifier == 0x9325) {
progmemPrintln(PSTR("Found ILI9325 LCD driver"));
} else if(identifier == 0x9328) {
progmemPrintln(PSTR("Found ILI9328 LCD driver"));
} else if(identifier == 0x7575) {
progmemPrintln(PSTR("Found HX8347G LCD driver"));
} else {
progmemPrint(PSTR("Unknown LCD driver chip: "));
Serial.println(identifier, HEX);
progmemPrintln(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
progmemPrintln(PSTR(" #define USE_ADAFRUIT_SHIELD_PINOUT"));
progmemPrintln(PSTR("should appear in the library header (Adafruit_TFT.h)."));
progmemPrintln(PSTR("If using the breakout board, it should NOT be #defined!"));
progmemPrintln(PSTR("Also if using the breakout, double-check that all wiring"));
progmemPrintln(PSTR("matches the tutorial."));
return;
}
tft.begin(identifier);
progmemPrintln(PSTR("Benchmark Time (microseconds)"));
progmemPrint(PSTR("Screen fill "));
Serial.println(testFillScreen());
delay(500);
progmemPrint(PSTR("Text "));
Serial.println(testText());
delay(3000);
progmemPrint(PSTR("Lines "));
Serial.println(testLines(CYAN));
delay(500);
progmemPrint(PSTR("Horiz/Vert Lines "));
Serial.println(testFastLines(RED, BLUE));
delay(500);
progmemPrint(PSTR("Rectangles (outline) "));
Serial.println(testRects(GREEN));
delay(500);
progmemPrint(PSTR("Rectangles (filled) "));
Serial.println(testFilledRects(YELLOW, MAGENTA));
delay(500);
progmemPrint(PSTR("Circles (filled) "));
Serial.println(testFilledCircles(10, MAGENTA));
progmemPrint(PSTR("Circles (outline) "));
Serial.println(testCircles(10, WHITE));
delay(500);
progmemPrint(PSTR("Triangles (outline) "));
Serial.println(testTriangles());
delay(500);
progmemPrint(PSTR("Triangles (filled) "));
Serial.println(testFilledTriangles());
delay(500);
progmemPrint(PSTR("Rounded rects (outline) "));
Serial.println(testRoundRects());
delay(500);
progmemPrint(PSTR("Rounded rects (filled) "));
Serial.println(testFilledRoundRects());
delay(500);
progmemPrintln(PSTR("Done!"));
}
int main(int argc, char **argv)
{
WMScreen *scr;
WMPixmap *pixmap;
/* Initialize the application */
WMInitializeApplication("Test@eqweq_ewq$eqw", &argc, argv);
testUD();
/*
* Open connection to the X display.
*/
dpy = XOpenDisplay("");
if (!dpy) {
puts("could not open display");
exit(1);
}
/* This is used to disable buffering of X protocol requests.
* Do NOT use it unless when debugging. It will cause a major
* slowdown in your application
*/
#if 0
XSynchronize(dpy, True);
#endif
/*
* Create screen descriptor.
*/
scr = WMCreateScreen(dpy, DefaultScreen(dpy));
/*
* Loads the logo of the application.
*/
pixmap = WMCreatePixmapFromFile(scr, "logo.xpm");
/*
* Makes the logo be used in standard dialog panels.
*/
if (pixmap) {
WMSetApplicationIconPixmap(scr, pixmap);
WMReleasePixmap(pixmap);
}
/*
* Do some test stuff.
*
* Put the testSomething() function you want to test here.
*/
testText(scr);
testFontPanel(scr);
testColorPanel(scr);
testTextField(scr);
#if 0
testBox(scr);
testButton(scr);
testColorPanel(scr);
testColorWell(scr);
testDragAndDrop(scr);
testFrame(scr);
testGradientButtons(scr);
testList(scr);
testOpenFilePanel(scr);
testProgressIndicator(scr);
testPullDown(scr);
testScrollView(scr);
testSlider(scr);
testSplitView(scr);
testTabView(scr);
testTextField(scr);
#endif
/*
* The main event loop.
*
*/
WMScreenMainLoop(scr);
return 0;
}
void CharIterTest::TestConstructionAndEquality() {
UnicodeString testText("Now is the time for all good men to come to the aid of their country.");
UnicodeString testText2("Don't bother using this string.");
UnicodeString result1, result2, result3;
CharacterIterator* test1 = new StringCharacterIterator(testText);
CharacterIterator* test1b= new StringCharacterIterator(testText, -1);
CharacterIterator* test1c= new StringCharacterIterator(testText, 100);
CharacterIterator* test1d= new StringCharacterIterator(testText, -2, 100, 5);
CharacterIterator* test1e= new StringCharacterIterator(testText, 100, 20, 5);
CharacterIterator* test2 = new StringCharacterIterator(testText, 5);
CharacterIterator* test3 = new StringCharacterIterator(testText, 2, 20, 5);
CharacterIterator* test4 = new StringCharacterIterator(testText2);
CharacterIterator* test5 = test1->clone();
if (test1d->startIndex() < 0)
errln("Construction failed: startIndex is negative");
if (test1d->endIndex() > testText.length())
errln("Construction failed: endIndex is greater than the text length");
if (test1d->getIndex() < test1d->startIndex() || test1d->endIndex() < test1d->getIndex())
errln("Construction failed: index is invalid");
if (*test1 == *test2 || *test1 == *test3 || *test1 == *test4)
errln("Construction or operator== failed: Unequal objects compared equal");
if (*test1 != *test5)
errln("clone() or equals() failed: Two clones tested unequal");
if (test1->hashCode() == test2->hashCode() || test1->hashCode() == test3->hashCode()
|| test1->hashCode() == test4->hashCode())
errln("hashCode() failed: different objects have same hash code");
if (test1->hashCode() != test5->hashCode())
errln("hashCode() failed: identical objects have different hash codes");
if(test1->getLength() != testText.length()){
errln("getLength of CharacterIterator failed");
}
test1->getText(result1);
test1b->getText(result2);
test1c->getText(result3);
if(result1 != result2 || result1 != result3)
errln("construction failed or getText() failed");
test1->setIndex(5);
if (*test1 != *test2 || *test1 == *test5)
errln("setIndex() failed");
*((StringCharacterIterator*)test1) = *((StringCharacterIterator*)test3);
if (*test1 != *test3 || *test1 == *test5)
errln("operator= failed");
delete test2;
delete test3;
delete test4;
delete test5;
delete test1b;
delete test1c;
delete test1d;
delete test1e;
StringCharacterIterator* testChar1=new StringCharacterIterator(testText);
StringCharacterIterator* testChar2=new StringCharacterIterator(testText2);
StringCharacterIterator* testChar3=(StringCharacterIterator*)test1->clone();
testChar1->getText(result1);
testChar2->getText(result2);
testChar3->getText(result3);
if(result1 != result3 || result1 == result2)
errln("getText() failed");
testChar3->setText(testText2);
testChar3->getText(result3);
if(result1 == result3 || result2 != result3)
errln("setText() or getText() failed");
testChar3->setText(testText);
testChar3->getText(result3);
if(result1 != result3 || result1 == result2)
errln("setText() or getText() round-trip failed");
delete testChar1;
delete testChar2;
delete testChar3;
delete test1;
}
int main(int argc, char const *argv[])
{
std::cout << "Travis make Test successful." << std::endl;
TextWord test("blub", 0);
if (test.exactMatch("b")) {
std::cout << "found b !!! error" << std::endl;
}
if (test.exactMatch("xlub")) {
std::cout << "found xlub!!! error" << std::endl;
}
if (test.exactMatch("blub")) {
std::cout << "found blub" << std::endl;
}
if (test.partialMatch("b")) {
std::cout << "found b" << std::endl;
}
if (test.partialMatch("xlub")) {
std::cout << "found xlub!!! error" << std::endl;
}
if (test.partialMatch("lub")) {
std::cout << "found lub" << std::endl;
}
if (test.partialMatch("blub")) {
std::cout << "found blub" << std::endl;
}
test.status();
TheText testText("input.txt");
std::cout << "Total number of words: " << testText.wordCount() << std::endl;
std::cout << "Count of 'der': " << testText.exactMatchCount("der") << std::endl;
std::cout << "Occurances of 'der':" << std::endl;
for (auto &&occurance :testText.getOccurances("der")) {
std::cout << "Index: " << occurance << std::endl;
}
DirFileSearch testDir;
testDir.addFile("Readme.md");
for (auto &&item :testDir.files()) {
std::cout << item << std::endl;
}
std::vector<std::string> files = testDir.files();
auto result = testDir.exactSearchCount("der");
for (auto &&element : result) {
std::cout << "Count of 'der': " << element.second << std::endl << "in file: " << element.first << std::endl;
}
auto result2 = testDir.exactSearchOccurances("der");
for (auto &&item2 : result2) {
std::cout << "Occurances of 'der' " << std::endl;
if (item2.second.empty()) {
std::cout << "not found";
} else {
for (auto &&occurance : item2.second) {
std::cout << occurance << ", ";
}
}
std::cout << std::endl << "in file: " << item2.first << std::endl;
}
/*for (unsigned int index = 0; index < result.size(); ++index) {
std::cout << "Count of 'der': " << result.at(index) << " in file: " << files.at(index) << std::endl;
}
*/
return 0;
}
int main(int argc, char *argv[])
{
#ifdef __XENO__
struct sched_param param = { 99 };
mlockall(MCL_CURRENT | MCL_FUTURE);
pthread_setschedparam(pthread_self(), SCHED_FIFO, ¶m);
#endif
if (!raspi_map_hw()) {
perror("Could not map hardware registers");
exit(1);
}
#ifdef __XENO__
pthread_set_mode_np(0, PTHREAD_WARNSW|PTHREAD_PRIMARY);
#endif
// ILI9341(int8_t _CS, int8_t _DC, int8_t _RST, int8_t _BL, int8_t _MOSI, int8_t _SCLK, int8_t _MISO);
ILI9341 tft = ILI9341(PIN_CS, PIN_DC, PIN_RESET, PIN_BL, PIN_MOSI, PIN_SCLK, PIN_MISO);
printf("Setting up TFT...\n");
tft.begin();
g_HWSPI=0;
if (argc > 1)
{
g_HWSPI=1;
}
if (g_HWSPI)
{
printf("Setup HW SPI parameters...\n");
}
else
{
printf("Setup SW SPI (Bit-Banger) parameters...\n");
}
printf("HWReset done, initializing display\n") ;
int i, colors[8] = { ILI9341_BLACK, ILI9341_BLUE, ILI9341_RED, ILI9341_GREEN, ILI9341_CYAN, ILI9341_MAGENTA, ILI9341_WHITE, ILI9341_YELLOW };
begin();
printf("Done intializing, now fill screens...\n");
for (i=0;i<8 ;i++ )
{
fillScreen(ILI9341_BLACK);
//sleep(1);
fillScreen(colors[i]);
//sleep (2);
}
printf("Setting up for HWreset\n");
printf("Benchmark\tTime (microseconds)\n");
printf("Screen fill\t%f\n", testFillScreen());
sl_delay(500);
printf("Text\t%f\n",testText());
sl_delay(3000);
printf("Lines\t%f\n",testLines(ILI9341_CYAN));
sl_delay(500);
printf("Horiz/Vert Lines\t%f\n", testFastLines(ILI9341_RED, ILI9341_BLUE));
sl_delay(500);
printf("Rectangles (outline)\t%f",testRects(ILI9341_GREEN));
sl_delay(500);
printf("Rectangles (filled)\t%f\n", testFilledRects(ILI9341_YELLOW, ILI9341_MAGENTA));
sl_delay(500);
printf("Circles (filled)\t%f\n", testFilledCircles(10, ILI9341_MAGENTA));
printf("Circles (outline)\t%f\n", testCircles(10, ILI9341_WHITE));
sl_delay(500);
printf("Triangles (outline)\t%f\n", testTriangles());
sl_delay(500);
printf("Triangles (filled)\t%f\n", testFilledTriangles());
sl_delay(500);
printf("Rounded rects (outline)\t%f\n", testRoundRects());
sl_delay(500);
printf("Rounded rects (filled)\t%f\n", testFilledRoundRects());
sl_delay(500);
printf("Done!\n");
for(uint8_t rotation=0; rotation<4; rotation++)
{
tft.setRotation(rotation);
testText();
sl_delay(1000);
}
#ifdef __XENO__
pthread_set_mode_np(PTHREAD_WARNSW, 0);
#endif
return 1;
}