コード例 #1
0
void reader_init_zlibinflate(reader_t*r, reader_t*input)
{
#ifdef HAVE_ZLIB
    zlibinflate_t*z = (zlibinflate_t*)malloc(sizeof(zlibinflate_t));
    memset(z, 0, sizeof(zlibinflate_t));
    int ret;
    memset(r, 0, sizeof(reader_t));
    r->internal = z;
    r->read = reader_zlibinflate;
    r->seek = reader_zlibseek;
    r->dealloc = reader_zlibinflate_dealloc;
    r->type = READER_TYPE_ZLIB;
    r->pos = 0;
    z->input = input;
    memset(&z->zs,0,sizeof(z_stream));
    z->zs.zalloc = Z_NULL;
    z->zs.zfree  = Z_NULL;
    z->zs.opaque = Z_NULL;
    ret = inflateInit(&z->zs);
    if (ret != Z_OK) zlib_error(ret, "bitio:inflate_init", &z->zs);
    reader_resetbits(r);
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #2
0
void writer_init_zlibdeflate(writer_t*w, writer_t*output)
{
#ifdef HAVE_ZLIB
    zlibdeflate_t*z;
    int ret;
    memset(w, 0, sizeof(writer_t));
    z = (zlibdeflate_t*)malloc(sizeof(zlibdeflate_t));
    memset(z, 0, sizeof(zlibdeflate_t));
    w->internal = z;
    w->write = writer_zlibdeflate_write;
    w->flush = writer_zlibdeflate_flush;
    w->finish = writer_zlibdeflate_finish;
    w->type = WRITER_TYPE_ZLIB;
    w->pos = 0;
    z->output = output;
    memset(&z->zs,0,sizeof(z_stream));
    z->zs.zalloc = Z_NULL;
    z->zs.zfree  = Z_NULL;
    z->zs.opaque = Z_NULL;
    ret = deflateInit(&z->zs, 9);
    if (ret != Z_OK) zlib_error(ret, "bitio:deflate_init", &z->zs);
    w->bitpos = 0;
    w->mybyte = 0;
    z->zs.next_out = z->writebuffer;
    z->zs.avail_out = ZLIB_BUFFER_SIZE;
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #3
0
void writer_zlibdeflate_flush(writer_t*writer)
{
#ifdef HAVE_ZLIB
    zlibdeflate_t*z = (zlibdeflate_t*)writer->internal;
    int ret;
    if(writer->type != WRITER_TYPE_ZLIB) {
	fprintf(stderr, "Wrong writer ID (writer not initialized?)\n");
	return;
    }
    if(!z) {
	fprintf(stderr, "zlib not initialized!\n");
	return;
    }

    z->zs.next_in = 0;
    z->zs.avail_in = 0;
    while(1) {
	ret = deflate(&z->zs, Z_SYNC_FLUSH);
	if (ret != Z_OK) zlib_error(ret, "bitio:deflate_flush", &z->zs);
	if(z->zs.next_out != z->writebuffer) {
	    writer->pos += z->zs.next_out - (Bytef*)z->writebuffer;
	    z->output->write(z->output, z->writebuffer, z->zs.next_out - (Bytef*)z->writebuffer);
	    z->zs.next_out = z->writebuffer;
	    z->zs.avail_out = ZLIB_BUFFER_SIZE;
	} 
	/* TODO: how will zlib let us know it needs more buffer space? */
	break;
    }
    return;
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #4
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_decompressobj(PyObject *selfptr, PyObject *args)
{
    int wbits=DEF_WBITS, err;
    compobject *self;
    if (!PyArg_ParseTuple(args, "|i:decompressobj", &wbits))
        return NULL;

    self = newcompobject(&Decomptype);
    if (self == NULL)
        return(NULL);
    self->zst.zalloc = (alloc_func)NULL;
    self->zst.zfree = (free_func)Z_NULL;
    self->zst.next_in = NULL;
    self->zst.avail_in = 0;
    err = inflateInit2(&self->zst, wbits);
    switch(err) {
    case (Z_OK):
        self->is_initialised = 1;
        return (PyObject*)self;
    case(Z_STREAM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
        return NULL;
    case (Z_MEM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for decompression object");
        return NULL;
    default:
        zlib_error(self->zst, err, "while creating decompression object");
        Py_DECREF(self);
        return NULL;
    }
}
コード例 #5
0
static int reader_zlibinflate(reader_t*reader, void* data, int len) 
{
#ifdef HAVE_ZLIB
    zlibinflate_t*z = (zlibinflate_t*)reader->internal;
    int ret;
    if(!z) {
	return 0;
    }
    if(!len)
	return 0;
    
    z->zs.next_out = (Bytef *)data;
    z->zs.avail_out = len;

    while(1) {
	if(!z->zs.avail_in) {
	    z->zs.avail_in = z->input->read(z->input, z->readbuffer, ZLIB_BUFFER_SIZE);
	    z->zs.next_in = z->readbuffer;
	}
	if(z->zs.avail_in)
	    ret = inflate(&z->zs, Z_NO_FLUSH);
	else
	    ret = inflate(&z->zs, Z_FINISH);
    
	if (ret != Z_OK &&
	    ret != Z_STREAM_END) zlib_error(ret, "bitio:inflate_inflate", &z->zs);

	if (ret == Z_STREAM_END) {
		int pos = z->zs.next_out - (Bytef*)data;
		ret = inflateEnd(&z->zs);
		if (ret != Z_OK) zlib_error(ret, "bitio:inflate_end", &z->zs);
		free(reader->internal);
		reader->internal = 0;
		reader->pos += pos;
		return pos;
	}
	if(!z->zs.avail_out) {
	    break;
	}
    }
    reader->pos += len;
    return len;
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #6
0
ファイル: zlibmodule.c プロジェクト: Oize/pspstacklesspython
static PyObject *
PyZlib_unflush(compobject *self, PyObject *args)
{
    int err, length = DEFAULTALLOC;
    PyObject * retval = NULL;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "|i:flush", &length))
	return NULL;
    if (!(retval = PyString_FromStringAndSize(NULL, length)))
	return NULL;


    ENTER_ZLIB

    start_total_out = self->zst.total_out;
    self->zst.avail_out = length;
    self->zst.next_out = (Byte *)PyString_AS_STRING(retval);

    Py_BEGIN_ALLOW_THREADS
    err = inflate(&(self->zst), Z_FINISH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while ((err == Z_OK || err == Z_BUF_ERROR) && self->zst.avail_out == 0) {
	if (_PyString_Resize(&retval, length << 1) < 0)
	    goto error;
	self->zst.next_out = (Byte *)PyString_AS_STRING(retval) + length;
	self->zst.avail_out = length;
	length = length << 1;

	Py_BEGIN_ALLOW_THREADS
	err = inflate(&(self->zst), Z_FINISH);
	Py_END_ALLOW_THREADS
    }

    /* If flushmode is Z_FINISH, we also have to call deflateEnd() to free
       various data structures. Note we should only get Z_STREAM_END when
       flushmode is Z_FINISH */
    if (err == Z_STREAM_END) {
	err = inflateEnd(&(self->zst));
        self->is_initialised = 0;
	if (err != Z_OK) {
	    zlib_error(self->zst, err, "from inflateEnd()");
	    Py_DECREF(retval);
	    retval = NULL;
	    goto error;
	}
    }
    _PyString_Resize(&retval, self->zst.total_out - start_total_out);

error:

    LEAVE_ZLIB

    return retval;
}
コード例 #7
0
ファイル: zlibmodule.c プロジェクト: adintr/minipython
static PyObject *
PyZlib_objcompress(compobject *self, PyObject *args)
{
    int err, inplen;
    Py_ssize_t length = DEFAULTALLOC;
    PyObject *RetVal;
    Byte *input;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "s#:compress", &input, &inplen))
        return NULL;

    if (!(RetVal = PyString_FromStringAndSize(NULL, length)))
        return NULL;

    ENTER_ZLIB

    start_total_out = self->zst.total_out;
    self->zst.avail_in = inplen;
    self->zst.next_in = input;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = deflate(&(self->zst), Z_NO_FLUSH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while (err == Z_OK && self->zst.avail_out == 0) {
        if (_PyString_Resize(&RetVal, length << 1) < 0)
            goto error;
        self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
                             + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = deflate(&(self->zst), Z_NO_FLUSH);
        Py_END_ALLOW_THREADS
    }
    /* We will only get Z_BUF_ERROR if the output buffer was full but
       there wasn't more output when we tried again, so it is not an error
       condition.
    */

    if (err != Z_OK && err != Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while compressing");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }
    _PyString_Resize(&RetVal, self->zst.total_out - start_total_out);

error:
    LEAVE_ZLIB
    return RetVal;
}
コード例 #8
0
static void writer_zlibdeflate_finish(writer_t*writer)
{
#ifdef HAVE_ZLIB
    zlibdeflate_t*z = (zlibdeflate_t*)writer->internal;
    writer_t*output;
    int ret;
    if(writer->type != WRITER_TYPE_ZLIB) {
	fprintf(stderr, "Wrong writer ID (writer not initialized?)\n");
	return;
    }
    if(!z)
	return;
    output= z->output;
    while(1) {
	ret = deflate(&z->zs, Z_FINISH);
	if (ret != Z_OK &&
	    ret != Z_STREAM_END) zlib_error(ret, "bitio:deflate_finish", &z->zs);

	if(z->zs.next_out != z->writebuffer) {
	    writer->pos += z->zs.next_out - (Bytef*)z->writebuffer;
	    z->output->write(z->output, z->writebuffer, z->zs.next_out - (Bytef*)z->writebuffer);
	    z->zs.next_out = z->writebuffer;
	    z->zs.avail_out = ZLIB_BUFFER_SIZE;
	}

	if (ret == Z_STREAM_END) {
	    break;

	}
    }
    ret = deflateEnd(&z->zs);
    if (ret != Z_OK) zlib_error(ret, "bitio:deflate_end", &z->zs);
    free(writer->internal);
    memset(writer, 0, sizeof(writer_t));
    //output->finish(output); 
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #9
0
ファイル: zlib_compress.c プロジェクト: ajdavis/mongo
/*
 * zlib_compress --
 *	WiredTiger zlib compression.
 */
static int
zlib_compress(WT_COMPRESSOR *compressor, WT_SESSION *session,
    uint8_t *src, size_t src_len,
    uint8_t *dst, size_t dst_len,
    size_t *result_lenp, int *compression_failed)
{
	ZLIB_COMPRESSOR *zlib_compressor;
	ZLIB_OPAQUE opaque;
	z_stream zs;
	int ret;

	zlib_compressor = (ZLIB_COMPRESSOR *)compressor;

	memset(&zs, 0, sizeof(zs));
	zs.zalloc = zalloc;
	zs.zfree = zfree;
	opaque.compressor = compressor;
	opaque.session = session;
	zs.opaque = &opaque;

	if ((ret = deflateInit(&zs, zlib_compressor->zlib_level)) != Z_OK)
		return (zlib_error(compressor, session, "deflateInit", ret));

	zs.next_in = src;
	zs.avail_in = (uint32_t)src_len;
	zs.next_out = dst;
	zs.avail_out = (uint32_t)dst_len;
	if (deflate(&zs, Z_FINISH) == Z_STREAM_END) {
		*compression_failed = 0;
		*result_lenp = (size_t)zs.total_out;
	} else
		*compression_failed = 1;

	if ((ret = deflateEnd(&zs)) != Z_OK && ret != Z_DATA_ERROR)
		return (zlib_error(compressor, session, "deflateEnd", ret));

	return (0);
}
コード例 #10
0
ファイル: zlib.cpp プロジェクト: LancelotGHX/Simula
void zlib_error::check BOOST_PREVENT_MACRO_SUBSTITUTION(int error)
{
    switch (error) {
    case Z_OK: 
    case Z_STREAM_END: 
    //case Z_BUF_ERROR: 
        return;
    case Z_MEM_ERROR: 
        boost::throw_exception(std::bad_alloc());
    default:
        boost::throw_exception(zlib_error(error));
        ;
    }
}
コード例 #11
0
ファイル: zlib.cpp プロジェクト: AG-Dev/wesnoth_ios
void zlib_error::check(int error)
{
    switch (error) {
    case Z_OK: 
    case Z_STREAM_END: 
    //case Z_BUF_ERROR: 
        return;
    case Z_MEM_ERROR: 
        throw std::bad_alloc();
    default:
        throw zlib_error(error);
        ;
    }
}
コード例 #12
0
ファイル: zlib_compress.c プロジェクト: ajdavis/mongo
/*
 * zlib_decompress --
 *	WiredTiger zlib decompression.
 */
static int
zlib_decompress(WT_COMPRESSOR *compressor, WT_SESSION *session,
    uint8_t *src, size_t src_len,
    uint8_t *dst, size_t dst_len,
    size_t *result_lenp)
{
	ZLIB_OPAQUE opaque;
	z_stream zs;
	int ret, tret;

	memset(&zs, 0, sizeof(zs));
	zs.zalloc = zalloc;
	zs.zfree = zfree;
	opaque.compressor = compressor;
	opaque.session = session;
	zs.opaque = &opaque;

	if ((ret = inflateInit(&zs)) != Z_OK)
		return (zlib_error(compressor, session, "inflateInit", ret));

	zs.next_in = src;
	zs.avail_in = (uint32_t)src_len;
	zs.next_out = dst;
	zs.avail_out = (uint32_t)dst_len;
	while ((ret = inflate(&zs, Z_FINISH)) == Z_OK)
		;
	if (ret == Z_STREAM_END) {
		*result_lenp = (size_t)zs.total_out;
		ret = Z_OK;
	}

	if ((tret = inflateEnd(&zs)) != Z_OK && ret == Z_OK)
		ret = tret;

	return (ret == Z_OK ?
	    0 : zlib_error(compressor, session, "inflate", ret));
}
コード例 #13
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_uncopy(compobject *self)
{
    compobject *retval = NULL;
    int err;

    retval = newcompobject(&Decomptype);
    if (!retval) return NULL;

    /* Copy the zstream state
     * We use ENTER_ZLIB / LEAVE_ZLIB to make this thread-safe
     */
    ENTER_ZLIB(self);
    err = inflateCopy(&retval->zst, &self->zst);
    switch(err) {
    case(Z_OK):
        break;
    case(Z_STREAM_ERROR):
        PyErr_SetString(PyExc_ValueError, "Inconsistent stream state");
        goto error;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for decompression object");
        goto error;
    default:
        zlib_error(self->zst, err, "while copying decompression object");
        goto error;
    }

    Py_INCREF(self->unused_data);
    Py_INCREF(self->unconsumed_tail);
    Py_XDECREF(retval->unused_data);
    Py_XDECREF(retval->unconsumed_tail);
    retval->unused_data = self->unused_data;
    retval->unconsumed_tail = self->unconsumed_tail;
    retval->eof = self->eof;

    /* Mark it as being initialized */
    retval->is_initialised = 1;

    LEAVE_ZLIB(self);
    return (PyObject *)retval;

error:
    LEAVE_ZLIB(self);
    Py_XDECREF(retval);
    return NULL;
}
コード例 #14
0
ファイル: ZLib.cpp プロジェクト: delahee/hxlibc
/**
	deflate_init : level:int -> 'dstream
	<doc>Open a compression stream with the given level of compression</doc>
**/
static value deflate_init( value level ) {
	z_stream *z;
	value s;
	int err;
	val_check(level,int);
	z = (z_stream*)malloc(sizeof(z_stream) + sizeof(int));
	memset(z,0,sizeof(z_stream));
	val_flush(z) = Z_NO_FLUSH;
	if( (err = deflateInit(z,val_int(level))) != Z_OK ) {
		free(z);
		zlib_error(NULL,err);
	}
	s = alloc_abstract(k_stream_def,z);
	//val_gc(s,free_stream_def);
	return s;
}
コード例 #15
0
ファイル: fmt.c プロジェクト: HaxeFoundation/hl
HL_PRIM fmt_zip *HL_NAME(deflate_init)( int level ) {
	z_stream *z;
	int err;
	fmt_zip *s;
	z = (z_stream*)malloc(sizeof(z_stream));
	memset(z,0,sizeof(z_stream));
	if( (err = deflateInit(z,level)) != Z_OK ) {
		free(z);
		zlib_error(NULL,err);
	}
	s = (fmt_zip*)hl_gc_alloc_finalizer(sizeof(fmt_zip));
	s->finalize = free_stream_inf;
	s->flush = Z_NO_FLUSH;
	s->z = z;
	s->inflate = false;
	return s;
}
コード例 #16
0
ファイル: fmt.c プロジェクト: HaxeFoundation/hl
HL_PRIM bool HL_NAME(deflate_buffer)( fmt_zip *zip, vbyte *src, int srcpos, int srclen, vbyte *dst, int dstpos, int dstlen, int *read, int *write ) {
	int slen, dlen, err;
	z_stream *z = zip->z;
	slen = srclen - srcpos;
	dlen = dstlen - dstpos;
	if( srcpos < 0 || dstpos < 0 || slen < 0 || dlen < 0 )
		hl_error("Out of range");
	z->next_in = (Bytef*)(src + srcpos);
	z->next_out = (Bytef*)(dst + dstpos);
	z->avail_in = slen;
	z->avail_out = dlen;
	if( (err = deflate(z,zip->flush)) < 0 )
		zlib_error(z,err);
	z->next_in = NULL;
	z->next_out = NULL;
	*read = slen - z->avail_in;
	*write = dlen - z->avail_out;
	return err == Z_STREAM_END;
}
コード例 #17
0
ファイル: fmt.c プロジェクト: HaxeFoundation/hl
HL_PRIM fmt_zip *HL_NAME(inflate_init)( int wbits ) {
	z_stream *z;
	int err;
	fmt_zip *s;
	if( wbits == 0 )
		wbits = MAX_WBITS;
	z = (z_stream*)malloc(sizeof(z_stream));
	memset(z,0,sizeof(z_stream));
	if( (err = inflateInit2(z,wbits)) != Z_OK ) {
		free(z);
		zlib_error(NULL,err);
	}
	s = (fmt_zip*)hl_gc_alloc_finalizer(sizeof(fmt_zip));
	s->finalize = free_stream_inf;
	s->flush = Z_NO_FLUSH;
	s->z = z;
	s->inflate = true;
	return s;
}
コード例 #18
0
ファイル: compress.cpp プロジェクト: Botrix/pentago
Array<uint8_t> compress(RawArray<const uint8_t> data, int level, event_t event) {
  thread_time_t time(compress_kind,event);
  if (level<20) { // zlib
    size_t dest_size = compressBound(data.size());
    Array<uint8_t> compressed(CHECK_CAST_INT(dest_size),uninit);
    int z = compress2(compressed.data(),&dest_size,(uint8_t*)data.data(),data.size(),level);
    if (z!=Z_OK)
      THROW(IOError,"zlib failure in compress_and_write: %s",zlib_error(z));
    return compressed.slice_own(0,CHECK_CAST_INT(dest_size));
  } else { // lzma
    size_t dest_size = lzma_stream_buffer_bound(data.size());
    Array<uint8_t> compressed(CHECK_CAST_INT(dest_size),uninit);
    size_t pos = 0;
    lzma_ret r = lzma_easy_buffer_encode(level-20,LZMA_CHECK_CRC64,0,data.data(),data.size(),compressed.data(),&pos,dest_size);
    if (r!=LZMA_OK)
      THROW(RuntimeError,"lzma compression error: %s (%d)",lzma_error(r),r);
    return compressed.slice_own(0,CHECK_CAST_INT(pos));
  }
}
コード例 #19
0
static int writer_zlibdeflate_write(writer_t*writer, void* data, int len) 
{
#ifdef HAVE_ZLIB
    zlibdeflate_t*z = (zlibdeflate_t*)writer->internal;
    int ret;
    if(writer->type != WRITER_TYPE_ZLIB) {
	fprintf(stderr, "Wrong writer ID (writer not initialized?)\n");
	return 0;
    }
    if(!z) {
	fprintf(stderr, "zlib not initialized!\n");
	return 0;
    }
    if(!len)
	return 0;
    
    z->zs.next_in = (Bytef *)data;
    z->zs.avail_in = len;

    while(1) {
	ret = deflate(&z->zs, Z_NO_FLUSH);
	
	if (ret != Z_OK) zlib_error(ret, "bitio:deflate_deflate", &z->zs);

	if(z->zs.next_out != z->writebuffer) {
	    writer->pos += z->zs.next_out - (Bytef*)z->writebuffer;
	    z->output->write(z->output, z->writebuffer, z->zs.next_out - (Bytef*)z->writebuffer);
	    z->zs.next_out = z->writebuffer;
	    z->zs.avail_out = ZLIB_BUFFER_SIZE;
	}

	if(!z->zs.avail_in) {
	    break;
	}
    }
    return len;
#else
    fprintf(stderr, "Error: swftools was compiled without zlib support");
    exit(1);
#endif
}
コード例 #20
0
ファイル: compress.cpp プロジェクト: Botrix/pentago
Array<uint8_t> decompress(RawArray<const uint8_t> compressed, const size_t uncompressed_size, event_t event) {
  GEODE_ASSERT(uncompressed_size<(uint64_t)1<<31);
  thread_time_t time(decompress_kind,event);
  size_t dest_size = uncompressed_size;
  Array<uint8_t> uncompressed = aligned_buffer<uint8_t>(CHECK_CAST_INT(dest_size));
  if (!is_lzma(compressed)) { // zlib
    int z = uncompress((uint8_t*)uncompressed.data(),&dest_size,compressed.data(),compressed.size());
    if (z!=Z_OK)
      THROW(IOError,"zlib failure in read_and_uncompress: %s",zlib_error(z));
  } else { // lzma
    const uint32_t flags = LZMA_TELL_NO_CHECK | LZMA_TELL_UNSUPPORTED_CHECK;
    uint64_t memlimit = UINT64_MAX;
    size_t in_pos = 0, out_pos = 0;
    lzma_ret r = lzma_stream_buffer_decode(&memlimit,flags,0,compressed.data(),&in_pos,compressed.size(),uncompressed.data(),&out_pos,dest_size);
    if (r!=LZMA_OK)
      THROW(IOError,"lzma failure in read_and_uncompress: %s (%d)",lzma_error(r),r);
  }
  if (dest_size != uncompressed_size)
    THROW(IOError,"read_and_compress: expected uncompressed size %zu, got %zu",uncompressed_size,dest_size);
  return uncompressed;
}
コード例 #21
0
ファイル: ZLib.cpp プロジェクト: delahee/hxlibc
/**
	inflate_buffer : 'istream -> src:string -> srcpos:int -> dst:string -> dstpos:int -> { done => bool, read => int, write => int }
**/
static value inflate_buffer( value s, value src, value srcpos, value dst, value dstpos ) {
	z_stream *z;
	int err;
	value o;
	val_check_kind(s,k_stream_inf);
	val_check(srcpos,int);

	buffer src_buf = val_to_buffer(src);
	if (!src_buf)
	   hx_failure("invalid source buffer");
	buffer dst_buf = val_to_buffer(dst);
	if (!dst_buf)
	   hx_failure("invalid destination buffer");

	int slen = buffer_size(src_buf);
	int dlen = buffer_size(dst_buf);

	val_check(dstpos,int);
	z = val_stream(s);
	if( val_int(srcpos) < 0 || val_int(dstpos) < 0 )
		return alloc_null();
	slen -= val_int(srcpos);
	dlen -= val_int(dstpos);
	if( slen < 0 || dlen < 0 )
		return alloc_null();

	z->next_in = (Bytef*)buffer_data(src_buf) + val_int(srcpos);
	z->next_out = (Bytef*)buffer_data(dst_buf) + val_int(dstpos);
	z->avail_in = slen;
	z->avail_out = dlen;
	if( (err = inflate(z,val_flush(z))) < 0 )
		zlib_error(z,err);
	z->next_in = NULL;
	z->next_out = NULL;
	o = alloc_empty_object();
	alloc_field(o,id_done,alloc_bool(err == Z_STREAM_END));
	alloc_field(o,id_read,alloc_int((int)(slen - z->avail_in)));
	alloc_field(o,id_write,alloc_int((int)(dlen - z->avail_out)));
	return o;
}
コード例 #22
0
ファイル: ZLib.cpp プロジェクト: delahee/hxlibc
/**
	inflate_init : window_size:int? -> 'istream
	<doc>Open a decompression stream</doc>
**/
static value inflate_init( value wsize ) {
	z_stream *z;
	value s;
	int err;
	int wbits;
	if( val_is_null(wsize) )
		wbits = MAX_WBITS;
	else {
		val_check(wsize,int);
		wbits = val_int(wsize);
	}
	z = (z_stream*)malloc(sizeof(z_stream) + sizeof(int));
	memset(z,0,sizeof(z_stream));
	val_flush(z) = Z_NO_FLUSH;
	if( (err = inflateInit2(z,wbits)) != Z_OK ) {
		free(z);
		zlib_error(NULL,err);
	}
	s = alloc_abstract(k_stream_inf,z);
	//val_gc(s,free_stream_inf);
	return s;
}
コード例 #23
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_compressobj(PyObject *selfptr, PyObject *args)
{
    compobject *self;
    int level=Z_DEFAULT_COMPRESSION, method=DEFLATED;
    int wbits=MAX_WBITS, memLevel=DEF_MEM_LEVEL, strategy=0, err;

    if (!PyArg_ParseTuple(args, "|iiiii:compressobj", &level, &method, &wbits,
                          &memLevel, &strategy))
        return NULL;

    self = newcompobject(&Comptype);
    if (self==NULL)
        return(NULL);
    self->zst.zalloc = (alloc_func)NULL;
    self->zst.zfree = (free_func)Z_NULL;
    self->zst.next_in = NULL;
    self->zst.avail_in = 0;
    err = deflateInit2(&self->zst, level, method, wbits, memLevel, strategy);
    switch(err) {
    case (Z_OK):
        self->is_initialised = 1;
        return (PyObject*)self;
    case (Z_MEM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory for compression object");
        return NULL;
    case(Z_STREAM_ERROR):
        Py_DECREF(self);
        PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
        return NULL;
    default:
        zlib_error(self->zst, err, "while creating compression object");
        Py_DECREF(self);
        return NULL;
    }
}
コード例 #24
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_compress(PyObject *self, PyObject *args)
{
    PyObject *ReturnVal = NULL;
    Py_buffer pinput;
    Byte *input, *output = NULL;
    unsigned int length;
    int level=Z_DEFAULT_COMPRESSION, err;
    z_stream zst;

    /* require Python string object, optional 'level' arg */
    if (!PyArg_ParseTuple(args, "y*|i:compress", &pinput, &level))
        return NULL;

    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error;
    }
    input = pinput.buf;
    length = pinput.len;

    zst.avail_out = length + length/1000 + 12 + 1;

    output = (Byte*)malloc(zst.avail_out);
    if (output == NULL) {
        PyErr_SetString(PyExc_MemoryError,
                        "Can't allocate memory to compress data");
        goto error;
    }

    /* Past the point of no return.  From here on out, we need to make sure
       we clean up mallocs & INCREFs. */

    zst.zalloc = (alloc_func)NULL;
    zst.zfree = (free_func)Z_NULL;
    zst.next_out = (Byte *)output;
    zst.next_in = (Byte *)input;
    zst.avail_in = length;
    err = deflateInit(&zst, level);

    switch(err) {
    case(Z_OK):
        break;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Out of memory while compressing data");
        goto error;
    case(Z_STREAM_ERROR):
        PyErr_SetString(ZlibError,
                        "Bad compression level");
        goto error;
    default:
        deflateEnd(&zst);
        zlib_error(zst, err, "while compressing data");
        goto error;
    }

    Py_BEGIN_ALLOW_THREADS;
    err = deflate(&zst, Z_FINISH);
    Py_END_ALLOW_THREADS;

    if (err != Z_STREAM_END) {
        zlib_error(zst, err, "while compressing data");
        deflateEnd(&zst);
        goto error;
    }

    err=deflateEnd(&zst);
    if (err == Z_OK)
        ReturnVal = PyBytes_FromStringAndSize((char *)output,
                                              zst.total_out);
    else
        zlib_error(zst, err, "while finishing compression");

 error:
    PyBuffer_Release(&pinput);
    free(output);

    return ReturnVal;
}
コード例 #25
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_decompress(PyObject *self, PyObject *args)
{
    PyObject *result_str = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned int length;
    int err;
    int wsize=DEF_WBITS;
    Py_ssize_t r_strlen=DEFAULTALLOC;
    z_stream zst;

    if (!PyArg_ParseTuple(args, "y*|in:decompress",
                          &pinput, &wsize, &r_strlen))
        return NULL;

    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error;
    }
    input = pinput.buf;
    length = pinput.len;

    if (r_strlen <= 0)
        r_strlen = 1;

    zst.avail_in = length;
    zst.avail_out = r_strlen;

    if (!(result_str = PyBytes_FromStringAndSize(NULL, r_strlen)))
        goto error;

    zst.zalloc = (alloc_func)NULL;
    zst.zfree = (free_func)Z_NULL;
    zst.next_out = (Byte *)PyBytes_AS_STRING(result_str);
    zst.next_in = (Byte *)input;
    err = inflateInit2(&zst, wsize);

    switch(err) {
    case(Z_OK):
        break;
    case(Z_MEM_ERROR):
        PyErr_SetString(PyExc_MemoryError,
                        "Out of memory while decompressing data");
        goto error;
    default:
        inflateEnd(&zst);
        zlib_error(zst, err, "while preparing to decompress data");
        goto error;
    }

    do {
        Py_BEGIN_ALLOW_THREADS
        err=inflate(&zst, Z_FINISH);
        Py_END_ALLOW_THREADS

        switch(err) {
        case(Z_STREAM_END):
            break;
        case(Z_BUF_ERROR):
            /*
             * If there is at least 1 byte of room according to zst.avail_out
             * and we get this error, assume that it means zlib cannot
             * process the inflate call() due to an error in the data.
             */
            if (zst.avail_out > 0) {
                zlib_error(zst, err, "while decompressing data");
                inflateEnd(&zst);
                goto error;
            }
            /* fall through */
        case(Z_OK):
            /* need more memory */
            if (_PyBytes_Resize(&result_str, r_strlen << 1) < 0) {
                inflateEnd(&zst);
                goto error;
            }
            zst.next_out =
                (unsigned char *)PyBytes_AS_STRING(result_str) + r_strlen;
            zst.avail_out = r_strlen;
            r_strlen = r_strlen << 1;
            break;
        default:
            inflateEnd(&zst);
            zlib_error(zst, err, "while decompressing data");
            goto error;
        }
    } while (err != Z_STREAM_END);

    err = inflateEnd(&zst);
    if (err != Z_OK) {
        zlib_error(zst, err, "while finishing decompression");
        goto error;
    }

    if (_PyBytes_Resize(&result_str, zst.total_out) < 0)
        goto error;

    PyBuffer_Release(&pinput);
    return result_str;

 error:
    PyBuffer_Release(&pinput);
    Py_XDECREF(result_str);
    return NULL;
}
コード例 #26
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_objcompress(compobject *self, PyObject *args)
{
    int err;
    unsigned int inplen;
    Py_ssize_t length = DEFAULTALLOC;
    PyObject *RetVal = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "y*:compress", &pinput))
        return NULL;
    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error_outer;
    }
    input = pinput.buf;
    inplen = pinput.len;

    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        goto error_outer;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = inplen;
    self->zst.next_in = input;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = deflate(&(self->zst), Z_NO_FLUSH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while (err == Z_OK && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&RetVal, length << 1) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = deflate(&(self->zst), Z_NO_FLUSH);
        Py_END_ALLOW_THREADS
    }
    /* We will only get Z_BUF_ERROR if the output buffer was full but
       there wasn't more output when we tried again, so it is not an error
       condition.
    */

    if (err != Z_OK && err != Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while compressing data");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }
    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);
 error_outer:
    PyBuffer_Release(&pinput);
    return RetVal;
}
コード例 #27
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_objdecompress(compobject *self, PyObject *args)
{
    int err, max_length = 0;
    unsigned int inplen;
    Py_ssize_t old_length, length = DEFAULTALLOC;
    PyObject *RetVal = NULL;
    Py_buffer pinput;
    Byte *input;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "y*|i:decompress", &pinput,
                          &max_length))
        return NULL;
    if (pinput.len > UINT_MAX) {
        PyErr_SetString(PyExc_OverflowError,
                        "Size does not fit in an unsigned int");
        goto error_outer;
    }
    input = pinput.buf;
    inplen = pinput.len;
    if (max_length < 0) {
        PyErr_SetString(PyExc_ValueError,
                        "max_length must be greater than zero");
        goto error_outer;
    }

    /* limit amount of data allocated to max_length */
    if (max_length && length > max_length)
        length = max_length;
    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        goto error_outer;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = inplen;
    self->zst.next_in = input;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = inflate(&(self->zst), Z_SYNC_FLUSH);
    Py_END_ALLOW_THREADS

    /* While Z_OK and the output buffer is full, there might be more output.
       So extend the output buffer and try again.
    */
    while (err == Z_OK && self->zst.avail_out == 0) {
        /* If max_length set, don't continue decompressing if we've already
           reached the limit.
        */
        if (max_length && length >= max_length)
            break;

        /* otherwise, ... */
        old_length = length;
        length = length << 1;
        if (max_length && length > max_length)
            length = max_length;

        if (_PyBytes_Resize(&RetVal, length) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + old_length;
        self->zst.avail_out = length - old_length;

        Py_BEGIN_ALLOW_THREADS
        err = inflate(&(self->zst), Z_SYNC_FLUSH);
        Py_END_ALLOW_THREADS
    }

    if(max_length) {
        /* Not all of the compressed data could be accommodated in a buffer of
           the specified size. Return the unconsumed tail in an attribute. */
        Py_DECREF(self->unconsumed_tail);
        self->unconsumed_tail = PyBytes_FromStringAndSize((char *)self->zst.next_in,
                                                           self->zst.avail_in);
    }
    else if (PyBytes_GET_SIZE(self->unconsumed_tail) > 0) {
        /* All of the compressed data was consumed. Clear unconsumed_tail. */
        Py_DECREF(self->unconsumed_tail);
        self->unconsumed_tail = PyBytes_FromStringAndSize("", 0);
    }
    if (self->unconsumed_tail == NULL) {
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    /* The end of the compressed data has been reached, so set the
       unused_data attribute to a string containing the remainder of the
       data in the string.  Note that this is also a logical place to call
       inflateEnd, but the old behaviour of only calling it on flush() is
       preserved.
    */
    if (err == Z_STREAM_END) {
        Py_XDECREF(self->unused_data);  /* Free original empty string */
        self->unused_data = PyBytes_FromStringAndSize(
            (char *)self->zst.next_in, self->zst.avail_in);
        if (self->unused_data == NULL) {
            Py_DECREF(RetVal);
            goto error;
        }
        self->eof = 1;
        /* We will only get Z_BUF_ERROR if the output buffer was full
           but there wasn't more output when we tried again, so it is
           not an error condition.
        */
    } else if (err != Z_OK && err != Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while decompressing data");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);
 error_outer:
    PyBuffer_Release(&pinput);
    return RetVal;
}
コード例 #28
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_flush(compobject *self, PyObject *args)
{
    int err, length = DEFAULTALLOC;
    PyObject *RetVal;
    int flushmode = Z_FINISH;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "|i:flush", &flushmode))
        return NULL;

    /* Flushing with Z_NO_FLUSH is a no-op, so there's no point in
       doing any work at all; just return an empty string. */
    if (flushmode == Z_NO_FLUSH) {
        return PyBytes_FromStringAndSize(NULL, 0);
    }

    if (!(RetVal = PyBytes_FromStringAndSize(NULL, length)))
        return NULL;

    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_in = 0;
    self->zst.avail_out = length;
    self->zst.next_out = (unsigned char *)PyBytes_AS_STRING(RetVal);

    Py_BEGIN_ALLOW_THREADS
    err = deflate(&(self->zst), flushmode);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while (err == Z_OK && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&RetVal, length << 1) < 0) {
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        self->zst.next_out =
            (unsigned char *)PyBytes_AS_STRING(RetVal) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = deflate(&(self->zst), flushmode);
        Py_END_ALLOW_THREADS
    }

    /* If flushmode is Z_FINISH, we also have to call deflateEnd() to free
       various data structures. Note we should only get Z_STREAM_END when
       flushmode is Z_FINISH, but checking both for safety*/
    if (err == Z_STREAM_END && flushmode == Z_FINISH) {
        err = deflateEnd(&(self->zst));
        if (err != Z_OK) {
            zlib_error(self->zst, err, "while finishing compression");
            Py_DECREF(RetVal);
            RetVal = NULL;
            goto error;
        }
        else
            self->is_initialised = 0;

        /* We will only get Z_BUF_ERROR if the output buffer was full
           but there wasn't more output when we tried again, so it is
           not an error condition.
        */
    } else if (err!=Z_OK && err!=Z_BUF_ERROR) {
        zlib_error(self->zst, err, "while flushing");
        Py_DECREF(RetVal);
        RetVal = NULL;
        goto error;
    }

    if (_PyBytes_Resize(&RetVal, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(RetVal);
        RetVal = NULL;
    }

 error:
    LEAVE_ZLIB(self);

    return RetVal;
}
コード例 #29
0
ファイル: zlibmodule.c プロジェクト: Naddiseo/cpython
static PyObject *
PyZlib_unflush(compobject *self, PyObject *args)
{
    int err, length = DEFAULTALLOC;
    PyObject * retval = NULL;
    unsigned long start_total_out;

    if (!PyArg_ParseTuple(args, "|i:flush", &length))
        return NULL;
    if (length <= 0) {
        PyErr_SetString(PyExc_ValueError, "length must be greater than zero");
        return NULL;
    }
    if (!(retval = PyBytes_FromStringAndSize(NULL, length)))
        return NULL;


    ENTER_ZLIB(self);

    start_total_out = self->zst.total_out;
    self->zst.avail_out = length;
    self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval);

    Py_BEGIN_ALLOW_THREADS
    err = inflate(&(self->zst), Z_FINISH);
    Py_END_ALLOW_THREADS

    /* while Z_OK and the output buffer is full, there might be more output,
       so extend the output buffer and try again */
    while ((err == Z_OK || err == Z_BUF_ERROR) && self->zst.avail_out == 0) {
        if (_PyBytes_Resize(&retval, length << 1) < 0) {
            Py_DECREF(retval);
            retval = NULL;
            goto error;
        }
        self->zst.next_out = (Byte *)PyBytes_AS_STRING(retval) + length;
        self->zst.avail_out = length;
        length = length << 1;

        Py_BEGIN_ALLOW_THREADS
        err = inflate(&(self->zst), Z_FINISH);
        Py_END_ALLOW_THREADS
    }

    /* If at end of stream, clean up any memory allocated by zlib. */
    if (err == Z_STREAM_END) {
        self->eof = 1;
        self->is_initialised = 0;
        err = inflateEnd(&(self->zst));
        if (err != Z_OK) {
            zlib_error(self->zst, err, "while finishing decompression");
            Py_DECREF(retval);
            retval = NULL;
            goto error;
        }
    }
    if (_PyBytes_Resize(&retval, self->zst.total_out - start_total_out) < 0) {
        Py_DECREF(retval);
        retval = NULL;
    }

error:

    LEAVE_ZLIB(self);

    return retval;
}
コード例 #30
0
ファイル: cppzlib.hpp プロジェクト: dmlys/extlib
	BOOST_NORETURN inline void throw_zlib_error(int code, const char * msg) { throw zlib_error(code, msg); }