/**
* @brief initialize AP or GO bss config
*
* @param priv A pointer to moal private structure
* @param params A pointer to beacon_parameters structure
* @return 0 -- success, otherwise fail
*/
static int
woal_cfg80211_beacon_config(moal_private * priv,
struct beacon_parameters *params)
#endif
{
int ret = 0;
mlan_uap_bss_param sys_config;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0) || defined(COMPAT_WIRELESS)
int i = 0;
#else
const t_u8 *ssid_ie = NULL;
struct ieee80211_mgmt *head = NULL;
t_u16 capab_info = 0;
#endif
t_u8 Rates_BG[13] =
{ 0x82, 0x84, 0x8b, 0x96, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48,
0x60, 0x6c, 0
};
t_u8 Rates_A[9] = { 0x8c, 0x12, 0x98, 0x24, 0xb0, 0x48, 0x60, 0x6c, 0 };
t_u8 chan2Offset = 0;
#ifdef WIFI_DIRECT_SUPPORT
t_u8 Rates_WFD[9] = { 0x8c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, 0 };
#endif
ENTER();
if (params == NULL) {
ret = -EFAULT;
goto done;
}
if (priv->bss_type != MLAN_BSS_TYPE_UAP
#ifdef WIFI_DIRECT_SUPPORT
&& priv->bss_type != MLAN_BSS_TYPE_WIFIDIRECT
#endif
) {
ret = -EFAULT;
goto done;
}
/* Initialize the uap bss values which are uploaded from firmware */
if (MLAN_STATUS_SUCCESS != woal_set_get_sys_config(priv,
MLAN_ACT_GET,
MOAL_IOCTL_WAIT,
&sys_config)) {
PRINTM(MERROR, "Error getting AP confiruration\n");
ret = -EFAULT;
goto done;
}
/* Setting the default values */
sys_config.channel = 6;
sys_config.preamble_type = 0;
if (priv->bss_type == MLAN_BSS_TYPE_UAP) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,4,0)
if (params->beacon_interval)
sys_config.beacon_period = params->beacon_interval;
#else
if (params->interval)
sys_config.beacon_period = params->interval;
#endif
if (params->dtim_period)
sys_config.dtim_period = params->dtim_period;
}
if (priv->channel) {
memset(sys_config.rates, 0, sizeof(sys_config.rates));
sys_config.channel = priv->channel;
if (priv->channel <= MAX_BG_CHANNEL) {
sys_config.band_cfg = BAND_CONFIG_2G;
#ifdef WIFI_DIRECT_SUPPORT
if (priv->bss_type == MLAN_BSS_TYPE_WIFIDIRECT)
memcpy(sys_config.rates, Rates_WFD, sizeof(Rates_WFD));
else
#endif
memcpy(sys_config.rates, Rates_BG, sizeof(Rates_BG));
} else {
sys_config.band_cfg = BAND_CONFIG_5G;
chan2Offset = woal_get_second_channel_offset(priv->channel);
if (chan2Offset) {
sys_config.band_cfg |= chan2Offset;
sys_config.ht_cap_info = 0x117e;
sys_config.ampdu_param = 3;
}
#ifdef WIFI_DIRECT_SUPPORT
if (priv->bss_type == MLAN_BSS_TYPE_WIFIDIRECT)
memcpy(sys_config.rates, Rates_WFD, sizeof(Rates_WFD));
else
#endif
memcpy(sys_config.rates, Rates_A, sizeof(Rates_A));
}
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0) || defined(COMPAT_WIRELESS)
if (!params->ssid || !params->ssid_len) {
ret = -EINVAL;
goto done;
}
memcpy(sys_config.ssid.ssid, params->ssid,
MIN(MLAN_MAX_SSID_LENGTH, params->ssid_len));
sys_config.ssid.ssid_len = MIN(MLAN_MAX_SSID_LENGTH, params->ssid_len);
if (params->hidden_ssid)
sys_config.bcast_ssid_ctl = 0;
else
sys_config.bcast_ssid_ctl = 1;
if (params->auth_type == NL80211_AUTHTYPE_SHARED_KEY)
sys_config.auth_mode = MLAN_AUTH_MODE_SHARED;
else
sys_config.auth_mode = MLAN_AUTH_MODE_OPEN;
for (i = 0; i < params->crypto.n_akm_suites; i++) {
switch (params->crypto.akm_suites[i]) {
case WLAN_AKM_SUITE_8021X:
sys_config.key_mgmt = KEY_MGMT_EAP;
if ((params->crypto.wpa_versions & NL80211_WPA_VERSION_1) &&
(params->crypto.wpa_versions & NL80211_WPA_VERSION_2))
sys_config.protocol = PROTOCOL_WPA | PROTOCOL_WPA2;
else if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.protocol = PROTOCOL_WPA2;
else if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.protocol = PROTOCOL_WPA;
break;
case WLAN_AKM_SUITE_PSK:
sys_config.key_mgmt = KEY_MGMT_PSK;
if ((params->crypto.wpa_versions & NL80211_WPA_VERSION_1) &&
(params->crypto.wpa_versions & NL80211_WPA_VERSION_2))
sys_config.protocol = PROTOCOL_WPA | PROTOCOL_WPA2;
else if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.protocol = PROTOCOL_WPA2;
else if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.protocol = PROTOCOL_WPA;
break;
}
}
sys_config.wpa_cfg.pairwise_cipher_wpa = 0;
sys_config.wpa_cfg.pairwise_cipher_wpa2 = 0;
for (i = 0; i < params->crypto.n_ciphers_pairwise; i++) {
switch (params->crypto.ciphers_pairwise[i]) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
break;
case WLAN_CIPHER_SUITE_TKIP:
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.wpa_cfg.pairwise_cipher_wpa |= CIPHER_TKIP;
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.wpa_cfg.pairwise_cipher_wpa2 |= CIPHER_TKIP;
break;
case WLAN_CIPHER_SUITE_CCMP:
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.wpa_cfg.pairwise_cipher_wpa |= CIPHER_AES_CCMP;
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.wpa_cfg.pairwise_cipher_wpa2 |= CIPHER_AES_CCMP;
break;
}
}
switch (params->crypto.cipher_group) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
if ((priv->cipher == WLAN_CIPHER_SUITE_WEP40) ||
(priv->cipher == WLAN_CIPHER_SUITE_WEP104)) {
sys_config.protocol = PROTOCOL_STATIC_WEP;
sys_config.key_mgmt = KEY_MGMT_NONE;
sys_config.wpa_cfg.length = 0;
sys_config.wep_cfg.key0.key_index = priv->key_index;
sys_config.wep_cfg.key0.is_default = 1;
sys_config.wep_cfg.key0.length = priv->key_len;
memcpy(sys_config.wep_cfg.key0.key, priv->key_material,
priv->key_len);
}
break;
case WLAN_CIPHER_SUITE_TKIP:
sys_config.wpa_cfg.group_cipher = CIPHER_TKIP;
break;
case WLAN_CIPHER_SUITE_CCMP:
sys_config.wpa_cfg.group_cipher = CIPHER_AES_CCMP;
break;
}
#else
/* Since in Android ICS 4.0.1's wpa_supplicant, there is no way to set ssid
when GO (AP) starts up, so get it from beacon head parameter TODO: right
now use hard code 24 -- ieee80211 header lenth, 12 -- fixed element
length for beacon */
#define BEACON_IE_OFFSET 36
/* Find SSID in head SSID IE id: 0, right now use hard code */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,4,0)
ssid_ie = woal_parse_ie_tlv(params->beacon.head + BEACON_IE_OFFSET,
params->beacon.head_len - BEACON_IE_OFFSET, 0);
#else
ssid_ie = woal_parse_ie_tlv(params->head + BEACON_IE_OFFSET,
params->head_len - BEACON_IE_OFFSET, 0);
#endif
if (!ssid_ie) {
PRINTM(MERROR, "No ssid IE found.\n");
ret = -EFAULT;
goto done;
}
if (*(ssid_ie + 1) > 32) {
PRINTM(MERROR, "ssid len error: %d\n", *(ssid_ie + 1));
ret = -EFAULT;
goto done;
}
memcpy(sys_config.ssid.ssid, ssid_ie + 2, *(ssid_ie + 1));
sys_config.ssid.ssid_len = *(ssid_ie + 1);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,4,0)
head = (struct ieee80211_mgmt *) params->beacon.head;
#else
head = (struct ieee80211_mgmt *) params->head;
#endif
capab_info = le16_to_cpu(head->u.beacon.capab_info);
PRINTM(MIOCTL, "capab_info=0x%x\n", head->u.beacon.capab_info);
sys_config.auth_mode = MLAN_AUTH_MODE_OPEN;
/** For ICS, we don't support OPEN mode */
if ((priv->cipher == WLAN_CIPHER_SUITE_WEP40) ||
(priv->cipher == WLAN_CIPHER_SUITE_WEP104)) {
sys_config.protocol = PROTOCOL_STATIC_WEP;
sys_config.key_mgmt = KEY_MGMT_NONE;
sys_config.wpa_cfg.length = 0;
sys_config.wep_cfg.key0.key_index = priv->key_index;
sys_config.wep_cfg.key0.is_default = 1;
sys_config.wep_cfg.key0.length = priv->key_len;
memcpy(sys_config.wep_cfg.key0.key, priv->key_material, priv->key_len);
} else {
/** Get cipher and key_mgmt from RSN/WPA IE */
if (capab_info & WLAN_CAPABILITY_PRIVACY) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,4,0)
if (MFALSE ==
woal_find_wpa_ies(params->beacon.tail, params->beacon.tail_len,
&sys_config))
#else
if (MFALSE ==
woal_find_wpa_ies(params->tail, params->tail_len, &sys_config))
#endif
{
/* hard code setting to wpa2-psk */
sys_config.protocol = PROTOCOL_WPA2;
sys_config.key_mgmt = KEY_MGMT_PSK;
sys_config.wpa_cfg.pairwise_cipher_wpa2 = CIPHER_AES_CCMP;
sys_config.wpa_cfg.group_cipher = CIPHER_AES_CCMP;
}
}
}
#endif /* COMPAT_WIRELESS */
/* If the security mode is configured as WEP or WPA-PSK, it will disable
11n automatically, and if configured as open(off) or wpa2-psk, it will
automatically enable 11n */
if ((sys_config.protocol == PROTOCOL_STATIC_WEP) ||
(sys_config.protocol == PROTOCOL_WPA))
woal_uap_set_11n_status(&sys_config, MLAN_ACT_DISABLE);
else
woal_uap_set_11n_status(&sys_config, MLAN_ACT_ENABLE);
if (MLAN_STATUS_SUCCESS != woal_set_get_sys_config(priv,
MLAN_ACT_SET,
MOAL_IOCTL_WAIT,
&sys_config)) {
ret = -EFAULT;
goto done;
}
done:
LEAVE();
return ret;
}
/**
* @brief initialize AP or GO bss config
*
* @param priv A pointer to moal private structure
* @param params A pointer to beacon_parameters structure
* @return 0 -- success, otherwise fail
*/
static int
woal_cfg80211_beacon_config(moal_private *priv,
struct beacon_parameters *params)
#endif
{
int ret = 0;
mlan_uap_bss_param sys_config;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 2, 0) || defined(COMPAT_WIRELESS)
int i = 0;
#else
t_u8 wpa_ies;
const t_u8 *ssid_ie = NULL;
struct ieee80211_mgmt *head = NULL;
t_u16 capab_info = 0;
#endif
t_u8 rates_bg[13] = {
0x82, 0x84, 0x8b, 0x96,
0x0c, 0x12, 0x18, 0x24,
0x30, 0x48, 0x60, 0x6c,
0x00
};
t_u8 rates_a[9] = {
0x8c, 0x12, 0x98, 0x24,
0xb0, 0x48, 0x60, 0x6c,
0x00
};
#ifdef WIFI_DIRECT_SUPPORT
t_u8 rates_wfd[9] = {
0x8c, 0x12, 0x18, 0x24,
0x30, 0x48, 0x60, 0x6c,
0x00
};
#endif
t_u8 chan2Offset = 0;
t_u8 enable_11n = MTRUE;
ENTER();
if (params == NULL) {
ret = -EFAULT;
goto done;
}
if (priv->bss_type != MLAN_BSS_TYPE_UAP
#ifdef WIFI_DIRECT_SUPPORT
&& priv->bss_type != MLAN_BSS_TYPE_WIFIDIRECT
#endif
) {
ret = -EFAULT;
goto done;
}
/* Initialize the uap bss values which are uploaded from firmware */
if (MLAN_STATUS_SUCCESS != woal_set_get_sys_config(priv,
MLAN_ACT_GET,
MOAL_IOCTL_WAIT,
&sys_config)) {
PRINTM(MERROR, "Error getting AP confiruration\n");
ret = -EFAULT;
goto done;
}
/* Setting the default values */
sys_config.channel = 6;
sys_config.preamble_type = 0;
sys_config.mgmt_ie_passthru_mask = priv->mgmt_subtype_mask;
memcpy(sys_config.mac_addr, priv->current_addr, ETH_ALEN);
if (priv->bss_type == MLAN_BSS_TYPE_UAP) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0)
if (params->beacon_interval)
sys_config.beacon_period = params->beacon_interval;
#else
if (params->interval)
sys_config.beacon_period = params->interval;
#endif
if (params->dtim_period)
sys_config.dtim_period = params->dtim_period;
}
if (priv->channel) {
memset(sys_config.rates, 0, sizeof(sys_config.rates));
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
switch (params->chandef.width) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
#endif
case NL80211_CHAN_WIDTH_20_NOHT:
enable_11n = MFALSE;
break;
case NL80211_CHAN_WIDTH_20:
break;
case NL80211_CHAN_WIDTH_40:
case NL80211_CHAN_WIDTH_80:
case NL80211_CHAN_WIDTH_80P80:
case NL80211_CHAN_WIDTH_160:
if (params->chandef.center_freq1 <
params->chandef.chan->center_freq)
chan2Offset = SECOND_CHANNEL_BELOW;
else
chan2Offset = SECOND_CHANNEL_ABOVE;
break;
default:
PRINTM(MWARN, "Unknown channel width: %d\n",
params->chandef.width);
break;
}
#else
switch (params->channel_type) {
case NL80211_CHAN_NO_HT:
enable_11n = MFALSE;
break;
case NL80211_CHAN_HT20:
break;
case NL80211_CHAN_HT40PLUS:
chan2Offset = SECOND_CHANNEL_ABOVE;
break;
case NL80211_CHAN_HT40MINUS:
chan2Offset = SECOND_CHANNEL_BELOW;
break;
default:
PRINTM(MWARN, "Unknown channel type: %d\n",
params->channel_type);
break;
}
#endif
#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0) */
sys_config.channel = priv->channel;
if (priv->channel <= MAX_BG_CHANNEL) {
sys_config.band_cfg = BAND_CONFIG_2G;
#ifdef WIFI_DIRECT_SUPPORT
if (priv->bss_type == MLAN_BSS_TYPE_WIFIDIRECT)
memcpy(sys_config.rates, rates_wfd,
sizeof(rates_wfd));
else
#endif
memcpy(sys_config.rates, rates_bg,
sizeof(rates_bg));
} else {
sys_config.band_cfg = BAND_CONFIG_5G;
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0)
chan2Offset =
woal_get_second_channel_offset(priv->channel);
#else
#ifdef WIFI_DIRECT_SUPPORT
/* Force enable 40MHZ on WFD interface */
if (priv->bss_type == MLAN_BSS_TYPE_WIFIDIRECT)
chan2Offset =
woal_get_second_channel_offset(priv->
channel);
#endif
#endif
#ifdef WIFI_DIRECT_SUPPORT
if (priv->bss_type == MLAN_BSS_TYPE_WIFIDIRECT)
memcpy(sys_config.rates, rates_wfd,
sizeof(rates_wfd));
else
#endif
memcpy(sys_config.rates, rates_a,
sizeof(rates_a));
}
/* Disable GreenField by default */
sys_config.ht_cap_info = 0x10c;
if (enable_11n)
sys_config.ht_cap_info |= 0x20;
if (chan2Offset) {
sys_config.band_cfg |= chan2Offset;
sys_config.ht_cap_info |= 0x1042;
sys_config.ampdu_param = 3;
}
PRINTM(MCMND,
"11n=%d, ht_cap=0x%x, channel=%d, band_cfg=0x%x\n",
enable_11n, sys_config.ht_cap_info, priv->channel,
sys_config.band_cfg);
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 2, 0) || defined(COMPAT_WIRELESS)
if (!params->ssid || !params->ssid_len) {
ret = -EINVAL;
goto done;
}
memcpy(sys_config.ssid.ssid, params->ssid,
MIN(MLAN_MAX_SSID_LENGTH, params->ssid_len));
sys_config.ssid.ssid_len = MIN(MLAN_MAX_SSID_LENGTH, params->ssid_len);
if (params->hidden_ssid)
sys_config.bcast_ssid_ctl = 0;
else
sys_config.bcast_ssid_ctl = 1;
if (params->auth_type == NL80211_AUTHTYPE_SHARED_KEY)
sys_config.auth_mode = MLAN_AUTH_MODE_SHARED;
else
sys_config.auth_mode = MLAN_AUTH_MODE_OPEN;
if (params->crypto.n_akm_suites) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0)
woal_find_wpa_ies(params->beacon.tail,
(int)params->beacon.tail_len, &sys_config);
#else
woal_find_wpa_ies(params->tail, params->tail_len, &sys_config);
#endif
}
for (i = 0; i < params->crypto.n_akm_suites; i++) {
switch (params->crypto.akm_suites[i]) {
case WLAN_AKM_SUITE_8021X:
sys_config.key_mgmt |= KEY_MGMT_EAP;
if ((params->crypto.
wpa_versions & NL80211_WPA_VERSION_1) &&
(params->crypto.
wpa_versions & NL80211_WPA_VERSION_2))
sys_config.protocol =
PROTOCOL_WPA | PROTOCOL_WPA2;
else if (params->crypto.
wpa_versions & NL80211_WPA_VERSION_2)
sys_config.protocol = PROTOCOL_WPA2;
else if (params->crypto.
wpa_versions & NL80211_WPA_VERSION_1)
sys_config.protocol = PROTOCOL_WPA;
break;
case WLAN_AKM_SUITE_PSK:
sys_config.key_mgmt |= KEY_MGMT_PSK;
if ((params->crypto.
wpa_versions & NL80211_WPA_VERSION_1) &&
(params->crypto.
wpa_versions & NL80211_WPA_VERSION_2))
sys_config.protocol =
PROTOCOL_WPA | PROTOCOL_WPA2;
else if (params->crypto.
wpa_versions & NL80211_WPA_VERSION_2)
sys_config.protocol = PROTOCOL_WPA2;
else if (params->crypto.
wpa_versions & NL80211_WPA_VERSION_1)
sys_config.protocol = PROTOCOL_WPA;
break;
}
}
sys_config.wpa_cfg.pairwise_cipher_wpa = 0;
sys_config.wpa_cfg.pairwise_cipher_wpa2 = 0;
for (i = 0; i < params->crypto.n_ciphers_pairwise; i++) {
switch (params->crypto.ciphers_pairwise[i]) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
break;
case WLAN_CIPHER_SUITE_TKIP:
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.wpa_cfg.pairwise_cipher_wpa |=
CIPHER_TKIP;
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.wpa_cfg.pairwise_cipher_wpa2 |=
CIPHER_TKIP;
break;
case WLAN_CIPHER_SUITE_CCMP:
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
sys_config.wpa_cfg.pairwise_cipher_wpa |=
CIPHER_AES_CCMP;
if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
sys_config.wpa_cfg.pairwise_cipher_wpa2 |=
CIPHER_AES_CCMP;
break;
}
}
switch (params->crypto.cipher_group) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
if ((priv->cipher == WLAN_CIPHER_SUITE_WEP40) ||
(priv->cipher == WLAN_CIPHER_SUITE_WEP104)) {
sys_config.protocol = PROTOCOL_STATIC_WEP;
sys_config.key_mgmt = KEY_MGMT_NONE;
sys_config.wpa_cfg.length = 0;
memcpy(&sys_config.wep_cfg.key0, &priv->uap_wep_key[0],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key1, &priv->uap_wep_key[1],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key2, &priv->uap_wep_key[2],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key3, &priv->uap_wep_key[3],
sizeof(wep_key));
}
break;
case WLAN_CIPHER_SUITE_TKIP:
sys_config.wpa_cfg.group_cipher = CIPHER_TKIP;
break;
case WLAN_CIPHER_SUITE_CCMP:
sys_config.wpa_cfg.group_cipher = CIPHER_AES_CCMP;
break;
}
#else
/* Since in Android ICS 4.0.1's wpa_supplicant, there is no way to set
ssid when GO (AP) starts up, so get it from beacon head parameter
TODO: right now use hard code 24 -- ieee80211 header lenth, 12 --
fixed element length for beacon */
#define BEACON_IE_OFFSET 36
/* Find SSID in head SSID IE id: 0, right now use hard code */
ssid_ie = woal_parse_ie_tlv(params->head + BEACON_IE_OFFSET,
params->head_len - BEACON_IE_OFFSET, 0);
if (!ssid_ie) {
PRINTM(MERROR, "No ssid IE found.\n");
ret = -EFAULT;
goto done;
}
if (*(ssid_ie + 1) > 32) {
PRINTM(MERROR, "ssid len error: %d\n", *(ssid_ie + 1));
ret = -EFAULT;
goto done;
}
memcpy(sys_config.ssid.ssid, ssid_ie + 2, *(ssid_ie + 1));
sys_config.ssid.ssid_len = *(ssid_ie + 1);
head = (struct ieee80211_mgmt *)params->head;
capab_info = le16_to_cpu(head->u.beacon.capab_info);
PRINTM(MIOCTL, "capab_info=0x%x\n", head->u.beacon.capab_info);
sys_config.auth_mode = MLAN_AUTH_MODE_OPEN;
/** For ICS, we don't support OPEN mode */
if ((priv->cipher == WLAN_CIPHER_SUITE_WEP40) ||
(priv->cipher == WLAN_CIPHER_SUITE_WEP104)) {
sys_config.protocol = PROTOCOL_STATIC_WEP;
sys_config.key_mgmt = KEY_MGMT_NONE;
sys_config.wpa_cfg.length = 0;
memcpy(&sys_config.wep_cfg.key0, &priv->uap_wep_key[0],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key1, &priv->uap_wep_key[1],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key2, &priv->uap_wep_key[2],
sizeof(wep_key));
memcpy(&sys_config.wep_cfg.key3, &priv->uap_wep_key[3],
sizeof(wep_key));
} else {
/** Get cipher and key_mgmt from RSN/WPA IE */
if (capab_info & WLAN_CAPABILITY_PRIVACY) {
wpa_ies =
woal_find_wpa_ies(params->tail,
params->tail_len,
&sys_config);
if (wpa_ies == MFALSE) {
/* hard code setting to wpa2-psk */
sys_config.protocol = PROTOCOL_WPA2;
sys_config.key_mgmt = KEY_MGMT_PSK;
sys_config.wpa_cfg.pairwise_cipher_wpa2 =
CIPHER_AES_CCMP;
sys_config.wpa_cfg.group_cipher =
CIPHER_AES_CCMP;
}
}
}
#endif /* COMPAT_WIRELESS */
/* If the security mode is configured as WEP or WPA-PSK, it will
disable 11n automatically, and if configured as open(off) or
wpa2-psk, it will automatically enable 11n */
if ((sys_config.protocol == PROTOCOL_STATIC_WEP) ||
(sys_config.protocol == PROTOCOL_WPA))
enable_11n = MFALSE;
if (!enable_11n) {
woal_uap_set_11n_status(&sys_config, MLAN_ACT_DISABLE);
} else {
woal_uap_set_11n_status(&sys_config, MLAN_ACT_ENABLE);
woal_set_get_tx_bf_cap(priv, MLAN_ACT_GET,
&sys_config.tx_bf_cap);
}
if (MLAN_STATUS_SUCCESS != woal_set_get_sys_config(priv,
MLAN_ACT_SET,
MOAL_IOCTL_WAIT,
&sys_config)) {
ret = -EFAULT;
goto done;
}
done:
LEAVE();
return ret;
}
