static int __devinit
wcnss_wlan_probe(struct platform_device *pdev)
{
int ret = 0;
/* verify we haven't been called more than once */
if (penv) {
dev_err(&pdev->dev, "cannot handle multiple devices.\n");
return -ENODEV;
}
/* create an environment to track the device */
penv = kzalloc(sizeof(*penv), GFP_KERNEL);
if (!penv) {
dev_err(&pdev->dev, "cannot allocate device memory.\n");
return -ENOMEM;
}
penv->pdev = pdev;
/* register sysfs entries */
ret = wcnss_create_sysfs(&pdev->dev);
if (ret)
return -ENOENT;
#ifdef MODULE
/*
* Since we were built as a module, we are running because
* the module was loaded, therefore we assume userspace
* applications are available to service PIL, so we can
* trigger the WCNSS configuration now
*/
pr_info(DEVICE " probed in MODULE mode\n");
return wcnss_trigger_config(pdev);
#else
/*
* Since we were built into the kernel we'll be called as part
* of kernel initialization. We don't know if userspace
* applications are available to service PIL at this time
* (they probably are not), so we simply create a device node
* here. When userspace is available it should touch the
* device so that we know that WCNSS configuration can take
* place
*/
pr_info(DEVICE " probed in built-in mode\n");
return misc_register(&wcnss_misc);
#endif
}
static int __devinit
wcnss_wlan_probe(struct platform_device *pdev)
{
int ret = 0;
/* verify we haven't been called more than once */
if (penv) {
dev_err(&pdev->dev, "cannot handle multiple devices.\n");
return -ENODEV;
}
/* create an environment to track the device */
penv = kzalloc(sizeof(*penv), GFP_KERNEL);
if (!penv) {
dev_err(&pdev->dev, "cannot allocate device memory.\n");
return -ENOMEM;
}
penv->pdev = pdev;
/* register sysfs entries */
ret = wcnss_create_sysfs(&pdev->dev);
if (ret)
return -ENOENT;
mutex_init(&penv->dev_lock);
mutex_init(&penv->ctrl_lock);
init_waitqueue_head(&penv->read_wait);
/*
* Since we were built into the kernel we'll be called as part
* of kernel initialization. We don't know if userspace
* applications are available to service PIL at this time
* (they probably are not), so we simply create a device node
* here. When userspace is available it should touch the
* device so that we know that WCNSS configuration can take
* place
*/
pr_info(DEVICE " probed in built-in mode\n");
misc_register(&wcnss_usr_ctrl);
return misc_register(&wcnss_misc);
}
static int
wcnss_trigger_config(struct platform_device *pdev)
{
int ret;
struct qcom_wcnss_opts *pdata;
/* make sure we are only triggered once */
if (penv->triggered)
return 0;
penv->triggered = 1;
/* initialize the WCNSS device configuration */
pdata = pdev->dev.platform_data;
if (WCNSS_CONFIG_UNSPECIFIED == has_48mhz_xo)
has_48mhz_xo = pdata->has_48mhz_xo;
penv->wlan_config.use_48mhz_xo = has_48mhz_xo;
penv->thermal_mitigation = 0;
penv->gpios_5wire = platform_get_resource_byname(pdev, IORESOURCE_IO,
"wcnss_gpios_5wire");
/* allocate 5-wire GPIO resources */
if (!penv->gpios_5wire) {
dev_err(&pdev->dev, "insufficient IO resources\n");
ret = -ENOENT;
goto fail_gpio_res;
}
/* Configure 5 wire GPIOs */
ret = wcnss_gpios_config(penv->gpios_5wire, true);
if (ret) {
dev_err(&pdev->dev, "WCNSS gpios config failed.\n");
goto fail_gpio_res;
}
/* power up the WCNSS */
ret = wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_ON);
if (ret) {
dev_err(&pdev->dev, "WCNSS Power-up failed.\n");
goto fail_power;
}
/* trigger initialization of the WCNSS */
penv->pil = pil_get(WCNSS_PIL_DEVICE);
if (IS_ERR(penv->pil)) {
dev_err(&pdev->dev, "Peripheral Loader failed on WCNSS.\n");
ret = PTR_ERR(penv->pil);
penv->pil = NULL;
goto fail_pil;
}
/* allocate resources */
penv->mmio_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"wcnss_mmio");
penv->tx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlantx_irq");
penv->rx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlanrx_irq");
if (!(penv->mmio_res && penv->tx_irq_res && penv->rx_irq_res)) {
dev_err(&pdev->dev, "insufficient resources\n");
ret = -ENOENT;
goto fail_res;
}
/* register sysfs entries */
ret = wcnss_create_sysfs(&pdev->dev);
if (ret)
goto fail_sysfs;
return 0;
fail_sysfs:
fail_res:
if (penv->pil)
pil_put(penv->pil);
fail_pil:
wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_OFF);
fail_power:
wcnss_gpios_config(penv->gpios_5wire, false);
fail_gpio_res:
kfree(penv);
penv = NULL;
return ret;
}
static int
wcnss_trigger_config(struct platform_device *pdev)
{
int ret;
struct qcom_wcnss_opts *pdata;
if (penv->triggered)
return 0;
penv->triggered = 1;
pdata = pdev->dev.platform_data;
if (WCNSS_CONFIG_UNSPECIFIED == has_48mhz_xo)
has_48mhz_xo = pdata->has_48mhz_xo;
penv->wlan_config.use_48mhz_xo = has_48mhz_xo;
penv->thermal_mitigation = 0;
penv->gpios_5wire = platform_get_resource_byname(pdev, IORESOURCE_IO,
"wcnss_gpios_5wire");
if (!penv->gpios_5wire) {
dev_err(&pdev->dev, "insufficient IO resources\n");
ret = -ENOENT;
goto fail_gpio_res;
}
ret = wcnss_gpios_config(penv->gpios_5wire, true);
if (ret) {
dev_err(&pdev->dev, "WCNSS gpios config failed.\n");
goto fail_gpio_res;
}
ret = wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_ON);
if (ret) {
dev_err(&pdev->dev, "WCNSS Power-up failed.\n");
goto fail_power;
}
penv->pil = pil_get(WCNSS_PIL_DEVICE);
if (IS_ERR(penv->pil)) {
dev_err(&pdev->dev, "Peripheral Loader failed on WCNSS.\n");
ret = PTR_ERR(penv->pil);
penv->pil = NULL;
goto fail_pil;
}
penv->mmio_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"wcnss_mmio");
penv->tx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlantx_irq");
penv->rx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlanrx_irq");
if (!(penv->mmio_res && penv->tx_irq_res && penv->rx_irq_res)) {
dev_err(&pdev->dev, "insufficient resources\n");
ret = -ENOENT;
goto fail_res;
}
ret = wcnss_create_sysfs(&pdev->dev);
if (ret)
goto fail_sysfs;
wake_lock_init(&penv->wcnss_wake_lock, WAKE_LOCK_SUSPEND, "wcnss");
penv->msm_wcnss_base = ioremap(MSM_RIVA_PHYS, SZ_256);
if (!penv->msm_wcnss_base) {
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_wake;
}
return 0;
fail_wake:
wake_lock_destroy(&penv->wcnss_wake_lock);
fail_sysfs:
fail_res:
if (penv->pil)
pil_put(penv->pil);
fail_pil:
wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_OFF);
fail_power:
wcnss_gpios_config(penv->gpios_5wire, false);
fail_gpio_res:
kfree(penv);
penv = NULL;
return ret;
}
