コード例 #1
0
/**
* @brief : callback for virtqueue
*/
static void vq_hwkey_callback(struct virtqueue *vq)
{
    struct EmulHwkeyEvent hwkey_event;
#if 0
    printk(KERN_INFO "vq hwkey callback\n");
#endif
    while (1) {
        memcpy(&hwkey_event, &vh->vbuf[vqidx], sizeof(hwkey_event));
        if (hwkey_event.event_type == 0) {
            break;
        }
        printk(KERN_ERR "keycode: %d, event_type: %d, vqidx: %d\n", hwkey_event.keycode, hwkey_event.event_type, vqidx);
        if (hwkey_event.event_type == KEY_PRESSED) {
          input_event(vh->idev, EV_KEY, hwkey_event.keycode, true);
        }
        else if (hwkey_event.event_type == KEY_RELEASED) {
          input_event(vh->idev, EV_KEY, hwkey_event.keycode, false);
        }
        else {
          printk(KERN_ERR "Unknown event type\n");
          return;
        }

        input_sync(vh->idev);
        memset(&vh->vbuf[vqidx], 0x00, sizeof(hwkey_event));
        vqidx++;
        if (vqidx == MAX_BUF_COUNT) {
            vqidx = 0;
        }
    }

    virtqueue_kick(vh->vq);
}
コード例 #2
0
ファイル: virtio_input.c プロジェクト: Chong-Li/cse522
/*
 * On error we are losing the status update, which isn't critical as
 * this is typically used for stuff like keyboard leds.
 */
static int virtinput_send_status(struct virtio_input *vi,
				 u16 type, u16 code, s32 value)
{
	struct virtio_input_event *stsbuf;
	struct scatterlist sg[1];
	unsigned long flags;
	int rc;

	stsbuf = kzalloc(sizeof(*stsbuf), GFP_ATOMIC);
	if (!stsbuf)
		return -ENOMEM;

	stsbuf->type  = cpu_to_le16(type);
	stsbuf->code  = cpu_to_le16(code);
	stsbuf->value = cpu_to_le32(value);
	sg_init_one(sg, stsbuf, sizeof(*stsbuf));

	spin_lock_irqsave(&vi->lock, flags);
	if (vi->ready) {
		rc = virtqueue_add_outbuf(vi->sts, sg, 1, stsbuf, GFP_ATOMIC);
		virtqueue_kick(vi->sts);
	} else {
		rc = -ENODEV;
	}
	spin_unlock_irqrestore(&vi->lock, flags);

	if (rc != 0)
		kfree(stsbuf);
	return rc;
}
コード例 #3
0
/* called when an rx buffer is used, and it's time to digest a message */
static void rpmsg_recv_done(struct virtqueue *rvq)
{
	struct virtproc_info *vrp = rvq->vdev->priv;
	struct device *dev = &rvq->vdev->dev;
	struct rpmsg_hdr *msg;
	unsigned int len, msgs_received = 0;
	int err;

	msg = virtqueue_get_buf(rvq, &len);
	if (!msg) {
		dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
		return;
	}

	while (msg) {
		err = rpmsg_recv_single(vrp, dev, msg, len);
		if (err)
			break;

		msgs_received++;

		msg = virtqueue_get_buf(rvq, &len);
	};

	dev_dbg(dev, "Received %u messages\n", msgs_received);

	/* tell the remote processor we added another available rx buffer */
	if (msgs_received)
		virtqueue_kick(vrp->rvq);
}
コード例 #4
0
static void rpmsg_recv_done(struct virtqueue *rvq)
{
	struct rpmsg_hdr *msg;
	unsigned int len;
	struct rpmsg_endpoint *ept;
	struct scatterlist sg;
	unsigned long offset;
	void *sim_addr;
	struct virtproc_info *vrp = rvq->vdev->priv;
	struct device *dev = &rvq->vdev->dev;
	int err;

	/* if fail to acquire the lock, remove stage is happening, then just return */
	if(!mutex_trylock(&vrp->rm_lock))
		return;

	/* make sure the descriptors are updated before reading */
	rmb();
	msg = virtqueue_get_buf(rvq, &len);
	if (!msg) {
		dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
		return;
	}

	dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Unused: %d\n",
					msg->src, msg->dst, msg->len,
					msg->flags, msg->unused);
#if 0
	print_hex_dump(KERN_DEBUG, "rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
					msg, sizeof(*msg) + msg->len, true);
#endif

	/* fetch the callback of the appropriate user */
	spin_lock(&vrp->endpoints_lock);
	ept = idr_find(&vrp->endpoints, msg->dst);
	spin_unlock(&vrp->endpoints_lock);

	if (ept && ept->cb)
		ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
	else
		dev_warn(dev, "msg received with no recepient\n");

	/* add the buffer back to the remote processor's virtqueue */
	offset = ((unsigned long) msg) - ((unsigned long) vrp->rbufs);
	sim_addr = vrp->sim_base + offset;
	sg_init_one(&sg, sim_addr, sizeof(*msg) + len);

	err = virtqueue_add_buf_gfp(vrp->rvq, &sg, 0, 1, msg, GFP_KERNEL);
	if (err < 0) {
		dev_err(dev, "failed to add a virtqueue buffer: %d\n", err);
		return;
	}
	/* descriptors must be written before kicking remote processor */
	wmb();

	/* tell the remote processor we added another available rx buffer */
	virtqueue_kick(vrp->rvq);
	mutex_unlock(&vrp->rm_lock);
}
コード例 #5
0
/* called when an rx buffer is used, and it's time to digest a message */
static void rpmsg_recv_done(struct virtqueue *rvq)
{
	struct rpmsg_hdr *msg;
	unsigned int len;
	struct rpmsg_endpoint *ept;
	struct scatterlist sg;
	struct virtproc_info *vrp = rvq->vdev->priv;
	struct device *dev = &rvq->vdev->dev;
	int err;

	msg = virtqueue_get_buf(rvq, &len);
	if (!msg) {
		dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
		return;
	}

	dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
					msg->src, msg->dst, msg->len,
					msg->flags, msg->reserved);
#if 0
	print_hex_dump(KERN_DEBUG, "rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
					msg, sizeof(*msg) + msg->len, true);
#endif

	/*
	 * We currently use fixed-sized buffers, so trivially sanitize
	 * the reported payload length.
	 */
	if (len > RPMSG_BUF_SIZE ||
		msg->len > (len - sizeof(struct rpmsg_hdr))) {
		dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg->len);
		return;
	}

	/* use the dst addr to fetch the callback of the appropriate user */
	mutex_lock(&vrp->endpoints_lock);
	ept = idr_find(&vrp->endpoints, msg->dst);
	mutex_unlock(&vrp->endpoints_lock);

	if (ept && ept->cb)
		ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
	else
		dev_warn(dev, "msg received with no recepient\n");

	/* publish the real size of the buffer */
	sg_init_one(&sg, msg, RPMSG_BUF_SIZE);

	/* add the buffer back to the remote processor's virtqueue */
	err = virtqueue_add_buf(vrp->rvq, &sg, 0, 1, msg, GFP_KERNEL);
	if (err < 0) {
		dev_err(dev, "failed to add a virtqueue buffer: %d\n", err);
		return;
	}

	/* tell the remote processor we added another available rx buffer */
	virtqueue_kick(vrp->rvq);
}
コード例 #6
0
ファイル: virtio-rng.c プロジェクト: Anjali05/linux
/* The host will fill any buffer we give it with sweet, sweet randomness. */
static void register_buffer(struct virtrng_info *vi, u8 *buf, size_t size)
{
	struct scatterlist sg;

	sg_init_one(&sg, buf, size);

	/* There should always be room for one buffer. */
	virtqueue_add_inbuf(vi->vq, &sg, 1, buf, GFP_KERNEL);

	virtqueue_kick(vi->vq);
}
コード例 #7
0
ファイル: virtio-rng.c プロジェクト: 710leo/LVS
static void register_buffer(void)
{
	struct scatterlist sg;

	sg_init_one(&sg, random_data+data_left, RANDOM_DATA_SIZE-data_left);
	/* There should always be room for one buffer. */
	if (virtqueue_add_buf(vq, &sg, 0, 1, random_data) < 0)
		BUG();

	virtqueue_kick(vq);
}
コード例 #8
0
/* The host will fill any buffer we give it with sweet, sweet randomness. */
static void register_buffer(u8 *buf, size_t size)
{
	struct scatterlist sg;

	sg_init_one(&sg, buf, size);

	/* There should always be room for one buffer. */
	if (virtqueue_add_buf(vq, &sg, 0, 1, buf) < 0)
		BUG();

	virtqueue_kick(vq);
}
コード例 #9
0
static int
p9_virtio_request(struct p9_client *client, struct p9_req_t *req)
{
	int err;
	int in, out, out_sgs, in_sgs;
	unsigned long flags;
	struct virtio_chan *chan = client->trans;
	struct scatterlist *sgs[2];

	p9_debug(P9_DEBUG_TRANS, "9p debug: virtio request\n");

	req->status = REQ_STATUS_SENT;
req_retry:
	spin_lock_irqsave(&chan->lock, flags);

	out_sgs = in_sgs = 0;
	/* Handle out VirtIO ring buffers */
	out = pack_sg_list(chan->sg, 0,
			   VIRTQUEUE_NUM, req->tc->sdata, req->tc->size);
	if (out)
		sgs[out_sgs++] = chan->sg;

	in = pack_sg_list(chan->sg, out,
			  VIRTQUEUE_NUM, req->rc->sdata, req->rc->capacity);
	if (in)
		sgs[out_sgs + in_sgs++] = chan->sg + out;

	err = virtqueue_add_sgs(chan->vq, sgs, out_sgs, in_sgs, req->tc,
				GFP_ATOMIC);
	if (err < 0) {
		if (err == -ENOSPC) {
			chan->ring_bufs_avail = 0;
			spin_unlock_irqrestore(&chan->lock, flags);
			err = wait_event_interruptible(*chan->vc_wq,
							chan->ring_bufs_avail);
			if (err  == -ERESTARTSYS)
				return err;

			p9_debug(P9_DEBUG_TRANS, "Retry virtio request\n");
			goto req_retry;
		} else {
			spin_unlock_irqrestore(&chan->lock, flags);
			p9_debug(P9_DEBUG_TRANS,
				 "virtio rpc add_sgs returned failure\n");
			return -EIO;
		}
	}
	virtqueue_kick(chan->vq);
	spin_unlock_irqrestore(&chan->lock, flags);

	p9_debug(P9_DEBUG_TRANS, "virtio request kicked\n");
	return 0;
}
コード例 #10
0
NTSTATUS VioCryptInterruptEnable(IN WDFINTERRUPT Interrupt, IN WDFDEVICE wdfDevice)
{
    PDEVICE_CONTEXT context = GetDeviceContext(wdfDevice);
    UNREFERENCED_PARAMETER(Interrupt);

    virtqueue_enable_cb(context->ControlQueue);
    virtqueue_kick(context->ControlQueue);

    Trace(TRACE_LEVEL_VERBOSE, "[%s]", __FUNCTION__);

    return STATUS_SUCCESS;
}
コード例 #11
0
BOOLEAN
SynchronizedFlushRoutine(
    IN PVOID DeviceExtension,
    IN PVOID Context
    )
{
    PADAPTER_EXTENSION  adaptExt = (PADAPTER_EXTENSION)DeviceExtension;
    PSCSI_REQUEST_BLOCK Srb      = (PSCSI_REQUEST_BLOCK) Context;
    PRHEL_SRB_EXTENSION srbExt   = (PRHEL_SRB_EXTENSION)Srb->SrbExtension;
    ULONG               fragLen;
    PVOID               va;
    ULONGLONG           pa;

    SET_VA_PA();

    srbExt->vbr.out_hdr.sector = 0;
    srbExt->vbr.out_hdr.ioprio = 0;
    srbExt->vbr.req            = (struct request *)Srb;
    srbExt->vbr.out_hdr.type   = VIRTIO_BLK_T_FLUSH;
    srbExt->out                = 1;
    srbExt->in                 = 1;

    srbExt->vbr.sg[0].physAddr = ScsiPortGetPhysicalAddress(DeviceExtension, NULL, &srbExt->vbr.out_hdr, &fragLen);
    srbExt->vbr.sg[0].length   = sizeof(srbExt->vbr.out_hdr);
    srbExt->vbr.sg[1].physAddr = ScsiPortGetPhysicalAddress(DeviceExtension, NULL, &srbExt->vbr.status, &fragLen);
    srbExt->vbr.sg[1].length   = sizeof(srbExt->vbr.status);

    if (virtqueue_add_buf(adaptExt->vq,
                     &srbExt->vbr.sg[0],
                     srbExt->out, srbExt->in,
                     &srbExt->vbr, va, pa) >= 0) {
           virtqueue_kick(adaptExt->vq);
        return TRUE;
    }
    virtqueue_kick(adaptExt->vq);
#ifdef USE_STORPORT
    StorPortBusy(DeviceExtension, 2);
#endif
    return FALSE;
}
コード例 #12
0
BOOLEAN
SendSRB(
    IN PVOID DeviceExtension,
    IN PSRB_TYPE Srb
    )
{
    PADAPTER_EXTENSION  adaptExt = (PADAPTER_EXTENSION)DeviceExtension;
    PSRB_EXTENSION      srbExt   = SRB_EXTENSION(Srb);
    PVOID               va = NULL;
    ULONGLONG           pa = 0;
    ULONG               QueueNumber = 0;
    ULONG               OldIrql = 0;
    ULONG               MessageId = 0;
    BOOLEAN             kick = FALSE;
    STOR_LOCK_HANDLE    LockHandle = { 0 };
    ULONG               status = STOR_STATUS_SUCCESS;
ENTER_FN();
    SET_VA_PA();

    if (adaptExt->num_queues > 1) {
        QueueNumber = adaptExt->cpu_to_vq_map[srbExt->cpu] + VIRTIO_SCSI_REQUEST_QUEUE_0;
        MessageId = QueueNumber + 1;
    }
    else {
        QueueNumber = VIRTIO_SCSI_REQUEST_QUEUE_0;
    }
    VioScsiAcquireSpinLock(DeviceExtension, MessageId, &LockHandle);
    if (virtqueue_add_buf(adaptExt->vq[QueueNumber],
                     &srbExt->sg[0],
                     srbExt->out, srbExt->in,
                     &srbExt->cmd, va, pa) >= 0){
        kick = TRUE;
    }
    else {
        RhelDbgPrint(TRACE_LEVEL_ERROR, ("%s Can not add packet to queue.\n", __FUNCTION__));
//FIXME
    }

    VioScsiReleaseSpinLock(DeviceExtension, MessageId, &LockHandle);

    if (kick == TRUE) {
        virtqueue_kick(adaptExt->vq[QueueNumber]);
    }

    if (adaptExt->num_queues > 1) {
        if (CHECKFLAG(adaptExt->perfFlags, STOR_PERF_OPTIMIZE_FOR_COMPLETION_DURING_STARTIO)) {
//            ProcessQueue(DeviceExtension, MessageId, FALSE);
        }
    }
EXIT_FN();
    return kick;
}
コード例 #13
0
ファイル: rpmsg_virtio.c プロジェクト: OpenAMP/open-amp
/**
 * rpmsg_virtio_rx_callback
 *
 * Rx callback function.
 *
 * @param vq - pointer to virtqueue on which messages is received
 *
 */
static void rpmsg_virtio_rx_callback(struct virtqueue *vq)
{
	struct virtio_device *vdev = vq->vq_dev;
	struct rpmsg_virtio_device *rvdev = vdev->priv;
	struct rpmsg_device *rdev = &rvdev->rdev;
	struct rpmsg_endpoint *ept;
	struct rpmsg_hdr *rp_hdr;
	uint32_t len;
	uint16_t idx;
	int status;

	metal_mutex_acquire(&rdev->lock);

	/* Process the received data from remote node */
	rp_hdr = rpmsg_virtio_get_rx_buffer(rvdev, &len, &idx);

	metal_mutex_release(&rdev->lock);

	while (rp_hdr) {
		/* Get the channel node from the remote device channels list. */
		metal_mutex_acquire(&rdev->lock);
		ept = rpmsg_get_ept_from_addr(rdev, rp_hdr->dst);
		metal_mutex_release(&rdev->lock);

		if (ept) {
			if (ept->dest_addr == RPMSG_ADDR_ANY) {
				/*
				 * First message received from the remote side,
				 * update channel destination address
				 */
				ept->dest_addr = rp_hdr->src;
			}
			status = ept->cb(ept, RPMSG_LOCATE_DATA(rp_hdr),
					 rp_hdr->len, rp_hdr->src, ept->priv);

			RPMSG_ASSERT(status >= 0,
				     "unexpected callback status\r\n");
		}

		metal_mutex_acquire(&rdev->lock);

		/* Return used buffers. */
		rpmsg_virtio_return_buffer(rvdev, rp_hdr, len, idx);

		rp_hdr = rpmsg_virtio_get_rx_buffer(rvdev, &len, &idx);
		if (rp_hdr == NULL) {
			/* tell peer we return some rx buffer */
			virtqueue_kick(rvdev->rvq);
		}
		metal_mutex_release(&rdev->lock);
	}
}
コード例 #14
0
size_t VIOSerialSendBuffers(IN PVIOSERIAL_PORT Port,
                            IN PVOID Buffer,
                            IN size_t Length)
{
    struct virtqueue *vq = GetOutQueue(Port);
    struct VirtIOBufferDescriptor sg[QUEUE_DESCRIPTORS];
    PVOID buffer = Buffer;
    size_t length = Length;
    int out = 0;
    int ret;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_WRITE,
                "--> %s Buffer: %p Length: %d\n", __FUNCTION__, Buffer, Length);

    if (BYTES_TO_PAGES(Length) > QUEUE_DESCRIPTORS)
    {
        return 0;
    }

    while (length > 0)
    {
        sg[out].physAddr = MmGetPhysicalAddress(buffer);
        sg[out].length = min(length, PAGE_SIZE);

        buffer = (PVOID)((LONG_PTR)buffer + sg[out].length);
        length -= sg[out].length;
        out += 1;
    }

    WdfSpinLockAcquire(Port->OutVqLock);

    ret = virtqueue_add_buf(vq, sg, out, 0, Buffer, NULL, 0);
    virtqueue_kick(vq);

    if (ret >= 0)
    {
        Port->OutVqFull = (ret == 0);
    }
    else
    {
        Length = 0;
        TraceEvents(TRACE_LEVEL_ERROR, DBG_WRITE,
                    "Error adding buffer to queue (ret = %d)\n", ret);
    }

    WdfSpinLockRelease(Port->OutVqLock);

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_WRITE, "<-- %s\n", __FUNCTION__);

    return Length;
}
コード例 #15
0
ファイル: virtio_input.c プロジェクト: Chong-Li/cse522
static void virtinput_fill_evt(struct virtio_input *vi)
{
	unsigned long flags;
	int i, size;

	spin_lock_irqsave(&vi->lock, flags);
	size = virtqueue_get_vring_size(vi->evt);
	if (size > ARRAY_SIZE(vi->evts))
		size = ARRAY_SIZE(vi->evts);
	for (i = 0; i < size; i++)
		virtinput_queue_evtbuf(vi, &vi->evts[i]);
	virtqueue_kick(vi->evt);
	spin_unlock_irqrestore(&vi->lock, flags);
}
コード例 #16
0
ファイル: virtio_balloon.c プロジェクト: Chong-Li/cse522
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
	struct scatterlist sg;
	unsigned int len;

	sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);

	/* We should always be able to add one buffer to an empty queue. */
	virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
	virtqueue_kick(vq);

	/* When host has read buffer, this completes via balloon_ack */
	wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
コード例 #17
0
ファイル: crypto-vq.c プロジェクト: dsarlis/OSLab
/*
 * Send a buffer to the output virtqueue of the given crypto_device. 
 * If nonblock is false wait until the host acknowledges the data receive.
 */
ssize_t send_buf(struct crypto_device *crdev, void *in_buf, size_t in_count,
                 bool nonblock)
{
	struct scatterlist sg[1];
	struct virtqueue *out_vq;
	ssize_t ret = 0;
	unsigned int len;
	
	debug("Entering\n");
	out_vq = crdev->ovq;
	
	/* Discard any consumed buffers. */
	reclaim_consumed_buffers(crdev);
	
	sg_init_one(sg, in_buf, in_count);
	
	/* add sg list to virtqueue and notify host */
	ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf);
	
	if (ret < 0) {
		debug("Oops! Error adding buffer to vqueue\n");
		in_count = 0;
		goto done;
	}
	
	if (ret == 0) {
		printk(KERN_WARNING "ovq_full!!!!\n");
		crdev->ovq_full = true;
	}

	virtqueue_kick(out_vq); 
	
	if (nonblock)
		goto done;
	
	/*
	 * if nonblock is false we wait until the host acknowledges it pushed 
	 * out the data we sent.
	 */
	while (!virtqueue_get_buf(out_vq, &len))
		cpu_relax();
	debug("Leaving\n");

done:
	/*
	 * We're expected to return the amount of data we wrote -- all
	 * of it
	 */
	return in_count;
}
コード例 #18
0
static void stats_handle_request(struct virtio_balloon *vb)
{
	struct virtqueue *vq;
	struct scatterlist sg;
	unsigned int len, num_stats;

	num_stats = update_balloon_stats(vb);

	vq = vb->stats_vq;
	if (!virtqueue_get_buf(vq, &len))
		return;
	sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
	virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
	virtqueue_kick(vq);
}
コード例 #19
0
static int send_cmd_id_stop(struct virtio_balloon *vb)
{
	struct scatterlist sg;
	struct virtqueue *vq = vb->free_page_vq;
	int err, unused;

	/* Detach all the used buffers from the vq */
	while (virtqueue_get_buf(vq, &unused))
		;

	sg_init_one(&sg, &vb->cmd_id_stop, sizeof(vb->cmd_id_stop));
	err = virtqueue_add_outbuf(vq, &sg, 1, &vb->cmd_id_stop, GFP_KERNEL);
	if (!err)
		virtqueue_kick(vq);
	return err;
}
コード例 #20
0
ファイル: crypto-vq.c プロジェクト: antonis-m/oslab
/*
 * Add a buffer to the specified virtqueue.
 * Callers should take appropriate locks.
 */
int add_inbuf(struct virtqueue *vq, struct crypto_vq_buffer *buf)
{
	struct scatterlist sg[1];
	int ret;
	
	debug("Entering\n");
	/* Let's make the scatter-gather list. */
	sg_init_one(sg, buf->buf, buf->size);
	
	/* Ok now add buf to virtqueue and notify host. */
	ret = virtqueue_add_buf(vq, sg, 0, 1, buf);
	virtqueue_kick(vq);
	debug("Leaving\n");
	
	return ret;
}
コード例 #21
0
NTSTATUS VirtRngEvtInterruptEnable(IN WDFINTERRUPT Interrupt,
                                   IN WDFDEVICE AssociatedDevice)
{
    PDEVICE_CONTEXT context = GetDeviceContext(
        WdfInterruptGetDevice(Interrupt));

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_INTERRUPT,
        "--> %!FUNC! Interrupt: %p Device: %p",
        Interrupt, AssociatedDevice);

    virtqueue_enable_cb(context->VirtQueue);
    virtqueue_kick(context->VirtQueue);

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_INTERRUPT, "<-- %!FUNC!");

    return STATUS_SUCCESS;
}
コード例 #22
0
static int get_free_page_and_send(struct virtio_balloon *vb)
{
	struct virtqueue *vq = vb->free_page_vq;
	struct page *page;
	struct scatterlist sg;
	int err, unused;
	void *p;

	/* Detach all the used buffers from the vq */
	while (virtqueue_get_buf(vq, &unused))
		;

	page = alloc_pages(VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG,
			   VIRTIO_BALLOON_FREE_PAGE_ORDER);
	/*
	 * When the allocation returns NULL, it indicates that we have got all
	 * the possible free pages, so return -EINTR to stop.
	 */
	if (!page)
		return -EINTR;

	p = page_address(page);
	sg_init_one(&sg, p, VIRTIO_BALLOON_FREE_PAGE_SIZE);
	/* There is always 1 entry reserved for the cmd id to use. */
	if (vq->num_free > 1) {
		err = virtqueue_add_inbuf(vq, &sg, 1, p, GFP_KERNEL);
		if (unlikely(err)) {
			free_pages((unsigned long)p,
				   VIRTIO_BALLOON_FREE_PAGE_ORDER);
			return err;
		}
		virtqueue_kick(vq);
		spin_lock_irq(&vb->free_page_list_lock);
		balloon_page_push(&vb->free_page_list, page);
		vb->num_free_page_blocks++;
		spin_unlock_irq(&vb->free_page_list_lock);
	} else {
		/*
		 * The vq has no available entry to add this page block, so
		 * just free it.
		 */
		free_pages((unsigned long)p, VIRTIO_BALLOON_FREE_PAGE_ORDER);
	}

	return 0;
}
コード例 #23
0
VOID
VIOSerialSendCtrlMsg(
    IN WDFDEVICE Device,
    IN ULONG id,
    IN USHORT event,
    IN USHORT value
)
{
    struct VirtIOBufferDescriptor sg;
    struct virtqueue *vq;
    UINT len;
    PPORTS_DEVICE pContext = GetPortsDevice(Device);
    VIRTIO_CONSOLE_CONTROL cpkt;

    if (!pContext->isHostMultiport)
    {
        return;
    }

    vq = pContext->c_ovq;

    TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "--> %s vq = %p\n", __FUNCTION__, vq);

    cpkt.id = id;
    cpkt.event = event;
    cpkt.value = value;

    sg.physAddr = MmGetPhysicalAddress(&cpkt);
    sg.length = sizeof(cpkt);

    WdfWaitLockAcquire(pContext->COutVqLock, NULL);
    if(0 <= virtqueue_add_buf(vq, &sg, 1, 0, &cpkt, NULL, 0))
    {
        virtqueue_kick(vq);
        while(!virtqueue_get_buf(vq, &len))
        {
            LARGE_INTEGER interval;
            interval.QuadPart = -1;
            KeDelayExecutionThread(KernelMode, FALSE, &interval);
        }
    }
    WdfWaitLockRelease(pContext->COutVqLock);

    TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "<-- %s\n", __FUNCTION__);
}
コード例 #24
0
ファイル: virtio_input.c プロジェクト: Chong-Li/cse522
static void virtinput_recv_events(struct virtqueue *vq)
{
	struct virtio_input *vi = vq->vdev->priv;
	struct virtio_input_event *event;
	unsigned long flags;
	unsigned int len;

	spin_lock_irqsave(&vi->lock, flags);
	if (vi->ready) {
		while ((event = virtqueue_get_buf(vi->evt, &len)) != NULL) {
			spin_unlock_irqrestore(&vi->lock, flags);
			input_event(vi->idev,
				    le16_to_cpu(event->type),
				    le16_to_cpu(event->code),
				    le32_to_cpu(event->value));
			spin_lock_irqsave(&vi->lock, flags);
			virtinput_queue_evtbuf(vi, event);
		}
		virtqueue_kick(vq);
	}
	spin_unlock_irqrestore(&vi->lock, flags);
}
コード例 #25
0
BOOLEAN
SynchronizedKickEventRoutine(
    IN PVOID DeviceExtension,
    IN PVOID Context
    )
{
    PADAPTER_EXTENSION  adaptExt = (PADAPTER_EXTENSION)DeviceExtension;
    PVirtIOSCSIEventNode eventNode   = (PVirtIOSCSIEventNode) Context;
    PVOID               va = NULL;
    ULONGLONG           pa = 0;

ENTER_FN();
    if (virtqueue_add_buf(adaptExt->vq[VIRTIO_SCSI_EVENTS_QUEUE],
                     &eventNode->sg,
                     0, 1,
                     eventNode, va, pa) >= 0){
        virtqueue_kick(adaptExt->vq[VIRTIO_SCSI_EVENTS_QUEUE]);
        return TRUE;
    }
EXIT_ERR();
    return FALSE;
}
コード例 #26
0
ファイル: virtio_balloon.c プロジェクト: dj-tech/linux
static int init_vqs(struct virtio_balloon *vb)
{
	struct virtqueue *vqs[3];
	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
	static const char * const names[] = { "inflate", "deflate", "stats" };
	int err, nvqs;

	/*
	 * We expect two virtqueues: inflate and deflate, and
	 * optionally stat.
	 */
	nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
	err = virtio_find_vqs(vb->vdev, nvqs, vqs, callbacks, names, NULL);
	if (err)
		return err;

	vb->inflate_vq = vqs[0];
	vb->deflate_vq = vqs[1];
	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
		struct scatterlist sg;
		unsigned int num_stats;
		vb->stats_vq = vqs[2];

		/*
		 * Prime this virtqueue with one buffer so the hypervisor can
		 * use it to signal us later (it can't be broken yet!).
		 */
		num_stats = update_balloon_stats(vb);

		sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
		if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
		    < 0)
			BUG();
		virtqueue_kick(vb->stats_vq);
	}
	return 0;
}
コード例 #27
0
ファイル: remote_device.c プロジェクト: BadrElh/open-amp
/*
 * rpmsg_rdev_notify
 *
 * This function checks whether remote device is up or not. If it is up then
 * notification is sent based on device role to start IPC.
 *
 * @param rdev - pointer to remote device
 *
 * @return - status of function execution
 *
 */
int rpmsg_rdev_notify(struct remote_device *rdev)
{
	int status = RPMSG_SUCCESS;

	if (rdev->role == RPMSG_REMOTE) {
		status = hil_get_status(rdev->proc);

		/*
		 * Let the remote device know that Master is ready for
		 * communication.
		 */
		if (!status)
			virtqueue_kick(rdev->rvq);

	} else {
		status = hil_set_status(rdev->proc);
	}

	if (status == RPMSG_SUCCESS) {
		rdev->state = RPMSG_DEV_STATE_ACTIVE;
	}

	return status;
}
コード例 #28
0
ファイル: crypto-vq.c プロジェクト: antonis-m/oslab
/*
 * Send a control message to the Guest. 
 */
ssize_t send_control_msg(struct crypto_device *crdev, unsigned int event,
                         unsigned int value)
{
	struct scatterlist sg[1];
	struct virtio_crypto_control cpkt;
	struct virtqueue *vq;
	unsigned int len;
	
	debug("Entering\n");
	cpkt.event = event;
	cpkt.value = value;
	
	vq = crdev->c_ovq;
	
	sg_init_one(sg, &cpkt, sizeof(cpkt));
	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
		virtqueue_kick(vq);
		/* Wait until host gets the message. */
		while (!virtqueue_get_buf(vq, &len))
			cpu_relax();
	}
	debug("Leaving\n");
	return 0;
}
コード例 #29
0
ファイル: virtio_blk.c プロジェクト: 0-T-0/ps4-linux
static int virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
			   const struct blk_mq_queue_data *bd)
{
	struct virtio_blk *vblk = hctx->queue->queuedata;
	struct request *req = bd->rq;
	struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
	unsigned long flags;
	unsigned int num;
	int qid = hctx->queue_num;
	int err;
	bool notify = false;

	BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems);

	vbr->req = req;
	if (req->cmd_flags & REQ_FLUSH) {
		vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_FLUSH);
		vbr->out_hdr.sector = 0;
		vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req));
	} else {
		switch (req->cmd_type) {
		case REQ_TYPE_FS:
			vbr->out_hdr.type = 0;
			vbr->out_hdr.sector = cpu_to_virtio64(vblk->vdev, blk_rq_pos(vbr->req));
			vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req));
			break;
		case REQ_TYPE_BLOCK_PC:
			vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_SCSI_CMD);
			vbr->out_hdr.sector = 0;
			vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req));
			break;
		case REQ_TYPE_DRV_PRIV:
			vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID);
			vbr->out_hdr.sector = 0;
			vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req));
			break;
		default:
			/* We don't put anything else in the queue. */
			BUG();
		}
	}

	blk_mq_start_request(req);

	num = blk_rq_map_sg(hctx->queue, vbr->req, vbr->sg);
	if (num) {
		if (rq_data_dir(vbr->req) == WRITE)
			vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT);
		else
			vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_IN);
	}

	spin_lock_irqsave(&vblk->vqs[qid].lock, flags);
	err = __virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg, num);
	if (err) {
		virtqueue_kick(vblk->vqs[qid].vq);
		blk_mq_stop_hw_queue(hctx);
		spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
		/* Out of mem doesn't actually happen, since we fall back
		 * to direct descriptors */
		if (err == -ENOMEM || err == -ENOSPC)
			return BLK_MQ_RQ_QUEUE_BUSY;
		return BLK_MQ_RQ_QUEUE_ERROR;
	}

	if (bd->last && virtqueue_kick_prepare(vblk->vqs[qid].vq))
		notify = true;
	spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);

	if (notify)
		virtqueue_notify(vblk->vqs[qid].vq);
	return BLK_MQ_RQ_QUEUE_OK;
}
コード例 #30
0
ファイル: rpmsg_virtio.c プロジェクト: OpenAMP/open-amp
/**
 * This function sends rpmsg "message" to remote device.
 *
 * @param rdev    - pointer to rpmsg device
 * @param src     - source address of channel
 * @param dst     - destination address of channel
 * @param data    - data to transmit
 * @param size    - size of data
 * @param wait    - boolean, wait or not for buffer to become
 *                  available
 *
 * @return - size of data sent or negative value for failure.
 *
 */
static int rpmsg_virtio_send_offchannel_raw(struct rpmsg_device *rdev,
					    uint32_t src, uint32_t dst,
					    const void *data,
					    int size, int wait)
{
	struct rpmsg_virtio_device *rvdev;
	struct rpmsg_hdr rp_hdr;
	void *buffer = NULL;
	uint16_t idx;
	int tick_count;
	uint32_t buff_len;
	int status;
	struct metal_io_region *io;

	/* Get the associated remote device for channel. */
	rvdev = metal_container_of(rdev, struct rpmsg_virtio_device, rdev);

	status = rpmsg_virtio_get_status(rvdev);
	/* Validate device state */
	if (!(status & VIRTIO_CONFIG_STATUS_DRIVER_OK)) {
		return RPMSG_ERR_DEV_STATE;
	}

	if (wait)
		tick_count = RPMSG_TICK_COUNT / RPMSG_TICKS_PER_INTERVAL;
	else
		tick_count = 0;

	while (1) {
		int avail_size;

		/* Lock the device to enable exclusive access to virtqueues */
		metal_mutex_acquire(&rdev->lock);
		avail_size = _rpmsg_virtio_get_buffer_size(rvdev);
		if (size <= avail_size)
			buffer = rpmsg_virtio_get_tx_buffer(rvdev, &buff_len,
							    &idx);
		metal_mutex_release(&rdev->lock);
		if (buffer || !tick_count)
			break;
		if (avail_size != 0)
			return RPMSG_ERR_BUFF_SIZE;
		metal_sleep_usec(RPMSG_TICKS_PER_INTERVAL);
		tick_count--;
	}
	if (!buffer)
		return RPMSG_ERR_NO_BUFF;

	/* Initialize RPMSG header. */
	rp_hdr.dst = dst;
	rp_hdr.src = src;
	rp_hdr.len = size;
	rp_hdr.reserved = 0;

	/* Copy data to rpmsg buffer. */
	io = rvdev->shbuf_io;
	status = metal_io_block_write(io, metal_io_virt_to_offset(io, buffer),
				      &rp_hdr, sizeof(rp_hdr));
	RPMSG_ASSERT(status == sizeof(rp_hdr), "failed to write header\r\n");

	status = metal_io_block_write(io,
				      metal_io_virt_to_offset(io,
				      RPMSG_LOCATE_DATA(buffer)),
				      data, size);
	RPMSG_ASSERT(status == size, "failed to write buffer\r\n");
	metal_mutex_acquire(&rdev->lock);

	/* Enqueue buffer on virtqueue. */
	status = rpmsg_virtio_enqueue_buffer(rvdev, buffer, buff_len, idx);
	RPMSG_ASSERT(status == VQUEUE_SUCCESS, "failed to enqueue buffer\r\n");
	/* Let the other side know that there is a job to process. */
	virtqueue_kick(rvdev->svq);

	metal_mutex_release(&rdev->lock);

	return size;
}