/**
* self_check_write - make sure write succeeded.
* @ubi: UBI device description object
* @buf: buffer with data which were written
* @pnum: physical eraseblock number the data were written to
* @offset: offset within the physical eraseblock the data were written to
* @len: how many bytes were written
*
* This functions reads data which were recently written and compares it with
* the original data buffer - the data have to match. Returns zero if the data
* match and a negative error code if not or in case of failure.
*/
static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
int offset, int len)
{
int err, i;
size_t read;
void *buf1;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
if (!ubi_dbg_chk_io(ubi))
return 0;
buf1 = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
if (!buf1) {
ubi_err("cannot allocate memory to check writes");
return 0;
}
err = mtd_read(ubi->mtd, addr, len, &read, buf1);
if (err && !mtd_is_bitflip(err))
goto out_free;
for (i = 0; i < len; i++) {
uint8_t c = ((uint8_t *)buf)[i];
uint8_t c1 = ((uint8_t *)buf1)[i];
#if !defined(CONFIG_UBI_SILENCE_MSG)
int dump_len = max_t(int, 128, len - i);
#endif
if (c == c1)
continue;
ubi_err("self-check failed for PEB %d:%d, len %d",
pnum, offset, len);
ubi_msg("data differ at position %d", i);
ubi_msg("hex dump of the original buffer from %d to %d",
i, i + dump_len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
buf + i, dump_len, 1);
ubi_msg("hex dump of the read buffer from %d to %d",
i, i + dump_len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
buf1 + i, dump_len, 1);
dump_stack();
err = -EINVAL;
goto out_free;
}
vfree(buf1);
return 0;
out_free:
vfree(buf1);
return err;
}
static int ubi_io_read_vid_hdr(struct ubi_scan_info *ubi, int pnum,
struct ubi_vid_hdr *vh, int unused)
{
u32 magic;
int res;
/* No point in rescanning a corrupt block */
if (test_bit(pnum, ubi->corrupt))
return UBI_IO_BAD_HDR;
/*
* If the block has been scanned already, no need to rescan
*/
if (test_and_set_bit(pnum, ubi->scanned))
return 0;
res = ubi_io_read(ubi, vh, pnum, ubi->vid_offset, sizeof(*vh));
/*
* Bad block, unrecoverable ECC error, skip the block
*/
if (res) {
ubi_dbg("Skipping bad or unreadable block %d", pnum);
vh->magic = 0;
generic_set_bit(pnum, ubi->corrupt);
return res;
}
/* Magic number available ? */
magic = be32_to_cpu(vh->magic);
if (magic != UBI_VID_HDR_MAGIC) {
generic_set_bit(pnum, ubi->corrupt);
if (magic == 0xffffffff)
return UBI_IO_FF;
ubi_msg("Bad magic in block 0%d %08x", pnum, magic);
return UBI_IO_BAD_HDR;
}
/* Header CRC correct ? */
if (crc32(UBI_CRC32_INIT, vh, UBI_VID_HDR_SIZE_CRC) !=
be32_to_cpu(vh->hdr_crc)) {
ubi_msg("Bad CRC in block 0%d", pnum);
generic_set_bit(pnum, ubi->corrupt);
return UBI_IO_BAD_HDR;
}
ubi_dbg("RV: pnum: %i sqnum %llu", pnum, be64_to_cpu(vh->sqnum));
return 0;
}
/* Read one page with oob one time */
int ubi_io_read_oob(const struct ubi_device *ubi, void *databuf, void *oobbuf,
int pnum, int offset)
{
int err;
loff_t addr;
struct mtd_oob_ops ops;
dbg_io("read from PEB %d:%d", pnum, offset);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
ubi_assert(offset >= 0 && offset + ubi->mtd->writesize <= ubi->peb_size);
addr = (loff_t)pnum * ubi->peb_size + offset;
ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = ubi->mtd->oobavail;
ops.oobbuf = oobbuf;
ops.ooboffs = 0;
ops.len = ubi->mtd->writesize;
ops.datbuf = databuf;
ops.retlen = ops.oobretlen = 0;
err = mtd_read_oob(ubi->mtd, addr, &ops);
if (err) {
if (err == -EUCLEAN) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
*
* We do not report about it here unless debugging is
* enabled. A corresponding message will be printed
* later, when it is has been scrubbed.
*/
ubi_msg("fixable bit-flip detected at addr %lld", addr);
if(oobbuf)
ubi_assert(ops.oobretlen == ops.ooblen);
return UBI_IO_BITFLIPS;
}
if (ops.retlen != ops.len && err == -EBADMSG) {
ubi_err("err(%d), retlen(%zu), len(%zu)", err, ops.retlen, ops.len);
dump_stack();
err = -EIO;
}
ubi_msg("mtd_read_oob err %d\n", err);
}
return err;
}
/**
* ubi_dbg_check_all_ff - check that a region of flash is empty.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to check
* @offset: the starting offset within the physical eraseblock to check
* @len: the length of the region to check
*
* This function returns zero if only 0xFF bytes are present at offset
* @offset of the physical eraseblock @pnum, and a negative error code if not
* or if an error occurred.
*/
int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
{
size_t read;
int err;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
mutex_lock(&ubi->dbg_buf_mutex);
err = ubi->mtd->read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
if (err && err != -EUCLEAN) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
goto error;
}
err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
if (err == 0) {
ubi_err("flash region at PEB %d:%d, length %d does not "
"contain all 0xFF bytes", pnum, offset, len);
goto fail;
}
mutex_unlock(&ubi->dbg_buf_mutex);
return 0;
fail:
ubi_err("paranoid check failed for PEB %d", pnum);
ubi_msg("hex dump of the %d-%d region", offset, offset + len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
ubi->dbg_peb_buf, len, 1);
err = -EINVAL;
error:
ubi_dbg_dump_stack();
mutex_unlock(&ubi->dbg_buf_mutex);
return err;
}
int ubi_volume_cdev_add(struct ubi_device *ubi, struct ubi_volume *vol)
{
struct cdev *cdev = &vol->cdev;
struct ubi_volume_cdev_priv *priv;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
priv->vol = vol;
priv->ubi = ubi;
cdev->ops = &ubi_volume_fops;
cdev->name = asprintf("ubi%d.%s", ubi->ubi_num, vol->name);
cdev->priv = priv;
cdev->size = vol->used_bytes;
cdev->dev = &vol->dev;
ubi_msg("registering %s as /dev/%s\n", vol->name, cdev->name);
ret = devfs_create(cdev);
if (ret) {
kfree(priv);
free(cdev->name);
}
list_add_tail(&vol->list, &ubi_volumes_list);
return 0;
}
static void ubi_dump_vol_info_wide(const struct ubi_volume *vol)
{
char name[UBI_VOL_NAME_MAX+1], type[] = "UNKNOWN (%d)XXX";
memset(name, 0, sizeof(name));
if (vol->name_len <= UBI_VOL_NAME_MAX &&
strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
strcpy(name, vol->name);
} else {
strncpy(name, vol->name, 5);
}
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
strcpy(type, "dynamic");
else if (vol->vol_type == UBI_STATIC_VOLUME)
strcpy(type, "static");
else
sprintf(type, "Unknown (%d)", vol->vol_type);
ubi_msg(UBI_LAYOUT_DATA_FMT,
vol->vol_id,
vol->reserved_pebs,
vol->alignment,
vol->data_pad,
type,
vol->usable_leb_size,
vol->used_ebs,
(long)vol->used_bytes,
vol->last_eb_bytes,
vol->corrupted,
vol->upd_marker,
vol->name_len,
name);
}
int ubi_volume_cdev_add(struct ubi_device *ubi, struct ubi_volume *vol)
{
struct cdev *cdev = &vol->cdev;
struct ubi_volume_cdev_priv *priv;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
priv->vol = vol;
priv->ubi = ubi;
cdev->ops = &ubi_volume_fops;
cdev->name = basprintf("%s.%s", ubi->cdev.name, vol->name);
cdev->priv = priv;
cdev->size = vol->used_bytes;
if (vol->vol_type == UBI_STATIC_VOLUME)
cdev->flags = DEVFS_IS_CHARACTER_DEV;
cdev->dev = &vol->dev;
ubi_msg(ubi, "registering %s as /dev/%s", vol->name, cdev->name);
ret = devfs_create(cdev);
if (ret) {
kfree(priv);
free(cdev->name);
}
list_add_tail(&vol->list, &ubi_volumes_list);
return 0;
}
/**
* ubi_dump_flash - dump a region of flash.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to dump
* @offset: the starting offset within the physical eraseblock to dump
* @len: the length of the region to dump
*/
void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
{
int err;
size_t read;
void *buf;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
buf = vmalloc(len);
if (!buf)
return;
err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err && err != -EUCLEAN) {
ubi_err(ubi->ubi_num,
"err %d while reading %d bytes from PEB %d:%d, read %zd bytes",
err, len, pnum, offset, read);
goto out;
}
if (ubi->lookuptbl) {
if (ubi->lookuptbl[pnum]->rc < UBI_MAX_READCOUNTER)
ubi->lookuptbl[pnum]->rc++;
else
ubi_err(ubi->ubi_num,
"read counter overflow at PEB %d, RC %d",
pnum, ubi->lookuptbl[pnum]->rc);
} else
ubi_err(ubi->ubi_num, "Can't update RC. No lookuptbl");
ubi_msg(ubi->ubi_num, "dumping %d bytes of data from PEB %d, offset %d",
len, pnum, offset);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
out:
vfree(buf);
return;
}
static int ubi_remove_vol(char *volume)
{
int err, reserved_pebs, i;
struct ubi_volume *vol;
vol = ubi_find_volume(volume);
if (vol == NULL)
return ENODEV;
if (!strncmp(vol->name, "Factory", 7)) {
printf("Remove volume %s is inhibited\n", vol->name);
return EROFS;
}
printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
if (ubi->ro_mode) {
printf("It's read-only mode\n");
err = EROFS;
goto out_err;
}
err = ubi_change_vtbl_record(ubi, vol->vol_id, NULL);
if (err) {
printf("Error changing Vol tabel record err=%x\n", err);
goto out_err;
}
reserved_pebs = vol->reserved_pebs;
for (i = 0; i < vol->reserved_pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, i);
if (err)
goto out_err;
}
kfree(vol->eba_tbl);
ubi->volumes[vol->vol_id]->eba_tbl = NULL;
ubi->volumes[vol->vol_id] = NULL;
ubi->rsvd_pebs -= reserved_pebs;
ubi->avail_pebs += reserved_pebs;
i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
if (i > 0) {
i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
ubi->avail_pebs -= i;
ubi->rsvd_pebs += i;
ubi->beb_rsvd_pebs += i;
if (i > 0)
ubi_msg("reserve more %d PEBs", i);
}
ubi->vol_count -= 1;
return 0;
out_err:
ubi_err("cannot remove volume %s, error %d", volume, err);
if (err < 0)
err = -err;
return err;
}
void ubi_cdev_remove(struct ubi_device *ubi)
{
struct cdev *cdev = &ubi->cdev;
ubi_msg(ubi, "removing %s", cdev->name);
devfs_remove(cdev);
kfree(cdev->name);
}
/**
* ubi_dbg_check_write - make sure write succeeded.
* @ubi: UBI device description object
* @buf: buffer with data which were written
* @pnum: physical eraseblock number the data were written to
* @offset: offset within the physical eraseblock the data were written to
* @len: how many bytes were written
*
* This functions reads data which were recently written and compares it with
* the original data buffer - the data have to match. Returns zero if the data
* match and a negative error code if not or in case of failure.
*/
int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
int offset, int len)
{
int err, i;
mutex_lock(&ubi->dbg_buf_mutex);
err = ubi_io_read(ubi, ubi->dbg_peb_buf, pnum, offset, len);
if (err)
goto out_unlock;
for (i = 0; i < len; i++) {
uint8_t c = ((uint8_t *)buf)[i];
uint8_t c1 = ((uint8_t *)ubi->dbg_peb_buf)[i];
int dump_len;
if (c == c1)
continue;
ubi_err("paranoid check failed for PEB %d:%d, len %d",
pnum, offset, len);
ubi_msg("data differ at position %d", i);
dump_len = max_t(int, 128, len - i);
ubi_msg("hex dump of the original buffer from %d to %d",
i, i + dump_len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
buf + i, dump_len, 1);
ubi_msg("hex dump of the read buffer from %d to %d",
i, i + dump_len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
ubi->dbg_peb_buf + i, dump_len, 1);
ubi_dbg_dump_stack();
err = -EINVAL;
goto out_unlock;
}
mutex_unlock(&ubi->dbg_buf_mutex);
return 0;
out_unlock:
mutex_unlock(&ubi->dbg_buf_mutex);
return err;
}
int ubispl_load_volumes(struct ubispl_info *info, struct ubispl_load *lvols,
int nrvols)
{
struct ubi_scan_info *ubi = info->ubi;
int res, i, fastmap = info->fastmap;
u32 fsize;
retry:
/*
* We do a partial initializiation of @ubi. Cleaning fm_buf is
* not necessary.
*/
memset(ubi, 0, offsetof(struct ubi_scan_info, fm_buf));
ubi->read = info->read;
/* Precalculate the offsets */
ubi->vid_offset = info->vid_offset;
ubi->leb_start = info->leb_start;
ubi->leb_size = info->peb_size - ubi->leb_start;
ubi->peb_count = info->peb_count;
ubi->peb_offset = info->peb_offset;
fsize = info->peb_size * info->peb_count;
ubi->fsize_mb = fsize >> 20;
/* Fastmap init */
ubi->fm_size = ubi_calc_fm_size(ubi);
ubi->fm_enabled = fastmap;
for (i = 0; i < nrvols; i++) {
struct ubispl_load *lv = lvols + i;
generic_set_bit(lv->vol_id, ubi->toload);
}
ipl_scan(ubi);
for (i = 0; i < nrvols; i++) {
struct ubispl_load *lv = lvols + i;
ubi_msg("Loading VolId #%d", lv->vol_id);
res = ipl_load(ubi, lv->vol_id, lv->load_addr);
if (res < 0) {
if (fastmap) {
fastmap = 0;
goto retry;
}
ubi_warn("Failed");
return res;
}
}
return 0;
}
/**
* ubi_io_read - read data from a physical eraseblock.
* @ubi: UBI device description object
* @buf: buffer where to store the read data
* @pnum: physical eraseblock number to read from
* @offset: offset within the physical eraseblock from where to read
* @len: how many bytes to read
*
* This function reads data from offset @offset of physical eraseblock @pnum
* and stores the read data in the @buf buffer. The following return codes are
* possible:
*
* o %0 if all the requested data were successfully read;
* o %UBI_IO_BITFLIPS if all the requested data were successfully read, but
* correctable bit-flips were detected; this is harmless but may indicate
* that this eraseblock may become bad soon (but do not have to);
* o %-EBADMSG if the MTD subsystem reported about data integrity problems, for
* example it can be an ECC error in case of NAND; this most probably means
* that the data is corrupted;
* o %-EIO if some I/O error occurred;
* o other negative error codes in case of other errors.
*/
int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
int len)
{
int err, retries = 0;
size_t read;
loff_t addr;
dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
ubi_assert(len > 0);
err = paranoid_check_not_bad(ubi, pnum);
if (err)
return err > 0 ? -EINVAL : err;
addr = (loff_t)pnum * ubi->peb_size + offset;
retry:
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
if (err) {
if (err == -EUCLEAN) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
*/
ubi_msg("fixable bit-flip detected at PEB %d", pnum);
ubi_assert(len == read);
return UBI_IO_BITFLIPS;
}
if (read != len && retries++ < UBI_IO_RETRIES) {
dbg_io("error %d while reading %d bytes from PEB %d:%d, "
"read only %zd bytes, retry",
err, len, pnum, offset, read);
yield();
goto retry;
}
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
ubi_dbg_dump_stack();
} else {
ubi_assert(len == read);
if (ubi_dbg_is_bitflip()) {
dbg_msg("bit-flip (emulated)");
err = UBI_IO_BITFLIPS;
}
}
return err;
}
/**
* ubi_detach_mtd_dev - detach an MTD device.
* @ubi_num: UBI device number to detach from
* @anyway: detach MTD even if device reference count is not zero
*
* This function destroys an UBI device number @ubi_num and detaches the
* underlying MTD device. Returns zero in case of success and %-EBUSY if the
* UBI device is busy and cannot be destroyed, and %-EINVAL if it does not
* exist.
*
* Note, the invocations of this function has to be serialized by the
* @ubi_devices_mutex.
*/
int ubi_detach_mtd_dev(int ubi_num, int anyway)
{
struct ubi_device *ubi;
if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
return -EINVAL;
ubi = ubi_get_device(ubi_num);
if (!ubi)
return -EINVAL;
ubi->ref_count--;
if (ubi->ref_count)
return -EBUSY;
ubi_devices[ubi_num] = NULL;
ubi_assert(ubi_num == ubi->ubi_num);
ubi_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
#ifdef CONFIG_MTD_UBI_FASTMAP
/* If we don't write a new fastmap at detach time we lose all
* EC updates that have been made since the last written fastmap. */
ubi_update_fastmap(ubi);
ubi_free_fastmap(ubi);
#endif
uif_close(ubi);
ubi_wl_close(ubi);
ubi_free_internal_volumes(ubi);
vfree(ubi->vtbl);
vfree(ubi->peb_buf);
vfree(ubi->fm_buf);
ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
kfree(ubi);
return 0;
}
int ubi_cdev_add(struct ubi_device *ubi)
{
struct cdev *cdev = &ubi->cdev;
int ret;
cdev->ops = &ubi_fops;
cdev->name = basprintf("%s.ubi", ubi->mtd->cdev.name);
cdev->priv = ubi;
cdev->size = 0;
ubi_msg(ubi, "registering /dev/%s", cdev->name);
ret = devfs_create(cdev);
if (ret)
kfree(cdev->name);
return ret;
}
/**
* autoresize - re-size the volume which has the "auto-resize" flag set.
* @ubi: UBI device description object
* @vol_id: ID of the volume to re-size
*
* This function re-sizes the volume marked by the %UBI_VTBL_AUTORESIZE_FLG in
* the volume table to the largest possible size. See comments in ubi-header.h
* for more description of the flag. Returns zero in case of success and a
* negative error code in case of failure.
*/
static int autoresize(struct ubi_device *ubi, int vol_id)
{
struct ubi_volume_desc desc;
struct ubi_volume *vol = ubi->volumes[vol_id];
int err, old_reserved_pebs = vol->reserved_pebs;
if (ubi->ro_mode) {
ubi_warn("skip auto-resize because of R/O mode");
return 0;
}
/*
* Clear the auto-resize flag in the volume in-memory copy of the
* volume table, and 'ubi_resize_volume()' will propagate this change
* to the flash.
*/
ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
if (ubi->avail_pebs == 0) {
struct ubi_vtbl_record vtbl_rec;
/*
* No available PEBs to re-size the volume, clear the flag on
* flash and exit.
*/
vtbl_rec = ubi->vtbl[vol_id];
err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
if (err)
ubi_err("cannot clean auto-resize flag for volume %d",
vol_id);
} else {
desc.vol = vol;
err = ubi_resize_volume(&desc,
old_reserved_pebs + ubi->avail_pebs);
if (err)
ubi_err("cannot auto-resize volume %d", vol_id);
}
if (err)
return err;
ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id,
vol->name, old_reserved_pebs, vol->reserved_pebs);
return 0;
}
/**
* ubi_self_check_all_ff - check that a region of flash is empty.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to check
* @offset: the starting offset within the physical eraseblock to check
* @len: the length of the region to check
*
* This function returns zero if only 0xFF bytes are present at offset
* @offset of the physical eraseblock @pnum, and a negative error code if not
* or if an error occurred.
*/
int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
{
size_t read;
int err;
void *buf;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
if (!ubi_dbg_chk_io(ubi))
return 0;
buf = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
if (!buf) {
ubi_err(ubi, "cannot allocate memory to check for 0xFFs");
return 0;
}
err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err && !mtd_is_bitflip(err)) {
ubi_err(ubi, "err %d while reading %d bytes from PEB %d:%d, read %zd bytes",
err, len, pnum, offset, read);
goto error;
}
err = ubi_check_pattern(buf, 0xFF, len);
if (err == 0) {
ubi_err(ubi, "flash region at PEB %d:%d, length %d does not contain all 0xFF bytes",
pnum, offset, len);
goto fail;
}
vfree(buf);
return 0;
fail:
ubi_err(ubi, "self-check failed for PEB %d", pnum);
ubi_msg(ubi, "hex dump of the %d-%d region",
offset, offset + len);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
err = -EINVAL;
error:
dump_stack();
vfree(buf);
return err;
}
/**
* ubi_dump_flash - dump a region of flash.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to dump
* @offset: the starting offset within the physical eraseblock to dump
* @len: the length of the region to dump
*/
void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
{
int err;
size_t read;
void *buf;
loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
buf = vmalloc(len);
if (!buf)
return;
err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err && err != -EUCLEAN) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
goto out;
}
ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
len, pnum, offset);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
out:
vfree(buf);
return;
}
static void display_volume_info_wide(struct ubi_device *ubi)
{
int i;
ubi_msg(UBI_LAYOUT_HEAD_FMT,
"vol_id",
"reserved_pebs",
"alignment",
"data_pad",
"vol_type",
"usable_leb_size",
"used_ebs",
"used_bytes",
"last_eb_bytes",
"corrupted",
"upd_marker",
"name_len",
"name");
for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
if (!ubi->volumes[i])
continue; /* Empty record */
ubi_dump_vol_info_wide(ubi->volumes[i]);
}
}
static void display_ubi_info(struct ubi_device *ubi)
{
ubi_msg("MTD device name: \"%s\"", ubi->mtd->name);
ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20);
ubi_msg("physical eraseblock size: %d bytes (%d KiB)",
ubi->peb_size, ubi->peb_size >> 10);
ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size);
ubi_msg("number of good PEBs: %d", ubi->good_peb_count);
ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count);
ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size);
ubi_msg("VID header offset: %d (aligned %d)",
ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
ubi_msg("data offset: %d", ubi->leb_start);
ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots);
ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD);
ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
ubi_msg("number of user volumes: %d",
ubi->vol_count - UBI_INT_VOL_COUNT);
ubi_msg("available PEBs: %d", ubi->avail_pebs);
ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
ubi_msg("number of PEBs reserved for bad PEB handling: %d",
ubi->beb_rsvd_pebs);
ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
}
/**
* torture_peb - test a supposedly bad physical eraseblock.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to test
*
* This function returns %-EIO if the physical eraseblock did not pass the
* test, a positive number of erase operations done if the test was
* successfully passed, and other negative error codes in case of other errors.
*/
static int torture_peb(struct ubi_device *ubi, int pnum)
{
int err, i, patt_count;
ubi_msg(ubi, "run torture test for PEB %d", pnum);
patt_count = ARRAY_SIZE(patterns);
ubi_assert(patt_count > 0);
mutex_lock(&ubi->buf_mutex);
for (i = 0; i < patt_count; i++) {
err = do_sync_erase(ubi, pnum);
if (err)
goto out;
/* Make sure the PEB contains only 0xFF bytes */
err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
if (err)
goto out;
err = ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->peb_size);
if (err == 0) {
ubi_err(ubi, "erased PEB %d, but a non-0xFF byte found",
pnum);
err = -EIO;
goto out;
}
/* Write a pattern and check it */
memset(ubi->peb_buf, patterns[i], ubi->peb_size);
err = ubi_io_write(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
if (err)
goto out;
memset(ubi->peb_buf, ~patterns[i], ubi->peb_size);
err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
if (err)
goto out;
err = ubi_check_pattern(ubi->peb_buf, patterns[i],
ubi->peb_size);
if (err == 0) {
ubi_err(ubi, "pattern %x checking failed for PEB %d",
patterns[i], pnum);
err = -EIO;
goto out;
}
}
err = patt_count;
ubi_msg(ubi, "PEB %d passed torture test, do not mark it as bad", pnum);
out:
mutex_unlock(&ubi->buf_mutex);
if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* If a bit-flip or data integrity error was detected, the test
* has not passed because it happened on a freshly erased
* physical eraseblock which means something is wrong with it.
*/
ubi_err(ubi, "read problems on freshly erased PEB %d, must be bad",
pnum);
err = -EIO;
}
return err;
}
/**
* ubi_io_read - read data from a physical eraseblock.
* @ubi: UBI device description object
* @buf: buffer where to store the read data
* @pnum: physical eraseblock number to read from
* @offset: offset within the physical eraseblock from where to read
* @len: how many bytes to read
*
* This function reads data from offset @offset of physical eraseblock @pnum
* and stores the read data in the @buf buffer. The following return codes are
* possible:
*
* o %0 if all the requested data were successfully read;
* o %UBI_IO_BITFLIPS if all the requested data were successfully read, but
* correctable bit-flips were detected; this is harmless but may indicate
* that this eraseblock may become bad soon (but do not have to);
* o %-EBADMSG if the MTD subsystem reported about data integrity problems, for
* example it can be an ECC error in case of NAND; this most probably means
* that the data is corrupted;
* o %-EIO if some I/O error occurred;
* o other negative error codes in case of other errors.
*/
int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
int len)
{
int err, retries = 0;
size_t read;
loff_t addr;
dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
ubi_assert(len > 0);
err = self_check_not_bad(ubi, pnum);
if (err)
return err;
/*
* Deliberately corrupt the buffer to improve robustness. Indeed, if we
* do not do this, the following may happen:
* 1. The buffer contains data from previous operation, e.g., read from
* another PEB previously. The data looks like expected, e.g., if we
* just do not read anything and return - the caller would not
* notice this. E.g., if we are reading a VID header, the buffer may
* contain a valid VID header from another PEB.
* 2. The driver is buggy and returns us success or -EBADMSG or
* -EUCLEAN, but it does not actually put any data to the buffer.
*
* This may confuse UBI or upper layers - they may think the buffer
* contains valid data while in fact it is just old data. This is
* especially possible because UBI (and UBIFS) relies on CRC, and
* treats data as correct even in case of ECC errors if the CRC is
* correct.
*
* Try to prevent this situation by changing the first byte of the
* buffer.
*/
*((uint8_t *)buf) ^= 0xFF;
addr = (loff_t)pnum * ubi->peb_size + offset;
retry:
err = mtd_read(ubi->mtd, addr, len, &read, buf);
if (err) {
const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
if (mtd_is_bitflip(err)) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
*
* We do not report about it here unless debugging is
* enabled. A corresponding message will be printed
* later, when it is has been scrubbed.
*/
ubi_msg(ubi, "fixable bit-flip detected at PEB %d",
pnum);
ubi_assert(len == read);
return UBI_IO_BITFLIPS;
}
if (retries++ < UBI_IO_RETRIES) {
ubi_warn(ubi, "error %d%s while reading %d bytes from PEB %d:%d, read only %zd bytes, retry",
err, errstr, len, pnum, offset, read);
yield();
goto retry;
}
ubi_err(ubi, "error %d%s while reading %d bytes from PEB %d:%d, read %zd bytes",
err, errstr, len, pnum, offset, read);
dump_stack();
/*
* The driver should never return -EBADMSG if it failed to read
* all the requested data. But some buggy drivers might do
* this, so we change it to -EIO.
*/
if (read != len && mtd_is_eccerr(err)) {
ubi_assert(0);
err = -EIO;
}
} else {
ubi_assert(len == read);
if (ubi_dbg_is_bitflip(ubi)) {
dbg_gen("bit-flip (emulated)");
err = UBI_IO_BITFLIPS;
}
}
return err;
}
static int ubi_remove_vol(char *volume)
{
int i, err, reserved_pebs;
int found = 0, vol_id = 0;
struct ubi_volume *vol;
for (i = 0; i < ubi->vtbl_slots; i++) {
vol = ubi->volumes[i];
if (vol && !strcmp(vol->name, volume)) {
printf("Volume %s found at valid %d\n", volume, i);
vol_id = i;
found = 1;
break;
}
}
if (!found) {
printf("%s volume not found\n", volume);
return -ENODEV;
}
printf("remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
if (ubi->ro_mode) {
printf("It's read-only mode\n");
err = -EROFS;
goto out_err;
}
err = ubi_change_vtbl_record(ubi, vol_id, NULL);
if (err) {
printf("Error changing Vol tabel record err=%x\n", err);
goto out_err;
}
reserved_pebs = vol->reserved_pebs;
for (i = 0; i < vol->reserved_pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, i);
if (err)
goto out_err;
}
kfree(vol->eba_tbl);
ubi->volumes[vol_id]->eba_tbl = NULL;
ubi->volumes[vol_id] = NULL;
ubi->rsvd_pebs -= reserved_pebs;
ubi->avail_pebs += reserved_pebs;
i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
if (i > 0) {
i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
ubi->avail_pebs -= i;
ubi->rsvd_pebs += i;
ubi->beb_rsvd_pebs += i;
if (i > 0)
ubi_msg("reserve more %d PEBs", i);
}
ubi->vol_count -= 1;
return 0;
out_err:
ubi_err("cannot remove volume %d, error %d", vol_id, err);
return err;
}
/**
* io_init - initialize I/O sub-system for a given UBI device.
* @ubi: UBI device description object
* @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
*
* If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
* assumed:
* o EC header is always at offset zero - this cannot be changed;
* o VID header starts just after the EC header at the closest address
* aligned to @io->hdrs_min_io_size;
* o data starts just after the VID header at the closest address aligned to
* @io->min_io_size
*
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
static int io_init(struct ubi_device *ubi, int max_beb_per1024)
{
dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
if (ubi->mtd->numeraseregions != 0) {
/*
* Some flashes have several erase regions. Different regions
* may have different eraseblock size and other
* characteristics. It looks like mostly multi-region flashes
* have one "main" region and one or more small regions to
* store boot loader code or boot parameters or whatever. I
* guess we should just pick the largest region. But this is
* not implemented.
*/
ubi_err("multiple regions, not implemented");
return -EINVAL;
}
if (ubi->vid_hdr_offset < 0)
return -EINVAL;
/*
* Note, in this implementation we support MTD devices with 0x7FFFFFFF
* physical eraseblocks maximum.
*/
ubi->peb_size = ubi->mtd->erasesize;
ubi->peb_count = mtd_div_by_eb(ubi->mtd->size, ubi->mtd);
ubi->flash_size = ubi->mtd->size;
if (mtd_can_have_bb(ubi->mtd)) {
ubi->bad_allowed = 1;
ubi->bad_peb_limit = get_bad_peb_limit(ubi, max_beb_per1024);
}
if (ubi->mtd->type == MTD_NORFLASH) {
ubi_assert(ubi->mtd->writesize == 1);
ubi->nor_flash = 1;
}
ubi->min_io_size = ubi->mtd->writesize;
ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
/*
* Make sure minimal I/O unit is power of 2. Note, there is no
* fundamental reason for this assumption. It is just an optimization
* which allows us to avoid costly division operations.
*/
if (!is_power_of_2(ubi->min_io_size)) {
ubi_err("min. I/O unit (%d) is not power of 2",
ubi->min_io_size);
return -EINVAL;
}
ubi_assert(ubi->hdrs_min_io_size > 0);
ubi_assert(ubi->hdrs_min_io_size <= ubi->min_io_size);
ubi_assert(ubi->min_io_size % ubi->hdrs_min_io_size == 0);
ubi->max_write_size = ubi->mtd->writesize; /* FIXME: writebufsize */
/*
* Maximum write size has to be greater or equivalent to min. I/O
* size, and be multiple of min. I/O size.
*/
if (ubi->max_write_size < ubi->min_io_size ||
ubi->max_write_size % ubi->min_io_size ||
!is_power_of_2(ubi->max_write_size)) {
ubi_err("bad write buffer size %d for %d min. I/O unit",
ubi->max_write_size, ubi->min_io_size);
return -EINVAL;
}
/* Calculate default aligned sizes of EC and VID headers */
ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size);
ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size);
dbg_gen("min_io_size %d", ubi->min_io_size);
dbg_gen("max_write_size %d", ubi->max_write_size);
dbg_gen("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
dbg_gen("ec_hdr_alsize %d", ubi->ec_hdr_alsize);
dbg_gen("vid_hdr_alsize %d", ubi->vid_hdr_alsize);
if (ubi->vid_hdr_offset == 0)
/* Default offset */
ubi->vid_hdr_offset = ubi->vid_hdr_aloffset =
ubi->ec_hdr_alsize;
else {
ubi->vid_hdr_aloffset = ubi->vid_hdr_offset &
~(ubi->hdrs_min_io_size - 1);
ubi->vid_hdr_shift = ubi->vid_hdr_offset -
ubi->vid_hdr_aloffset;
}
/* Similar for the data offset */
ubi->leb_start = ubi->vid_hdr_offset + UBI_VID_HDR_SIZE;
ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);
dbg_gen("vid_hdr_offset %d", ubi->vid_hdr_offset);
dbg_gen("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
dbg_gen("vid_hdr_shift %d", ubi->vid_hdr_shift);
dbg_gen("leb_start %d", ubi->leb_start);
/* The shift must be aligned to 32-bit boundary */
if (ubi->vid_hdr_shift % 4) {
ubi_err("unaligned VID header shift %d",
ubi->vid_hdr_shift);
return -EINVAL;
}
/* Check sanity */
if (ubi->vid_hdr_offset < UBI_EC_HDR_SIZE ||
ubi->leb_start < ubi->vid_hdr_offset + UBI_VID_HDR_SIZE ||
ubi->leb_start > ubi->peb_size - UBI_VID_HDR_SIZE ||
ubi->leb_start & (ubi->min_io_size - 1)) {
ubi_err("bad VID header (%d) or data offsets (%d)",
ubi->vid_hdr_offset, ubi->leb_start);
return -EINVAL;
}
/*
* Set maximum amount of physical erroneous eraseblocks to be 10%.
* Erroneous PEB are those which have read errors.
*/
ubi->max_erroneous = ubi->peb_count / 10;
if (ubi->max_erroneous < 16)
ubi->max_erroneous = 16;
dbg_gen("max_erroneous %d", ubi->max_erroneous);
/*
* It may happen that EC and VID headers are situated in one minimal
* I/O unit. In this case we can only accept this UBI image in
* read-only mode.
*/
if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) {
ubi_warn("EC and VID headers are in the same minimal I/O unit, switch to read-only mode");
ubi->ro_mode = 1;
}
ubi->leb_size = ubi->peb_size - ubi->leb_start;
if (!(ubi->mtd->flags & MTD_WRITEABLE)) {
ubi_msg("MTD device %d is write-protected, attach in read-only mode",
ubi->mtd->index);
ubi->ro_mode = 1;
}
/*
* Note, ideally, we have to initialize @ubi->bad_peb_count here. But
* unfortunately, MTD does not provide this information. We should loop
* over all physical eraseblocks and invoke mtd->block_is_bad() for
* each physical eraseblock. So, we leave @ubi->bad_peb_count
* uninitialized so far.
*/
return 0;
}
static int ubi_scan_fastmap(struct ubi_scan_info *ubi,
struct ubi_attach_info *ai,
int fm_anchor)
{
struct ubi_fm_sb *fmsb, *fmsb2;
struct ubi_vid_hdr *vh;
struct ubi_fastmap_layout *fm;
int i, used_blocks, pnum, ret = 0;
size_t fm_size;
__be32 crc, tmp_crc;
unsigned long long sqnum = 0;
fmsb = &ubi->fm_sb;
fm = &ubi->fm_layout;
ret = ubi_io_read(ubi, fmsb, fm_anchor, ubi->leb_start, sizeof(*fmsb));
if (ret && ret != UBI_IO_BITFLIPS)
goto free_fm_sb;
else if (ret == UBI_IO_BITFLIPS)
fm->to_be_tortured[0] = 1;
if (be32_to_cpu(fmsb->magic) != UBI_FM_SB_MAGIC) {
ubi_err("bad super block magic: 0x%x, expected: 0x%x",
be32_to_cpu(fmsb->magic), UBI_FM_SB_MAGIC);
ret = UBI_BAD_FASTMAP;
goto free_fm_sb;
}
if (fmsb->version != UBI_FM_FMT_VERSION) {
ubi_err("bad fastmap version: %i, expected: %i",
fmsb->version, UBI_FM_FMT_VERSION);
ret = UBI_BAD_FASTMAP;
goto free_fm_sb;
}
used_blocks = be32_to_cpu(fmsb->used_blocks);
if (used_blocks > UBI_FM_MAX_BLOCKS || used_blocks < 1) {
ubi_err("number of fastmap blocks is invalid: %i", used_blocks);
ret = UBI_BAD_FASTMAP;
goto free_fm_sb;
}
fm_size = ubi->leb_size * used_blocks;
if (fm_size != ubi->fm_size) {
ubi_err("bad fastmap size: %zi, expected: %zi", fm_size,
ubi->fm_size);
ret = UBI_BAD_FASTMAP;
goto free_fm_sb;
}
vh = &ubi->fm_vh;
for (i = 0; i < used_blocks; i++) {
pnum = be32_to_cpu(fmsb->block_loc[i]);
if (ubi_io_is_bad(ubi, pnum)) {
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
#ifdef LATER
int image_seq;
ret = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
if (ret && ret != UBI_IO_BITFLIPS) {
ubi_err("unable to read fastmap block# %i EC (PEB: %i)",
i, pnum);
if (ret > 0)
ret = UBI_BAD_FASTMAP;
goto free_hdr;
} else if (ret == UBI_IO_BITFLIPS)
fm->to_be_tortured[i] = 1;
image_seq = be32_to_cpu(ech->image_seq);
if (!ubi->image_seq)
ubi->image_seq = image_seq;
/*
* Older UBI implementations have image_seq set to zero, so
* we shouldn't fail if image_seq == 0.
*/
if (image_seq && (image_seq != ubi->image_seq)) {
ubi_err("wrong image seq:%d instead of %d",
be32_to_cpu(ech->image_seq), ubi->image_seq);
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
#endif
ret = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
if (ret && ret != UBI_IO_BITFLIPS) {
ubi_err("unable to read fastmap block# %i (PEB: %i)",
i, pnum);
goto free_hdr;
}
/*
* Mainline code rescans the anchor header. We've done
* that already so we merily copy it over.
*/
if (pnum == fm_anchor)
memcpy(vh, ubi->blockinfo + pnum, sizeof(*fm));
if (i == 0) {
if (be32_to_cpu(vh->vol_id) != UBI_FM_SB_VOLUME_ID) {
ubi_err("bad fastmap anchor vol_id: 0x%x," \
" expected: 0x%x",
be32_to_cpu(vh->vol_id),
UBI_FM_SB_VOLUME_ID);
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
} else {
if (be32_to_cpu(vh->vol_id) != UBI_FM_DATA_VOLUME_ID) {
ubi_err("bad fastmap data vol_id: 0x%x," \
" expected: 0x%x",
be32_to_cpu(vh->vol_id),
UBI_FM_DATA_VOLUME_ID);
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
}
if (sqnum < be64_to_cpu(vh->sqnum))
sqnum = be64_to_cpu(vh->sqnum);
ret = ubi_io_read(ubi, ubi->fm_buf + (ubi->leb_size * i), pnum,
ubi->leb_start, ubi->leb_size);
if (ret && ret != UBI_IO_BITFLIPS) {
ubi_err("unable to read fastmap block# %i (PEB: %i, " \
"err: %i)", i, pnum, ret);
goto free_hdr;
}
}
fmsb2 = (struct ubi_fm_sb *)(ubi->fm_buf);
tmp_crc = be32_to_cpu(fmsb2->data_crc);
fmsb2->data_crc = 0;
crc = crc32(UBI_CRC32_INIT, ubi->fm_buf, fm_size);
if (crc != tmp_crc) {
ubi_err("fastmap data CRC is invalid");
ubi_err("CRC should be: 0x%x, calc: 0x%x", tmp_crc, crc);
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
fmsb2->sqnum = sqnum;
fm->used_blocks = used_blocks;
ret = ubi_attach_fastmap(ubi, ai, fm);
if (ret) {
if (ret > 0)
ret = UBI_BAD_FASTMAP;
goto free_hdr;
}
ubi->fm = fm;
ubi->fm_pool.max_size = ubi->fm->max_pool_size;
ubi->fm_wl_pool.max_size = ubi->fm->max_wl_pool_size;
ubi_msg("attached by fastmap %uMB %u blocks",
ubi->fsize_mb, ubi->peb_count);
ubi_dbg("fastmap pool size: %d", ubi->fm_pool.max_size);
ubi_dbg("fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
out:
if (ret)
ubi_err("Attach by fastmap failed, doing a full scan!");
return ret;
free_hdr:
free_fm_sb:
goto out;
}
static void ubi_dump_vol_info(const struct ubi_volume *vol)
{
ubi_msg("volume information dump:");
ubi_msg("vol_id %d", vol->vol_id);
ubi_msg("reserved_pebs %d", vol->reserved_pebs);
ubi_msg("alignment %d", vol->alignment);
ubi_msg("data_pad %d", vol->data_pad);
ubi_msg("vol_type %d", vol->vol_type);
ubi_msg("name_len %d", vol->name_len);
ubi_msg("usable_leb_size %d", vol->usable_leb_size);
ubi_msg("used_ebs %d", vol->used_ebs);
ubi_msg("used_bytes %lld", vol->used_bytes);
ubi_msg("last_eb_bytes %d", vol->last_eb_bytes);
ubi_msg("corrupted %d", vol->corrupted);
ubi_msg("upd_marker %d", vol->upd_marker);
if (vol->name_len <= UBI_VOL_NAME_MAX &&
strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
ubi_msg("name %s", vol->name);
} else {
ubi_msg("the 1st 5 characters of the name: %c%c%c%c%c",
vol->name[0], vol->name[1], vol->name[2],
vol->name[3], vol->name[4]);
}
printf("\n");
}
/**
* ubi_io_read - read data from a physical eraseblock.
* @ubi: UBI device description object
* @buf: buffer where to store the read data
* @pnum: physical eraseblock number to read from
* @offset: offset within the physical eraseblock from where to read
* @len: how many bytes to read
*
* This function reads data from offset @offset of physical eraseblock @pnum
* and stores the read data in the @buf buffer. The following return codes are
* possible:
*
* o %0 if all the requested data were successfully read;
* o %UBI_IO_BITFLIPS if all the requested data were successfully read, but
* correctable bit-flips were detected; this is harmless but may indicate
* that this eraseblock may become bad soon (but do not have to);
* o %-EBADMSG if the MTD subsystem reported about data integrity problems, for
* example it can be an ECC error in case of NAND; this most probably means
* that the data is corrupted;
* o %-EIO if some I/O error occurred;
* o other negative error codes in case of other errors.
*/
int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
int len)
{
int err, retries = 0;
size_t read;
loff_t addr;
dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
ubi_assert(len > 0);
err = paranoid_check_not_bad(ubi, pnum);
if (err)
return err > 0 ? -EINVAL : err;
addr = (loff_t)pnum * ubi->peb_size + offset;
retry:
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
if (err) {
if (err == -EUCLEAN) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
*/
ubi_msg("fixable bit-flip detected at PEB %d", pnum);
ubi_assert(len == read);
return UBI_IO_BITFLIPS;
}
if (read != len && retries++ < UBI_IO_RETRIES) {
dbg_io("error %d while reading %d bytes from PEB %d:%d, "
"read only %zd bytes, retry",
err, len, pnum, offset, read);
yield();
goto retry;
}
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
ubi_dbg_dump_stack();
/*
* The driver should never return -EBADMSG if it failed to read
* all the requested data. But some buggy drivers might do
* this, so we change it to -EIO.
*/
if (read != len && err == -EBADMSG) {
ubi_assert(0);
printk("%s[%d] not here\n", __func__, __LINE__);
/* err = -EIO; */
}
} else {
ubi_assert(len == read);
if (ubi_dbg_is_bitflip()) {
dbg_msg("bit-flip (emulated)");
err = UBI_IO_BITFLIPS;
}
}
return err;
}
/**
* ubi_attach_mtd_dev - attach an MTD device.
* @mtd: MTD device description object
* @ubi_num: number to assign to the new UBI device
* @vid_hdr_offset: VID header offset
* @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
*
* This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
* to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
* which case this function finds a vacant device number and assigns it
* automatically. Returns the new UBI device number in case of success and a
* negative error code in case of failure.
*
* Note, the invocations of this function has to be serialized by the
* @ubi_devices_mutex.
*/
int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
int vid_hdr_offset, int max_beb_per1024)
{
struct ubi_device *ubi;
int i, err, ref = 0;
if (max_beb_per1024 < 0 || max_beb_per1024 > MAX_MTD_UBI_BEB_LIMIT)
return -EINVAL;
if (!max_beb_per1024)
max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT;
/*
* Check if we already have the same MTD device attached.
*
* Note, this function assumes that UBI devices creations and deletions
* are serialized, so it does not take the &ubi_devices_lock.
*/
for (i = 0; i < UBI_MAX_DEVICES; i++) {
ubi = ubi_devices[i];
if (ubi && mtd == ubi->mtd) {
ubi_err("mtd%d is already attached to ubi%d",
mtd->index, i);
return -EEXIST;
}
}
/*
* Make sure this MTD device is not emulated on top of an UBI volume
* already. Well, generally this recursion works fine, but there are
* different problems like the UBI module takes a reference to itself
* by attaching (and thus, opening) the emulated MTD device. This
* results in inability to unload the module. And in general it makes
* no sense to attach emulated MTD devices, so we prohibit this.
*/
if (mtd->type == MTD_UBIVOLUME) {
ubi_err("refuse attaching mtd%d - it is already emulated on top of UBI",
mtd->index);
return -EINVAL;
}
if (ubi_num == UBI_DEV_NUM_AUTO) {
/* Search for an empty slot in the @ubi_devices array */
for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++)
if (!ubi_devices[ubi_num])
break;
if (ubi_num == UBI_MAX_DEVICES) {
ubi_err("only %d UBI devices may be created",
UBI_MAX_DEVICES);
return -ENFILE;
}
} else {
if (ubi_num >= UBI_MAX_DEVICES)
return -EINVAL;
/* Make sure ubi_num is not busy */
if (ubi_devices[ubi_num]) {
ubi_err("ubi%d already exists", ubi_num);
return -EEXIST;
}
}
ubi = kzalloc(sizeof(struct ubi_device), GFP_KERNEL);
if (!ubi)
return -ENOMEM;
ubi->mtd = mtd;
ubi->ubi_num = ubi_num;
ubi->vid_hdr_offset = vid_hdr_offset;
ubi->autoresize_vol_id = -1;
#ifdef CONFIG_MTD_UBI_FASTMAP
ubi->fm_pool.used = ubi->fm_pool.size = 0;
ubi->fm_wl_pool.used = ubi->fm_wl_pool.size = 0;
/*
* fm_pool.max_size is 5% of the total number of PEBs but it's also
* between UBI_FM_MAX_POOL_SIZE and UBI_FM_MIN_POOL_SIZE.
*/
ubi->fm_pool.max_size = min(((int)mtd_div_by_eb(ubi->mtd->size,
ubi->mtd) / 100) * 5, UBI_FM_MAX_POOL_SIZE);
if (ubi->fm_pool.max_size < UBI_FM_MIN_POOL_SIZE)
ubi->fm_pool.max_size = UBI_FM_MIN_POOL_SIZE;
ubi->fm_wl_pool.max_size = UBI_FM_WL_POOL_SIZE;
ubi->fm_disabled = !fm_autoconvert;
if (!ubi->fm_disabled && (int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd)
<= UBI_FM_MAX_START) {
ubi_err("More than %i PEBs are needed for fastmap, sorry.",
UBI_FM_MAX_START);
ubi->fm_disabled = 1;
}
ubi_debug("default fastmap pool size: %d", ubi->fm_pool.max_size);
ubi_debug("default fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
#else
ubi->fm_disabled = 1;
#endif
ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
err = io_init(ubi, max_beb_per1024);
if (err)
goto out_free;
err = -ENOMEM;
ubi->peb_buf = vmalloc(ubi->peb_size);
if (!ubi->peb_buf)
goto out_free;
#ifdef CONFIG_MTD_UBI_FASTMAP
ubi->fm_size = ubi_calc_fm_size(ubi);
ubi->fm_buf = kzalloc(ubi->fm_size, GFP_KERNEL);
if (!ubi->fm_buf)
goto out_free;
#endif
err = ubi_attach(ubi, 0);
if (err) {
ubi_err("failed to attach mtd%d, error %d", mtd->index, err);
goto out_free;
}
if (ubi->autoresize_vol_id != -1) {
err = autoresize(ubi, ubi->autoresize_vol_id);
if (err)
goto out_detach;
}
err = uif_init(ubi, &ref);
if (err)
goto out_detach;
ubi_msg("attached mtd%d (name \"%s\", size %llu MiB) to ubi%d",
mtd->index, mtd->name, ubi->flash_size >> 20, ubi_num);
ubi_debug("PEB size: %d bytes (%d KiB), LEB size: %d bytes",
ubi->peb_size, ubi->peb_size >> 10, ubi->leb_size);
ubi_debug("min./max. I/O unit sizes: %d/%d, sub-page size %d",
ubi->min_io_size, ubi->max_write_size, ubi->hdrs_min_io_size);
ubi_debug("VID header offset: %d (aligned %d), data offset: %d",
ubi->vid_hdr_offset, ubi->vid_hdr_aloffset, ubi->leb_start);
ubi_debug("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d",
ubi->good_peb_count, ubi->bad_peb_count, ubi->corr_peb_count);
ubi_debug("user volume: %d, internal volumes: %d, max. volumes count: %d",
ubi->vol_count - UBI_INT_VOL_COUNT, UBI_INT_VOL_COUNT,
ubi->vtbl_slots);
ubi_debug("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u",
ubi->max_ec, ubi->mean_ec, CONFIG_MTD_UBI_WL_THRESHOLD,
ubi->image_seq);
ubi_debug("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d",
ubi->avail_pebs, ubi->rsvd_pebs, ubi->beb_rsvd_pebs);
dev_add_param_int_ro(&ubi->dev, "peb_size", ubi->peb_size, "%d");
dev_add_param_int_ro(&ubi->dev, "leb_size", ubi->leb_size, "%d");
dev_add_param_int_ro(&ubi->dev, "vid_header_offset", ubi->vid_hdr_offset, "%d");
dev_add_param_int_ro(&ubi->dev, "min_io_size", ubi->min_io_size, "%d");
dev_add_param_int_ro(&ubi->dev, "sub_page_size", ubi->hdrs_min_io_size, "%d");
dev_add_param_int_ro(&ubi->dev, "good_peb_count", ubi->good_peb_count, "%d");
dev_add_param_int_ro(&ubi->dev, "bad_peb_count", ubi->bad_peb_count, "%d");
dev_add_param_int_ro(&ubi->dev, "max_erase_counter", ubi->max_ec, "%d");
dev_add_param_int_ro(&ubi->dev, "mean_erase_counter", ubi->mean_ec, "%d");
dev_add_param_int_ro(&ubi->dev, "available_pebs", ubi->avail_pebs, "%d");
dev_add_param_int_ro(&ubi->dev, "reserved_pebs", ubi->rsvd_pebs, "%d");
/*
* The below lock makes sure we do not race with 'ubi_thread()' which
* checks @ubi->thread_enabled. Otherwise we may fail to wake it up.
*/
ubi->thread_enabled = 1;
wake_up_process(ubi->bgt_thread);
ubi_devices[ubi_num] = ubi;
return ubi_num;
out_detach:
ubi_wl_close(ubi);
ubi_free_internal_volumes(ubi);
vfree(ubi->vtbl);
out_free:
vfree(ubi->peb_buf);
vfree(ubi->fm_buf);
kfree(ubi);
return err;
}
