static int xhci_try_enable_msi(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev;
int ret;
/* The xhci platform device has set up IRQs through usb_add_hcd. */
if (xhci->quirks & XHCI_PLAT)
return 0;
pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
/*
* Some Fresco Logic host controllers advertise MSI, but fail to
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
free_irq(hcd->irq, hcd);
hcd->irq = 0;
ret = xhci_setup_msix(xhci);
if (ret)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (!ret)
/* hcd->irq is 0, we have MSI */
return 0;
if (!pdev->irq) {
xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
return -EINVAL;
}
legacy_irq:
if (!strlen(hcd->irq_descr))
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
if (ret) {
xhci_err(xhci, "request interrupt %d failed\n",
pdev->irq);
return ret;
}
hcd->irq = pdev->irq;
return 0;
}
void xhci_init_ej188_v00100900(struct xhci_hcd *xhci)
{
int i, error_flag = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u8 reg8 = 0;
for (i = 0; i < CFG_ITEMS_V00100900; i++) {
pci_write_config_byte(pdev, cfg_items_v00100900[i].offset,
cfg_items_v00100900[i].value);
}
for (i = 0; i < MMIO_ITEMS_V00100900; i++) {
xhci_writeb(xhci, mmio_items_v00100900[i].value,
mmio_items_v00100900[i].offset);
}
for (i = 0; i < MMIO_ITEMS_V00100900; i++) {
if ((0x1811 != mmio_items_v00100900[i].offset) && (0 == error_flag)) {
reg8 = xhci_readb(xhci, mmio_items_v00100900[i].offset);
if (reg8 != (u8)mmio_items_v00100900[i].value)
error_flag = 1;
}
}
if (error_flag) {
for (i = 0; i < MMIO_ITEMS_V00100900; i++) {
if (0x1811 != mmio_items_v00100900[i].offset) {
reg8 = xhci_readb(xhci, mmio_items_v00100900[i].offset);
xhci_err(xhci, "%s - @%04x %02x\n",
__func__, mmio_items_v00100900[i].offset, reg8);
}
}
}
}
/* Some SS UMS will be enter polling state after plug in with micro A cable.
* If trigger warm reset, then link can be rescued to U0.
*
* This function copy from hub_port_reset function is USB core.
*/
static int dwc3_link_issue_wa(struct xhci_hcd *xhci)
{
__le32 __iomem **addr;
int delay_time, ret;
u32 pls, val, delay;
addr = dwc3_xhci.xhci->usb3_ports;
val = xhci_readl(dwc3_xhci.xhci, addr[0]);
/* If PORTSC.CCS bit haven't set. We can trigger warm reset
* to double confirm if really have no device or link can't trained to
* U0.
*/
if (!(val & PORT_CONNECT)) {
val |= PORT_WR;
xhci_writel(xhci, val, addr[0]);
xhci_dbg(xhci, "%s: trigger warm reset\n", __func__);
}
/* Waiting warm reset complete. */
for (delay_time = 0; delay_time < 800; delay_time += delay) {
msleep(delay);
val = xhci_readl(dwc3_xhci.xhci, addr[0]);
if (!(val & PORT_RESET))
break;
if (delay_time >= 20)
delay = 200;
}
if (val & PORT_RESET)
xhci_err(xhci, "%s port reset failed!\n", __func__);
return 0;
}
static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
struct usb_device *udev, int *cmd_status)
{
int ret;
struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
switch (*cmd_status) {
case COMP_EINVAL:
dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
"context command.\n");
ret = -EINVAL;
break;
case COMP_EBADSLT:
dev_warn(&udev->dev, "WARN: slot not enabled for"
"evaluate context command.\n");
case COMP_CTX_STATE:
dev_warn(&udev->dev, "WARN: invalid context state for "
"evaluate context command.\n");
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
ret = -EINVAL;
break;
case COMP_SUCCESS:
dev_dbg(&udev->dev, "Successful evaluate context command\n");
ret = 0;
break;
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", *cmd_status);
ret = -EINVAL;
break;
}
return ret;
}
/*
* Set the run bit and wait for the host to be running.
*/
static int xhci_start(struct xhci_hcd *xhci)
{
u32 temp;
int ret;
temp = readl(&xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
temp);
writel(temp, &xhci->op_regs->command);
/*
* Wait for the HCHalted Status bit to be 0 to indicate the host is
* running.
*/
ret = xhci_handshake(&xhci->op_regs->status,
STS_HALT, 0, XHCI_MAX_HALT_USEC);
if (ret == -ETIMEDOUT)
xhci_err(xhci, "Host took too long to start, "
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
if (!ret)
xhci->xhc_state &= ~XHCI_STATE_HALTED;
return ret;
}
/*
* Set up MSI-X
*/
static int xhci_setup_msix(struct xhci_hcd *xhci)
{
int i, ret = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/*
* calculate number of msi-x vectors supported.
* - HCS_MAX_INTRS: the max number of interrupts the host can handle,
* with max number of interrupters based on the xhci HCSPARAMS1.
* - num_online_cpus: maximum msi-x vectors per CPUs core.
* Add additional 1 vector to ensure always available interrupt.
*/
xhci->msix_count = min(num_online_cpus() + 1,
HCS_MAX_INTRS(xhci->hcs_params1));
xhci->msix_entries =
kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
GFP_KERNEL);
if (!xhci->msix_entries) {
xhci_err(xhci, "Failed to allocate MSI-X entries\n");
return -ENOMEM;
}
for (i = 0; i < xhci->msix_count; i++) {
xhci->msix_entries[i].entry = i;
xhci->msix_entries[i].vector = 0;
}
ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count);
if (ret) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Failed to enable MSI-X");
goto free_entries;
}
for (i = 0; i < xhci->msix_count; i++) {
ret = request_irq(xhci->msix_entries[i].vector,
xhci_msi_irq,
0, "xhci_hcd", xhci_to_hcd(xhci));
if (ret)
goto disable_msix;
}
hcd->msix_enabled = 1;
return ret;
disable_msix:
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
xhci_free_irq(xhci);
pci_disable_msix(pdev);
free_entries:
kfree(xhci->msix_entries);
xhci->msix_entries = NULL;
return ret;
}
static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(dev);
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
if (pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
}
/* Fresco Logic confirms: all revisions of this chip do not
* support MSI, even though some of them claim to in their PCI
* capabilities.
*/
xhci->quirks |= XHCI_BROKEN_MSI;
xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
"has broken MSI implementation\n",
pdev->revision);
}
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
xhci->quirks |= XHCI_AMD_0x96_HOST;
/* AMD PLL quirk */
if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
xhci->quirks |= XHCI_AMD_PLL_FIX;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
xhci->quirks |= XHCI_SW_BW_CHECKING;
}
#ifdef MY_ABC_HERE
xhci_vendor = pdev->vendor;
#endif
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
#ifdef MY_ABC_HERE
xhci_err(xhci, "Etron chip found.\n");
#endif
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
}
}
static int xhci_setup_msix(struct xhci_hcd *xhci)
{
int ret;
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
xhci->msix_count = 0;
xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
if (!xhci->msix_entries) {
xhci_err(xhci, "Failed to allocate MSI-X entries\n");
return -ENOMEM;
}
xhci->msix_entries[0].entry = 0;
ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
if (ret) {
xhci_err(xhci, "Failed to enable MSI-X\n");
goto free_entries;
}
ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
"xHCI", xhci_to_hcd(xhci));
if (ret) {
xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
goto disable_msix;
}
xhci_dbg(xhci, "Finished setting up MSI-X\n");
return 0;
disable_msix:
pci_disable_msix(pdev);
free_entries:
kfree(xhci->msix_entries);
xhci->msix_entries = NULL;
return ret;
}
void mtk_xhci_dbg_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int last_ep)
{
int i;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
struct xhci_slot_ctx *slot_ctx;
dma_addr_t dma = ctx->dma;
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
if (ctx->type == XHCI_CTX_TYPE_INPUT) {
struct xhci_input_control_ctx *ctrl_ctx =
xhci_get_input_control_ctx(xhci, ctx);
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
&ctrl_ctx->drop_flags, (unsigned long long)dma,
ctrl_ctx->drop_flags);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
&ctrl_ctx->add_flags, (unsigned long long)dma,
ctrl_ctx->add_flags);
dma += field_size;
for (i = 0; i < 6; ++i) {
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
&ctrl_ctx->rsvd2[i], (unsigned long long)dma,
ctrl_ctx->rsvd2[i], i);
dma += field_size;
}
if (csz)
dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
}
slot_ctx = xhci_get_slot_ctx(xhci, ctx);
mtk_xhci_dbg_slot_ctx(xhci, ctx);
mtk_xhci_dbg_ep_ctx(xhci, ctx, last_ep);
}
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
unsigned long flags;
int timeleft;
int ret;
spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
return 0;
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
USB_CTRL_SET_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for a slot\n",
timeleft == 0 ? "Timeout" : "Signal");
return 0;
}
if (!xhci->slot_id) {
xhci_err(xhci, "Error while assigning device slot ID\n");
return 0;
}
if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
spin_lock_irqsave(&xhci->lock, flags);
if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
}
udev->slot_id = xhci->slot_id;
return 1;
}
static int xhci_exit_test_mode(struct xhci_hcd *xhci)
{
int retval;
if (!xhci->test_mode) {
xhci_err(xhci, "Not in test mode, do nothing.\n");
return 0;
}
if (xhci->test_mode == TEST_FORCE_EN &&
!(xhci->xhc_state & XHCI_STATE_HALTED)) {
retval = xhci_halt(xhci);
if (retval)
return retval;
}
pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
xhci->test_mode = 0;
return xhci_reset(xhci);
}
static int xhci_enter_test_mode(struct xhci_hcd *xhci,
u16 test_mode, u16 wIndex, unsigned long *flags)
{
int i, retval;
/* Disable all Device Slots */
xhci_dbg(xhci, "Disable all slots\n");
spin_unlock_irqrestore(&xhci->lock, *flags);
for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
if (!xhci->devs[i])
continue;
retval = xhci_disable_slot(xhci, i);
if (retval)
xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
i, retval);
}
spin_lock_irqsave(&xhci->lock, *flags);
/* Put all ports to the Disable state by clear PP */
xhci_dbg(xhci, "Disable all port (PP = 0)\n");
/* Power off USB3 ports*/
for (i = 0; i < xhci->num_usb3_ports; i++)
xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags);
/* Power off USB2 ports*/
for (i = 0; i < xhci->num_usb2_ports; i++)
xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags);
/* Stop the controller */
xhci_dbg(xhci, "Stop controller\n");
retval = xhci_halt(xhci);
if (retval)
return retval;
/* Disable runtime PM for test mode */
pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller);
/* Set PORTPMSC.PTC field to enter selected test mode */
/* Port is selected by wIndex. port_id = wIndex + 1 */
xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
test_mode, wIndex + 1);
xhci_port_set_test_mode(xhci, test_mode, wIndex);
return retval;
}
void mtk_xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int last_ep)
{
int i, j;
int last_ep_ctx = 31;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
if (last_ep < 31)
last_ep_ctx = last_ep + 1;
for (i = 0; i < last_ep_ctx; ++i) {
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
dma_addr_t dma = ctx->dma +
((unsigned long)ep_ctx - (unsigned long)ctx->bytes);
xhci_err(xhci, "Endpoint %02d Context:\n", i);
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
&ep_ctx->ep_info,
(unsigned long long)dma, ep_ctx->ep_info);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
&ep_ctx->ep_info2,
(unsigned long long)dma, ep_ctx->ep_info2);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
&ep_ctx->deq,
(unsigned long long)dma, ep_ctx->deq);
dma += 2*field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
&ep_ctx->tx_info,
(unsigned long long)dma, ep_ctx->tx_info);
dma += field_size;
for (j = 0; j < 3; ++j) {
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
&ep_ctx->reserved[j],
(unsigned long long)dma,
ep_ctx->reserved[j], j);
dma += field_size;
}
if (csz)
dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
}
}
static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
struct usb_device *udev, int *cmd_status)
{
int ret;
switch (*cmd_status) {
case COMP_ENOMEM:
dev_warn(&udev->dev, "Not enough host controller resources "
"for new device state.\n");
ret = -ENOMEM;
break;
case COMP_BW_ERR:
dev_warn(&udev->dev, "Not enough bandwidth "
"for new device state.\n");
ret = -ENOSPC;
break;
case COMP_TRB_ERR:
dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
"add flag = 1, "
"and endpoint is not disabled.\n");
ret = -EINVAL;
break;
case COMP_SUCCESS:
dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
ret = 0;
break;
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", *cmd_status);
ret = -EINVAL;
break;
}
return ret;
}
void mtk_xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
{
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
int i;
struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
dma_addr_t dma = ctx->dma +
((unsigned long)slot_ctx - (unsigned long)ctx->bytes);
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
xhci_err(xhci, "Slot Context:\n");
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
&slot_ctx->dev_info,
(unsigned long long)dma, slot_ctx->dev_info);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
&slot_ctx->dev_info2,
(unsigned long long)dma, slot_ctx->dev_info2);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
&slot_ctx->tt_info,
(unsigned long long)dma, slot_ctx->tt_info);
dma += field_size;
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
&slot_ctx->dev_state,
(unsigned long long)dma, slot_ctx->dev_state);
dma += field_size;
for (i = 0; i < 4; ++i) {
xhci_err(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
&slot_ctx->reserved[i], (unsigned long long)dma,
slot_ctx->reserved[i], i);
dma += field_size;
}
if (csz)
dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
}
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, max_portpmsc;
unsigned long flags;
u32 temp, status;
int retval = 0;
__le32 __iomem **port_array;
__le32 __iomem **portpmsc_array;
int slot_id;
struct xhci_bus_state *bus_state;
u16 link_state = 0;
u16 wake_mask = 0;
u8 selector;
max_ports = xhci_get_ports(hcd, &port_array);
max_portpmsc = xhci_get_portpmsc(hcd, &portpmsc_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
spin_lock_irqsave(&xhci->lock, flags);
switch (typeReq) {
case GetHubStatus:
/* No power source, over-current reported per port */
memset(buf, 0, 4);
break;
case GetHubDescriptor:
/* Check to make sure userspace is asking for the USB 3.0 hub
* descriptor for the USB 3.0 roothub. If not, we stall the
* endpoint, like external hubs do.
*/
if (hcd->speed == HCD_USB3 &&
(wLength < USB_DT_SS_HUB_SIZE ||
wValue != (USB_DT_SS_HUB << 8))) {
xhci_dbg(xhci, "Wrong hub descriptor type for "
"USB 3.0 roothub.\n");
goto error;
}
xhci_hub_descriptor(hcd, xhci,
(struct usb_hub_descriptor *) buf);
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
if ((wValue & 0xff00) != (USB_DT_BOS << 8))
goto error;
if (hcd->speed != HCD_USB3)
goto error;
memcpy(buf, &usb_bos_descriptor,
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
buf[12] = HCS_U1_LATENCY(temp);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
spin_unlock_irqrestore(&xhci->lock, flags);
return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
case GetPortStatus:
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
status = 0;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
/* wPortChange bits */
if (temp & PORT_CSC)
status |= USB_PORT_STAT_C_CONNECTION << 16;
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC))
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
if ((temp & PORT_RC))
status |= USB_PORT_STAT_C_RESET << 16;
/* USB3.0 only */
if (hcd->speed == HCD_USB3) {
if ((temp & PORT_PLC))
status |= USB_PORT_STAT_C_LINK_STATE << 16;
if ((temp & PORT_WRC))
status |= USB_PORT_STAT_C_BH_RESET << 16;
if ((temp & PORT_CEC))
status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
}
if (hcd->speed != HCD_USB3) {
if ((temp & PORT_PLS_MASK) == XDEV_U3
&& (temp & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
}
if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
!DEV_SUPERSPEED(temp)) {
if ((temp & PORT_RESET) || !(temp & PORT_PE))
goto error;
if (time_after_eq(jiffies,
bus_state->resume_done[wIndex])) {
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
clear_bit(wIndex, &bus_state->resuming_ports);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
xhci_dbg(xhci, "set port %d resume\n",
wIndex + 1);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
}
xhci_ring_device(xhci, slot_id);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
} else {
/*
* The resume has been signaling for less than
* 20ms. Report the port status as SUSPEND,
* let the usbcore check port status again
* and clear resume signaling later.
*/
status |= USB_PORT_STAT_SUSPEND;
}
}
if ((temp & PORT_PLS_MASK) == XDEV_U0
&& (temp & PORT_POWER)
&& (bus_state->suspended_ports & (1 << wIndex))) {
bus_state->suspended_ports &= ~(1 << wIndex);
if (hcd->speed != HCD_USB3)
bus_state->port_c_suspend |= 1 << wIndex;
}
if (temp & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
status |= xhci_port_speed(temp);
}
if (temp & PORT_PE)
status |= USB_PORT_STAT_ENABLE;
if (temp & PORT_OC)
status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER) {
if (hcd->speed == HCD_USB3)
status |= USB_SS_PORT_STAT_POWER;
else
status |= USB_PORT_STAT_POWER;
}
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(xhci, &status, temp);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
*/
xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
case SetPortFeature:
selector = wIndex >> 8;
if (wValue == USB_PORT_FEAT_LINK_STATE)
link_state = (wIndex & 0xff00) >> 3;
if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
wake_mask = wIndex & 0xff00;
wIndex &= 0xff;
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
temp = xhci_port_state_to_neutral(temp);
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10);
spin_lock_irqsave(&xhci->lock, flags);
}
/* In spec software should not attempt to suspend
* a port unless the port reports that it is in the
* enabled (PED = ??1??,PLS < ??3??) state.
*/
temp = xhci_readl(xhci, port_array[wIndex]);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending device "
"not in U0/U1/U2.\n");
goto error;
}
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_warn(xhci, "slot_id is zero\n");
goto error;
}
/* unlock to execute stop endpoint commands */
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
temp = xhci_readl(xhci, port_array[wIndex]);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d\n", wIndex);
temp = xhci_port_state_to_neutral(temp);
/*
* Clear all change bits, so that we get a new
* connection event.
*/
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
xhci_writel(xhci, temp | PORT_PE,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Put link in RxDetect (enable port) */
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
xhci_dbg(xhci, "Enable port %d\n", wIndex);
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Software should not attempt to set
* port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
(link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
if (link_state == USB_SS_PORT_LS_U3) {
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (slot_id) {
/* unlock to execute stop endpoint
* commands */
spin_unlock_irqrestore(&xhci->lock,
flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
}
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
temp = xhci_readl(xhci, port_array[wIndex]);
if (link_state == USB_SS_PORT_LS_U3)
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_POWER:
/*
* Turn on ports, even if there isn't per-port switching.
* HC will report connect events even before this is set.
* However, khubd will ignore the roothub events until
* the roothub is registered.
*/
xhci_writel(xhci, temp | PORT_POWER,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
xhci_writel(xhci, temp, port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
/*
* For downstream facing ports (these): one hub port is put
* into test mode according to USB2 11.24.2.13, then the hub
* must be reset (which for root hub now means rmmod+modprobe,
* or else system reboot). See EHCI 2.3.9 and 4.14 for info
* about the EHCI-specific stuff.
*/
case USB_PORT_FEAT_TEST:
#ifdef CONFIG_HOST_COMPLIANT_TEST
retval = xhci_port_test(hcd, selector, wIndex, flags);
if (retval < 0) {
xhci_err(xhci, "USB2 Host Test Fail!!!\n");
goto error;
}
#endif
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port_array,
wIndex, wake_mask);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port remote wake mask, "
"actual port %d status = 0x%x\n",
wIndex, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
xhci_writel(xhci, temp, port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
default:
goto error;
}
/* unblock any posted writes */
temp = xhci_readl(xhci, port_array[wIndex]);
break;
case ClearPortFeature:
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
/* FIXME: What new port features do we need to support? */
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
goto error;
if ((temp & PORT_PLS_MASK) == XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
}
bus_state->port_c_suspend |= 1 << wIndex;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
}
xhci_ring_device(xhci, slot_id);
break;
case USB_PORT_FEAT_C_SUSPEND:
bus_state->port_c_suspend &= ~(1 << wIndex);
case USB_PORT_FEAT_C_RESET:
case USB_PORT_FEAT_C_BH_PORT_RESET:
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_OVER_CURRENT:
case USB_PORT_FEAT_C_ENABLE:
case USB_PORT_FEAT_C_PORT_LINK_STATE:
case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
xhci_clear_port_change_bit(xhci, wValue, wIndex,
port_array[wIndex], temp);
break;
case USB_PORT_FEAT_ENABLE:
xhci_disable_port(hcd, xhci, wIndex,
port_array[wIndex], temp);
break;
default:
goto error;
}
break;
default:
error:
/* "stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
}
static int xhci_port_test(struct usb_hcd *hcd, u8 selector, u8 port,
unsigned long flags)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_portpmsc;
__le32 __iomem **portpmsc_array;
u32 temp;
int retval = 0;
xhci_info(xhci, "TEST MODE !!! selector = 0x%x\n", selector);
xhci_info(xhci, "running XHCI test %x on port %x\n", selector, port);
max_portpmsc = xhci_get_portpmsc(hcd, &portpmsc_array);
temp = xhci_readl(xhci, portpmsc_array[port]);
temp &= ~PORT_TEST(0xf);
xhci_writel(xhci, temp, portpmsc_array[port]);
switch (selector) {
case USB_PORT_TEST_J:
xhci_info(xhci, "Port Test J State\n");
/*
* For J/K/SE0_NAK/TEST_PACKET/FORCE_ENABLE
* 1. Set the Run/Stop bit in the USBCMD register
* to a '0' and wait for the HCHalted bit
* in the USBSTS regster, to transitio to a '1'
* 2. Set the Port Test Control field in the port
* under test PORTPMSC register
*/
retval = xhci_halt(xhci);
if (retval < 0)
goto error;
temp = xhci_readl(xhci, portpmsc_array[port]);
temp |= PORT_TEST_J;
xhci_writel(xhci, temp, portpmsc_array[port]);
break;
case USB_PORT_TEST_K:
xhci_info(xhci, "Port Test K State\n");
retval = xhci_halt(xhci);
if (retval < 0)
goto error;
temp = xhci_readl(xhci, portpmsc_array[port]);
temp |= PORT_TEST_K;
xhci_writel(xhci, temp, portpmsc_array[port]);
break;
case USB_PORT_TEST_SE0_NAK:
xhci_info(xhci, "Port Test SE0_NAK\n");
retval = xhci_halt(xhci);
if (retval < 0)
goto error;
temp = xhci_readl(xhci, portpmsc_array[port]);
temp |= PORT_TEST_SE0_NAK;
xhci_writel(xhci, temp, portpmsc_array[port]);
break;
case USB_PORT_TEST_PACKET:
xhci_info(xhci, "Port Test Packet\n");
retval = xhci_halt(xhci);
if (retval < 0)
goto error;
temp = xhci_readl(xhci, portpmsc_array[port]);
temp |= PORT_TEST_PKT;
xhci_writel(xhci, temp, portpmsc_array[port]);
break;
case USB_PORT_TEST_FORCE_ENABLE:
xhci_info(xhci, "Port Test Force Enable\n");
retval = xhci_halt(xhci);
if (retval < 0)
goto error;
temp = xhci_readl(xhci, portpmsc_array[port]);
temp |= PORT_TEST_FORCE;
xhci_writel(xhci, temp, portpmsc_array[port]);
break;
case (EHSET_HS_HOST_PORT_SUSPEND_RESUME & 0xFF):
xhci_info(xhci, "HS Host Port Suspend Resume\n");
spin_unlock_irqrestore(&xhci->lock, flags);
retval = hs_host_port_suspend_resume(hcd, port);
spin_lock_irqsave(&xhci->lock, flags);
if (retval < 0)
goto error;
break;
case (EHSET_SINGLE_STEP_GET_DEV_DESC & 0xFF):
xhci_info(xhci, "EHSET Single Step Get Device Descriptor\n");
spin_unlock_irqrestore(&xhci->lock, flags);
retval = single_step_get_dev_desc(hcd, port);
spin_lock_irqsave(&xhci->lock, flags);
if (retval < 0)
goto error;
break;
case (EHSET_SINGLE_STEP_SET_FEATURE & 0xFF):
xhci_info(xhci, "EHSET Single Step Get Device Descriptor\n");
spin_unlock_irqrestore(&xhci->lock, flags);
retval = single_step_set_feature(hcd, port);
spin_lock_irqsave(&xhci->lock, flags);
if (retval < 0)
goto error;
break;
default:
xhci_err(xhci, "Unknown Test Mode : %d\n", selector);
retval = -EINVAL;
goto error;
}
temp = xhci_readl(xhci, portpmsc_array[port]);
xhci_info(xhci, "PORTPMSC: actual port %d status & control = 0x%x\n",
port, temp);
xhci_info(xhci, "USB2.0 Port Test Done !!!\n");
return retval;
error:
xhci_err(xhci, "USB2.0 Port Test Error : %d\n", retval);
return retval;
}
static int single_step_get_dev_desc(struct usb_hcd *hcd, u8 port)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct urb *urb;
struct usb_device *hdev;
struct usb_device *udev = NULL;
struct usb_hub *hub = NULL;
struct usb_ctrlrequest setup_packet;
char data_buffer[USB_DT_DEVICE_SIZE];
int ret = 0;
xhci_info(xhci, "Testing SINGLE_STEP_GET_DEV_DESC\n");
hdev = hcd->self.root_hub;
if (!hdev) {
xhci_err(xhci, "EHSET: root_hub pointer is NULL\n");
ret = -EPIPE;
goto error;
}
hub = usb_hub_to_struct_hub(hdev);
if (hub == NULL) {
xhci_err(xhci, "EHSET: hub pointer is NULL\n");
ret = -EPIPE;
goto error;
}
if (hub->ports[port]->child != NULL)
udev = hub->ports[port]->child;
if (!udev) {
xhci_err(xhci, "EHSET: device available is NOT found\n");
ret = -EPIPE;
goto error;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
xhci_err(xhci, "urb : get alloc failed\n");
ret = -ENOMEM;
goto error;
}
setup_packet.bRequestType = USB_DIR_IN |
USB_TYPE_STANDARD | USB_RECIP_DEVICE;
setup_packet.bRequest = USB_REQ_GET_DESCRIPTOR;
setup_packet.wValue = (USB_DT_DEVICE << 8);
setup_packet.wIndex = 0;
setup_packet.wLength = USB_DT_DEVICE_SIZE;
urb->dev = udev;
urb->hcpriv = udev->ep0.hcpriv;
urb->setup_packet = (unsigned char *)&setup_packet;
urb->transfer_buffer = data_buffer;
urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
urb->actual_length = 0;
urb->transfer_flags = URB_DIR_IN | URB_HCD_DRIVER_TEST;
urb->pipe = usb_rcvctrlpipe(udev, 0);
urb->ep = usb_pipe_endpoint(udev, urb->pipe);
if (!urb->ep) {
xhci_err(xhci, "urb->ep is NULL\n");
ret = -ENOENT;
goto error_urb_ep;
}
urb->setup_dma = dma_map_single(
hcd->self.controller,
urb->setup_packet,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
if (dma_mapping_error(hcd->self.controller, urb->setup_dma)) {
xhci_err(xhci, "setup : dma_map_single failed\n");
ret = -EBUSY;
goto error_setup_dma;
}
urb->transfer_dma = dma_map_single(
hcd->self.controller,
urb->transfer_buffer,
urb->transfer_buffer_length,
DMA_TO_DEVICE);
if (dma_mapping_error(hcd->self.controller, urb->transfer_dma)) {
xhci_err(xhci, "xfer : dma_map_single failed\n");
ret = -EBUSY;
goto error_xfer_dma;
}
ret = xhci_urb_enqueue_single_step(hcd, urb, GFP_ATOMIC, 1);
dma_unmap_single(hcd->self.controller, urb->transfer_dma,
sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE);
error_xfer_dma:
dma_unmap_single(hcd->self.controller, urb->setup_dma,
sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE);
error_setup_dma:
error_urb_ep:
usb_free_urb(urb);
error:
return ret;
}
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
{
unsigned long flags;
int timeleft;
struct xhci_virt_device *virt_dev;
int ret = 0;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u64 temp_64;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
return -EINVAL;
}
virt_dev = xhci->devs[udev->slot_id];
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
return ret;
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
USB_CTRL_SET_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for a slot\n",
timeleft == 0 ? "Timeout" : "Signal");
return -ETIME;
}
switch (virt_dev->cmd_status) {
case COMP_CTX_STATE:
case COMP_EBADSLT:
xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
udev->slot_id);
ret = -EINVAL;
break;
case COMP_TX_ERR:
dev_warn(&udev->dev, "Device not responding to set address.\n");
ret = -EPROTO;
break;
case COMP_SUCCESS:
xhci_dbg(xhci, "Successful Address Device command\n");
break;
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", virt_dev->cmd_status);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
ret = -EINVAL;
break;
}
if (ret) {
return ret;
}
temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
udev->slot_id,
&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
(unsigned long long)
xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
(unsigned long long)virt_dev->out_ctx->dma);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx->add_flags = 0;
ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
set_bit(udev->devnum, udev->bus->devmap.devicemap);
return 0;
}
/*
* This function implements the USB_PORT_FEAT_TEST handling of the
* SINGLE_STEP_SET_FEATURE test mode as defined in the Embedded
* High-Speed Electrical Test (EHSET) specification. This simply
* issues a GetDescriptor control transfer, with an inserted 15-second
* delay after the end of the SETUP stage and before the IN token of
* the DATA stage is set. The idea is that this gives the test operator
* enough time to configure the oscilloscope to perform a measurement
* of the response time between the DATA and ACK packets that follow.
*/
static int xhci_ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
{
int retval = -ENOMEM;
struct usb_ctrlrequest *dr;
struct urb *urb;
struct usb_device *udev;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct usb_device_descriptor *buf;
unsigned long flags;
DECLARE_COMPLETION_ONSTACK(done);
/* Obtain udev of the rhub's child port */
udev = usb_hub_find_child(hcd->self.root_hub, port);
if (!udev) {
xhci_err(xhci, "No device attached to the RootHub\n");
return -ENODEV;
}
buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
if (!dr) {
kfree(buf);
return -ENOMEM;
}
/* Fill Setup packet for GetDescriptor */
dr->bRequestType = USB_DIR_IN;
dr->bRequest = USB_REQ_GET_DESCRIPTOR;
dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
dr->wIndex = 0;
dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
urb = xhci_request_single_step_set_feature_urb(udev, dr, buf, &done);
if (!urb)
goto cleanup;
/* Now complete just the SETUP stage */
spin_lock_irqsave(&xhci->lock, flags);
retval = xhci_submit_single_step_set_feature(hcd, urb, 1);
spin_unlock_irqrestore(&xhci->lock, flags);
if (retval)
goto out1;
if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
usb_kill_urb(urb);
retval = -ETIMEDOUT;
xhci_err(xhci, "%s SETUP stage timed out on ep0\n", __func__);
goto out1;
}
/* Sleep for 15 seconds; HC will send SOFs during this period */
msleep(15 * 1000);
/* Complete remaining DATA and status stages. Re-use same URB */
urb->status = -EINPROGRESS;
usb_get_urb(urb);
atomic_inc(&urb->use_count);
atomic_inc(&urb->dev->urbnum);
spin_lock_irqsave(&xhci->lock, flags);
retval = xhci_submit_single_step_set_feature(hcd, urb, 0);
spin_unlock_irqrestore(&xhci->lock, flags);
if (!retval && !wait_for_completion_timeout(&done,
msecs_to_jiffies(2000))) {
usb_kill_urb(urb);
retval = -ETIMEDOUT;
xhci_err(xhci, "%s IN stage timed out on ep0\n", __func__);
}
out1:
usb_free_urb(urb);
cleanup:
kfree(dr);
kfree(buf);
return retval;
}
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
unsigned long flags;
u32 temp, status;
int retval = 0;
__le32 __iomem **port_array;
int slot_id;
struct xhci_bus_state *bus_state;
u16 link_state = 0;
u16 wake_mask = 0;
u32 __iomem *status_reg = NULL;
u32 i, command, num_ports, selector;
max_ports = xhci_get_ports(hcd, &port_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
spin_lock_irqsave(&xhci->lock, flags);
switch (typeReq) {
case GetHubStatus:
/* No power source, over-current reported per port */
memset(buf, 0, 4);
break;
case GetHubDescriptor:
/* Check to make sure userspace is asking for the USB 3.0 hub
* descriptor for the USB 3.0 roothub. If not, we stall the
* endpoint, like external hubs do.
*/
if (hcd->speed == HCD_USB3 &&
(wLength < USB_DT_SS_HUB_SIZE ||
wValue != (USB_DT_SS_HUB << 8))) {
xhci_dbg(xhci, "Wrong hub descriptor type for "
"USB 3.0 roothub.\n");
goto error;
}
xhci_hub_descriptor(hcd, xhci,
(struct usb_hub_descriptor *) buf);
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
if ((wValue & 0xff00) != (USB_DT_BOS << 8))
goto error;
if (hcd->speed != HCD_USB3)
goto error;
memcpy(buf, &usb_bos_descriptor,
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
buf[12] = HCS_U1_LATENCY(temp);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
spin_unlock_irqrestore(&xhci->lock, flags);
return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
case GetPortStatus:
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
status = 0;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
/* wPortChange bits */
if (temp & PORT_CSC)
status |= USB_PORT_STAT_C_CONNECTION << 16;
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC))
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
if ((temp & PORT_RC))
status |= USB_PORT_STAT_C_RESET << 16;
/* USB3.0 only */
if (hcd->speed == HCD_USB3) {
if ((temp & PORT_PLC))
status |= USB_PORT_STAT_C_LINK_STATE << 16;
if ((temp & PORT_WRC))
status |= USB_PORT_STAT_C_BH_RESET << 16;
}
if (hcd->speed != HCD_USB3) {
if ((temp & PORT_PLS_MASK) == XDEV_U3
&& (temp & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
}
if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
!DEV_SUPERSPEED(temp)) {
if ((temp & PORT_RESET) || !(temp & PORT_PE))
goto error;
if (time_after_eq(jiffies,
bus_state->resume_done[wIndex])) {
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
clear_bit(wIndex, &bus_state->resuming_ports);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
xhci_dbg(xhci, "set port %d resume\n",
wIndex + 1);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
}
xhci_ring_device(xhci, slot_id);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
} else {
/*
* The resume has been signaling for less than
* 20ms. Report the port status as SUSPEND,
* let the usbcore check port status again
* and clear resume signaling later.
*/
status |= USB_PORT_STAT_SUSPEND;
}
}
if ((temp & PORT_PLS_MASK) == XDEV_U0
&& (temp & PORT_POWER)
&& (bus_state->suspended_ports & (1 << wIndex))) {
bus_state->suspended_ports &= ~(1 << wIndex);
if (hcd->speed != HCD_USB3)
bus_state->port_c_suspend |= 1 << wIndex;
}
if (temp & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
status |= xhci_port_speed(temp);
}
if (temp & PORT_PE)
status |= USB_PORT_STAT_ENABLE;
if (temp & PORT_OC)
status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER) {
if (hcd->speed == HCD_USB3)
status |= USB_SS_PORT_STAT_POWER;
else
status |= USB_PORT_STAT_POWER;
}
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
*/
xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
case SetPortFeature:
if (wValue == USB_PORT_FEAT_LINK_STATE)
link_state = (wIndex & 0xff00) >> 3;
if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
wake_mask = wIndex & 0xff00;
selector = wIndex >> 8;
wIndex &= 0xff;
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
status_reg = &xhci->op_regs->port_power_base +
NUM_PORT_REGS*wIndex;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
temp = xhci_port_state_to_neutral(temp);
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10);
spin_lock_irqsave(&xhci->lock, flags);
}
/* In spec software should not attempt to suspend
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
temp = xhci_readl(xhci, port_array[wIndex]);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending device "
"not in U0/U1/U2.\n");
goto error;
}
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_warn(xhci, "slot_id is zero\n");
goto error;
}
/* unlock to execute stop endpoint commands */
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
temp = xhci_readl(xhci, port_array[wIndex]);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d\n", wIndex);
temp = xhci_port_state_to_neutral(temp);
/*
* Clear all change bits, so that we get a new
* connection event.
*/
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
xhci_writel(xhci, temp | PORT_PE,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Put link in RxDetect (enable port) */
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
xhci_dbg(xhci, "Enable port %d\n", wIndex);
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Software should not attempt to set
* port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
(link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
if (link_state == USB_SS_PORT_LS_U3) {
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (slot_id) {
/* unlock to execute stop endpoint
* commands */
spin_unlock_irqrestore(&xhci->lock,
flags);
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
}
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
temp = xhci_readl(xhci, port_array[wIndex]);
if (link_state == USB_SS_PORT_LS_U3)
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_POWER:
/* FIXME Do not turn on BYT XHCI port 6 power,
* Disable this port's power to disable HSIC hub
*/
if ((xhci->quirks & XHCI_PORT_DISABLE_QUIRK) &&
(wIndex == 5)) {
temp = xhci_readl(xhci, port_array[wIndex]);
temp &= ~PORT_POWER;
xhci_writel(xhci, temp, port_array[wIndex]);
break;
}
/*
* Turn on ports, even if there isn't per-port switching.
* HC will report connect events even before this is set.
* However, khubd will ignore the roothub events until
* the roothub is registered.
*/
xhci_writel(xhci, temp | PORT_POWER,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
xhci_writel(xhci, temp, port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port_array,
wIndex, wake_mask);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port remote wake mask, "
"actual port %d status = 0x%x\n",
wIndex, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
xhci_writel(xhci, temp, port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
case USB_PORT_FEAT_TEST:
if (!selector || selector >= 5 || !status_reg)
goto error;
/*
* Disable all Device Slots.
*/
for (i = 0; i < MAX_HC_SLOTS; i++) {
if (xhci->dcbaa->dev_context_ptrs[i]) {
if (xhci_queue_slot_control(xhci,
TRB_DISABLE_SLOT, i)) {
xhci_err(xhci,
"Disable slot[%d] failed!\n",
i);
goto error;
}
xhci_dbg(xhci, "Disable Slot[%d].\n", i);
}
}
/*
* All ports shall be in the Disable state (PP = 0)
*/
xhci_dbg(xhci, "Disable all port (PP = 0)\n");
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
u32 __iomem *sreg =
&xhci->op_regs->port_status_base +
NUM_PORT_REGS*i;
temp = xhci_readl(xhci, sreg);
temp &= ~PORT_POWER;
xhci_writel(xhci, temp, sreg);
}
/* Set the Run/Stop (R/S) bit in the USBCMD
* register to a '0' and wait for HCHalted(HCH) bit
* in the USBSTS register, to transition to a '1'.
*/
xhci_dbg(xhci, "Stop controller\n");
command = xhci_readl(xhci, &xhci->op_regs->command);
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
STS_HALT, STS_HALT, 100*100)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
return -ETIMEDOUT;
}
/*
* start to test
*/
xhci_dbg(xhci, "test case:");
switch (selector) {
case 1:
xhci_dbg(xhci, "TEST_J\n");
break;
case 2:
xhci_dbg(xhci, "TEST_K\n");
break;
case 3:
xhci_dbg(xhci, "TEST_SE0_NAK\n");
break;
case 4:
xhci_dbg(xhci, "TEST_PACKET\n");
break;
default:
xhci_dbg(xhci, "Invalide test case!\n");
goto error;
}
temp = xhci_readl(xhci, status_reg);
temp |= selector << 28;
xhci_writel(xhci, temp, status_reg);
break;
default:
goto error;
}
/* unblock any posted writes */
temp = xhci_readl(xhci, port_array[wIndex]);
break;
case ClearPortFeature:
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
/* FIXME: What new port features do we need to support? */
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
goto error;
if ((temp & PORT_PLS_MASK) == XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
}
bus_state->port_c_suspend |= 1 << wIndex;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
}
xhci_ring_device(xhci, slot_id);
break;
case USB_PORT_FEAT_POWER:
/*
* Turn off ports even if there isn't per-port
* swithing. HC will report connect events even
* before this is set. However, khubd will ignore
* the roothub events until the roothub is registered.
*/
xhci_writel(xhci, temp & ~PORT_POWER,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "clear PP, port %d status = 0x%x\n",
wIndex, temp);
break;
case USB_PORT_FEAT_C_SUSPEND:
bus_state->port_c_suspend &= ~(1 << wIndex);
case USB_PORT_FEAT_C_RESET:
case USB_PORT_FEAT_C_BH_PORT_RESET:
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_OVER_CURRENT:
case USB_PORT_FEAT_C_ENABLE:
case USB_PORT_FEAT_C_PORT_LINK_STATE:
xhci_clear_port_change_bit(xhci, wValue, wIndex,
port_array[wIndex], temp);
break;
case USB_PORT_FEAT_ENABLE:
xhci_disable_port(hcd, xhci, wIndex,
port_array[wIndex], temp);
break;
default:
goto error;
}
break;
default:
error:
/* "stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
}
