static void
xf86ReleaseKeys(DeviceIntPtr pDev)
{
KeyClassPtr keyc;
int i, sigstate;
if (!pDev || !pDev->key)
return;
keyc = pDev->key;
/*
* Hmm... here is the biggest hack of every time !
* It may be possible that a switch-vt procedure has finished BEFORE
* you released all keys neccessary to do this. That peculiar behavior
* can fool the X-server pretty much, cause it assumes that some keys
* were not released. TWM may stuck alsmost completly....
* OK, what we are doing here is after returning from the vt-switch
* exeplicitely unrelease all keyboard keys before the input-devices
* are reenabled.
*/
for (i = keyc->xkbInfo->desc->min_key_code;
i < keyc->xkbInfo->desc->max_key_code;
i++) {
if (key_is_down(pDev, i, KEY_POSTED)) {
sigstate = xf86BlockSIGIO ();
QueueKeyboardEvents(pDev, KeyRelease, i, NULL);
xf86UnblockSIGIO(sigstate);
}
}
}
void
xf86UDelay(long usec)
{
#if 0
struct timeval start, interrupt;
#else
int sigio;
sigio = xf86BlockSIGIO();
xf86usleep(usec);
xf86UnblockSIGIO(sigio);
#endif
#if 0
gettimeofday(&start,NULL);
do {
usleep(usec);
gettimeofday(&interrupt,NULL);
if ((usec = usec - (interrupt.tv_sec - start.tv_sec) * 1000000
- (interrupt.tv_usec - start.tv_usec)) < 0)
break;
start = interrupt;
} while (1);
#endif
}
/* ARGSUSED */
static void
xf86WarpCursor (DeviceIntPtr pDev, ScreenPtr pScreen, int x, int y)
{
int sigstate;
sigstate = xf86BlockSIGIO ();
miPointerWarpCursor(pDev, pScreen, x, y);
xf86Info.currentScreen = pScreen;
xf86UnblockSIGIO (sigstate);
}
/* ARGSUSED */
void
xf86Wakeup(pointer blockData, int err, pointer pReadmask)
{
fd_set* LastSelectMask = (fd_set*)pReadmask;
fd_set devicesWithInput;
InputInfoPtr pInfo;
if (err >= 0) {
XFD_ANDSET(&devicesWithInput, LastSelectMask, &EnabledDevices);
if (XFD_ANYSET(&devicesWithInput)) {
pInfo = xf86InputDevs;
while (pInfo) {
if (pInfo->read_input && pInfo->fd >= 0 &&
(FD_ISSET(pInfo->fd, &devicesWithInput) != 0)) {
int sigstate = xf86BlockSIGIO();
/*
* Remove the descriptior from the set because more than one
* device may share the same file descriptor.
*/
FD_CLR(pInfo->fd, &devicesWithInput);
pInfo->read_input(pInfo);
xf86UnblockSIGIO(sigstate);
}
pInfo = pInfo->next;
}
}
}
if (err >= 0) { /* we don't want the handlers called if select() */
IHPtr ih; /* returned with an error condition, do we? */
for (ih = InputHandlers; ih; ih = ih->next) {
if (ih->enabled && ih->fd >= 0 && ih->ihproc &&
(FD_ISSET(ih->fd, ((fd_set *)pReadmask)) != 0)) {
ih->ihproc(ih->fd, ih->data);
}
}
}
if (xf86VTSwitchPending()) xf86VTSwitch();
}
xf86MonPtr
xf86DoEDID_DDC1(
int scrnIndex, void (*DDC1SetSpeed)(ScrnInfoPtr, xf86ddcSpeed),
unsigned int (*DDC1Read)(ScrnInfoPtr)
)
{
ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
unsigned char *EDID_block = NULL;
xf86MonPtr tmp = NULL;
int sigio;
/* Default DDC and DDC1 to enabled. */
Bool noddc = FALSE, noddc1 = FALSE;
OptionInfoPtr options;
options = xnfalloc(sizeof(DDCOptions));
(void)memcpy(options, DDCOptions, sizeof(DDCOptions));
xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, options);
xf86GetOptValBool(options, DDCOPT_NODDC, &noddc);
xf86GetOptValBool(options, DDCOPT_NODDC1, &noddc1);
xfree(options);
if (noddc || noddc1)
return NULL;
sigio = xf86BlockSIGIO();
EDID_block = EDIDRead_DDC1(pScrn,DDC1SetSpeed,DDC1Read);
xf86UnblockSIGIO(sigio);
if (EDID_block){
tmp = xf86InterpretEDID(scrnIndex,EDID_block);
}
#ifdef DEBUG
else ErrorF("No EDID block returned\n");
if (!tmp)
ErrorF("Cannot interpret EDID block\n");
#endif
return tmp;
}
void
AbortDDX(enum ExitCode error)
{
int i;
xf86BlockSIGIO();
/*
* try to restore the original video state
*/
#ifdef DPMSExtension /* Turn screens back on */
if (DPMSPowerLevel != DPMSModeOn)
DPMSSet(serverClient, DPMSModeOn);
#endif
if (xf86Screens) {
for (i = 0; i < xf86NumScreens; i++)
if (xf86Screens[i]->vtSema) {
/*
* if we are aborting before ScreenInit() has finished
* we might not have been wrapped yet. Therefore enable
* screen explicitely.
*/
xf86VGAarbiterLock(xf86Screens[i]);
(xf86Screens[i]->LeaveVT)(i, 0);
xf86VGAarbiterUnlock(xf86Screens[i]);
}
}
xf86AccessLeave();
/*
* This is needed for an abnormal server exit, since the normal exit stuff
* MUST also be performed (i.e. the vt must be left in a defined state)
*/
ddxGiveUp(error);
}
{ -3, 0, 4 }, /* left (right release) -> pressed left */
{ -1, 0, 5 }, /* right (left release) -> pressed right */
{ 0, 0, 10 }, /* left & right -> pressed both (no change) */
{ 0, 0, -1 }, /* timeout N/A */
},
};
int
EvdevMBEmuTimer(InputInfoPtr pInfo)
{
EvdevPtr pEvdev = pInfo->private;
int sigstate;
int id;
sigstate = xf86BlockSIGIO ();
pEvdev->emulateMB.pending = FALSE;
if ((id = stateTab[pEvdev->emulateMB.state][4][0]) != 0) {
EvdevPostButtonEvent(pInfo, abs(id),
(id >= 0) ? BUTTON_PRESS : BUTTON_RELEASE);
pEvdev->emulateMB.state =
stateTab[pEvdev->emulateMB.state][4][2];
} else {
xf86IDrvMsg(pInfo, X_ERROR, "Got unexpected buttonTimer in state %d\n",
pEvdev->emulateMB.state);
}
xf86UnblockSIGIO (sigstate);
return 0;
}
int
xf86InstallSIGIOHandler(int fd, void (*f)(int, void *), void *closure)
{
struct sigaction sa;
struct sigaction osa;
int i;
int blocked;
for (i = 0; i < MAX_FUNCS; i++)
{
if (!xf86SigIOFuncs[i].f)
{
if (xf86IsPipe (fd))
return 0;
blocked = xf86BlockSIGIO();
if (fcntl(fd, F_SETFL, fcntl(fd, F_GETFL) | O_ASYNC) == -1) {
#ifdef XFree86Server
xf86Msg(X_WARNING, "fcntl(%d, O_ASYNC): %s\n",
fd, strerror(errno));
#else
fprintf(stderr,"fcntl(%d, O_ASYNC): %s\n",
fd, strerror(errno));
#endif
xf86UnblockSIGIO(blocked);
return 0;
}
if (fcntl(fd, F_SETOWN, getpid()) == -1) {
#ifdef XFree86Server
xf86Msg(X_WARNING, "fcntl(%d, F_SETOWN): %s\n",
fd, strerror(errno));
#else
fprintf(stderr,"fcntl(%d, F_SETOWN): %s\n",
fd, strerror(errno));
#endif
xf86UnblockSIGIO(blocked);
return 0;
}
sigemptyset(&sa.sa_mask);
sigaddset(&sa.sa_mask, SIGIO);
sa.sa_flags = 0;
sa.sa_handler = xf86SIGIO;
sigaction(SIGIO, &sa, &osa);
xf86SigIOFuncs[i].fd = fd;
xf86SigIOFuncs[i].closure = closure;
xf86SigIOFuncs[i].f = f;
if (i >= xf86SigIOMax)
xf86SigIOMax = i+1;
if (fd >= xf86SigIOMaxFd)
xf86SigIOMaxFd = fd + 1;
FD_SET (fd, &xf86SigIOMask);
xf86UnblockSIGIO(blocked);
return 1;
}
/* Allow overwriting of the closure and callback */
else if (xf86SigIOFuncs[i].fd == fd)
{
xf86SigIOFuncs[i].closure = closure;
xf86SigIOFuncs[i].f = f;
return 1;
}
}
return 0;
}
/*
* xf86VTSwitch --
* Handle requests for switching the vt.
*/
static void
xf86VTSwitch(void)
{
int i;
static int prevSIGIO;
InputInfoPtr pInfo;
IHPtr ih;
DebugF("xf86VTSwitch()\n");
#ifdef XFreeXDGA
if(!DGAVTSwitch())
return;
#endif
/*
* Since all screens are currently all in the same state it is sufficient
* check the first. This might change in future.
*/
if (xf86Screens[0]->vtSema) {
DebugF("xf86VTSwitch: Leaving, xf86Exiting is %s\n",
BOOLTOSTRING((dispatchException & DE_TERMINATE) ? TRUE : FALSE));
#ifdef DPMSExtension
if (DPMSPowerLevel != DPMSModeOn)
DPMSSet(serverClient, DPMSModeOn);
#endif
for (i = 0; i < xf86NumScreens; i++) {
if (!(dispatchException & DE_TERMINATE))
if (xf86Screens[i]->EnableDisableFBAccess)
(*xf86Screens[i]->EnableDisableFBAccess) (i, FALSE);
}
/*
* Keep the order: Disable Device > LeaveVT
* EnterVT > EnableDevice
*/
for (ih = InputHandlers; ih; ih = ih->next)
xf86DisableInputHandler(ih);
for (pInfo = xf86InputDevs; pInfo; pInfo = pInfo->next) {
if (pInfo->dev) {
xf86ReleaseKeys(pInfo->dev);
ProcessInputEvents();
DisableDevice(pInfo->dev, TRUE);
}
}
prevSIGIO = xf86BlockSIGIO();
for (i = 0; i < xf86NumScreens; i++)
xf86Screens[i]->LeaveVT(i, 0);
xf86AccessLeave(); /* We need this here, otherwise */
if (!xf86VTSwitchAway()) {
/*
* switch failed
*/
DebugF("xf86VTSwitch: Leave failed\n");
xf86AccessEnter();
for (i = 0; i < xf86NumScreens; i++) {
if (!xf86Screens[i]->EnterVT(i, 0))
FatalError("EnterVT failed for screen %d\n", i);
}
if (!(dispatchException & DE_TERMINATE)) {
for (i = 0; i < xf86NumScreens; i++) {
if (xf86Screens[i]->EnableDisableFBAccess)
(*xf86Screens[i]->EnableDisableFBAccess) (i, TRUE);
}
}
dixSaveScreens(serverClient, SCREEN_SAVER_FORCER, ScreenSaverReset);
pInfo = xf86InputDevs;
while (pInfo) {
if (pInfo->dev)
EnableDevice(pInfo->dev, TRUE);
pInfo = pInfo->next;
}
for (ih = InputHandlers; ih; ih = ih->next)
xf86EnableInputHandler(ih);
xf86UnblockSIGIO(prevSIGIO);
} else {
#ifdef XF86PM
if (xf86OSPMClose)
xf86OSPMClose();
xf86OSPMClose = NULL;
#endif
for (i = 0; i < xf86NumScreens; i++) {
/*
* zero all access functions to
* trap calls when switched away.
*/
xf86Screens[i]->vtSema = FALSE;
}
if (xorgHWAccess)
xf86DisableIO();
}
} else {
DebugF("xf86VTSwitch: Entering\n");
if (!xf86VTSwitchTo()) return;
#ifdef XF86PM
xf86OSPMClose = xf86OSPMOpen();
#endif
if (xorgHWAccess)
xf86EnableIO();
xf86AccessEnter();
for (i = 0; i < xf86NumScreens; i++) {
xf86Screens[i]->vtSema = TRUE;
if (!xf86Screens[i]->EnterVT(i, 0))
FatalError("EnterVT failed for screen %d\n", i);
}
for (i = 0; i < xf86NumScreens; i++) {
if (xf86Screens[i]->EnableDisableFBAccess)
(*xf86Screens[i]->EnableDisableFBAccess)(i, TRUE);
}
/* Turn screen saver off when switching back */
dixSaveScreens(serverClient, SCREEN_SAVER_FORCER, ScreenSaverReset);
pInfo = xf86InputDevs;
while (pInfo) {
if (pInfo->dev)
EnableDevice(pInfo->dev, TRUE);
pInfo = pInfo->next;
}
for (ih = InputHandlers; ih; ih = ih->next)
xf86EnableInputHandler(ih);
xf86UnblockSIGIO(prevSIGIO);
}
}
/*
* InitOutput --
* Initialize screenInfo for all actually accessible framebuffers.
* That includes vt-manager setup, querying all possible devices and
* collecting the pixmap formats.
*/
void
InitOutput(ScreenInfo *pScreenInfo, int argc, char **argv)
{
int i, j, k, scr_index, was_blocked = 0;
char **modulelist;
pointer *optionlist;
Pix24Flags screenpix24, pix24;
MessageType pix24From = X_DEFAULT;
Bool pix24Fail = FALSE;
Bool autoconfig = FALSE;
GDevPtr configured_device;
xf86Initialising = TRUE;
if (serverGeneration == 1) {
if ((xf86ServerName = strrchr(argv[0], '/')) != 0)
xf86ServerName++;
else
xf86ServerName = argv[0];
xf86PrintBanner();
xf86PrintMarkers();
if (xf86LogFile) {
time_t t;
const char *ct;
t = time(NULL);
ct = ctime(&t);
xf86MsgVerb(xf86LogFileFrom, 0, "Log file: \"%s\", Time: %s",
xf86LogFile, ct);
}
/* Read and parse the config file */
if (!xf86DoConfigure && !xf86DoShowOptions) {
switch (xf86HandleConfigFile(FALSE)) {
case CONFIG_OK:
break;
case CONFIG_PARSE_ERROR:
xf86Msg(X_ERROR, "Error parsing the config file\n");
return;
case CONFIG_NOFILE:
autoconfig = TRUE;
break;
}
}
InstallSignalHandlers();
/* Initialise the loader */
LoaderInit();
/* Tell the loader the default module search path */
LoaderSetPath(xf86ModulePath);
if (xf86Info.ignoreABI) {
LoaderSetOptions(LDR_OPT_ABI_MISMATCH_NONFATAL);
}
if (xf86DoShowOptions)
DoShowOptions();
/* Do a general bus probe. This will be a PCI probe for x86 platforms */
xf86BusProbe();
if (xf86DoConfigure)
DoConfigure();
if (autoconfig) {
if (!xf86AutoConfig()) {
xf86Msg(X_ERROR, "Auto configuration failed\n");
return;
}
}
#ifdef XF86PM
xf86OSPMClose = xf86OSPMOpen();
#endif
/* Load all modules specified explicitly in the config file */
if ((modulelist = xf86ModulelistFromConfig(&optionlist))) {
xf86LoadModules(modulelist, optionlist);
free(modulelist);
free(optionlist);
}
/* Load all driver modules specified in the config file */
/* If there aren't any specified in the config file, autoconfig them */
/* FIXME: Does not handle multiple active screen sections, but I'm not
* sure if we really want to handle that case*/
configured_device = xf86ConfigLayout.screens->screen->device;
if ((!configured_device) || (!configured_device->driver)) {
if (!autoConfigDevice(configured_device)) {
xf86Msg(X_ERROR, "Automatic driver configuration failed\n");
return ;
}
}
if ((modulelist = xf86DriverlistFromConfig())) {
xf86LoadModules(modulelist, NULL);
free(modulelist);
}
/* Load all input driver modules specified in the config file. */
if ((modulelist = xf86InputDriverlistFromConfig())) {
xf86LoadModules(modulelist, NULL);
free(modulelist);
}
/*
* It is expected that xf86AddDriver()/xf86AddInputDriver will be
* called for each driver as it is loaded. Those functions save the
* module pointers for drivers.
* XXX Nothing keeps track of them for other modules.
*/
/* XXX What do we do if not all of these could be loaded? */
/*
* At this point, xf86DriverList[] is all filled in with entries for
* each of the drivers to try and xf86NumDrivers has the number of
* drivers. If there are none, return now.
*/
if (xf86NumDrivers == 0) {
xf86Msg(X_ERROR, "No drivers available.\n");
return;
}
/*
* Call each of the Identify functions and call the driverFunc to check
* if HW access is required. The Identify functions print out some
* identifying information, and anything else that might be
* needed at this early stage.
*/
for (i = 0; i < xf86NumDrivers; i++) {
if (xf86DriverList[i]->Identify != NULL)
xf86DriverList[i]->Identify(0);
if (!xorgHWAccess || !xorgHWOpenConsole) {
xorgHWFlags flags;
if(!xf86DriverList[i]->driverFunc
|| !xf86DriverList[i]->driverFunc(NULL,
GET_REQUIRED_HW_INTERFACES,
&flags))
flags = HW_IO;
if(NEED_IO_ENABLED(flags))
xorgHWAccess = TRUE;
if(!(flags & HW_SKIP_CONSOLE))
xorgHWOpenConsole = TRUE;
}
}
if (xorgHWOpenConsole)
xf86OpenConsole();
else
xf86Info.dontVTSwitch = TRUE;
if (xf86BusConfig() == FALSE)
return;
xf86PostProbe();
/*
* Sort the drivers to match the requested ording. Using a slow
* bubble sort.
*/
for (j = 0; j < xf86NumScreens - 1; j++) {
for (i = 0; i < xf86NumScreens - j - 1; i++) {
if (xf86Screens[i + 1]->confScreen->screennum <
xf86Screens[i]->confScreen->screennum) {
ScrnInfoPtr tmpScrn = xf86Screens[i + 1];
xf86Screens[i + 1] = xf86Screens[i];
xf86Screens[i] = tmpScrn;
}
}
}
/* Fix up the indexes */
for (i = 0; i < xf86NumScreens; i++) {
xf86Screens[i]->scrnIndex = i;
}
/*
* Call the driver's PreInit()'s to complete initialisation for the first
* generation.
*/
for (i = 0; i < xf86NumScreens; i++) {
xf86VGAarbiterScrnInit(xf86Screens[i]);
xf86VGAarbiterLock(xf86Screens[i]);
if (xf86Screens[i]->PreInit &&
xf86Screens[i]->PreInit(xf86Screens[i], 0))
xf86Screens[i]->configured = TRUE;
xf86VGAarbiterUnlock(xf86Screens[i]);
}
for (i = 0; i < xf86NumScreens; i++)
if (!xf86Screens[i]->configured)
xf86DeleteScreen(i--, 0);
/*
* If no screens left, return now.
*/
if (xf86NumScreens == 0) {
xf86Msg(X_ERROR,
"Screen(s) found, but none have a usable configuration.\n");
return;
}
for (i = 0; i < xf86NumScreens; i++) {
if (xf86Screens[i]->name == NULL) {
XNFasprintf(&xf86Screens[i]->name, "screen%d", i);
xf86MsgVerb(X_WARNING, 0,
"Screen driver %d has no name set, using `%s'.\n",
i, xf86Screens[i]->name);
}
}
/* Remove (unload) drivers that are not required */
for (i = 0; i < xf86NumDrivers; i++)
if (xf86DriverList[i] && xf86DriverList[i]->refCount <= 0)
xf86DeleteDriver(i);
/*
* At this stage we know how many screens there are.
*/
for (i = 0; i < xf86NumScreens; i++)
xf86InitViewport(xf86Screens[i]);
/*
* Collect all pixmap formats and check for conflicts at the display
* level. Should we die here? Or just delete the offending screens?
*/
screenpix24 = Pix24DontCare;
for (i = 0; i < xf86NumScreens; i++) {
if (xf86Screens[i]->imageByteOrder !=
xf86Screens[0]->imageByteOrder)
FatalError("Inconsistent display bitmapBitOrder. Exiting\n");
if (xf86Screens[i]->bitmapScanlinePad !=
xf86Screens[0]->bitmapScanlinePad)
FatalError("Inconsistent display bitmapScanlinePad. Exiting\n");
if (xf86Screens[i]->bitmapScanlineUnit !=
xf86Screens[0]->bitmapScanlineUnit)
FatalError("Inconsistent display bitmapScanlineUnit. Exiting\n");
if (xf86Screens[i]->bitmapBitOrder !=
xf86Screens[0]->bitmapBitOrder)
FatalError("Inconsistent display bitmapBitOrder. Exiting\n");
/* Determine the depth 24 pixmap format the screens would like */
if (xf86Screens[i]->pixmap24 != Pix24DontCare) {
if (screenpix24 == Pix24DontCare)
screenpix24 = xf86Screens[i]->pixmap24;
else if (screenpix24 != xf86Screens[i]->pixmap24)
FatalError("Inconsistent depth 24 pixmap format. Exiting\n");
}
}
/* check if screenpix24 is consistent with the config/cmdline */
if (xf86Info.pixmap24 != Pix24DontCare) {
pix24 = xf86Info.pixmap24;
pix24From = xf86Info.pix24From;
if (screenpix24 != Pix24DontCare && screenpix24 != xf86Info.pixmap24)
pix24Fail = TRUE;
} else if (screenpix24 != Pix24DontCare) {
pix24 = screenpix24;
pix24From = X_PROBED;
} else
pix24 = Pix24Use32;
if (pix24Fail)
FatalError("Screen(s) can't use the required depth 24 pixmap format"
" (%d). Exiting\n", PIX24TOBPP(pix24));
/* Initialise the depth 24 format */
for (j = 0; j < numFormats && formats[j].depth != 24; j++)
;
formats[j].bitsPerPixel = PIX24TOBPP(pix24);
/* Collect additional formats */
for (i = 0; i < xf86NumScreens; i++) {
for (j = 0; j < xf86Screens[i]->numFormats; j++) {
for (k = 0; ; k++) {
if (k >= numFormats) {
if (k >= MAXFORMATS)
FatalError("Too many pixmap formats! Exiting\n");
formats[k] = xf86Screens[i]->formats[j];
numFormats++;
break;
}
if (formats[k].depth == xf86Screens[i]->formats[j].depth) {
if ((formats[k].bitsPerPixel ==
xf86Screens[i]->formats[j].bitsPerPixel) &&
(formats[k].scanlinePad ==
xf86Screens[i]->formats[j].scanlinePad))
break;
FatalError("Inconsistent pixmap format for depth %d."
" Exiting\n", formats[k].depth);
}
}
}
}
formatsDone = TRUE;
if (xf86Info.vtno >= 0 ) {
#define VT_ATOM_NAME "XFree86_VT"
Atom VTAtom=-1;
CARD32 *VT = NULL;
int ret;
/* This memory needs to stay available until the screen has been
initialized, and we can create the property for real.
*/
if ( (VT = malloc(sizeof(CARD32)))==NULL ) {
FatalError("Unable to make VT property - out of memory. Exiting...\n");
}
*VT = xf86Info.vtno;
VTAtom = MakeAtom(VT_ATOM_NAME, sizeof(VT_ATOM_NAME) - 1, TRUE);
for (i = 0, ret = Success; i < xf86NumScreens && ret == Success; i++) {
ret = xf86RegisterRootWindowProperty(xf86Screens[i]->scrnIndex,
VTAtom, XA_INTEGER, 32,
1, VT );
if (ret != Success)
xf86DrvMsg(xf86Screens[i]->scrnIndex, X_WARNING,
"Failed to register VT property\n");
}
}
if (SeatId) {
Atom SeatAtom;
SeatAtom = MakeAtom(SEAT_ATOM_NAME, sizeof(SEAT_ATOM_NAME) - 1, TRUE);
for (i = 0; i < xf86NumScreens; i++) {
int ret;
ret = xf86RegisterRootWindowProperty(xf86Screens[i]->scrnIndex,
SeatAtom, XA_STRING, 8,
strlen(SeatId)+1, SeatId );
if (ret != Success) {
xf86DrvMsg(xf86Screens[i]->scrnIndex, X_WARNING,
"Failed to register seat property\n");
}
}
}
/* If a screen uses depth 24, show what the pixmap format is */
for (i = 0; i < xf86NumScreens; i++) {
if (xf86Screens[i]->depth == 24) {
xf86Msg(pix24From, "Depth 24 pixmap format is %d bpp\n",
PIX24TOBPP(pix24));
break;
}
}
} else {
/*
* serverGeneration != 1; some OSs have to do things here, too.
*/
if (xorgHWOpenConsole)
xf86OpenConsole();
#ifdef XF86PM
/*
should we reopen it here? We need to deal with an already opened
device. We could leave this to the OS layer. For now we simply
close it here
*/
if (xf86OSPMClose)
xf86OSPMClose();
if ((xf86OSPMClose = xf86OSPMOpen()) != NULL)
xf86MsgVerb(X_INFO, 3, "APM registered successfully\n");
#endif
/* Make sure full I/O access is enabled */
if (xorgHWAccess)
xf86EnableIO();
}
/*
* Use the previously collected parts to setup pScreenInfo
*/
pScreenInfo->imageByteOrder = xf86Screens[0]->imageByteOrder;
pScreenInfo->bitmapScanlinePad = xf86Screens[0]->bitmapScanlinePad;
pScreenInfo->bitmapScanlineUnit = xf86Screens[0]->bitmapScanlineUnit;
pScreenInfo->bitmapBitOrder = xf86Screens[0]->bitmapBitOrder;
pScreenInfo->numPixmapFormats = numFormats;
for (i = 0; i < numFormats; i++)
pScreenInfo->formats[i] = formats[i];
/* Make sure the server's VT is active */
if (serverGeneration != 1) {
xf86Resetting = TRUE;
/* All screens are in the same state, so just check the first */
if (!xf86Screens[0]->vtSema) {
#ifdef HAS_USL_VTS
ioctl(xf86Info.consoleFd, VT_RELDISP, VT_ACKACQ);
#endif
xf86AccessEnter();
was_blocked = xf86BlockSIGIO();
}
}
for (i = 0; i < xf86NumScreens; i++)
if (!xf86ColormapAllocatePrivates(xf86Screens[i]))
FatalError("Cannot register DDX private keys");
if (!dixRegisterPrivateKey(&xf86ScreenKeyRec, PRIVATE_SCREEN, 0) ||
!dixRegisterPrivateKey(&xf86CreateRootWindowKeyRec, PRIVATE_SCREEN, 0))
FatalError("Cannot register DDX private keys");
for (i = 0; i < xf86NumScreens; i++) {
xf86VGAarbiterLock(xf86Screens[i]);
/*
* Almost everything uses these defaults, and many of those that
* don't, will wrap them.
*/
xf86Screens[i]->EnableDisableFBAccess = xf86EnableDisableFBAccess;
#ifdef XFreeXDGA
xf86Screens[i]->SetDGAMode = xf86SetDGAMode;
#endif
xf86Screens[i]->DPMSSet = NULL;
xf86Screens[i]->LoadPalette = NULL;
xf86Screens[i]->SetOverscan = NULL;
xf86Screens[i]->DriverFunc = NULL;
xf86Screens[i]->pScreen = NULL;
scr_index = AddScreen(xf86Screens[i]->ScreenInit, argc, argv);
xf86VGAarbiterUnlock(xf86Screens[i]);
if (scr_index == i) {
/*
* Hook in our ScrnInfoRec, and initialise some other pScreen
* fields.
*/
dixSetPrivate(&screenInfo.screens[scr_index]->devPrivates,
xf86ScreenKey, xf86Screens[i]);
xf86Screens[i]->pScreen = screenInfo.screens[scr_index];
/* The driver should set this, but make sure it is set anyway */
xf86Screens[i]->vtSema = TRUE;
} else {
/* This shouldn't normally happen */
FatalError("AddScreen/ScreenInit failed for driver %d\n", i);
}
DebugF("InitOutput - xf86Screens[%d]->pScreen = %p\n",
i, xf86Screens[i]->pScreen );
DebugF("xf86Screens[%d]->pScreen->CreateWindow = %p\n",
i, xf86Screens[i]->pScreen->CreateWindow );
dixSetPrivate(&screenInfo.screens[scr_index]->devPrivates,
xf86CreateRootWindowKey,
xf86Screens[i]->pScreen->CreateWindow);
xf86Screens[i]->pScreen->CreateWindow = xf86CreateRootWindow;
if (PictureGetSubpixelOrder (xf86Screens[i]->pScreen) == SubPixelUnknown)
{
xf86MonPtr DDC = (xf86MonPtr)(xf86Screens[i]->monitor->DDC);
PictureSetSubpixelOrder (xf86Screens[i]->pScreen,
DDC ?
(DDC->features.input_type ?
SubPixelHorizontalRGB : SubPixelNone) :
SubPixelUnknown);
}
#ifdef RANDR
if (!xf86Info.disableRandR)
xf86RandRInit (screenInfo.screens[scr_index]);
xf86Msg(xf86Info.randRFrom, "RandR %s\n",
xf86Info.disableRandR ? "disabled" : "enabled");
#endif
}
xf86VGAarbiterWrapFunctions();
xf86UnblockSIGIO(was_blocked);
xf86InitOrigins();
xf86Resetting = FALSE;
xf86Initialising = FALSE;
RegisterBlockAndWakeupHandlers((BlockHandlerProcPtr)NoopDDA, xf86Wakeup,
NULL);
}
Bool
xf86SwitchMode(ScreenPtr pScreen, DisplayModePtr mode)
{
ScrnInfoPtr pScr = XF86SCRNINFO(pScreen);
ScreenPtr pCursorScreen;
Bool Switched;
int px, py, was_blocked;
DeviceIntPtr dev, it;
if (!pScr->vtSema || !mode || !pScr->SwitchMode)
return FALSE;
#ifdef XFreeXDGA
if (DGAActive(pScr->scrnIndex))
return FALSE;
#endif
if (mode == pScr->currentMode)
return TRUE;
if (mode->HDisplay > pScr->virtualX || mode->VDisplay > pScr->virtualY)
return FALSE;
/* Let's take an educated guess for which pointer to take here. And about as
educated as it gets is to take the first pointer we find.
*/
for (dev = inputInfo.devices; dev; dev = dev->next)
{
if (IsPointerDevice(dev) && dev->spriteInfo->spriteOwner)
break;
}
pCursorScreen = miPointerGetScreen(dev);
if (pScreen == pCursorScreen)
miPointerGetPosition(dev, &px, &py);
was_blocked = xf86BlockSIGIO();
Switched = (*pScr->SwitchMode)(pScr->scrnIndex, mode, 0);
if (Switched) {
pScr->currentMode = mode;
/*
* Adjust frame for new display size.
* Frame is centered around cursor position if cursor is on same screen.
*/
if (pScreen == pCursorScreen)
pScr->frameX0 = px - (mode->HDisplay / 2) + 1;
else
pScr->frameX0 = (pScr->frameX0 + pScr->frameX1 + 1 - mode->HDisplay) / 2;
if (pScr->frameX0 < 0)
pScr->frameX0 = 0;
pScr->frameX1 = pScr->frameX0 + mode->HDisplay - 1;
if (pScr->frameX1 >= pScr->virtualX) {
pScr->frameX0 = pScr->virtualX - mode->HDisplay;
pScr->frameX1 = pScr->virtualX - 1;
}
if (pScreen == pCursorScreen)
pScr->frameY0 = py - (mode->VDisplay / 2) + 1;
else
pScr->frameY0 = (pScr->frameY0 + pScr->frameY1 + 1 - mode->VDisplay) / 2;
if (pScr->frameY0 < 0)
pScr->frameY0 = 0;
pScr->frameY1 = pScr->frameY0 + mode->VDisplay - 1;
if (pScr->frameY1 >= pScr->virtualY) {
pScr->frameY0 = pScr->virtualY - mode->VDisplay;
pScr->frameY1 = pScr->virtualY - 1;
}
}
xf86UnblockSIGIO(was_blocked);
if (pScr->AdjustFrame)
(*pScr->AdjustFrame)(pScr->scrnIndex, pScr->frameX0, pScr->frameY0, 0);
/* The original code centered the frame around the cursor if possible.
* Since this is hard to achieve with multiple cursors, we do the following:
* - center around the first pointer
* - move all other pointers to the nearest edge on the screen (or leave
* them unmodified if they are within the boundaries).
*/
if (pScreen == pCursorScreen)
{
xf86WarpCursor(dev, pScreen, px, py);
}
for (it = inputInfo.devices; it; it = it->next)
{
if (it == dev)
continue;
if (IsPointerDevice(it) && it->spriteInfo->spriteOwner)
{
pCursorScreen = miPointerGetScreen(it);
if (pScreen == pCursorScreen)
{
miPointerGetPosition(it, &px, &py);
if (px < pScr->frameX0)
px = pScr->frameX0;
else if (px > pScr->frameX1)
px = pScr->frameX1;
if(py < pScr->frameY0)
py = pScr->frameY0;
else if(py > pScr->frameY1)
py = pScr->frameY1;
xf86WarpCursor(it, pScreen, px, py);
}
}
}
return Switched;
}