/*
* Inodes in different states need to be treated differently, and the return
* value of xfs_iflush is not sufficient to get this right. The following table
* lists the inode states and the reclaim actions necessary for non-blocking
* reclaim:
*
*
* inode state iflush ret required action
* --------------- ---------- ---------------
* bad - reclaim
* shutdown EIO unpin and reclaim
* clean, unpinned 0 reclaim
* stale, unpinned 0 reclaim
* clean, pinned(*) 0 requeue
* stale, pinned EAGAIN requeue
* dirty, delwri ok 0 requeue
* dirty, delwri blocked EAGAIN requeue
* dirty, sync flush 0 reclaim
*
* (*) dgc: I don't think the clean, pinned state is possible but it gets
* handled anyway given the order of checks implemented.
*
* As can be seen from the table, the return value of xfs_iflush() is not
* sufficient to correctly decide the reclaim action here. The checks in
* xfs_iflush() might look like duplicates, but they are not.
*
* Also, because we get the flush lock first, we know that any inode that has
* been flushed delwri has had the flush completed by the time we check that
* the inode is clean. The clean inode check needs to be done before flushing
* the inode delwri otherwise we would loop forever requeuing clean inodes as
* we cannot tell apart a successful delwri flush and a clean inode from the
* return value of xfs_iflush().
*
* Note that because the inode is flushed delayed write by background
* writeback, the flush lock may already be held here and waiting on it can
* result in very long latencies. Hence for sync reclaims, where we wait on the
* flush lock, the caller should push out delayed write inodes first before
* trying to reclaim them to minimise the amount of time spent waiting. For
* background relaim, we just requeue the inode for the next pass.
*
* Hence the order of actions after gaining the locks should be:
* bad => reclaim
* shutdown => unpin and reclaim
* pinned, delwri => requeue
* pinned, sync => unpin
* stale => reclaim
* clean => reclaim
* dirty, delwri => flush and requeue
* dirty, sync => flush, wait and reclaim
*/
STATIC int
xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
int sync_mode)
{
int error;
restart:
error = 0;
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (!xfs_iflock_nowait(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out;
/*
* If we only have a single dirty inode in a cluster there is
* a fair chance that the AIL push may have pushed it into
* the buffer, but xfsbufd won't touch it until 30 seconds
* from now, and thus we will lock up here.
*
* Promote the inode buffer to the front of the delwri list
* and wake up xfsbufd now.
*/
xfs_promote_inode(ip);
xfs_iflock(ip);
}
if (is_bad_inode(VFS_I(ip)))
goto reclaim;
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_iunpin_wait(ip);
goto reclaim;
}
if (xfs_ipincount(ip)) {
if (!(sync_mode & SYNC_WAIT)) {
xfs_ifunlock(ip);
goto out;
}
xfs_iunpin_wait(ip);
}
if (xfs_iflags_test(ip, XFS_ISTALE))
goto reclaim;
if (xfs_inode_clean(ip))
goto reclaim;
/*
* Now we have an inode that needs flushing.
*
* We do a nonblocking flush here even if we are doing a SYNC_WAIT
* reclaim as we can deadlock with inode cluster removal.
* xfs_ifree_cluster() can lock the inode buffer before it locks the
* ip->i_lock, and we are doing the exact opposite here. As a result,
* doing a blocking xfs_itobp() to get the cluster buffer will result
* in an ABBA deadlock with xfs_ifree_cluster().
*
* As xfs_ifree_cluser() must gather all inodes that are active in the
* cache to mark them stale, if we hit this case we don't actually want
* to do IO here - we want the inode marked stale so we can simply
* reclaim it. Hence if we get an EAGAIN error on a SYNC_WAIT flush,
* just unlock the inode, back off and try again. Hopefully the next
* pass through will see the stale flag set on the inode.
*/
error = xfs_iflush(ip, SYNC_TRYLOCK | sync_mode);
if (sync_mode & SYNC_WAIT) {
if (error == EAGAIN) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/* backoff longer than in xfs_ifree_cluster */
delay(2);
goto restart;
}
xfs_iflock(ip);
goto reclaim;
}
/*
* When we have to flush an inode but don't have SYNC_WAIT set, we
* flush the inode out using a delwri buffer and wait for the next
* call into reclaim to find it in a clean state instead of waiting for
* it now. We also don't return errors here - if the error is transient
* then the next reclaim pass will flush the inode, and if the error
* is permanent then the next sync reclaim will reclaim the inode and
* pass on the error.
*/
if (error && error != EAGAIN && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_warn(ip->i_mount,
"inode 0x%llx background reclaim flush failed with %d",
(long long)ip->i_ino, error);
}
out:
xfs_iflags_clear(ip, XFS_IRECLAIM);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/*
* We could return EAGAIN here to make reclaim rescan the inode tree in
* a short while. However, this just burns CPU time scanning the tree
* waiting for IO to complete and xfssyncd never goes back to the idle
* state. Instead, return 0 to let the next scheduled background reclaim
* attempt to reclaim the inode again.
*/
return 0;
reclaim:
xfs_ifunlock(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
XFS_STATS_INC(xs_ig_reclaims);
/*
* Remove the inode from the per-AG radix tree.
*
* Because radix_tree_delete won't complain even if the item was never
* added to the tree assert that it's been there before to catch
* problems with the inode life time early on.
*/
spin_lock(&pag->pag_ici_lock);
if (!radix_tree_delete(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
ASSERT(0);
__xfs_inode_clear_reclaim(pag, ip);
spin_unlock(&pag->pag_ici_lock);
/*
* Here we do an (almost) spurious inode lock in order to coordinate
* with inode cache radix tree lookups. This is because the lookup
* can reference the inodes in the cache without taking references.
*
* We make that OK here by ensuring that we wait until the inode is
* unlocked after the lookup before we go ahead and free it. We get
* both the ilock and the iolock because the code may need to drop the
* ilock one but will still hold the iolock.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
xfs_inode_free(ip);
return error;
}
STATIC int
xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
int sync_mode)
{
int error;
restart:
error = 0;
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (!xfs_iflock_nowait(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out;
xfs_promote_inode(ip);
xfs_iflock(ip);
}
if (is_bad_inode(VFS_I(ip)))
goto reclaim;
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_iunpin_wait(ip);
goto reclaim;
}
if (xfs_ipincount(ip)) {
if (!(sync_mode & SYNC_WAIT)) {
xfs_ifunlock(ip);
goto out;
}
xfs_iunpin_wait(ip);
}
if (xfs_iflags_test(ip, XFS_ISTALE))
goto reclaim;
if (xfs_inode_clean(ip))
goto reclaim;
error = xfs_iflush(ip, SYNC_TRYLOCK | sync_mode);
if (sync_mode & SYNC_WAIT) {
if (error == EAGAIN) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
delay(2);
goto restart;
}
xfs_iflock(ip);
goto reclaim;
}
if (error && error != EAGAIN && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_warn(ip->i_mount,
"inode 0x%llx background reclaim flush failed with %d",
(long long)ip->i_ino, error);
}
out:
xfs_iflags_clear(ip, XFS_IRECLAIM);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return 0;
reclaim:
xfs_ifunlock(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
XFS_STATS_INC(xs_ig_reclaims);
spin_lock(&pag->pag_ici_lock);
if (!radix_tree_delete(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
ASSERT(0);
__xfs_inode_clear_reclaim(pag, ip);
spin_unlock(&pag->pag_ici_lock);
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
xfs_inode_free(ip);
return error;
}
/*
* Inodes in different states need to be treated differently. The following
* table lists the inode states and the reclaim actions necessary:
*
* inode state iflush ret required action
* --------------- ---------- ---------------
* bad - reclaim
* shutdown EIO unpin and reclaim
* clean, unpinned 0 reclaim
* stale, unpinned 0 reclaim
* clean, pinned(*) 0 requeue
* stale, pinned EAGAIN requeue
* dirty, async - requeue
* dirty, sync 0 reclaim
*
* (*) dgc: I don't think the clean, pinned state is possible but it gets
* handled anyway given the order of checks implemented.
*
* Also, because we get the flush lock first, we know that any inode that has
* been flushed delwri has had the flush completed by the time we check that
* the inode is clean.
*
* Note that because the inode is flushed delayed write by AIL pushing, the
* flush lock may already be held here and waiting on it can result in very
* long latencies. Hence for sync reclaims, where we wait on the flush lock,
* the caller should push the AIL first before trying to reclaim inodes to
* minimise the amount of time spent waiting. For background relaim, we only
* bother to reclaim clean inodes anyway.
*
* Hence the order of actions after gaining the locks should be:
* bad => reclaim
* shutdown => unpin and reclaim
* pinned, async => requeue
* pinned, sync => unpin
* stale => reclaim
* clean => reclaim
* dirty, async => requeue
* dirty, sync => flush, wait and reclaim
*/
STATIC int
xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
int sync_mode)
{
struct xfs_buf *bp = NULL;
xfs_ino_t ino = ip->i_ino; /* for radix_tree_delete */
int error;
restart:
error = 0;
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (!xfs_iflock_nowait(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out;
xfs_iflock(ip);
}
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_iunpin_wait(ip);
/* xfs_iflush_abort() drops the flush lock */
xfs_iflush_abort(ip, false);
goto reclaim;
}
if (xfs_ipincount(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out_ifunlock;
xfs_iunpin_wait(ip);
}
if (xfs_iflags_test(ip, XFS_ISTALE) || xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
goto reclaim;
}
/*
* Never flush out dirty data during non-blocking reclaim, as it would
* just contend with AIL pushing trying to do the same job.
*/
if (!(sync_mode & SYNC_WAIT))
goto out_ifunlock;
/*
* Now we have an inode that needs flushing.
*
* Note that xfs_iflush will never block on the inode buffer lock, as
* xfs_ifree_cluster() can lock the inode buffer before it locks the
* ip->i_lock, and we are doing the exact opposite here. As a result,
* doing a blocking xfs_imap_to_bp() to get the cluster buffer would
* result in an ABBA deadlock with xfs_ifree_cluster().
*
* As xfs_ifree_cluser() must gather all inodes that are active in the
* cache to mark them stale, if we hit this case we don't actually want
* to do IO here - we want the inode marked stale so we can simply
* reclaim it. Hence if we get an EAGAIN error here, just unlock the
* inode, back off and try again. Hopefully the next pass through will
* see the stale flag set on the inode.
*/
error = xfs_iflush(ip, &bp);
if (error == -EAGAIN) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/* backoff longer than in xfs_ifree_cluster */
delay(2);
goto restart;
}
if (!error) {
error = xfs_bwrite(bp);
xfs_buf_relse(bp);
}
reclaim:
ASSERT(!xfs_isiflocked(ip));
/*
* Because we use RCU freeing we need to ensure the inode always appears
* to be reclaimed with an invalid inode number when in the free state.
* We do this as early as possible under the ILOCK so that
* xfs_iflush_cluster() can be guaranteed to detect races with us here.
* By doing this, we guarantee that once xfs_iflush_cluster has locked
* XFS_ILOCK that it will see either a valid, flushable inode that will
* serialise correctly, or it will see a clean (and invalid) inode that
* it can skip.
*/
spin_lock(&ip->i_flags_lock);
ip->i_flags = XFS_IRECLAIM;
ip->i_ino = 0;
spin_unlock(&ip->i_flags_lock);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
XFS_STATS_INC(ip->i_mount, xs_ig_reclaims);
/*
* Remove the inode from the per-AG radix tree.
*
* Because radix_tree_delete won't complain even if the item was never
* added to the tree assert that it's been there before to catch
* problems with the inode life time early on.
*/
spin_lock(&pag->pag_ici_lock);
if (!radix_tree_delete(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ino)))
ASSERT(0);
xfs_perag_clear_reclaim_tag(pag);
spin_unlock(&pag->pag_ici_lock);
/*
* Here we do an (almost) spurious inode lock in order to coordinate
* with inode cache radix tree lookups. This is because the lookup
* can reference the inodes in the cache without taking references.
*
* We make that OK here by ensuring that we wait until the inode is
* unlocked after the lookup before we go ahead and free it.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
__xfs_inode_free(ip);
return error;
out_ifunlock:
xfs_ifunlock(ip);
out:
xfs_iflags_clear(ip, XFS_IRECLAIM);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/*
* We could return -EAGAIN here to make reclaim rescan the inode tree in
* a short while. However, this just burns CPU time scanning the tree
* waiting for IO to complete and the reclaim work never goes back to
* the idle state. Instead, return 0 to let the next scheduled
* background reclaim attempt to reclaim the inode again.
*/
return 0;
}