bool LanImpl::stop()
{
#ifndef NO_WIRELESS_LAN
if ( type() & QtopiaNetwork::WirelessLAN )
roaming->activeNotification( false );
#endif
switch (ifaceStatus ) {
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
case QtopiaNetworkInterface::Up:
break;
case QtopiaNetworkInterface::Unknown:
case QtopiaNetworkInterface::Unavailable:
case QtopiaNetworkInterface::Down:
default:
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Interface is not running.") );
return true;
}
#ifndef NO_WIRELESS_LAN
if ( type() & QtopiaNetwork::WirelessLAN ) {
wlanRegProvider->setAccessPoint();
wlanRegProvider->notifyClients();
}
#endif
// ### stop eth0
QStringList args;
args << "stop";
args << deviceName;
thread.addScriptToRun( lanScript, args );
updateTrigger();
return true;
}
bool DialupImpl::stop()
{
switch( ifaceStatus ) {
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
case QtopiaNetworkInterface::Up:
break;
//case QtopiaNetworkInterface::Unknown:
//case QtopiaNetworkInterface::Unavailable:
//case QtopiaNetworkInterface::Down:
default:
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Device is not active.") );
return true;
}
const QtopiaNetwork::Type t = type();
if ( t & QtopiaNetwork::NamedModem || t & QtopiaNetwork::PCMCIA ) {
QStringList args;
args << "stop";
args << pppIface;
thread.addScriptToRun( pppScript, args );
} else {
#ifdef QTOPIA_CELL
qLog(Network) << "stopping data call on phone line";
if ( ! dataCall.isNull() ) {
dataCall.hangup();
}
#endif
}
if ( tidStateUpdate ) {
killTimer( tidStateUpdate );
tidStateUpdate = 0;
state = Initialize;
logIndex = 0;
}
pppIface = QString();
netSpace->setAttribute( "NetDevice", QString() );
ifaceStatus = QtopiaNetworkInterface::Down;
#ifdef QTOPIA_CELL
if ( t & QtopiaNetwork::PhoneModem ) //internal phone device
pppdProcessBlocked = true;
#endif
status();
updateTrigger();
return true;
}
bool DialupImpl::setDefaultGateway()
{
if ( pppIface.isEmpty() ) {
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Cannot set default gateway.") );
qLog(Network) << "Cannot set default gateway";
return false;
}
QStringList params;
params << "install";
params << "dns";
if ( configIface->property("Serial/UsePeerDNS").toString() == "n" ) {
params << configIface->property("Properties/DNS_1").toString();
params << configIface->property("Properties/DNS_2").toString();
}
thread.addScriptToRun( pppScript, params );
qLog(Network) << "Settings default gateway to" <<configIface->configFile();
QStringList args;
args << "route";
args << pppIface;
thread.addScriptToRun( pppScript, args );
return true;
}
void BluetoothImpl::cleanup()
{
if ( ifaceStatus != QtopiaNetworkInterface::Unknown ) {
ifaceStatus = QtopiaNetworkInterface::Unknown;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
return;
}
const QString peerName = configIface->property("Serial/PeerID").toString();
if ( peerName.isEmpty() )
return;
//delete peer file
qLog(Network) << "Deleting DUN peer file";
QFile::remove( "/etc/ppp/peers/"+peerName );
//delete chat files
qLog(Network) << "Deleting connect chat script";
const QString path = Qtopia::applicationFileName("Network","chat");
QString chat = path + "/connect-" + peerName;
qLog(Network) << QString("Deleting connect file (%1)").arg(chat);
QFile::remove(chat);
}
void TriggerObject::Update(double dt, bool* myKey)
{
updateTrigger(dt, myKey); //Actual update
//Sprite animation
switch (type)
{
case FIRE:
{
setState(FIRE);
if (animationList[FIRE]->ended == true)
{
animationList[FIRE]->Reset();
if(this->getActive() == true)
{
my_sfx_man->play_fire();
}
}
if (mesh != animationList[FIRE])
{
setMesh(animationList[FIRE]);
}
animationList[FIRE]->Update(dt);
break;
}
}
}
/*
lan-network route <iface> [-gw <gateway-IP>]
*/
bool LanImpl::setDefaultGateway()
{
if ( deviceName.isEmpty() ) {
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Cannot set default gateway.") );
qLog(Network) << "Cannot set default gateway";
return false;
}
qLog(Network) << "Settings default gateway to" <<configIface->configFile();
QStringList args;
args << "route";
args << deviceName;
const bool dhcp = configIface->property("Properties/DHCP").toString() != "n";
if ( !dhcp ) {
QString gateway = configIface->property("Properties/GATEWAY").toString();
args << "-gw";
args << gateway;
}
thread.addScriptToRun( lanScript, args );
//new gateway may require new dns
installDNS( dhcp );
return true;
}
QtopiaNetworkInterface::Status LanImpl::status()
{
//don't change status - initialize has not been called yet
if ( ifaceStatus == QtopiaNetworkInterface::Unknown) {
return ifaceStatus;
}
QtopiaNetworkInterface::Status status = QtopiaNetworkInterface::Unavailable;
if ( isAvailable() ) {
status = QtopiaNetworkInterface::Down;
if ( thread.remainingTasks() > 0 ) {
//still some jobs to do -> don't do anything until they are done
status = ifaceStatus;
} else {
switch( ifaceStatus ) {
case QtopiaNetworkInterface::Demand:
status = ifaceStatus;
break;
case QtopiaNetworkInterface::Pending:
default:
if ( isActive() )
status = QtopiaNetworkInterface::Up;
break;
}
}
}
ifaceStatus = status;
netSpace->setAttribute( "State", (int)ifaceStatus );
updateTrigger();
return ifaceStatus;
}
void BluetoothImpl::initialize()
{
if ( !netSpace ) { //initialize the value space for this interface
QByteArray path("/Network/Interfaces/"+ QByteArray::number(qHash(configIface->configFile())) );
netSpace = new QValueSpaceObject( path, this );
netSpace->setAttribute( QLatin1String("Config"), configIface->configFile() );
netSpace->setAttribute( QLatin1String("State"), QtopiaNetworkInterface::Unknown );
netSpace->setAttribute( QLatin1String("Error"), QtopiaNetworkInterface::NotInitialized );
netSpace->setAttribute( QLatin1String("ErrorString"), tr("Interface hasn't been initialized yet.") );
netSpace->setAttribute( QLatin1String("NetDevice"), QVariant() );
netSpace->setAttribute( QLatin1String("BtDevice"), QVariant() );
netSpace->setAttribute( QLatin1String("UpdateTrigger"), 0 );
}
if ( !dialupDev ) {
dialupDev = new BluetoothDialupDevice( this );
connect( dialupDev, SIGNAL(deviceStateChanged()),
this, SLOT(updateState()) );
connect( dialupDev, SIGNAL(connectionEstablished()),
this, SLOT(serialPortConnected()) );
}
if ( isAvailable() ) {
ifaceStatus = Down;
} else {
ifaceStatus = Unavailable;
}
netSpace->setAttribute( QLatin1String("State"), ifaceStatus );
updateTrigger();
}
bool BluetoothImpl::stop()
{
switch( ifaceStatus ) {
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
case QtopiaNetworkInterface::Up:
break;
default:
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Interface is not active.") );
return false;
}
//stop pppd
QStringList args;
args << "stop";
args << pppIface;
thread.addScriptToRun( pppScript, args );
dialupDev->releaseDUNConnection();
if (session) {
session->endSession();
delete session;
session = 0;
}
if ( tidStateUpdate ) {
killTimer( tidStateUpdate );
tidStateUpdate = 0;
state = Initialize;
logIndex = 0;
}
ifaceStatus = QtopiaNetworkInterface::Down;
netSpace->setAttribute( "State", ifaceStatus );
pppIface = "";
netSpace->setAttribute( "NetDevice", QByteArray() );
updateTrigger();
return true;
}
/*!
This function is part of the startup procedure and is called once the
rfcomm device has been created.
*/
void BluetoothImpl::serialPortConnected( )
{
const QByteArray tty = dialupDev->rfcommDevice();
if ( tty.isEmpty() || !QFile::exists( tty ) ) {
if ( !tty.isEmpty() ) {
qLog(Network) << "Invalid rfcomm device:" << tty;
dialupDev->releaseDUNConnection();
} else {
qLog(Network) << "Empty rfcomm device";
}
if (session) {
session->endSession();
delete session;
session = 0;
}
ifaceStatus = QtopiaNetworkInterface::Down;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger(QtopiaNetworkInterface::UnknownError,
tr("Cannot bind Bluetooth DUN to serial port.") );
status();
return;
}
const QString peerName = configIface->property("Serial/PeerID").toString();
QStringList params;
if ( tty.startsWith("/dev/") )
params << tty.mid( 5 /*strlen("/dev/")*/ );
else
params << tty;
params << QLatin1String("updetach");
params << QLatin1String("debug"); //enable debugging output
const QString logfile = Qtopia::tempDir() + "qpe-pppd-log-"+ peerName;
params << "logfile";
params << logfile;
QFile::remove( logfile ) ;
params << "call";
params << peerName;
qLog(Network) << "###################################";
qLog(Network) << "Starting ppp using " << tty;
qLog(Network) << "using parameter:" << params.join(QString(" ") );
params.prepend( QLatin1String("start") );
thread.addScriptToRun( pppScript, params );
state = Initialize;
logIndex = 0;
tidStateUpdate = startTimer( 1000 );
}
void getInventoryItemFromScript(char *line)
{
char command[15], itemName[MAX_VALUE_LENGTH], entityName[MAX_VALUE_LENGTH], quiet[MAX_VALUE_LENGTH];
int quantity, success, failure, quantityToRemove, read;
Entity *e, *item;
read = sscanf(line, "%s \"%[^\"]\" %d %d %s %d %d %s", command, itemName, &quantity, &quantityToRemove, entityName, &success, &failure, quiet);
if (read < 7)
{
showErrorAndExit("HAS_ITEM or REMOVE command has wrong number of arguments");
}
e = getEntityByObjectiveName(entityName);
if (e == NULL)
{
showErrorAndExit("Could not find Entity %s to give item %s to", entityName, itemName);
}
item = getInventoryItemByObjectiveName(itemName);
if (item != NULL && (item->health >= quantity || quantity == 1))
{
if (strcmpignorecase(command, "REMOVE") == 0)
{
item->health -= quantityToRemove;
updateTrigger(itemName, quantityToRemove);
updateGlobalTrigger(itemName, quantityToRemove);
if (item->health <= 0 || quantityToRemove == -1)
{
item->health = 0;
removeInventoryItemByObjectiveName(itemName);
if (read == 7)
{
setInfoBoxMessage(90, 255, 255, 255, _("Removed %s"), _(itemName));
}
}
}
e->health = success;
}
else
{
e->health = failure;
}
}
OctreeTriggerPlayer::~OctreeTriggerPlayer(void)
{
// 结束前也要更新
updateTrigger();
if(m_node)
{
m_node->detachObject(this);
m_sceneMgr->getRootSceneNode()->removeAndDestroyChild(m_node->getName());
m_node = 0;
}
if(m_query)
{
m_sceneMgr->destroyQuery(m_query);
m_query = 0;
}
}
bool BluetoothImpl::start( const QVariant /*options*/ )
{
if ( ifaceStatus != QtopiaNetworkInterface::Down ) {
switch ( ifaceStatus )
{
case QtopiaNetworkInterface::Unknown:
updateTrigger( QtopiaNetworkInterface::NotInitialized,
tr("Interface hasn't been initialized yet.") );
break;
case QtopiaNetworkInterface::Unavailable:
updateTrigger( QtopiaNetworkInterface::NotAvailable,
tr("Interface is not available.") );
break;
case QtopiaNetworkInterface::Up:
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Interface already started/active.") );
break;
default:
break;
}
qLog(Network) << "ppp interface cannot be started "
<<configIface->configFile();
return false;
}
bool result = false;
QBluetoothAddress addr( configIface->property(QLatin1String("Serial/PartnerDevice")).toString() );
if ( addr.isValid() ) {
session = QCommDeviceSession::session(QBluetoothLocalDevice().deviceName().toLatin1());
if (!session) {
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Bluetooth Session failed.") );
return false;
}
qLog(Network) << "Connecting to" << addr.toString();
dialupDev->connectToDUNService( addr );
result = true;
ifaceStatus = QtopiaNetworkInterface::Pending;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("No remote Bluetooth partner selected.") );
}
return result;
}
QtopiaNetworkInterface::Status BluetoothImpl::status()
{
if ( ifaceStatus == Unknown ) //not initialized
return ifaceStatus;
QtopiaNetworkInterface::Status status = Unavailable;
if ( isAvailable() ) {
status = Down;
if ( ifaceStatus == Demand || ifaceStatus == Pending )
status = ifaceStatus;
else if ( isActive() )
status = QtopiaNetworkInterface::Up;
}
ifaceStatus = status;
netSpace->setAttribute( QLatin1String("State"), ifaceStatus );
updateTrigger();
return ifaceStatus;
}
void LanImpl::cleanup()
{
if ( ifaceStatus != QtopiaNetworkInterface::Unknown ) {
ifaceStatus = QtopiaNetworkInterface::Unknown;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
return;
}
QStringList params;
params << "cleanup"; //no tr
thread.addScriptToRun( lanScript, params );
//remove network device assigned to this config
QString key = devToConfig->key( configIface->configFile() );
if ( !key.isEmpty() )
devToConfig->remove( key );
}
bool BluetoothImpl::setDefaultGateway()
{
if ( pppIface.isEmpty() ) {
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Cannot set default gateway.") );
qLog(Network) << "Cannot set default gateway";
return false;
}
QStringList args;
args << "route";
args << pppIface;
thread.addScriptToRun( pppScript, args );
QStringList dns;
dns << "install";
dns << "dns";
thread.addScriptToRun( pppScript, dns );
return true;
}
void DialupImpl::cleanup()
{
if ( ifaceStatus != QtopiaNetworkInterface::Unknown ) {
ifaceStatus = QtopiaNetworkInterface::Unknown;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
return;
}
//delete peer file
qLog(Network) << "Deleting peer file";
QStringList params;
params << "cleanup";
params << "peer";
const QString peerName = configIface->property("Serial/PeerID").toString();
if ( peerName.isEmpty() )
return;
params << peerName;
thread.addScriptToRun( pppScript, params );
//reversing to standard dns server
qLog(Network) << "deinstalling DNS server";
params.clear();
params << "cleanup";
params << "dns";
thread.addScriptToRun( pppScript, params );
//delete chat files
const QString path = Qtopia::applicationFileName("Network","chat");
QString chat = path + "/connect-" + peerName;
qLog(Network) << QString("Deleting connect file (%1)").arg(chat);
QFile::remove(chat);
chat = path + "/disconnect-" + peerName;
qLog(Network) << QString("Deleting disconnect file (%1)").arg(chat);
QFile::remove(chat);
//config file will be deleted by qtopia network server
}
QtopiaNetworkInterface::Status DialupImpl::status()
{
if ( ifaceStatus == QtopiaNetworkInterface::Unknown) {
return ifaceStatus;
}
QtopiaNetworkInterface::Status status = QtopiaNetworkInterface::Unavailable;
if ( isAvailable() ) {
status = QtopiaNetworkInterface::Down;
if ( ifaceStatus == QtopiaNetworkInterface::Pending ||
ifaceStatus == QtopiaNetworkInterface::Demand )
// these states are updated by timerEvent
status = ifaceStatus;
else if ( isActive() )
status = QtopiaNetworkInterface::Up;
}
ifaceStatus = status;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
return ifaceStatus;
}
void LanImpl::initialize()
{
if ( !netSpace ) {
QString path = QString("/Network/Interfaces/%1").arg( qHash( configIface->configFile() ) );
netSpace = new QValueSpaceObject( path, this );
netSpace->setAttribute( "Config", configIface->configFile() );
netSpace->setAttribute( "State", ifaceStatus );
netSpace->setAttribute( "ErrorString", tr("Interface hasn't been initialized yet.") );
netSpace->setAttribute( "Error", QtopiaNetworkInterface::NotInitialized );
netSpace->setAttribute( "NetDevice", QVariant() );
netSpace->setAttribute( "UpdateTrigger" , 0 );
}
if ( isAvailable() ) {
qLog(Network) << "LanImpl: Using network interface: " <<deviceName;
if ( isActive() )
ifaceStatus = QtopiaNetworkInterface::Up;
else
ifaceStatus = QtopiaNetworkInterface::Down;
} else {
ifaceStatus = QtopiaNetworkInterface::Unavailable;
qLog(Network) << "LanImpl: interface not available";
}
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
#ifndef NO_WIRELESS_LAN
QtopiaNetwork::Type t = type();
if ( t & QtopiaNetwork::WirelessLAN ) {
roaming = new RoamingMonitor( configIface, this );
connect( roaming, SIGNAL(changeNetwork()), this, SLOT(reconnectWLAN()) );
wlanRegProvider = new WlanRegistrationProvider( QString::number(qHash(configIface->configFile())), this );
wlanRegProvider->initialize();
}
#endif
}
void DialupImpl::initialize()
{
if ( !netSpace ) {
const uint ident = qHash( configIface->configFile() );
QString path = QString("/Network/Interfaces/%1").arg(ident);
netSpace = new QValueSpaceObject( path, this );
netSpace->setAttribute( "Config", configIface->configFile() );
netSpace->setAttribute( "State", QtopiaNetworkInterface::Unknown );
netSpace->setAttribute( "Error", QtopiaNetworkInterface::NotInitialized );
netSpace->setAttribute( "ErrorString", tr("Interface hasn't been initialized yet.") );
netSpace->setAttribute( "NetDevice", QVariant() );
netSpace->setAttribute( "UpdateTrigger", 0 );
}
if ( isAvailable() ) {
ifaceStatus = QtopiaNetworkInterface::Down;
qLog(Network) << "DialupImpl: Using serial device: " << device();
} else {
ifaceStatus = QtopiaNetworkInterface::Unavailable;
qLog(Network) << "DialupImpl: interface not available";
}
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
#ifdef QTOPIA_CELL
QtopiaNetwork::Type t = type();
if ( t & QtopiaNetwork::PhoneModem ) {
//we cannot start an internal GPRS connection if we don't have a registered network
//initiate monitoring of registration changes
commManager = new QCommServiceManager( this );
connect( commManager, SIGNAL(servicesChanged()), this, SLOT(registrationStateChanged()) );
registrationStateChanged(); //ask for first update
}
#endif
}
void PortamentoFilter::process() {
updateTrigger();
updateReleased();
}
bool DialupImpl::start( const QVariant /*options*/ )
{
if ( ifaceStatus != QtopiaNetworkInterface::Down ) {
switch ( ifaceStatus )
{
case QtopiaNetworkInterface::Unknown:
updateTrigger( QtopiaNetworkInterface::NotInitialized,
tr("Interface hasn't been initialized yet.") );
break;
case QtopiaNetworkInterface::Unavailable:
updateTrigger( QtopiaNetworkInterface::NotAvailable,
tr("Interface is not available.") );
break;
case QtopiaNetworkInterface::Up:
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Interface already started/active.") );
break;
default:
break;
}
qLog(Network) << "ppp interface cannot be started "
<<configIface->configFile();
return false;
}
QtopiaNetworkProperties prop = configIface->getProperties();
QStringList args;
const bool demand = prop.value("Properties/Autostart").toString() == "y";
const QtopiaNetwork::Type t = type();
#ifdef QTOPIA_CELL
if ( t & QtopiaNetwork::PhoneModem ) {
if ( regState != QTelephony::RegistrationHome &&
regState != QTelephony::RegistrationRoaming ) {
//we want to start the network but we don't have a network
//registration yet. wait till registration is done then go ahead
//and start iface
qLog(Network) << "Cannot start dialup yet due to missing"
<< "network registration. try again later";
registrationStateChanged(); //ask for first update
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Missing network registration. Try again later.") );
return false;
}
}
#endif
if ( t & QtopiaNetwork::NamedModem || t & QtopiaNetwork::PCMCIA ) {
QString dev = device();
if ( dev.isEmpty() || dev == "internal") {
qLog(Network) << "No external device";
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Missing external serial device.") );
return false;
}
if ( dev.startsWith("/dev/") )
dev = dev.mid(5);
args << dev;
args << "updetach";
}
#ifdef QTOPIA_CELL
else {
args << "nodetach";
}
#endif
args << "debug";
args << "call";
const QString peerID = prop.value("Serial/PeerID").toString();
if ( peerID.isEmpty() ) {
qLog(Network) << "Missing peer ID";
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Missing peer ID. Please reconfigure device.") );
return false;
}
args << peerID;
QString password = prop.value("Properties/Password").toString();
if (!password.isEmpty()) {
args << "password";
args << password;
}
const QString logfile = Qtopia::tempDir() + "qpe-pppd-log-"+peerID;
args << "logfile";
args << logfile;
QFile::remove( logfile ) ;
if ( t & QtopiaNetwork::NamedModem || t & QtopiaNetwork::PCMCIA ) {
qLog(Network) << "###################################";
qLog(Network) << "Starting ppp using external modem: " <<
args.join(" ");
args.prepend("start"); //cmd for network script
thread.addScriptToRun( pppScript, args );
} else { //QtopiaNetwork::PhoneModem
#ifdef QTOPIA_CELL
const QString path = Qtopia::applicationFileName("Network", "chat");
const QString connectF = path+"/connect-"+peerID;
const QString disconnectF = path+"/disconnect-"+peerID;
//Create a data call
qLog(Network) << "###################################";
qLog(Network) << "Starting ppp using internal modem: " <<
args.join(" ");
qLog(Network) << "connect: " << connectF;
qLog(Network) << "disconnect: " << disconnectF;
qLog(Network) << "demand dialing: " << (demand ? "yes" : "no");
QDialOptions pppd;
pppd.setUseIpModule( true );
pppd.setIpProgramName( PPPD_BINARY );
pppd.setIpConnectScript( connectF );
pppd.setIpDisconnectScript( disconnectF );
pppd.setIpDemandDialing( demand );
pppd.setIpArgs( args );
//Make sure that an existing call is stopped.
if ( !dataCall.isNull() ) {
dataCall.hangup();
}
if ( !callManager )
callManager = new QPhoneCallManager( this );
//Dial the new call.
if ( callManager ) {
dataCall = callManager->create( "IP" );
dataCall.connectNotification( this,
SLOT(connectNotification(QPhoneCall,QPhoneCall::Notification,QString)));
dataCall.connectStateChanged( this, SLOT(phoneCallStateChanged(QPhoneCall)) );
dataCall.dial( pppd );
} else {
qLog(Network) << "No call manager created";
}
#endif
}
state = Initialize;
logIndex = 0;
tidStateUpdate = startTimer( 1000 );
if ( demand )
ifaceStatus = QtopiaNetworkInterface::Demand;
else
ifaceStatus = QtopiaNetworkInterface::Pending;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
delayedGatewayInstall = true;
return true;
}
void DialupImpl::timerEvent( QTimerEvent* /*e*/)
{
const QString peerID = configIface->property("Serial/PeerID").toString();
const QString logfile = Qtopia::tempDir() + "qpe-pppd-log-"+peerID;
const bool demand = configIface->property("Properties/Autostart").toString() == "y";
if (state == Disappearing) {
if ( tidStateUpdate )
killTimer( tidStateUpdate );
tidStateUpdate = 0;
state = Initialize;
logIndex = 0;
updateState();
qLog(Network) << "Stopping ppp script monitor";
return;
}
QFile logf( logfile );
if ( logf.open(QIODevice::ReadOnly) ) {
QString log = logf.readAll();
log.replace(QRegExp("\r"),"");
if ( logIndex > log.length() )
logIndex = 0;
switch ( state ) {
case Initialize:
{
int i = 0;
if ( log.indexOf(QRegExp("\nFailed"), logIndex)>=logIndex
|| log.indexOf(QRegExp("is locked by pid"), logIndex) >= logIndex
|| log.indexOf(QRegExp("Connect script failed"), logIndex) >= logIndex )
{
state = Disappearing;
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect chat failed.") );
qLog(Network) << "Connect chat failed";
return;
}
if ( log.indexOf(QRegExp("\nNO DIALTONE"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nNO CARRIER"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nERROR"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nBUSY"), logIndex)>=logIndex )
{
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect chat not responding.") );
state = Disappearing;
qLog(Network) << "Connect chat not responding";
} else if ( (i=log.indexOf(QRegExp("Using interface ppp.*\n"), logIndex))>= logIndex ) {
//determine iface name;
int end = log.indexOf(QRegExp("\n"), i);
int begin = log.indexOf(QRegExp("ppp"), i);
pppIface = log.mid(begin, end-begin);
netSpace->setAttribute( "NetDevice", pppIface );
qLog(Network) << "using interface: " << pppIface;
logIndex = end;
if ( !demand )
state = Connect;
} else if ( demand ) {
if ( (i=log.indexOf(QRegExp("Starting link\n"), logIndex))>=logIndex ) {
ifaceStatus = QtopiaNetworkInterface::Pending;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
logIndex = i++;
state = Connect;
}
}
}
break;
case Connect:
{
int i = 0;
if ( (i=log.indexOf(QRegExp("\nPAP authentication failed"), logIndex))>=logIndex
|| (i=log.indexOf(QRegExp("\nCHAP authentication failed"), logIndex))>=logIndex
|| (i=log.indexOf(QRegExp("\nConnection terminated."), logIndex)) >=logIndex)
{
state = Disappearing;
pppIface = QString();
netSpace->setAttribute( "NetDevice", QString() );
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Authentication failed.") );
qLog(Network) << "Authentication failed";
} else if ( (i=log.indexOf(QRegExp("\nLocal IP address changed"), logIndex)) >= logIndex
|| (i=log.indexOf(QRegExp("\nlocal IP address"), logIndex)) >= logIndex )
{
logIndex = i;
ifaceStatus = QtopiaNetworkInterface::Up;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
state = Monitoring;
QtopiaNetwork::setDefaultGateway( configIface->configFile() );
} else if ( (i=log.indexOf(QRegExp("\nConnect script failed"), logIndex)) >= logIndex )
{
logIndex = i;
if ( demand ) {
state = Initialize;
ifaceStatus = QtopiaNetworkInterface::Demand;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
state = Disappearing;
pppIface = QString();
netSpace->setAttribute( "NetDevice", QString() );
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect failed.") );
qLog(Network) << "Connect failed";
}
}
}
break;
case Monitoring:
{
int i;
if ( (i=log.indexOf(QRegExp("\nConnection terminated"), logIndex)) >= logIndex ) {
logIndex = i++;
qLog(Network) << "Connection terminated";
if ( demand ) {
state = Initialize;
ifaceStatus = QtopiaNetworkInterface::Demand;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
} else {
pppIface = QString();
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "NetDevice", QString() );
netSpace->setAttribute( "State", ifaceStatus );
state = Disappearing;
updateTrigger();
QtopiaNetwork::unsetDefaultGateway( configIface->configFile() );
}
}
}
break;
default:
break;
}
}
}
bool LanImpl::start( const QVariant options )
{
const QtopiaNetworkProperties prop = configIface->getProperties();
const bool dhcp = prop.value("Properties/DHCP").toString() != "n";
bool writeToSystem = prop.value("Info/WriteToSystem").toBool();
#ifndef NO_WIRELESS_LAN
int netIndex = 0;
QtopiaNetwork::Type t = type();
if ( t & QtopiaNetwork::WirelessLAN ) {
QString essid = options.toString();
netIndex = roaming->selectWLAN( essid );
if (netIndex <= 0) {
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("No WLAN found in sourrounding area") );
qLog(Network) << "Invalid WLAN selected";
return false;
}
writeToSystem = true; //we always have to update the config since we change it very often
roaming->activeNotification( true );
}
#else
Q_UNUSED( options );
#endif
if ( ifaceStatus != QtopiaNetworkInterface::Down || deviceName.isEmpty() ) {
switch ( ifaceStatus )
{
case QtopiaNetworkInterface::Unknown:
updateTrigger( QtopiaNetworkInterface::NotInitialized,
tr("Interface hasn't been initialized yet.") );
break;
case QtopiaNetworkInterface::Unavailable:
updateTrigger( QtopiaNetworkInterface::NotAvailable,
tr("Interface is not available.") );
break;
case QtopiaNetworkInterface::Up:
case QtopiaNetworkInterface::Pending:
case QtopiaNetworkInterface::Demand:
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Interface already started/active.") );
break;
default:
break;
}
qLog(Network) << "LAN interface cannot be started "
<< configIface->configFile();
return false;
}
if ( writeToSystem ) {
qLog(Network) << "Installing new set of configuration for " << deviceName;
QStringList params;
params << "install";
params << deviceName;
if ( dhcp ) {
// ### install <iface> dhcp
// dhcp takes care of everything
params << "dhcp";
} else {
// ### install <iface> static <ip> <netmask> <broadcast> <gateway>
params << "static";
bool missingOption = false;
QString temp = prop.value("Properties/IPADDR").toString();
if ( temp.isEmpty() ) {
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("IP address missing.") );
qLog(Network) << "IP address missing";
missingOption = true;
} else {
params << temp;
}
if ( missingOption )
return false;
temp = prop.value("Properties/SUBNET").toString();
if ( temp.isEmpty() ) {
qLog(Network) << "Subnet mask missing";
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Subnet mask missing.") );
missingOption = true;
} else {
params << temp;
}
if ( missingOption )
return false;
QString ip = temp; //save ip in case we need it as gateway address
temp = prop.value("Properties/BROADCAST").toString();
if ( temp.isEmpty() ) {
updateTrigger( QtopiaNetworkInterface::NotConnected,
tr("Broadcast address missing.") );
qLog(Network) << "Broadcast address missing";
missingOption = true;
} else {
params << temp;
}
if ( missingOption )
return false;
temp = prop.value("Properties/GATEWAY").toString();
if ( temp.isEmpty() ) {
qLog(Network) << "Gateway address missing. Using IP address.";
params << ip;
} else {
params << temp;
}
}
thread.addScriptToRun( lanScript, params );
#ifndef NO_WIRELESS_LAN
if ( t & QtopiaNetwork::WirelessLAN ) {
// ### install <iface> wireless
// ### [-essid <ESSID>] [-mode <Master|Managed|Ad-Hoc>]
// ### [-ap <AP>] [-bitrate <value>] [-nick <nickname>] [-channel <CHANNEL>]
// ### [-authmode <open|shared> -multikey <defaultKey> <key1> <key2> <key3> <key4>]
// ### [-authmode <open|shared> -phrase <passphrase> ]
// ### [-authmode <none> -nokey ]
// ### [-authmode <WPA-PSK> <password> <AES|TKIP>
// ### [-authmode <WPA-EAP> <TTLS|PEAP> <client cert> <server cert> ]
// ### [-authmode <WPA-EAP> <TLS> <identity> <password> ]
// ### [-keylength <128|64> ]
const QString keyPrefix = QString("WirelessNetworks/%1/").arg(netIndex);
params.clear();
params << "install";
params << deviceName;
params << "wireless";
QString temp = prop.value(keyPrefix+"WirelessMode").toString();
if ( !temp.isEmpty() ) {
params << "-mode";
params << temp;
}
temp = prop.value(keyPrefix+"ESSID").toString();
if ( !temp.isEmpty() ) {
params << "-essid";
params << Qtopia::shellQuote(temp);
if ( t & QtopiaNetwork::WirelessLAN ) {
wlanRegProvider->setAccessPoint( temp );
}
}
params << "-ap";
params << Qtopia::shellQuote( prop.value(keyPrefix+"AccessPoint").toString() );
temp = prop.value(keyPrefix+"BitRate").toString();
if ( !temp.isEmpty() ) {
params << "-bitrate";
params << temp;
}
temp = prop.value(keyPrefix+"Nickname").toString();
if ( !temp.isEmpty() ) {
params << "-nick";
params << Qtopia::shellQuote(temp);
}
temp = prop.value(keyPrefix+"CHANNEL").toString();
if ( !temp.isEmpty() ) {
params << "-channel";
params << temp;
}
temp = prop.value(keyPrefix+"KeyLength", QString("128")).toString();
params << "-keylength";
params << temp;
QString encryptMode = prop.value(keyPrefix+"Encryption", QString("open")).toString();
params << "-authmode";
params << encryptMode;
if ( encryptMode == "open" || encryptMode == "shared" ) {
const QString defaultKey = prop.value(keyPrefix+"SelectedKey").toString();
const QString pw = prop.value(keyPrefix+"PRIV_GENSTR").toString();
const bool isPassPhrase = defaultKey == "PP";
if ( isPassPhrase ) {
params << "-phrase";
params << Qtopia::shellQuote(pw);
} else {
params << "-multikey";
params << defaultKey.right(1);
for ( int i = 1; i<5; i++ ) {
params << Qtopia::shellQuote(
prop.value(keyPrefix+"WirelessKey_"+QString::number(i)).toString());
}
}
} else if ( encryptMode == QLatin1String("none") ) {
params << "-nokey";
} else if ( encryptMode == QLatin1String("WPA-PSK") ) {
params << Qtopia::shellQuote(prop.value(keyPrefix+QLatin1String("PRIV_GENSTR"), QLatin1String("")).toString());
params << prop.value(keyPrefix+QLatin1String("PSKAlgorithm"), QLatin1String("TKIP")).toString();
} else if ( encryptMode == QLatin1String("WPA-EAP") ) {
temp = prop.value(keyPrefix+QLatin1String("WPAEnterprise"), QLatin1String("TLS")).toString();
params << temp;
if ( temp == QLatin1String("TLS") ) {
params << prop.value(keyPrefix+QLatin1String("EAPIdentity")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPClientKeyPassword")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPClientKey")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPClientCert")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPServerCert")).toString();
} else if ( temp == QLatin1String("TTLS") || temp == QLatin1String("PEAP") ) {
params << prop.value(keyPrefix+QLatin1String("EAPIdentity")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPIdentityPassword")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPServerCert")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPAuthentication")).toString();
params << prop.value(keyPrefix+QLatin1String("EAPAnonIdentity")).toString();
} else {
qLog(Network) << QLatin1String("Unknown encryption algorithm for WPA Enterprise");
return false;
}
} else {
qLog(Network) << QLatin1String("Invalid encryption for WLAN:") << encryptMode;
return false;
}
thread.addScriptToRun( lanScript, params );
}
#endif
//Remove WriteToSystem value
QtopiaNetworkProperties p;
p.insert("Info/WriteToSystem", false);
configIface->writeProperties( p );
}
QStringList args;
// ### start <iface>
args << "start";
args << deviceName;
thread.addScriptToRun( lanScript, args );
//we have to wait a bit until this interface is actually online
//->then it can become the default gateway ->installs dns details as well
ifaceStatus = QtopiaNetworkInterface::Pending;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
delayedGatewayInstall = true;
return true;
}
void BluetoothImpl::timerEvent( QTimerEvent* /*e*/)
{
const QString peerID = configIface->property("Serial/PeerID").toString();
const QString logfile = Qtopia::tempDir() + "qpe-pppd-log-"+peerID;
if (state == Disappearing) {
if ( tidStateUpdate )
killTimer( tidStateUpdate );
tidStateUpdate = 0;
state = Initialize;
logIndex = 0;
dialupDev->releaseDUNConnection();
if (session) {
session->endSession();
delete session;
session = 0;
}
updateState();
qLog(Network) << "Stopping ppp script monitor";
return;
}
QFile logf( logfile );
if ( logf.open(QIODevice::ReadOnly) ) {
QString log = logf.readAll();
log.replace(QRegExp("\r"),"");
if ( logIndex > log.length() )
logIndex = 0;
switch ( state ) {
case Initialize:
{
int i = 0;
if ( log.indexOf(QRegExp("\nFailed"), logIndex)>=logIndex
|| log.indexOf(QRegExp("is locked by pid"), logIndex) >= logIndex
|| log.indexOf(QRegExp("Connect script failed"), logIndex) >= logIndex
|| log.indexOf(QRegExp("Connection refused"), logIndex) >= logIndex )
{
state = Disappearing;
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect chat failed.") );
qLog(Network) << "Connect chat failed";
return;
}
if ( log.indexOf(QRegExp("\nNO DIALTONE"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nNO CARRIER"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nERROR"), logIndex)>=logIndex
|| log.indexOf(QRegExp("\nBUSY"), logIndex)>=logIndex )
{
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect chat not responding.") );
qLog(Network) << "Connect chat not responding";
state = Disappearing;
} else if ( (i=log.indexOf(QRegExp("Using interface ppp.*\n"), logIndex))>= logIndex ) {
//determine iface name;
int end = log.indexOf(QRegExp("\n"), i);
int begin = log.indexOf(QRegExp("ppp"), i);
pppIface = log.mid(begin, end-begin).toLatin1();
netSpace->setAttribute( "NetDevice", pppIface );
qLog(Network) << "using interface: " << pppIface;
logIndex = end;
state = Connect;
}
}
break;
case Connect:
{
int i = 0;
if ( (i=log.indexOf(QRegExp("\nPAP authentication failed"), logIndex))>=logIndex
|| (i=log.indexOf(QRegExp("\nCHAP authentication failed"), logIndex))>=logIndex
|| (i=log.indexOf(QRegExp("\nConnection terminated."), logIndex)) >=logIndex)
{
state = Disappearing;
pppIface = QByteArray();
netSpace->setAttribute( "NetDevice", pppIface );
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Authentication failed.") );
qLog(Network) << "Authentication failed";
} else if ( (i=log.indexOf(QRegExp("\nLocal IP address changed"), logIndex)) >= logIndex
|| (i=log.indexOf(QRegExp("\nlocal IP address"), logIndex)) >= logIndex )
{
logIndex = i;
ifaceStatus = QtopiaNetworkInterface::Up;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger();
state = Monitoring;
QStringList dns;
dns << "install";
dns << "dns";
thread.addScriptToRun( pppScript, dns );
} else if ( (i=log.indexOf(QRegExp("\nConnect script failed"), logIndex)) >= logIndex )
{
logIndex = i;
state = Disappearing;
pppIface = QByteArray();
netSpace->setAttribute( "NetDevice", pppIface );
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
updateTrigger( QtopiaNetworkInterface::UnknownError,
tr("Connect failed.") );
qLog(Network) << "Connect failed";
}
}
break;
case Monitoring:
{
int i;
if ( (i=log.indexOf(QRegExp("\nConnection terminated"), logIndex)) >= logIndex ) {
logIndex = i++;
qLog(Network) << "Connection terminated";
pppIface = QByteArray();
netSpace->setAttribute( "NetDevice", pppIface );
ifaceStatus = QtopiaNetworkInterface::Unavailable;
netSpace->setAttribute( "State", ifaceStatus );
state = Disappearing;
updateTrigger();
QtopiaNetwork::unsetDefaultGateway( configIface->configFile() );
}
}
break;
default:
break;
}
}
}
