コード例 #1
0
ファイル: USBHALHost.cpp プロジェクト: 3eggert/mbed
void USBHALHost::UsbIrqhandler() {
    if( LPC_USB->HcInterruptStatus & LPC_USB->HcInterruptEnable ) //Is there something to actually process?
    {
        
        uint32_t int_status = LPC_USB->HcInterruptStatus & LPC_USB->HcInterruptEnable;

        // Root hub status change interrupt
        if (int_status & OR_INTR_STATUS_RHSC) { 
            if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CSC) {
                if (LPC_USB->HcRhStatus & OR_RH_STATUS_DRWE) {
                    // When DRWE is on, Connect Status Change
                    // means a remote wakeup event.
                } else {

                    //Root device connected
                    if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CCS) { 
                        
                        // wait 150ms to avoid bounce
                        wait_ms(150);
                        
                        //Hub 0 (root hub), Port 1 (count starts at 1), Low or High speed
                        deviceConnected(0, 1, LPC_USB->HcRhPortStatus1 & OR_RH_PORT_LSDA); 
                    } 
                    
                    //Root device disconnected
                    else { 
                        
                        if (!(int_status & OR_INTR_STATUS_WDH)) {
                            usb_hcca->DoneHead = 0;
                        }
                        
                        // wait 200ms to avoid bounce
                        wait_ms(200);
                        
                        deviceDisconnected(0, 1, NULL, usb_hcca->DoneHead & 0xFFFFFFFE);
                        
                        if (int_status & OR_INTR_STATUS_WDH) {
                            usb_hcca->DoneHead = 0;
                            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_WDH;
                        }
                    }
                }
                LPC_USB->HcRhPortStatus1 = OR_RH_PORT_CSC;
            }
            if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRSC) {
                LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
            }
            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_RHSC;
        }

        // Writeback Done Head interrupt
        if (int_status & OR_INTR_STATUS_WDH) {
            transferCompleted(usb_hcca->DoneHead & 0xFFFFFFFE);
            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_WDH;
        }
    }
}
コード例 #2
0
ファイル: csyncthread.cpp プロジェクト: alexta901/mirall
void CSyncThread::startSync()
{
    if (!_syncMutex.tryLock()) {
        qDebug() << Q_FUNC_INFO << "WARNING: Another sync seems to be running. Not starting a new one.";
        return;
    }

    if( ! _csync_ctx ) {
        qDebug() << "XXXXXXXXXXXXXXXX FAIL: do not have csync_ctx!";
    }
    qDebug() << Q_FUNC_INFO << "Sync started";


    qDebug() << "starting to sync " << qApp->thread() << QThread::currentThread();
    _syncedItems.clear();
    _needsUpdate = false;

    _abortRequestedMutex.lock();
    if (!_abortRequested.fetchAndAddRelease(0)) {
        csync_resume(_csync_ctx);
    }
    _abortRequestedMutex.unlock();


    // maybe move this somewhere else where it can influence a running sync?
    MirallConfigFile cfg;

    if (!_journal->exists()) {
        qDebug() << "=====sync looks new (no DB exists), activating recursive PROPFIND if csync supports it";
        bool no_recursive_propfind = false;
        csync_set_module_property(_csync_ctx, "no_recursive_propfind", &no_recursive_propfind);
    } else {
        // retrieve the file count from the db and close it afterwards because
        // csync_update also opens the database.
        int fileRecordCount = 0;
        fileRecordCount = _journal->getFileRecordCount();
        _journal->close();

        if( fileRecordCount == -1 ) {
            qDebug() << "No way to create a sync journal!";
            emit csyncError(tr("Unable to initialize a sync journal."));

            csync_commit(_csync_ctx);
            emit finished();
            _syncMutex.unlock();
            thread()->quit();

            return;
            // database creation error!
        } else if ( fileRecordCount < 50 ) {
            qDebug() << "=====sync DB has only" << fileRecordCount << "items, enable recursive PROPFIND if csync supports it";
            bool no_recursive_propfind = false;
            csync_set_module_property(_csync_ctx, "no_recursive_propfind", &no_recursive_propfind);
        } else {
            qDebug() << "=====sync with existing DB";
        }
    }

    csync_set_module_property(_csync_ctx, "csync_context", _csync_ctx);
    csync_set_userdata(_csync_ctx, this);
    // TODO: This should be a part of this method, but we don't have
    // any way to get "session_key" module property from csync. Had we
    // have it, then we could keep this code and remove it from
    // AbstractCredentials implementations.
    if (Account *account = AccountManager::instance()->account()) {
        account->credentials()->syncContextPreStart(_csync_ctx);
    } else {
        qDebug() << Q_FUNC_INFO << "No default Account object, huh?";
    }
    // if (_lastAuthCookies.length() > 0) {
    //     // Stuff cookies inside csync, then we can avoid the intermediate HTTP 401 reply
    //     // when https://github.com/owncloud/core/pull/4042 is merged.
    //     QString cookiesAsString;
    //     foreach(QNetworkCookie c, _lastAuthCookies) {
    //         cookiesAsString += c.name();
    //         cookiesAsString += '=';
    //         cookiesAsString += c.value();
    //         cookiesAsString += "; ";
    //     }
    //     csync_set_module_property(_csync_ctx, "session_key", cookiesAsString.to
    // }

    // csync_set_auth_callback( _csync_ctx, getauth );
    csync_set_log_callback( csyncLogCatcher );
    csync_set_log_level( 11 );

    _syncTime.start();

    QElapsedTimer updateTime;
    updateTime.start();
    qDebug() << "#### Update start #################################################### >>";

    if( csync_update(_csync_ctx) < 0 ) {
        handleSyncError(_csync_ctx, "csync_update");
        return;
    }
    qDebug() << "<<#### Update end #################################################### " << updateTime.elapsed();

    if( csync_reconcile(_csync_ctx) < 0 ) {
        handleSyncError(_csync_ctx, "csync_reconcile");
        return;
    }

    slotProgress(Progress::StartSync, SyncFileItem(), 0, 0);

    _progressInfo = Progress::Info();

    _hasFiles = false;
    bool walkOk = true;
    _seenFiles.clear();

    if( csync_walk_local_tree(_csync_ctx, &treewalkLocal, 0) < 0 ) {
        qDebug() << "Error in local treewalk.";
        walkOk = false;
    }
    if( walkOk && csync_walk_remote_tree(_csync_ctx, &treewalkRemote, 0) < 0 ) {
        qDebug() << "Error in remote treewalk.";
    }

    // Adjust the paths for the renames.
    for (SyncFileItemVector::iterator it = _syncedItems.begin();
            it != _syncedItems.end(); ++it) {
        it->_file = adjustRenamedPath(it->_file);
    }

    if (!_hasFiles && !_syncedItems.isEmpty()) {
        qDebug() << Q_FUNC_INFO << "All the files are going to be removed, asking the user";
        bool cancel = false;
        emit aboutToRemoveAllFiles(_syncedItems.first()._dir, &cancel);
        if (cancel) {
            qDebug() << Q_FUNC_INFO << "Abort sync";
            return;
        }
    }

    if (_needsUpdate)
        emit(started());

    ne_session_s *session = 0;
    // that call to set property actually is a get which will return the session
    // FIXME add a csync_get_module_property to csync

    csync_set_module_property(_csync_ctx, "get_dav_session", &session);
    Q_ASSERT(session);

    _propagator.reset(new OwncloudPropagator (session, _localPath, _remotePath,
                                              _journal, &_abortRequested));
    connect(_propagator.data(), SIGNAL(completed(SyncFileItem)),
            this, SLOT(transferCompleted(SyncFileItem)), Qt::QueuedConnection);
    connect(_propagator.data(), SIGNAL(progress(Progress::Kind,SyncFileItem,quint64,quint64)),
            this, SLOT(slotProgress(Progress::Kind,SyncFileItem,quint64,quint64)));
    connect(_propagator.data(), SIGNAL(progressChanged(qint64)), this, SLOT(slotProgressChanged(qint64)));
    connect(_propagator.data(), SIGNAL(finished()), this, SLOT(slotFinished()));

    int downloadLimit = 0;
    if (cfg.useDownloadLimit()) {
        downloadLimit = cfg.downloadLimit() * 1000;
    }
    _propagator->_downloadLimit = downloadLimit;

    int uploadLimit = -75; // 75%
    int useUpLimit = cfg.useUploadLimit();
    if ( useUpLimit >= 1) {
        uploadLimit = cfg.uploadLimit() * 1000;
    } else if (useUpLimit == 0) {
        uploadLimit = 0;
    }
    _propagator->_uploadLimit = uploadLimit;

    _propagator->start(_syncedItems);
}
コード例 #3
0
ファイル: csyncthread.cpp プロジェクト: liusijiang/mirall
void CSyncThread::slotUpdateFinished(int updateResult)
{
    if (updateResult < 0 ) {
        handleSyncError(_csync_ctx, "csync_update");
        return;
    }
    qDebug() << "<<#### Update end #################################################### " << _syncTime.elapsed();

    if( csync_reconcile(_csync_ctx) < 0 ) {
        handleSyncError(_csync_ctx, "csync_reconcile");
        return;
    }

    slotProgress(Progress::StartSync, SyncFileItem(), 0, 0);

    _progressInfo = Progress::Info();

    _hasFiles = false;
    bool walkOk = true;
    _seenFiles.clear();

    if( csync_walk_local_tree(_csync_ctx, &treewalkLocal, 0) < 0 ) {
        qDebug() << "Error in local treewalk.";
        walkOk = false;
    }
    if( walkOk && csync_walk_remote_tree(_csync_ctx, &treewalkRemote, 0) < 0 ) {
        qDebug() << "Error in remote treewalk.";
    }

    // Adjust the paths for the renames.
    for (SyncFileItemVector::iterator it = _syncedItems.begin();
            it != _syncedItems.end(); ++it) {
        it->_file = adjustRenamedPath(it->_file);
    }

    if (!_hasFiles && !_syncedItems.isEmpty()) {
        qDebug() << Q_FUNC_INFO << "All the files are going to be removed, asking the user";
        bool cancel = false;
        emit aboutToRemoveAllFiles(_syncedItems.first()._dir, &cancel);
        if (cancel) {
            qDebug() << Q_FUNC_INFO << "Abort sync";
            return;
        }
    }

    if (_needsUpdate)
        emit(started());

    ne_session_s *session = 0;
    // that call to set property actually is a get which will return the session
    // FIXME add a csync_get_module_property to csync

    csync_set_module_property(_csync_ctx, "get_dav_session", &session);
    Q_ASSERT(session);

    _propagator.reset(new OwncloudPropagator (session, _localPath, _remoteUrl, _remotePath,
                                              _journal, &_thread));
    connect(_propagator.data(), SIGNAL(completed(SyncFileItem)),
            this, SLOT(transferCompleted(SyncFileItem)), Qt::QueuedConnection);
    connect(_propagator.data(), SIGNAL(progress(Progress::Kind,SyncFileItem,quint64,quint64)),
            this, SLOT(slotProgress(Progress::Kind,SyncFileItem,quint64,quint64)));
    connect(_propagator.data(), SIGNAL(progressChanged(qint64)), this, SLOT(slotProgressChanged(qint64)));
    connect(_propagator.data(), SIGNAL(finished()), this, SLOT(slotFinished()));

    setNetworkLimits();

    _propagator->start(_syncedItems);
}
コード例 #4
0
slm_machine::slm_machine(QWidget *parent)
    : QMainWindow(parent), ui(new Ui::slm_machineClass)
{
/************************** UI and Buddy Management *******************************/
    ui->setupUi(this);
    setProgressBarVisibility(false);
    //Buddy Management
    buddies = new buddyManager();
    buddies->loadBuddiesAndIPs();
    buddyModel = new QStringListModel();
    buddyModel->setStringList(buddies->AliasBuddyList);

    ui->buddyList->setModel(buddyModel);
    ui->buddyList->setEditTriggers(QAbstractItemView::NoEditTriggers);

    this->setWindowTitle("SLM");

    //UI connections
    connect(ui->addBuddyButton, SIGNAL(clicked()),this, SLOT(addBuddyPressed()));
    connect(ui->removeBuddyButton, SIGNAL(clicked()), this, SLOT(removeBuddypressed()));
    connect(ui->actionExit, SIGNAL(triggered()), this, SLOT(closeApplication()));
    connect(ui->buddyList, SIGNAL(doubleClicked(QModelIndex)), this, SLOT(buddyPressed(QModelIndex)));
    connect(ui->actionAbout_Qt, SIGNAL(triggered()), this, SLOT(aboutQTPressed()));
    connect(ui->actionAbout_SLM, SIGNAL(triggered()), this, SLOT(aboutSLMPressed()));
    connect(ui->actionEncryption_Key, SIGNAL(triggered()), this, SLOT(encryptionKeyPressed()));

/************************************************************************************/

/************************** Message Server Management *******************************/
    messageServer = slm_server::getInstance();
    connect(messageServer, SIGNAL(sendtoUI(QByteArray,QHostAddress)),this,SLOT(messageHandler(QByteArray,QHostAddress)));
/************************************************************************************/

/***************************** File Server Management *******************************/
    onGoingFileTransfer = false;

    FServer = new fileServer();

    //File Server Connections
    connect(FServer,SIGNAL(newDocumentArrived(QString,QString,quint32,quint8)),this,SLOT(incomingFileSlot(QString,QString,quint32,quint8)),Qt::QueuedConnection);
    connect(FServer,SIGNAL(transferCompleted(QString)),this,SLOT(incomingFileTransferCompleted(QString)),Qt::QueuedConnection);
    connect(FServer,SIGNAL(transferCanceled()),this,SLOT(transferIsCancelled()),Qt::QueuedConnection);
    connect(FServer,SIGNAL(ongoingTransfer()),this,SLOT(ongoingTransferExists()),Qt::QueuedConnection);
    connect(FServer,SIGNAL(receivingProgress(quint32)),this,SLOT(updateReceivingProgress(quint32)),Qt::QueuedConnection);

    //Start the File Server Thread
    FServer->start();
/***********************************************************************************/

/***************************** Buddy List Right Click *******************************/
    checkOnline = new QAction(tr("&Check Online"), this);
    checkOnline->setIcon(QIcon(":/icons/CheckOnline"));
    rightClickUserMenu = new QMenu();
    rightClickUserMenu->addAction(checkOnline);
    connect(checkOnline,SIGNAL(triggered()),this,SLOT(checkUserOnline()));
    ui->buddyList->installEventFilter(this);
/***********************************************************************************/

/***************************** Tray Icon Management ********************************/
    //Create tray icon and contex menu actions
    this->createActions();
    this->createTrayIcon();

    //Tray Icon Connections
    connect(trayIcon, SIGNAL(activated(QSystemTrayIcon::ActivationReason)),this, SLOT(iconActivated(QSystemTrayIcon::ActivationReason)));
    connect(this, SIGNAL(signalPlaceToTray()),this, SLOT(slotPlaceToTray()),Qt::QueuedConnection);

    //Show application icon in the tray
    trayIcon->setIcon(QIcon(":/icons/SLM_Logo"));
    trayIcon->setToolTip("SLM (SMG Lan Messenger)");
    trayIcon->show();
/**********************************************************************************/
}