/*!
* \brief Init the push button 3 sensor.
*
* \return true upon success, false if error.
*/
bool b_pushb3_init ( void )
{
portCHAR token[6];
// Get the xCFGMutex.
if( pdTRUE == x_supervisor_SemaphoreTake( xCFGMutex, 20 ) )
{
// get the field
if (config_file_get_value(SENSOR_PB3_CONFIG_FILE, "alarm" , token) >= 0)
{
// update value
if (!strcmp(token, "on"))
{
bAlarm3 = pdTRUE;
}
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
/* configure push button to produce IT on input change */
gpio_enable_pin_interrupt(PB3_POSITION , GPIO_PIN_CHANGE);
/* Disable all interrupts */
Disable_global_interrupt();
/* register push button 3 handler on level 3 */
INTC_register_interrupt( (__int_handler)&vpushb_ISR, AVR32_GPIO_IRQ_0 + (PB3_POSITION/8), AVR32_INTC_INT3);
/* Enable all interrupts */
Enable_global_interrupt();
return (true);
}
//!
//! @brief USB Command Block Wrapper (CBW) management
//!
//! This function decodes the CBW command and stores the SCSI command.
//!
static void usb_mass_storage_cbw(void)
{
bool cbw_error;
Usb_reset_endpoint_fifo_access(EP_MS_OUT);
//! Check if dCBWSignature is correct
cbw_error = (Usb_read_endpoint_data(EP_MS_OUT, 32) != *(U32 *)&"USBC");
//! Store CBW Tag to be repeated in CSW
dCBWTag = Usb_read_endpoint_data(EP_MS_OUT, 32);
g_scsi_data_remaining = Usb_read_endpoint_data(EP_MS_OUT, 32);
g_scsi_data_remaining = usb_format_usb_to_mcu_data(32, g_scsi_data_remaining);
//! if (bmCBWFlags.bit7 == 1) {direction = IN;}
if (Usb_read_endpoint_data(EP_MS_OUT, 8))
{
ms_endpoint = EP_MS_IN;
if (cbw_error)
{
Usb_ack_out_received_free(EP_MS_OUT);
Usb_enable_stall_handshake(EP_MS_IN);
return;
}
}
else
{
ms_endpoint = EP_MS_OUT;
if (cbw_error)
{
Usb_enable_stall_handshake(EP_MS_OUT);
Usb_ack_out_received_free(EP_MS_OUT);
return;
}
}
usb_LUN = Usb_read_endpoint_data(EP_MS_OUT, 8);
if (!ms_multiple_drive)
{
usb_LUN = get_cur_lun();
}
//! Dummy CBWCBLength read
Usb_read_endpoint_data(EP_MS_OUT, 8);
//! Store scsi_command
usb_read_ep_rxpacket(EP_MS_OUT, g_scsi_command, sizeof(g_scsi_command), NULL);
Usb_ack_out_received_free(EP_MS_OUT);
// Take the USB Mutex(i.e. we're allowed to perform a ms cmd).
/* if( ( pdFALSE == ( xGiveUsbMutex = x_supervisor_SemaphoreTake( xUSBMutex, 0 ) ) ) || ( !scsi_decode_command() && g_scsi_data_remaining ) ) */
if( ( pdFALSE == (xGiveUsbMutex = x_supervisor_SemaphoreTake( xUSBMutex, 0 ) ) )
|| ( !scsi_decode_command() && g_scsi_data_remaining ) )
{
Usb_enable_stall_handshake(ms_endpoint);
}
}
/*!
* \brief The log-to-file task.
*
*/
static portTASK_FUNCTION( vLogToFileTask, pvParameters )
{
int fd_current_logfile;
/* Just to stop compiler warnings. */
( void ) pvParameters;
xDataLogStatus = SYS_STATUS_RUNNING;
/* Init the current log file name. */
*acLogFileName = '\0';
*acPreviousLogFileName = '\0';
for(;;)
{
/* 1) Suspend ourselves. */
vTaskSuspend( NULL ); // TO KEEP
// NOTE: the task should be resumed when it is necessary to log the data
// to the current log file, i.e.:
// (*) if the xLogQueue is 75% full,
// OR
// (*) if the vDataLog_FlushLogs() has been called.
// Take the data logger system mutex.
if( false == x_supervisor_SemaphoreTake( xLOGMutex, 0 ) ) // 0 == Do not wait for the mutex.
{
// Pop the oldest logs from the logs queue so that the Control Panel
// can still do logs acquisition.
prv_vsave_logs( -1 );
continue;
}
/* 2) Log the data into the current log file. */
// 2a) Open the current log file.
fd_current_logfile = prv_xopen_current_logfile();
/* if( -1 == fd_current_logfile )
{ // Should never happen (cf prv_xopen_current_logfile() final implem.)
continue;
} */
// Although the open should not fail, if it happens(!!!), prv_vsave_logs()
// will correctly handle the (-1) value by just poping the oldest logs from
// the logs queue.
// 2b) Move each item of the queue to the log file then close the file.
prv_vsave_logs(fd_current_logfile);
// Release the data logger system mutex.
x_supervisor_SemaphoreGive( xLOGMutex );
}
}
/*!
* \brief Init the temperature channel.
*
* \return true upon success, false if error.
*/
bool b_temperature_init ( void )
{
portCHAR token[6];
portCHAR * unit;
// Get the xCFGMutex.
if( pdTRUE == x_supervisor_SemaphoreTake( xCFGMutex, 0 ) )
{
// get the field
if (config_file_get_value(SENSOR_TEMP_CONFIG_FILE, "alarm" , token) >= 0)
{
// update value
if (!strcmp(token, "on"))
{
b_temp_alarm = pdTRUE;
}
}
if (config_file_get_value(SENSOR_TEMP_CONFIG_FILE, "min" , token) >= 0)
{
unit = strpbrk(token , "C");
if (unit != NULL)
{
*unit = '\0';
}
l_temp_min = atol(token);
}
if (config_file_get_value(SENSOR_TEMP_CONFIG_FILE, "max" , token) >= 0)
{
unit = strpbrk(token , "C");
if (unit != NULL)
{
*unit = '\0';
}
l_temp_max = atol(token);
}
if (config_file_get_value(SENSOR_TEMP_CONFIG_FILE, "lograte" , token) >= 0)
{
ul_temp_lograte = atoi(token);
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
/* enable pin for sensor */
gpio_enable_module_pin( ADC_TEMPERATURE_PIN , ADC_TEMPERATURE_FUNCTION );
return (true);
}
/*!
* \brief Init the potentiometer channel.
*
* \return true upon success, false if error.
*/
bool b_potentiometer_init ( void )
{
portCHAR token[6];
portCHAR * percent;
// Get the xCFGMutex.
if( pdTRUE == x_supervisor_SemaphoreTake( xCFGMutex, 0 ) )
{
// get the field
if (config_file_get_value(SENSOR_POT_CONFIG_FILE, "alarm" , token) >= 0)
{
// update value
if (!strcmp(token, "on"))
{
b_pot_alarm = pdTRUE;
}
}
if (config_file_get_value(SENSOR_POT_CONFIG_FILE, "min" , token) >= 0)
{
percent = strpbrk(token , "%");
if (percent != NULL)
{
*percent = '\0';
}
sscanf(token, "%u", &ul_pot_min);
}
if (config_file_get_value(SENSOR_POT_CONFIG_FILE, "max" , token) >= 0)
{
percent = strpbrk(token , "%");
if (percent != NULL)
{
*percent = '\0';
}
sscanf(token, "%u", &ul_pot_max);
}
if (config_file_get_value(SENSOR_POT_CONFIG_FILE, "lograte" , token) >= 0)
{
sscanf(token, "%u", &ul_pot_lograte);
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
/* enable pin for sensor */
gpio_enable_module_pin( ADC_POTENTIOMETER_PIN , ADC_POTENTIOMETER_FUNCTION );
return (true);
}
/*!
* \brief Init the joystick sensor.
*
* \return true upon success, false if error.
*/
bool b_joystick_init ( void )
{
portCHAR token[6];
// Get the xCFGMutex.
if( pdTRUE == x_supervisor_SemaphoreTake( xCFGMutex, 0 ) )
{
// get the field
if (config_file_get_value(SENSOR_JS_CONFIG_FILE, "alarm" , token) >= 0)
{
// update value
if (!strcmp(token, "on"))
{
bAlarm = pdTRUE;
}
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
/* configure joystick up to produce IT on all state change */
gpio_enable_pin_interrupt(GPIO_JOYSTICK_UP , GPIO_PIN_CHANGE);
/* configure joystick down to produce IT on all state change */
gpio_enable_pin_interrupt(GPIO_JOYSTICK_DOWN , GPIO_PIN_CHANGE);
/* configure joystick right to produce IT on all state change */
gpio_enable_pin_interrupt(GPIO_JOYSTICK_RIGHT , GPIO_PIN_CHANGE);
/* configure joystick left to produce IT on all state change */
gpio_enable_pin_interrupt(GPIO_JOYSTICK_LEFT , GPIO_PIN_CHANGE);
/* configure joystick press to produce IT on all state change */
gpio_enable_pin_interrupt(GPIO_JOYSTICK_PUSH , GPIO_PIN_CHANGE);
/* Disable all interrupts */
Disable_global_interrupt();
/* register joystick handler on level 3 */
INTC_register_interrupt( (__int_handler)&vjoystick_ISR, AVR32_GPIO_IRQ_0 + (GPIO_JOYSTICK_UP/8), AVR32_INTC_INT3);
INTC_register_interrupt( (__int_handler)&vjoystick_ISR, AVR32_GPIO_IRQ_0 + (GPIO_JOYSTICK_PUSH/8), AVR32_INTC_INT3);
/* Enable all interrupts */
Enable_global_interrupt();
return (true);
}
/*! \brief WEB server main task
* check for incoming connection and process it
*
*/
portTASK_FUNCTION( vBasicWEBServer, pvParameters )
{
struct netconn *pxHTTPListener, *pxNewConnection;
portCHAR token[6];
portSHORT TaskIdx;
portLONG err_count;
/* initialize current nb connection */
sCurrentNbHTTPConn = 0;
vSemaphoreCreateBinary( xMutexNbHTTPConn );
x_default_page_len = strlen( pcDefaultPage );
/* HTTP configuration. */
// Get the xCFGMutex.
if( pdFALSE == x_supervisor_SemaphoreTake( xCFGMutex, 0 ) )
{
// Failed to get the CFG mutex, use the default HTTP config.
webHttpPort = webHTTP_PORT;
}
// Mutex has been taken
else
{
// get the field value for port number
if (config_file_get_value(HTTP_CONFIG_FILE, "port" , token) >= 0)
{
sscanf(token, "%u", &webHttpPort);
}
// if it does not exist, use the default value
else
{
webHttpPort = webHTTP_PORT;
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
// Create a new tcp connection handle
pxHTTPListener = netconn_new( NETCONN_TCP );
netconn_bind(pxHTTPListener, NULL, webHttpPort );
netconn_listen( pxHTTPListener );
// Loop forever
for( ;; )
{
#if ( (LWIP_VERSION) == ((1U << 24) | (3U << 16) | (2U << 8) | (LWIP_VERSION_RC)) )
/* Wait for a first connection. */
pxNewConnection = netconn_accept(pxHTTPListener);
#else
while(netconn_accept(pxHTTPListener, &pxNewConnection) != ERR_OK)
{
vTaskDelay( webSHORT_DELAY );
}
#endif
if(pxNewConnection != NULL)
{
/* read the nb of connection, no need to use Mutex */
while( webHTTP_NB_CONN == sCurrentNbHTTPConn )
{
vTaskDelay( webSHORT_DELAY );
}
// Take the xWEBMutex if there are no active connections.
if( 0 == sCurrentNbHTTPConn )
{
if( pdFALSE == x_supervisor_SemaphoreTake( xWEBMutex, 0 ) )
{
prvweb_SendErrorPage( pxNewConnection, 503, "", "AVR32 UC3 Web server under maintenance." );
// Close the connection.
vTaskDelay( 50 );
err_count = 4;
while( netconn_close( pxNewConnection ) != ERR_OK )
{
if (--err_count == 0) break;
vTaskDelay( webSHORT_DELAY );
}
err_count = 4;
while( netconn_delete( pxNewConnection ) != ERR_OK )
{
if (--err_count == 0) break;
vTaskDelay( webSHORT_DELAY );
}
continue;
}
}
// Find an available spot in the tTaskHandle[] array.
// We're sure to find one because sCurrentNbHTTPConn < webHTTP_NB_CONN.
TaskIdx = 0;
while( NULL != tTaskHandle[TaskIdx] ) TaskIdx++;
while( xSemaphoreTake(xMutexNbHTTPConn , portMAX_DELAY ) != pdTRUE );
sCurrentNbHTTPConn++;
// Release the mutex.
xSemaphoreGive( xMutexNbHTTPConn );
// TRACE_COM2( "nb http conn:%d",sCurrentNbHTTPConn );
if( xTaskCreate( prvweb_ProcessSingleConnection,
( signed portCHAR * )"WCONN",
webHTTP_CONNECTION_STACK_SIZE, pxNewConnection,
webHTTP_CONNECTION_PRIORITY,
&tTaskHandle[TaskIdx] ) != pdPASS)
{
TRACE_COM2( "xTaskCreate() alloc error" );
/* delete connection */
err_count = 4;
while( netconn_close( pxNewConnection ) != ERR_OK )
{
if (--err_count == 0) break;
vTaskDelay( webSHORT_DELAY );
}
err_count = 4;
while( netconn_delete( pxNewConnection ) != ERR_OK )
{
if (--err_count == 0) break;
vTaskDelay( webSHORT_DELAY );
}
while( xSemaphoreTake(xMutexNbHTTPConn , portMAX_DELAY ) != pdTRUE );
sCurrentNbHTTPConn--;
// Release the xWEBMutex if there are no active connections.
if( 0 == sCurrentNbHTTPConn )
{
x_supervisor_SemaphoreGive( xWEBMutex );
}
// Release the mutex.
xSemaphoreGive( xMutexNbHTTPConn );
}// end if task not created
}// end if new connection
}// end infinite loop
}
/*!
* \brief The switch-to-maintenance-mode command: initiate the process to \n
* switch to maintenance mode.
* Format: maintain
*
* \note This function must be of the type pfShellCmd defined by the shell module.
*
* \param xModId Input. The module that is calling this function.
* \param FsNavId Ignored.
* \param ac Ignored.
* \param av Ignored.
* \param ppcStringReply Input/Output. The response string.
* If Input is NULL, no response string will be output.
* Else a malloc for the response string is performed here;
* the caller must free this string.
*
* \return the status of the command execution.
*/
eExecStatus e_supervisor_switch_to_maintenance_mode( eModId xModId,
signed short FsNavId,
int ac, signed portCHAR *av[],
signed portCHAR **ppcStringReply )
{
if( NULL != ppcStringReply )
*ppcStringReply = NULL;
#ifdef USB_ENABLE
#if USB_DEVICE_FEATURE == true
if( ( false == bIsInMaintenance )
&& ( 0 == u8IsMaintenanceRequired ) )
{ // We're not in maintenance mode.
// Initiate the process of switching to maintenance mode.
if( 0 == u8IsMaintenanceRequired ) u8IsMaintenanceRequired++;
// Take all maintenance mutex except the USB mutex.
if( true == x_supervisor_SemaphoreTake( xLOGMutex, 0 ) ) u8IsMaintenanceRequired++;
#if NW_INTEGRATED_IN_CONTROL_PANEL
if( true == x_supervisor_SemaphoreTake( xWEBMutex, 0 ) ) u8IsMaintenanceRequired++;
#endif
if( true == x_supervisor_SemaphoreTake( xSHELLFSMutex, 0 ) ) u8IsMaintenanceRequired++;
if( true == x_supervisor_SemaphoreTake( xCFGMutex, 0 ) ) u8IsMaintenanceRequired++;
// If all mutexes have been acquired, switch to maintenance mode.
if( ( SUPERVISOR_MAINTENANCE_NBMUTEX_TOTAKE +1 ) == u8IsMaintenanceRequired )
{
fat_cache_flush(); // flush the FAT cache.
nav_reset(); // Reset all file system navigators. We will mount
// the com1shell default drive when we'll leave the
// maintenance mode.
// Switch to maintenance mode.
xSemaphoreGive( xUSBMutex );
// If the USB clock is frozen, unfreeze it so that we can write in the
// USB registers.
if(true == Is_usb_clock_frozen())
{
Usb_unfreeze_clock();
}
// If it is not akready detached, physically detach the USB device.
if(false == Is_usb_detached())
{
Usb_detach();
}
vTaskDelay(500); // Wait 500ms
Usb_attach(); // Reconnect the device.
bIsInMaintenance = true;
u8IsMaintenanceRequired = 0;
TRACE_COM2( "Entering maintenance mode");
#ifdef MMILCD_ENABLE
vMMI_SetUserMenuMode( eUserMenuWaitHost, pdTRUE );
#endif
}
// ELSE: we'll switch to maintenance mode in x_supervisor_SemaphoreGive()
// (when the mutex(es) that we couldn't get will be released).
}
else
{
NAKED_TRACE_COM2( "Won't go to maintenance mode:"CRLF"bIsInMaintenance=%d u8CurrentUsbRole=%d u8IsMaintenanceRequired=%d", bIsInMaintenance, u8CurrentUsbRole, u8IsMaintenanceRequired );
}
#endif
#endif
return( SHELL_EXECSTATUS_OK );
}
/*!
* \brief Supervisor task.
*
* \return never
*/
static portTASK_FUNCTION( vSupervisorTask, pvParameters )
{
portTickType xDelayLength = SUPERVISOR_DEFAULT_PERIOD;
portTickType xLastFocusTime;
#if configHEAP_INIT == 1
#if defined(__GNUC__)
portLONG lCheckHeapDelay = 1;
#endif
#endif
#if configCTRLPANEL_TRACE == 1
portLONG lPrintTrace = 3;
#endif
portLONG lUpdateTimeDelay = 1;
#ifdef MMILCD_ENABLE
portLONG lUpdateMMITimeDelay = 1;
portCHAR DateTime[21];
struct tm *pxDate;
bool ms_connected_displayed = pdFALSE;
bool enum_connected_displayed = pdFALSE;
#endif
/* The parameters are not used. */
( void )pvParameters;
#if configCTRLPANEL_TRACE == 1
/* Initialize the dump port COM2. */
itracedump_Init();
#endif
#ifdef MMILCD_ENABLE
// The MMI module.
if( pdFALSE == bMMI_start() )
{
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
#endif
// Create the SHELL mutex.
vSemaphoreCreateBinary( xSHELLFSMutex );
if( NULL == xSHELLFSMutex )
{ // The mutex creation failed.
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
// Start the COM1 Shell module.
vStartCom1Shell( mainCOMSH_TASK_PRIORITY );
// Create the CFG mutex.
vSemaphoreCreateBinary( xCFGMutex );
if( NULL == xCFGMutex )
{ // The mutex creation failed.
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
// Start the sensor module.
if( false == bsensor_start() )
{
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
#if NW_INTEGRATED_IN_CONTROL_PANEL
// Create the Web server mutex.
vSemaphoreCreateBinary( xWEBMutex );
if( NULL == xWEBMutex )
{ // The mutex creation failed.
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
// Start network tasks.
vStartEthernetTaskLauncher( tskIDLE_PRIORITY + 1 );
#endif
// Create the LOG mutex.
vSemaphoreCreateBinary( xLOGMutex );
if( NULL == xLOGMutex )
{ // The mutex creation failed.
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
// Start the data logger module.
if( false == bdatalog_start( mainDATALOG_TASK_PRIORITY ) )
{
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
#ifdef USB_ENABLE
#if USB_DEVICE_FEATURE == true
// Create the USB mutex.
vSemaphoreCreateBinary( xUSBMutex );
if( NULL == xUSBMutex )
{ // The mutex creation failed.
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
// Immediately take the USB mutex. i.e. when we're a Mass Storage device,
// we'll refuse to give r/w access to the host until a user action. This user
// action will make the Ctrl Panel device switch to maintenance mode, in which
// the Mass Storage USB host has r/w access to the Ctrl Panel file system.
while( pdFALSE == x_supervisor_SemaphoreTake( xUSBMutex, 0 ) );
#endif
// Start the USB module tasks.
if( false == b_usbsys_start() )
{
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
#endif
#ifdef MMILCD_ENABLE
// Create the supervisor queue to deal with MMI actions
xSUPERVISORQueue = xQueueCreate( SUPERVISOR_QUEUE_SIZE, sizeof(bool *) );
if( 0 == xSUPERVISORQueue )
{
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
/* Get a File System navigator for MMI actions. */
fsaccess_take_mutex();
sMmiNavId = fsaccess_alloc_nav_id();
nav_select( sMmiNavId ); // Select the navigator.
fsaccess_give_mutex();
/* Spawn the User Action task. */
if( pdPASS != xTaskCreate( vSupervisorUserActionTask,
( const signed portCHAR * )"MMIACT",
SUPERVISOR_USER_ACTION_STACK_SIZE, NULL, SUPERVISOR_USER_ACTION_TASK_PRIORITY,
&xSupervisorUserActionHndl ) )
{
vTaskDelete( xSupervisorUserActionHndl );
// TODO: Add msg on LCD.
// vParTestSetLED( ERROR_LED_ID, pdTRUE );
while( 1 );
}
#endif // #ifdef MMILCD_ENABLE
/* We need to initialise xLastFlashTime prior to the first call to vTaskDelayUntil(). */
xLastFocusTime = xTaskGetTickCount();
#if defined(__GNUC__)
NAKED_TRACE_COM2( "heap start @=%d, heap end @=%d", \
(portBASE_TYPE *)&__heap_start__, \
(portBASE_TYPE *)&__heap_end__ );
#endif
/* Enable the watchdog timer. */
// wdt_enable( SUPERVISOR_WDT_TIMEOUT );
for(;;)
{
/* Delay for the flash period then check. */
vTaskDelayUntil( &xLastFocusTime, xDelayLength );
// wdt_clear(); // Kick the watchdog!
/* MMI USB management. */
#ifdef MMILCD_ENABLE
#ifdef USB_ENABLE
/*** Start of Host behaviour ***/
// first occurrence of MS connection, Host mode
if (ms_connected == true && ms_connected_displayed == pdFALSE)
{
// display connected logo
ms_connected_displayed = pdTRUE;
vMMI_DisplayUSBState(ms_connected_displayed);
// Display User Menu
vMMI_SetUserMenuMode(eUserMenuUSBHost, pdTRUE);
}
// first occurrence of MS disconnection, end of Host mode
if (ms_connected == false && ms_connected_displayed == pdTRUE)
{
// remove connected logo
ms_connected_displayed = pdFALSE;
vMMI_DisplayUSBState(ms_connected_displayed);
// clear User Menu
vMMI_SetUserMenuMode(eUserMenuIdle, pdTRUE);
}
/*** End of Host behaviour ***/
/*** Start of Device behaviour ***/
#if USB_DEVICE_FEATURE == true
// first occurrence of Device connection, Device mode
if (Is_device_enumerated() && ( enum_connected_displayed == pdFALSE ) )
{
if( true == bIsInMaintenance )
{
// display connected logo
enum_connected_displayed = pdTRUE;
vMMI_DisplayUSBState(enum_connected_displayed);
// Display User Menu
vMMI_SetUserMenuMode(eUserMenuUSBDevice, pdTRUE);
}
}
// first occurrence of Device disconnection, end of Device mode
else if (!Is_device_enumerated() && enum_connected_displayed == pdTRUE)
{
// remove connected logo
enum_connected_displayed = pdFALSE;
vMMI_DisplayUSBState(enum_connected_displayed);
// clear User Menu
vMMI_SetUserMenuMode(eUserMenuIdle, pdTRUE);
}
else
{
// remove connected logo => this makes the USB logo blink when the Control
// Panel is behaving as a USB key.
enum_connected_displayed = pdFALSE;
vMMI_DisplayUSBState(enum_connected_displayed);
}
/*** End of Device behaviour ***/
#endif // #if USB_DEVICE_FEATURE == true
#endif // #ifdef USB_ENABLE
#endif // #ifdef MMILCD_ENABLE
/* update time every SUPERVISOR_DELAY_TIMEUPDATE seconds. */
if( 0 == --lUpdateTimeDelay )
{
/* Update the local time. */
lUpdateTimeDelay = SUPERVISOR_DELAY_TIMEUPDATE;
xcptime_LocalTime++;
// v_cptime_UpdateLocalTime();
}
#ifdef MMILCD_ENABLE
/* Update time displayed on the LCD. */
if( 0 == --lUpdateMMITimeDelay)
{
// Get the broken-down representation of the current date.
pxDate = gmtime( &xcptime_LocalTime );
// WARNING: pxDate->tm_year == number of years since 1900.
// For years >= 2000, we'll display the last 2 digits only.
if( pxDate->tm_year >= 100 ) pxDate->tm_year -= 100;
#if DISPLAY_MMI_SECOND == 1
sprintf( DateTime, "%02d/%02d/20%02d %02d:%02d:%02d", pxDate->tm_mon +1, pxDate->tm_mday,
pxDate->tm_year, pxDate->tm_hour, pxDate->tm_min, pxDate->tm_sec );
#else
sprintf( DateTime, "%02d/%02d/20%02d %02d:%02d", pxDate->tm_mon +1, pxDate->tm_mday,
pxDate->tm_year, pxDate->tm_hour, pxDate->tm_min );
#endif
vMMI_DisplayDateAndTime(DateTime);
lUpdateMMITimeDelay = SUPERVISOR_DELAY_MMI_TIMEUPDATE;
}
// Manage MMI
vMMI_Manage();
// Manage MMI user action
prv_v_manage_user_action();
#endif // #ifdef MMILCD_ENABLE
#ifdef USB_ENABLE
if( true == bOutOfMaintenance )
{
prv_v_leave_maintenance_mode();
}
#endif
/* Execute a scheduled command if expiration date is up. */
v_cptime_ExecuteScheduledCmd();
#if configHEAP_INIT == 1
#if defined(__GNUC__)
/* Record the malloc() heap highest consumption every SUPERVISOR_DELAY_HEAPCHECK seconds. */
if( 0 == --lCheckHeapDelay )
{
lCheckHeapDelay = SUPERVISOR_DELAY_HEAPCHECK;
prvCheckMallocHeap();
}
#endif
#endif
#if configCTRLPANEL_TRACE == 1
// Display traces on USART1 every SUPERVISOR_DELAY_PRINTTASKLIST seconds.
if( 0 == --lPrintTrace )
{
lPrintTrace = SUPERVISOR_DELAY_PRINTTASKLIST; // Restart the delay.
v_syscmds_display_traces();
}
#endif
} // for(;;)
} /*lint !e715 !e818 !e830 Function definition must be standard for task creation. */
/*!
* \brief a command line executor.
*
* \param pcStringCmd Input. The cmd line to execute. NULL-terminated string.
* Format: cmd [arg] [arg=val], with 6 (arg,val) maximum.
* WARNING: this string will be modified.
* \param xModId Input. The module that is calling this exe function.
* \param FsNavId Input. The file system navigator id to use if the cmd
* is a file system command.
* \param ppcStringReply Output. The caller must free this string (by calling vportFree())
* only if it is non-NULL and the returned status is OK.
*
* \return the status of the command execution.
*/
eExecStatus Shell_exec( signed portCHAR *pcStringCmd,
eModId xModId,
signed short FsNavId,
signed portCHAR **ppcStringReply)
{
eCmdStatus xCmdStatus;
portBASE_TYPE ac;
signed portCHAR *av[SHELL_MAX_NBTOKEN];
portBASE_TYPE CmdIdx;
int i;
eExecStatus xRet;
// 1) Identify the command and tokenize the rest of the command line.
xCmdStatus = prvCmdIdentify_Tokenize( pcStringCmd, xModId, &ac, av, &CmdIdx );
if(SHELL_CMDSTATUS_NOTFOUND == xCmdStatus)
{ // Command not found.
if(ppcStringReply != NULL)
{
*ppcStringReply = (signed portCHAR *)SHELL_MSG_CMDNOTFOUND;
}
return(SHELL_EXECSTATUS_KO);
}
else if(SHELL_CMDSTATUS_PERMISSIONDENIED == xCmdStatus)
{ // Permission denied.
if(ppcStringReply != NULL)
{
*ppcStringReply = (signed portCHAR *)SHELL_MSG_PERMISSIONDENIED;
}
return(SHELL_EXECSTATUS_KO);
}
/* Get the SHELLFS mutex for File system access. */
// We put this check here to reduce the code footprint (normally it should be
// in each fs cmd function).
if( ( CmdIdx >= SHELL_FS_FIRSTCMDIDX ) && ( CmdIdx <= SHELL_FS_LASTCMDIDX ) )
{
if( pdFALSE == x_supervisor_SemaphoreTake( xSHELLFSMutex, 0 ) )
{ // Failed to get the SHELLFS mutex.
if(ppcStringReply != NULL)
{
*ppcStringReply = (signed portCHAR *)SHELL_ERRMSG_MAINTENANCEMODE;
}
return(SHELL_EXECSTATUS_KO);
}
}
/* Special case for the !! command. Only for the SYS_MODID_COM1SHELL module,
cf. a_cmd_registration[]. */
if( 0 == CmdIdx ) // !! command
{
CmdIdx = PrevCmdIdx; // Execute the previous cmd.
if( -1 == CmdIdx )
{ // No previous command.
if(ppcStringReply != NULL)
{
*ppcStringReply = (signed portCHAR *)SHELL_MSG_NOHISTORY;
}
return(SHELL_EXECSTATUS_KO);
}
ac = PrevCmdAc; // NOTE: we take a shortcut here: we suppose the caller
// keeps the same pcStringCmd from one call to another.
for(i=0; i<ac; i++) av[i] = PrevCmdAv[i];
}
else
{
PrevCmdIdx = CmdIdx; // Save the cmd (used by the !! cmd).
PrevCmdAc = ac;
for(i=0; i<ac; i++) PrevCmdAv[i] = av[i];
}
// 2) Execute the command.
if(ppcStringReply != NULL)
*ppcStringReply = NULL;
xRet = a_cmd_registration[CmdIdx].pf_exec_cmd( xModId, FsNavId, ac, av, ppcStringReply );
/* Release the SHELLFS mutex. */
if( ( CmdIdx >= SHELL_FS_FIRSTCMDIDX ) && ( CmdIdx <= SHELL_FS_LASTCMDIDX ) )
{
x_supervisor_SemaphoreGive( xSHELLFSMutex );
}
return( xRet );
}
/*!
* \brief Task for SMTP management
*/
portTASK_FUNCTION( vBasicSMTPClient, pvParameters )
{
struct sockaddr_in stServeurSockAddr;
portLONG lRetval;
portLONG lSocket = -1;
portLONG ulResponseCode = 0;
xMailDef * pxMail;
int Size, SizeRead;
portCHAR * pcRespData;
int fd;
portCHAR cToken[6];
// Just to stop compiler warnings.
( void ) pvParameters;
// Create the xMailsQueue capable of containing DATALOG_LOGSQUEUE_SIZE ptrs
// to xLogDef structures.
xMailsQueue = xQueueCreate( SMTP_MAILS_QUEUE_SIZE, sizeof( xMailDef * ) );
// SMTP configuration.
// Get the xCFGMutex.
if( pdFALSE == x_supervisor_SemaphoreTake( xCFGMutex, 500 ) )
{
// Failed to get the CFG mutex, use the default HTTP config.
uiSMTPPort = SMTP_PORT;
cMailTo[0] = '\0';
cMailFrom[0] = '\0';
cServerName[0] = '\0';
}
// Mutex has been taken
else
{
// get the field value for port number
if (config_file_get_value(SMTP_CONFIG_FILE, "port" , cToken) >= 0)
{
sscanf(cToken, "%u", &uiSMTPPort);
}
// if it does not exist, use the default value
else
{
uiSMTPPort = SMTP_PORT;
}
// try to get the mailto field
if (config_file_get_value(SMTP_CONFIG_FILE, "mailto", cMailTo) < 0)
{
cMailTo[0] = '\0';
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No mailto configured !!Please fill mailto= field in %s\r\n", SMTP_CONFIG_FILE);
}
// try to get the mailfrom field
if (config_file_get_value(SMTP_CONFIG_FILE, "mailfrom", cMailFrom) < 0)
{
cMailFrom[0] = '\0';
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No mailfrom configured !!Please fill mailfrom= field in %s\r\n", SMTP_CONFIG_FILE);
}
// try to get the server field
if (config_file_get_value(SMTP_CONFIG_FILE, "server", cServerName) < 0)
{
cServerName[0] = '\0';
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No server name configured !! Please fill server= field in %s\r\n", SMTP_CONFIG_FILE);
}
// Release the xCFGMutex.
x_supervisor_SemaphoreGive( xCFGMutex );
}
for(;;)
{
// NOTE: the task should be resumed when it is necessary to send a mail
// Get the oldest mail from the queue.
// NOTE: we are sure there is an item to get => no block time.
if( pdTRUE == xQueueReceive( xMailsQueue, &pxMail, ( portTickType )1000 ) )
{
if (cServerName[0] == '\0')
{
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No server name configured !! Please fill server= field in %s\r\n", SMTP_CONFIG_FILE);
}
else if (cMailTo[0] == '\0')
{
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No mailto configured !!Please fill mailto= field in %s\r\n", SMTP_CONFIG_FILE);
}
else if (cMailFrom[0] == '\0')
{
// can't find field in config file, warn user
NAKED_TRACE_COM2("Warning : No mailfrom configured !!Please fill mailfrom= field in %s\r\n", SMTP_CONFIG_FILE);
}
else
{
// Set up port
memset(&stServeurSockAddr, 0, sizeof(stServeurSockAddr));
stServeurSockAddr.sin_len = sizeof(stServeurSockAddr);
stServeurSockAddr.sin_addr.s_addr = inet_addr(cServerName);
stServeurSockAddr.sin_port = htons(uiSMTPPort);
stServeurSockAddr.sin_family = AF_INET;
// socket as a stream
if ( (lSocket = socket(AF_INET, SOCK_STREAM, 0)) < 0)
{
// socket failed
NAKED_TRACE_COM2("Socket Failed\r\n");
}
// connect to the server
if(connect(lSocket,(struct sockaddr *)&stServeurSockAddr,sizeof(stServeurSockAddr)) < 0)
{
// connect failed
NAKED_TRACE_COM2("Connect Failed\r\n");
}
else
{
eSMTPCurrentState = eSMTPIdle;
while ( eSMTPCurrentState != eSMTPMailSent )
{
// wait for SMTP Server answer
do
{
lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
}while (lRetval <= 0);
cTempBuffer[3] = '\0';
// Get the response code from server
ulResponseCode = atoi(cTempBuffer);
switch (ulResponseCode)
{
case 220:
{
// send helo
send(lSocket, "HELO ", 5, 0);
send(lSocket, cServerName, strlen(cServerName), 0);
send(lSocket, "\r\n", 2, 0);
eSMTPCurrentState = eSMTPHeloSent;
break;
}
case 221:
{
// QUIT sequence has been acknowledged by server
if (eSMTPCurrentState == eSMTPQuitSent)
{
eSMTPCurrentState = eSMTPMailSent;
}
break;
}
case 250:
{
if (eSMTPCurrentState == eSMTPHeloSent)
{
// send MAIL FROM
send(lSocket, "MAIL FROM: <", 12, 0); ;
send(lSocket, cMailFrom, strlen(cMailFrom), 0);
send(lSocket, ">\r\n", 3, 0);
eSMTPCurrentState = eSMTPMailFromSent;
}
else if (eSMTPCurrentState == eSMTPMailFromSent)
{
// send MAIL TO
send(lSocket, "RCPT TO: <", 10, 0); ;
send(lSocket, cMailTo, strlen(cMailTo), 0);
send(lSocket, ">\r\n", 3, 0);
eSMTPCurrentState = eSMTPMailToSent;
}
else if (eSMTPCurrentState == eSMTPMailToSent)
{
// send DATA
send(lSocket, SMTP_DATA_STRING, 6, 0);
eSMTPCurrentState = eSMTPDataSent;
}
else if (eSMTPCurrentState == eSMTPContentSent)
{
// send QUIT
send(lSocket, SMTP_QUIT_STRING, 6, 0);
eSMTPCurrentState = eSMTPQuitSent;
}
break;
}
case 354:
{
if (eSMTPCurrentState == eSMTPDataSent)
{
// set Subject field
send(lSocket, "Subject:", 8, 0);
// add subject
send(lSocket, pxMail->Subject, strlen(pxMail->Subject), 0);
send(lSocket, "\r\nFROM:", 7, 0);
send(lSocket, cMailFrom, strlen(cMailFrom), 0);
send(lSocket, "\r\nTO:", 5, 0);
send(lSocket, cMailTo, strlen(cMailTo), 0);
send(lSocket, "\r\n\r\n", 4, 0);
// if a file has been specified, copy the content in the mail body
if (pxMail->File != NULL)
{
// allocate response
pcRespData = (portCHAR *)pvPortMalloc(SMTP_PACKET_SIZE);
if (pcRespData != NULL)
{
if ((fd = open((const char *)pxMail->File, O_RDONLY)) >= 0)
{
Size = fsaccess_file_get_size(fd);
// get sectors of maximum size
while(Size > 0)
{
// get the data from filesystem
SizeRead = read(fd, pcRespData, SMTP_PACKET_SIZE);
// if error occurs during the read
if (SizeRead <= 0)
{
// end the loop and send what has already been added
break;
}
// sned data to the socket
send(lSocket, pcRespData, SizeRead, 0);
// decrease remaing size
Size -= SizeRead;
}
// close the file
close(fd);
// free the buffer
vPortFree(pcRespData);
}
else
{
// warn user : can't open the file
NAKED_TRACE_COM2("Open file fails\r\n");
}
}
else
{
// warn user : can't malloc the file buffer
NAKED_TRACE_COM2("SMTP : Malloc fails\r\n");
}
}
// add "<CRLF>.<CRLF>"
send(lSocket, SMTP_MAIL_END_STRING, 5, 0);
eSMTPCurrentState = eSMTPContentSent;
}
break;
}
default:
{
// unknown SMTP code
NAKED_TRACE_COM2("Unimplented %l SMTP response from server\r\n",ulResponseCode);
// break loop and reset state machine
eSMTPCurrentState = eSMTPMailSent;
break;
}
}
}
// close the socket
close(lSocket);
}
// if the item was not posted from ISR
if (pxMail->NeedFree == pdTRUE)
{
// if a file has been specified
if ( pxMail->File != NULL )
{
// free the item
vPortFree(pxMail->File);
}
// free the items
vPortFree(pxMail->Subject);
vPortFree(pxMail);
}
}
}
}
}
