コード例 #1
0
/**
 * cpuidle_idle_call - the main idle loop
 *
 * NOTE: no locks or semaphores should be used here
 * return non-zero on failure
 */
int cpuidle_idle_call(void)
{
	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
	struct cpuidle_driver *drv = cpuidle_get_driver();
	int next_state, entered_state;

	if (off)
		return -ENODEV;

	if (!initialized)
		return -ENODEV;

	/* check if the device is ready */
	if (!dev || !dev->enabled)
		return -EBUSY;

#if 0
	/* shows regressions, re-enable for 2.6.29 */
	/*
	 * run any timers that can be run now, at this point
	 * before calculating the idle duration etc.
	 */
	hrtimer_peek_ahead_timers();
#endif

	/* ask the governor for the next state */
	next_state = cpuidle_curr_governor->select(drv, dev);
	if (need_resched()) {
		local_irq_enable();
		return 0;
	}

	trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
	trace_cpu_idle_rcuidle(next_state, dev->cpu);

	if (need_resched()) {
		dev->last_residency = 0;
		local_irq_enable();
		entered_state = next_state;
		goto exit;
	}

	if (cpuidle_state_is_coupled(dev, drv, next_state))
		entered_state = cpuidle_enter_state_coupled(dev, drv,
							    next_state);
	else
		entered_state = cpuidle_enter_state(dev, drv, next_state);

	trace_power_end_rcuidle(dev->cpu);

exit:
	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);

	/* give the governor an opportunity to reflect on the outcome */
	if (cpuidle_curr_governor->reflect)
		cpuidle_curr_governor->reflect(dev, entered_state);

	return 0;
}
コード例 #2
0
/**
 * cpuidle_idle_call - the main idle loop
 *
 * NOTE: no locks or semaphores should be used here
 * return non-zero on failure
 */
int cpuidle_idle_call(void)
{
	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
	struct cpuidle_driver *drv = cpuidle_get_driver();
	int next_state, entered_state;

	if (off)
		return -ENODEV;

	if (!initialized)
		return -ENODEV;

	/* check if the device is ready */
	if (!dev || !dev->enabled)
		return -EBUSY;

#if 0
	/* shows regressions, re-enable for 2.6.29 */
	/*
	 * run any timers that can be run now, at this point
	 * before calculating the idle duration etc.
	 */
	hrtimer_peek_ahead_timers();
#endif

	/* ask the governor for the next state */
	next_state = cpuidle_curr_governor->select(drv, dev);
	if (need_resched()) {
		local_irq_enable();
		return 0;
	}

	trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
	trace_cpu_idle_rcuidle(next_state, dev->cpu);

	entered_state = cpuidle_enter_ops(dev, drv, next_state);

	trace_power_end_rcuidle(dev->cpu);
	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);

	if (entered_state >= 0) {
		/* Update cpuidle counters */
		/* This can be moved to within driver enter routine
		 * but that results in multiple copies of same code.
		 */
		dev->states_usage[entered_state].time +=
				(unsigned long long)dev->last_residency;
		dev->states_usage[entered_state].usage++;
	} else {
		dev->last_residency = 0;
	}

	/* give the governor an opportunity to reflect on the outcome */
	if (cpuidle_curr_governor->reflect)
		cpuidle_curr_governor->reflect(dev, entered_state);

	return 0;
}
コード例 #3
0
int cpuidle_idle_call(void)
{
	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
	struct cpuidle_driver *drv = cpuidle_get_driver();
	int next_state, entered_state;

	if (off)
		return -ENODEV;

	if (!initialized)
		return -ENODEV;

	
	if (!dev || !dev->enabled)
		return -EBUSY;

#if 0
	
	hrtimer_peek_ahead_timers();
#endif

	
	next_state = cpuidle_curr_governor->select(drv, dev);
	if (need_resched()) {
		local_irq_enable();
		return 0;
	}

	trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
	trace_cpu_idle_rcuidle(next_state, dev->cpu);

	entered_state = cpuidle_enter_ops(dev, drv, next_state);

	trace_power_end_rcuidle(dev->cpu);
	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);

	if (entered_state >= 0) {
		
		dev->states_usage[entered_state].time +=
				(unsigned long long)dev->last_residency;
		dev->states_usage[entered_state].usage++;
	} else {
		dev->last_residency = 0;
	}

	
	if (cpuidle_curr_governor->reflect)
		cpuidle_curr_governor->reflect(dev, entered_state);

	return 0;
}
コード例 #4
0
ファイル: cpuidle.c プロジェクト: andy78328/pmu-for-omap4
/**
 * cpuidle_idle_call - the main idle loop
 *
 * NOTE: no locks or semaphores should be used here
 * return non-zero on failure
 */
int cpuidle_idle_call(void)
{
	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
	struct cpuidle_driver *drv;
	int next_state, entered_state;

	if (off)
		return -ENODEV;

	if (!initialized)
		return -ENODEV;

	/* check if the device is ready */
	if (!dev || !dev->enabled)
		return -EBUSY;

	drv = cpuidle_get_cpu_driver(dev);

	/* ask the governor for the next state */
	next_state = cpuidle_curr_governor->select(drv, dev);
	if (need_resched()) {
		dev->last_residency = 0;
		/* give the governor an opportunity to reflect on the outcome */
		if (cpuidle_curr_governor->reflect)
			cpuidle_curr_governor->reflect(dev, next_state);
		local_irq_enable();
		return 0;
	}

	trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
	trace_cpu_idle_rcuidle(next_state, dev->cpu);

	if (cpuidle_state_is_coupled(dev, drv, next_state))
		entered_state = cpuidle_enter_state_coupled(dev, drv,
							    next_state);
	else
		entered_state = cpuidle_enter_state(dev, drv, next_state);

	trace_power_end_rcuidle(dev->cpu);
	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);

	/* give the governor an opportunity to reflect on the outcome */
	if (cpuidle_curr_governor->reflect)
		cpuidle_curr_governor->reflect(dev, entered_state);

	return 0;
}