int main(void)
{
// Stack limit should be less than real stack size, so we
// had chance to recover from limit hit.
mp_stack_set_limit((char*)&_ram_end - (char*)&_heap_end - 1024);
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
// basic sub-system init
pendsv_init();
timer_tim3_init();
led_init();
soft_reset:
// check if user switch held to select the reset mode
led_state(LED_RED, 1);
led_state(LED_GREEN, 1);
led_state(LED_BLUE, 1);
#if MICROPY_HW_ENABLE_RTC
rtc_init();
#endif
// GC init
gc_init(&_heap_start, &_heap_end);
// Micro Python init
mp_init();
mp_obj_list_init(mp_sys_path, 0);
mp_obj_list_init(mp_sys_argv, 0);
readline_init0();
pin_init0();
extint_init0();
timer_init0();
rng_init0();
i2c_init0();
spi_init0();
uart_init0();
pyb_usb_init0();
usbdbg_init();
if (sensor_init() != 0) {
__fatal_error("Failed to init sensor");
}
/* Export functions to the global python namespace */
mp_store_global(qstr_from_str("randint"), (mp_obj_t)&py_randint_obj);
mp_store_global(qstr_from_str("cpu_freq"), (mp_obj_t)&py_cpu_freq_obj);
mp_store_global(qstr_from_str("Image"), (mp_obj_t)&py_image_load_image_obj);
mp_store_global(qstr_from_str("HaarCascade"), (mp_obj_t)&py_image_load_cascade_obj);
mp_store_global(qstr_from_str("FreakDesc"), (mp_obj_t)&py_image_load_descriptor_obj);
mp_store_global(qstr_from_str("FreakDescSave"), (mp_obj_t)&py_image_save_descriptor_obj);
mp_store_global(qstr_from_str("LBPDesc"), (mp_obj_t)&py_image_load_lbp_obj);
mp_store_global(qstr_from_str("vcp_is_connected"), (mp_obj_t)&py_vcp_is_connected_obj);
if (sdcard_is_present()) {
sdcard_init();
FRESULT res = f_mount(&fatfs, "1:", 1);
if (res != FR_OK) {
__fatal_error("could not mount SD\n");
}
// Set CWD and USB medium to SD
f_chdrive("1:");
pyb_usb_storage_medium = PYB_USB_STORAGE_MEDIUM_SDCARD;
} else {
storage_init();
// try to mount the flash
FRESULT res = f_mount(&fatfs, "0:", 1);
if (res == FR_NO_FILESYSTEM) {
// create a fresh fs
make_flash_fs();
} else if (res != FR_OK) {
__fatal_error("could not access LFS\n");
}
// Set CWD and USB medium to flash
f_chdrive("0:");
pyb_usb_storage_medium = PYB_USB_STORAGE_MEDIUM_FLASH;
}
// turn boot-up LEDs off
led_state(LED_RED, 0);
led_state(LED_GREEN, 0);
led_state(LED_BLUE, 0);
// init USB device to default setting if it was not already configured
if (!(pyb_usb_flags & PYB_USB_FLAG_USB_MODE_CALLED)) {
pyb_usb_dev_init(USBD_VID, USBD_PID_CDC_MSC, USBD_MODE_CDC_MSC, NULL);
}
// Run the main script from the current directory.
FRESULT res = f_stat("main.py", NULL);
if (res == FR_OK) {
if (!pyexec_file("main.py")) {
nlr_buf_t nlr;
if (nlr_push(&nlr) == 0) {
flash_error(3);
nlr_pop();
}
}
}
// Enter REPL
nlr_buf_t nlr;
for (;;) {
if (nlr_push(&nlr) == 0) {
while (usbdbg_script_ready()) {
nlr_buf_t nlr;
vstr_t *script_buf = usbdbg_get_script();
// clear script flag
usbdbg_clr_script();
// execute the script
if (nlr_push(&nlr) == 0) {
pyexec_push_scope();
// parse and compile script
mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_,
vstr_str(script_buf), vstr_len(script_buf), 0);
mp_parse_node_t pn = mp_parse(lex, MP_PARSE_FILE_INPUT);
mp_obj_t script = mp_compile(pn, lex->source_name, MP_EMIT_OPT_NONE, false);
// execute the script
mp_call_function_0(script);
nlr_pop();
} else {
mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
}
pyexec_pop_scope();
}
// clear script flag
usbdbg_clr_script();
// no script run REPL
pyexec_friendly_repl();
nlr_pop();
}
}
printf("PYB: sync filesystems\n");
storage_flush();
printf("PYB: soft reboot\n");
goto soft_reset;
}
int main(void)
{
FRESULT f_res;
int sensor_init_ret;
// Stack limit should be less than real stack size, so we
// had chance to recover from limit hit.
mp_stack_set_limit((char*)&_ram_end - (char*)&_heap_end - 1024);
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
// basic sub-system init
pendsv_init();
timer_tim3_init();
led_init();
soft_reset:
// check if user switch held to select the reset mode
led_state(LED_RED, 1);
led_state(LED_GREEN, 1);
led_state(LED_BLUE, 1);
#if MICROPY_HW_ENABLE_RTC
rtc_init();
#endif
// GC init
gc_init(&_heap_start, &_heap_end);
// Micro Python init
mp_init();
mp_obj_list_init(mp_sys_path, 0);
mp_obj_list_init(mp_sys_argv, 0);
readline_init0();
pin_init0();
extint_init0();
timer_init0();
rng_init0();
i2c_init0();
spi_init0();
uart_init0();
pyb_usb_init0();
usbdbg_init();
sensor_init_ret = sensor_init();
/* Export functions to the global python namespace */
mp_store_global(qstr_from_str("randint"), (mp_obj_t)&py_randint_obj);
mp_store_global(qstr_from_str("cpu_freq"), (mp_obj_t)&py_cpu_freq_obj);
mp_store_global(qstr_from_str("vcp_is_connected"), (mp_obj_t)&py_vcp_is_connected_obj);
if (sdcard_is_present()) {
sdcard_init();
FRESULT res = f_mount(&fatfs, "1:", 1);
if (res != FR_OK) {
__fatal_error("could not mount SD\n");
}
// Set CWD and USB medium to SD
f_chdrive("1:");
pyb_usb_storage_medium = PYB_USB_STORAGE_MEDIUM_SDCARD;
} else {
storage_init();
// try to mount the flash
FRESULT res = f_mount(&fatfs, "0:", 1);
if (res == FR_NO_FILESYSTEM) {
// create a fresh fs
make_flash_fs();
} else if (res != FR_OK) {
__fatal_error("could not access LFS\n");
}
// Set CWD and USB medium to flash
f_chdrive("0:");
pyb_usb_storage_medium = PYB_USB_STORAGE_MEDIUM_FLASH;
}
// turn boot-up LEDs off
led_state(LED_RED, 0);
led_state(LED_GREEN, 0);
led_state(LED_BLUE, 0);
// init USB device to default setting if it was not already configured
if (!(pyb_usb_flags & PYB_USB_FLAG_USB_MODE_CALLED)) {
pyb_usb_dev_init(USBD_VID, USBD_PID_CDC_MSC, USBD_MODE_CDC_MSC, NULL);
}
// check sensor init result
if (sensor_init_ret != 0) {
char buf[512];
snprintf(buf, sizeof(buf), "Failed to init sensor, error:%d", sensor_init_ret);
__fatal_error(buf);
}
// Run self tests the first time only
f_res = f_stat("selftest.py", NULL);
if (f_res == FR_OK) {
nlr_buf_t nlr;
if (nlr_push(&nlr) == 0) {
// Parse, compile and execute the self-tests script.
pyexec_file("selftest.py");
nlr_pop();
} else {
// Get the exception message. TODO: might be a hack.
mp_obj_str_t *str = mp_obj_exception_get_value((mp_obj_t)nlr.ret_val);
// If any of the self-tests fail log the exception message
// and loop forever. Note: IDE exceptions will not be caught.
__fatal_error((const char*) str->data);
}
// Success: remove self tests script and flush cache
f_unlink("selftest.py");
storage_flush();
}
// Run the main script from the current directory.
f_res = f_stat("main.py", NULL);
if (f_res == FR_OK) {
nlr_buf_t nlr;
if (nlr_push(&nlr) == 0) {
// Parse, compile and execute the main script.
pyexec_file("main.py");
nlr_pop();
} else {
mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
if (nlr_push(&nlr) == 0) {
flash_error(3);
nlr_pop();
}// if this gets interrupted again ignore it.
}
}
// Enter REPL
nlr_buf_t nlr;
for (;;) {
if (nlr_push(&nlr) == 0) {
while (usbdbg_script_ready()) {
nlr_buf_t nlr;
vstr_t *script_buf = usbdbg_get_script();
// clear debugging flags
usbdbg_clear_flags();
// re-init MP
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
mp_init();
MICROPY_END_ATOMIC_SECTION(atomic_state);
// execute the script
if (nlr_push(&nlr) == 0) {
// parse, compile and execute script
pyexec_str(script_buf);
nlr_pop();
} else {
mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
}
}
// clear debugging flags
usbdbg_clear_flags();
// re-init MP
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
mp_init();
MICROPY_END_ATOMIC_SECTION(atomic_state);
// no script run REPL
pyexec_friendly_repl();
nlr_pop();
}
}
printf("PYB: sync filesystems\n");
storage_flush();
printf("PYB: soft reboot\n");
goto soft_reset;
}
