/*
* Poll power-management related GPIO inputs, update battery life
* in softc, and/or control battery charging.
*/
void
zapm_poll(void *v)
{
struct zapm_softc *sc = v;
int ac_on;
int bc_lock;
int charging;
int volt;
int s;
s = splhigh();
/* Check positition of battery compartment lock switch. */
bc_lock = pxa2x0_gpio_get_bit(GPIO_BATT_COVER_C3000) ? 1 : 0;
/* Stop discharging. */
if (sc->sc_discharging) {
sc->sc_discharging = 0;
volt = zapm_batt_volt();
ac_on = zapm_ac_on();
charging = 0;
DPRINTF(("zapm_poll: discharge off volt %d\n", volt));
} else {
ac_on = zapm_ac_on();
charging = sc->sc_charging;
volt = sc->sc_batt_volt;
}
/* Start or stop charging as necessary. */
if (ac_on && bc_lock) {
if (charging) {
if (zapm_charge_complete(sc)) {
DPRINTF(("zapm_poll: batt full\n"));
charging = 0;
zapm_enable_charging(sc, 0);
}
} else if (!zapm_charge_complete(sc)) {
charging = 1;
volt = zapm_batt_volt();
zapm_enable_charging(sc, 1);
DPRINTF(("zapm_poll: start charging volt %d\n", volt));
}
} else {
if (charging) {
charging = 0;
zapm_enable_charging(sc, 0);
timerclear(&sc->sc_lastbattchk);
DPRINTF(("zapm_poll: stop charging\n"));
}
sc->sc_batt_full = 0;
}
/*
* Restart charging once in a while. Discharge a few milliseconds
* before updating the voltage in our softc if A/C is connected.
*/
if (bc_lock && ratecheck(&sc->sc_lastbattchk, &zapm_battchkrate)) {
if (sc->sc_suspended) {
DPRINTF(("zapm_poll: suspended %lu %lu\n",
sc->sc_lastbattchk.tv_sec,
pxa2x0_rtc_getsecs()));
if (charging) {
zapm_enable_charging(sc, 0);
delay(15000);
zapm_enable_charging(sc, 1);
pxa2x0_rtc_setalarm(pxa2x0_rtc_getsecs() +
zapm_battchkrate.tv_sec + 1);
}
} else if (ac_on && sc->sc_batt_full == 0) {
DPRINTF(("zapm_poll: discharge on\n"));
if (charging)
zapm_enable_charging(sc, 0);
sc->sc_discharging = 1;
scoop_discharge_battery(1);
timeout_add(&sc->sc_poll, DISCHARGE_TIMEOUT);
} else if (!ac_on) {
volt = zapm_batt_volt();
DPRINTF(("zapm_poll: volt %d\n", volt));
}
}
/* Update the cached power state in our softc. */
if (ac_on != sc->sc_ac_on || charging != sc->sc_charging ||
volt != sc->sc_batt_volt) {
sc->sc_ac_on = ac_on;
sc->sc_charging = charging;
sc->sc_batt_volt = volt;
if (sc->sc_event == APM_NOEVENT)
sc->sc_event = APM_POWER_CHANGE;
}
/* Detect battery low conditions. */
if (!ac_on) {
if (zapm_batt_life(volt) < 5)
sc->sc_event = APM_BATTERY_LOW;
if (zapm_batt_state(volt) == APM_BATT_CRITICAL)
sc->sc_event = APM_CRIT_SUSPEND_REQ;
}
#ifdef APMDEBUG
if (sc->sc_event != APM_NOEVENT)
DPRINTF(("zapm_poll: power event %d\n", sc->sc_event));
#endif
splx(s);
}
/*
* Poll power-management related GPIO inputs, update battery life
* in softc, and/or control battery charging.
*/
static void
zapm_poll1(void *v, int do_suspend)
{
struct zapm_softc *sc = (struct zapm_softc *)v;
int ac_state;
int bc_lock;
int charging;
int volt;
if (!mutex_tryenter(&sc->sc_mtx))
return;
ac_state = zapm_get_ac_state(sc);
bc_lock = zapm_get_battery_compartment_state(sc);
/* Stop discharging. */
if (sc->discharging) {
sc->discharging = 0;
charging = 0;
volt = zapm_get_battery_volt();
DPRINTF(("zapm_poll: discharge off volt %d\n", volt));
} else {
charging = sc->battery_state & APM_BATT_FLAG_CHARGING;
volt = sc->battery_volt;
}
/* Start or stop charging as necessary. */
if (ac_state && bc_lock) {
int charge_completed = zapm_charge_complete(sc);
if (charging) {
if (charge_completed) {
DPRINTF(("zapm_poll: battery is full\n"));
charging = 0;
zapm_set_charging(sc, 0);
}
} else if (!charge_completed) {
charging = APM_BATT_FLAG_CHARGING;
volt = zapm_get_battery_volt();
zapm_set_charging(sc, 1);
DPRINTF(("zapm_poll: start charging volt %d\n", volt));
}
} else {
if (charging) {
charging = 0;
zapm_set_charging(sc, 0);
timerclear(&sc->sc_lastbattchk);
DPRINTF(("zapm_poll: stop charging\n"));
}
sc->battery_full_cnt = 0;
}
/*
* Restart charging once in a while. Discharge a few milliseconds
* before updating the voltage in our softc if A/C is connected.
*/
if (bc_lock && ratecheck(&sc->sc_lastbattchk, &zapm_battchkrate)) {
if (do_suspend && sc->suspended) {
/* XXX */
#if 0
DPRINTF(("zapm_poll: suspended %lu %lu\n",
sc->lastbattchk.tv_sec,
pxa2x0_rtc_getsecs()));
if (charging) {
zapm_set_charging(sc, 0);
delay(15000);
zapm_set_charging(sc, 1);
pxa2x0_rtc_setalarm(pxa2x0_rtc_getsecs() +
zapm_battchkrate.tv_sec + 1);
}
#endif
} else if (ac_state && sc->battery_full_cnt == 0) {
DPRINTF(("zapm_poll: discharge on\n"));
if (charging)
zapm_set_charging(sc, 0);
sc->discharging = 1;
if (ZAURUS_ISC1000 || ZAURUS_ISC3000)
scoop_discharge_battery(1);
callout_schedule(&sc->sc_discharge_poll,
DISCHARGE_TIMEOUT);
} else if (!ac_state) {
volt = zapm_get_battery_volt();
DPRINTF(("zapm_poll: volt %d\n", volt));
}
}
/* Update the cached power state in our softc. */
if ((ac_state != sc->ac_state)
|| (charging != (sc->battery_state & APM_BATT_FLAG_CHARGING))) {
config_hook_call(CONFIG_HOOK_PMEVENT,
CONFIG_HOOK_PMEVENT_AC,
(void *)((ac_state == APM_AC_OFF)
? CONFIG_HOOK_AC_OFF
: (charging ? CONFIG_HOOK_AC_ON_CHARGE
: CONFIG_HOOK_AC_ON_NOCHARGE)));
}
if (volt != sc->battery_volt) {
sc->battery_volt = volt;
sc->battery_life = zapm_battery_life(volt);
config_hook_call(CONFIG_HOOK_PMEVENT,
CONFIG_HOOK_PMEVENT_BATTERY,
(void *)zapm_battery_state(volt));
}
mutex_exit(&sc->sc_mtx);
}
