コード例 #1
0
STATIC int
xfs_reclaim_inode(
	struct xfs_inode	*ip,
	struct xfs_perag	*pag,
	int			sync_mode)
{
	int	error;

restart:
	error = 0;
	xfs_ilock(ip, XFS_ILOCK_EXCL);
	if (!xfs_iflock_nowait(ip)) {
		if (!(sync_mode & SYNC_WAIT))
			goto out;

		xfs_promote_inode(ip);
		xfs_iflock(ip);
	}

	if (is_bad_inode(VFS_I(ip)))
		goto reclaim;
	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
		xfs_iunpin_wait(ip);
		goto reclaim;
	}
	if (xfs_ipincount(ip)) {
		if (!(sync_mode & SYNC_WAIT)) {
			xfs_ifunlock(ip);
			goto out;
		}
		xfs_iunpin_wait(ip);
	}
	if (xfs_iflags_test(ip, XFS_ISTALE))
		goto reclaim;
	if (xfs_inode_clean(ip))
		goto reclaim;

	error = xfs_iflush(ip, SYNC_TRYLOCK | sync_mode);
	if (sync_mode & SYNC_WAIT) {
		if (error == EAGAIN) {
			xfs_iunlock(ip, XFS_ILOCK_EXCL);
			
			delay(2);
			goto restart;
		}
		xfs_iflock(ip);
		goto reclaim;
	}

	if (error && error != EAGAIN && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
		xfs_warn(ip->i_mount,
			"inode 0x%llx background reclaim flush failed with %d",
			(long long)ip->i_ino, error);
	}
out:
	xfs_iflags_clear(ip, XFS_IRECLAIM);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
	return 0;

reclaim:
	xfs_ifunlock(ip);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);

	XFS_STATS_INC(xs_ig_reclaims);
	spin_lock(&pag->pag_ici_lock);
	if (!radix_tree_delete(&pag->pag_ici_root,
				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
		ASSERT(0);
	__xfs_inode_clear_reclaim(pag, ip);
	spin_unlock(&pag->pag_ici_lock);

	xfs_ilock(ip, XFS_ILOCK_EXCL);
	xfs_qm_dqdetach(ip);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);

	xfs_inode_free(ip);

	return error;
}
コード例 #2
0
/*
 * Inodes in different states need to be treated differently, and the return
 * value of xfs_iflush is not sufficient to get this right. The following table
 * lists the inode states and the reclaim actions necessary for non-blocking
 * reclaim:
 *
 *
 *	inode state	     iflush ret		required action
 *      ---------------      ----------         ---------------
 *	bad			-		reclaim
 *	shutdown		EIO		unpin and reclaim
 *	clean, unpinned		0		reclaim
 *	stale, unpinned		0		reclaim
 *	clean, pinned(*)	0		requeue
 *	stale, pinned		EAGAIN		requeue
 *	dirty, delwri ok	0		requeue
 *	dirty, delwri blocked	EAGAIN		requeue
 *	dirty, sync flush	0		reclaim
 *
 * (*) dgc: I don't think the clean, pinned state is possible but it gets
 * handled anyway given the order of checks implemented.
 *
 * As can be seen from the table, the return value of xfs_iflush() is not
 * sufficient to correctly decide the reclaim action here. The checks in
 * xfs_iflush() might look like duplicates, but they are not.
 *
 * Also, because we get the flush lock first, we know that any inode that has
 * been flushed delwri has had the flush completed by the time we check that
 * the inode is clean. The clean inode check needs to be done before flushing
 * the inode delwri otherwise we would loop forever requeuing clean inodes as
 * we cannot tell apart a successful delwri flush and a clean inode from the
 * return value of xfs_iflush().
 *
 * Note that because the inode is flushed delayed write by background
 * writeback, the flush lock may already be held here and waiting on it can
 * result in very long latencies. Hence for sync reclaims, where we wait on the
 * flush lock, the caller should push out delayed write inodes first before
 * trying to reclaim them to minimise the amount of time spent waiting. For
 * background relaim, we just requeue the inode for the next pass.
 *
 * Hence the order of actions after gaining the locks should be:
 *	bad		=> reclaim
 *	shutdown	=> unpin and reclaim
 *	pinned, delwri	=> requeue
 *	pinned, sync	=> unpin
 *	stale		=> reclaim
 *	clean		=> reclaim
 *	dirty, delwri	=> flush and requeue
 *	dirty, sync	=> flush, wait and reclaim
 */
STATIC int
xfs_reclaim_inode(
	struct xfs_inode	*ip,
	struct xfs_perag	*pag,
	int			sync_mode)
{
	int	error;

restart:
	error = 0;
	xfs_ilock(ip, XFS_ILOCK_EXCL);
	if (!xfs_iflock_nowait(ip)) {
		if (!(sync_mode & SYNC_WAIT))
			goto out;

		/*
		 * If we only have a single dirty inode in a cluster there is
		 * a fair chance that the AIL push may have pushed it into
		 * the buffer, but xfsbufd won't touch it until 30 seconds
		 * from now, and thus we will lock up here.
		 *
		 * Promote the inode buffer to the front of the delwri list
		 * and wake up xfsbufd now.
		 */
		xfs_promote_inode(ip);
		xfs_iflock(ip);
	}

	if (is_bad_inode(VFS_I(ip)))
		goto reclaim;
	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
		xfs_iunpin_wait(ip);
		goto reclaim;
	}
	if (xfs_ipincount(ip)) {
		if (!(sync_mode & SYNC_WAIT)) {
			xfs_ifunlock(ip);
			goto out;
		}
		xfs_iunpin_wait(ip);
	}
	if (xfs_iflags_test(ip, XFS_ISTALE))
		goto reclaim;
	if (xfs_inode_clean(ip))
		goto reclaim;

	/*
	 * Now we have an inode that needs flushing.
	 *
	 * We do a nonblocking flush here even if we are doing a SYNC_WAIT
	 * reclaim as we can deadlock with inode cluster removal.
	 * xfs_ifree_cluster() can lock the inode buffer before it locks the
	 * ip->i_lock, and we are doing the exact opposite here. As a result,
	 * doing a blocking xfs_itobp() to get the cluster buffer will result
	 * in an ABBA deadlock with xfs_ifree_cluster().
	 *
	 * As xfs_ifree_cluser() must gather all inodes that are active in the
	 * cache to mark them stale, if we hit this case we don't actually want
	 * to do IO here - we want the inode marked stale so we can simply
	 * reclaim it. Hence if we get an EAGAIN error on a SYNC_WAIT flush,
	 * just unlock the inode, back off and try again. Hopefully the next
	 * pass through will see the stale flag set on the inode.
	 */
	error = xfs_iflush(ip, SYNC_TRYLOCK | sync_mode);
	if (sync_mode & SYNC_WAIT) {
		if (error == EAGAIN) {
			xfs_iunlock(ip, XFS_ILOCK_EXCL);
			/* backoff longer than in xfs_ifree_cluster */
			delay(2);
			goto restart;
		}
		xfs_iflock(ip);
		goto reclaim;
	}

	/*
	 * When we have to flush an inode but don't have SYNC_WAIT set, we
	 * flush the inode out using a delwri buffer and wait for the next
	 * call into reclaim to find it in a clean state instead of waiting for
	 * it now. We also don't return errors here - if the error is transient
	 * then the next reclaim pass will flush the inode, and if the error
	 * is permanent then the next sync reclaim will reclaim the inode and
	 * pass on the error.
	 */
	if (error && error != EAGAIN && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
		xfs_warn(ip->i_mount,
			"inode 0x%llx background reclaim flush failed with %d",
			(long long)ip->i_ino, error);
	}
out:
	xfs_iflags_clear(ip, XFS_IRECLAIM);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
	/*
	 * We could return EAGAIN here to make reclaim rescan the inode tree in
	 * a short while. However, this just burns CPU time scanning the tree
	 * waiting for IO to complete and xfssyncd never goes back to the idle
	 * state. Instead, return 0 to let the next scheduled background reclaim
	 * attempt to reclaim the inode again.
	 */
	return 0;

reclaim:
	xfs_ifunlock(ip);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);

	XFS_STATS_INC(xs_ig_reclaims);
	/*
	 * Remove the inode from the per-AG radix tree.
	 *
	 * Because radix_tree_delete won't complain even if the item was never
	 * added to the tree assert that it's been there before to catch
	 * problems with the inode life time early on.
	 */
	spin_lock(&pag->pag_ici_lock);
	if (!radix_tree_delete(&pag->pag_ici_root,
				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
		ASSERT(0);
	__xfs_inode_clear_reclaim(pag, ip);
	spin_unlock(&pag->pag_ici_lock);

	/*
	 * Here we do an (almost) spurious inode lock in order to coordinate
	 * with inode cache radix tree lookups.  This is because the lookup
	 * can reference the inodes in the cache without taking references.
	 *
	 * We make that OK here by ensuring that we wait until the inode is
	 * unlocked after the lookup before we go ahead and free it.  We get
	 * both the ilock and the iolock because the code may need to drop the
	 * ilock one but will still hold the iolock.
	 */
	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
	xfs_qm_dqdetach(ip);
	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);

	xfs_inode_free(ip);
	return error;

}