/*
* WiMAX stack operation: relay a message from user space
*
* @wimax_dev: device descriptor
* @pipe_name: named pipe the message is for
* @msg_buf: pointer to the message bytes
* @msg_len: length of the buffer
* @genl_info: passed by the generic netlink layer
*
* The WiMAX stack will call this function when a message was received
* from user space.
*
* For the i2400m, this is an L3L4 message, as specified in
* include/linux/wimax/i2400m.h, and thus prefixed with a 'struct
* i2400m_l3l4_hdr'. Driver (and device) expect the messages to be
* coded in Little Endian.
*
* This function just verifies that the header declaration and the
* payload are consistent and then deals with it, either forwarding it
* to the device or procesing it locally.
*
* In the i2400m, messages are basically commands that will carry an
* ack, so we use i2400m_msg_to_dev() and then deliver the ack back to
* user space. The rx.c code might intercept the response and use it
* to update the driver's state, but then it will pass it on so it can
* be relayed back to user space.
*
* Note that asynchronous events from the device are processed and
* sent to user space in rx.c.
*/
static
int i2400m_op_msg_from_user(struct wimax_dev *wimax_dev,
const char *pipe_name,
const void *msg_buf, size_t msg_len,
const struct genl_info *genl_info)
{
int result;
struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev);
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
d_fnstart(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p "
"msg_len %zu genl_info %p)\n", wimax_dev, i2400m,
msg_buf, msg_len, genl_info);
ack_skb = i2400m_msg_to_dev(i2400m, msg_buf, msg_len);
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb))
goto error_msg_to_dev;
result = wimax_msg_send(&i2400m->wimax_dev, ack_skb);
error_msg_to_dev:
d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu "
"genl_info %p) = %d\n", wimax_dev, i2400m, msg_buf, msg_len,
genl_info, result);
return result;
}
/*
* WiMAX stack operation: implement SW RFKill toggling
*
* @wimax_dev: device descriptor
* @skb: skb where the message has been received; skb->data is
* expected to point to the message payload.
* @genl_info: passed by the generic netlink layer
*
* Generic Netlink will call this function when a message is sent from
* userspace to change the software RF-Kill switch status.
*
<<<<<<< HEAD
* This function will set the device's software RF-Kill switch state to
=======
* This function will set the device's sofware RF-Kill switch state to
>>>>>>> 296c66da8a02d52243f45b80521febece5ed498a
* match what is requested.
*
* NOTE: the i2400m has a strict state machine; we can only set the
* RF-Kill switch when it is on, the HW RF-Kill is on and the
* device is initialized. So we ignore errors steaming from not
* being in the right state (-EILSEQ).
*/
int i2400m_op_rfkill_sw_toggle(struct wimax_dev *wimax_dev,
enum wimax_rf_state state)
{
int result;
struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev);
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct {
struct i2400m_l3l4_hdr hdr;
struct i2400m_tlv_rf_operation sw_rf;
<<<<<<< HEAD
} __packed *cmd;
int i2400m_op_rfkill_sw_toggle(struct wimax_dev *wimax_dev,
enum wimax_rf_state state)
{
int result;
struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev);
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct {
struct i2400m_l3l4_hdr hdr;
struct i2400m_tlv_rf_operation sw_rf;
} __attribute__((packed)) *cmd;
char strerr[32];
d_fnstart(4, dev, "(wimax_dev %p state %d)\n", wimax_dev, state);
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->hdr.type = cpu_to_le16(I2400M_MT_CMD_RF_CONTROL);
cmd->hdr.length = sizeof(cmd->sw_rf);
cmd->hdr.version = cpu_to_le16(I2400M_L3L4_VERSION);
cmd->sw_rf.hdr.type = cpu_to_le16(I2400M_TLV_RF_OPERATION);
cmd->sw_rf.hdr.length = cpu_to_le16(sizeof(cmd->sw_rf.status));
switch (state) {
case WIMAX_RF_OFF:
cmd->sw_rf.status = cpu_to_le32(2);
break;
case WIMAX_RF_ON:
cmd->sw_rf.status = cpu_to_le32(1);
break;
default:
BUG();
}
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'RF Control' command: %d\n",
result);
goto error_msg_to_dev;
}
result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
strerr, sizeof(strerr));
if (result < 0) {
dev_err(dev, "'RF Control' (0x%04x) command failed: %d - %s\n",
I2400M_MT_CMD_RF_CONTROL, result, strerr);
goto error_cmd;
}
result = wait_event_timeout(
i2400m->state_wq, i2400m_radio_is(i2400m, state),
5 * HZ);
if (result == 0)
result = -ETIMEDOUT;
if (result < 0)
dev_err(dev, "Error waiting for device to toggle RF state: "
"%d\n", result);
result = 0;
error_cmd:
kfree_skb(ack_skb);
error_msg_to_dev:
error_alloc:
d_fnend(4, dev, "(wimax_dev %p state %d) = %d\n",
wimax_dev, state, result);
return result;
}