login::login(QWidget *parent) :
QDialog(parent),
ui(new Ui::login)
{
ui->setupUi(this);
setWindowTitle("Welcome to Crypt-Chat!");
mysocket = new QTcpSocket(this);
buffer = new QBuffer(this);
buffer->open(QIODevice::ReadWrite);
ui->login_2->setDefault(true);
this->connect(ui->createnew,SIGNAL(clicked()),this,SLOT(opennew()));
this->connect(ui->changepass,SIGNAL(clicked()),this,SLOT(changepassw()));
this->connect(ui->login_2,SIGNAL(clicked()),this,SLOT(checklogin()));
connect(this, SIGNAL(enterlogin()), this, SLOT(checklogin()));
this->connect(ui->settingsbutton,SIGNAL(clicked()), this, SLOT(settingsb()));
connect(mysocket, SIGNAL(readyRead()), SLOT(receiveMessage()));
connect(this, SIGNAL(loginfosend(string*)), SLOT(sendMessage(string*)));
connect(this, SIGNAL(sendforkey(string*)), SLOT(sendMessage(string*)));
connect(this, SIGNAL(logconnect()), SLOT(toggleConnection()));
connect(this, SIGNAL(connectfailed()), this, SLOT(connectfalse()));
connect(this, SIGNAL(connectworked()), this, SLOT(connecttrue()));
}
void MainWindow::SetConnectionState()
{
qDebug() << __FUNCTION__;
/* force querier to disconnect */
liveEditingEnabled = false;
querier->device_lost = true;
querier->still_not_exists = false;
toggleConnection(!deviceStatus, true);
if(deviceStatus)
querier->timer.setInterval(0);
}
void MainWindow::readFromConfig()
{
//switchLanguage(NULL);
/* read saved state */
readSettings(&settings, false);
toggleASQLow(ui->checkBox_asq_detectLow->isChecked());
toggleASQHigh(ui->checkBox_asq_detectHigh->isChecked());
toggleTransmitPilot(ui->checkBox_transmitter_pilot->isChecked());
toggleTransmitRds(ui->checkBox_transmitter_rds->isChecked());
toggleTransmitEnabled(ui->checkBox_transmitter_enabled->isChecked());
toggleRDSaf(ui->checkBox_rds_useaf->isChecked());
toggleRDSfifo(ui->checkBox_rds_fifo->isChecked());
toggleRDSPSVisibility(ui->spinBox_rds_ps_msgs->value());
UpdateRDSRTFileEnabled(ui->checkBox_rds_title_file->isChecked());
UpdateRDSRTPlusEnabled();
//updateHTTPListener();
createLanguageMenu();
ui->actionSelect_Language->setMenu(languageMenu);
setupTrayIcon();
SetWindowMode(!ui->checkBox_mini_mode->isChecked());
SetAudioCompLimPresetByParams();
/* actions for querier */
if(ui->checkBox_rds_time->isChecked()) {
querier->rdsInterval = ui->spinBox_rds_time_int->value() * 1000;
}
/* try to connect */
toggleConnection(false, false);
if(ui->checkBox_sw_autoconnect->isChecked())
querier->timer.start();
else {
QStatusBar *status = statusBar();
status->showMessage(tr("Default config editing mode..."));
status->show();
}
this->adjustSize();
this->resize(1,1);
this->updateGeometry();
qDebug() << __FUNCTION__;
}
changepassword::changepassword(QWidget *parent) :
QDialog(parent),
ui(new Ui::changepassword)
{
ui->setupUi(this);
setWindowTitle("Change Password");
changesocket = new QTcpSocket(this);
buffer = new QBuffer(this);
buffer->open(QIODevice::ReadWrite);
connect(changesocket, SIGNAL(readyRead()), SLOT(receiveMessage()));
connect(this, SIGNAL(connectworked(QString*)), SLOT(sendMessage(QString*)));
connect(this, SIGNAL(logconnect()), SLOT(toggleConnection()));
connect(this, SIGNAL(receivedthis(string)), this , SLOT(checkiftrue(string)));
this->connect(ui->submit,SIGNAL(clicked()), this, SLOT(changepass()));
this->connect(ui->cancel,SIGNAL(clicked()), this, SLOT(cancel()));
}
void MainWindow::RedrawEverything(bool bFound)
{
int ret, transmitting;
char cpuid[32];
char rev[32];
QStatusBar *status = statusBar();
qDebug() << __FUNCTION__;
fmtxEEPROMInfoClean();
liveEditingEnabled=false;
querier->is_ready=false;
deviceStatus=bFound;
toggleConnection(bFound, false);
if(!bFound) {
querier->is_ready=ui->checkBox_sw_autoconnect->isChecked();
if(!ui->checkBox_sw_autoconnect->isChecked())
querier->timer.stop();
qDebug() << "frontend flagged as" << bFound << " returning.";
if(!is_normal || !this->isVisible())
trayIcon->showMessage(tr("FmStick disconnected"),
tr("Device disconnected!"),
QSystemTrayIcon::Information, 5 * 1000);
return;
}
status->showMessage(tr("(Re)Reading frontend info..."), 10000);
status->show();
cpuid[0] = '\0';
rev[0] = '\0';
querier->HidAccessMutex.lock();
ret = fmtxIoAppIdString(cpuid, rev);
querier->HidAccessMutex.unlock();
if(ret!=FMTX_MODE_OK) {
qDebug() << "can't get id string";
goto redraw_err;
}
qDebug() << "got CPU ID: "<<QString(cpuid)<<" rev.:"<<QString(rev);
ui->lineEdit_hw_id_cpuid->setText(QString(cpuid));
ui->lineEdit_hw_id_cpufwid->setText(QString(rev));
status->showMessage(tr("Reading EEPROM..."), 10000);
status->show();
qDebug() << "Reading EEPROM...";
querier->HidAccessMutex.lock();
fmtxCmdSpecial = FMTX_SPECIAL_EEPROM; ///< now work with eeprom instead of frontend
ret=fmtxEEPROMReadConfig();
fmtxCmdSpecial = FMTX_SPECIAL_FRONTEND;
querier->HidAccessMutex.unlock();
ui->checkBox_hw_run_txAtPowerUp->blockSignals(true);
ui->checkBox_hw_run_txAtPowerUp->setChecked(fmtxEEPROMGetStartupFlag());
ui->checkBox_hw_run_txAtPowerUp->blockSignals(false);
if(ret==FMTX_MODE_POWER_DOWN) {
qDebug() << "EEPROM is empty yet!";
} else if(ret!=FMTX_MODE_OK) {
qDebug() << "Can't read EEPROM";
goto redraw_err;
}
qDebug() << "EEPROM Readed..";
transmitting = 0;
querier->HidAccessMutex.lock();
ret = fmtxIoAppFeGetMode(&transmitting);
querier->HidAccessMutex.unlock();
qDebug() << "Frontend mode: " << ret << "transmitting: " << transmitting;
if(ret == FMTX_MODE_POWER_DOWN){
qDebug() << "Frontend powered down!";
ret = SetFrontendPowerUp();
}
if(ret!=FMTX_MODE_POWER_UP && ret!=FMTX_MODE_TRANSMITTING) {
qDebug() << "Frontend not found..";
SetTransmitIcon(ICON_WARN);
goto redraw_err;
}
if(transmitting) {
qDebug() << "Already transmitting!";
SetTransmitIcon(ICON_TX);
}
/* needed to detect if hardware supports rds */
querier->HidAccessMutex.lock();
DisplayFirmwareInfo();
querier->HidAccessMutex.unlock();
if(fmtxCmdStatus!=FMTX_MODE_OK)
goto redraw_err;
if(ui->checkBox_rewriteCfg->isChecked()) {
qDebug() << "Forcing configuration from software, instead of hardware!";
status->showMessage("Writing running config...", 10000);
status->show();
if(SetFrontendParams()!=FMTX_MODE_OK)
goto redraw_err;
//hack for digital audio
if(! SetDigitalAudioHack())
goto redraw_err;
}
status->showMessage(tr("Reading running config..."), 10000);
status->show();
querier->HidAccessMutex.lock();
ret=GetFrontendParams();
querier->HidAccessMutex.unlock();
if(ret!=FMTX_MODE_OK)
goto redraw_err;
liveEditingEnabled=ui->checkBox_sw_live_edit->isChecked();
statusBar()->hide();
this->adjustSize();
this->resize(1,1);
this->updateGeometry();
querier->is_ready=true;
qDebug() << "Redraw everything done! transmitting: " << transmitting;
if(!is_normal || !this->isVisible())
trayIcon->showMessage(tr("FmStick connected"),
tr("Device found and connected!%1")
.arg( transmitting ? tr("\nAnd transmitter is powered on!") : ""),
QSystemTrayIcon::Information, 5 * 1000);
return;
redraw_err:
if(!is_normal || !this->isVisible())
trayIcon->showMessage(tr("FmStick not connected"), tr("Can't connect to frontend!"),
QSystemTrayIcon::Critical, 5 * 1000);
status->showMessage(tr("Can't connect to frontend!"), 10000);
status->show();
qDebug() << "Error while redraw everything";
querier->is_ready=true;
SetTransmitIcon(ICON_ERR);
}
KiloWindow::KiloWindow(QWidget *parent): QWidget(parent), device(0), sending(false), connected(false) {
// Create status bar
status = new QStatusBar();
status->showMessage("disconnected.");
status->setSizeGripEnabled(false);
// Create status bar button
connect_button = new QToolButton(status);
status->addPermanentWidget(connect_button);
connect_button->setText("Connect");
connect(connect_button, SIGNAL(clicked()), this, SLOT(toggleConnection()));
// Create serial input window and its trigger button
serial_button = new QPushButton("Serial Input");
serial = new SerialWindow("Serial Input", this);
QObject::connect(serial_button, SIGNAL(clicked()), this, SLOT(serialShow()));
// Create calibration window and its trigger button
calib_button = new QPushButton("Calibration");
calib = new CalibWindow("Calibration Values", this);
QObject::connect(calib_button, SIGNAL(clicked()), this, SLOT(calibShow()));
connect(calib, SIGNAL(calibUID(int)), this, SLOT(calibUID(int)));
connect(calib, SIGNAL(calibLeft(int)), this, SLOT(calibLeft(int)));
connect(calib, SIGNAL(calibRight(int)), this, SLOT(calibRight(int)));
connect(calib, SIGNAL(calibStraight(int)), this, SLOT(calibStraight(int)));
connect(calib, SIGNAL(calibStop()), this, SLOT(calibStop()));
connect(calib, SIGNAL(calibSave()), this, SLOT(calibSave()));
QVBoxLayout *vbox = new QVBoxLayout;
vbox->addWidget(createDeviceSelect());
vbox->addWidget(createFileInput());
vbox->addWidget(createCommands());
vbox->addWidget(serial_button);
vbox->addWidget(calib_button);
vbox->addWidget(status);
setLayout(vbox);
setWindowTitle("Kilobots Toolkit");
setWindowIcon(QIcon(":/images/kilogui.png"));
setWindowState(Qt::WindowActive);
vusb_conn = new VUSBConnection();
ftdi_conn = new FTDIConnection();
serial_conn = new SerialConnection();
connect(ftdi_conn, SIGNAL(readText(QString)), serial, SLOT(addText(QString)));
connect(serial_conn, SIGNAL(readText(QString)), serial, SLOT(addText(QString)));
connect(vusb_conn, SIGNAL(error(QString)), this, SLOT(showError(QString)));
connect(vusb_conn, SIGNAL(status(QString)), this, SLOT(vusbUpdateStatus(QString)));
connect(ftdi_conn, SIGNAL(error(QString)), this, SLOT(showError(QString)));
connect(ftdi_conn, SIGNAL(status(QString)), this, SLOT(ftdiUpdateStatus(QString)));
connect(serial_conn, SIGNAL(error(QString)), this, SLOT(showError(QString)));
connect(serial_conn, SIGNAL(status(QString)), this, SLOT(serialUpdateStatus(QString)));
// Create thread
QThread *thread = new QThread();
connect(thread, SIGNAL(finished()), thread, SLOT(deleteLater()));
// Move connections to thread
vusb_conn->moveToThread(thread);
ftdi_conn->moveToThread(thread);
serial_conn->moveToThread(thread);
// Start thread and open connections
thread->start();
vusb_conn->open();
ftdi_conn->open();
serial_conn->open();
}
