/**
* @brief Default EP0 OUT callback.
* @details This function is used by the low level driver as default handler
* for EP0 OUT events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0out(USBDriver *usbp, usbep_t ep) {
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_RX:
/* Receive phase over, sending the zero sized status packet.*/
usbp->ep0state = USB_EP0_SENDING_STS;
usbPrepareTransmit(usbp, 0, NULL, 0);
chSysLockFromIsr();
usbStartTransmitI(usbp, 0);
chSysUnlockFromIsr();
return;
case USB_EP0_WAITING_STS:
/* Status packet received, it must be zero sized, invoking the callback
if defined.*/
if (usbGetReceiveTransactionSizeI(usbp, 0) != 0)
break;
if (usbp->ep0endcb != NULL)
usbp->ep0endcb(usbp);
usbp->ep0state = USB_EP0_WAITING_SETUP;
return;
default:
;
}
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
}
/**
* @brief Default EP0 IN callback.
* @details This function is used by the low level driver as default handler
* for EP0 IN events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0in(USBDriver *usbp, usbep_t ep) {
size_t max;
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_TX:
max = (size_t)get_hword(&usbp->setup[6]);
/* If the transmitted size is less than the requested size and it is a
multiple of the maximum packet size then a zero size packet must be
transmitted.*/
if ((usbp->ep0n < max) &&
((usbp->ep0n % usbp->epc[0]->in_maxsize) == 0U)) {
usbPrepareTransmit(usbp, 0, NULL, 0);
osalSysLockFromISR();
(void) usbStartTransmitI(usbp, 0);
osalSysUnlockFromISR();
usbp->ep0state = USB_EP0_WAITING_TX0;
return;
}
/* Falls into, it is intentional.*/
case USB_EP0_WAITING_TX0:
/* Transmit phase over, receiving the zero sized status packet.*/
usbp->ep0state = USB_EP0_WAITING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
usbPrepareReceive(usbp, 0, NULL, 0);
osalSysLockFromISR();
(void) usbStartReceiveI(usbp, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
return;
case USB_EP0_SENDING_STS:
/* Status packet sent, invoking the callback if defined.*/
if (usbp->ep0endcb != NULL) {
usbp->ep0endcb(usbp);
}
usbp->ep0state = USB_EP0_WAITING_SETUP;
return;
case USB_EP0_WAITING_SETUP:
case USB_EP0_WAITING_STS:
case USB_EP0_RX:
/* All the above are invalid states in the IN phase.*/
osalDbgAssert(false, "EP0 state machine error");
/* Falling through is intentional.*/
case USB_EP0_ERROR:
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
default:
osalDbgAssert(false, "EP0 state machine invalid state");
}
}
/**
* @brief Stalls an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @return The operation status.
* @retval false Endpoint stalled.
* @retval true Endpoint busy, not stalled.
*
* @iclass
*/
bool usbStallTransmitI(USBDriver *usbp, usbep_t ep) {
osalDbgCheckClassI();
osalDbgCheck(usbp != NULL);
if (usbGetTransmitStatusI(usbp, ep))
return true;
usb_lld_stall_in(usbp, ep);
return false;
}
/**
* @brief Stalls an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @return The operation status.
* @retval FALSE Endpoint stalled.
* @retval TRUE Endpoint busy, not stalled.
*
* @iclass
*/
bool_t usbStallTransmitI(USBDriver *usbp, usbep_t ep) {
chDbgCheckClassI();
chDbgCheck(usbp != NULL, "usbStallTransmitI");
if (usbGetTransmitStatusI(usbp, ep))
return TRUE;
usb_lld_stall_in(usbp, ep);
return FALSE;
}
/**
* @brief Default EP0 OUT callback.
* @details This function is used by the low level driver as default handler
* for EP0 OUT events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0out(USBDriver *usbp, usbep_t ep) {
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_RX:
/* Receive phase over, sending the zero sized status packet.*/
usbp->ep0state = USB_EP0_SENDING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
usbPrepareTransmit(usbp, 0, NULL, 0);
osalSysLockFromISR();
(void) usbStartTransmitI(usbp, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
return;
case USB_EP0_WAITING_STS:
/* Status packet received, it must be zero sized, invoking the callback
if defined.*/
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
if (usbGetReceiveTransactionSizeI(usbp, 0) != 0U) {
break;
}
#endif
if (usbp->ep0endcb != NULL) {
usbp->ep0endcb(usbp);
}
usbp->ep0state = USB_EP0_WAITING_SETUP;
return;
case USB_EP0_WAITING_SETUP:
case USB_EP0_TX:
case USB_EP0_WAITING_TX0:
case USB_EP0_SENDING_STS:
/* All the above are invalid states in the IN phase.*/
osalDbgAssert(false, "EP0 state machine error");
/* Falling through is intentional.*/
case USB_EP0_ERROR:
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
default:
osalDbgAssert(false, "EP0 state machine invalid state");
}
}
/**
* @brief Default EP0 IN callback.
* @details This function is used by the low level driver as default handler
* for EP0 IN events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0in(USBDriver *usbp, usbep_t ep) {
size_t max;
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_TX:
max = usbFetchWord(&usbp->setup[6]);
/* If the transmitted size is less than the requested size and it is a
multiple of the maximum packet size then a zero size packet must be
transmitted.*/
if ((usbp->ep0n < max) && ((usbp->ep0n % usbp->epc[0]->in_maxsize) == 0)) {
usbPrepareTransmit(usbp, 0, NULL, 0);
chSysLockFromIsr();
usbStartTransmitI(usbp, 0);
chSysUnlockFromIsr();
usbp->ep0state = USB_EP0_WAITING_TX0;
return;
}
/* Falls into, it is intentional.*/
case USB_EP0_WAITING_TX0:
/* Transmit phase over, receiving the zero sized status packet.*/
usbp->ep0state = USB_EP0_WAITING_STS;
usbPrepareReceive(usbp, 0, NULL, 0);
chSysLockFromIsr();
usbStartReceiveI(usbp, 0);
chSysUnlockFromIsr();
return;
case USB_EP0_SENDING_STS:
/* Status packet sent, invoking the callback if defined.*/
if (usbp->ep0endcb != NULL)
usbp->ep0endcb(usbp);
usbp->ep0state = USB_EP0_WAITING_SETUP;
return;
default:
;
}
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
}
/**
* @brief Standard requests handler.
* @details This is the standard requests default handler, most standard
* requests are handled here, the user can override the standard
* handling using the @p requests_hook_cb hook in the
* @p USBConfig structure.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The request handling exit code.
* @retval false Request not recognized by the handler or error.
* @retval true Request handled.
*/
static bool default_handler(USBDriver *usbp) {
const USBDescriptor *dp;
/* Decoding the request.*/
switch (((usbp->setup[0] & (USB_RTYPE_RECIPIENT_MASK |
USB_RTYPE_TYPE_MASK)) |
(usbp->setup[1] << 8))) {
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_GET_STATUS << 8):
/* Just returns the current status word.*/
usbSetupTransfer(usbp, (uint8_t *)&usbp->status, 2, NULL);
return true;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_CLEAR_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status &= ~2;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_SET_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status |= 2;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_SET_ADDRESS << 8):
/* The SET_ADDRESS handling can be performed here or postponed after
the status packed depending on the USB_SET_ADDRESS_MODE low
driver setting.*/
#if USB_SET_ADDRESS_MODE == USB_EARLY_SET_ADDRESS
if ((usbp->setup[0] == USB_RTYPE_RECIPIENT_DEVICE) &&
(usbp->setup[1] == USB_REQ_SET_ADDRESS))
set_address(usbp);
usbSetupTransfer(usbp, NULL, 0, NULL);
#else
usbSetupTransfer(usbp, NULL, 0, set_address);
#endif
return true;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_GET_DESCRIPTOR << 8):
/* Handling descriptor requests from the host.*/
dp = usbp->config->get_descriptor_cb(
usbp, usbp->setup[3], usbp->setup[2],
usbFetchWord(&usbp->setup[4]));
if (dp == NULL)
return false;
usbSetupTransfer(usbp, (uint8_t *)dp->ud_string, dp->ud_size, NULL);
return true;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_GET_CONFIGURATION << 8):
/* Returning the last selected configuration.*/
usbSetupTransfer(usbp, &usbp->configuration, 1, NULL);
return true;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_SET_CONFIGURATION << 8):
/* Handling configuration selection from the host.*/
usbp->configuration = usbp->setup[2];
if (usbp->configuration == 0)
usbp->state = USB_SELECTED;
else
usbp->state = USB_ACTIVE;
_usb_isr_invoke_event_cb(usbp, USB_EVENT_CONFIGURED);
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case USB_RTYPE_RECIPIENT_INTERFACE | (USB_REQ_GET_STATUS << 8):
case USB_RTYPE_RECIPIENT_ENDPOINT | (USB_REQ_SYNCH_FRAME << 8):
/* Just sending two zero bytes, the application can change the behavior
using a hook..*/
usbSetupTransfer(usbp, (uint8_t *)zero_status, 2, NULL);
return true;
case USB_RTYPE_RECIPIENT_ENDPOINT | (USB_REQ_GET_STATUS << 8):
/* Sending the EP status.*/
if (usbp->setup[4] & 0x80) {
switch (usb_lld_get_status_in(usbp, usbp->setup[4] & 0x0F)) {
case EP_STATUS_STALLED:
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
return true;
case EP_STATUS_ACTIVE:
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
return true;
default:
return false;
}
}
else {
switch (usb_lld_get_status_out(usbp, usbp->setup[4] & 0x0F)) {
case EP_STATUS_STALLED:
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
return true;
case EP_STATUS_ACTIVE:
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
return true;
default:
return false;
}
}
case USB_RTYPE_RECIPIENT_ENDPOINT | (USB_REQ_CLEAR_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT)
return false;
/* Clearing the EP status, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0F) > 0) {
if (usbp->setup[4] & 0x80)
usb_lld_clear_in(usbp, usbp->setup[4] & 0x0F);
else
usb_lld_clear_out(usbp, usbp->setup[4] & 0x0F);
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case USB_RTYPE_RECIPIENT_ENDPOINT | (USB_REQ_SET_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT)
return false;
/* Stalling the EP, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0F) > 0) {
if (usbp->setup[4] & 0x80)
usb_lld_stall_in(usbp, usbp->setup[4] & 0x0F);
else
usb_lld_stall_out(usbp, usbp->setup[4] & 0x0F);
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case USB_RTYPE_RECIPIENT_DEVICE | (USB_REQ_SET_DESCRIPTOR << 8):
case USB_RTYPE_RECIPIENT_INTERFACE | (USB_REQ_CLEAR_FEATURE << 8):
case USB_RTYPE_RECIPIENT_INTERFACE | (USB_REQ_SET_FEATURE << 8):
case USB_RTYPE_RECIPIENT_INTERFACE | (USB_REQ_GET_INTERFACE << 8):
case USB_RTYPE_RECIPIENT_INTERFACE | (USB_REQ_SET_INTERFACE << 8):
/* All the above requests are not handled here, if you need them then
use the hook mechanism and provide handling.*/
default:
return false;
}
}
/**
* @brief Default EP0 SETUP callback.
* @details This function is used by the low level driver as default handler
* for EP0 SETUP events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0setup(USBDriver *usbp, usbep_t ep) {
size_t max;
usbp->ep0state = USB_EP0_WAITING_SETUP;
usbReadSetup(usbp, ep, usbp->setup);
/* First verify if the application has an handler installed for this
request.*/
if (!(usbp->config->requests_hook_cb) ||
!(usbp->config->requests_hook_cb(usbp))) {
/* Invoking the default handler, if this fails then stalls the
endpoint zero as error.*/
if (((usbp->setup[0] & USB_RTYPE_TYPE_MASK) != USB_RTYPE_TYPE_STD) ||
!default_handler(usbp)) {
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
}
}
#if (USB_SET_ADDRESS_ACK_HANDLING == USB_SET_ADDRESS_ACK_HW)
if (usbp->setup[1] == USB_REQ_SET_ADDRESS) {
/* Zero-length packet sent by hardware */
return;
}
#endif
/* Transfer preparation. The request handler must have populated
correctly the fields ep0next, ep0n and ep0endcb using the macro
usbSetupTransfer().*/
max = usbFetchWord(&usbp->setup[6]);
/* The transfer size cannot exceed the specified amount.*/
if (usbp->ep0n > max)
usbp->ep0n = max;
if ((usbp->setup[0] & USB_RTYPE_DIR_MASK) == USB_RTYPE_DIR_DEV2HOST) {
/* IN phase.*/
if (usbp->ep0n > 0) {
/* Starts the transmit phase.*/
usbp->ep0state = USB_EP0_TX;
usbPrepareTransmit(usbp, 0, usbp->ep0next, usbp->ep0n);
osalSysLockFromISR();
usbStartTransmitI(usbp, 0);
osalSysUnlockFromISR();
}
else {
/* No transmission phase, directly receiving the zero sized status
packet.*/
usbp->ep0state = USB_EP0_WAITING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
usbPrepareReceive(usbp, 0, NULL, 0);
osalSysLockFromISR();
usbStartReceiveI(usbp, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
}
}
else {
/* OUT phase.*/
if (usbp->ep0n > 0) {
/* Starts the receive phase.*/
usbp->ep0state = USB_EP0_RX;
usbPrepareReceive(usbp, 0, usbp->ep0next, usbp->ep0n);
osalSysLockFromISR();
usbStartReceiveI(usbp, 0);
osalSysUnlockFromISR();
}
else {
/* No receive phase, directly sending the zero sized status
packet.*/
usbp->ep0state = USB_EP0_SENDING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
usbPrepareTransmit(usbp, 0, NULL, 0);
osalSysLockFromISR();
usbStartTransmitI(usbp, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
}
}
}
/**
* @brief Standard requests handler.
* @details This is the standard requests default handler, most standard
* requests are handled here, the user can override the standard
* handling using the @p requests_hook_cb hook in the
* @p USBConfig structure.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The request handling exit code.
* @retval false Request not recognized by the handler or error.
* @retval true Request handled.
*/
static bool default_handler(USBDriver *usbp) {
const USBDescriptor *dp;
/* Decoding the request.*/
switch ((((uint32_t)usbp->setup[0] & (USB_RTYPE_RECIPIENT_MASK |
USB_RTYPE_TYPE_MASK)) |
((uint32_t)usbp->setup[1] << 8U))) {
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_STATUS << 8):
/* Just returns the current status word.*/
usbSetupTransfer(usbp, (uint8_t *)&usbp->status, 2, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status &= ~2U;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status |= 2U;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_ADDRESS << 8):
/* The SET_ADDRESS handling can be performed here or postponed after
the status packed depending on the USB_SET_ADDRESS_MODE low
driver setting.*/
#if USB_SET_ADDRESS_MODE == USB_EARLY_SET_ADDRESS
if ((usbp->setup[0] == USB_RTYPE_RECIPIENT_DEVICE) &&
(usbp->setup[1] == USB_REQ_SET_ADDRESS)) {
set_address(usbp);
}
usbSetupTransfer(usbp, NULL, 0, NULL);
#else
usbSetupTransfer(usbp, NULL, 0, set_address);
#endif
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_DESCRIPTOR << 8):
/* Handling descriptor requests from the host.*/
dp = usbp->config->get_descriptor_cb(usbp, usbp->setup[3],
usbp->setup[2],
get_hword(&usbp->setup[4]));
if (dp == NULL) {
return false;
}
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)dp->ud_string, dp->ud_size, NULL);
/*lint -restore*/
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_CONFIGURATION << 8):
/* Returning the last selected configuration.*/
usbSetupTransfer(usbp, &usbp->configuration, 1, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_CONFIGURATION << 8):
/* Handling configuration selection from the host only if it is different
from the current configuration.*/
if (usbp->configuration != usbp->setup[2]) {
/* If the USB device is already active then we have to perform the clear
procedure on the current configuration.*/
if (usbp->state == USB_ACTIVE) {
/* Current configuration cleared.*/
osalSysLockFromISR ();
usbDisableEndpointsI(usbp);
osalSysUnlockFromISR ();
usbp->configuration = 0U;
usbp->state = USB_SELECTED;
_usb_isr_invoke_event_cb(usbp, USB_EVENT_UNCONFIGURED);
}
if (usbp->setup[2] != 0U) {
/* New configuration.*/
usbp->configuration = usbp->setup[2];
usbp->state = USB_ACTIVE;
_usb_isr_invoke_event_cb(usbp, USB_EVENT_CONFIGURED);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_GET_STATUS << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_SYNCH_FRAME << 8):
/* Just sending two zero bytes, the application can change the behavior
using a hook..*/
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)zero_status, 2, NULL);
/*lint -restore*/
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_GET_STATUS << 8):
/* Sending the EP status.*/
if ((usbp->setup[4] & 0x80U) != 0U) {
switch (usb_lld_get_status_in(usbp, usbp->setup[4] & 0x0FU)) {
case EP_STATUS_STALLED:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_ACTIVE:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_DISABLED:
default:
return false;
}
}
else {
switch (usb_lld_get_status_out(usbp, usbp->setup[4] & 0x0FU)) {
case EP_STATUS_STALLED:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_ACTIVE:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_DISABLED:
default:
return false;
}
}
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT) {
return false;
}
/* Clearing the EP status, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0FU) != 0U) {
if ((usbp->setup[4] & 0x80U) != 0U) {
usb_lld_clear_in(usbp, usbp->setup[4] & 0x0FU);
}
else {
usb_lld_clear_out(usbp, usbp->setup[4] & 0x0FU);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_SET_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT) {
return false;
}
/* Stalling the EP, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0FU) != 0U) {
if ((usbp->setup[4] & 0x80U) != 0U) {
usb_lld_stall_in(usbp, usbp->setup[4] & 0x0FU);
}
else {
usb_lld_stall_out(usbp, usbp->setup[4] & 0x0FU);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_DESCRIPTOR << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_SET_FEATURE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_GET_INTERFACE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_SET_INTERFACE << 8):
/* All the above requests are not handled here, if you need them then
use the hook mechanism and provide handling.*/
default:
return false;
}
}
