C++ (Cpp) utest_printの例

コード例 #1

0

ファイルを表示

ファイル: utest.c プロジェクト: DaroDarioli/tp_laboratorio_1

void utest_startTest(void(*fncTest)(void),void(*fncBefore)(void),char* testName)
{
	if(fncTest!=0)
	{
	    utest_print("--------------------------------------------------------------------\r\n");
		utest_flagTestError=0;
		utest_print1("%-40s\r\n",testName);

		if(fncBefore!=0)
			fncBefore();
		utest_totalTestsCounter++;
		fncTest();
		if(utest_flagTestError==1)
		{
			utest_print2("TEST FAILED\r\nFILE:%s LINE:%d\r\n",utest_fileTestError,utest_lineTestError);
		}
		else
		{
			utest_print("TEST OK\r\n");
			utest_okTestsCounter++;
		}


	}
}

コード例 #2

0

ファイルを表示

ファイル: utest.c プロジェクト: DaroDarioli/tp_laboratorio_1

void utest_printStatistics(char* testName)
{


    if(utest_totalTestsCounter!=utest_okTestsCounter || VERBOSE_TEST == 1)
    {
        printf(utest_printErrorBuffer);
    }
    utest_printErrorBuffer[0] = '\0';  // CLEAN ERROR BUFFER

    utest_print("********************************************************************\r\n");
	utest_print1("*******   Unit Tests Statistics: %20s   ************\r\n",testName);
    utest_print("********************************************************************\r\n");

	if(utest_totalTestsCounter>0)
	{
		int per = (int)(((float)utest_okTestsCounter/(float)utest_totalTestsCounter)*100.0);
        utest_print("**| Total Test  |  Succed Test  |  Failed Test  |  Effectiveness |**\r\n");
       utest_print4("**|    %3d      |      %3d      |      %3d      |     %3d perc.  |**\r\n",utest_totalTestsCounter,utest_okTestsCounter,(utest_totalTestsCounter-utest_okTestsCounter),per);
	}
	else
		utest_print("No tests executed.\r\n");

    utest_print("********************************************************************\r\n\r\n");

    printf(utest_printErrorBuffer);
    utest_printErrorBuffer[0] = '\0'; // CLEAN ERROR BUFFER
}

コード例 #3

0

ファイルを表示

ファイル: utest.c プロジェクト: DaroDarioli/tp_laboratorio_1

void utest_printStartTesting(char* testName)
{
    utest_printErrorBuffer[0] = '\0';
    utest_print("\r\n\r\n********************************************************************\r\n");
	utest_print1("***********    Start Testing of: %20s   ************\r\n",testName);
    utest_print("********************************************************************\r\n");

}

コード例 #4

0

ファイルを表示

ファイル: utest.c プロジェクト: martinribelotta/micropython

void utest_printStatistics(void)
{
	utest_print("Unit Tests Statistics\r\n");
	if(utest_totalTestsCounter>0)
	{
		int per = (int)(((float)utest_okTestsCounter/(float)utest_totalTestsCounter)*100.0);
		utest_print1("Tests OK : %d %%\r\n",per);
		utest_print2("Tests: %d. Failed Tests: %d\r\n",utest_totalTestsCounter,(utest_totalTestsCounter-utest_okTestsCounter));
	}
	else
		utest_print("No tests executed.\r\n");

}

コード例 #5

0

ファイルを表示

ファイル: thirdTest.c プロジェクト: mavocado3/utest

void thirdTestSetup(void)
{
	int i;
	utest_print("Setup...\r\n");
    initEmployees(arrayEmployees, LENGTH);
    for(i=0; i < LENGTH; i++)
    {
        addEmployee(arrayEmployees, LENGTH,id[i],unsortedList[i],unsortedList[i],salary[i],sector[i]);
    }
}

コード例 #6

0

ファイルを表示

ファイル: eleventhTest.c プロジェクト: Blacknux/ArrayList

void eleventhTestSetup(void)
{
	utest_print("Setup...\r\n");
}

コード例 #7

0

ファイルを表示

ファイル: fifthTest.c プロジェクト: mbrino/tp4_laboratori

void fifthTestSetup(void)
{
	utest_print("Setup...\r\n");
}

コード例 #8

0

ファイルを表示

ファイル: secondTest.c プロジェクト: mavocado3/utest

void secondTestSetup(void)
{
	utest_print("Setup...\r\n");
    initEmployees(arrayEmployees, LENGTH);

}

コード例 #9

0

ファイルを表示

ファイル: secondTest.c プロジェクト: davilamr/utest

void secondTestSetup(void)
{
	utest_print("Setup...\r\n");
}

コード例 #10

0

ファイルを表示

ファイル: mainTest.c プロジェクト: martinribelotta/micropython

void startTesting(void)
{
    utest_print("Starting C testings...\r\n");

	utest_init();


	// LEDS Library
	utest_startTest(testLeds1,0,"LEDS: On Off Test");
	utest_startTest(testLeds2,0,"LEDS: Pwm Test");
	utest_startTest(testLeds3,0,"LEDS: Toogle Test");
    utest_print("____________________\r\n");

	// Switches Library
	utest_startTest(testSwitches1,0,"SW: idle status check");
    utest_print("____________________\r\n");

	// Uart Library
	utest_startTest(testUart1,testUartSetup,"UART: TX test");
	utest_startTest(testUart2,testUartSetup,"UART: RX polling test");
	utest_startTest(testUart3,testUartSetup,"UART: RX buffer test");
    utest_print("____________________\r\n");

	// EEPROM Library
	utest_startTest(testEEPROM1,0,"EEPROM: write/read byte Test");
	utest_startTest(testEEPROM2,0,"EEPROM: write invalid address Test");
	utest_startTest(testEEPROM3,0,"EEPROM: read invalid address Test");
    utest_print("____________________\r\n");

	// DAC Library
	utest_startTest(testDAC1,0,"DAC: write value Test");
	utest_startTest(testDAC2,0,"DAC: write invalid value Test");
	utest_startTest(testDAC3,0,"DAC: write table Test");
	utest_startTest(testDAC4,0,"DAC: write invalid table Test");
    utest_print("____________________\r\n");

	// ADC Library
    utest_startTest(testADC1,0,"ADC: enable chn 1 Test");
    utest_startTest(testADC2,0,"ADC: enable chn 2 Test");
    utest_startTest(testADC3,0,"ADC: enable chn 3 Test");
    utest_startTest(testADC4,0,"ADC: enable chn invalid Test");
    utest_startTest(testADC5,0,"ADC: read chn 1 Test");
    utest_startTest(testADC6,0,"ADC: read chn 2 Test");
    utest_startTest(testADC7,0,"ADC: read chn 3 Test");
    utest_startTest(testADC8,0,"ADC: read chn invalid Test");
    utest_print("____________________\r\n");

	// GPIO
    utest_startTest(testGPIO1,0,"GPIO: configure gpio0 input Test");
    utest_startTest(testGPIO2,0,"GPIO: configure gpio8 input Test");
    utest_startTest(testGPIO3,0,"GPIO: configure invalid gpio Test");
    utest_startTest(testGPIO4,0,"GPIO: configure invalid mode Test");
    utest_startTest(testGPIO5,0,"GPIO: configure invalid pull mode Test");
    utest_startTest(testGPIO6,0,"GPIO: read with pullup Test");
    utest_startTest(testGPIO7,0,"GPIO: read with pulldown Test");
    utest_startTest(testGPIO8,0,"GPIO: read invalid gpio Test");
    utest_startTest(testGPIO9,testGPIOwriteSetup,"GPIO: write 0 Test");
    utest_startTest(testGPIO10,testGPIOwriteSetup,"GPIO: write 1 Test");
    utest_startTest(testGPIO11,testGPIOwriteSetup,"GPIO: write invalid Test");

    utest_startTest(testGPIO12,testGPIOcallbackSetup,"GPIO: enable callback Test");
    utest_startTest(testGPIO13,testGPIOcallbackSetup,"GPIO: interrupt Test");
    utest_startTest(testGPIO14,testGPIOcallbackSetup,"GPIO: enable invalid Test");
    utest_print("____________________\r\n");


    // rs485 Uart Library
    utest_startTest(test485Uart1,test485UartSetup,"485 UART: TX test");
    utest_startTest(test485Uart2,test485UartSetup,"485 UART: RX polling test");
    utest_startTest(test485Uart3,test485UartSetup,"485 UART: RX buffer test");
    utest_print("____________________\r\n");

    // Timers Library
    utest_startTest(testTimers1,0,"TIMERS: configure timer Test");
    utest_startTest(testTimers2,0,"TIMERS: configure invalid timer Test");
    utest_startTest(testTimers3,testTimersSetup,"TIMERS: set callback Test");
    utest_startTest(testTimers4,testTimersSetup,"TIMERS: callback arg Test");
    utest_startTest(testTimers5,testTimersSetup,"TIMERS: set callback invalid Test");
    utest_startTest(testTimers6,testTimersSetup,"TIMERS: disable timer Test");
    utest_startTest(testTimers7,0,"TIMERS: disable timer invalid Test");

    utest_startTest(testTimers8,testTimersSetup,"TIMERS: set counter Test");
    utest_startTest(testTimers9,testTimersSetup,"TIMERS: set counter invalid Test");

    utest_startTest(testTimers10,testTimersSetup,"TIMERS: set prescaler Test");
    utest_startTest(testTimers11,testTimersSetup,"TIMERS: set prescaler invalid Test");

    utest_startTest(testTimers12,testTimersSetup,"TIMERS: get prescaler Test");
    utest_startTest(testTimers13,testTimersSetup,"TIMERS: get prescaler invalid Test");

    utest_startTest(testTimers14,testTimersSetup,"TIMERS: get counter Test");
    utest_startTest(testTimers15,testTimersSetup,"TIMERS: get counter invalid Test");

    utest_startTest(testTimers16,testTimersSetup,"TIMERS: set match Test");
    utest_startTest(testTimers17,testTimersSetup,"TIMERS: set match invalid Test");

    utest_startTest(testTimers18,testTimersSetup,"TIMERS: get match Test");
    utest_startTest(testTimers19,testTimersSetup,"TIMERS: get match invalid Test");

	utest_printStatistics();
}

コード例 #11

0

ファイルを表示

ファイル: thirdTest.c プロジェクト: Blacknux/ArrayList

void thirdTestSetup(void)
{
	utest_print("Setup...\r\n");
}

コード例 #12

0

ファイルを表示

ファイル: eighthTest.c プロジェクト: Blacknux/ArrayList

void eighthTestSetup(void)
{
	utest_print("Setup...\r\n");
}