/*
* Helper function to handle changes to the PWM clock control registers.
*/
static void
pwm_configure_clock(uint16_t map, uint16_t clock_MHz)
{
for (unsigned group = 0; group < PX4IO_SERVO_COUNT; group++) {
uint32_t mask = up_pwm_servo_get_rate_group(group);
if ((map & mask) != 0) {
if (up_pwm_servo_set_rate_group_clock(group, clock_MHz) != OK) {
r_status_alarms |= PX4IO_P_STATUS_ALARMS_PWM_ERROR;
}
}
}
}
int
PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate)
{
debug("set_pwm_rate %x %u %u", rate_map, default_rate, alt_rate);
for (unsigned pass = 0; pass < 2; pass++) {
for (unsigned group = 0; group < _max_actuators; group++) {
// get the channel mask for this rate group
uint32_t mask = up_pwm_servo_get_rate_group(group);
if (mask == 0)
continue;
// all channels in the group must be either default or alt-rate
uint32_t alt = rate_map & mask;
if (pass == 0) {
// preflight
if ((alt != 0) && (alt != mask)) {
warn("rate group %u mask %x bad overlap %x", group, mask, alt);
// not a legal map, bail
return -EINVAL;
}
} else {
// set it - errors here are unexpected
if (alt != 0) {
if (up_pwm_servo_set_rate_group_update(group, _pwm_alt_rate) != OK) {
warn("rate group set alt failed");
return -EINVAL;
}
} else {
if (up_pwm_servo_set_rate_group_update(group, _pwm_default_rate) != OK) {
warn("rate group set default failed");
return -EINVAL;
}
}
}
}
}
_pwm_alt_rate_channels = rate_map;
_pwm_default_rate = default_rate;
_pwm_alt_rate = alt_rate;
return OK;
}
/*
* Helper function to handle changes to the PWM rate control registers.
*/
static void
pwm_configure_rates(uint16_t map, uint16_t defaultrate, uint16_t altrate)
{
for (unsigned pass = 0; pass < 2; pass++) {
for (unsigned group = 0; group < PX4IO_SERVO_COUNT; group++) {
/* get the channel mask for this rate group */
uint32_t mask = up_pwm_servo_get_rate_group(group);
if (mask == 0) {
continue;
}
/* all channels in the group must be either default or alt-rate */
uint32_t alt = map & mask;
if (pass == 0) {
/* preflight */
if ((alt != 0) && (alt != mask)) {
/* not a legal map, bail with an alarm */
r_status_alarms |= PX4IO_P_STATUS_ALARMS_PWM_ERROR;
return;
}
} else {
/* set it - errors here are unexpected */
if (alt != 0) {
if (up_pwm_servo_set_rate_group_update(group, r_setup_pwm_altrate) != OK) {
r_status_alarms |= PX4IO_P_STATUS_ALARMS_PWM_ERROR;
}
} else {
if (up_pwm_servo_set_rate_group_update(group, r_setup_pwm_defaultrate) != OK) {
r_status_alarms |= PX4IO_P_STATUS_ALARMS_PWM_ERROR;
}
}
}
}
}
r_setup_pwm_rates = map;
r_setup_pwm_defaultrate = defaultrate;
r_setup_pwm_altrate = altrate;
}
int
registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_values)
{
#define SELECT_PAGE(_page_name) \
do { \
*values = (uint16_t *)&_page_name[0]; \
*num_values = sizeof(_page_name) / sizeof(_page_name[0]); \
} while(0)
switch (page) {
/*
* Handle pages that are updated dynamically at read time.
*/
case PX4IO_PAGE_STATUS:
/* PX4IO_P_STATUS_FREEMEM */
{
struct mallinfo minfo = mallinfo();
r_page_status[PX4IO_P_STATUS_FREEMEM] = minfo.fordblks;
}
/* XXX PX4IO_P_STATUS_CPULOAD */
/* PX4IO_P_STATUS_FLAGS maintained externally */
/* PX4IO_P_STATUS_ALARMS maintained externally */
#ifdef ADC_VBATT
/* PX4IO_P_STATUS_VBATT */
{
/*
* Coefficients here derived by measurement of the 5-16V
* range on one unit, validated on sample points of another unit
*
* Data in Tools/tests-host/data folder.
*
* measured slope = 0.004585267878277 (int: 4585)
* nominal theoretic slope: 0.00459340659 (int: 4593)
* intercept = 0.016646394188076 (int: 16646)
* nominal theoretic intercept: 0.00 (int: 0)
*
*/
unsigned counts = adc_measure(ADC_VBATT);
if (counts != 0xffff) {
unsigned mV = (166460 + (counts * 45934)) / 10000;
unsigned corrected = (mV * r_page_setup[PX4IO_P_SETUP_VBATT_SCALE]) / 10000;
r_page_status[PX4IO_P_STATUS_VBATT] = corrected;
}
}
#endif
#ifdef ADC_IBATT
/* PX4IO_P_STATUS_IBATT */
{
/*
note that we have no idea what sort of
current sensor is attached, so we just
return the raw 12 bit ADC value and let the
FMU sort it out, with user selectable
configuration for their sensor
*/
unsigned counts = adc_measure(ADC_IBATT);
if (counts != 0xffff) {
r_page_status[PX4IO_P_STATUS_IBATT] = counts;
}
}
#endif
#ifdef ADC_VSERVO
/* PX4IO_P_STATUS_VSERVO */
{
unsigned counts = adc_measure(ADC_VSERVO);
if (counts != 0xffff) {
// use 3:1 scaling on 3.3V ADC input
unsigned mV = counts * 9900 / 4096;
r_page_status[PX4IO_P_STATUS_VSERVO] = mV;
}
}
#endif
#ifdef ADC_RSSI
/* PX4IO_P_STATUS_VRSSI */
{
unsigned counts = adc_measure(ADC_RSSI);
if (counts != 0xffff) {
// use 1:1 scaling on 3.3V ADC input
unsigned mV = counts * 3300 / 4096;
r_page_status[PX4IO_P_STATUS_VRSSI] = mV;
}
}
#endif
/* XXX PX4IO_P_STATUS_PRSSI */
SELECT_PAGE(r_page_status);
break;
case PX4IO_PAGE_RAW_ADC_INPUT:
memset(r_page_scratch, 0, sizeof(r_page_scratch));
#ifdef ADC_VBATT
r_page_scratch[0] = adc_measure(ADC_VBATT);
#endif
#ifdef ADC_IBATT
r_page_scratch[1] = adc_measure(ADC_IBATT);
#endif
#ifdef ADC_VSERVO
r_page_scratch[0] = adc_measure(ADC_VSERVO);
#endif
#ifdef ADC_RSSI
r_page_scratch[1] = adc_measure(ADC_RSSI);
#endif
SELECT_PAGE(r_page_scratch);
break;
case PX4IO_PAGE_PWM_INFO:
memset(r_page_scratch, 0, sizeof(r_page_scratch));
for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++)
r_page_scratch[PX4IO_RATE_MAP_BASE + i] = up_pwm_servo_get_rate_group(i);
SELECT_PAGE(r_page_scratch);
break;
/*
* Pages that are just a straight read of the register state.
*/
/* status pages */
case PX4IO_PAGE_CONFIG:
SELECT_PAGE(r_page_config);
break;
case PX4IO_PAGE_ACTUATORS:
SELECT_PAGE(r_page_actuators);
break;
case PX4IO_PAGE_SERVOS:
SELECT_PAGE(r_page_servos);
break;
case PX4IO_PAGE_RAW_RC_INPUT:
SELECT_PAGE(r_page_raw_rc_input);
break;
case PX4IO_PAGE_RC_INPUT:
SELECT_PAGE(r_page_rc_input);
break;
/* readback of input pages */
case PX4IO_PAGE_SETUP:
SELECT_PAGE(r_page_setup);
break;
case PX4IO_PAGE_CONTROLS:
SELECT_PAGE(r_page_controls);
break;
case PX4IO_PAGE_RC_CONFIG:
SELECT_PAGE(r_page_rc_input_config);
break;
case PX4IO_PAGE_DIRECT_PWM:
SELECT_PAGE(r_page_servos);
break;
case PX4IO_PAGE_FAILSAFE_PWM:
SELECT_PAGE(r_page_servo_failsafe);
break;
case PX4IO_PAGE_CONTROL_MIN_PWM:
SELECT_PAGE(r_page_servo_control_min);
break;
case PX4IO_PAGE_CONTROL_MAX_PWM:
SELECT_PAGE(r_page_servo_control_max);
break;
case PX4IO_PAGE_DISARMED_PWM:
SELECT_PAGE(r_page_servo_disarmed);
break;
default:
return -1;
}
#undef SELECT_PAGE
#undef COPY_PAGE
last_page = page;
last_offset = offset;
/* if the offset is at or beyond the end of the page, we have no data */
if (offset >= *num_values)
return -1;
/* correct the data pointer and count for the offset */
*values += offset;
*num_values -= offset;
return 0;
}
int
registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_values)
{
#define SELECT_PAGE(_page_name) \
do { \
*values = &_page_name[0]; \
*num_values = sizeof(_page_name) / sizeof(_page_name[0]); \
} while(0)
switch (page) {
/*
* Handle pages that are updated dynamically at read time.
*/
case PX4IO_PAGE_STATUS:
/* PX4IO_P_STATUS_FREEMEM */
{
struct mallinfo minfo = mallinfo();
r_page_status[PX4IO_P_STATUS_FREEMEM] = minfo.fordblks;
}
/* XXX PX4IO_P_STATUS_CPULOAD */
/* PX4IO_P_STATUS_FLAGS maintained externally */
/* PX4IO_P_STATUS_ALARMS maintained externally */
/* PX4IO_P_STATUS_VBATT */
{
/*
* Coefficients here derived by measurement of the 5-16V
* range on one unit:
*
* V counts
* 5 1001
* 6 1219
* 7 1436
* 8 1653
* 9 1870
* 10 2086
* 11 2303
* 12 2522
* 13 2738
* 14 2956
* 15 3172
* 16 3389
*
* slope = 0.0046067
* intercept = 0.3863
*
* Intercept corrected for best results @ 12V.
*/
unsigned counts = adc_measure(ADC_VBATT);
unsigned mV = (4150 + (counts * 46)) / 10 - 200;
unsigned corrected = (mV * r_page_setup[PX4IO_P_SETUP_VBATT_SCALE]) / 10000;
r_page_status[PX4IO_P_STATUS_VBATT] = corrected;
}
/* PX4IO_P_STATUS_IBATT */
{
unsigned counts = adc_measure(ADC_VBATT);
unsigned scaled = (counts * r_page_setup[PX4IO_P_SETUP_IBATT_SCALE]) / 10000;
int corrected = scaled + REG_TO_SIGNED(r_page_setup[PX4IO_P_SETUP_IBATT_BIAS]);
if (corrected < 0)
corrected = 0;
r_page_status[PX4IO_P_STATUS_IBATT] = corrected;
}
SELECT_PAGE(r_page_status);
break;
case PX4IO_PAGE_RAW_ADC_INPUT:
memset(r_page_scratch, 0, sizeof(r_page_scratch));
r_page_scratch[0] = adc_measure(ADC_VBATT);
r_page_scratch[1] = adc_measure(ADC_IN5);
SELECT_PAGE(r_page_scratch);
break;
case PX4IO_PAGE_PWM_INFO:
memset(r_page_scratch, 0, sizeof(r_page_scratch));
for (unsigned i = 0; i < IO_SERVO_COUNT; i++)
r_page_scratch[PX4IO_RATE_MAP_BASE + i] = up_pwm_servo_get_rate_group(i);
SELECT_PAGE(r_page_scratch);
break;
/*
* Pages that are just a straight read of the register state.
*/
/* status pages */
case PX4IO_PAGE_CONFIG:
SELECT_PAGE(r_page_config);
break;
case PX4IO_PAGE_ACTUATORS:
SELECT_PAGE(r_page_actuators);
break;
case PX4IO_PAGE_SERVOS:
SELECT_PAGE(r_page_servos);
break;
case PX4IO_PAGE_RAW_RC_INPUT:
SELECT_PAGE(r_page_raw_rc_input);
break;
case PX4IO_PAGE_RC_INPUT:
SELECT_PAGE(r_page_rc_input);
break;
/* readback of input pages */
case PX4IO_PAGE_SETUP:
SELECT_PAGE(r_page_setup);
break;
case PX4IO_PAGE_CONTROLS:
SELECT_PAGE(r_page_controls);
break;
case PX4IO_PAGE_RC_CONFIG:
SELECT_PAGE(r_page_rc_input_config);
break;
case PX4IO_PAGE_DIRECT_PWM:
SELECT_PAGE(r_page_servos);
break;
case PX4IO_PAGE_FAILSAFE_PWM:
SELECT_PAGE(r_page_servo_failsafe);
break;
default:
return -1;
}
#undef SELECT_PAGE
#undef COPY_PAGE
last_page = page;
last_offset = offset;
/* if the offset is at or beyond the end of the page, we have no data */
if (offset >= *num_values)
return -1;
/* correct the data pointer and count for the offset */
*values += offset;
*num_values -= offset;
return 0;
}
int
PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg)
{
int ret = OK;
lock();
switch (cmd) {
case PWM_SERVO_ARM:
up_pwm_servo_arm(true);
break;
case PWM_SERVO_SET_ARM_OK:
case PWM_SERVO_CLEAR_ARM_OK:
case PWM_SERVO_SET_FORCE_SAFETY_OFF:
case PWM_SERVO_SET_FORCE_SAFETY_ON:
// these are no-ops, as no safety switch
break;
case PWM_SERVO_DISARM:
up_pwm_servo_arm(false);
break;
case PWM_SERVO_GET_DEFAULT_UPDATE_RATE:
*(uint32_t *)arg = _pwm_default_rate;
break;
case PWM_SERVO_SET_UPDATE_RATE:
ret = set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, arg);
break;
case PWM_SERVO_GET_UPDATE_RATE:
*(uint32_t *)arg = _pwm_alt_rate;
break;
case PWM_SERVO_SET_SELECT_UPDATE_RATE:
ret = set_pwm_rate(arg, _pwm_default_rate, _pwm_alt_rate);
break;
case PWM_SERVO_GET_SELECT_UPDATE_RATE:
*(uint32_t *)arg = _pwm_alt_rate_channels;
break;
case PWM_SERVO_SET_FAILSAFE_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_failsafe_pwm[i] = PWM_HIGHEST_MAX;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_failsafe_pwm[i] = PWM_LOWEST_MIN;
} else {
_failsafe_pwm[i] = pwm->values[i];
}
}
/*
* update the counter
* this is needed to decide if disarmed PWM output should be turned on or not
*/
_num_failsafe_set = 0;
for (unsigned i = 0; i < _max_actuators; i++) {
if (_failsafe_pwm[i] > 0)
_num_failsafe_set++;
}
break;
}
case PWM_SERVO_GET_FAILSAFE_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _failsafe_pwm[i];
}
pwm->channel_count = _max_actuators;
break;
}
case PWM_SERVO_SET_DISARMED_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_disarmed_pwm[i] = PWM_HIGHEST_MAX;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_disarmed_pwm[i] = PWM_LOWEST_MIN;
} else {
_disarmed_pwm[i] = pwm->values[i];
}
}
/*
* update the counter
* this is needed to decide if disarmed PWM output should be turned on or not
*/
_num_disarmed_set = 0;
for (unsigned i = 0; i < _max_actuators; i++) {
if (_disarmed_pwm[i] > 0)
_num_disarmed_set++;
}
break;
}
case PWM_SERVO_GET_DISARMED_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _disarmed_pwm[i];
}
pwm->channel_count = _max_actuators;
break;
}
case PWM_SERVO_SET_MIN_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MIN) {
_min_pwm[i] = PWM_HIGHEST_MIN;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_min_pwm[i] = PWM_LOWEST_MIN;
} else {
_min_pwm[i] = pwm->values[i];
}
}
break;
}
case PWM_SERVO_GET_MIN_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _min_pwm[i];
}
pwm->channel_count = _max_actuators;
arg = (unsigned long)&pwm;
break;
}
case PWM_SERVO_SET_MAX_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] < PWM_LOWEST_MAX) {
_max_pwm[i] = PWM_LOWEST_MAX;
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_max_pwm[i] = PWM_HIGHEST_MAX;
} else {
_max_pwm[i] = pwm->values[i];
}
}
break;
}
case PWM_SERVO_GET_MAX_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _max_pwm[i];
}
pwm->channel_count = _max_actuators;
arg = (unsigned long)&pwm;
break;
}
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_SET(7):
case PWM_SERVO_SET(6):
if (_mode < MODE_8PWM) {
ret = -EINVAL;
break;
}
#endif
case PWM_SERVO_SET(5):
case PWM_SERVO_SET(4):
if (_mode < MODE_6PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_SET(3):
case PWM_SERVO_SET(2):
if (_mode < MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_SET(1):
case PWM_SERVO_SET(0):
if (arg <= 2100) {
up_pwm_servo_set(cmd - PWM_SERVO_SET(0), arg);
} else {
ret = -EINVAL;
}
break;
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_GET(7):
case PWM_SERVO_GET(6):
if (_mode < MODE_8PWM) {
ret = -EINVAL;
break;
}
#endif
case PWM_SERVO_GET(5):
case PWM_SERVO_GET(4):
if (_mode < MODE_6PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_GET(3):
case PWM_SERVO_GET(2):
if (_mode < MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_GET(1):
case PWM_SERVO_GET(0):
*(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0));
break;
case PWM_SERVO_GET_RATEGROUP(0):
case PWM_SERVO_GET_RATEGROUP(1):
case PWM_SERVO_GET_RATEGROUP(2):
case PWM_SERVO_GET_RATEGROUP(3):
case PWM_SERVO_GET_RATEGROUP(4):
case PWM_SERVO_GET_RATEGROUP(5):
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_GET_RATEGROUP(6):
case PWM_SERVO_GET_RATEGROUP(7):
#endif
*(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0));
break;
case PWM_SERVO_GET_COUNT:
case MIXERIOCGETOUTPUTCOUNT:
switch (_mode) {
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case MODE_8PWM:
*(unsigned *)arg = 8;
break;
#endif
case MODE_6PWM:
*(unsigned *)arg = 6;
break;
case MODE_4PWM:
*(unsigned *)arg = 4;
break;
case MODE_2PWM:
*(unsigned *)arg = 2;
break;
default:
ret = -EINVAL;
break;
}
break;
case PWM_SERVO_SET_COUNT: {
/* change the number of outputs that are enabled for
* PWM. This is used to change the split between GPIO
* and PWM under control of the flight config
* parameters. Note that this does not allow for
* changing a set of pins to be used for serial on
* FMUv1
*/
switch (arg) {
case 0:
set_mode(MODE_NONE);
break;
case 2:
set_mode(MODE_2PWM);
break;
case 4:
set_mode(MODE_4PWM);
break;
#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2)
case 6:
set_mode(MODE_6PWM);
break;
#endif
#if defined(CONFIG_ARCH_BOARD_AEROCORE)
case 8:
set_mode(MODE_8PWM);
break;
#endif
default:
ret = -EINVAL;
break;
}
break;
}
case MIXERIOCRESET:
if (_mixers != nullptr) {
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
}
break;
case MIXERIOCADDSIMPLE: {
mixer_simple_s *mixinfo = (mixer_simple_s *)arg;
SimpleMixer *mixer = new SimpleMixer(control_callback,
(uintptr_t)_controls, mixinfo);
if (mixer->check()) {
delete mixer;
_groups_required = 0;
ret = -EINVAL;
} else {
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback,
(uintptr_t)_controls);
_mixers->add_mixer(mixer);
_mixers->groups_required(_groups_required);
}
break;
}
case MIXERIOCLOADBUF: {
const char *buf = (const char *)arg;
unsigned buflen = strnlen(buf, 1024);
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback, (uintptr_t)_controls);
if (_mixers == nullptr) {
_groups_required = 0;
ret = -ENOMEM;
} else {
ret = _mixers->load_from_buf(buf, buflen);
if (ret != 0) {
debug("mixer load failed with %d", ret);
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
ret = -EINVAL;
} else {
_mixers->groups_required(_groups_required);
}
}
break;
}
default:
ret = -ENOTTY;
break;
}
unlock();
return ret;
}
